1 A Copper bar is 120m long at 0°c What is the increase in length when it is heated at 40°c The Linear expansion for Copper is 1.7x10^-5/℃​

In football, we see reactive forces when one player exerts a force on another and causes him to change his direction and/or speed. Reactive forces in football occur when one player applies a force on another during a collision or contact.

These forces are a consequence of Newton's third law of motion, which states that for every action, there is an equal and opposite reaction. When a player exerts a force on another player, the second player experiences an equal and opposite force, resulting in a change in direction or speed. This can happen during tackles, challenges for the ball, or even during collisions between players. Reactive forces play a crucial role in the dynamics of football and are essential in understanding the physical interactions that take place on the field.In football, we see reactive forces when one player exerts a force on another and causes him to change his direction and/or speed. Reactive forces in football occur when one player applies a force on another during a collision or contact.

learn more about forces here:

https://brainly.com/question/15995522

#SPJ11

The average speed of gas particles is directly proportional to the square root of their absolute temperature. To determine the temperature at which oxygen (O2) has the same average speed as hydrogen (H2) does at 273 K, we can use the formula:

(v1 / v2) = √(T1 / T2),

where v1 and v2 are the average speeds of the two gases, and T1 and T2 are their respective temperatures.

Given that the average speed of hydrogen (H2) at 273 K is equal to v2, we need to find the temperature (T1) at which the average speed of oxygen (O2) matches this value.

Rearranging the formula, we get:

(T1 / T2) = (v1 / v2)^2.

Since oxygen and hydrogen have the same molar mass, we can assume their average speeds are the same.

(v1 / v2) = 1.

Thus, (T1 / T2) = (1 / 1)^2 = 1.

Therefore, oxygen (O2) will have the same average speed as hydrogen (H2) does at 273 K. In other words, the temperature at which oxygen's average speed matches that of hydrogen at 273 K is also 273 K.

To know more about speed of gas particle click this link-

https://brainly.com/question/30582772

#SPJ11

The Arrhenius equation relates the rate constant (k) of a reaction to the temperature (T), the activation energy (a), and the frequency factor (A):

[tex]k = A * exp(-a / (R * T))[/tex]

where R is the gas constant.

We can rearrange this equation to solve for the activation energy:

a = -ln(k/A) * R * T

Substituting the known values:

k = 0.295 s^-1

A = 1.20 × 10^11 s^-1

T = 65.0 °C = 338.2 K (remember to convert to kelvin)

R = 8.314 J/(mol*K)

a = -ln((0.295 s^-1) / (1.20 × 10^11 s^-1)) * (8.314 J/(mol*K)) * (338.2 K)

a = 147.4 kJ/mol

Therefore, the activation energy is 147.4 kJ/mol.

To know more about refer  Arrhenius equation here

brainly.com/question/30514582#

#SPJ11

The absolute square of Ψ(x, t) is equal to the absolute square of Ψ(x) multiplied by the square of the sine of ωt.

To compute |Ψ(x, t)|^2 for the function Ψ(x, t) = Ψ(x)sin(ωt), we need to take the absolute square of the function. The absolute square, denoted as |Ψ(x, t)|^2, represents the probability density of finding a particle at a given position and time. In this case, we have Ψ(x) as the spatial part of the wave function and sin(ωt) as the time-dependent part, where ω is a real constant. Taking the absolute square of Ψ(x, t), we obtain |Ψ(x)|^2 * sin^2(ωt). Therefore, |Ψ(x, t)|^2 is given by the product of the absolute square of Ψ(x) and the square of the sine of ωt. This expression provides the probability density distribution of the particle over position and time.

Learn more about function here:

https://brainly.com/question/30721594

#SPJ11

The total binding energy for ⁴⁰Ar is 342.8 MeV. The total binding energy of an atomic nucleus is the amount of energy required to completely separate all of its individual nucleons (protons and neutrons) from each other.

TThis energy can be calculated using the Einstein's famous equation E=mc², where E is the energy, m is the mass difference between the nucleus and its individual nucleons, and c is the speed of light.

To calculate the total binding energy of ⁴⁰Ar, we first need to know its mass. The mass of ⁴⁰Ar is 39.9623831237 atomic mass units (amu). Next, we need to calculate the mass of its individual nucleons.

The mass of a proton is 1.007276 amu and the mass of a neutron is 1.008665 amu. Multiplying the number of protons (18) and neutrons (22) by their respective masses and adding them together, we get a total mass of 37.704379 amu for the nucleons in ⁴⁰Ar.

The mass difference between ⁴⁰Ar and its individual nucleons is then 39.9623831237 amu - 37.704379 amu = 2.2580041237 amu. Converting this mass difference to energy using E=mc², we get a total binding energy of 342.8 MeV.

To know more about binding energy, refer here:

https://brainly.com/question/15718710#

#SPJ11

Velocity of electron with 270.8 pm de Broglie wavelength is 6.25 x [tex]10^{6}[/tex]m/s.

To calculate the velocity of an electron with a de Broglie wavelength of 270.8 pm, we can use the formula v = h/λm, where h is the Planck constant, λ is the de Broglie wavelength, and m is the mass of the particle.

