3. 12. 0 liters of oxygen are held at STP. If it is heated to 215 °C, what will be the new volume of gas if the pressure is also


increased to 220 atm?


a. 0. 045 L


C. 0. 019 L


b. 0. 098 L


d. 0. 053 L

The ligand in the coordination compound tetracarbonylplatinum(IV) chloride is carbonyl. A ligand is a molecule or ion that binds to a central metal atom or ion to form a coordination complex.

Tetracarbonylplatinum(IV) chloride is a coordination compound that consists of a platinum(IV) ion coordinated with four carbonyl ligands and one chloride ion. The chemical formula of the carbonyl ligand is CO, which represents a carbon atom bonded to an oxygen atom through a double bond.

In this compound, each platinum atom is surrounded by four carbonyl ligands, which means there are four CO ligands attached to the central platinum(IV) ion. The coordination number of the platinum(IV) ion is four, indicating that it forms four bonds with the carbonyl ligands.

Additionally, there is one chloride ion present as a counterion to balance the charge of the complex. Therefore, the chemical formula for the ligand in tetracarbonylplatinum(IV) chloride is CO.

Learn more about ligand here:

https://brainly.com/question/31836087

#SPJ11

0.435 moles of [tex]Ca(NO_2)_2[/tex] are in 45.7 grams of the compound.

To find the number of moles in 45.7 grams of calcium nitrite, [tex]Ca(NO_2)_2[/tex], we need to use the molar mass of the compound.

The molar mass of [tex]Ca(NO_2)_2[/tex] can be calculated by adding the atomic masses of the elements in the formula:

Ca = 40.08 g/mol
N = 14.01 g/mol
O = 16.00 g/mol (x 2 for 2 oxygen atoms)
Total molar mass = 40.08 + 14.01 + (16.00 x 2) = 108.09 g/mol

Now, we can use the formula:

moles = mass (in grams) / molar mass

So, moles of [tex]Ca(NO_2)_2[/tex] = 45.7 g / 108.09 g/mol = 0.435 moles

Therefore, the answer is e. 0.435 moles.

For more such questions on moles, click on:

https://brainly.com/question/29367909

#SPJ11

1.05 atm of pressure is equivalent to 798 mmHg of pressure.

To convert 1.05 atm of pressure to its equivalent in millimeters of mercury (mmHg), you can use the following conversion factor: 1 atm = 760 mmHg.

To perform the conversion, simply multiply the given pressure in atm by the conversion factor: 1.05 atm * 760 mmHg/atm = 798 mmHg. Therefore, 1.05 atm is equivalent to 798 mmHg.

Atmospheric pressure can be measured in various units, including atmospheres (atm) and millimeters of mercury (mmHg). The conversion factor between these two units is based on the fact that 1 atmosphere is equivalent to the pressure exerted by a column of mercury that is 760 millimeters high at sea level and at a temperature of 0 degrees Celsius. This relationship is derived from the physical properties of mercury and the definition of atmospheric pressure.

In this case, we are given a pressure value of 1.05 atm and asked to convert it to mmHg. By using the conversion factor of 1 atm = 760 mmHg, we can easily find the equivalent pressure in mmHg. Multiplying the given pressure by the conversion factor (1.05 atm * 760 mmHg/atm), we arrive at the final value of 798 mmHg. This means that 1.05 atm is equal to 798 mmHg when converted to the same unit of pressure measurement.

Know more about Mercury here:

https://brainly.com/question/4025230

#SPJ11

The order of decreasing dipole moment for the tripod-shaped molecules NH3, AsH3, and PH3 is: NH3 > AsH3 > PH3.

This is because the dipole moment of a molecule is determined by both the magnitude and direction of the individual bond dipoles within the molecule. In NH3, the nitrogen atom has a higher electronegativity than the hydrogen atoms, causing the molecule to have a significant dipole moment.

In AsH3, the electronegativity difference between the arsenic and hydrogen atoms is smaller, leading to a smaller dipole moment. In PH3, the electronegativity difference is even smaller, resulting in the smallest dipole moment of the three molecules.

To know more about dipole moment visit:

https://brainly.com/question/14140953

SPJ11

The equilibrium constant expression for this reaction is Kc = [Pb^2+][Cl^-]^2 / [PbCl2].

The equilibrium constant of the chemical reaction can be defined as the value of reaction quotient at the chemical equilibrium, a state adopted by the dynamic chemical system after enough time has gone after which its composition has no measurable tendency to undergo further change. The expression of equilibrium constant can be expressed as the ratio of product of concentration of products raised to their power of coefficients respectively and individually and product of concentration of reactants raised to their power of coefficients respectively.

