27.2 kg of a solution containing 18.7 % KCl by mass
Express your answer in kilograms using three significant figures.

The two structures are first to combine in translation are 3 and 4. Therefore, option C is correct.

The process in which the information encoded in the mRNA is used to direct the sequencing of amino acids, and therefore  it finally synthesizes a protein is called as translation.

In translation the information passed from DNA  to mRNA and turns it into a series of amino acids bound together with peptide bonds.

Translation is translation from one code of nucleotide sequence to another code of amino acid sequence.The two structures are first to combine in translation are 3 and 4.

Thus, option C is correct.

To learn more about translation, follow the link;

https://brainly.com/question/12463306

#SPJ1

Its Southern Equatorial River is diverted by the South American continent's size. The deflection of the stream causes them to flow in a different direction.

What do you understand by mass?

It's the most fundamental property of a substance and one of the fundamental physical quantities. The quantity of matter in a body is referred to as its mass. The SI gravity unit is the kilogram. (kg). The mass of a body is constant over time.

What does mass vs. weight mean?

A body's mass is the exact figure of material that composes that body, as opposed to its weight, which is the force applied to it as a consequence of the acceleration brought on by gravity. This

To know more about  mass visit:

https://brainly.com/question/15959704

#SPJ1

Lithium (Li) +1 is correctly matched with its ionic charge.

In general, elements in the first column of the periodic table (known as alkali metals) tend to have a charge of +1 when they form ions. Lithium is the first element in the first column of the periodic table, so it is correctly matched with a charge of +1.

Oxygen (O) is correctly matched with a charge of -2. Oxygen is a non-metal and in most of the compounds it forms, it has a charge of -2.

Potassium (K) +1 is also correctly matched with its ionic charge. Potassium is an alkali metal, which means it tend to have a charge of +1 when it forms ions.

Nitrogen (N) is a nonmetal and it has a charge of -3, when it forms anions like Nitride ions (N₃-). Nitrogen (N) +3 is not a correct match with its ionic charge.

Learn more about  ionic charge from

https://brainly.com/question/26036371

#SPJ1

The final balanced redox reaction in the basic solution is:

O2 + 2H2O + Cr3+ → H2O2 + Cr2O7^2- + 4OH-

Generally, The half-reaction method involves breaking the overall redox reaction into two half-reactions: oxidation and reduction. The oxidation half-reaction is:

Cr3+ → Cr2O7^2- + 3e-

The reduction half-reaction is:

O2 + 2H2O + 4e- → 4OH-

To balance the electrons in the oxidation half-reaction, we need to add 3 electrons on the right side. To balance the electrons in the reduction half-reaction, we need to add 4 electrons on the left side.

When we combine the two half-reactions, we get:

O2 + 2H2O + Cr3+ → H2O2 + Cr2O7^2- + 3e-

We then add 4OH- on the right side to neutralize the electrons on the left side, giving us:

O2 + 2H2O + Cr3+ → H2O2 + Cr2O7^2- + 3e- + 4OH-

Read more about oxidation

https://brainly.com/question/9496279

#SPJ1

The main difference between primary and secondary succession is that:

The correct option is C.

Primary succession occurs when a new piece of land is produced or is first exposed. This may occur, for instance, when lava solidifies and forms new rocks or when a glacier recedes and reveals bare rocks. In the initial succession, organisms have to start over.

When a site's current vegetation and soil cannot be completely removed due to the degree of disturbance, secondary succession develops. Secondary succession can start as a result of a variety of disturbances, including fire, flooding, windstorms, and human activity such as harvesting of forests.

Learn more about primary and secondary succession at: https://brainly.com/question/520254

#SPJ1

The dependent variable in this experiment is the number of migraines recorded in the study (option A).

Dependent variable in an experiment is the outcome measured to see the effectiveness of the treatment.

In an experiment, the independent variable is altered or changed to bring about a response in the dependent variable.

According to this question, if a scientist was attempting to decide what type of light was best for reducing migraines, the number of migraines recorded is the dependent variable.

Learn more about dependent variable at: https://brainly.com/question/1479694

#SPJ1

It is a tertiary alkyl halide that is being supplied. It will easily go through the SN1 replacement. The following steps will lead to the reaction(Attached).

