20pts!!!! Plutonium will go through alpha decay. Which nuclear equation is correct?
Answers
Answer:
by my knowledge, i think it is the 3rd option.
Explana tion:
Related Questions
if your not sure pls don’t answer.this is science btw.
Answers
Answer:
north and south
Answer:
north and south
Explanation:
!!
How fast can a turbidity bed form
Answers
Answer:
a matter of hours
Explanation:
how many columns are there in the s blocks of the periodic table
Answers
When a material made of iron rusts, its mass increases so does this observations violate the law of conservation of mass?
Answers
Is a new substance created when Ammonia is added to copper chloride?
Answers
Answer :Ammonia is added to a solution containing copper chloride, producing the deep blue adduct. When acid is added, the reaction is reversed.
Explanation:yes
Answer:
Ammonia is added to a solution containing copper chloride, producing the deep blue adduct. When acid is added, the reaction is reversed.
Explanation:
What happens after condensation in the water cycle?
Water cools and forms water droplets in the clouds.
Water falls to the ground as rain, sleet, hail, or snow.
Water runs across the Earth's surface.
Water turns into water vapor.
Answers
The answer will be A
Answer: A
Explanation: The water vapors after condensation are turned into water droplets which are inside the clouds, moving around the world.
How does oxygen obey the octet rule
Answers
Answer:
oxygen obey the octet rule when reacting to form compounds by adding 2 electrons.
Explanation:
Answer:
See below.
Explanation:
An oxygen atom, in free state has 8 electrons, 2 in the first shell, and 6 in the second. It can only achieve stability if the valency of the valence shell is 0. In order for this, it combines with another atom with the same valency, such as magnesium or another oxygen atom to obey the octet rule. Hope it helps.
Which object will have particles with the highest average kinetic energy?(1 point)
1. an iceberg at 0°C
2. water at 37°C in a glass
3. a drop of water at 90°C
4. water at 40°C in a swimming pool
Answers
Answer:
The answer will "a drop of water at 90°C"
Explanation:
Kinetic energy is a measurement of how fast or slow particles move. And temperature = Kinetic energy.
What does this mean?
Well, this means that the higher the temperature, the higher the kinetic energy. The mass of the water doesn't affect the kinetic energy, since the kinetic energy is the measurement of only the movement of the particles. So, we can ignore the masses. Therefore, that means the answer will be the drop of water, as it has the highest temperature.
Average kinetic energy is the average sum of all kinetic energy of all the molecules of gases. A drop of water at 90°C has the greatest average kinetic energy. Therefore option 3 is the correct option.
What is kinetic energy?
It is a energy which is possess by a moving object. It is very difficult to find the correct value of kinetic energy so we find average kinetic energy. Which is very easy to calculate as compared to calculating kinetic energy . Average kinetic energy is directly proportional to temperature. It is not dependent on the type of gases or mass of gases
Mathematically,
K.E=2/3KT
Where,
K= Boltzmann constant
T is the temperature
Water at higher temperature will have higher average kinetic energy. Among given options, a drop of water at 90°C is at higher temperature. Thus a drop of water at 90°C has the highest average kinetic energy among all. Therefore option 3 is the correct option.
Learn more about the average kinetic energy, here:
https://brainly.com/question/22174271
#SPJ5
what do you need to move a soccer ball?
Answers
PLEASE HELP MEEEEE. Calculate how many grams of hydrogen are needed to synthesize 56g of nitrogen in ammonia.
Answers
Answer:
We need 168g of hydrogen in making the ammonia
Explanation:
Using the comparison of coefficient as mol and divide it to the known molecules and multiply it by the grams of known molecule.
If a 78.51 g stone is added to a graduated cylinder, the water level rises from 20 mL to 45 mL. What is the density of the stone?
Answers
Answer:
The answer is 3.14 g/mLExplanation:
The density of a substance can be found by using the formula
[tex]density = \frac{mass}{volume}\\[/tex]
From the question
mass = 78.51 g
volume = final volume of water - initial volume of water
volume = 45 - 20 = 25 mL
So we have
[tex]density = \frac{78.51}{25} \\ = 3.1404[/tex]
We have the final answer as
3.14 g/mLHope this helps you
A force of 20 N is applied to a cart with a mass of 3 kg. What is the acceleration of the cart?
Answers
Answer:
The answer is 6.67 m/s²Explanation:
The acceleration of an object given it's mass and the force acting on it can be found by using the formula
[tex]a = \frac{f}{m} \\ [/tex]
where
f is the force
m is the mass
From the question we have
[tex]a = \frac{20}{3} \\ = 6.6666666...[/tex]
We have the final answer as
6.67 m/s²Hope this helps you
if you change the _ you change the identity of the atom
Answers
Answer:
protons
Explanation:
remember that the number of protons in the nucleus determines the protons identity
Answer:
Number of protons
Explanation:
The number of protons is unique to each element's identity and corresponds with the atomic number.
500 cm3 of a solution has a concentration of 1. 5mol/dm3 how many moles are in the solution?
Answers
Answer:
There is 0.75moles in the solution
Answer:
Explanation:
concentration=no.of moles/volume in dm3
which is
1.5mol/dm3 multiply by 500/1000
=0.75moles
how you steal a bus?
Answers
Answer:
break into it hotwire it and drive duhh
Explanation:
This is a group of protons and neutrons in the center of all atoms.
Answers
Answer:
nucleus
Explanation:
3. Are quartz and coal minerals or only naturally occurring
substances?