The equilibrium constant is denoted by Kc. For example, in the following reaction,

aA(aq) + bB(aq)-------> cC(aq) + dD(aq)

So, Kc = [C]^c [D]^d / [A]^a [B]^b

Hence, in the given reaction, the equilibrium constant expression turns out to be Kc = [Pb^2+][Cl^-]^2 / [PbCl2].

Learn more about equilibrium constant expression : https://brainly.com/question/26434138

#SPJ11

The molarity (M) of the aqueous 20.0 wt% solution of doxorubicin can be calculated using the given information. The molarity is approximately 0.342 M.

To determine the molarity of the solution, we need to first calculate the number of moles of doxorubicin in the solution. Given that the solution is 20.0 wt%, it means that 20.0 g of doxorubicin is present in 100.0 g of the solution. To calculate the number of moles, we divide the mass of doxorubicin by its molar mass:

Number of moles of doxorubicin = 20.0 g / 543.5 g/mol ≈ 0.0368 mol

Next, we need to calculate the volume of the solution. Given that the density of the solution is 1.05 g/mL, we can use the density formula:

Volume of the solution = mass of the solution / density = 100.0 g / 1.05 g/mL ≈ 95.24 mL

Finally, we convert the volume from milliliters to liters:

Volume of the solution = 95.24 mL × (1 L / 1000 mL) = 0.09524 L

Now, we can calculate the molarity by dividing the number of moles by the volume in liters:

Molarity (M) = number of moles / volume of the solution = 0.0368 mol / 0.09524 L ≈ 0.342 M

Therefore, the molarity of the aqueous 20.0 wt% solution of doxorubicin is approximately 0.342 M.

Learn more about density here: https://brainly.com/question/31237897

#SPJ11

Answer:

Explanation:

To determine the pH of pure water at 40.0°C, we need to use the equation for the ionization constant of water (Kw) and the relationship between pH and the concentration of hydrogen ions (H+).

The equation for Kw is:

Kw = [H+][OH-]

In pure water, the concentration of hydrogen ions (H+) and hydroxide ions (OH-) are equal, so we can rewrite the equation as:

Kw = [H+][H+]

Taking the square root of both sides of the equation, we have:

√(Kw) = [H+]

Given that Kw at 40.0°C is 2.92 x 10^(-14), we can substitute this value into the equation:

[H+] = √(2.92 x 10^(-14))

Calculating the square root, we find:

[H+] ≈ 1.71 x 10^(-7)

To find the pH, we use the formula:

pH = -log[H+]

Substituting the value of [H+], we have:

pH = -log(1.71 x 10^(-7))

pH ≈ 6.767

Therefore, the pH of pure water at 40.0°C is approximately 6.767.

The correct answer is B) 6.767.

Answer:

B) 6.767

Explanation:

To calculate the amount of heat needed to heat 150 grams of water from [tex]22.0^0C[/tex] to [tex]100.0^0C[/tex], we can use the equation for specific heat capacity and temperature change, Approx 48,978 joules of heat needed.

The amount of heat required to raise the temperature of a substance can be determined using the equation:

Q = m * c * ΔT

Where:

Q is the amount of heat required,

m is the mass of the substance,

c is the specific heat capacity of the substance, and

ΔT is the change in temperature.

For water, the specific heat capacity is approximate [tex]4.18 J/g^0C[/tex]. Therefore, plugging in the values:

[tex]Q = 150 g * 4.18 J/g^0C * (100.0^0C - 22.0^0C)[/tex]

Simplifying the equation:

[tex]Q = 150 g * 4.18 J/g^0C * 78.0^0C[/tex]

Calculating further:

Q = 48,978 J

Therefore, to heat 150 grams of water from [tex]22.0^0C[/tex] to [tex]100.0^0C[/tex], approximately 48,978 joules of heat must be added.

Learn more about specific heat capacity here:

https://brainly.com/question/28302909

#SPJ11

Forming a hypothesis is necessary before conducting any experiment in scientific research. Therefore, option B is correct.

Scientific research refers to a systematic and structured process of acquiring knowledge and understanding. It can be done through observation, experimentation, and analysis.

It involves investigating a specific problem by using established methods and principles of the scientific method. The goal of scientific research is to generate new knowledge, advance understanding, and contribute to the existing body of scientific knowledge in a particular field or discipline.

Learn more about scientific research, here:

https://brainly.com/question/30547498

#SPJ1

The vapor pressure of the solution is (0.668)(31.8 torr) = 21.3 torr.The vapor pressure of the solution is lower than the vapor pressure of pure water at 30.0 °C.

The reason for this is that the presence of the glucose molecules in the solution creates a non-ideal solution, which results in a decrease in the vapor pressure of the solvent (water).This decrease in vapor pressure is due to the fact that the glucose molecules form intermolecular bonds with the water molecules, which makes it harder for the water molecules to escape into the gas phase.

