20N
10N
40N
30N
Balanced or Unbalanced?

Answers

Answer 1

Answer:

Unbalanced

Explanation:


Related Questions

when two buses are moving in the same direction with the same velocity then a passenger in one bus finds another bus at rest. give reason.

Answers

If two buses are moving in the same direction with the same velocity, a passenger in one bus would perceive the other bus as being at rest relative to their own frame of reference. This phenomenon is known as relative motion or the principle of relativity.

The reason behind this perception is that both buses are moving with the same velocity. From the perspective of the passenger in one bus, they are also moving at the same speed and in the same direction as their own bus. Therefore, the relative velocity between the two buses is zero, and the passenger perceives the other bus as being stationary.

This perception is similar to how passengers inside a moving train may perceive nearby objects, such as other stationary trains on parallel tracks, as being at rest relative to their own moving train. It's important to note that this perception of relative rest is valid only within the frame of reference of the passenger in one bus. Observers outside the buses, or in a different frame of reference, would see both buses moving with the same velocity.

For more such questions on Relative motion

https://brainly.com/question/17228388

#SPJ11

1. A 20 Ohm resistor and a 5 Ohm lamp are connected in a single path, with a 50 amps.
What type of circuit is this:
What is the total resistance of the circuit?
What is the total voltage in this circuit?
What is the current?

Answers

The circuit given is a series resistance circuit.

1) The given circuit is a series resistance circuit.

2) Resistance, R₁ = 20 Ω

Resistance, R₂ = 5 Ω

The effective resistance of the circuit is given by,

Reff = R₁ + R₂

Reff = 20 + 5

Reff = 25 Ω

3) Total resistance of the circuit, R = 25 Ω

Current flowing through the circuit, I = 50 A

Therefore, the voltage across the circuit is,

V = IR

V = 50 x 25

V = 1250 V

To learn more about series resistance circuit, click:

https://brainly.com/question/1851488

#SPJ1


Which example best describes Newton's third law of motion?

F
When a glass slid across a table, it spilled water when it stopped suddenly.

G
An engine used less work to move a lighter car than when it moved a heavier car.

H When a passenger stepped from a boat to the shore, the boat moved away from the shore .

Answers

The best example of Newton's third law of motion is, When a passenger stepped from a boat to the shore, the boat moved away from the shore. Thus, option C is correct.

Sir Issac Newton gives three laws of motion. The first law states that an object remains at rest or in continuous motion unless an external force acted on it. The second law stated that the force is directly proportional to the acceleration of the object. Newton's third law states that, for every action, there is an equal and opposite reaction.

From the given, Newton's third law is applicable, When a passenger stepped from a boat to the shore, the boat moved away from the shore. This shows the action and reaction of the boat and shore.

Thus, the ideal solution is option C.

To learn more about Newton's law of motion:

https://brainly.com/question/29775827

#SPJ1

a group of campers decide to take a canoe trip down the river. the campers traveled 25 miles in five hours. at what average speed did the group of campers travel down the river?

Answers

The average speed of the campers down the river was 5 miles per hour.

Total distance traveled by the campers = 25 miles

Total time taken by the campers = 5 hours

Speed is defined as the rate of change in distance or altitude reached. It is a time-based quantity. In the given question, a camper's average speed can be calculated by dividing the total distance travelled by the time taken.

Calculating the average speed of the campers -

Average speed = Total distance / Time taken

Substituting the values -

= 25 miles / 5 hours

= 5

Read more about speed on:

https://brainly.com/question/24739297

#SPJ1

Why do we need to preserve food?

Answers

Answer:

to prevent food spoilage until it can be consumed

Explanation:

 Gardens often produce too much food at one time—more than can be eaten before spoilage sets in. Preserving food also offers the opportunity to have a wide variety of foods year-round. It's economic.

PLEASE HELP ON QUESTION ASAP !!!!!!
Hi please help on question . If answer is correct I'll rate you five stars a thanks and maybe even brainliest!!!

Topic btw is electric circuits


Why is it important to represent components with symbols?

Answers

It is important to represent components with symbols because it allows us to clearly and concisely communicate the information about the components without having to write out lengthy descriptions or explanations. Symbols are a convenient and standardized way of representing components, and they allow engineers, scientists, and technicians from all over the world to communicate with each other effectively and efficiently.

In addition, using symbols helps to reduce the chance of errors or misinterpretations. For example, if we were to write out a description of a component, there may be different ways to describe it, and it could be interpreted in different ways by different people. However, if we use a standardized symbol, there is no ambiguity about what the component is and how it should be used.

Symbols are also useful for simplifying complex systems. By representing components with symbols, we can create diagrams or schematics that show how the components are connected and how they work together. This makes it easier to understand and analyze complex systems, and to identify potential problems or areas for improvement.

