2. A sample of oxygen gas is placed in a rigid 1.5L glass container at STP. If the gas is
heated to 100 degrees (Celcius) what is the new pressure in mmHg?

Answers

Answer 1

The new pressure : P₂ = 1038.39 mmHg

Further explanation

Given

1.5 L container at STP

Heated to 100 °C

Required

The new pressure

Solution

Conditions at T 0 ° C and P 1 atm are stated by STP (Standard Temperature and Pressure).

So P₁ =  1 atm = 760 mmHg

T₁ = 273 K

T₂ = 100 °C+273 = 373 K

Gay Lussac's Law  

When the volume is not changed, the gas pressure is proportional to its absolute temperature  

[tex]\tt \dfrac{P_1}{T_1}=\dfrac{P_2}{T_2}[/tex]

Input the value :

P₂=(P₁.T₂)/T₁

P₂=(760 x 373)/273

P₂ = 1038.39 mmHg


Related Questions

How does the rate of temperature change depend on the temperature difference of the two beakers?

Answers

Answer:

give it your all but know your limits

Explanation:

Which electromagnetic wave has the shortest
wavelength? Describe the energy level and
frequency of this wave.

Answers

Answer:

The electromagnetic spectrum

Explanation:

ranges from gamma (γ) radiation, which has the shortest wavelength, highest frequency, and greatest energy

PbSO4 -> PbSO3 + O2 type of reaction

Answers

Answer:

Decomposition

Explanation:

This shows a compound splitting into two

By definition, PbSO₄ → PbSO₃ + O₂ is a decomposition reaction, because a single substance decomposes producing two different substances.

First, you have to know that in a decomposition reaction, a single substance decomposes, producing two or more different substances. That is, in this type of reaction, two or more substances are formed from a compound.

The atoms that make up a compound are separated to give the products according to the formula:

AB → A + B

This type of reaction can occur spontaneously or caused by certain external factors, such as heat, which promote the decomposition of the molecule into simpler substances.

In this case, it is possible to observe that PbSO₄ → PbSO₃ + O₂ is a decomposition reaction, because a single substance decomposes producing two different substances.

Learn more:

https://brainly.com/question/8009068?referrer=searchResultshttps://brainly.com/question/24905694?referrer=searchResultshttps://brainly.com/question/13134296?referrer=searchResults

NaHCO3 + HC2H3O2 → NaC2H3O2 + H2O + CO2

What are the reactants and products also add why

MARKING BRAINLIEST

Answers

Reactants are NaHCO3 and HC2H3O2 because they are on the left side of the arrow, aka they’re what’s going in to make the products. NaC2H3O2, H2O and CO2 are the products bc they’re on the right side of the arrow, aka they are the results of the reactants combining

Choose the products that complete the reaction. The chemical equation may not be balanced.

NaHCO3 + HC2H3O2

Answer: NaC2H3O2 + CO2 + H2O

Please can you help me from 1 to 6

Answers

Answer:

um

Explanation:

help you? you mean do it for you? nah man you can just use the calculator ;)

can someone answer a and b to the file attached?

Answers

Explanation:

The equation of the reaction is given as;

12C + 16 H2 --> 4 C3H8

a. Simplify the equation;

The coefficients are 12, 16 and 4.

4 is a common factor, so divide all through by 4.

12/4 = 3, 16/4 = 4, 4/4 = 1

The equation is given as;

3 C + 4 H2 -->  C3H8

b. If 21 moles of  C3H8 are formed, how many moles of C was needed.

From the reaction;

3 mol C atoms reacts to form 1 mol of  C3H8

x mol would react to form 21 moles of  C3H8

3 = 1

x = 21

x = 21  * 3

x = 63 moles

5. If all the particles in a material are made up of
several smaller particles, and every larger particle
is identical, is the material a pure substance or
not? Explain your reasoning.
Plz answer correctly.. I need it ASAP

Answers

If all the particles in a material are made up of

several smaller particles, and every larger particle

is identical, is the material a pure substance or

not? Explain your reasoning.

A pure substance is something like a compound and element. This material made of several particles which seem to be two different particles, I believe, is a mixture. So, it is not a pure substance mixtures are made up of more than one particle while compounds (In a fixed ratio, the fusion of two or more than two atoms) and elements are made up of one molecule essentially.

The given material is not a pure substance as it is made up of several smaller particles and some larger particles that are identical.

What is pure substance?