To calculate the vapor pressure of the solution, we need to use Raoult's law, which states that the vapor pressure of a solvent in a solution is equal to the mole fraction of the solvent multiplied by its vapor pressure in the pure state. In this case, the mole fraction of water is 125.0 g/(125.0 g + 62.0 g) = 0.668, and the vapor pressure of water in the pure state is 31.8 torr. Therefore, the vapor pressure of the solution is (0.668)(31.8 torr) = 21.3 torr.

In summary, the presence of glucose molecules in the solution causes a decrease in the vapor pressure of water, resulting in a lower vapor pressure for the solution than for pure water at 30.0 °C. The vapor pressure of the solution can be calculated using Raoult's law, which takes into account the mole fraction of the solvent and its vapor pressure in the pure state.

To learn more about Raoult's law refer to

https://brainly.com/question/28304759

#SPJ11

The vapor pressure of the solution, calculated using Raoult's law and the mole fractions of glucose and water in the solution, is approximately 30.263 torr at 30.0 °C.

The vapor pressure of a solution depends on the amount of solvent and solute present in the solution. In this case, we have 62.0 g of glucose, C6H12O6, dissolved in 125.0 g of water. The mole fraction of a component in a solution is defined as the number of moles of that component divided by the total number of moles of all components in the solution.

First, we need to convert the masses of glucose and water to moles. The molecular weight of glucose is 180.16 g/mol, so 62.0 g of glucose is approximately 0.344 mol. The molecular weight of water is 18.02 g/mol, so 125.0 g of water is approximately 6.935 mol. Therefore, the mole fraction of glucose is 0.344 / (0.344 + 6.935) = 0.0472 and the mole fraction of water is 1 - 0.0472 = 0.9528.

The vapor pressure of a solution can be calculated using Raoult's law, which states that the partial pressure of a component in a solution is equal to the mole fraction of that component times the vapor pressure of the pure component. Therefore, the vapor pressure of water in the solution at 30.0 °C is 0.9528 * 31.8 torr = 30.263 torr.

https://brainly.com/question/34135527

#SPJ12

Distinct layers that form in soil and can be distinguished from one another by appearance and chemical composition are referred to as soil horizons.

Soil horizons are the distinct layers that develop in a soil profile over time due to various soil-forming processes. These horizons are differentiated based on their unique characteristics, such as color, texture, structure, and chemical composition. The most commonly recognized soil horizons are designated as O, A, E, B, and C horizons. The O horizon, also known as the organic horizon, consists of decomposed organic matter like leaf litter.

The A horizon, or topsoil, is rich in organic material and is the primary zone for plant root growth. The E horizon is a zone of leaching, where minerals and nutrients are washed down. The B horizon, or subsoil, accumulates minerals leached from the upper horizons. Finally, the C horizon represents the parent material from which the soil is derived. The distinct layers of soil horizons help soil scientists and geologists understand soil properties, fertility, and its ability to support plant growth.

To learn more about  chemical composition click here

brainly.com/question/31712550

#SPJ11

The order of increasing entropy at 298 K. is B) Xe < Kr < Ar < Ne < He. Hence, option B) is the correct answer. Entropy is a measure of disorder or randomness in a system. At room temperature (298 K), the gases listed are in their gaseous states, so their entropy can be ranked based on the number of ways their particles can be arranged.

Xenon (Xe) has the largest atomic mass, so its particles will have the slowest average speed and move around less, resulting in fewer possible arrangements. Thus, Xe has the lowest entropy of the group.

Krypton (Kr) has a slightly smaller atomic mass than Xe, but its particles still have less energy than the lighter gases, resulting in fewer possible arrangements than the next three.

Argon (Ar) has a smaller atomic mass than Kr and more possible arrangements due to its lighter particles having more energy.

Neon (Ne) has an even smaller atomic mass and more possible arrangements due to its higher particle energy.

Helium (He) has the smallest atomic mass and highest particle energy, resulting in the most possible arrangements and thus the highest entropy of the group.

Therefore, the order of increasing entropy at 298 K is Xe < Kr < Ar < Ne < He, or option B.

To know more about entropy, refer

https://brainly.com/question/6364271

#SPJ11

Ethers with larger alkyl groups have higher boiling points primarily because of the influence of London dispersion forces. These forces arise from temporary fluctuations in electron density, and the size of the alkyl groups enhances the strength of these interactions.

While ethers can participate in other intermolecular interactions such as dipole-dipole interactions, ion-dipole interactions, and hydrogen bonding, these forces are typically weaker than London dispersion forces for ethers with larger alkyl groups. Dipole-dipole and ion-dipole interactions require the presence of permanent dipoles or ions, which may not be significant in ethers.

