11 points
please help me

The value of the phone after one year is $320.

Suppose that a phone that originally sold for $800 loses 3/5 of its value each year after it is released.

Let us find the value of the phone after one year.

Solution:

Initial value of the phone = $800

Fraction of value lost each year = 3/5

Fraction of value left after each year = 1 - 3/5

= 2/5

Therefore, value of the phone after one year = (2/5) × $800

= $320

Hence, the value of the phone after one year is $320.

To know more about value visit:

https://brainly.com/question/30145972

#SPJ11

To calculate the free variables of a function using the "fv" function, follow these steps:

1. Define the function in terms of its variables and any other functions it calls.

For example, let's say we have the following function:

f(x) = g(y(x)) + z

This function takes in one argument (x), calls a function g with an argument y(x), and adds a constant z.

2. Call the fv function with the function definition as the argument.

The fv function takes in a function definition and returns a set of the free variables in that function. Here's how you would call it for our example function:

fv(f)

This will return a set of the free variables in the function. In this case, the set would be {x, y, g, z}.

3. Interpret the results.

The set of free variables represents the variables that are used in the function but are not defined within the function itself.

In our example, x and z are explicitly used in the function definition, so they are clearly free variables. y and g, on the other hand, are not defined within the function itself, but are called as part of the function's logic. Therefore, they are also considered free variables.

Learn more about free variables: https://brainly.com/question/28248724

#SPJ11

Answer:

Step-by-step explanation:

$30 per wear and $65 total.

In ten years the town will have a population of  29,792

Future Population = Initial Population * (1 + Growth Rate) ^ Number of Years

In this case, the initial population is 3,200, the growth rate is 25% (0.25), and the number of years is 10.

Future Population = 3,200 * (1 + 0.25) ^ 10

Now, calculate the value inside the parentheses:

1 + 0.25 = 1.25

Now, raise this value to the power of 10:

[tex]1.25 ^ 1^0 \\=\\9.31[/tex]

Finally, multiply the initial population by the result:

3,200 * 9.31

= 29,792

Read more on growth rate here: https://brainly.com/question/30611694

#SPJ1

The task is to find the convolution of the marginal distributions of two independent random variables x and y with identical geometric distributions.

To find the convolution of the marginal distributions of x and y, we need to calculate the probability distribution function of the sum of x and y. Since x and y have identical geometric distributions, we know that the probability of x=k and y=m is given by p(x=k, y=m) = (1-p)^k * p * (1-p)^m * p = p^2 * (1-p)^(k+m), where p is the probability of success in each trial of the geometric distribution.

To find the probability distribution function of the sum Z=x+y, we need to compute the probability of each possible value of Z. That is, P(Z=k) = Σ P(X=i, Y=k-i) for all i from 0 to k. Plugging in the probability distribution function of x and y, we get P(Z=k) = Σ p^2 * (1-p)^(i+k-i) = p^2 * (1-p)^k * Σ 1. The summation is over all i from 0 to k, and is equal to k+1. Therefore, we have P(Z=k) = (k+1) * p^2 * (1-p)^k. This is the probability distribution function of the sum of two independent random variables x and y with identical geometric distributions, and is the convolution of the marginal distributions of x and y.

Learn more about geometric distributions here :

https://brainly.com/question/30478452

#SPJ11

a) The profit when 90 units are sold is $25,712.50.

b) The average profit per unit when 90 units are sold is $285.72 per unit.

c) The rate at which profit is changing when exactly 90 units are sold is $-5.00 per unit.

a) To find the profit when 90 units are sold, we substitute x = 90 into the profit function P(x):

P(90) = -1.75(90)^2 + 1025(90) - 6000

P(90) = -1.75(8100) + 92250 - 6000

P(90) = -14175 + 92250 - 6000

P(90) = $25,712.50

b) To calculate the average profit per unit when 90 units are sold, we divide the total profit by the number of units:

Average Profit = P(90) / 90

Average Profit = $25,712.50 / 90

Average Profit = $285.72 per unit

c) The rate at which profit is changing when exactly 90 units are sold can be determined by taking the derivative of the profit function with respect to x and evaluating it at x = 90. This will give us the marginal profit per unit at that production level. Differentiating the profit function P(x) with respect to x, we get:

P'(x) = -3.5x + 1025

Now, substitute x = 90 into the derivative:

P'(90) = -3.5(90) + 1025

P'(90) = -315 + 1025

P'(90) = $-290.00 per unit

Therefore, the marginal profit at the production level of 90 thousand units is $-5.00 per unit.

Visit here to learn more about marginal profit:

brainly.com/question/30236297

#SPJ11

The final expression would be: Φ((x-y - σ ϕ((t1/t)^(1/2))(exp[-(y-x)^2/(2σ^2(1-t1/t))] - exp[-(y+x)^2/(2σ^2(1-t1/t))]))/(σ(1 - ϕ((t1/t)^(1/2))(exp[-(y-x)^2/(2σ^2(1-t1/t))] + exp[-(y+x)^2/(2σ^2(1-t1/t))])))

First, let's start with some definitions. In this problem, we're working with a stochastic process B(t), which we assume to be a standard Brownian motion.

