When two gases interact with each other, they can exchange energy through various processes such as collisions and heat transfer.
In this case, we have two monatomic gases, A and B, that interact with each other. Gas A has 2.1 moles and an initial thermal energy of 4500 J, while gas B has 2.6 moles and an initial thermal energy of 8100 J.
During their interaction, the gases can exchange thermal energy through collisions. If the gases are in contact, they can exchange energy through conduction. If they are separated by a barrier, they can exchange energy through radiation. The specific mechanism of energy exchange depends on the conditions of the system.
Without knowing the specific conditions of the system, it is difficult to determine the exact outcome of the interaction between gas A and gas B. However, some general observations can be made based on the initial conditions of the gases.
Since gas B has a higher initial thermal energy than gas A, it is likely that energy will flow from gas B to gas A. This could lead to an increase in the thermal energy of gas A and a decrease in the thermal energy of gas B.
However, the exact amount of energy exchange depends on the specific conditions of the system, such as the temperature and pressure of the gases, and the nature of their interaction.
In summary, when two gases interact, they can exchange energy through various processes such as collisions and heat transfer. The specific outcome of the interaction depends on the conditions of the system, but in general, energy will tend to flow from the gas with higher thermal energy to the gas with lower thermal energy.
To learn more about energy exchange refer here:
https://brainly.com/question/12494990
#SPJ11
I need some help with with question:
How could you prepare 100 ml of a 0.40 mol/L of MgSO4 solution from a stock solution of 2.0 mol/L MgSO4. And then how would u prepare it?
Answer:
C1V1=C2V2
C1 is 2.0mol/l
V1=?
C2=.4mol/L
V2=100ml or for this 0.1L
V1 is 20ml
Best way to prepare this is to measure out 20ml of the 2 molar solution and add 80mL to it to get to 100mL
Explanation:
N2 + 3H2 → 2NH3 How many grams of hydrogen are necessary to react completely with 853.42g of nitrogen in the above reaction?
Answer: 182.87 grams of hydrogen are necessary to react completely with 853.42g of nitrogen.
Explanation:
The balanced chemical reaction is :
[tex]N_2+3H_2\rightarrow 2NH_3[/tex]
[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex]
[tex]\text{Number of moles of nitrogen}=\frac{853.42g}{28g/mol}=30.479moles[/tex]
According to stoichiometry:
1 mole of [tex]N_2[/tex] react with = 3 moles of [tex]H_2[/tex]
30.479 moles of [tex]N_2[/tex] will react with=[tex]\frac{3}{1}\times 30.479=91.437moles[/tex] of [tex]H_2[/tex]
Mass of [tex]H_2[/tex] =[tex]moles\times {\text {Molar mass}}=91.437mol\times 2g/mol=182.87g[/tex]
Thus 182.87 grams of hydrogen are necessary to react completely with 853.42g of nitrogen.
If I initially have a gas at a pressure of 12 kPa, a volume of 23 liters, and a temperature of 200 K, and then I raise the pressure to 14 kPa and increase the temperature to 300 K, what is the new volume of the gas?
Answer:
The new volume of gas would be 30 L.
Explanation:
This is an example of a Combined Gas Laws problem.
what's the correct answer? brainliest
Answer:
Explanation:accurate but not precise
Describe the modern system of classification. Help please!
Answer:
its called TAXON0MY
Explanation:
they are classified in eight steps namely doma!n, k!ngdom, phylum, class, order, family, genus, and spec!es
but sometimes we do not include doma!n
if you want to name an organism you use both the genus group and the spec!es group
Example:
The scientific name for humans like us is h0m0 sap!ens
H0m0- This is our genus group
sap!ens- This is our spec!es group
sorry for using the exclamation mark it means i
Answer:
The modern system of classification is a hierarchy with eight levels. These levels are domain, kingdom, phylum, class, order, family, genus, and species. There are three domains and six kingdoms in the modern system.
Explanation:
what might be a formula for calculating distance
Answer:
Distance = speed * Time
hope it helps
Answer:
Distance formula (x2 - a1) ° + (y2 - Yı)?
d - d = distance
(x1, Y1) coordinates of the first point
(x2, Y2) = coordinates of the second point
Chlorine reacts very violently. What about its electron shells makes this the case?