Plugging in the values, we get v = (6.626 x [tex]10^{-34}[/tex] J.s)/(270.8 x [tex]10^{-12}[/tex]m)(9.10939 x [tex]10^{-31}[/tex] kg), which simplifies to v = 6.25 x [tex]10^{6 }[/tex]m/s.

This is an extremely high velocity for an electron, and it illustrates the wave-particle duality of matter and the important role that quantum mechanics plays in understanding the behavior of subatomic particles.

For more such questions on Broglie wavelength, click on:

https://brainly.com/question/30216495

#SPJ11

The velocity of an electron with a de Broglie wavelength of 270.8 pm is 0 m/s, since it is at rest.To calculate the velocity of an electron with a given de Broglie wavelength, we can use the de Broglie equation, which states that the wavelength (λ) of a particle is equal to its Planck's constant (h) divided by its momentum (p). Mathematically, this can be represented as λ = h/p.

To find the velocity (v) of an electron with a de Broglie wavelength of 270.8 pm, we first need to convert the wavelength from picometers (pm) to meters (m), which gives us:

λ = 270.8 pm = 270.8 × 10^-12 m

Next, we can calculate the momentum (p) of the electron using the same equation, but rearranged to solve for momentum:

p = h/λ

Where h is Planck's constant, which is equal to 6.626 × 10^-34 J·s.

p = (6.626 × 10^-34 J·s) / (270.8 × 10^-12 m) = 2.449 × 10^-24 kg·m/s

Now that we have the momentum of the electron, we can use the classical equation for kinetic energy to find its velocity (v):

K.E. = (1/2)mv^2

Where m is the mass of the electron and K.E. is its kinetic energy. Since we know the mass of an electron (9.10939×10^-31 kg), we can rearrange the equation to solve for velocity:

v = √(2K.E./m)

Since the electron is at rest, it has no initial kinetic energy, so we can simplify the equation to:

v = √(0/9.10939×10^-31 kg) = 0 m/s

Therefore, the velocity of an electron with a de Broglie wavelength of 270.8 pm is 0 m/s, since it is at rest.

learn more about Broglie wavelength here: brainly.com/question/17295250

#SPJ11

When the light wavelength is 610 nm and the second-order maximum is at an angle of 36.5°, the diffraction grating has approximately 962 lines per millimeter.

To determine the number of lines per millimeter on the diffraction grating, we need to use the formula for the diffraction of light through a grating. This formula is given by:

d(sin θ) = mλ

where d is the spacing between the lines on the grating, θ is the angle of diffraction, m is the order of the diffraction maximum (in this case, m = 2 for the second-order maximum), and λ is the wavelength of the light. In this problem, we are given that the wavelength of the light is 610 nm and the angle of diffraction for the second-order maximum is 36.5°.

Plugging these values into the formula, we get:

d(sin 36.5°) = 2(610 nm)

Solving for d, we get:

d = (2 x 610 nm) / sin 36.5° d ≈ 1.04 μm

Finally, we can calculate the number of lines per millimeter by taking the reciprocal of d and multiplying by 1000:

lines per mm = 1 / (1.04 μm) x 1000 lines per mm ≈ 962

As the question is incomplete, the complete question is "Light of wavelength 610 nm illuminates a diffraction grating. the second-order maximum is at an angle of 36.5°.  How many lines per millimeter does this grating have? "

You can learn more about wavelength at: brainly.com/question/31143857

#SPJ11

The main answer to your question is that the current drawn from the power supply with an EMF of 100V and a resistor with a value of 1000 ohms is 0.1 amperes (or 100 milliamperes).

To calculate the current drawn from the power supply, we can use Ohm's law, which states that current (I) is equal to voltage (V) divided by resistance (R):

I = V / R

Plugging in the values we have:

I = 100V / 1000 ohms = 0.1 amperes

Therefore, the current drawn from the power supply is 0.1 amperes or 100 milliamperes.
the current drawn from the power supply is 0.1 A.

Here's the step-by-step explanation:

1. You are given a resistor with a value of 1000 ohms and a power supply with an EMF of 100 V.
2. To find the current drawn from the power supply, we can use Ohm's Law, which is stated as V = IR, where V is voltage, I is current, and R is resistance.
3. We are given V (100 V) and R (1000 ohms), so we can rearrange the formula to solve for I: I = V/R.
4. Now, substitute the given values into the formula: I = 100 V / 1000 ohms.
5. Perform the calculation: I = 0.1 A.

Therefore, the current drawn from the power supply is 0.1 A.

For more information on  Ohm's law visit:

https://brainly.com/question/1247379

#SPJ11

The values of vds and W/L are approximately 0.54 V and 3.09, respectively.

To calculate the values of vds and W/L, we need to use the equation for the drain current in the triode region:

ID = (W/L)μCox(VGS-VTH)^2*(1+λVDS) * (VDS - VDSsat)

where ID is the drain current, W/L is the channel width-to-length ratio, μCox is the oxide mobility, VGS is the gate-to-source voltage, VTH is the threshold voltage, λ is the channel length modulation parameter, VDS is the drain-to-source voltage, and VDSsat is the saturation voltage.