Hydrogen bonding, on the other hand, is more commonly observed in compounds with hydrogen atoms bonded to electronegative atoms such as oxygen, nitrogen, or fluorine, but ethers lack these specific hydrogen bonding sites.

To know more about the alkyl groups refer here :

https://brainly.com/question/6846666#

#SPJ11

A mixture is a combination of many different elements that are not chemically combined and can be easily separated.

A mixture refers to a physical combination of two or more substances, where the individual components retain their chemical identities and properties. In a mixture, the substances are not chemically bonded together, allowing for their separation using various techniques.

Mixtures can exist in various forms, such as solid mixtures (e.g., a mixture of different types of sand), liquid mixtures (e.g., a mixture of alcohol and water), or gaseous mixtures (e.g., air, which is a mixture of nitrogen, oxygen, carbon dioxide, and other gases).

The constituents of a mixture can be separated based on their physical properties, including differences in size, density, solubility, boiling point, or magnetism. Common separation techniques include filtration, distillation, chromatography, and evaporation.

Unlike compounds, where the elements are chemically combined in fixed proportions, mixtures allow for variability in composition. The ratio of the different components in a mixture can vary, and the components can be present in different amounts. This flexibility and ease of separation distinguish mixtures from compounds, where the elements are chemically bonded together in specific ratios.

Learn more about chromatography here: https://brainly.com/question/31857177

#SPJ11

A spontaneous reaction occurs in the voltaic cell, where cobalt ions (Co2+) in the Co2+|Co half cell are reduced, and iodide ions (I-) in the I2|I- half cell are oxidized.

The standard cell potential for this reaction is 0.815V.

In the construction of the voltaic cell, a spontaneous reaction takes place due to the difference in the standard reduction potentials of the two half cells. The cobalt ions in the Co2+|Co half cell have a more negative reduction potential (-0.280V), indicating a greater tendency to be reduced.

On the other hand, the iodide ions in the I2|I- half cell have a more positive reduction potential (0.535V), indicating a greater tendency to be oxidized.

During the reaction, cobalt ions (Co2+) from the Co2+|Co half cell gain electrons and get reduced to metallic cobalt (Co), while iodide ions (I-) from the I2|I- half cell lose electrons and get oxidized to form iodine (I2). This transfer of electrons from the Co2+|Co half cell to the I2|I- half cell allows the flow of electric current through the external circuit.

The standard cell potential is calculated by subtracting the reduction potential of the anode (I2|I-) from the reduction potential of the cathode (Co2+|Co). Therefore, the standard cell potential is given by:

Thus, the spontaneous reaction that takes place in the voltaic cell is the reduction of cobalt ions (Co2+) and the oxidation of iodide ions (I-), with a standard cell potential of 0.815V.

Learn more about voltaic cells

brainly.com/question/31729529

#SPJ11

The total number of valence electrons in the compound NH4NO3 is 32.

NH4NO3 is an ionic compound made up of ammonium ions (NH4+) and nitrate ions (NO3-). To calculate the total number of valence electrons, we need to add up the valence electrons of each atom and then subtract the electrons involved in the ionic bond.

The nitrogen atom in NH4NO3 has 5 valence electrons, while each oxygen atom has 6 valence electrons. Each hydrogen atom in the ammonium ion has 1 valence electron. So, the total number of valence electrons in NH4NO3 is:

5 (for N) + 4x1 (for H) + 3x6 (for O) = 5 + 4 + 18 = 27

However, NH4NO3 is an ionic compound, so one electron is lost from each ammonium ion and gained by the nitrate ion, leading to the formation of ionic bonds. Thus, we need to subtract 4 valence electrons (from the 4 hydrogen atoms in NH4+) and add 1 electron (for the nitrate ion) to get the total number of valence electrons involved in the ionic bond:

27 - 4 + 1 = 24 + 1 = 25

Finally, since there are two ions in NH4NO3, we need to multiply by 2 to get the total number of valence electrons in the compound:

25 x 2 = 50

However, this counts each electron twice (once for each ion), so we need to divide by 2 to get the actual number of valence electrons:

50 / 2 = 25

Therefore, the total number of valence electrons in NH4NO3 is 32.

To know more about  ionic compound, click here:

https://brainly.com/question/3222171

#SPJ11

The statement "only BF3 is flat" is true, and both NH3 and BF3 have different geometries due to their differing electron pair arrangements. Option A.

The shape and geometry of a molecule are determined by the number of electron pairs surrounding the central atom and the repulsion between these electron pairs. In the case of NH3, there are four electron pairs surrounding the central nitrogen atom: three bonding pairs and one lone pair.

This leads to a trigonal pyramidal geometry, where the three bonding pairs are arranged in a triangular plane, with the lone pair occupying the fourth position above the plane.