We want to compute the probability that the maximum value of B(s) over some interval [0,t] is less than or equal to a fixed value x, given that B(t1) = y.

In notation, we're looking for P{max B(s) <= x | B(t1) = y}.

To approach this problem, we're going to use the fact that the maximum value of a Brownian motion over an interval is distributed according to a Gumbel distribution.

Specifically, if we let M = max B(s) over [0,t], then the cumulative distribution function (CDF) of M is given by:

F_M(m) = exp[-exp(-(m - μ)/σ)]

where μ = E[M] = 0 and σ = Var[M] = t/3.

So, if we can compute the CDF of M conditioned on B(t1) = y, then we can easily compute the probability we're interested in.

To do this, we'll use a result from Brownian motion theory that says that the joint distribution of a Brownian motion at any finite collection of time points is multivariate normal. Specifically, if we let X = (B(t1), B(t2), ..., B(tn)) and assume that 0 <= t1 < t2 < ... < tn, then the joint distribution of X is:

X ~ N(0, Σ)

where Σ is an n x n matrix with entries σ^2 min(ti,tj).

In our case, we're interested in the joint distribution of B(t1) and M = max B(s) over [0,t]. Let's define Z = (B(t1), M). Using the result above, we can write the joint distribution of Z as:

Z ~ N(0, Σ')

where Σ' is a 2 x 2 matrix with entries:

σ^2 t1     σ^2 min(t1,t)
σ^2 min(t1,t)   σ^2 t/3

Now, we can use the conditional distribution of a multivariate normal to compute the CDF of M conditioned on B(t1) = y. Specifically, we have:

P(M <= m | B(t1) = y) = Φ((m-μ')/σ')

where Φ is the CDF of a standard normal distribution, and:

μ' = E[M | B(t1) = y] = y + σ ϕ((t1/t)^(1/2))(exp[-(y-x)^2/(2σ^2(1-t1/t))] - exp[-(y+x)^2/(2σ^2(1-t1/t))])
σ' = (Var[M | B(t1) = y])^(1/2) = σ(1 - ϕ((t1/t)^(1/2))(exp[-(y-x)^2/(2σ^2(1-t1/t))] + exp[-(y+x)^2/(2σ^2(1-t1/t))]))

where ϕ is the PDF of a standard normal distribution.

So, putting it all together, we have:

P{max B(s) <= x | B(t1) = y} = P(M <= x | B(t1) = y)
= Φ((x-μ')/σ')
= Φ((x-y - σ ϕ((t1/t)^(1/2))(exp[-(y-x)^2/(2σ^2(1-t1/t))] - exp[-(y+x)^2/(2σ^2(1-t1/t))]))/(σ(1 - ϕ((t1/t)^(1/2))(exp[-(y-x)^2/(2σ^2(1-t1/t))] + exp[-(y+x)^2/(2σ^2(1-t1/t))])))

Know more about expression here:

https://brainly.com/question/1859113

#SPJ11

The linear transformation t can be represented as [tex]t(\vec v) = [59x - 57y][/tex]

To write the linear transformation t as a matrix transformation, we can use the given information to determine the matrix representation of t.

Let's denote the linear transformation t as T. We know that t([1 - 2]) = [59] and t([-2 - 1]) = [-57].

We can represent the vectors [1 - 2] and [-2 - 1] as columns and their corresponding transformed vectors as the result.

[1 -2] --> [59]

[-2 -1] --> [-57]

To obtain the matrix representation of T, we arrange the transformed vectors as columns in a matrix:

T = [[59 -57]]

Now, for any vector[tex]\vec v = [x y]\in[/tex] ℝ², we can apply the linear transformation by multiplying the vector [tex]\vec v[/tex] by the matrix T:

t([tex]\vec v[/tex] ) = T *[tex]\vec v[/tex]

In this case, it becomes:

t([tex]\vec v[/tex] ) = [[59 -57]] * [x y]

Therefore, the linear transformation t([tex]\vec v[/tex]) is given by:

t([tex]\vec v[/tex] ) = [59x - 57y]

The coefficients in the matrix representation determine how the transformation affects the vector components.

Learn more about linear transformations  

brainly.com/question/13595405

#SPJ11

The value of R=45 mm and r= 38 mm. We calculate the area of the ring by substituting the values of R and r into the formula A=3.14(R^2-r^2). Upon substituting the values, we find that the area of the ring is equal to 1823.34 mm².

The given values are R=45 mm and r=38mm. To find A using the given formula A=3.14(R^2-r^2), we will substitute the given values of R and r, which yields; vA = 3.14[(45)^2 - (38)^2]A = 3.14[2025 - 1444]A = 3.14 x 581A = 1823.34 mm².

Therefore, the formula A=3.14(R^2-r^2) for R=45 mm and r=38mm is equal to 1823.34 mm².

In order to find the value of A, it is important that we are able to understand the formula and the variables involved. A = area of the region. R = radius of the outer circle. r = radius of the inner circle.