Since the device is operating in the triode region, we can assume that VDS is less than VDSsat, so we can set VDSsat to zero.

We are given that the device carries 1 mA with VGS-VTH=0.6 V and 1.6 mA with VGS-VTH=0.8 V. Let's use these values to create two equations:

1 mA = (W/L)μCox(0.6)^2*(1+λVDS) * (VDS - 0)

1.6 mA = (W/L)μCox(0.8)^2*(1+λVDS) * (VDS - 0)

Dividing the second equation by the first, we get:

1.6/1 = (0.8/0.6)^2*(1+λVDS)/(1+λVDS)

Simplifying, we get:

1.6 = (4/3)^2*(1+λVDS)

1.6 = (16/9)*(1+λVDS)

1+λVDS = 0.9

λVDS = -0.1

Now we can use one of the equations to solve for W/L. Let's use the first equation:

1 mA = (W/L)μCox(0.6)^2*(1-0.1)

1 mA = (W/L)μCox(0.6)^2*0.9

W/L = (1 mA)/(μCox*(0.6)^2*0.9)

W/L ≈ 3.09

Finally, we can use the equation for the drain current to solve for VDS. Let's use the first equation again:

1 mA = (3.09)μCox(0.6)^2*(1-0.1) * (VDS - 0)

VDS = (1 mA)/[(3.09)μCox(0.6)^2*0.9]

VDS ≈ 0.54 V

Therefore, the values of vds and W/L are approximately 0.54 V and 3.09, respectively.

To know more about VDS, refer to the link below:

https://brainly.com/question/15108484#

#SPJ11

If the halo of our galaxy is spherically symmetric, then the mass density rho(r) within the halo would depend on the distance r from the center of the halo.

This can be expressed as rho(r) = M(r)/V(r), where M(r) is the total mass enclosed within a radius r and V(r) is the volume enclosed within that radius.

Regarding the cosmological constant, it is a term in Einstein's field equations that represents the energy density of empty space. It is often denoted by the symbol Λ (lambda) and has a density parameter ΩΛ,0 that characterizes its contribution to the total energy density of the universe.

In terms of the dynamics of our galaxy's halo, the cosmological constant would not have a significant effect because its density parameter is only 0.7. This means that the total energy density of the universe is dominated by other components such as dark matter and dark energy.

Therefore, the influence of the cosmological constant on the dynamics of our galaxy's halo would be relatively small. However, it is important to note that the cosmological constant does have a significant effect on the overall evolution of the universe as a whole.

More on halo: https://brainly.com/question/31029974

#SPJ11

Using radians as the unit for angular displacement simplifies calculations involving angles, especially in trigonometric functions.

The radian is defined as the ratio of the arc length to the radius of a circle, and because it is a dimensionless quantity, it allows for easier mathematical manipulations.

When working with radians, trigonometric functions such as sine, cosine, and tangent are expressed as simple ratios of the sides of a right triangle, making calculations simpler and more efficient.

Additionally, many physical laws, such as the laws of motion and the laws of conservation of energy, are formulated in terms of radians, making it easier to apply them to various physical situations.

In contrast, using degrees as the unit for angular displacement requires conversions between degrees and radians, which can be cumbersome and prone to errors.

Therefore, the use of radians as the unit for angular displacement is preferred in most scientific and mathematical applications.

To know more about angular displacement refer here

https://brainly.com/question/26483834#

#SPJ11

The correct answer is D. The reaction system absorbs 22 kJ of energy from the surroundings.

Energy conservation in a chemical reaction is governed by the principle of conservation of energy, which states that energy cannot be created or destroyed, but only transferred or converted from one form to another. In this case, the fact that the bonds of the products store 22 kJ more energy than the bonds of the reactants implies that energy has been transferred from the surroundings to the reaction system. During a chemical reaction, bonds are broken in the reactants and new bonds are formed in the products. Breaking bonds requires energy input, while forming bonds releases energy. In this scenario, the energy stored in the new bonds of the products is greater than the energy stored in the bonds of the reactants. This means that the reaction system absorbs energy from the surroundings to facilitate the bond formation process. option(d)

For such more questions on energy

https://brainly.com/question/1634438

#SPJ11

The air bubble inside the plastic ball appears to be 5.12 cm beneath the surface when viewed from the outside.