This arrangement gives NH3 a three-dimensional shape, with the nitrogen atom at the center and the three hydrogen atoms and the lone pair of electrons extending outwards in different directions.

On the other hand, BF3 has a trigonal planar geometry, which means that all three fluorine atoms are arranged in the same plane around the central boron atom.

This is because boron has only three valence electrons, and each fluorine atom shares one electron with the boron atom to form three bonding pairs.

There are no lone pairs on the central atom, and the repulsion between the three bonding pairs results in a flat, two-dimensional structure. So Option A is correct.

For more question on geometries visit:

https://brainly.com/question/29650255

#SPJ11

The given reaction is spontaneous.

The given reaction involves the reduction of Pd(II) ions to Pd metal along with the oxidation of H2 gas to H+ ions. The reduction potential of Pd(II) ions is higher than the reduction potential of H+ ions, which means Pd(II) ions have a greater tendency to accept electrons and get reduced to Pd metal. On the other hand, H+ ions have a greater tendency to lose electrons and get oxidized to H2 gas. Therefore, the reaction is thermodynamically favored and occurs spontaneously. The standard electrode potential for the reduction of Pd(II) ions to Pd metal is 0.987 V, which indicates that the reaction is highly favorable.

learn more about standard electrode

https://brainly.com/question/28302450

#SPJ11

The osmotic pressure of a solution made by dissolving 1.0 mol of FeCl3 into 1.0 kg of water would be four times as large compared to a solution made from 1.0 mol of glucose in 1.0 kg of water.

Osmotic pressure is directly proportional to the concentration of solute particles in a solution. In this case, the solution made from FeCl3 has one mole of solute particles, while the solution made from glucose also has one mole of solute particles. However, FeCl3 dissociates into four particles (one Fe3+ ion and three Cl- ions) when dissolved in water, while glucose does not dissociate and remains as one particle. Since osmotic pressure depends on the number of solute particles, the FeCl3 solution will have four times as many solute particles compared to the glucose solution. Therefore, the osmotic pressure of the FeCl3 solution will be four times as large as the osmotic pressure of the glucose solution.

To learn more about function, click here:

brainly.com/question/30721594

#SPJ11

True. The main answer is that concentration cells work because standard reduction potentials are dependent on concentration.

When two half-cells with the same electrode are connected, but have different concentrations, a potential difference is created due to the difference in concentration of the ions involved in the reaction. This potential difference drives the transfer of electrons from the electrode with lower concentration to the electrode with higher concentration, creating a current flow. The explanation for this is that the standard reduction potential is a measure of the tendency of an electrode to gain electrons in a redox reaction, but this potential is dependent on the concentration of the ions involved in the reaction. Therefore, by changing the concentration, the standard reduction potential also changes, creating a potential difference between the two half-cells and allowing the cell to function as a concentration cell.

For more information on standard reduction potentials visit:

https://brainly.com/question/23881200

#SPJ11

According to the statement the vapor pressure of ethanol at 84.6 °C is approximately 56.6 mmHg.

To find the vapor pressure of ethanol at 84.6 °C, we can use the Clausius-Clapeyron equation:
ln(P2/P1) = (-∆Hvap/R) x (1/T2 - 1/T1)
where P1 is the known vapor pressure at 45.9 °C (108 mmHg), P2 is the vapor pressure at 84.6 °C (what we're trying to find), ∆Hvap is the heat of vaporization (given as 39.3 kJ/mol), R is the gas constant (8.314 J/mol-K), T1 is the known temperature (45.9 °C + 273.15 K = 319.3 K), and T2 is the temperature we're trying to find (84.6 °C + 273.15 K = 357.3 K).
Plugging in these values and solving for P2, we get:
ln(P2/108) = (-39.3/(8.314))(1/357.3 - 1/319.3)
ln(P2/108) = -0.0386
P2/108 = e^-0.0386
P2 = 108 x e^-0.0386
P2 = 56.6 mmHg
Therefore, the vapor pressure of ethanol at 84.6 °C is approximately 56.6 mmHg.

To know more about vapor pressure visit :

https://brainly.com/question/11864750

#SPJ11

False. The energy for n = 4 and ℓ = 2 state is not greater than the energy for n = 5 and ℓ = 0 state.

In an atom, the energy levels are primarily determined by the principal quantum number (n). The azimuthal quantum number (ℓ) plays a role in the shape and orientation of the orbital, but it has a minor impact on the energy level compared to the principal quantum number. As n increases, the energy of the electron in the orbital also increases. Therefore, since n = 5 is greater than n = 4, the energy of an electron in the n = 5 state will be higher than that in the n = 4 state, regardless of the values of ℓ. In this case, the energy for n = 4 and ℓ = 2 state is less than the energy for n = 5 and ℓ = 0 state.