A reactant known as a nucleophile provides an electron pair in order to create a covalent bond. Typically, a nucleophile has a negative charge or is neutral with one or two donatable electrons. Some examples include H2O, -OMe, or -OtBu. The species with a lot of electrons is a nucleophile overall.

A nucleophile typically has one electron pair and is negatively charged or neutral. Some examples include H2O, -OMe, or -OtBu. The species with a lot of electrons is a nucleophile overall. Generally speaking, electrophiles are positively charged or neutral organisms with vacant orbitals that are drawn to an electron-rich center.

Know more about nucleophile

https://brainly.com/question/14052597

#SPJ4

To find the volume of 25% (w/v) solution HNO3, you need to know the mass of HNO3 and the total volume of the solution.

What do you mean by volume?

Volume is a measure of the amount of space taken up by a three-dimensional object or substance. It is commonly used to measure the amount of a liquid, gas, or solid. In chemistry, volume is usually expressed in units such as liters (L), milliliters (mL), cubic centimeters (cm3), or milligrams (mg).

For example, if the total volume of the solution is 100 mL and the mass of HNO3 is 25 g, then the volume of 25% (w/v) solution HNO3 is 25 mL.

To know more about volume,

https://brainly.com/question/28564792

#SPJ1

The red light emitted by a neon sign has a frequency of 4.5410^11 Hz.

Frequency is the number of waves which passes through a fixed point at a certain time.

Here,

The frequency of the red light emitted by a neon sign is 4.54×10¹¹ Hz

Given neon sign with a wavelength of 659.9nm​

frequency of the red light is to be calculated

Wavelength and frequency are related to each other by Wavelength=Speed/frequency

speed of light is 3×10⁸ m/s

Wavelength=659.9nm that is equal to 6.599 ×10⁻⁷m

Frequency =3×10⁸ m/s÷6.599 ×10⁻⁷m

Frequency =4.54×10¹¹ Hz

The frequency of the red light emitted by a neon sign is 4.54×10¹¹ Hz.

To know more about frequency,

https://brainly.in/question/28379775

#SPJ4

Answer:

fungi and Bacteria

Explanation:

they does not form ecosystem they are micro-organisms that feed on decomposable materials

Reagents for conversion of 1-butanol to the following substances includes c). Dess-Martin periodinane in CH₂Cl₂, j). H₂/Ni, i-PrNH₂, f). SOCl₃, A). NaN₃.

Reagents are substances or compounds that are added to a system to initiate a chemical reaction or to determine whether a reaction is taking place or not. They are used in the study of chemicals. The detection of the presence of another substance is confirmed by a similar response.

Reagent names include Grignard, Tollens, Fehling, Millon, Collins, and Fenton. However, the word reagent does not appear in the names of all reagents. Solvents, enzymes, and catalysts can also be considered reagents. Reagents may also have their limits.

chemical reaction is attached below

To know more about reagents visit:

https://brainly.com/question/10700688

#SPJ4

The answer is d. 2

Put the value in 'n' and determine the molar mass. It will match with what is given in question,i.e., 46.00 g/mol.

The structural formula of (E)-1,2-dibromo-3-isopropyl-2-hexene is attached below.

In organic chemistry, isopropyl is an alternative name for propane, an alkyl functional group with three carbons.

From the name of the compound (E)-1,2-dibromo-3-isopropyl-2-hexene, hex- means the parent hydrocarbon chain has 6 carbon atoms and

-ene means this hydrocarbon has one double bond. It is present in between 2nd and 3rd carbons. 2 Bromine atoms are presented at 1st and 2nd carbons. One isopropyl group is presented at 3rd carbon of the parent chain. In this compound, the isopropyl group and bromine atom are in opposite sides of the double bond so the configuration of double bond is E.

Thus, the structural formula of (E)-1,2-dibromo-3-isopropyl-2-hexene is attached below.

