What happens to sunlight photons?
Answer:
All of the infrared photons are absorbed and re-radiated by the glass pane.
Sunlight photons interact with the Earth's atmosphere, scattering, absorbing, and transmitting, influencing weather, photosynthesis, and regulating the planet's temperature.
When sunlight photons reach the Earth's atmosphere, several interactions occur. First, a fraction of photons is absorbed by atmospheric gases, which excite their molecules. Some photons are scattered in various directions due to Rayleigh or Mie scattering, making the sky appear blue and contributing to diffuse light. Next, photons that pass through the atmosphere may interact with clouds, dust, and aerosols, leading to further scattering and absorption.
Eventually, the remaining photons reach the Earth's surface and may be absorbed, reflected, or transmitted. The absorbed photons can warm the Earth, driving weather patterns and supporting photosynthesis in plants. Reflecting and transmitting photons play a crucial role in regulating Earth's temperature and energy balance.
To learn more about photons follow the link:
https://brainly.com/question/14839718
#SPJ2
The complete question is:
What happens to sunlight photons when they reach the Earth's atmosphere?
During meiosis, crossing-over may occur. What is usually the result of crossing-over?
A- the development of identical offspring
B- variation within the species
C- overproduction of gametes
D- fertilization and development
Why is an ecosystem with higher levels of biodiversity more stable than an ecosystem with lower levels of biodiversity?
O because species are more adaptable
O because they are better able to withstand stresses like disease or climate change
because changes affect every species the same way
because species are constantly replacing one another
An ecosystem with higher levels of biodiversity is more stable than another with lower levels because they are better able to withstand stresses like disease or climate change.
What is biodiversity?The term biodiversity refers to all of the variations (both genetic and phenotypic) in a given population.
Biodiversity is a fundamental subject to maintaining the equilibrium (homeostasis) of the whole ecosystem.
Higher biodiversity allows populations to face environmental changes such as diseases or climate change.
Learn more about biodiversity here:
https://brainly.com/question/11542363
Can anyone tell me the answer for these
Based on the chart of temperature and the amount of rainfall, it is observed that rainfall is highest in the tropical rainforest while the highest and lowest temperatures are found in desert and tundra respectively.
What are biomes?Biomes are large area of land whose characteristics are influenced by various abiotic factors such as temperature, amounts of precipitation, pH, light as well as biotic factors such as plants and animals as well as microorganisms.
The major biomes of the world include:
tropical rainforest coniferous forest temperate grassland deserts tundradeciduous forestsFrom the chart, the amount of rainfall is highest in the tropical rainforest while the highest and lowest temperatures are found in desert and tundra respectively.
Learn more about biomes at: https://brainly.com/question/6320793
what is anemia, why do people with sickle cell anemia have anemia?
Answer:
que es la anemia
Insuficiencia de glóbulos rojos saludables debido a la falta de hierro en el cuerpo.
por que las personas con anemia de celulas falciformes tienen anemia
La anemia de células falciformes es causada por una mutación en el gen que le dice a tu cuerpo que produzca el compuesto rico en hierro que hace que la sangre sea roja y permite que los glóbulos rojos transporten el oxígeno de los pulmones a todo el cuerpo
Explanation:
Answer:
sickle cells typically die in 10 to 20 days,l leaving a shortage of red blood cells
Explanation:
the lack of red blood cells can make a animal have anemia
This is digital data obtained from sensors carried in satellites. It includes collecting data in the
visible and non-visible portions of the electromagnetic spectrum.
Example: Landsat image
Term: Type term here
Satellite Imagery is a type of digital data obtained from sensors carried in artificially designed satellites.
What is Satellite Imagery?Satellite Imagery refers to the images that are obtained by using artificial satellites made by humans.
Satellite Imagery includes collecting data on both the visible and non-visible portions of the electromagnetic spectrum.
Satellite Imagery is fundamental for many applications in different disciplines such as, for example, agriculture.
Learn more about Satellite Imagery here:
https://brainly.com/question/775105
what is the dominant phase in hydra ?
A) medusa
B) polyp
polyp should be the answer
How are genetically engineered bacteria used in medicine?
They destroy viruses in the body.
They are used to make memory B cells.
They make products to treat diseases.
They are the only way to make vaccines.
Genetically engineered bacteria are important in medicine as they make products to treat diseases.
What are genetically engineered organisms?Genetically engineered organisms are organisms whose genes have been engineered from the original form to new forms which are beneficial to man.