Overall, using symbols to represent components is an essential part of engineering and science, as it allows us to communicate effectively, reduce errors, and simplify complex systems.

"The diffusion coefficient D for Al in Al2O3 is 7.48 X 10^-23 m^2/s at 1000C and is 2.48 X 10^-14 m^2/s at 1500C. Calculate the activation energy for this diffusion process."

Answers

The activation energy for the diffusion process of Al in Al2O3 is approximately 225,744 J/mol.

To calculate the activation energy for the diffusion process of Al in Al2O3, we can use the Arrhenius equation:

D = D0 * exp(-Q/RT)

where D is the diffusion coefficient, D0 is a constant, Q is the activation energy, R is the gas constant, and T is the absolute temperature.

Taking the natural logarithm of both sides, we get:

ln(D/D0) = -Q/RT

We can then use the given diffusion coefficients and temperatures to obtain two equations:

ln(D1/D0) = -Q/RT1

ln(D2/D0) = -Q/RT2

where D1 and T1 are the diffusion coefficient and temperature at 1000C, and D2 and T2 are the diffusion coefficient and temperature at 1500C.

Taking the ratio of the two equations, we get:

ln(D2/D1) = Q/R * (1/T1 - 1/T2)

Solving for Q, we get:

Q = -R * ln(D2/D1) / (1/T1 - 1/T2)

Plugging in the given values, we get:

Q = -8.314 J/mol-K * ln(2.48 x 10^-14 m^2/s / 7.48 x 10^-23 m^2/s) / (1/1273 K - 1/1773 K)

Q ≈ 225,744 J/mol

Therefore, the activation energy for the diffusion process of Al in Al2O3 is approximately 225,744 J/mol.

For more question on activation energy

https://brainly.com/question/15083463

#SPJ11

POSSIBLE POINTS: 100
What is the frequency of a wave that has a period of 0.32 seconds? Show all work and use correct units of measure

Answers

Answer: [tex]f=3.125 Hz[/tex]

Explanation:

frequency = 1 / period

[tex]f=\frac{1}{T}[/tex]

[tex]f=\frac{1}{0.32}=3.125Hz[/tex]

Therefore, the frequency of the wave is 3.125 Hz.

A 100g apple falls from a ground from a tree and lands on the ground of 6metres
a) what is the force pulling the apple and how large the force is?
b) Calculate the gravity needed.
c) energy transfer takes place.
Gonna rate the answer

Answers

(a) The  force pulling the apple is the weight of the apple and the magnitude is determined as 0.98 N.

(b) The gravity needed is 0.98 N.

(c) The energy transfer that takes place is 5.88 J.

What is the gravity needed?

The gravity needed is calculated as follows;

Fg = mg

where;

m is the mass of the apple, m = 100 g = 0.1 kgg is acceleration due to gravity = 9.8 m/s²

Fg = 0.1 x 9.8

Fg = 0.98 N

The  force pulling the apple is equal in magnitude to force of gravity and the magnitude is determined as 0.98 N.

So the pulling force on the apple is the weight of the apple.

The energy transfer that takes place is calculated as follows;

E = P.E = mgh

E = 0.98 N x 6 m

E = 5.88 J

Learn more about force of gravity here: https://brainly.com/question/2537310

#SPJ1

A __ __ is a physical item used as a standard measurement

Answers

A physical standard is a physical item used as a standard measurement

Physical measurement standard explained.

A physical standard is an object that is carefully designed, manufactured and maintained to serve as a reference or benchmark for measurements. It represents a specific quantity or characteristics with a well defined value, making it a point of comparison for other similar measurements. Physical standards are used in various fields, including science, engineering, metrology , and quality control.

Physical standards can take different forms depending on the quantity being measured. For a example a standard kilogram represent the unit of mass and a standard meter represent unit of length.

Learn more about physical measurement standard below.

https://brainly.com/question/17262133

#SPJ1

Explain physics in a essay

Answers

The scientific study of physics focuses on the underlying concepts that underpin the laws of nature. It investigates how matter, energy, space, and time behave and interact. Physics' fundamental goal is to comprehend the underlying laws and forces that create our universe.

Physics has developed theories and rules to explain a wide variety of events, from the motion of celestial bodies to the behaviour of subatomic particles, via meticulous observation, investigation, and mathematical analysis.

These theories offer a framework for comprehending and forecasting the behaviour of physical systems, such as Newton's laws of motion and Einstein's theory of relativity.

From the tiniest particles to the biggest cosmic structures, physics has enhanced our understanding of the world and sparked a host of technological advances.

To know more about Physics :

https://brainly.com/question/32123193

#SPJ1.

Atom A donates an electron to atom B. Both atoms are now...