To determine how far beneath the surface the bubble appears to be, we need to use the concept of refraction. When light passes from one medium to another, it bends due to a change in the speed of light. In this case, the light passing from the air inside the bubble to the plastic material of the ball will bend as it enters and exits the plastic.
Using Snell's Law, we can calculate the angle of refraction for the light passing from the air to the plastic:
sin(theta2) = (n1/n2) * sin(theta1)
where:
- theta1 is the angle of incidence (which we can assume is 90 degrees since the light is passing perpendicular to the surface)
- theta2 is the angle of refraction
- n1 is the index of refraction of air (approximately 1.00)
- n2 is the index of refraction of the plastic ball (which we will assume is 1.50)
Plugging in these values, we get:
sin(theta2) = (1.00/1.50) * sin(90)
sin(theta2) = 0.67
Taking the inverse sine of both sides, we find that:
theta2 = 42 degrees
This means that the light passing through the plastic will bend at an angle of 42 degrees relative to the normal (perpendicular) to the surface.
To find how far beneath the surface the bubble appears to be, we need to calculate the distance that the light travels through the plastic before it reaches our eye. This distance will be longer than the actual distance from the bubble to the surface, since the light is bending.
Using trigonometry, we can calculate that the actual distance from the bubble to the surface (which we'll call d) is:
d = sqrt((8.80/2)^2 - (3.00)^2)
d = 7.75 cm
To find the apparent distance, we need to calculate the length of the hypotenuse of a right triangle, where one leg is the distance from the bubble to the surface (d), and the other leg is the distance that the light travels through the plastic (which we'll call x). The angle between the two legs is 42 degrees.
Using trigonometry again, we can set up the following equation:
sin(42) = x / sqrt(x^2 + d^2)
Solving for x, we get:
x = d * sin(42) / sqrt(1 - sin^2(42))
x = 5.12 cm

For more question on plastic ball click on

https://brainly.com/question/14445866

#SPJ11

The bubble inside the plastic ball is located 4.4 cm (half of the diameter) from the side of the ball facing away from you. Therefore, when you look at the bubble turned towards you, it appears to be 7.4 cm (4.4 cm + 3.0 cm) beneath the surface of the ball.

To solve this problem, we need to consider the terms: diameter, surface, and beneath

Given:
- Diameter of the plastic ball = 8.80 cm
- Distance of the air bubble from the surface = 3.00 cm

Step 1: Calculate the radius of the plastic ball
Radius = Diameter / 2
Radius = 8.80 cm / 2
Radius = 4.40 cm

Step 2: Apply the formula for the apparent depth of the air bubble
Apparent depth (d') = (Actual depth (d) * Refractive index of air (n₁)) / Refractive index of plastic (n₂)

Since the refractive index of air is approximately 1 and the refractive index of typical plastic is approximately 1.5, we can use these values in our formula:

d' = (3.00 cm * 1) / 1.5

Step 3: Calculate the apparent depth
d' = 3.00 cm / 1.5
d' = 2.00 cm

So, the air bubble appears to be 2.00 cm beneath the surface when you look at the ball with the bubble turned toward you.

Learn more about surface here : brainly.com/question/28267043

#SPJ11

The de Broglie wavelength of the recoiling electron is 0.0633 picometers.

The de Broglie wavelength of a particle with momentum p is given by λ = h/p, where h is Planck's constant. The momentum of the recoiling electron can be found using conservation of momentum:

where m_electron and v_electron are the mass and velocity of the electron, and m_alpha and v_alpha are the mass and velocity of the alpha particle.

Since the alpha particle is much more massive than the electron, we can assume that the velocity of the alpha particle is negligible after the collision, and we can solve for the velocity of the electron:

Now we can calculate the de Broglie wavelength:

To learn more about de Broglie wavelength, here

https://brainly.com/question/17295250

#SPJ4

This is because the gravitational pull of the giant outer planets, particularly Jupiter, can significantly affect their trajectories and send them hurtling back out into the outer solar system.

The reason why comets spend, so little time in the inner solar system is due to their highly elliptical orbits. Their orbits take them from the outer solar system to the inner solar system and back again.

The highly elliptical orbits of comets can also be influenced by the gravitational pull of other planets. For example, Jupiter's gravity can cause comets to be ejected from the solar system or sent on a trajectory that takes them close to the sun. In some cases, the gravitational pull of a planet can even cause a comet's orbit to change, making it spend more or less time in the inner solar system.

Learn More About solar system

https://brainly.com/question/1286910

#SPJ11

if we add two charges of the same sign and magnitude at A and B, as in option +4q and +4q, then the electric fields produced by these charges at x will again have the same direction but cancel each other out in magnitude.

Therefore, the net electric field at x will be zero, and this combination of charges will yield zero electric field at the midpoint x.

The correct option is E.

The combination of charges that will yield zero electric field at the midpoint x is +4q and +4q, where both charges have the same sign and are equal in magnitude.

This can be explained using the principle of superposition. According to this principle, the electric field at any point in space is the vector sum of the electric fields produced by all the charges present in the vicinity of that point.

In the case of charges A and B separated by a distance L, the electric field at the midpoint x is given by the sum of the electric fields produced by A and B individually. Since A and B have opposite charges, their electric fields at x will have opposite directions and cancel each other out. Therefore, the net electric field at x will be zero.

Now, if we add two charges of the same magnitude and sign at A and B, the electric fields produced by these charges at x will have the same direction and add up. Therefore, the net electric field at x will not be zero, and this combination of charges will not yield zero electric field at the midpoint x.

To know more about magnitude refer here :-

https://brainly.com/question/30881682#

#SPJ11

The tension must be applied to the string so that it vibrates at the fundamental frequency of 605 hz is 102 N.