Answers
Answer:
minerals
Explanation:
coal is made from decomposing matter
A student has a sample of aluminum that has a mass of 27 g and a volume of 10cm3. What is the density of aluminum
Answers
Answer:
270 g/cm^3
Explanation:
d = mv
d = 27 g × 10cm^3
d = 270 g/cm^3
What are the 4 properties of the atom?
Answers
Answer:
Typical sizes of atom and nucleus.
Most of atom's mass is in the nucleus.
Constituents: protons, neutrons, electrons.
Electric force holds atom together.
Explanation:
In any chemical change, matter changes into an entirely
different substance with different chemical properties.
True or false
Answers
Answer:
True
Explanation:
Copper reacts with sulfur to form copper (i) sulfide, according to the balanced equation below. 2cu s → cu2s given that there are 40.2 g cu and 14.1 g s, complete the steps below to determine the limiting and excess reactants in the last question. how many moles are in 40.2 g cu? mol cu how many moles are in 14.1 g s? mol s
Answers
The limiting reactant would be Cu and the excess reactant would be S.
Stoichiometric reactantFrom the equation:
2Cu + S → Cu2S
Mole ratio of Cu to S = 2:1
Mole of 40.2 g Cu = 40.2/63.55
= 0.63 moles
Mole of 14.1 g of S = 14.1/32.07
= 0.44 moles
Equivalent mole of Cu = 0.44 x 2 = 0.88 moles
Thus, Cu is limiting while S is in excess.
More on stoichiometric calculations can be found here: https://brainly.com/question/8062886
Answer:
The first two are 0.633 and 0.440
The answer for the next sentence is Copper and Sulfur
Explan respinsible behaviour inthe computer
Answers
Answer:
This can be done with Python. If you learn machine learning, you can use python to automate your computers to do things.
2 things you can do with a computer with python + moreMake and run games or applications easierYour computer can send or tell you messages at a given time.I hope this answers you. If not, I may change something accordingly.
please help i dont get it
Answers
Answer:
needs?
Explanation:
we NEED water, shelter, space and food to survive.
Which of the following factors is NOT significant in determining the effectiveness of a microbial treatment?
The susceptibility of the microbe to the treatment.
The concentration of the treatment.
The toxins secreted by the microbe being treated.
The length of exposure to the treatment
Answers
Right the 2 sentences please thanks :)
Answers
Answer:
In science class me and my brother had a stem fair project where we had to find out the independent variable of our project
When water becomes ice it becomes a dependant variable
Explanation:
what are the similarities and differences of the light waves on material
Answers
Answer:
1. Sound is longitudinal waves, light waves is transverse
2. Sound is a mechanical wave, light is an electromagnetic wave
3. Speed of sound is less than the speed of light waves. For example, in air, sound travels at approximately 333.1 m/s, while light travels at about 3*10^8 m/s
4. Sound waves can't be plane-polarized while light waves can be polarized.
Explanation:
Which of the following could be the chemical formula for a compound?
Group of answer choices
C + O2
Si
H2O
Zn
Answers
Answer:
H20
Explanation:
Which of the following statements is true?
A. Magnesium (Mg) is brittle.
B. Iodine (I) is magnetic.
C. Copper (Cu) conducts heat.
D. Iron (Fe) has a low density.
Answers
Answer:
I think it's C.copper conducts heat
The elements of the periodic table are arranged in the families and periods based on their properties. Copper (Cu) is a transition metal that can conduct electricity. Thus, option C is correct.
What are transition metals?Transition metals are the metallic elements that are arranged in groups 3 - 12 and periods 4-7. They are also called d-block elements due to the electron present in the d orbit of the atom making them capable of bond formation.
They all show the properties of metals that include shininess, luster, conductivity, etc. The series include copper, iron, cobalt, gold, zinc, chromium, nickel, manganese, molybdenum, etc.
Copper being a transition metal has the property of conducting electricity and is used in wirings as they have loosely bounded electrons in their shell that can carry the electrical charge in a circuit.
Therefore, option C. copper (Cu) can conduct electricity and heat is correct.
Learn more about transition metals here:
https://brainly.com/question/15723396
#SPJ5
The deciduous forest supports a diverse ecology. A warm growing season with abundant moisture encourages plants to grow, and the ground is covered with small plants, flowers, ferns, and grasses. In spring the trees and shrubs produce new leaves and colorful flowers. In summer the tall trees cast shade on the forest floor, providing ideal growing conditions for shade-tolerant plants. Seeds and berries provide for plant reproduction, and feed small rodents and birds. The leaves that fall in the autumn provide plenty of material for decomposers, soil bacteria, worms, grubs, and fungi. All these plants together are the primary producers. If berries were destroyed and taken out of the food web, which organisms would be directly affected? *
10 points
Captionless Image
The snake, the owl, and the fox would be directly affected by the loss of berries.
The mouse and the frog would be directly affected by the loss of berries.
No organisms in the food web would be directly affected by the loss of berries.
The squirrels, rabbits, and grasshoppers would be directly affected by the loss of berries.
Answers
Answer:
The squirrels, rabbits, and grasshoppers would be directly affected by the loss of berries.
Explanation:
Refer to the attached picture below.
The arrows in the diagram represent which way the energy flows. There are only three ways the energy flows directly to an organism. Those are to the grasshopper, the frog, and the rabbit. (in the picture below, these are circled in red.)
Therefore, we can assume that the correct answer would be D. The squirrels, rabbits, and grasshoppers would be directly affected by the loss of berries.
Hope this helps! Brainliest would be much appreciated. Have a great day!
Water is called the ____ ______
Answers
Water is called the universal solvent
Please mark as brainliest