2. What is the molarity of a CuBr2 solution that contains 446 g of solute in 5000 mL of solution?

Answer:

down

Explanation:

Answer

(a) F

Pole Star is a star in the galaxy and hence not a part of the solar system.

(b) T

Mercury is the smallest planet in the solar system and Jupiter is the largest planet in the solar system.

(c) T

Uranus is the farthest planet to the sun in the solar system and Mercury is the closest planet to the earth in the solar system.

(d) T

INSAT or Indian National Satellite System is a series of artificial Indian satellites used for telecommunications, meteorology and search and rescue operations.

(e) F

There are eight planets in the solar system. They are Mercury, Venus, Earth, Mars, Jupiter, Saturn, Uranus and Neptune. Note the pluto is considered as a dwarf planet.

(f) F

Orion can be seen with naked eyes. It is one of the most magnificent constellations in the sky. It has seven or eight bright stars. Orion is also called the Hunter

In this exercise, we have to use our knowledge of astronomy to identify the correct alternatives, so we find that:

1)C

2)B

3)A

4)B

5)D

6)C

Then, based on astronomy knowledge, we can identify that the true alternatives correspond to:

1)A meteor happen a streak of light above bring into being by a meteor superlative through Earth's general feeling or mood.

2)Meteoroids exist lumps of rock or iron that revolution the brightest star, just as celestial body orbiting a star, asteroids, and comets act.

3)A coma happen the fuzzy-anticipate glow that maybe visualize situated on sides the head of a comet.

4)Halley's Comet, that happen 8 kilometres (5 miles) expansive and 16 km long, travels around the Sun each 75 to 76 age in an lengthened circuit.

5)Shooting stars exist existent what astronomers call meteors. Most meteors upset fashionable the gases around the earth before they reach the ground.

6)The celestial body orbiting a star belt happen a torus-form domain in the Solar System, situated about middle from two points the orbits of the celestial body orbiting a star Jupiter and Mars.

See more about  astronomy at brainly.com/question/5165144

Explanation:

ok, forest ecosystem always recycle its resources;

dead animals are always returned to the ground, providing fertility of trees & other vegetation for the animals that consume its harvest...this ecosystem provides natural remedies for human ailments, rich soil provides farming, and re using of such, as long as it is not over harvested. The Indians that live there have vast knowledge of their surroundings...

Answer:

Since there's only 1 hour before your next dose, you skip the missed ... It happens when bacteria adapt to withstand one or more antibiotics.

Explanation:

Explanation:

From top to bottom

transfer

substance

cooler

good

energy

metal

insulator

wood

heat

particles

particles

hotter

gases

convection

energy

Answer: It is molecular

Explanation: The reason it is molecular is because it has no ions in the formula it only has the molecular mass which is the reason why it is in fact molecular

Answer:

S=Solid

Mg=Solid

B=Solid

Ca=Solid

Ar=Gas

H=Gas

Cs=Solid

Zn=Solid

Br=Liquid

Sb=Solid

N=Gas

Hg=Liquid

Explanation:

Answer:

D. chemical energy

Explanation:

Food contains chemical energy as chemical energy is stored in bonds.

Answer:

2 curies

Explanation:

This is actually pretty easy to explain.

The Radium-226 which is an isotope of the radium, have an activity of curie. This is basically used in radioactivity of certain elements.

As in both cases we have Radium -226 and we are only varying the mass of the Radium, then, we can just do a rule of 3 to calculate this:

1 g Ra-226 --------> 1 Curie

2 g Ra-226 -------->  X Curie

Solving for X:

X = 2 g * 1 Curie / 1 g

You can also see this by taking 2 grams of Ra per separate. On one side you have 1 g of Ra-226 and on the other side, you have another 1 g of Ra-226. Both have 1 Cury of activity. If you put both on the same side, you will have 1 Cury of 1 isotope plus 1 cury of the other isotope, final result? 2 curies.

Hope this helps

Answer:

it is D

Explanation:

because it is a substance that participants in a chemical reaction.