To find the tension required for the string to vibrate at the fundamental frequency, we can use the formula for the fundamental frequency of a vibrating string:

f = (1/2L) * sqrt(T/μ)

Where:
f = fundamental frequency (605 Hz)
L = length of the string (27.5 cm or 0.275 m)
T = tension in the string (unknown)
μ = mass per unit length (5.81 * 10^-4 kg/m)

We will rearrange the formula to solve for T:

T = (2Lf)^2 * μ

Now, plug in the values:

T = (2 * 0.275 m * 605 Hz)^2 * (5.81 * 10^-4 kg/m)
T = (330.5 Hz)^2 * (5.81 * 10^-4 kg/m)
T ≈ 102.07 N

The required tension is approximately 102 N, which is closest to option 102 N.

For more questions on  frequency:

https://brainly.com/question/30466268

#SPJ11

The tension must be applied to the string so that it vibrates at the fundamental frequency of 605 hz is 102 N.

To find the tension required for the string to vibrate at the fundamental frequency, we can use the formula for the fundamental frequency of a vibrating string:

f = (1/2L) * sqrt(T/μ)

Where:
f = fundamental frequency (605 Hz)
L = length of the string (27.5 cm or 0.275 m)
T = tension in the string (unknown)
μ = mass per unit length (5.81 * 10^-4 kg/m)

We will rearrange the formula to solve for T:

T = (2Lf)^2 * μ

Now, plug in the values:

T = (2 * 0.275 m * 605 Hz)^2 * (5.81 * 10^-4 kg/m)
T = (330.5 Hz)^2 * (5.81 * 10^-4 kg/m)
T ≈ 102.07 N

The required tension is approximately 102 N, which is closest to option 102 N.

Visit to know more about Frequency:-
brainly.com/question/30466268

#SPJ11

a) The deBroglie wavelength is h/√(2m_nkT/3). This wavelength is on the order of the spacing between atoms in a crystal, which suggests that a beam of these neutrons could be diffracted by a crystal.

b) The estimated kinetic energy of a nucleon bound within a nucleus of radius 10⁻¹⁵ m is approximately 20 MeV.

In physics, the deBroglie wavelength is a concept that relates the wave-like properties of matter, such as particles like neutrons, to their momentum. Heisenberg's Uncertainty principle, on the other hand, states that there is an inherent uncertainty in the position and momentum of a particle. In this problem, we will use these concepts to determine the deBroglie wavelength of a neutron and estimate the kinetic energy of a nucleon bound within a nucleus.

(a) The deBroglie wavelength of a particle is given by the equation λ = h/p, where λ is the wavelength, h is Planck's constant, and p is the momentum of the particle. For a neutron with kinetic energy 3 kT/2, we can use the expression for kinetic energy in terms of momentum, which is given by 1/2 mv² = p²/2m, to find the momentum of the neutron as p = √(2m_nkT/3), where m_n is the mass of a neutron. Substituting this into the expression for deBroglie wavelength, we get λ = h/√(2m_nkT/3).

Plugging in the values of h, m_n, k, and T, we get λ = 1.23 Å. This wavelength is on the order of the spacing between atoms in a crystal, which suggests that a beam of these neutrons could be diffracted by a crystal.

(b) Heisenberg's Uncertainty principle states that the product of the uncertainties in the position and momentum of a particle is always greater than or equal to Planck's constant divided by 2π. Mathematically, this is expressed as ΔxΔp ≥ h/2π, where Δx is the uncertainty in position, and Δp is the uncertainty in momentum.

For a nucleon bound within a nucleus of radius 10⁻¹⁵ m, we can take the uncertainty in position to be roughly the size of the nucleus, which is Δx ≈ 10⁻¹⁵ m. Using the mass of a nucleon as m = 1.67 x 10⁻²⁷ kg, we can estimate the momentum uncertainty as Δp ≈ h/(2Δx). Substituting these values into the Uncertainty principle, we get:

ΔxΔp = (10⁻¹⁵ m)(h/2Δx) = h/2 ≈ 5.27 x 10⁻³⁵ J s

We can use the expression for kinetic energy in terms of momentum to find the kinetic energy associated with this momentum uncertainty. The kinetic energy is given by K = p²/2m, so we can estimate it as:

K ≈ Δp²/2m = (h^2/4Δx²)/(2m) = h²/(8mΔx²) ≈ 20 MeV

Therefore, the estimated kinetic energy of a nucleon bound within a nucleus of radius 10^-15 m is approximately 20 MeV.

Learn more about wavelength at: https://brainly.com/question/27892029

#SPJ11

If a cylindrical container with a cross-sectional area of 64.2 cm2 holds a fluid of density 776 kg/m3 The depth of the fluid in the cylindrical container is 2.56 meters.