Question 7 options:

Useful


Metallic


Safe


Charged

Answers

Answer:

Charged

Explanation:

When an atoms loses or gains electrons they become charged(ion)

When an atom loses electrons it becomes positively charged and it is called a Cation

When an atom gains electrons it becomes negatively charged and it is called an Anion

Charged when an atoms loses or gains electrons they become charged

How to model parallel circuit?

Answers

A parallel circuit can be modelled by connecting the components parallel.

A parallel circuit is a form of electrical circuit in which the components are linked in parallel to one another, each having a separate channel for current flow and being directly connected to the power source. The circuit must first be schematically represented, with the power supply and each component linked in parallel. Next, the total resistance the total current in the circuit by using Ohm's Law must be calculated.

Additionally, it is necessary to confirm that the total current entering the circuit equals the total current leaving the circuit. In a parallel circuit, the total current passing through all of the components equals the current entering the circuit. The voltage drop between each component must then be once more computed using Ohm's Law.

Read more about parallel circuits on:

https://brainly.com/question/19929102

#SPJ1

If the boy is pushing with a force of 40.0 N on the box, what is the approximate magnitude of the frictional force?

Answers

The magnitude of the frictional force is 5 N.

The force exerted by the boy on the box is 40.0 N. According to Newton's second law of motion, the net force acting on an object is equal to the product of its mass and acceleration:

F(net) = m*a

where F(net) is the net force, m is the mass of the object, and a is its acceleration.

In this case, the net force acting on the box is the force applied by the boy minus the frictional force:

F(net) = F(applied) - F(friction)

By substituting the values:

F(applied) = 40.0 N

m = 5 kg

a = 7 m/s^2

Now, by using frictional force:

F(friction) = F(applied) - F(net)

F(friction) = F(applied) - ma

                = 40.0 N - (5 kg)(7 m/s^2)

                = 5 N

To know more about frictional force refer to:

brainly.com/question/31125218

#SPJ1

24. What are the three factors Gore says are causing a collision between our civilization and the Earth? Explain each one.​

Answers

Gore argues that the combination of population growth, a globalized economy, and technological impact is driving our civilization towards a collision with the Earth, jeopardizing the well-being of future generations.

1. Population Growth: Gore argues that the rapid growth of the global population is straining the Earth's resources and ecosystems. As the population increases, so does the demand for food, water, energy, and other resources, leading to overconsumption and environmental degradation. This places a significant burden on the planet's capacity to sustain life and maintain a healthy balance.

2. Globalized Economy: The expansion of the globalized economy has resulted in increased production, consumption, and trade on a massive scale. While this has brought economic benefits and improved living standards for many, it has also contributed to environmental problems. The pursuit of economic growth often prioritizes short-term profits over long-term sustainability, leading to resource depletion, pollution, and climate change.

3. Technological Impact: Advances in technology have brought numerous benefits to society, but they have also come with unintended consequences. Industrial processes, transportation systems, and energy production have increasingly relied on fossil fuels, leading to greenhouse gas emissions and climate change. Additionally, technological advancements have accelerated the extraction and exploitation of natural resources, further straining the planet's ecosystems.

He advocates for sustainable solutions that prioritize environmental conservation, renewable energy, and responsible resource management to mitigate these challenges.

For such more questions on collision

https://brainly.com/question/8863042

#SPJ11

The 'bar-and-gauge' experiment is designed to show the effect clearly. It is difficult to see the expansion of a metal even when it is heated by several hundred degrees. The bar-and-gauge' experiment is often used to show that a metal expands when heated. Write a brief script for a teacher who wants to use this demonstration of thermal expansion and who also wants to show that metals contract on cooling. Include practical instructions.​

Answers

Thermal expansion is defined as the property of metals to expand when they are heated.

The metal expands when heated because the atoms move apart more.

An excellent method to demonstrate the concept of thermal expansion is using the bar and gauge experiment.

Both the diameter and the length are precisely comparable when both are at room temperature.

The bar will not fit within the gauge once it has been heated and cooled. Similar to the last instance; the bar will no longer fit flush inside the gauge if the gauge is heated and the bar is cooled.

To learn more about thermal expansion, click:

https://brainly.com/question/14092908

#SPJ1

Prepare a 20 question test with answers about chemical names, formulas, and chemical reactions.