To know more about isopropyl groups visit:

https://brainly.com/question/13421784

#SPJ4

The expected hybridization for the indicated atom in each of the following molecules are:

• H2c=o for c atom- sp2

• BH3 for B atom- sp2

• CH3SH for S atom- sp3

• H2C=NH for N atom- sp2

We are aware that the mixing of valence orbitals that results in the production of sigma bonds is the definition of the hybridization state. Any given organic compound's central atom's hybridization state can be determined in part by the types of orbitals that are included in mixing and the quantity of sigma bonds that are generated. The carbon atom in this instance of H2C=O possesses three bond pairs, indicating that three electron domains are present. So SP2 would be the hybridization involved. Three electron domains for BH3 boron result in sp2 hybridization. Sulfur for CH3SH has two lone pairs and four bond pairs, indicating that there are four electron domains and SP3 hybridization. Finally, the N atom in H2C=NH exhibits SP2 hybridization due to its three electron domains.

Learn more about hybridization here:

https://brainly.com/question/28265574

#SPJ4

One of the elements that can produce two or more ions with various ionic charges is Fe.

A component that makes up the entirety. When it comes to chemistry, a simple substance is one that cannot be broken down into smaller parts or changed into another substance. Atoms, which are composed of protons, neutrons, and electrons, are the basic building blocks of an element. Protons in an element have an infinite number of atoms.

The twelve natural elements are: Moon, Flower, Shadow, Light, Fire, Wind, Water, Ice, Thunder, Time, Wind, Water, Fire, Fire, Fire, and Ice. These components are each referred to by the shortened language for more sophisticated and intricate compounds.

To know more about Elements visit:

https://brainly.com/question/14347616

#SPJ4

As the acid weakens, the pH at the equivalence point rises (becomes more basic). The amount of extra base required to achieve the equivalence point grows.

Titration is a standard quantitative chemical analysis laboratory method for determining the concentration of a specified analyte. The titrant or titrator is a reagent that is produced as a standard solution of known concentration and volume. A titration is a procedure that uses a known solution to determine the concentration of an unknown solution. Typically, until the reaction is complete, the titrant (the known solution) is added from a buret to a known quantity of the analyte (the unknown solution). A titration is described as 'the process of calculating the quantity of a material A by adding calibrated increments of substance B, the titrant, with which it interacts until precise chemical equivalency (the equivalence point) is obtained'.

Here,

The pH at the equivalency point rises as the acid diminishes (becomes more basic). The quantity of additional base needed to reach the equivalence point increases.

To know more about titration,

https://brainly.com/question/2728613

#SPJ4

Atoms one of the following ketones, all of which contain hydrogen atoms (C5H10), would be created using alcohol.

The chemical formula of hydrogen is H2, and it has an molar mass of 1. The atomic number one of the lightest element is hydrogen, abbreviated H. It is a gas at room pressure and temperature that has the functional group H2 hydrogen chloride (HCl), which is a combination of elements hydrogen and chlorine. It is also tasteless, odorless, and highly combustible. Hydrochloric acid is the name given to a gaseous solution in water.

As a result, when two hydrogen atoms bind, they share electrons. The term for this is covalent bonding. In your forthcoming classes, you will receive a detailed introduction to it. Consequently, hydrogen is H2 rather than H.

To know more about Atoms visit :

https://brainly.com/question/1566330

#SPJ1

The empirical formula of a compound is NaO, and the approximate molar mass is 76 g.The answer then is Na2O2.

An empirical formula is a compound's Chemical formula that only specifies the ratios of the elements it contains and not the precise number or arrangement of atoms. This would be the compound's element with the lowest whole number ratio.

To know more about  Empirical formula refer to:

https://brainly.com/question/1603500

#SPJ1

Both B and C reaction between ethyl butanoate and ethyl amine.

Amines are organic compounds derived from ammonia by replacing one, two, or all three hydrogen atoms with alkyl or aryl groups. They are classified as primary, secondary, and tertiary amines depending on the number of carbon atoms connected to the nitrogen atom. Amines have a strong smell, and many of them are used in the production of pharmaceuticals, dyes, and other products. Amines are also important intermediates in the synthesis of many organic compounds.

In the reaction between ethyl butanoate and ethyl amine, both 1-butanol and N-ethylbutanamide are formed. Ethyl butanoate is an ester, which consists of an alcohol and an acid joined together. When ethyl amine is added, the ester breaks apart, releasing the acid and alcohol components. The acid component is then protonated by the amine, forming N-ethylbutanamide. The alcohol component, which is 1-butanol, is also released in the reaction.

To know more about amines click-
https://brainly.com/question/27511377
#SPJ4

Zeroth order represents one of the choices that is correct for this reaction, according to the statement that is given.