Genetically engineered organisms are produced by the process of genetic engineering
Genetically engineered bacteria are used in:
food industry medicine agricultureIn medicine, genetically engineered bacteria are used products to treat diseases such as insulin.
Learn more about genetic engineering at: https://brainly.com/question/2780091
how do forensic scientists recover writing from a burned document?
Find a picture or video regarding optical illusions and post a link. Describe what is happening in the eye or brain that creates that illusion!
Optical illusion occurs when our brain and eyes miscommunication with each other.
Why Optical illusions occur?Optical illusions happen when our brain and eyes speak to each other in simple language but the interpretation gets mixed-up. For example, our eyes told the brain that something is moving but that's not what the eyes meant to say to the brain which leads to the creation of illusion.
So we can conclude that Optical illusion occurs when our brain and eyes miscommunication with each other.
Learn more about illusion here: https://brainly.com/question/26350554
PLEASE HELP!!!!
Plant Structure and Function Lab
Title: Plant Structure and Function Lab
Objectives:
After doing this lab, you should be able to:
• Identify the correct plant tissues from the corresponding slides.
• Identify the different structures of a flower.
• Describe the functions of each flower structure.
• Describe the functions of each plant tissue.
• Answer the Analysis and Conclusion questions using multiple sentences.
Materials:
• Flower
• Scissors
• Tape
• Tweezers
• Lab Report
Procedure:
Plant Tissues – Part 1
Review each image in your lab activity slide show. Identify the correct tissue or organ below based on each individual slide. Several of these choices may be use multiple times.
• phloem
• stoma
• xylem
• guard cells
• dermal
• ground
• vascular
Slide 1_____Slide 2_____Slide 3______Slide 4_____Slide 5
a. xylem___a. guard cells_a. vascular__a. vascular___a. vascular
b. phloem__b. stoma____b. dermal___b. ground____b. ground
____________________c. ground___c. dermal_____c. dermal
____________________d. dermal_______________________.
Flower Dissection - Part 2
• Pick a flower from your yard, a public location, or somewhere in your neighborhood.
• Start by removing the sepals of the flower with a tweezer. If you do not have a tweezer, a small pair of scissors will also work. It may be easiest to do this if you hold the flower with your finger from below the pedicel (small stalk just underneath the flower) and begin to remove the sepals with a pair of tweezers.
• Using tweezers, place the sepals on the labelled printable worksheet, and tape them in place.
• Repeat the same procedure for the petals and pistil.
• Remove all but one of the stamens and tape them onto the worksheet.
• On your printable worksheet, you should have sepals, petals, stamens and one pistil.
• Take a picture of your worksheet with the flower pieces placed correctly, and save it on your computer. You will attach and submit this with your assessment questions.
Data: Flower Dissection
Name of Flower Component Piece of Flower from Lab Function
Sepal
Petals
Stamen
Pistil
Analysis and Conclusion - Part 3
Plant Tissues:
1. What are three characteristics that all species belonging to the plant kingdom have in common?
2. How will the numbers of stomata differ in tropical plants and desert plants? How does this help protect the health of a plant?
3. If a plant's xylem and phloem become damaged, what type of damage will result within the plant? Describe the different roles on the xylem and phloem in your answer.
4. Why do we compare the dermal tissue of plants to human skin? Explain your answer.
5. Would a plant be able to survive if the ground tissue was damaged? Explain your answer.
Flowering Reproduction:
1. Describe how flowering plants reproduce.
2. How do flowers help other organisms in our environment?
3. Which parts of a plant are responsible for reproduction? Describe the role that each of them will play.
4. Describe what occurs during the process of seed development.
5. Based on your knowledge of flowers, why do you think most flowers are bright in color?
The plant is made up of root and shoot structures that contain parts that enable the plant to grow and manufacture its food.
The structure and function of plantsThe structure of plants is made up of tissues such as:
phloemstomaxylemguard cellsdermalground andvascular.The three characteristics that all species being to the plant kingdom have in common are:
They are non-motile,They make their food hence are called autographs; andTheir cell walls are made sturdy by a material called celluloseThe tropical plants have more stomata than the desert plants. This helps the desert plants to reduce water loss.
Some defects occur when there is damage to the vascular tissues such as the xylem( plant will not be able to transport water from the soil through roots to leaves) and phloem (nutrients produced during photosynthesis will not be able to reach every part of the plant body).