Answer:

5 piece of ribbon

Explanation:

Because ther are a piece of ribbon is shade

Answer:

number 7 or 3,5

Explanation:

sana po makatulong po sa inyo

Moles Fe₂O₃ produced : 1.16 moles

Given

2.32 moles of iron

Required

moles of Fe2O3

Solution

The reaction coefficient in a chemical equation shows the mole ratio of the reacting compounds (reactants and products)

Reaction

4 Fe + 3 O₂ ⇒  2 Fe₂O₃

From the equation, mol ratio Fe : mol Fe₂O₃ = 4 : 2, so mol Fe₂O₃ :

= 2/4 x mol Fe

= 2/4 x 2.32

= 1.16 moles

23.458 g

Given

Reaction

H2SO4 + 2NaNO2 → 2HNO2 + Na2SO4

24.14714 g of Na2SO4

Required

mass of NaNO2

Solution

mol Na2SO4 :

= 24.14714 : 142,04 g/mol

= 0.17

From the equation, mol NaNO2 :

= 2/1 x mol Na2SO4

= 2/1 x 0.17

= 0.34

Mass NaNO2 :

= 0.34 x 68,9953 g/mol

= 23.458 g

Answer:

Energy of the Reactant: increases

Energy of the product: not at all

Rate of reaction: increases

Enthalpy: not at all

Activation energy: decreases

Explanation:

Catalyst is a substance that increases the rate of reaction than normal to form a product.

Catalyst affect differently to different factors of reaction. A catalyst is meant to increase rate of reaction by lowering the activation energy, so that collision between reactant increase and that passes the energy barrier to form the product faster.

Catalyst has no effect on Enthalpy as change in enthalpy only depends on the chemical compositions of the reactants and products.

Catalyst also increases energy of reactant so that they can collide faster than before and do not affect the energy of product at all.

Hence, the correct answer is:

Energy of the Reactant: increases

Energy of the product: not at all

Rate of reaction: increases

Enthalpy: not at all

Activation energy: decreases

Explanation:

All atoms naturally want to have a completely full outermost shell of electrons.Howevee, elements in that first column of the periodic table all have one electron in their outermost shell. ..."since the alkali metals only have one valence electron,they typically achieve this state by giving up that electron.

I hope it's helpful!

An illustration of a mixture is Chex Mix. It is made out of a variety of blended ingredients, including Chex cereal, pretzels, almonds, and spices.

A mixture is a grouping of two or more compounds that are physically mixed but are not chemically bound in chemistry. Each component of the combination keeps its unique characteristics and can be physically separated from it using techniques like filtration or distillation. Both homogeneous and heterogeneous mixtures exist. Homogeneous mixtures, like seawater, have a consistent composition throughout, whereas heterogeneous combinations, like oil and water, have separate phases and an unequal distribution. An illustration of a mixture is Chex Mix.

To know more about mixture, here:

https://brainly.com/question/24898889

#SPJ6

Answer:

Gravity is your answer

Explanation:

Gravity hopes this helps

I had this question on a test in K12

The answer is By increasing the number of coils in the wires of the electromagnet.

increasing coil wires is correct, like the other person answered.

Answer:

A glass bottle kept inside the container has sulphuric acid in it. When the knob of the extinguisher is pressed, the bottle breaks. The acid comes in contact with sodium carbonate and carbon dioxide is produced. The carbon dioxide comes out through the nozzle which is directed towards the fire.

Answer:

3m/s²

Explanation:

Force applied to an object can be calculated thus;

F = ma

Where;

F = force applied (Newtons)

m = mass of substance (kg)

a = acceleration (m/s²)

According to the information provided in this question, F = 12.0 newtons, m = 4.0 kg, a = ?

Derived from F = m.a

We have; a = F/m

a = 12/4

a = 3

The resultant acceleration of the object is 3m/s².

Answer:

The molecules are held closely together in a regular pattern called a lattice. If the ice is heated, the energy of the molecules increases. ... This is why liquid water is able to flow: the molecules have greater freedom to move than they had in the solid lattice.

Explanation:

I hope this helps and pls mark me brainliest :)

Answer:

b)

Explanation:

A substance that cannot be broken down into simpler substances by chemical means. An element is composed of atoms that have the same atomic number, that is, each atom has the same number of protons in its nucleus as all other atoms of that element.

Answer:

Figure B show element

Explanation:

Element is made up of same type of atoms and in figure b only one type of atom is present

Answer:

2

Explanation:

it is #2. the answer is 2

Answer:

Hope this will help you.... Take care

Answer:

During the fractional distillation of crude oil: heated crude oil enters a tall fractionating column , which is hot at the bottom and gets cooler towards the top. vapours from the oil rise through the column. vapours condense when they become cool enough.