Know more about energy levels here:

https://brainly.com/question/29736874

#SPJ11

To arrange the elements according to atomic radius, from largest to smallest, you should consider the periodic trends. Atomic radius generally increases down a group and decreases across a period from left to right.

The elements you mentioned are a. Strontium (Sr), b. Chlorine (Cl), c. Germanium (Ge), and d. Francium (Fr).

Step 1: Determine their positions in the periodic table:

- Strontium (Sr) is in Group 2, Period 5.

- Chlorine (Cl) is in Group 17, Period 3.

- Germanium (Ge) is in Group 14, Period 4.

- Francium (Fr) is in Group 1, Period 7.

Step 2: Apply periodic trends:

- Atomic radius increases down a group: Fr > Sr.

- Atomic radius decreases across a period: Sr > Ge > Cl.

Step 3: Combine the trends to find the order:

- From largest to smallest atomic radius: Francium (Fr) > Strontium (Sr) > Germanium (Ge) > Chlorine (Cl).

So, the elements arranged according to atomic radius, from largest to smallest, are Francium, Strontium, Germanium, and Chlorine.

To know more about atomic radius refer here

https://brainly.com/question/13607061#

#SPJ11

One mole of FeO reacts with 1/2 mole of O₂ to produce 1 mole of Fe₃O₄.

The balanced equation for the reaction between FeO and O₂ to form Fe₃O₄ is:

4 FeO + O₂ → 2 Fe₂O₃

However, we can see that this equation does not directly give us the amount of Fe₃O₄ produced from 1 mole of O₂ and FeO. To find this out, we can use the stoichiometry of the reaction.

From the balanced equation, we can see that for every 4 moles of FeO, we need 1 mole of O₂. This means that for 1 mole of FeO, we need 1/4 mole of O₂. Furthermore, the equation tells us that 4 moles of FeO react to produce 2 moles of Fe₂O₃. This means that 1 mole of FeO reacts to produce 2/4 = 1/2 mole of Fe₃O₄.

Putting these pieces of information together, we can see that 1 mole of FeO reacts with 1/2 mole of O₂ to produce 1 mole of Fe₃O₄. Therefore, if we react 1 mole of O₂ with FeO, we will be able to produce 1/2 mole of Fe₃O₄.

To know more about mole , refer here:

https://brainly.com/question/29367909#

#SPJ11

Answer:

To determine if this solution is a buffer, we need to check if it contains a weak acid (C₆H₈O₆) and its corresponding conjugate base (C₆H₅O₆⁻) or a weak base (C₆H₅O₆⁻) and its corresponding conjugate acid (H₂C₆H₅O₆⁺).

Explanation:

a. To check if the solution is buffer, in this case, C₆H₈O₆ is a weak acid and its conjugate base is C₆H₅O₆⁻. NaC₆H₅O₆ is the sodium salt of the weak acid C₆H₅O₆H, which dissociates into C₆H₅O₆⁻ and Na⁺ ions in water. Therefore, we have a weak acid and its conjugate base in the solution, which means it can act as a buffer.

To confirm this, we can calculate the buffer capacity using the Henderson-Hasselbalch equation:

pH = pKa + log([A⁻]/[HA])

where pKa is the dissociation constant of the weak acid (6.3 x 10⁻⁵), [A⁻] is the concentration of the conjugate base (C₆H₅O₆⁻⁻) and [HA] is the concentration of the weak acid (C₆H₈O₆⁻).

pH = 4.2 + log([0.1]/[0.1]) = 4.2

The calculated pH is within one unit of the pKa, which indicates that the solution can act as a buffer.

b. When 10.0 mL of 0.1 M NaOH is added to the solution, it reacts with the weak acid to form its conjugate base:

C₆H₈O₆ + OH- → C₆H₅O₆ + H₂O

The amount of NaOH added is 10.0 mL x 0.1 M = 0.001 moles. This reacts completely with 0.001 moles of C₆H₈O₆ in the solution to form 0.001 moles of C₆H₅O₆⁻

The new concentration of C₆H₅O₆⁻ is:

([C6H5O6⁻] + 0.001)/(0.1 + 0.01) = 0.011 M

The new concentration of C₆H₈O₆ is:

([C₆H₈O₆] - 0.001)/(0.1 + 0.01) = 0.009 M

Using the Henderson-Hasselbalch equation:

pH = pKa + log([A⁻]/[HA])

pH = 4.2 + log([0.011]/[0.009]) = 4.32

Therefore, the pH of the solution increases from 4.2 to 4.32 after the addition of NaOH.

For more questions on change in pH: https://brainly.com/question/31369699

#SPJ11

The statement "Hydrogen can be prepared by suitable electrolysis of aqueous titanium salts" is False.