We can use the hydrostatic equation to find the depth of the fluid in the cylindrical container:

ΔP = ρgh

where:

ΔP = difference in pressure (Pa)

ρ = density of fluid (kg/m3)

g = acceleration due to gravity (9.81 m/s2)

h = height or depth of fluid (m)

First, let's convert the cross-sectional area from cm2 to m2:

64.2 cm2 = 0.00642 m2

Next, let's find the difference in pressure:

ΔP = 121 kPa - 101 kPa = 20 kPa = 20,000 Pa

Now, let's plug in the values we have into the hydrostatic equation and solve for h:

ΔP = ρgh

20,000 Pa = (776 kg/m3)(9.81 m/s2)h

h = 2.56 meters

Therefore, the depth of the fluid in the cylindrical container is 2.56 meters.

learn more about hydrostatic here:

https://brainly.com/question/28206120

#SPJ11

If a cylindrical container with a cross-sectional area of 64.2 cm2 holds a fluid of density 776 kg/m3 The depth of the fluid in the cylindrical container is 2.56 meters.

We can use the hydrostatic equation to find the depth of the fluid in the cylindrical container:

ΔP = ρgh

where:

ΔP = difference in pressure (Pa)

ρ = density of fluid (kg/m3)

g = acceleration due to gravity (9.81 m/s2)

h = height or depth of fluid (m)

First, let's convert the cross-sectional area from cm2 to m2:

64.2 cm2 = 0.00642 m2

Next, let's find the difference in pressure:

ΔP = 121 kPa - 101 kPa = 20 kPa = 20,000 Pa

Now, let's plug in the values we have into the hydrostatic equation and solve for h:

ΔP = ρgh

20,000 Pa = (776 kg/m3)(9.81 m/s2)h

h = 2.56 meters

Therefore, the depth of the fluid in the cylindrical container is 2.56 meters.

learn more about hydrostatic here:

brainly.com/question/28206120

#SPJ11

To return the water to its initial temperature, we need to remove the same amount of heat that was added to it:
Q_removed = ΔU = 1715 J

a) The amount of work done on the water can be calculated using the formula: work = force x distance. The force applied by the weight is equal to its weight, which is given as 35kg x 9.8m/s^2 = 343N. The distance traveled by the weight is 5m. Therefore, the work done on the water is:

work = force x distance = 343N x 5m = 1715J

b) The internal-energy change of the water can be calculated using the formula: ΔU = mCΔT, where ΔU is the change in internal energy, m is the mass of water, C is the specific heat capacity of water, and ΔT is the change in temperature.

Since the stirrer is operated by gravity, it is safe to assume that the process is adiabatic (no heat exchange with the surroundings). Therefore, all the work done on the water goes into increasing its internal energy.

The mass of water is given as 25kg and the specific heat capacity of water is 4.18 kJ/kgC. The change in temperature can be calculated using the formula:

ΔT = work / (mC)

Substituting the values, we get:

ΔT = 1715J / (25kg x 4.18 kJ/kgC) = 16.3C

Therefore, the internal-energy change of the water is:

ΔU = mCΔT = 25kg x 4.18 kJ/kgC x 16.3C = 1715J

c) The final temperature of the water can be calculated by adding the change in temperature to the initial temperature. The initial temperature is given as 20C. Therefore, the final temperature is:

final temperature = initial temperature + ΔT = 20C + 16.3C = 36.3C

d) The amount of heat that must be removed from the water to return it to its initial temperature can be calculated using the formula: Q = mCΔT, where Q is the heat transferred, m is the mass of water, C is the specific heat capacity of water, and ΔT is the change in temperature.

Since the water needs to be returned to its initial temperature of 20C, the change in temperature is -16.3C. Therefore, the amount of heat that must be removed from the water is:

Q = mCΔT = 25kg x 4.18 kJ/kgC x (-16.3C) = -1700J

Note that the negative sign indicates that heat must be removed from the water.
a) The amount of work done on the water can be calculated using the formula W = mgh, where m is the mass of the weight, g is the acceleration due to gravity, and h is the height the weight falls.

W = (35 kg)(9.8 m/s²)(5 m) = 1715 J (joules)

b) Since all the work done on the weight is transferred to the water as internal energy, the internal-energy change of the water is equal to the work done:

ΔU = 1715 J

c) To find the final temperature of the water, we can use the formula ΔU = mcΔT, where ΔU is the internal-energy change, m is the mass of the water, c is the specific heat capacity of water (Cp), and ΔT is the change in temperature.

1715 J = (25 kg)(4180 J/kg°C)(ΔT)
ΔT = 1715 J / (25 kg * 4180 J/kg°C) = 0.0164 °C

The initial temperature of the water is 20°C, so the final temperature is:

T_final = 20°C + 0.0164°C = 20.0164°C

To know more about work done visit:-

https://brainly.com/question/13662169

#SPJ11

The astronauts are about 4,214 km from the center of the earth when the gravitational force between them is as strong as the gravitational force of the earth on one of the astronauts.

First, we can use the formula for the gravitational force between two objects:

[tex]F = G * (m1 * m2) / r^2[/tex]

where F is the gravitational force between the two objects, G is the gravitational constant, m1 and m2 are the masses of the two objects, and r is the distance between them.