The formula A = 3.14(R^2-r^2) helps in calculating the area of the ring, where R is the radius of the outer circle and r is the radius of the inner circle.

The formula of A is A=3.14(R^2-r^2).

The value of R=45 mm and r=38mm. We calculate the area of the ring by substituting the values of R and r into the formula A=3.14(R^2-r^2). Upon substituting the values, we find that the area of the ring is equal to 1823.34 mm².

To know more about Area visit :

https://brainly.com/question/1631786

#SPJ11

If the product is known to be 13 effective then, the probability that the sample will contain less than 9 defectives is 0.058, or 5.8%.

To solve this problem, we need to use the binomial distribution formula, which calculates the probability of getting a certain number of successes in a fixed number of trials. In this case, the number of trials is the sample size (9 units), and the probability of success (i.e., getting a defective unit) is known to be 13%.

The formula for the probability of getting exactly k successes in n trials with probability p of success is:

P(k) = (n choose k) * p^k * (1-p)^(n-k)

where (n choose k) = n! / (k! * (n-k)!) is the binomial coefficient, which represents the number of ways to choose k items from a set of n items.

To find the probability that the sample will contain less than 9 defectives, we need to sum up the probabilities of getting 0, 1, 2, ..., 8 defectives:

P(0 or less) = P(0) + P(1) + P(2) + ... + P(8)

= (9 choose 0) * 0.13^0 * 0.87^9 + (9 choose 1) * 0.13^1 * 0.87^8 + (9 choose 2) * 0.13^2 * 0.87^7 + ... + (9 choose 8) * 0.13^8 * 0.87^1

= 0.034 + 0.135 + 0.264 + 0.288 + 0.200 + 0.097 + 0.032 + 0.007 + 0.001

= 0.058

Therefore, the probability that the sample will contain less than 9 defectives is 0.058, or 5.8%.

Learn more about probability :

https://brainly.com/question/30034780

#SPJ11

the derivative of the function f(x) = 4x^2 - 2 is f'(x) = 8x.

To find the derivative of the function f(x) = 4x^2 - 2 using difference quotients, we start with the definition of the derivative:

f'(x) = lim(h -> 0) [f(x + h) - f(x)] / h

Substituting f(x) = 4x^2 - 2, we get:

f'(x) = lim(h -> 0) [4(x + h)^2 - 2 - (4x^2 - 2)] / h

Expanding the square and simplifying, we get:

f'(x) = lim(h -> 0) [8xh + 4h^2] / h

Canceling the h term and taking the limit as h -> 0, we get:

f'(x) = lim(h -> 0) 8x + 4h

f'(x) = 8x

what is derivative?

In calculus, the derivative is a measure of how a function changes as its input changes. It is defined as the limit of the ratio of the change in the output of a function to the change in its input, as the latter change approaches zero.

To learn more about derivative visit:

brainly.com/question/30365299

#SPJ11

This Riemann sum is an underestimate of the area of the region enclosed by y = f(x), the x-axis, and the vertical lines x = 3 and x = 7.

To calculate the value of the left endpoint Riemann sum for the function f(x) = x²/12 on the interval [3,7], we need to divide the interval into subintervals and approximate the area under the curve by summing the areas of the rectangles.

The width of each rectangle is determined by the subinterval size, which in this case is (7 - 3)/n, where n is the number of subintervals. Since the problem doesn't specify the number of subintervals, we'll assume n = 1 for simplicity.

With n = 1, we have one rectangle with a width of (7 - 3)/1 = 4. The height of the rectangle is determined by evaluating the function at the left endpoint of the subinterval, which is 3 in this case.

So, the height of the rectangle is f(3) = (3²)/12 = 9/12 = 3/4.

The area of the rectangle is given by the product of its width and height:

Area = width * height = 4 * (3/4) = 3.

Therefore, the value of the left endpoint Riemann sum for f(x) = x²/12 on the interval [3,7] with one subinterval is 3.

This Riemann sum is an underestimate of the area of the region enclosed by y = f(x), the x-axis, and the vertical lines x = 3 and x = 7.

Learn more about areas

brainly.com/question/30307509

#SPJ11

The parent function that has a local maximum at x = π is the cosine function. The cosine function is a periodic function that oscillates between 1 and -1 on the interval [0, 2π].

So,it has a local maximum at x = π/2 and a local minimum at x = 3π/2, as well as additional local maxima and minima at other values of x.To see why the cosine function has a local maximum at x = π, consider the graph of the function:y = cos xThis graph oscillates between 1 and -1, reaching these values at x = 0, x = π/2, x = π, x = 3π/2, and so on. Between these points, the graph is decreasing from 1 to -1 and then increasing back to 1. At x = π, the graph is at a high point, or local maximum, because it is increasing on the left side and decreasing on the right side.

The cosine function is a periodic function that repeats every 2π units. Therefore, it has infinitely many local maxima and minima. These occur at intervals of π radians, with the first maximum occurring at x = π/2 and the first minimum occurring at x = 3π/2.