A pure substance is defined as a substance that has fixed chemical composition throughout the substance. A pure substance are not necessarily have to be of single substance or compound.

The given material is not a pure substance because it is made up of several different small particles. The material is made up of both small particle and large particles and both the particle do not have similar composition.

A pure substance is a homogeneous mixture. These substance has similar composition throughout the substance size of the particle  does not matter.

Thus, it is not a pure substance as it is made up of several smaller particles and some larger particles that are identical.

To learn more about pure substance, refer to the link below:

https://brainly.com/question/24462192

#SPJ2

please help
find the percent composition of Li2O , round to the tenths place

Answers

the percent composition is 100

The maximum and minimum oxidation state that can be shown by iodine respectively is
A. +3, -1
B. +7, -1
C. +5, 0
D. +1, 0

Answers

Answer:

B -1 and +7

Explanation:

Iodine shows oxidation states of −1, +1, +3, +5, or +7.

1. The calendar below shows a sample month of the year. Suppose that you see a full moon on the first day of this month.
Draw and label a picture of the full moon on this day.
Draw and label a picture of the third quarter moon on the day you would expect to see it.
Draw and label a picture of the new moon on the day you would expect to see it.
Draw and label a picture of the first quarter moon on the day you would expect to see it.

Answers

Answer:The 1st Quarter Moon is a primary Moon phase when we can see exactly half of the Moon's surface lit up. ... The First Quarter Moon rises around midday and is visible in the day sky. ... when the Moon has reached the first quarter of its orbit around Earth, hence the name. ... Full Moon Names · Taking pictures of the Moon.

Explanation:

A student calculated the number of moles of carbon dioxide to be 0.30 moles in a 200.0 g sample of a gaseous mixture. What is the percent composition of carbon dioxide? (molar mass = 44.01 g/mol)
A. 0.066%
B. 13%
C. 30%
D. 6.6%

Answers

Considering the definition of percentage by mass, the correct answer is option D. the percent composition of carbon dioxide is 6.6%

Percentage by mass

The percentage by mass expresses the concentration and indicates the amount of mass of solute present in 100 grams of solution.

In other words, the percentage by mass of a component of the solution is defined as the ratio of the mass of the solute to the mass of the solution, expressed as a percentage.

The percentage by mass is calculated as the mass of the solute divided by the mass of the solution, the result of which is multiplied by 100 to give a percentage. This is:

[tex]percentage by mass=\frac{mass of solute}{mass of solution} x100[/tex]

Percent composition of carbon dioxide

In this case, you know:

mass of solute= 0.30 moles × [tex]\frac{44.01 grams}{1 mole}[/tex]= 13.203 grams (being 44.01 [tex]\frac{grams}{mole}[/tex] the molar mass of carbon dioxide)mass of solution= 200 grams

Replacing in the definition of percentage by mass:

[tex]percentage by mass=\frac{13.203 grams}{200 grams} x100[/tex]

Solving:

percentage by mass= 6.60 %

Finally, the correct answer is option D. the percent composition of carbon dioxide is 6.6%

Learn more about percentage by mass:

brainly.com/question/18646836?referrer=searchResults

Pls help!!
1000 L of nitrogen and 2400 L of hydrogen are mixed to produce ammonia. The volume of ammonia produced is

A. 1200 L

B. 1000 L

C. 2400 L

D. 1600 L

Answers

Answer: D. 1600 L

Explanation:

According to avogadro's law, 1 mole of every substance occupies 22.4 L at STP and contains avogadro's number [tex]6.023\times 10^{23}[/tex] of particles.

To calculate the moles, we use the equation:

[tex]\text{Number of moles}=\frac{\text{Given volume}}{\text {Molar volume}}[/tex]

[tex]\text{Number of moles of nitrogen}==\frac{1000L}{22.4L}=44.6moles[/tex]

[tex]\text{Number of moles of hydrogen}==\frac{2400L}{22.4L}=107.1moles[/tex]

[tex]N_2(g)+3H_2(g)\rightarrow 2NH_3(g)[/tex]  

According to stoichiometry :

3 moles of [tex]H_2[/tex] require 1 mole of [tex]N_2[/tex]

Thus 107.1 moles of [tex]H_2[/tex] will require=[tex]\frac{1}{3}\times 107.1=35.7moles[/tex] of [tex]N_2[/tex]

Thus [tex]H_2[/tex] is the limiting reagent as it limits the formation of product and [tex]N_2[/tex] is the excess reagent.

