Answer:
he element is Neon (Ne).
Neon's unusually high third ionization energy is due to its stable electron configuration. On a Bohr diagram, Neon has two electrons in the 1s orbital, eight electrons in the 2s and 2p orbitals, and two electrons in the 3s orbital, giving it a complete shell of eight electrons (a stable configuration). This means that it takes more energy to first remove an electron from the third orbital, accounting for its unusually high 3rd ionization energy.
Neon (Ne), which is in the second period and possesses an incredibly high third ionization energy, is the element.
What is neon?The persistent electron structure of neon contributes to its very high third ionization energy. Neon has two electrons in the 1s orbital, eight electrons in the 2s and 2p orbitals, two electrons in the 3s orbital, and a total of eight electrons in the entire eight-element shell on a Bohr diagram (a stable configuration).
As a result, the explanation for the exceptionally high third ionization energy is that it requires more energy to first remove an electron from the third orbital.
Chemically speaking, neon is an element with the symbol Ne and atomic number 10. Noble gas describes it. Under normal circumstances, neon is a colorless, odorless, inactive monatomic gas, with roughly two-thirds of its mass.
For more information on neon kindly visit to
https://brainly.com/question/8226528
#SPJ1
Sand and computer chips share which element as their basic component?
O silicon
O carbon
O oxygen
O. silver
A winery has a ton of wine. It cost the producers of the wine $ 30,481.92 to make the wine. If
the winery sells 5 oz. glasses of wine how much money does the winery need to charge to
double their money on the ton of wine?
A glass of wine costs about $12 at a pub. A 5-ounce glass of wine, or 147 mL, counts as one serving. This indicates that the typical bottle can accommodate five 5-ounce wine glasses. Ten wine glasses can fit within a magnum bottle. 20 glasses of wine fit inside a double-magnum bottle.
A tonne of wine weighs how much?A case of 12 wine bottles contains 9 litres, or 2.378 gallons, as a typical wine bottle is 750 millilitres in size. A tonne of grapes yields 150 gallons every tonne, which translates to 150/2.378 gallons each case, or just over 63 cases, of wine. We have a total of 756 bottles, 12 bottles each case.
How much wine does one ounce equal?Since 1 ounce equals slightly under 30 ml, a glass has a volume of 120 ml. A 750 ml bottle of wine will therefore yield slightly more than 6 glasses.
To know more about wine visit:
https://brainly.com/question/17547547
#SPJ1
expected to strike more
frequently this century?
formed in the
atmosphere?
likely become stronger or
weaker this century?
Which areas are at
the highest risk for
hurricanes?
Which types of hurricanes
are expected to drop in
frequency by more than
25% this century?
How many category 4
and 5 hurricanes can
we expect this century?
Evidence of a Changing Climate: Mastery Test
The type of hurricane is expected to strike more frequently this century will be Category 4 + 5C.
What is hurricane?One of nature's most potent storms is the hurricane. They cause tornadoes, rip currents, and inland flooding by way of strong winds, storm surge flooding, and heavy rainfall.
Hurricanes are storms with maximum sustained winds of 74 mph or higher. Based on a hurricane's maximum sustained winds, the Saffir-Simpson Hurricane Wind Scale assigns a hurricane a rating, or category, from 1 to 5.
Strong winds, a spiral arrangement of thunderstorms that produce heavy rain and squalls, a low-pressure center, and a closed low-level atmospheric circulation are the characteristics of a tropical cyclone, a rapidly rotating storm system.
In this case, the chart shows how climate change and rising ocean temperatures might affect the types of hurricanes we see this century and the bars show the results from different math models used to make the predictions. hurricane is expected to strike more frequently this century will be Category 4 + 5C. This can be seen in the diagram.
Learn more about hurricane on:
https://brainly.com/question/28476314
#SPJ1
The chart shows how climate change and rising ocean temperatures might affect the types of hurricanes we see this century. The bars show the results from different math models used to make the predictions.
Category 1 includes the least powerful hurricanes. Categories 2 and 3 are moderate hurricanes. Categories 4 and 5 include the most powerful hurricanes.
A. Which type of hurricane is expected to strike more frequently this century
What is the Insight's rating in kilometers per liter?
Answer:
I don't use this
Explanation:
Which of the following molecules or substances contain, or are derived from, fatty acids? A) Beeswax B) Prostaglandins C) Sphingolipids D) Triacylglycerols
Beeswax, Prostaglandins, Sphingolipids, Triacylglycerols all the molecules are derived from fatty acids all the given options are correct.