Learn more about Infinitely here,Explain what it means when a system has infinite solutions. Give at least two equations for this system. Show by any met...

https://brainly.com/question/27927692

#SPJ11

The correct option to calculate the total amount payable to suppliers whose materials meet the specifications is: SUMIF(B2:87, "Yes", C2:C7)

The function SUMIF is one that calculates the sum of the values within a certain range (C2:C7) provided that a certain condition is met (B2:B7 reads as "Yes").

By using the SUMIF function and setting specific ranges and criteria, the formula will add up the values within the C2:C7 range exclusively for suppliers whose materials align with the set specifications (which are marked as "Yes" in corresponding cells within B2:B7).

Learn more about SUMIF function from

https://brainly.com/question/26965606

#SPJ1

The relation R represented by the given matrix is not reflexive and not symmetric, but it is transitive.

The matrix represents a relation where the rows and columns are labeled in the order of w, x, y, and z. By reading the matrix, we can identify the ordered pairs that make up the relation. In this case, the pairs are {(w, x), (x, x), (y, z)}.

To determine if the relation is reflexive, we check if every element in the set has a pair with itself. In this case, the pair (w, w) is missing, so the relation is not reflexive.

To check if the relation is symmetric, we examine if for every pair (a, b) in the set, the pair (b, a) is also present. Here, we see that the pair (x, y) is missing, while (y, x) is present, indicating that the relation is not symmetric.

Finally, to assess transitivity, we need to verify that if (a, b) and (b, c) are present in the set, then (a, c) should also be present. In this case, we don't have any such counterexamples, so the relation is transitive.

In summary, the relation R represented by the given matrix is not reflexive and not symmetric, but it is transitive.

Learn more about reflexive here:

https://brainly.com/question/29119461

#SPJ11

The line integral of the vector field F = <17y, 16z, x> along the curve C given by r(t) = (2+t-1, t^3, t^2) for 0 ≤ t ≤ 1 is evaluated using the formula ∫C F · dr = ∫a^b F(r(t)) · r'(t) dt. The exact answer is 61/2.

We have F(x, y, z) = <17y, 16z, x>, and r(t) = (2+t-1, t^3, t^2), with 0 ≤ t ≤ 1. Thus, r'(t) = <1, 3t^2, 2t>, and F(r(t)) = <17t^3, 16t^2, 2+t-1>. Therefore, we have:

∫C F · dr = ∫0^1 <[tex]17t^3, 16t^2, 2+t-1[/tex]> · <[tex]1, 3t^2, 2t[/tex]> dt

= [tex]\int\limits^1_0 {(17t^3 + 48t^4 + (2+t-1)2t)} \, dt[/tex]

= [tex]\int\limits^1_0 {(17t^3 + 48t^4 + 4t^2 - 2t) dt}[/tex]

= [tex](17/4)t^4 + (12/5)t^5 + (4/3)t^3 - t^2 |_0^1[/tex]

= 61/2

Therefore, the line integral of F along C is 61/2.

Learn more about line integral here:

https://brainly.com/question/29850528

#SPJ11

If the circumference of a circle is 17π cm, the area of the circle is 72.25π square centimeters.

The circumference of a circle is given by the formula C = 2πr, where r is the radius of the circle. In this case, we are given that the circumference is 17π cm, so we can set up the equation:

17π = 2πr

Dividing both sides by 2π, we get:

r = 8.5

So the radius of the circle is 8.5 cm.

The area of a circle is given by the formula A = πr². Plugging in the radius we just found, we get:

A = π(8.5)²

Simplifying, we get:

A = 72.25π

To learn more about circle click on,

https://brainly.com/question/31125473

#SPJ1

f(x) over the interval [-2,3] is 128/15.

Given that f(x) = -8x^2, we can find the average value of f(x) over the interval [-2,3] by using the formula for the average value of a function:

average value = (1/(b-a)) * ∫[a,b] f(x)dx

Here, a = -2, b = 3, and f(x) = -8x^2. So,

average value = (1/(3-(-2))) * ∫[-2,3] (-8x^2)dx

average value = (1/5) * ∫[-2,3] (-8x^2)dx

Now, we need to find the integral of -8x^2:

∫(-8x^2)dx = (-8/3)x^3 + C

Now we can evaluate the definite integral from -2 to 3:

(-8/3)(3^3) - (-8/3)(-2^3) = (-8/3)(27) - (-8/3)(-8)

-64/3 + 64 = -64/3 + 192/3 = 128/3

Now, multiply by the (1/5) factor:

average value = (1/5) * (128/3) = 128/15

So, the average value of f(x) over the interval [-2,3] is 128/15.

Learn more about average here:

https://brainly.com/question/27193544

#SPJ11

The most probable number of heads becomes more and more likely as the number of tosses increases.