Answers

1. The substance equation for water is [tex]H_2O[/tex].

2. The compound name for table salt is sodium chloride [tex](NaCl)[/tex].

3. The synthetic equation for carbon dioxide is [tex]CO_2[/tex].

4. The substance name for baking soft drink is sodium bicarbonate [tex](NaHCO_3)[/tex].

5.  The substance recipe for methane is [tex]CH_4[/tex].

6. The compound name for vinegar is acidic corrosive [tex](CH_3COOH)[/tex]

7.  The compound equation for smelling salts is [tex]NH_3[/tex].

8. The compound name for blanch is sodium hypochlorite [tex](NaClO)[/tex].

9.  The synthetic equation for hydrogen peroxide is [tex]H_2O_2[/tex].

10. The synthetic name for rust is iron oxide [tex](Fe_2O_3)[/tex].

11.  The compound recipe for sodium hydroxide is [tex]NaOH[/tex].

12. The substance name for lye is sodium hydroxide [tex](NaOH)[/tex].

13. The synthetic equation for sulfuric corrosive is [tex]H_2SO_4[/tex].

14. The compound name for gypsum is calcium sulfate dihydrate [tex](CaSO_4.2H_2O)[/tex].

15. The substance equation for table sugar is [tex]C_1_2H_2_2O_1_1[/tex].

16. The synthetic name for anti-inflamatory medicine is acetylsalicylic corrosive [tex](C_9H_8O_4)[/tex].

17. The compound recipe for calcium carbonate is [tex]CaCO_3[/tex].

18. The substance name for baking powder is a combination of sodium bicarbonate [tex](NaHCO_3)[/tex] and an acidic fixing like cream of tartar [tex](KC_4H_5O_6)[/tex].

19. The synthetic equation for sodium chloride is [tex]NaCl[/tex].

20. The substance name for hydrogen gas is [tex]H_2[/tex].

The questions are:

1. What is the synthetic recipe for water?

2. What is the substance name for table salt?

3. What is the compound equation for carbon dioxide?

4. What is the synthetic name for baking pop?

5. What is the substance equation for methane?

6. What is the synthetic name for vinegar?

7. What is the substance equation for alkali?

8. What is the substance name for blanch?

9. What is the compound recipe for hydrogen peroxide?

10. What is the synthetic name for rust?

11. What is the synthetic equation for sodium hydroxide?

12. What is the synthetic name for lye?

13. What is the substance recipe for sulfuric corrosive?

14. What is the substance name for gypsum?

15. What is the synthetic recipe for table sugar?

16. What is the substance name for anti-inflamatory medicine?

17. What is the synthetic equation for calcium carbonate?

18. What is the synthetic name for baking powder?

19. What is the substance equation for sodium chloride?

20. What is the substance name for hydrogen gas?

For more such questions on hydrogen peroxide, click on:

https://brainly.com/question/25566753

#SPJ11

Which observation is evidence that electromagnetic radiation (EMR) has particle-like
properties? (1 point)
O EMR refracts as it moves into a different medium.
O
A diffraction pattern is observed when EMR passes through a narrow slit.
O Some EMR is blocked when it passes through a polarized lens.
O EMR with energy above a certain value can eject electrons out of a metal.

Answers

The observation that electromagnetic radiation with energy above a certain value can eject electrons out of a metal is a piece of evidence that they have particle-like properties.

Electromagnetic radiations as particles

The observation that electromagnetic radiation with energy above a certain value can eject electrons out of a metal is a piece of evidence that they have particle-like properties.

This observation that electromagnetic radiation behaves like particles is known as the photoelectric effect.

It provides evidence that electromagnetic radiation exhibits particle-like properties. When EMR with sufficient energy (above a certain threshold) interacts with a metal surface, it can cause the ejection of electrons from the metal.

This behavior indicates that EMR behaves as discrete packets of energy called photons, which transfer their energy to the electrons and cause their release. The photoelectric effect supports the particle nature of EMR and is a fundamental concept in the field of quantum mechanics.

More on electromagnetic radiation can be found here: https://brainly.com/question/29646884

#SPJ1

in a race a car travels 60 times around a 3.6km track, this takes 2.4 hours.
What is the average speed of the car ?

Answers

To calculate the average speed of the car, we can use the formula:

Average speed = Total distance / Total time

Given information:

Number of laps = 60

Track length per lap = 3.6 km

Total time = 2.4 hours

First, let's calculate the total distance traveled by the car:

Total distance = Number of laps * Track length per lap

Total distance = 60 * 3.6 km

Total distance = 216 km

Now, we can calculate the average speed:

Average speed = Total distance / Total time

Average speed = 216 km / 2.4 hours

Average speed ≈ 90 km/h

So, the average speed of the car is approximately 90 km/h.

Kindly Heart and 5 Star this answer and especially don't forgot to BRAINLIEST, thanks!

Find the electric field at a point midway between two charges of +40.0x10^-9C and +60.0x10^-9C separated by a distance of 30.0cm

Answers

The total electric field produced by the charges at the midpoint is

8 x 10³ N/C.