The dermal tissue of plants and the human skin performs protective roles to the underlying tissue organs.
A plant won't be able to survive because it won't absorb water and nutrients from the soil and transport it upwards to all the parts of the plant.
Flowering reproduction in plants takes place through the following steps:
Pollen is carried by insects or blown by the wind from one flower to another. This process is called pollination. Pollen reaches the new flower and travels to the ovary where it fertilises egg cells (ovules) to make seeds. This is fertilisation.Flowers benefit other organisms in our environment by creating more carbon dioxide-absorbing and oxygen-radiating plants.
The flowers contain male reproductive organs called stamens and female reproductive organs called pistils.
The process of seed development begins with double fertilization and involves the fusion of the egg and sperm nuclei into a zygote.
Most flowers are bright in color because they are like advertisement signs for pollinators.
Learn more about flowering plants here:
https://brainly.com/question/26557284
Going long does carbon dioxide last
Answer:
carbondioxide last in about 300 to a 1000 years in the atmosphere
how can you detect hardness of water collected from different sources
Fossil fuels store energy that is released when they are burned. What is the origin of the energy contained in fossil
fuels?
O the wind
O water
Oores
the Sun
Answer:
ores
Explanation:
Saliva flows out of the salivary glands into your mouth is it diffusion osmosis or neither
how both genetic and environmental factors can affect paint color variation in california rabbits
Answer:
Coat color in rabbits is inherited as a series of multiple alleles.
Explanation:
This means that there can be more than just 2 alleles for a single gene. In the case of coat color in rabbits, there are four alleles, and each one is expressed with a different phenotype.
The genetic factors that can affect paint color variation in California rabbits are based on the several different genes that are inherited from their parents. It includes color base, color density, pattern, an extension of dark pigment, spotting, silvering, etc.
What are the genes that are responsible for color variations?The genes that are responsible for color variations are as follows:
Gene A controls the pattern of the coat.Gene B controls the base of coat color.Gene D controls the density of the coat color.Apart from these direct genes, several other genes are also responsible for causing variations in paint color in Rabit. The effect of environmental factors remains the same for every species regardless of competition, and other limited resources. These environmental factors govern the alteration gradually over a long period of time to stimulate some observable responses in the organisms.
Therefore, the genetic and environmental factors that can affect paint color variation in California rabbits are well described above.
To learn more about Color variations in Rabbits, refer to the link:
https://brainly.com/question/3922582
#SPJ2
Why does DNA need to replicate in our cells
Here is a Answer to your question:
DNA replication is the process by which a double-stranded DNA molecule is copied to produce two identical DNA molecules. Replication is an essential process because, whenever a cell divides, the two new daughter cells must contain the same genetic information, or DNA, as the parent cell.
I am sorry if this was not helpful
Hope this was helpful
DNA also known as Deoxyribonucleic Acid is a double stranded macromolecule. The two strands of DNA are complementary to each other. For replication, the DNA double helix opens at one end, making the two strands free to which new strands begin to form and the process continues in a sequence for the whole length of the DNA.
Hope this helpsResidents of an older building have children with a higher incidence of developmental delays. Which of the following is a possible cause of the developmental issues?
Old lead pipes are still used in the building.
Asbestos was not removed from the building.
The heating system is releasing carbon monoxide.
Pesticides were used in the building's landscaping.
Answer:
A
Explanation:
I took the test :)
Primitive lead pipes still in use in the construction may be the root of the building's developmental issues. So, the correct option is A.
What are Lead pipes?Long lead pipes are recognised as the main source of lead in drinking water, lead service lines are the pipes that transport water from the underground water main to homes.
Remember that lead has been used in water pipes for thousands of years. Ancient civilizations picked lead for piping because it could withstand tiny leaks and was pliable enough to form into efficient water-delivery designs.
The development problems with the building may be caused by the outdated lead pipes that are still being used in the construction.
Thus, the correct option is A.
Learn more about Construction, here:
https://brainly.com/question/30579675
#SPJ3
!20POINTS!
Analyze the graph and identify some factors that may contribute to the rotifer population leveling off in the absence of water fleas. Explain your answer in 1–2 sentences.
Answer:
(Leveling off = it stays the same even though it had a increasing period) When looking at the end of the graph you can see that it came back to what it was, which means the rotifers are not increasing anymore. That's because of the carrying capacity (a species' average population size in a particular habitat), and the carrying capacity in this situation is the flask. Therefore the flask has limited space.