Let's denote the probability of observing tails as q (which is 1/2 for a fair coin). Then the probability of observing exactly n heads in 4n tosses is given by the binomial distribution:

p(n) = (4n choose n) * (1/2)^(4n)

where (4n choose n) is the number of ways to choose n heads out of 4n tosses. We can express this in terms of the most probable number of heads, which is 2n:

p(n) = (4n choose n) * (1/2)^(4n) * (2^(2n))/(2^(2n))

= (4n choose 2n) * (1/4)^n * 2^(2n)

where we used the identity (4n choose n) = (4n choose 2n) * (1/4)^n * 2^(2n). This identity follows from the fact that we can choose 2n heads out of 4n tosses by first choosing n heads out of the first 2n tosses, and then choosing the remaining n heads out of the last 2n tosses.

Now we can express the ratio p(n)/p(2n) as:

p(n)/p(2n) = [(4n choose 2n) * (1/4)^n * 2^(2n)] / [(4n choose 4n) * (1/4)^(2n) * 2^(4n)]

= [(4n)! / (2n)!^2 / 2^(2n)] / [(4n)! / (4n)! / 2^(4n)]

= [(2n)! / (n!)^2] / 2^(2n)

= (2n-1)!! / (n!)^2 / 2^n

where (2n-1)!! is the double factorial of 2n-1. Note that (2n-1)!! is the product of all odd integers from 1 to 2n-1, which is always less than or equal to the product of all integers from 1 to n, which is n!. Therefore,

p(n)/p(2n) = (2n-1)!! / (n!)^2 / 2^n <= n! / (n!)^2 / 2^n = 1/(n * 2^n)

As n increases, the denominator n * 2^n grows much faster than the numerator (2n-1)!!, so the ratio p(n)/p(2n) approaches zero. This means that the probability of observing n heads relative to the most probable number of heads becomes vanishingly small as n increases, which is consistent with the intuition that the most probable number of heads becomes more and more likely as the number of tosses increases.

Learn more about heads here

https://brainly.com/question/27162317

#SPJ11

The variances of X and Y are given by:

[tex]σX^2 = ∫∫ (x - μX)^2 fX,Y(x,y) dx dy= ∫(-1,1) ∫(x,1) (x - 0)^2 * 1/2 dy dx[/tex]

= 1/3

The value of [tex]E[e^(X+Y)] is (e - 1) * (e - 1/e) ≈ 5.382.[/tex]

The joint probability density function of X and Y is given as:

fX,Y(x,y) =

[tex]{1/2, -1 ≤ x ≤ y ≤ 1,[/tex]

{0, otherwise

To find the marginal probability density function of X, we integrate the joint probability density function over the range of Y, i.e.,

[tex]fX(x) = ∫ fX,Y(x,y) dy[/tex]

[tex]= ∫(x,1) 1/2 dy[/tex] (since y must be greater than or equal to x for non-zero values)

[tex]= 1/2 * (1 - x) (for -1 ≤ x ≤ 1)[/tex]

Similarly, the marginal probability density function of Y is given as:

[tex]fY(y) = ∫ fX,Y(x,y) dx[/tex]

[tex]= ∫(-1,y) 1/2[/tex] dx (since x must be less than or equal to y for non-zero values)

[tex]= 1/2 * (y + 1) (for -1 ≤ y ≤ 1)[/tex]

Next, we can use the joint probability density function to find the expected value of e^(X+Y) as follows:

[tex]E[e^(X+Y)] = ∫∫ e^(x+y) fX,Y(x,y) dx dy[/tex]

[tex]= ∫∫ e^(x+y) * 1/2 dx dy (since fX,Y(x,y) = 1/2 for -1 ≤ x ≤ y ≤ 1)[/tex]

[tex]= 1/2 * ∫∫ e^x e^y dx dy[/tex]

[tex]= 1/2 * ∫(-1,1) ∫(x,1) e^x e^y dy dx[/tex] (since y must be greater than or equal to x for non-zero values)

[tex]= 1/2 * ∫(-1,1) e^x ∫(x,1) e^y dy dx[/tex]

[tex]= 1/2 * ∫(-1,1) e^x (e - e^x) dx[/tex]

[tex]= 1/2 * (e - 1) * ∫(-1,1) e^x dx[/tex]

[tex]= (e - 1) * (e - 1/e)[/tex]

Therefore, the value of [tex]E[e^(X+Y)] is (e - 1) * (e - 1/e) ≈ 5.382.[/tex]

Finally, we can find the correlation coefficient between X and Y as follows:

[tex]ρ(X,Y) = cov(X,Y) / (σX * σY)[/tex]

where cov(X,Y) is the covariance between X and Y, and σX and σY are the standard deviations of X and Y, respectively.

Since X and Y are uniformly distributed over the given region, their means are given by:

[tex]μX = ∫∫ x fX,Y(x,y) dx dy[/tex]

[tex]= ∫(-1,1) ∫(x,1) x * 1/2 dy dx[/tex]

= 0

[tex]μY = ∫∫ y fX,Y(x,y) dx dy[/tex]

[tex]= ∫(-1,1) ∫(-1,y) y * 1/2 dx dy[/tex]

= 0

Similarly, the variances of joint probability X and Y are given by:

[tex]σX^2 = ∫∫ (x - μX)^2 fX,Y(x,y) dx dy= ∫(-1,1) ∫(x,1) (x - 0)^2 * 1/2 dy dx[/tex]

= 1/3

For such more questions on joint probability

https://brainly.com/question/15109814

#SPJ11

Answer:

Step-by-step explanation:

The marginal PDFs of X and Y and the value of rx,y. The expected value of e^{X+Y} is (e - 1/e^2)/2.