Which 4 essential fatty acids are there?Saturated, monounsaturated, polyunsaturated, and trans fatty acids are the four broad categories into which fatty acids can be divided. The risk of coronary heart disease is heightened by trans fats and saturated fatty acids.
A fatty acid typically has a straight chain with an even number of carbon atoms, hydrogen atoms running along it, a carboxyl group (COOH) at one end of the chain, and hydrogen atoms running along it once more. It is an acid because of the carboxyl group (carboxylic acid).
To know more about fatty acids visit:
https://brainly.com/question/1837143
#SPJ4
10. A gas has a volume of 100.0 mL
at a pressure of 600.0 mm Hg. If
the temperature is held constant,
what is the volume of the gas at a
pressure of 800.0 mmHg?
The pressure of a given mass of an ideal gas is inversely proportional to volume at constant temperature, according to Boyle's law.
P1V1 = P2V2 = (600mmhg*100.0ml = 800mmhg*V2)
The volume of the gas at a pressure of 800 mm Hg is 75 mL.
What does Boyle's law stipulate?This empirical relationship, which Robert Boyle, a scientist, first proposed in 1662, argues that, under constant temperature, the pressure (p) of a given amount of gas changes inversely with its volume (v); in equation form, this means that pv = k, a constant.
What exactly are Boyle's law and Charles law?According to Boyle's Law, as pressure lowers, gas volume grows. According to Charles' Law, when the temperature rises, the volume of the gas also rises.
To know more about Boyle's law visit :-
https://brainly.com/question/1437490
#SPJ1
Draw the missing product of the following reaction. Assume excess halogen is present.
They were given the term halogen because they all create sodium salts with comparable properties, the most well-known of which is sodium chloride, also known as table salt or halite.
The name halogen comes from the Greek roots hal- ("salt") and -gen ("to produce"). There are thorough notes on the chemical displacement reactions of chlorine, bromine, and iodine as well as descriptions of the physical characteristics of the Group 7 halogens, which include fluorine, chlorine, bromine, iodine, and astatine. Because they have seven valence electrons, halogens are special because they are very reactive. The electrons involved in chemical reactions are valence electrons, which are located in the outer shell. For the outer shell to be stable and non-reactive, it needs eight electrons.
Learn more about chemical here:
https://brainly.com/question/26487468
#SPJ4
The K_a for hydrofluoric acid is 7.2 times 10-4. This means that HF is O a weak acid O neutral in water solution
O a strong acid O ionic O able to react with HCl
The HF is a weak acid as Kₐ for hydrofluoric acid is 7.2*10^-4.
What is weak acid?Weak acids are acids that do not dissociate entirely in solution. A weak acid, in other terms, is any acid that is not a strong acid. A weak acid's strength is determined by how much it dissociates: the more it dissociates, the stronger the acid. A strong acid is an acid that is totally ionized in water. In an aqueous solution, a weak acid is one that ionizes just minimally. Weak acids are far more prevalent than strong acids. They can be found in everyday foods such as vinegar (acetic acid) and lemon juice (citric acid).
Here,
Because the Ka for hydrofluoric acid is 7.2*10-4, HF is a weak acid.
To know more about weak acid,
https://brainly.com/question/17011616
#SPJ4
predict the product, if any, of reaction between propanoyl chloride and ch3co2- +na.
The nucleophilic acyl substitution process that results in the formation of an anhydride is caused by the acetate ion in CH3CO2Na+ acting as a nucleophile towards propanoyl chloride.
Acetic anhydride, having the chemical formula (CH3CO)2O, is the most significant component of the organic anhydrides. It can be made industrially in one of two ways: either by atmospheric acetaldehyde oxidation in the presence of a metal acetate or from acetic acid by the reaction with ketene or acetylene. The conjugate base or ion with the chemical formula C2H3O2-, which is generally found in aqueous solution, is also referred to as "acetate." An anion is a negatively charged ion. Your blood's concentration of chloride is crucial for maintaining the right ratio of acid and water in your body.
Learn more about chloride here
https://brainly.com/question/15296925
#SPJ4
If a reaction has an equilibrium constant K < 1, is Eº positive or negative? O Eº is positive. O Eº is negative.
If a reaction has an equilibrium constant K < 1, the Eº is negative. hence Eº is negative in the following question
The equilibrium constant (K) for a reaction is a measure of the relative concentrations of reactants and products at equilibrium. The value of K is related to the standard Gibbs free energy change (ΔGº) for the reaction by the equation ΔGº = -RT ln K, where R is the gas constant and T is the temperature in Kelvin.The standard electrode potential (Eº) is a measure of the tendency of a chemical species to gain or lose electrons. The relationship between Eº and ΔGº is given by the equation ΔGº = -nF Eº, where n is the number of electrons involved in the reaction and F is the Faraday constant.