As 3 moles of [tex]H_2[/tex] give = 2 moles of [tex]NH_3[/tex]

Thus 107.1 moles of [tex]H_2[/tex] give =[tex]\frac{2}{3}\times 107.1=71.4moles[/tex]  of [tex]NH_3[/tex]

Volume of [tex]NH_3=moles\times {\text {Molar volume}}=71.4moles\times 22.4L/mol=1600L[/tex]

Thus volume of ammonia produced is 1600 L

When sodium peroxide is added to water, sodium hydroxide and oxygen gas is produced.

Answers

Answer:

The reaction combines the sodium with the hydrogen and oxygen in water to form sodium hydroxide and hydrogen gas, and you get a lot of energy released as heat as well. This heat actually melts any remaining sodium that has not reacted yet, and ignites the hydrogen gas, so you get the bang and the flash.

Explanation:

I have multiple stochiometry questions; could someone please help me out and give an explination? I'd greatly appreciate it, and I'll give brainliest to whoever helps me out! ^^

Answers

Answer 1- 233.07

Answer 2- 491.07

Answer 3 - 6.05

Answer 4 - 28.02

a sample of nitrogen gas occupies 1.55l at 27.0c and 1.00 atm what will the volume be at -100.0c and the same pressure

Answers

V₂=0.894 L

Further explanation

Given

V₁=1.55 L

T₁=27 + 273 = 300 K

P₁=1 atm

T₂=-100+273 = 173 K

Required

The final volume(V₂)

Solution

Charles's Law  

When the gas pressure is kept constant, the gas volume is proportional to the temperature  

[tex]\tt \dfrac{V_1}{T_1}=\dfrac{V_2}{T_2}[/tex]

Input the value :

V₂=V₁T₂/T₁

V₂=1.55 x 173/300

V₂=0.894 L

Anna notices that different types of clothing stick together when they are dried in an electric dryer. When the clothes are pulled apart, they make sparks and a crackling sound due to electric forces of attraction. How can Anna reduce the amount the clothing clings together in the dryer?

Add a substance to the wash that reduces the number of charges transferred.
Increase the temperature of the air in the dryer to weaken the electric forces.
Dry more clothes at the same time so that there is less room for electric forces.
Change the charges on the clothes by running the dryer at a faster speed.

Answers

Answer:

A: Add a substance to the wash that reduces the number of charges transferred.

Explanation:

The attraction between opposite charges make the clothes attract together. To reduce them Increase the temperature of the air in the dryer to weaken the electric forces. Hence, option A is correct.

What is electric dryer?

An electric dryer is used to dry the clothes and hair or other substances using electric current. A substance can have both negative and positive charges. The opposite charges will attract together while the negative charges repel.

By exposing clothes to electric dryer it will gain electrons from the dryer and the positive poles of the clothes will attracts it. The electric current from the dryer will make clothes temporarily polarised.

If temperature increases, the intermolecular force of attraction decreases by making the kinetic energy of molecules raised. Therefore by increasing the temperature of air from the dryer the attraction can be reduced.

To find more on electric charges, refer here:

https://brainly.com/question/9194793

#SPJ6

Which action could cause a sample of liquid to boil?
A. Decreasing the temperature of the liquid
B. Decreasing the sample size of the liquid
C. Decreasing the pressure on the liquid
D. Decreasing the volume of the liquid
Hurry please

Answers

Answer:

B

Explanation:

Decreasing the sample size of the liquid

hope it helps!


How can we use the study of genetics to help determine traits in organisms? Your answer must be in three complete sentences

Answers

Answer:

Genetics is the scientific study of inherited variation. Human genetics, then, is the scientific study of inherited human variation.

Why study human genetics? One reason is simply an interest in better understanding ourselves. As a branch of genetics, human genetics concerns itself with what most of us consider to be the most interesting species on earth

What is the answer helpnme plz

Answers

MgH2 + 2 H2O → Mg(OH)2 + 2 H2

Sulfuryl chloride decomposes at high temperatures to produce sulfur dioxide and chlorine gases:
SO2Cl2(g) = SO2(g) + Cl2(g)

At 375°C the equilibrium constant Kc is 0.045. If there are 2.0 grams of sulfuryl chloride, 0.17 gram of sulfur dioxide, and 0.19 gram of chlorine present in a 1.0 Liter flask.

a. What is the value of the reaction quotient?
b. Is the system at equilibrium?
c. In which direction will the system move to reach equilibrium?​

Answers

Answer:

[SO2Cl2] = = 0.015 M [SO2] = = 0.0027 M [Cl2] = = 0.0027 M Q = =   = 4.8 × 10−4

No. Q < Kc, so reaction will shift to the right.