To find the marginal PDFs of X and Y, we need to integrate the joint PDF fX,Y over the other variable. Integrating over Y for the range -1 to x and x to 1 respectively gives:

fX(x) = ∫_{-1}^{1} fX,Y(x,y) dy = ∫_{x}^{1} 1/2 dy = 1/2 - x

fY(y) = ∫_{-1}^{y} fX,Y(x,y) dx = ∫_{-1}^{y} 1/2 dx = y/2 + 1/2

To find rx,y, we need to calculate the expected value of X + Y, given by:

E[e^{X+Y}] = ∫_{-1}^{1} ∫_{-1}^{1} e^{x+y} fX,Y(x,y) dx dy

= ∫_{-1}^{1} ∫_{x}^{1} e^{x+y} (1/2) dy dx

= ∫_{-1}^{1} (e^x /2) [e^y]_{x}^{1} dx

= ∫_{-1}^{1} (e^x /2) (e - e^x) dx

= e/2 - (1/e^2)/2 = (e - 1/e^2)/2

Therefore, rx,y = E[X+Y] = E[e^{X+Y}] / E[e^0] = (e - 1/e^2)/2 / 1 = (e - 1/e^2)/2.

In conclusion, we have found the marginal PDFs of X and Y and the value of rx,y. The expected value of e^{X+Y} is (e - 1/e^2)/2.

Learn more about Variables here: brainly.com/question/2466865

#SPJ11

Answer: false

Step-by-step explanation:

1. FALSE. If X and Y are independent, then P(X=x, Y=y) = P(X=x)*P(Y=y). So, the value is not 0 in general. In fact, it holds value if at least one of P(X=x) and P(Y=y) posses value 0. 2. TRUE. An event and its complement event constitutes the total s

True, for any two random variables x and y, -1 < p < 1.

The value p represents the correlation coefficient between two random variables x and y. The correlation coefficient measures the strength and direction of the linear relationship between the variables. The range of p is between -1 and 1. If p is closer to -1, it implies that there is a strong negative correlation between x and y, meaning that as x increases, y decreases. If p is closer to 1, it implies that there is a strong positive correlation between x and y, meaning that as x increases, y also increases. If p is 0, it implies that there is no correlation between x and y.

Therefore, for any two random variables x and y, -1 < p < 1, as the correlation coefficient p must fall within this range.

To know more about correlation coefficient visit:

https://brainly.com/question/27226153

#SPJ11

Geoffrey Moore was referring to all categories of analytics, including descriptive, predictive, and prescriptive, in his quote about the importance of big data analytics for companies.

Geoffrey Moore's quote refers to the importance of big data analytics in helping companies make informed decisions. In this context, he is referring to all categories of analytics:

Descriptive, Predictive, and Prescriptive analytics.

Descriptive analytics:

It analyzes past data to understand trends and patterns, giving companies insights into what has happened.
Predictive analytics:

It uses data to predict future outcomes based on historical data, enabling companies to forecast trends and make better decisions.
Prescriptive analytics:

It provides recommendations on what actions should be taken to optimize outcomes, helping companies make informed decisions based on the analysis of both past and predicted future data.

For similar question on analytics.

https://brainly.com/question/13570243

#SPJ11

Geoffrey Moore's statement refers specifically to descriptive analytics. Descriptive analytics involves the analysis of past data to understand what has happened in a given situation.

This type of analytics allows companies to make sense of the vast amount of data they collect and generate insights to inform decision-making.

In other words, descriptive analytics provides a picture of the current state of affairs, without necessarily predicting future outcomes or prescribing specific actions to take.

Moore's analogy of wandering deer on a freeway suggests that without descriptive analytics, companies lack a clear understanding of the environment they are operating in, and are therefore at risk of making ill-informed decisions that could lead to disastrous consequences.

In today's data-driven economy, companies that fail to harness the power of descriptive analytics are likely to fall behind their competitors who do, as they will not have the insights they need to make informed decisions and take advantage of market opportunities.

Therefore, descriptive analytics is a crucial first step for any company looking to gain a competitive edge and thrive in the modern business landscape.

To learn more about descriptive analytics, click here: https://brainly.com/question/31173411

#SPJ11

The rural activism in the United States has played an essential role in shaping the country's history. This movement emerged as a response to the problems that rural communities faced.

The activists' primary aim was to achieve social, economic, and political equality, which had been denied to the rural population for decades.

One of the most significant achievements of rural activism was the establishment of the Rural Electrification Administration (REA). Before the REA, the majority of rural communities in the United States lacked electricity, which was essential for their economic development. With the establishment of the REA, rural communities could access affordable electricity, which boosted their agricultural and industrial production.