Amount of charge on the first particle, q₁ = 40 x 10⁻⁹C

Amount of charge on the second particle, q₂ = 60 x 10⁻⁹C

Distance between the charges, r = 30 cm = 0.3 m

The expression for the electric field due to the charges is given by,

E = 1/4πε₀ x q/r²

At the midpoint between the two charges, d = 0.15 m

So, the electric field produced by the charge q₁ at the midpoint is,

E₁ = 1/4πε₀ x q₁/d²

E₁ = 9 x 10⁹ x 40 x 10⁻⁹/(0.15)²

E₁ = 1.6 x 10⁴ N/C

So, the electric field produced by the charge q₂ at the midpoint is,

E₂ = 1/4πε₀ x q₂/d²

E₂ = 9 x 10⁹ x 60 x 10⁻⁹C/(0.15)²

E₂ = 2.4 x 10⁴ N/C

Therefore, the total electric field produced by the charges at the midpoint is,

E = E₂ - E₁

E = 2.4 x 10⁴- 1.6 x 10⁴

E = 8 x 10³ N/C

To learn more about electric field, click:

https://brainly.com/question/30544719

#SPJ1

edictions: On
Analyze different investments for corporate accounts.
Peixotto Media is a small video game developer founded by two people 12 years
ago. Since then, it has grown and expanded. Now its founders, who are today its co-
presidents, have decided to incorporate. They have an initial public offering (IPO) of
its stock. John William has been following Peixotto Media's development ever since
it was a small operation and he was a high-school indie gamer. He is very excited
about the opportunity to become a co-owner of this company.
1. Peixotto Media's charter authorizes the sale of 35,000,000 shares of stock, but it
will begin by offering 20,000 of them at a par value of $4 per share. John William
currently has $500 that he would like to invest in this company's stocks.
a. How much stock will John William be able to purchase? (2 points)
b. What privileges will John William have as a shareholder in Peixotto Media? (3
Qoints)
Accessibility: Investigate
O Search
Focus

Answers

1. (a) Peixotto Media's charter authorizes the sale of 35,000,000 shares of stock, but it will begin by offering 20,000 of them at a par value of $4 per share. John William currently has $500 that he would like to invest in this company's stocks. John William will be able to purchase 125 shares of Peixotto Media stock.

(b) Privileges John William will have as a shareholder in Peixotto Media are Voting Rights, Dividend Payments, Capital Appreciation etc.

(a) In order to calculate how much stock John William will be able to purchase, we need to determine how many shares he can buy with his available funds. The par value per share is $4, so to find the number of shares he can buy, we divide his investment amount ($500) by the par value per share ($4):

Number of shares = Investment amount / Par value per share

Number of shares = $500 / $4 = 125 shares

Therefore, John William will be able to purchase 125 shares of Peixotto Media stock.

(b) As a shareholder in Peixotto Media, John William will have certain privileges. These privileges typically include:

Voting Rights: Shareholders are generally entitled to vote on matters that affect the company, such as electing the board of directors or approving major corporate decisions.

Dividend Payments: If the company declares dividends, shareholders may receive a portion of the company's profits in the form of dividend payments.

Capital Appreciation: If the value of the company's stock increases, shareholders can benefit from capital appreciation by selling their shares at a higher price than what they initially paid.

Information Rights: Shareholders have the right to access certain company information, such as financial reports or annual statements, to stay informed about the company's performance.

Liquidation Preference: In the event of the company's liquidation or bankruptcy, shareholders may have a claim on the company's assets after other obligations are fulfilled.

For more such information on: stocks

https://brainly.com/question/26128641

#SPJ11

Why is the Falcon 9 rocket so important in today's space exploration world?


It's the first rocket to have been built by robots, saving money for labor costs.


Carbon fiber is used on the outside, making it much more lightweight, requiring less fuel to launch it.


It was invented with the ability to recharge itself by using solar panels.


It's a reusable rocket and has saved money by being reused over 60 times already.

Answers

The Falcon 9 rocket is so important in today's space exploration world because It's a reusable rocket and has saved money by being reused over 60 times already.

option D.

Why is the Falcon 9 rocket so important in today's space exploration world?

The Falcon 9 rocket, is developed by SpaceX, and it holds  a significant importance in today's space exploration world due to several key features and achievements, and some of the importance include the following;

ReusabilityCost-effectivenessAdvancements in rocket technologyPayload capacity and versatilityInnovation and competition

From the given options, we can conclude that the Falcon 9 rocket is so important in today's space exploration world because It's a reusable rocket and has saved money by being reused over 60 times already.

Learn more about space exploration here: https://brainly.com/question/27325845

#SPJ1

You will need to know that Force (N) is equal to mass (kg) multiplied by acceleration (m/s2) for this problem. A fearless space explorer has discovered a new planet with a frictionless surface! He pushes a large crate with a mass of 220kg a distance of 5.3 km, as he does so, it accelerates at a rate of 2m/s2. How much work has our intrepid hero done?