Answer:
it readily gains another electron. the outer electron shell is closer to the nucleus, than iodine for example, which makes it less shielded (greater attraction for another electron = violent reaction to get it)
Explanation:
ssignment Vhat challenges would have existed in the spread of Christianity. pe overcome. Remember social media and cell phones did not exis R < previous
Answer:
A lot of people rejected it outright. Christians were persecuted and killed for their beliefs, and there were no cars, etc for easy transportation. Most people had to walk everywhere since horses and the like were only for the rich and royal. Hope this helps, please give me brainliest :)
Explanation:
Answer: Your not the best a spelling...
Explanation:
how many atoms of alumminum are in 3.9 mol of aluminum
Answer:
2.35 x 10²⁴ atoms Al
Explanation:
Given 3.9 moles of aluminum (Al), determine number of aluminum atoms in that quantity of substance.
By definition a mole is the mass of substance containing one Avogadro's Number (N₀) of particles. That is, 1 mole = 1 N₀ = 6.023 x 10²³ particles*.
So, if 1 mole aluminum contains 6.023 x 10²³ atoms of aluminum then
3.9 moles Al = 3.9 moles Al x 6.023 x 10²³ atoms Al/mole Al = 2.35 x 10²⁴ atoms Al.
________________
*The complete equivalent relationship is ...
1 mole (atoms or compounds) = 6.023 x 10²³ atoms or molecules = 1 formula weight of the substance = 22.4 Liters (if in gas phase at STP conditions (0°C and 1atm pressure).
________________
Sure hope this is understandable ... if not, kick back a note. Doc
Do temperature and air pressure change in a smooth, gradual way as your balloon flies higher?
Answer:
yes ?
Explanation:
from what I have learned so far, the hair gradually gets thinner and thinner with less oxygen which would change the pressure
What properties do atoms of the same element share? Select all that apply
atomic number
chemical reactivity
melting point
Answer: your answer is A
Explanation: the atoms has the same properties of the same element as the atomic number.
if you need 2.5 moles of of aluminum, how many atoms of aluminum is this?
Answer:
This can be found by my multiplying number of moles with avogadro number
So we have:
2.5 × 6.022 × 10²³
= 15.055 × 10²³
Therefore there are 15.055 × 10²³ atoms in 2.5 moles of Aluminium
Which process directly moves nutrients from animals to the air?
D.Breathing
Oxygen obtained through respiration is used by cells in the cellular respiration process to obtain energy. Each animal has a different way of performing gas exchange, but we can say that it is through breathing that all animals move nutrients directly into the air through breathing
A gas has a volume of 500cm3 when a pressure of 100,00N is exacted on it what will be it's volume if the pressure is changed to 150mm mecury at same temperature
Answer:
See explanation below
Explanation:
At first sight, it seems that the innitial pressure of 100,00 N would be 100,00 N/m² because pressure does not have units of newton alone. If this is true, then the calculations are the following (If it's not, but it's actually mm Hg, then skip the part of the conversion, and just do the procedure of solving for the volume).
The innitial pressure is 100 N/m² or simply 100 Pa. As the second pressure is in mm Hg, let's convert the Pascal units to mm Hg:
1 Pa -----> 0.007501 mm Hg
100 ---------> X
X = 100 * 0.007501 / 1 = 0.7501 mmHg
Now that we have the innitial pressure in mm Hg, and the temperature remains constant, we use the Boyle's law to solve for this:
P₁V₁ = P₂V₂
V₂ = P₁V₁ / P₂
Using this expression, let's solve for V₂:
V₂ = 0.7501 *¨500 / 150
V₂ = 2.5 cm³
Now, it's the innitial pressure is 100 mm Hg then the volume:
V₂ = 100 * 500 / 150
V₂ = 333.33 cm³
Check the units of the innitial pressure, one of these results should be the correct answer. If it's not, then please post again the question with the correct units.
Hope this helps
please someone help it’s due today(I will give brainliest)
Answer:
physical or chemical
boiling point
brittleness
opacity
color
density
ductility
shape
hardness
lustre
malleability
melting point
smell
solubility
state of matter
taste
texture
viscosity
Explanation:
Are physical characteristics of an organism not genetically passed down?
In an ecosystem, the physical characteristics of an organism are genetically passed down from one generation to another.
What is an ecosystem?Ecosystem is defined as a system which consists of all living organisms and the physical components with which the living beings interact. The abiotic and biotic components are linked to each other through nutrient cycles and flow of energy.
Energy enters the system through the process of photosynthesis .Animals play an important role in transfer of energy as they feed on each other.As a result of this transfer of matter and energy takes place through the system .Living organisms also influence the quantity of biomass present.By decomposition of dead plants and animals by microbes nutrients are released back in to the soil.