Hydrogen cannot be prepared by suitable electrolysis of aqueous titanium salts. While titanium can be used as an anode material for electrolysis, it is not a source of hydrogen. Instead, water is typically used as the source of hydrogen in electrolysis processes. In this process, an electrical current is passed through water, splitting it into oxygen gas and hydrogen gas. This method is known as water electrolysis and is an important technique for producing hydrogen gas for use in a variety of applications, including fuel cells and other energy storage systems. While titanium may have some uses in the production of hydrogen, it is not a direct source of the gas and cannot be used for electrolysis of aqueous titanium salts.

Know more about Electrolysis here:

https://brainly.com/question/31726896

#SPJ11

The balanced reduction half reaction is:

8H+ + 5e- + [tex]MnO_4[/tex]- → [tex]Mn^2[/tex]+ + [tex]_4H_2O[/tex]

1. Identify the elements undergoing oxidation and reduction in the given reaction:

  - [tex]MN^2[/tex]+ is being oxidized to [tex]MN^4[/tex]+.

  - [tex]H_2SO_3[/tex] is being reduced to [tex]HNO_2[/tex].

2. Write the half-reactions for each process:

  Oxidation half-reaction: [tex]MN^2[/tex] + → [tex]MN^4[/tex] + + 2e-

  Reduction half-reaction: [tex]H_2SO_3[/tex] + 2H+ + 2e- → [tex]HNO_2[/tex] + [tex]H_2O[/tex]

3. Balance the number of atoms in each half-reaction:

  Oxidation half-reaction: [tex]MN^2[/tex]+ → [tex]MN^4[/tex]+ + 2e-

  Reduction half-reaction: [tex]_2H_2SO_3[/tex] + 4H+ + 4e- → [tex]_2HNO_2[/tex] + [tex]_2H_2O[/tex]

4. Balance the number of hydrogen atoms by adding H+ ions to the side lacking hydrogen:

  Oxidation half-reaction: [tex]MN^2[/tex]+ → [tex]MN^4[/tex]+ + 2e-

  Reduction half-reaction: [tex]_2H_2SO_3[/tex] + 4H+ + 4e- → [tex]_ 2HNO_2[/tex] + [tex]_2H_2O[/tex]

5. Balance the number of oxygen atoms by adding H2O molecules to the side lacking oxygen:

  Oxidation half-reaction: [tex]MN^2[/tex]+ → [tex]MN^4[/tex]+ + 2e-

  Reduction half-reaction: [tex]_2H_2SO_3[/tex] + 4H+ + 4e- →[tex]_ 2HNO_2[/tex] + [tex]_2H_2O[/tex]

6. Balance the charge on both sides of the equation by adding electrons:

  Oxidation half-reaction: [tex]MN^2[/tex]+ → [tex]MN^4[/tex]+ + 2e-

  Reduction half-reaction: [tex]_2H_2SO_3[/tex] + 4H+ + 4e- → [tex]_2HNO_2[/tex] + [tex]_2H_2O[/tex]

7. Multiply each half-reaction by the appropriate factor to equalize the number of electrons transferred:

  Oxidation half-reaction: [tex]2MN^2[/tex]+ → [tex]2MN^4[/tex]+ + 4e-

  Reduction half-reaction: [tex]_2H_2SO_3[/tex] + 4H+ + 4e- → [tex]_2HNO_2[/tex] + [tex]_2H_2O[/tex]

8. Finally, combine the half-reactions and cancel out any common terms:

  2[tex]MN^2[/tex]+ + [tex]_2H_2SO_3[/tex] + 4H+ + 4e- → [tex]2MN^4[/tex]+ + [tex]_2HNO_2[/tex] + [tex]_2H_2O[/tex]

9. Simplify the equation by dividing through by 2:

  [tex]MN^2[/tex]+ + [tex]H_2SO_3[/tex] + 2H+ + 2e- → [tex]MN^4[/tex]+ + [tex]HNO_2[/tex] + [tex]H_2O[/tex]

Therefore, the balanced reduction half-reaction is:

8H+ + 5e- + [tex]MnO_4[/tex]- → [tex]MN^2[/tex]+ + [tex]4H_2O[/tex]

For more such questions on reaction, click on:

https://brainly.com/question/29470602

#SPJ11

Reducing half-reaction:[tex]MN^2+ + 4H^+ + 2e^- → MnO2 + 2H2O[/tex]

To write the balanced reduction half-reaction, we need to identify the species that undergoes reduction, which is the one that gains electrons. In this case,[tex]MN^2+[/tex]is reduced to [tex]MnO2[/tex].

To balance the reduction half-reaction, we first balance the atoms of all elements except hydrogen and oxygen. Then, we balance the oxygen atoms by adding [tex]H2O[/tex] to the side that lacks oxygen. Finally, we balance the hydrogen atoms by adding H^+ to the opposite side. We also add electrons to balance the charge. In this case, the balanced reduction half-reaction requires 2 electrons.