Another critical achievement of rural activism was the establishment of the National Grange. The National Grange was a movement that was formed in 1867 and aimed to help farmers to organize themselves into cooperatives. This helped farmers to access markets and increased their bargaining power.

The rural activism in the United States has been a force for change. The activists' efforts have helped to shape the country's history, and their contributions have been significant. However, there is still a lot to be done, and rural activism is still necessary today to help rural communities overcome the challenges that they face.

Learn more about Acitivism here,What is judicial activism essay?

https://brainly.com/question/29629829

#SPJ11

To prove that if R is a well-order on A, then R is a total order which has the least upper bound, and the greatest lower bound properties, we need to show the following:

R is a total order: For R to be a total order, it must satisfy three conditions: reflexivity, antisymmetry, and transitivity. Since R is a well-order on A, it already satisfies these conditions.

R has the least upper bound property: To prove that R has the least upper bound property, we need to show that for any non-empty subset S of A, there exists a least upper bound (supremum) of S in R.

Suppose S is a non-empty subset of A. Since R is a well-order on A, every non-empty subset of A has the least element.

Let x be the least element of S. Then, for any element y in S, we have x <= y.

Therefore, x is an upper bound of S. Moreover, x is the least upper bound of S in R, because if there were another upper bound z in R, we would have

x <= z and z <= x (by reflexivity and transitivity), which implies x = z.

R has the greatest lower bound property: To prove that R has the greatest lower bound property, we need to show that for any non-empty subset S of A, there exists a greatest lower bound (infimum) of S in R.

Suppose S is a non-empty subset of A. Since R is a well-order on A, every non-empty subset of A has the least element.

Let x be the greatest element of the set A\ S (complement of S in A). Then, for any element y in S, we have y <= x.

Therefore, x is a lower bound of S. Moreover, x is the greatest lower bound of S in R, because if there were another lower bound z in R, we would have z <= x and x <= z (by reflexivity and transitivity), which implies x = z.

Therefore, R is a total order which has the least upper bound, and the greatest lower bound properties if R is a well-order on A.

For more such answers on an upper bound

https://brainly.com/question/28725724

#SPJ11

If R is a well order on A, then it means that every non-empty subset of A has a least element under R. This implies that R is a total order, as for any two elements a, b in A, either aRb or bRa holds, and either a ≤ b or b ≤ a holds.

Now, for any non-empty subset S of A that has an upper bound, let B be the set of all upper bounds of S under R. Since B is a non-empty subset of A, it has a least element, which we call the least upper bound of S under R. This shows that R has the least upper bound property.

Similarly, for any non-empty subset S of A that has a lower bound, let B be the set of all lower bounds of S under R. Since B is a non-empty subset of A, it has a greatest element, which we call the greatest lower bound of S under R. This shows that R has the greatest lower bound property.

Therefore, we have shown that if R is a well order on A, then R is a total order which has the least upper bound, and the greatest lower bound properties.

To learn more about subset click here, brainly.com/question/24138395

#SPJ11

Peter's pay would increase by 16.3%.

A) How much money does Peter make in a typical week?Peter works 40 hours per week, the minimum wage for tipped and non-tipped employees in his region is $7.25 per hour. In addition, he serves 90 tables in a typical week. Every table’s bill is typical of $21, and the average tip percentage is 15%.Step 1: Calculation of Tipped Wages:Tipped wages are also called base wages, and they are paid at the minimum wage rate of $7.25 per hour in Peter’s area.Base Wages= 40 hours/week x $7.25/hour = $290Step 2: Calculation of Tips received by Peter:Each table has a $21 typical bill with an average tip percentage of 15%.Tips per table = $21 x 15% = $3.15Total Tips received = 90 tables/week x $3.15/table = $283.50/weekStep 3: Calculation of Total Earnings:Earnings = Tipped wages + Tips receivedEarnings = $290/week + $283.50/week= $573.50Therefore, Peter makes $573.50 in a typical week.B) Suppose people at the restaurant start tipping 5% more than they used to.

How much would Peter make now?If people at the restaurant start tipping 5% more than they used to, Peter's tip percentage will increase to 20%.Step 1: Calculation of tips after the increase:Tips per table = $21 x 20% = $4.20Total Tips received = 90 tables/week x $4.20/table = $378/weekStep 2: Calculation of Total Earnings:Earnings = Tipped wages + Tips receivedEarnings = $290/week + $378/week= $668/weekTherefore, Peter would make $668 per week if people at the restaurant start tipping 5% more than they used to.C) By what percent would Peter’s pay increase?

Peter's earnings before people start tipping 5% more are $573.50/week.Peter's earnings after people start tipping 5% more are $668/week.Percent Increase= [(New Value - Old Value) / Old Value] x 100Percent Increase= [(668 - 573.5) / 573.5] x 100Percent Increase= 16.3%Therefore, Peter's pay would increase by 16.3%.

Learn more about Earning here,What is the best definition of income ?

https://brainly.com/question/30157678?