Explanation:

What is the chemical formula for the compound ammonium phosphate? Use the list of polyatomic ions and the periodic table to help you answer.

A.
NH4H2PO4
B.
(NH4)2PO4
C.
(NH4)3PO4
D.
(NH4)4PO4

Answers

Answer:

c. (NH4)3PO4

Explanation:

Answer:

c is the right answer

Explanation:

as we know ammonium is NH4

AND PHOSPHATE IS PO4-3

SO WHEN WE MIX THEM THEY BECOME

(NH4)3PO4

how many grams of Ca(OH)2 are needed to produce 500ml of 1.66 M Ca(OH)2 solution

Answers

First, determine how many moles are present in solution. Once you have this, you can convert to grams to find the number of grams in your final solution.

To determine how many moles are in your solution, simply multiply Molarity by Volume. Molarity is expressed in units of moles/liter, so your liters will cancel out leaving you with moles. Just ensure that your units of volume are all expressed in liters before attempting the calculation:

1.66 mol/L x 0.5 L = 0.83 mol

To determine how many grams are present in a mole, you will need the molar mass of Ca(OH)2. Using a periodic table, we can determine the molar mass by adding together 1 Ca, 2 O, and 2 H. This turns out to be approximately (40+32+2) = 74 g/mol. Again, paying attention to units we can see that by multiplying moles by molar mass, we will cancel out moles and leave us with grams.

0.83 mol x 74 g/mol = 61.42 grams of Ca(OH)2

Answer: 61.42 grams of Ca(OH)2 are needed to produce 500 mL of a 1.66 M solution.

Electron dot diagram for four elements are shown. Which element would be found in Group 13?

Answers

Answer:

D. 1

Explanation:

Just took it :)

The element that would be found in Group 13 is

D. 1

The electron dot structure has three valence electrons.

Group-13 elements:

Group-13 is also known as the Boron family. This group belongs to p-block elements. The elements of this group will have three electrons in their outermost shell i.e. 3 valence electrons.

Example: Boron has atomic number 5.

Electronic configuration of Boron: [tex]1s^2 2s^2 2p^1[/tex]

Thus, the electron dot structure for group-13 is option D i.e. 1.

Find more information about Group-13 elements here:

brainly.com/question/2514081

What is the mass in grams of a 10.2cm3 block of copper

Answers

Answer:

91.4

Explanation:

Givens

d = 8.96

v = 10.2 cm^3

m =?

Formula

d = m / V

Solution

8.96 = m / 10.2               Multiply both sides by 10.2

8.96 * 10.2 = m

m = 91.392 grams

m = 91.4 grams rounded.

Why do elements form lons? In other words, why do elements gain or lose electrons? Be specific.

Answers

Answer: Ionic bonds form only between metals and nonmetals. That's because metals “want” to give up electrons, and nonmetals “want” to gain electrons. It takes energy to remove valence electrons from an atom and form a positive ion. Energy is released when an atom gains valence electrons and forms a negative ion

please help
find molecular formula of a compound with a molar mass of 45.0 g/mol and an empirical formula of CH3

Answers

Answer: The molecular formula will be [tex]C_3H_9[/tex]

Explanation:

Molecular formula is the chemical formula which depicts the actual number of atoms of each element present in the compound.  

Empirical formula is the simplest chemical formula which depicts the whole number of atoms of each element present in the compound.  

The empirical formula is [tex]CH_3[/tex]

The empirical weight of [tex]CH_3[/tex] = 1(12)+3(1)= 15g.

The molecular weight = 45.0 g/mole

Now we have to calculate the molecular formula:

[tex]n=\frac{\text{Molecular weight }}{\text{Equivalent weight}}=\frac{45}{15}=3[/tex]

The molecular formula will be=[tex]3\times CH_3=C_3H_9[/tex]

Thus molecular formula will be [tex]C_3H_9[/tex]

13. Which of the following shows the correct arrangement of the
levels of biological organization if arranged from smallest to largest
group?
a. tissue, organ, organ system, organism, cell,
community, population, biosphere
b. cell, tissue, organ system, organ, organism,
population, community, biosphere
tissue, cell, organ, organ system, organism,
biosphere, community, population
d. cell, tissue, organ, organ system, organism, population,
community, biosphere​