Answers

Our intrepid hero has done 2332 kJ of work pushing the crate on the frictionless surface of the newly discovered planet.

The work done by the space traveler can be determined utilizing the recipe W = F x d, where W is work, F is power, and d is distance. To find the power, we can utilize the recipe F = m x a, where m is mass and an is speed increase. Connecting the given qualities, we get F = 220 kg x 2 m/s^2 = 440 N.

Presently we can compute the work done by increasing the power by the distance: W = 440 N x 5.3 km = 2332 kJ. Accordingly, our fearless legend has done 2332 kJ of work pushing the container on the frictionless surface of the newfound planet.

To learn more about work, refer:

https://brainly.com/question/31961577

#SPJ1

Josh starts his sled at the top of a 3.5-m high hill that has a constant slope of 25∘
. After reaching the bottom, he slides across a horizontal patch of snow. The hill is frictionless, but the coefficient of kinetic friction between his sled and the snow is 0.08.

Answers

If the coefficient of kinetic friction between Josh's sled and the snow is 0.08, he slides 6.97 meter from the base of the hill.

To find how far from the base of the hill Josh's sled ends up, we need to first find the speed of the sled at the bottom of the hill using the conservation of energy principle,

mgh = (1/2)mv², plugging in the values given in the problem, we get,

m(9.81 m/s²)(3.5 m) = (1/2)mv²

Simplifying and solving for v, we get,

v = √(2gh)

v = √(2(9.81 m/s²)(3.5 m))

v = 8.29 m/s

Now we can use the kinematic equation,

d = vt - (1/2)at, to find how far the sled slides on the horizontal patch of snow before coming to a stop, where d is the distance traveled, v is the initial velocity (8.29 m/s), a is the acceleration due to friction (-μg), and t is the time it takes to come to a stop (which we can find by setting v = 0 and solving for t),

0 = 8.29 m/s - μg*t

t = 8.29 m/s / μg

Substituting this value of t back into the kinematic equation, we get,

d = (8.29)(8.29/μg) - (1/2)μg(8.29/μg)²

d = 6.97 m

Therefore, Josh's sled ends up 6.97 meters from the base of the hill.

To know more about energy conservation principle, visit,

https://brainly.com/question/24772394

#SPJ1

Tom applied 10 000J of heat energy to four (4) metals A, B, C and D. All the metals were of the same mass and were initially at the same temperature. After heating the metals the temperature change was noted as shown in the table below. Metal 9 A.25 B.35 C.10 D.15 Which of these four (4) metals has the highest heat capacity?​

Answers

The metal with the highest heat capacity between metals A.25 B.35 C.10 and D.15 is metal A.

How to determine heat capacity?

Heat capacity is the amount of heat required to raise the temperature of a substance by one degree Celsius. Metal A has a heat capacity of 400 J/kg°C, which means that it takes 400 joules of heat to raise the temperature of one kilogram of metal A by one degree Celsius.

Metal B has a heat capacity of 285.7 J/kg°C, metal C has a heat capacity of 1000 J/kg°C, and metal D has a heat capacity of 666.7 J/kg°C. Therefore, metal A has the highest heat capacity of the four metals.

Metal A's high heat capacity means that it can absorb a lot of heat without its temperature changing very much. This makes metal A a good material for things like heat sinks and thermal insulation.

Find out more on heat capacity here: https://brainly.com/question/16559442

#SPJ1

What is the physics of a domino po pls in tagalog po asap langg​

Answers

the physics of a domino chain shows how momentum and kinetic energy can combine to produce an amazing display of dominoes falling.

First of all, momentum is a vector that denotes an object's mass and speed. When a domino chain is pushed over, the initial domino that was knocked over transfers momentum to the next domino, which then transfers momentum to the next, and so on. Each domino does not have to travel at the same pace as the others as long as they are in time with one another since the group of dominoes offers a coordinated transfer of momentum.

The second definition of kinetic energy is the energy that an item has as a result of motion. Kinetic energy increases each domino's speed and the power necessary to topple the subsequent domino in a chain of dominoes as momentum is transferred from one domino to the next. The largest domino, which frequently topples onto a designated catch or platform that intensifies the effect for spectators, is where the chain's greatest amount of kinetic energy is stored when it reaches its conclusion.

To know more kinetic Energy :

https://brainly.com/question/26405082

#SPJ1.

a negative charge Q1 = -5.50 is located at a point x1=-6.00 abd. positive chsrge Q2= 6.50 uc is located at point x2= 4.00 m find the magnitude and direction of the electric force between rhe charges

Answers

a negative charge Q1 = -5.50 is located at a point x1=-6.00 abd. positive charge Q2= 6.50 uc is located at point x2= 4.00 m then the magnitude and direction of the electric force between the charges is 3.56 mN and from left to right.