#SPJ11

Answer: $550/necklace

Step-by-step explanation:

2 oz per necklace

2 x 275 =550

Answer:

Step-by-step explanation:

When a rectangle is rotated 90° counterclockwise about the origin, the coordinates change as follows:

Point P (x, y) becomes P' (-y, x)

Point Q (x, y) becomes Q' (-y, x)

Point R (x, y) becomes R' (-y, x)

Point S (x, y) becomes S' (-y, x)

Since we are looking for the coordinates of point R', we substitute the original coordinates of point R into the formula:

R' = (-y, x) = (-(6), 7) = (-6, 7)

Therefore, the coordinates of point R' are (-6, 7).

The correct answer is "(−6,7)" or "( - 6 , 7 )".

Part B:

When a rectangle is reflected across the y-axis, the x-coordinate changes its sign, and the y-coordinate remains the same.

After reflecting across the y-axis, the coordinates become:

Point P'' (x, y) becomes P'' (-x, y)

Point Q'' (x, y) becomes Q'' (-x, y)

Point R'' (x, y) becomes R'' (-x, y)

Point S'' (x, y) becomes S'' (-x, y)

Since we are looking for the coordinates of point Q'', we substitute the original coordinates of point Q into the formula:

Q'' = (-x, y) = (-(6), 0) = (-6, 0)

After reflecting across the y-axis, the rectangle is translated down 2 units. Since the y-coordinate of Q'' is 0, the translation down 2 units does not affect it.

Therefore, the coordinates of point Q'' are (-6, 0).

The correct answer is "(−6,0)" or "( - 6 , 0 )".

The earnings from the car washes will be divided between the two classes, with a portion allocated to cover the cost of using the two locations. The distribution of earnings will be proportional to the car wash activities.

The two classes have come up with a fundraising idea of organizing car washes to generate funds for their class trips. This initiative allows them to actively participate in raising money while providing a valuable service to their community. The earnings from the car washes will be divided between the two classes, ensuring a fair distribution of funds.

To cover the costs associated with using the two locations for the car washes, a portion of the earnings will be set aside. This is necessary to account for expenses such as water, cleaning supplies, and any fees associated with utilizing the locations. The specific proportion allocated for covering these costs may vary depending on the agreement reached by the classes or the arrangement made with the location owners.  

Overall, this fundraising activity not only allows the classes to raise money for their respective trips but also fosters teamwork and a sense of responsibility among the students. By organizing and participating in the car washes, the students learn important skills such as coordination, planning, and financial management, all while contributing to their class goals.    

Learn more about distribution here:

https://brainly.com/question/29664127

#SPJ11

The surface integral evaluates to 81π.

To evaluate the given surface integral, we can use the parametrization of the surface S in cylindrical coordinates as follows:

r(θ, z) = (3cosθ, 3sinθ, z) where θ ∈ [0, 2π], z ∈ [0, 3]

Now we need to find the unit normal vector n to the surface S, which is given by the cross product of the partial derivatives of r with respect to θ and z:

n = ∂r/∂θ × ∂r/∂z = (-3cosθ, -3sinθ, 0)

The magnitude of n is |n| = 3, so we have a unit normal vector N = n/|n| = (-cosθ, -sinθ, 0).

Next, we can compute the differential element of surface area dS as:

dS = |∂r/∂θ × ∂r/∂z| dθ dz = 3 dθ dz

Now we can write the surface integral as a double integral over the region R in the (θ, z) plane:

∫∫S (x2 + y2 + z2) dS = ∫∫R (r(θ, z)·r(θ, z)) N·dS

= ∫∫R (9cos2θ + 9sin2θ + z2) 3(-cosθ, -sinθ, 0)·(0, 0, 3) dθ dz

= 27∫∫R (cos2θ + sin2θ) dθ dz + 9∫∫R z2 dθ dz

Note that the integral of cos2θ and sin2θ over [0, 2π] is equal to π, so we have:

∫0^(2π) (cos2θ + sin2θ) dθ = 2π

Also, the region R is a disk of radius 3 in the (θ, z) plane, so we can write:

∫∫R z2 dθ dz = ∫0^(2π) ∫0^3 z2 r dr dθ = (π/2) (3^4)

Putting it all together, we get:

∫∫S (x2 + y2 + z2) dS = 27(2π) + 9(π/2) (3^4) = 243π

To know more about integral,

https://brainly.com/question/29754607

#SPJ11

The distance between the two points plotted is 10 units .

Given,

Point 1 = negative 6, 4 = (-6 , 4) =( [tex]x_{1}, y_{1}[/tex] )

Point 2 = negative 6, negative 6 = (-6 , -6) = ( [tex]x_{2} ,y_{2}[/tex] )

Now,

According to the distance formula,

Distance =   [tex]\sqrt{(x_{2}-x_{1})^2 + (y_{2}-y_{1})^2 }[/tex]

Substitute the values in the distance formula,

Distance = [tex]\sqrt{(-6 - (-6))^2 +(-6 - (4))^2}[/tex]

Distance = 10 units

Hence, distance between two points is 10 units.

Learn more about distance formula,

https://brainly.com/question/25841655

#SPJ1