Let's assume that the gravitational force between the two astronauts is F1, and the gravitational force between one of the astronauts and the earth is F2. We want to find the distance r where F1 = F2.

The gravitational force between the earth and one of the astronauts is:

[tex]F2 = G * (65 kg) * (5.97 x 10^24 kg) / (6.38 x 10^6 m + 1 m)^2 = 638 N[/tex]

To find the gravitational force between the two astronauts, we need to use the fact that the total mass is 130 kg (65 kg + 65 kg), and the distance between them is 1 m. Therefore:

[tex]F1 = G * (65 kg) * (65 kg) / (1 m)^2 = 4.51 x 10^-7 N[/tex]

Now we can set F1 = F2 and solve for r:

G * (65 kg)^2 / r^2 = 638 N

r = sqrt(G * (65 kg)^2 / 638 N) = 4,214 km

Learn more about force here:

https://brainly.com/question/13191643

#SPJ11

An expression for the speed of a particle of rest mass m in terms of its total energy E v = c√[(E²)/(m²c²) - 1].

To derive the expression for the speed of a particle with rest mass m and total energy E, we will use the energy-momentum relation from special relativity. The relation is:
E² = (mc²)² + (pc)²
where E is the total energy, m is the rest mass, c is the speed of light, and p is the momentum of the particle. The momentum can be expressed as p = mv, where v is the speed of the particle. So, the equation becomes:
E² = (mc²)² + (mvc)²
Now, we will solve for v. First, factor out the common term m²c²:
E² = m²c²(1 + v²/c²)
Next, divide both sides by m²c²:
(E²)/(m²c²) = 1 + v²/c²
Subtract 1 from both sides:
(E²)/(m²c²) - 1 = v²/c²
Finally, multiply both sides by c² and take the square root to obtain v:
v = c√[(E²)/(m²c²) - 1]
This expression gives the speed of a particle with rest mass m and total energy E in terms of the speed of light c.

To know more about energy visit:

brainly.com/question/29647468

#SPJ11

The average power output of the laser keychain during the feline play session is 5.07 x 10^-3 W.

The energy of each photon can be calculated using the equation:

E = hc/λ

where h is Planck's constant (6.626 x 10^-34 J*s), c is the speed of light (2.998 x 10^8 m/s), and λ is the wavelength in meters.

Converting the given wavelength to meters:

653 nm = 6.53 x 10^-7 m

Thus, the energy of each photon is:

E = (6.626 x 10^-34 J*s)(2.998 x 10^8 m/s)/(6.53 x 10^-7 m) = 3.044 x 10^-19 J

The number of photons emitted during the play session is given as 5.00 x 10^17 photons.

The total energy emitted during the play session is:

E_total = N_photons x E_photon = (5.00 x 10^17 photons)(3.044 x 10^-19 J/photon) = 1.522 x 10^-1 J

The average power output can be calculated using the equation:

P = E_total / t

where t is the time in seconds.

Substituting the values:

P = (1.522 x 10^-1 J) / (30.0 s) = 5.07 x 10^-3 W

To know more about average power output click here:

https://brainly.com/question/31944446#

#SPJ11

The 232Th sample has a greater number of nuclei than the 235U sample due to its longer half-life.

The number of nuclei in a radioactive sample decreases with time due to decay. The rate of decay is determined by the half-life of the radioactive isotope.

The 232Th sample has a longer half-life than the 235U sample, which means that it decays more slowly and has a greater number of nuclei at any given time.

Therefore, the 232Th sample has a greater number of nuclei than the 235U sample. This is also supported by the fact that the initial activity (measured in Becquerels, Bq) of both samples is the same, indicating that they started with the same number of nuclei.

For more such questions on nuclei, click on:

https://brainly.com/question/29295841

#SPJ11

Comparing the results, you will find that the 232Th sample has a greater number of nuclei than the 235U sample.

Consider two radioactive samples: A 185 MBq sample of 235U, whose half-life is 7.1 x 10^8 years, and a 185 MBq sample of 232Th, whose half-life is 1.4 x 10^10 years. To compare the number of nuclei in each sample, we can use the formula:

Number of Nuclei = (Activity × Half-life) / Decay constant

First, we need to find the decay constant for each sample:

Decay constant = 0.693 / Half-life

For 235U:
Decay constant (235U) = 0.693 / (7.1 x 10^8 years)

For 232Th:
Decay constant (232Th) = 0.693 / (1.4 x 10^10 years)

Now, we can calculate the number of nuclei for each sample:

Nuclei (235U) = (185 MBq × 7.1 x 10^8 years) / Decay constant (235U)
Nuclei (232Th) = (185 MBq × 1.4 x 10^10 years) / Decay constant (232Th)

Comparing the results, you will find that the 232Th sample has a greater number of nuclei than the 235U sample.

Learn more about nuclei here:

brainly.com/question/18730750

#SPJ11

Once you have the resonant frequency, you can plug it into the formula and find the wavelength of the electromagnetic waves emitted by the transmitter.

The formula to calculate the wavelength of electromagnetic waves is:

λ = c / f

Where λ is the wavelength, c is the speed of light (299,792,458 m/s), and f is the frequency of the waves.