Coulomb's Law, which says that the electric force between two charges is directly proportional to the product of their charges and inversely proportional to the square of their distance, may be used to determine the size and direction of the electric force between the provided charges.

Given:

Q1 = -5.50 μC (negative charge)

Q2 = 6.50 μC (positive charge)

x1 = -6.00 m (position of Q1)

x2 = 4.00 m (position of Q2)

distance between the charges is

Distance (d) = |x2 - x1| = |4.00 m - (-6.00 m)| = 10.00 m

electric force (F) by using Coulomb's Law:

F = (k * |Q1| * |Q2|) / (d^2)

Where k is the electrostatic constant, which is equal to 9 × 10^9 N·m^2/C^2.

Substituting the given values:

F = (9 × 10⁹ N·m²/C² * |(-5.50 μC)| * |6.50 μC|) / (10.00 m)^2

F ≈ 3.2 mN

The magnitude of the electric force between the charges is approximately 3.56 mN.

Since Q1 is negative and Q2 is positive, the electric force acts in the direction from Q1 towards Q2. Therefore, the direction of the electric force is from left to right.

To know more about Electric Force :

https://brainly.com/question/31696602

#SPJ1.

Move numbers to the boxes to show the factor pairs of 14. Response area with 4 blank spaces Blank space 1 empty times Blank space 2 empty equals 14 Blank space 3 empty times Blank space 4 empty equals 14 Answer options with 14 options. Answer Options 1 2 3 4 5 6 7 8 9 10 11 12 13 1

Answers

Move numbers to the boxes to show the factor pairs of 14:

Blank space 1: 1

Blank space 2: 1

Blank space 3: 2

Blank space 4: 7

A factor pair of a number is a pair of whole numbers that can be multiplied together to give the original number. For the number 14, the factor pairs are (1,14) and (2,7). So, we can put 1 in the first blank, 14 in the second blank, 2 in the third blank, and 7 in the fourth blank to show the factor pairs of 14.

To show the factor pairs of 14 in the given response area with 4 blank spaces, we need to find the two numbers that can be multiplied together to give 14. These two numbers are called factor pairs of 14.

To begin, we can start listing the factors of 14. The factors of 14 are 1, 2, 7, and 14. We can then use these factors to form factor pairs by multiplying them together. The factor pairs of 14 are (1, 14) and (2, 7).

To show these factor pairs in the given response area, we can put the first factor of each pair in the first and third blank spaces, and the second factor of each pair in the second and fourth blank spaces. Therefore, we can put 1 in the first blank, 14 in the second blank, 2 in the third blank, and 7 in the fourth blank to show the factor pairs of 14.

Learn more about Whole numbers at

brainly.com/question/29766862

#SPJ1

what is the final velocity?

Answers

There are a few formulas you can use to calculate final velocity, depending on the information given:

If given initial velocity, acceleration, and time, use:

vfinal = vinitial + at

Where:

vfinal is the final velocity

vinitial is the initial velocity

a is the acceleration

t is the time

If given initial velocity, change in velocity, and time, use:

vfinal = vinitial + Δv

Where:

Δv is the change in velocity

If given displacement, initial velocity, acceleration, and time, use:

vfinal = √(vinitial2 + 2aΔx)

Where:

Δx is the displacement

If given initial and final displacements and time, use:

vfinal = Δx/t

So in summary, to calculate final velocity you need:

Initial velocity + Acceleration + Time

OR

Initial velocity + Change in velocity

OR

Initial velocity + Acceleration + Displacement + Time

OR

Initial/final displacement + Time

Then you can use the appropriate formula, plug in the known values, and solve for final velocity (vfinal).

Hope these formulas and explanations help! Let me know if you have any other questions.

Some students are using the apparatus below to observe waves in a solid. The frequency of the generator is 19Hz. The wavelength of the waves in the string is 0.2m. Calculate the wave speed. Give your answer to two significant figures.​