Hope it helps you :)

The fractionating column's crystal clear glass beads provide such a vast surface area for heated vapors to cool and condensed continuously.

The fractionating column is inserted into the mouth of the distillation flask, which contains the saturated solution to be separated.

Heated crude oil is pumped into a tall fractionating column that is heated at the bottom and cools as it rises.

The oil fumes ascend through the column. When vapors cool down sufficiently, they condense. Various heights are used to lead liquids out of the columns.

Learn more:

https://brainly.com/question/25671371?referrer=searchResults

Answer: Potassium Chloride

Explanation:

The products in the reaction HCI + NaOH → NaCl + H20, are C. NaCl and H20.

The reaction between hydrochloric acid (HCl) and sodium hydroxide (NaOH) is a neutralization reaction, which means that it produces a salt and water. In this case, the salt is sodium chloride (NaCl) and the water is H2O.

The other options are not correct because they do not include all of the products of the reaction. Option (A) includes HCl and NaOH, but it does not include H2O. Option (B) only includes HCl and NaOH. Option (D) only includes NaOH and H2O.

In conclusion, option C is correct.

Find out more on products at https://brainly.com/question/20322602

#SPJ6

Answer:

1. 35g NaCl.

2. 234g sugar.

3. 0.506L of concentrated nitric acid are needed.

4. 1.67L of 9.0M copper (II) sulfate are needed

Explanation:

Molarity is defined as the ratio between moles of solute and the volume of the solution.

1. 1.00L * (0.60mol / L) = 0.60 moles NaCl are dissolved

To convert moles to mass we must use its molar mass:

0.60mol NaCl * (58.44g/mol) =

35g NaCl

2. 2L * (0.342mol / L) = 0.684 moles Sugar = moles sucrose

0.684 mol * (342.30g / mol) = 234g sugar

3. 4L of a 2.0M are:

4L * (2.0mol/L) = 8moles

8mol * (1L / 15.8mol) = 0.506L of concentrated nitric acid are needed

4. 3.0L  * (5.0 mol / L) = 15.0 moles copper (II) sulfate.

15.0mol * (1L / 9.0mol) = 1.67L of 9.0M copper (II) sulfate are needed

Answer: The partial pressure of oxygen in the tank is 82.95 kPa.

Explanation:

According to Raoult's law, the partial pressure of a component at a given temperature is equal to the mole fraction of that component multiplied by the total pressure.

[tex]p_{O_2}=x_{O_2}\times P[/tex]  

where,

[tex]p_{O_2}[/tex] = partial pressure of oxygen

[tex]x_{O_2}[/tex] = mole fraction  of oxygen  

[tex]P[/tex] = Total pressure  

[tex]x_{O_2}=\frac{n_{O_2}}{n_{O_2}+n_{He}}[/tex],

where [tex]n_{O_2}[/tex] = moles of oxygen =[tex]\frac{68g}{32g/mol}=2.125[/tex]

[tex]n_{He}[/tex] = moles of Helium =[tex]\frac{32g}{4g/mol}=8[/tex]

[tex]x_{O_2}=\frac{2.125}{2.125+8}=0.210[/tex]

[tex]p_{O_2}=0.210\times 395kPa=82.95kPa[/tex]  

Thus the partial pressure of oxygen in the tank is 82.95 kPa.

Answer:

Explanation:Destructive interference occurs when the maxima of two waves are 180 degrees out of phase: a positive displacement of one wave is cancelled exactly by a negative displacement of the other wave. The amplitude of the resulting wave is zero.

If two waves that are completely out phase if meet they results in destructive interference. Hence, their intensities decreases for the resultant wave.

A wave of greater, lower, or the same amplitude is created when two waves merge through interference by combining their displacements at all points in space and time.

The interaction of waves that are coherent or correlated with one another, either because they originate from the same source or because their frequencies are similar or almost identical, leads to both constructive and destructive interference.

All sorts of waves, including light, radio, acoustic, surface water waves, gravity waves, and matter waves, can exhibit interference effects. In constructive interference, the waves are in single phase forms a resultant wave with higher amplitude.

When waves from out of phase meets, the resultant wave will have an amplitude less than the individual amplitudes.

Find more on interferences :

https://brainly.com/question/16098226

#SPJ6