The conversion of one or more elements, known as reactant molecules, into one maybe more chemical drugs, known as products, is referred to as a reaction mechanism. Entities are composed of chemical elements or compounds.

Combustion, combination, decomposition, single-replacement, and double-replacement are the five fundamental categories of chemical reactions. You can categorize a reaction by looking at the reactants and the products of the reaction in question. More than single category will apply to some reactions.

To know more about Reaction visit:

https://brainly.com/question/25769000

#SPJ4

The complete question is-

The graphs below all refer to the same reaction. What is the order of this reaction?

first order

second order

Unable to predict

zeroth order

The element whose +2 ion has the ground-state electron configuration [ar] 3d^10 is Chromium (Cr).

In its +2 oxidation state, Chromium loses its two outermost electrons in the 3d sub-shell and the remaining 10 electrons form a stable electron configuration with the 3d orbitals being completely filled. This configuration is represented as [Ar] 3d^10. Chromium is the only element that has this electron configuration in its +2 oxidation state. The electronic configuration of an atom is the arrangement of electrons in its atomic orbitals. Each electron in an atom is characterized by four quantum numbers: the principal quantum number (n), the angular momentum quantum number (l), the magnetic quantum number (m), and the spin quantum number (s). The electronic configuration of an atom is usually represented by a series of numbers and letters that indicate the distribution of electrons in the different energy levels and orbitals of the atom.

Learn more about electronic configuration here:

https://brainly.com/question/14283892

#SPJ4

Answer:

The same number of each type of atom will always be present before and after a chemical reaction takes place.

Explanation:

pls mark as brainliest

b. With conc. aq. HCI, its suspension dissolves best describe(s) the behavior of an amphoteric hydroxide in water.

Amphoteric hydroxides are chemical compounds that can behave as both acids and bases. In the presence of an acid, such as hydrochloric acid (HCl), an amphoteric hydroxide will neutralize the acid and dissolve in water, forming a clear solution. In the presence of a base, such as sodium hydroxide (NaOH), an amphoteric hydroxide will react with the base and form a precipitate, which is visible as a solid that separates from the solution. So, option b. is the correct answer.

Learn more about acids here:

https://brainly.com/question/29098795

#SPJ4

The Z value is the atomic number of an atom, which is the number of protons in the nucleus of an atom.

The nucleolus is a specialized structure located in the nucleus of a eukaryotic cell. It is composed of proteins and RNA molecules, and is responsible for the production, assembly, and transport of ribosomes. The nucleolus is the site of transcription, processing, and assembly of ribosomal RNA (rRNA) precursors into the ribosomal subunits that make up the ribosome. The ribosome is the cell's protein-synthesizing machinery, and the nucleolus is essential for its production. The ribosomes are then released into the cytoplasm, where they can translate mRNA into proteins.

The N value is the number of neutrons in the nucleus of an atom, and A is the mass number, which is the sum of the number of protons and neutrons in the nucleus of an atom.

For the first pair of atoms, ^3_1 H and ^3_2 He, the Z value for both is 3, since both have 3 protons in their nucleus. However, the N value for ^3_1 H is 1 and the N value for ^3_2 He is 2. Therefore, ^3_2 He has one more neutron in its nucleus than ^3_1 H. Lastly, the A value for ^3_1 H is 1 and the A value for ^3_2 He is 4. Therefore, the mass number of ^3_2 He is 3 times higher than ^3_1 H.

For the second pair of atoms, ^14_6 C and ^15_7 N, the Z value for both is 6, since both have 6 protons in their nucleus. The N value for ^14_6 C is 8 and the N value for ^15_7 N is 7. Therefore, ^15_7 N has one less neutron in its nucleus than ^14_6 C. Lastly, the A value for ^14_6 C is 14 and the A value for ^15_7 N is 15. Therefore, the mass number of ^15_7 N is 1 higher than ^14_6 C.

For the third pair of atoms, ^19_9 F and ^18_9 F, the Z value for both is 9, since both have 9 protons in their nucleus. The N value for ^19_9 F is 10 and the N value for ^18_9 F is 9. Therefore, ^18_9 F has one less neutron in its nucleus than ^19_9 F. Lastly, the A value for ^19_9 F is 19 and the A value for ^18_9 F is 18. Therefore, the mass number of ^18_9 F is 1 lower than ^19_9 F.