Answers

Answer: 3.8

Explanation: speed = wavelength x frequency

Other Questions
You are handed a spring that is 0. 400 m long. You hang the spring from a hook on the ceiling and attach a 0. 750-kg mass to the other end of the spring. The stretched spring length is 0. 450 m. What is the spring constant? according to the diathesis-stress model of schizophrenia, which of the following is true of a person with a genetic predisposition for developing schizophrenia? responses the person will definitely develop and show the disorder. the person will definitely develop and show the disorder. the person has a mother who has been diagnosed with schizophrenia. the person has a mother who has been diagnosed with schizophrenia. the person will develop symptoms of the disorder during young adulthood. the person will develop symptoms of the disorder during young adulthood. the person has a high level of dopamine activity. the person has a high level of dopamine activity. the person has an increased likelihood of developing the disorder during a period of major life changes. You enter a commission-free limit order to buy the stock of Walmart Inc. (ticker: WMT) at a price of $151.20 or better when it trades at a bid price of $151.45 and an offered price of $151.47 per share. The trade will be executed:When the offered price moves to $151.20 per shareWhen the bid price moves to $151.20 per shareImmediately at $151.47 per shareImmediately at $151.20 per shareNone of the above Let T be a (free) tree with at least two vertices. Prove that if I is a leaf in T, then T -{l} is still a tree.Be sure to point out where you're using the assumption that l is a leaf in T. If you dont know how T -{l} is defined, see HW7 Q5. Because of HW7 Q5, you don't have to show that T {l} is a graph.) b) 3 points Prove by induction on n > 1 that if a free) tree T has n vertices, then it has exactly n - 1 edges.(Use (a) and the theorem from lecture about leaves in trees.) the need for local responsiveness would be blank______ for a universal need. The preparations of two aqueous solutions are described in the table below. For each solution, write the chemical formulas of the major species present at equilibrium.You can leave out water itself. Write the chemical formulas of the species that will act as acids in the 'acids' row, the formulas of the species that will act as bases in the 'bases' row, and the formulas of the species that will act as neither acids nor bases in the 'other' row.You will find it useful to keep in mind that NH3 is a weak base. children who are classified as controversial receive _____ like-most nominations from classmates and _____ like-least nominations from classmates. which part of the brain is the primary center for appetite control? You perform a DNA extraction of your cheek cells using a Chelex solution. Which of the following statements related to your DNA extraction is false?Select one:a. The success of your extraction partially depends on having a sufficient amount of cells.b. You used Chelex to prevent the degradation of your DNA.c. The pellet after centrifuging the Chelex-DNA solution is the DNA-rich fraction.d. The supernatant after centrifuging the Chelex-DNA solution contains soluble proteins.e. The purpose of putting your microcentrifuge tube in the heat block was to disrupt the cell walls of your cheek cells. A psychologist determines that a strong, positive, linear relationship exists between an individual's IQ score and their sense of humor. She randomly selects 45 adults and found the following: IQ: mean-105, sd-12 Durante Humor Score: mean-140, sd-24 0.81 Which is the predicted Durante humor score, if the IQ score of the individual is 110? 51 142 148 149 cannot be determined from given information Name the two ways that remove the most carbon dioxide from the atmosphere. Carbon dioxide combines with water to form a single product. Name that product (label it as product #1). That product also reacts with water to produce hydronium ion and _ Name the other product of the second reaction (label it as product #2). BRIEFLY: How do these two reactions affect ocean pH? BRIEFLY: how does ocean pH affect ocean-dwelling organisms? At LaGuardia Airport for a certain nightly flight, the probability that it will rain is 0.07 and the probability that the flight will be delayed is 0.18. The probability that it will not rain and the flight will leave on time is 0.8. What is the probability that it is raining if the flight has been delayed? Round your answer to the nearest thousandth. a v = 82 v source is connected in series with an r = 1.5 k resitor and an R = 1.9- k ohm resistor and an L = 28 - H inductor and the current is allowed to reach maximum. At time t = 0 a switch is thrown that disconnects the voltage source, but leaves the resistor and the inductor connected in their own circuit.Randomized Variable V = 82 VR = 1.9 k&OmegaL = 28H You had just started a videoconference with your global team when the link was dropped and you lost both audio and video communication with the other members.- Ambiguity of intent-Loss of transmission-Organizational barrier 50 POINTS!Classify the following angle.Show your work. 10 x 10 to the power of 9 is how many times greater than 5 times 10 to the power of 3find the answer using scientific notation Healthy Dinners Co. produces frozen dinners for the health conscious consumer. During the quarter ended September 30, the company had the following cost data:Dinner ingredients $3,550,000Preparation labor 900,000Sales and marketing costs 125,000Plant production overhead 50,000Normal food spoilage 60,000Abnormal food spoilage 40,000General and administrative expenses 75,000Based on the above, what is the total amount of period expenses reflected in the companys income statementfor the quarter ended September 30?a. $200,000b. $240,000c. $290,000d. $300,000 A paper tube is formed by rolling a paper strip in a spiral and then gluing the edges together as shown below. Determine the shear stress acting along the seam, which is at 50 degrees from the horizontal, when the tube is subjected to an axial compressive force of 200 N. The paper is 2 mm thick and the tube has an outer diameter of 100 mm On March 1, a designer receives a $7,500 check in advance from a customer for design services to be provided after the customer chose a color scheme for the first floor of her house. Prepare the March 1 journal entry. in the statement: age = input('enter your age: ') , the string 'enter your age: ' is called a(n) _____. group of answer choices variable prefix prompt assignment