To find the frequency of the waves emitted by the transmitter, we can use the resonant frequency formula for an LC circuit:

f = 1 / (2π √(LC))

Where L is the inductance (15 μH) and C is the capacitance (23 pF).

Plugging in the values, we get:

f = 1 / (2π √(15 μH * 23 pF))
f = 1.441 GHz

Now, we can use the frequency to calculate the wavelength:

λ = c / f
λ = 299,792,458 m/s / 1.441 GHz
λ = 0.208 meters or 20.8 cm

Therefore, the wavelength of the electromagnetic waves emitted by the transmitter is 20.8 cm.

To know more about  electromagnetic waves visit:-

https://brainly.com/question/3101711

#SPJ11

The screen should be placed 1886.8 mm (or about 1.9 meters) away from the slits in order for the distance between the m = 0 and m = 1 bright fringes to be 1.0 cm.

To solve this problem, we can use the formula for the distance between bright fringes:
y = (mλD) / d
Where y is the distance from the central bright fringe to the mth bright fringe on the screen, λ is the wavelength of the light, D is the distance from the slits to the screen, d is the distance between the two slits, and m is the order of the bright fringe.
We want to find the distance D, given that the distance between the m = 0 and m = 1 bright fringes is 1.0 cm. We know that for m = 0, y = 0, so we can use the formula for m = 1:
1 cm = (1 x 530 nm x D) / 1 mm
Solving for D, we get:
D = (1 cm x 1 mm) / (1 x 530 nm)
D = 1886.8 mm
Therefore, the screen should be placed 1886.8 mm (or about 1.9 meters) away from the slits in order for the distance between the m = 0 and m = 1 bright fringes to be 1.0 cm.

To know more about wavelength visit:

https://brainly.com/question/31143857

#SPJ11

The relationship between the electric field (E) and magnetic field (B) amplitudes in an electromagnetic wave is given by:

B = E / c

where c is the speed of light in vacuum, approximately equal to 3.00 x 10^8 meters per second.

Given that the electric field amplitude (E) is 365 V/m, we can calculate the corresponding magnetic field amplitude (B) as follows:

B = E / c

B = 365 V/m / (3.00 x 10^8 m/s)

Calculating the numerical value:

B ≈ 1.22 x 10^-6 T (tesla)

Therefore, the amplitude of the corresponding magnetic field is approximately 1.22 x 10^-6 T.

Learn more about **electromagnetic waves** and their properties here:

https://brainly.com/question/30289624?referrer=searchResults

#SPJ11

The function can be used to find the value of a copy machine during the first 5 years of use.

There are a few things missing in the given statement. It seems like there is no question to answer. However, I can explain what the given function represents.

The function v(t) = -3500t/19000 represents the decrease in value of a large copy machine as a function of time, where t is the time in years and v is the value of the machine.

The negative sign indicates that the value of the machine is decreasing over time.

This function can be used to find the value of the machine during the first 5 years of use by substituting t = 5 into the function and evaluating v(5).

Learn more about Depreciation.

brainly.com/question/30531944

#SPJ11

(a) If a guitar string 62 cm long vibrates with a standing wave that has 3 antinodes, there is 3rd harmonic (b) The wavelength of this wave is approximately 41.33 cm.

(a) Since there are 3 antinodes on the 62 cm long guitar string, this corresponds to the 3rd harmonic. This is because each antinode represents a half-wavelength, and in the 3rd harmonic, there are 1.5 wavelengths along the string.

(b) To find the wavelength of this wave, we can use the formula for the length of the string in terms of harmonics:

Length = (n × wavelength) / 2

Where n is the harmonic number (in this case, 3) and the length is 62 cm. Rearranging the formula to solve for the wavelength:

Wavelength = (2 × Length) / n
Wavelength = (2 × 62 cm) / 3
Wavelength = 124 cm / 3
Wavelength ≈ 41.33 cm

You can learn more about wavelength at: brainly.com/question/31143857

#SPJ11

The radius of the hydrogen atom in the n=3 state is option A. 0.48 nm

The radius of a hydrogen atom in any given energy level can be calculated using the formula

[tex]r_n[/tex] = [tex]n^2[/tex] * [tex]a_0[/tex],

where r_n is the radius at the energy level n, n is the principal quantum number, and a_0 is the Bohr radius (0.0529 nm).

In this case, we are looking for the radius at n=3.

Using the formula:

[tex]r_3[/tex] = [tex]3^2[/tex] * 0.0529 nm = 9 * 0.0529 nm = 0.4761 nm

The closest answer to this value is 0.48 nm

It is important to note that as the energy level (n) increases, the radius of the atom also increases. This is because higher energy levels allow for electrons to occupy orbitals further away from the nucleus. This increase in distance results in an increase in the radius of the atom.

In summary, we used the formula for the Bohr radius to calculate the radius of the hydrogen atom in the n=3 state and found that the answer is 0.48 nm (Option A).

Know more about the Hydrogen atom here :

https://brainly.com/question/31850073

#SPJ11