Learn more about ecosystem,here:
https://brainly.com/question/13979184
#SPJ2
The transfer of ____________ is achieved when eating and feeding exists
Answer:
the transfer of energy because eating is gaining energy from a source, so the energy from that source is being transfer to the animal.
The transfer of energy is achieved when eating and feeding exists. Chemical processes may emit or absorb chemical energy.
What is energy?The ability of a physical process to carry out work is known as energy. It's crucial to remember that simply because energy exists doesn't indicate that it is always ready to do tasks. Thermal energy, sometimes known as heat, is generated when atoms or molecules move. It may be thought of as temperature-related energy.
This energy results from the location of an item. For instance, a ball resting on a table possesses potential energy in relation to the ground because of the influence of gravity. Chemical processes may emit or absorb chemical energy. It is created by atoms and molecules establishing or breaking chemical bonds.
Therefore, the transfer energy is achieved when eating and feeding exists.
To learn more about energy, here:
https://brainly.com/question/29763772
#SPJ2
how many atoms are in each compound ?
What is the difference between a chemical symbol and a chemical formula?
Answer: A chemical symbol is a one- or two-letter designation of an element. Compounds are combinations of two or more elements. A chemical formula is an expression that shows the elements in a compound and the relative proportions of those elements. Many elements have symbols that derive from the Latin name for the element
Which of these are correct
Answer:
A
Explanation:
I'm doing that rn and that's the answer
How is the rotation of the Sun different from the rotation of Earth?
OThe parts of the Sun rotate at different speeds and the parts of Earth rotate at the same speed.
O The Sun's equator rotates faster than its poles and Earth's equator rotates slower than its poles.
O The Sun's poles rotate faster than its equator and Earth's poles rotate slower than its equator.
O The parts of the Sun rotate in different directions and the parts of Earth all rotate in the same direction
Answer:
The Sun's equator rotates faster than it's poles and Earth's equator rotates slower than it's poles.
Explanation:
A scientist is comparing 2 samples of the same compound. One is pure and the other is impure. The compound is a solid at room temperature. Explain how the scientist could tell which is the pure compound. [2]
Answer:
A glass of mineral water is not pure water.
Explanation:
Pure chemical substances
Pouring water into a glass from a bottle
Food and drink may be advertised as ‘pure’. For example, you may see cartons of ‘pure orange juice’ or ‘pure mineral water’. This means that nothing else was added to the orange juice or mineral water during manufacture. However, these substances are not pure to a scientist. In science, a pure substance contains only one element or compound.
Mineral water is mostly water, but there are other substances mixed with it. These are the ingredients that you see listed on the bottle’s label.
what is the formula for P₃O₅?
Answer:
i hope its help you
Explanation:
and goodnight,goodevening,goodmorning
calculate the volume occupied by 10g of propane gas, under normal conditions of temperature and pressure
Answer:
5.5 L
Explanation:
First we convert 10 g of propane gas (C₃H₈) to moles, using its molar mass:
10 g ÷ 44 g/mol = 0.23 molThen we use the PV=nRT formula, where:
P = 1 atm & T = 293 K (This are normal conditions of T and P)n = 0.23 molR = 0.082 atm·L·mol⁻¹·K⁻¹V = ?1 atm * V = 0.23 mol * 0.082 atm·L·mol⁻¹·K⁻¹ * 293 K
V = 5.5 LA) lizard
B) salamander
C) mouse
D) pigeon
First question and I'm already stuck. Help pls!
Answer:
definite volume. indefinite shape
Answer:
Red
Explanation:
Definite volume, indefinite shape
What is the volume of 104 g of ethine under normal conditions?
0.143 moles is the volume of 104 g of ethine under normal conditions
What is the formula for triboron silicide?
Answer:
B₃Si
Explanation:
Let's take break it down. From triboron silicide;
Tri - Three
Triboron - Three boron atoms
Silicide - Silicon (with an -ide suffix)
The formular is given as;
B₃Si
I have no idea what to put, pls help, due tmr
(science)
Answer:
It traveled for 4 seconds at a distance of about 4.1 meters. With a velocity of 10%.
Explanation:
What are some genaral properties of gases that govern their behavior
Answer:
1. Gases may be compressed
2. Gases expand when less pressure is applied.
3. Gases can be mixed.
4. Gases exert a constant pressure on its container walls.
5. Gases have low densities.