Answers

Answer:

option D is correct answer of this question

Unit 2 Test
What makes up all of the populations in an area?
they
O Niche
Habitat
Ecosystem
Community

Answers

the answer is community


When the moon changes from all dark to all light, or from new moon to full moon, the moon is said to be...

changing shape

waxing

waning

gibbous

Answers

Answer:

i think its changing shape if I'm wrong I'm sorry

Yes it’s changing shape

10. Maslow refers to the stage where one reaches his or her full developmental potential as (1 point)
O belongingness.
O esteem.
O self-actualization.
O physiological

Answers

Answer: self-actualization (C)

Explanation:

it’s at the top of the hierarchy of needs.

1. In preparing his speech for a youth association, Eric considers the demographics and other important information about the people who will be listening to him speak. Like all successful speakers, Eric is engaging in the process of

C. Analyzing the audience

2. To gather formal information about audience members' attitudes, beliefs, and values, you can

D. ask open-ended and closed ended question on a survey

3. Debbie planned a speech calling for higher student fees. She thought about how her audience might react to this message. She prepared a survey and asked a group of her classmates to take it. What kind of audience analysis did Debbie use?

C. Formal

4. Why is audience analysis important?

A. It helps you understand the audience as much as possible before giving your speech

5. The audience's educational level is a factor related to

B. demographics

6. A speaker that collects information about the audience, evaluates what has been collected, and adapts his or her speech using that information is considered a(n) _____ speaker

B. Audience-centered

7. Maslow refers to the stage where one reaches his or her full developmental potential as

C. self-actualization

8. Which of the following is a method of collecting informal data about your audience?
D. observing the audience

9. Sara is preparing a speech to endorse a political candidate. She uses the information she gathered about her audience to determine their vales, beliefs, and attitudes so she can better prepare her speech. Sara is conducting which type of analysis?

A. Psychographic analysis

10. As you learn more about the audience, you are able to identify the beliefs, values, and attitudes of the audience. This is known as

B. Psychographics

I hope this helps!

Other Questions
Please find the surface area of a sphere with a volume of 36 Which graph correctly represents the fraction 1/3y - 1/2x > 2 The air pressure inside a car tire is3.00 atm, and it creates 41,500 Nof force pushing out on the tire.What is the surface area of theinside of the tire? Draw a mechanism for the reaction of methanol with sodium amide. In the box to the left, draw any necessary curved arrows. Show the products of the reaction in the box to the right. Include any nonzero formal charges and all lone pairs of electrons. Finally, check the box to indicate which side of the reaction is favored at equilibrium. thank you!!! 20 points PLEASE HELP ME I BEG OF YOU I can't do it :( Which expressions are equivalent to 4(3+x)?Choose all that apply(A) 3 + 3+ x + x(B) 3 + 3 + 3 + 3 + x + x + x + x(C) 12 + 4x(D) 2(2x + 6)(E) 6 + 2x + 2x - 6(F) 2x + 2x + 6 + 6 Select the correct answer.Did an oxidation-reduction reaction occur in the reaction between copper sulfate and sodium sulfide?CuSO4 + Na2S CuS + Na2SO4A. This is a redox reaction because copper gained electrons.B. This is a redox reaction because sodium lost electrons.C. This is a redox reaction because sulfur gained electrons.D. This is not a redox reaction because no electrons were transferred.E. This is not a redox reaction because oxygen did not gain electrons. Figure ABCD is a rectangle. Find the value of x. X= [?] 20 points. Picture says it all. differentiate between indoor and outdoor pollution how is odysseus able to resist circes magic What is an example of anaphora in this paragraph? 25 POINTS! CORRECT ANSWER GETS BRAINLIEST! One difference between gene mutation and chromosomal mutation that Which of the following would be produced when two or more different atoms bond chemically?O A. compounds.B. elementsC. solutionsD. mixtures An object is released from rest and falls in free fall motion. The speed v of the object after it has fallen a distance y is given by v2 = 2gy. In an experiment, v and y are measured and the measured values are used to calculate g. If the percent uncertainty in the measured value of v is 3.69% and the percent uncertainty in the measured value of y is 5.00%, what is the percent uncertainty in the calculated value of g? where do women settlements flourish Solve the Anti derivative. Select the prepositional phrase. Leading visitors up Most intense struggle Through fog and wind Where they see the peak Can someone just name a pretty and historical place or landmark to visit. I am blanking. What does sublime mean in Jekyll and Hyde