Which material would most likely contribute to the formation of humus?
A.
basalt
B.
granite
C.
grass
D.
salt
Answer:
Encyclopedic entry. Humus is dark, organic material that forms in soil when plant and animal matter decays. When plants drop leaves, twigs, and other material to the ground, it piles up.
Suppose an individual has an incorrect number of chromosomes. Specifically, what must have happen? (Do NOT say non-disjunction….be more specific)
Explanation:
the person could have 22 pairs of chromosomes and one triplet of chromosomes resulting in them having 47 chromosomes altogether. This causes people to have down's syndrome
Which of the following statements about the relationship between science and technology is NOT true? a. Science and technology are the same thing. b. Science is the study of the natural world to understand how it functions, while technology changes the natural world to meet human needs or solves problems. c. The work of scientists often makes new technologies possible. d. The development of new technologies often contributes to science. Please select the best answer from the choices provided A B C D
It would be A. Science and technology are the same thing.
The statement that is NOT true about the relationship between science and technology is A. Science and technology are the same things.
What are science and technology?Science refers to the systematic study of the structure and behavior of the physical and natural world. Science can also refer to the organized body of knowledge on a subject.
Science achieves this systematic study through:
ObservationsExperimentsEvidenceExplanations.The above scientific tools are collectively known as scientific inquiry.
On the other hand, technology is the application of gathered scientific knowledge to solve human problems or meet needs through the manipulation of the human environment.
However, science and technology continuously interact to develop each other.
Thus, it is NOT true that science and technology are the same things.
Learn more about science and technology at https://brainly.com/question/17991207
DNA STRUCTURE
Pls help me fill in the blank
Answer:
Overall Shape: Double Helix
Groups of Molecules Called: nucleotides
4 Nitrogenous Bases: Adenine-Thymine / Guanine-cytosine
Chargaff's rules: A=T, C=G
Backbone: Phosphate and deoxyribose sugar
Bonds: Hydrogen Bonds between base pairs
Which of the following best supports the claim that organisms of different domains share a common ancestor?
(A) Photosynthesis occurs in chloroplasts, and the citric acid cycle occurs in mitochondria.
(B) Glycolysis occurs in both prokaryotic cells and eukaryotic cells.
(C) Introns are present in eukaryotic DNA but not in prokaryotic DNA.
(D) Errors in DNA synthesis provide some of the genetic variation in a population.
Can somebody help please
Explanation:
what role did the south africa women play against the violation of human rights the 1950s to 1960s
How do scientists test theories
Answer:
using data, preferably multiple types of data from multiple sources.
Explanation:
hope this helps
What is the process where one strain of bacteria is changed by another strain? A. Transformation B. Evolution C. Morphism D. Adaptation
Answer:
A. Transformation
Explanation:
In transformation, a bacterium takes up a piece of DNA floating in its environment. In transduction, DNA is accidentally moved from one bacterium to another by a virus. In conjugation, DNA is transferred between bacteria through a tube between cells.
which of the following best explains why top predators can have up to 60 times as much of persistent organic pollutants as their prey and up to 600 times as much of the pollutants as producers ?
This is because persistent organic pollutants accumulate in the body fat of living organisms and increase in concentration as they move up the food chain.
What is Persistent organic pollutants?These are organic compounds that are stable and do not degrade easily. They are usually harmful and accumulate in the body fat of organisms.
They are also known to increase in concentration as they move up the food chain which is why predators have more of them.
Read more about Pollutants here https://brainly.com/question/24704410
Why are invasive species considered a threat to native wildlife?
Answer:
they can consume all the native prey and have few predators.
Explanation:
describe five different breath sounds that may be heard when you check a client's respiration
1. Rales. Small clicking, bubbling, or rattling sounds in the lungs. They are heard when a person breathes in (inhales). They are believed to occur when air opens closed air spaces. Rales can be further described as moist, dry, fine, or coarse.
2. Rhonchi. Sounds that resemble snoring. They occur when air is blocked or air flow becomes rough through the large airways.
3. Stridor. Wheeze-like sound heard when a person breathes. Usually it is due to a blockage of airflow in the windpipe (trachea) or in the back of the throat.
4. Wheezing. High-pitched sounds produced by narrowed airways. Wheezing and other abnormal sounds can sometimes be heard without a stethoscope.
5. crackles (a high-pitched breath sound)