Learn more about equilibrium constant here:
https://brainly.com/question/19671384
#SPJ4
the 5s electron in rubidium (rb) sees an effective charge of 2.771e. Calculate the ionization energy of this electron.
The 5s electron in rubidium (rb) sees an effective charge of 2.771e, then the ionization energy of this electron is -4.18 e.v.
Ionization energy: what is it?The ionization energy is a metric for an element's capacity to engage in chemical processes that call for the donation of electrons or the formation of ions. It is also generally correlated with the type of chemical bonding that occurs when elements combine to form compounds. additionally see electron affinity and binding energy.
The amount of energy required to ionise an atom is known as the ionisation energy. As we descend a group, ionisation energy falls. Crossing the periodic table from left to right, ionisation energy rises.
En = 5 = -Zeff². 13.6e.v/n²
En = 5 =( -2.771/5)²×13.6
En = 5 = -4.18 e.v
E ionization = En = 5 = -4.18 e.v.
To know more about ionization energy visit:
https://brainly.com/question/28385102
#SPJ4
The process represented by A:
The process represented by A is how producers create energy.
The correct option is A.
What are producers?Producers include all types of green plants. By absorbing sunlight and using the energy to create sugar, green plants produce their food. This sugar, also known as glucose, is used by the plant to produce a variety of materials, including wood, leaves, roots, and bark.
Producers create energy through the process of photosynthesis.
The process of photosynthesis results i the production of food in the form of glucose.
Learn more about producers at: https://brainly.com/question/22300808
#SPJ1
How many grams of FeSO_4 (Mw = 152.0 g/mol) are present in a 20.0 ml sample of a 0.500 M solution? A) 65.8 g B) 6.08 g C) 3.04 g D) 1.52 g E) 0.760 g
Answer:
i thinks it is B
Explanation:
Which of the following pairs of molecules are structural isomers? Select all that apply.
2-methylpentane and 2-methylhexane
2,3-dimethylbutane and 2-methylpentane
2-methylpentane and 3-methylpentane
hexane and 2-methylhexane
2,3-dimethylbutane and 2-methylpentane, 2-methylpentane and 3-methylpentane are the following pairings of compounds that are structural isomers, making options 2 and 3 correct.
The identical atoms that make up structural isomers are present, but they are organized differently from one another. The term "constitutional isomerism" also applies to structural isomerism. When compared to stereoisomerism, which involves isomers with the same atoms in the same sequence and with the same bonds but different orientations in three-dimensional space, this is not the case. Three types of structural isomers exist: Chain isomerism and skeletal isomerism are structural isomers in which the order of the skeleton's elements is altered. Constitutional isomerism in which a functional group or substituent shifts position on a parent structure is known as position isomerism (sometimes referred to as regioisomerism).
Learn more about isomers here
https://brainly.com/question/12796779
#SPJ4
Except for the K shell, the maximum number of electrons that can be in the outermost shell of an atom is
A. 8
B. 16
C. 4
D. 32
A. 8 is the maximum number of electrons that can be in the outermost shell of an atom is
The maximum number of electrons that can occupy the outermost shell of an atom is 8, also known as the octet rule. This means that all elements in the periodic table will have 8 electrons in the outermost shell, except for the elements in the first row of the s-block, which can contain a maximum of 2 electrons, or the elements in the second row of the p-block, which can contain a maximum of 6 electrons. The K shell, or the first energy level of an atom, can contain up to 2 electrons, with the exception of hydrogen, which only has one. The L shell, or the second energy level of an atom, can contain up to 8 electrons. The M shell, or the third energy level of an atom, can contain up to 18 electrons. The N shell, or the fourth energy level of an atom, can contain up to 32 electrons. Hence, the maximum number of electrons that can be in the outermost shell of an atom is 8.
To know more about octet rule click below:
https://brainly.com/question/865531#
#SPJ4
Option (a) is correct. Except K shell the maximum number of electrons that can be in the outermost shell of an atom is 8. This is according to the octet rule.
According to the octet rule, the outermost shell in an atom cannot have more than eight electrons even if it has a capacity to take up more electrons. The octet rule is explained as a chemical rule that reflects the theory that the elements tend to bond in such a way that each atom has eight electrons in its valence shell giving it the same electronic configuration as a noble gas. It refers to the the tendency of atoms to prefer to have eight electrons in the valence shell. The octet rule states that atoms are at their most stable when they have 8 electrons in their outermost shell. Atoms tend to try and gain or lose electrons until they have eight electrons in their outer shell.