To know more about nucleolus click-
https://brainly.com/question/28237246
#SPJ4

The pH of the solution is 5.07.

We know that when we mix the sodium acetate with a solution of acetic acid what we are going to have is a buffer. We know that the buffer is the kind of solution that we are able to get from a weak acid and its salt just as acetic acid and sodium acetate.

We know that;

Molarity of the salt = 0.43/0.5 L = 0.86 M

Molarity of the acid = 0.21/0.5 L = 0.42 M

Hence;

pH = pKa + log(salt/acid)

pH = 4.76 + log(0.86/0.42)

pH = 5.07

We would have a pH of 5.07

Learn more about pH:https://brainly.com/question/15289714

#SPJ1

Synthesis of 2-ethylhexanol: Butanol is then reacted with formaldehyde and a strong base such as sodium hydroxide to form 2-ethylhexanol.

One possible synthesis of 2-ethylhexanol using butanal as the only source of carbon is:

The overall reaction can be described as:

Butanal + Butanol (in presence of acid catalyst) -> Butyl Butyrate

Butyl Butyrate + H2O (in presence of aqueous acid)-> Butanoic acid + Butanol

Butanol + Formaldehyde + NaOH -> 2-ethylhexanol

It's important to notice that this is only one possible synthesis and there are different methods to obtain 2-ethylhexanol, this is also a multi-step process and each step should be optimized for yield and purity.

To know more about Butyl Butyrate visit: https://brainly.com/question/17060257

#SPJ4

N2O5 Nitrogen Oxide have the same empirical formula. The simplest whole number ratio of atoms present in a substance is its empirical formula in chemistry.

To learn more about empirical formula refer to:

https://brainly.com/question/14854985

#SPJ4

O Sodium methoxide + (S)-3-bromoheptane is the reactions would produce (S)-3-methoxyheptane in high yield.

There are 26 atoms in the (S)-3-methylheptane molecule (s). Eight carbon atoms and 18 hydrogen atoms are present (s). Therefore, C8H18 can be used to represent the chemical formula of (S)-3-Methylheptane.

The molecular formula, as opposed to the empirical formula, which gives the numerical proportions of atoms of each kind, is the basis for the chemical formula of (S)-3-Methylheptane, which is based on the molecular formula and does not include structural information.

According to the rule of conservation of mass, a chemical reaction does not cause a change in the amount of any one of the elements included in a chemical formula. In light of the chemical formula, each side of the equation must therefore represent the same amount of any given element.

To know more about atoms visit: https://brainly.com/question/1566330

#SPJ4

25.0grams of bromine is equivalent to 1.881 × 10²³ molecules.

The number of molecules of a substance can be calculated by multiplying the number of moles of the substance by Avogadro's number (6.02 × 10²³).

Avogadro's number is the number of atoms present in 12 grams of isotopically pure carbon-12, being 6.02214076 × 10²³. By definition, it is the number of elementary entities (atoms or molecules) comprising one mole of a given substance.

According to this question, sodium is combined with bromine to produce sodium bromide. If one uses 25.0g of bromine, the number of moles of bromine used is as follows:

no of moles = 25.0g ÷ 80g/mol

no of moles = 0.3125moles

no of molecules = 0.3125 × 6.02 × 10²³ = 1.881 × 10²³ molecules

Learn more about molecules at: https://brainly.com/question/28319191

#SPJ1

5'-GTCCTACGGACGCG-3' is the DNA sequence that matches the data given by shortest fragment on the left to longer fragments on the right.

Chromatography is a laboratory method used in chemical analysis to separate a mixture into its constituents. The combination is dissolved in a fluid solvent known as the mobile phase, which transports it through a system containing a substance known as the stationary phase. A chromatogram is the result of a chromatography run. It is a hardcopy or electronic file comprising the information generated during the chromatography run. Chromatography works on the premise of smearing molecules in a mixture onto a solid or surface, and a stable phase (fluid stationary phase) separates the components of a mixture while working with a mobile phase.

Here,

The DNA sequence 5'-GTCCTACGGACGCG-3' corresponds to the data provided by the smallest fragment on the left to the larger segments on the right.

To know more about chromatogram,

https://brainly.com/question/30086631

#SPJ4