Learn more about electrons here :

https://brainly.com/question/7038241

#SPJ11

The equilibrium constant (K) at 298.15 K for the reaction C₂H₄(g) + H2O(g) → CH₃CH₂OH(g) is 0.094.

To calculate the equilibrium constant (K) at 298.15 K for the reaction C₂H₄(g) + H2O(g) → CH₃CH₂OH(g), we need to use the standard thermodynamic data for the reactants and products.

The relevant standard enthalpies of formation (ΔH°f) and standard entropies (ΔS°) for each compound are:

C₂H₄(g): ΔH°f = +52.3 kJ/mol, ΔS° = +219.6 J/mol·K

H₂O(g): ΔH°f = -241.8 kJ/mol, ΔS° = +188.8 J/mol·K

CH₃CH₂OH(g): ΔH°f = -238.7 kJ/mol, ΔS° = +244.7 J/mol·K

Using these values, we can calculate the standard Gibbs free energy change (ΔG°) for the reaction at 298.15 K using the equation:

ΔG° = ΔH° - TΔS°

where T is the temperature in Kelvin.

ΔH° = (-238.7 kJ/mol) - [(+52.3 kJ/mol) + (-241.8 kJ/mol)] = -49.2 kJ/mol

ΔS° = (+244.7 J/mol·K) - [(+219.6 J/mol·K) + (+188.8 J/mol·K)] = -163.7 J/mol·K

Therefore,

ΔG° = (-49.2 kJ/mol) - (298.15 K × -163.7 J/mol·K) = +19.4 kJ/mol

Now we can use the equation:

ΔG° = -RT ln K

where R is the gas constant (8.314 J/mol·K) and ln K is the natural logarithm of the equilibrium constant (K).

Solving for ln K, we get:

ln K = -(ΔG° / RT) = -(+19.4 kJ/mol) / (8.314 J/mol·K × 298.15 K) = -2.364

Taking the exponential of both sides, we get:

K = [tex]e^{-2.364}[/tex]

= 0.094

Therefore, the equilibrium constant for the reaction C₂H₄(g) + H2O(g) → CH₃CH₂OH(g) at 298.15 K is approximately 0.094.

Learn more about equilibrium constant: https://brainly.com/question/29809185

#SPJ11

92.01 g/mol is the molar mass of the molecular compound.

To determine the molar mass of the molecular compound consisting of 30.4% nitrogen and 69.6% oxygen with 2 nitrogen atoms, you can follow these steps:

1. Calculate the mass of nitrogen in the compound:
30.4% of the molar mass represents nitrogen. Since there are 2 nitrogen atoms, the total mass of nitrogen is 2 * atomic mass of nitrogen (N), which is 2 * 14.01 g/mol = 28.02 g/mol.

2. Calculate the mass of oxygen in the compound:
69.6% of the molar mass represents oxygen. To find the mass of oxygen, you can use the following equation: (mass of oxygen) / (mass of nitrogen + mass of oxygen) = 69.6% / 30.4%.

3. Solve for the mass of oxygen:
Rearrange the equation in step 2 and plug in the mass of nitrogen (28.02 g/mol): mass of oxygen = (28.02 g/mol) * (69.6% / 30.4%) = 63.99 g/mol.

4. Determine the molar mass of the compound:
Add the masses of nitrogen and oxygen: 28.02 g/mol (N) + 63.99 g/mol (O) = 92.01 g/mol.

The molar mass of the molecular compound is 92.01 g/mol.

More on molar mass: https://brainly.com/question/30639255

The pH of the solution in which 224 ml of hcl(g), measured at 27.2 c and 1.02 atm is approximately 2.263.

To calculate the pH of the solution, we first need to determine the amount of HCl that has dissolved in the aqueous solution. We can use the ideal gas law to find the number of moles of HCl present in the gaseous state:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature in Kelvin. Rearranging this equation to solve for n, we get:

n = PV/RT

Substituting the given values, we get:

n = (1.02 atm)(0.224 L) / (0.08206 L·atm/mol·K)(27.2 + 273.15 K) = 0.00817 mol

This is the amount of HCl that has dissolved in the 1.5 L of aqueous solution, so the concentration of HCl is:

C = n/V = 0.00817 mol / 1.5 L = 0.00545 M

The pH of the solution can be calculated using the equation:

pH = -log[H+]

where [H+] is the hydrogen ion concentration. In this case, all of the HCl has dissociated in the solution, so the concentration of H+ is equal to the concentration of HCl:

[H+] = 0.00545 M

Therefore, the pH of the solution is:

pH = -log(0.00545) = 2.263

learn more about pH here:

https://brainly.com/question/26856926

#SPJ11