To learn more about Octet rule please visit:
https://brainly.com/question/865531
#SPJ4
Which is NOT a variable in the Beer–Lambert law?
A- the path length through the sample
B- the molar extinction coefficient
C- the concentration of the sample
D- the wavelength of light
E- the absorbance of the sample
The Beer Lambert law does not take into account the wavelength of light. It claims that the sample path length and sample concentration are directly proportional to the light absorbance for a given material.
According to the following equation, the Beer Lambert law connects a solution's qualities to how much light it absorbs: A = bc, where b is the path length, c is the concentration of the absorbing species, and is the molar absorptivity of the absorbing species. The radiation is assumed to be monochromatic while deriving the law. Therefore, if bandwidth increases, divergence will result. According to the Beer-Lambert law, the characteristics of the medium through which light is moving affect how much light is attenuated.
To learn more about concentration click here https://brainly.com/question/18247103
#SPJ4
draw the products formed when the following amides are treated with water and hcl.
Hydrolysis of amide gives Carboxylic acid and ammonium salts while in base medium we get amine along with Carboxylic acid. the products formed are shown in the 1st attachment.
An amide is a functional group in organic chemistry that consists of a carbonyl group (C=O) linked to a nitrogen atom (NH2 or NH-). The general structural formula for an amide is R-C(=O)-NR' where R and R' can be any organic group. Amides are a class of compounds that have a wide range of applications in various fields, from medicine to agriculture. They are found in many natural products, such as peptides and proteins, and also in many synthetic compounds. Hydrolysis is a chemical reaction that uses water to break down a compound. The addition of a water molecule (H2O) to a substrate typically results in the separation of that substrate into two smaller molecules, one of which is a hydroxide ion (OH-). The other molecule formed in the reaction is determined by the substrate being hydrolyzed.
learn more about functional group here:
https://brainly.com/question/14618322
#SPJ4
The complete question is :
draw the products formed when the following amides are treated with water and hcl.
if atoms are neutral (have no overall charge), what can you infer about the number of protons and electrons in an atom? How should these numbers compare? explain your thinking
If atoms are neutral, that means that the number of protons and electrons in an atom are equal.
What is an atom?One or more electrons are attached to the nucleus of every atom, which is made up of a nucleus. Protons and neutrons, in various numbers, make up the nucleus. Neutrons exist only in the most prevalent type of hydrogen.
Atoms that are neutral or ionized are the building blocks of all solids, liquids, gases, and plasma. A normal atom is 100 picometers across, which is incredibly small. Because of quantum effects, they are so small that it is impossible to predict their behavior with sufficient precision using classical physics, as if they were, say, tennis balls.
An atom's nucleus makes up more than 99.94% of its mass. The electric charge of the protons is positive, the charge of the electrons is negative, and there is no electric charge on the neutrons.
If atoms are neutral, that means that the number of protons and electrons in an atom are equal. This is because protons carry a positive charge, while electrons carry a negative charge. In order for an atom to be neutral, the number of protons and electrons must be the same, so that the positive and negative charges balance out. Therefore, the number of protons and electrons in an atom should be the same, and the atom is neutral.
To know more about atoms visit:
https://brainly.com/question/13654549
#SPJ1
CH4(g)+2O2(g)→CO2(g)+2H2O(g) ΔH°<0
Which of the following statements must be true for the combustion of CH4(g), represented by the equation above?
A) The bond dissociation energy between O atoms in O2 is greater than the sum of the bond dissociation energies of the two O−H bonds in H2O.
B) More bonds are formed in the products than are broken in the reactants.
C) The sum of the bond dissociation energies of the product molecules is equal to the sum of the bond dissociation energies of the reactant molecules.
D) The sum of the bond dissociation energies of the product molecules is greater than the sum of the bond dissociation energies of the reactant molecules.
The sum of the bond dissociation energies of the product molecules is equal to the sum of the bond dissociation energies of the reactant molecules.
define bond dissociation energies ?
The conversion factor 23.060 kcal/mol (96.485 kJ/mol) for each eV may be used to translate a molar BDE to the energy required to dissolve the bond per molecule.
Bond dissociation energy values have been measured using a variety of experimental techniques, including spectrometric determination of energy levels, radical generation via pyrolysis or photolysis, chemical kinetics and equilibrium measurements, and various calorimetric and electrochemical methods. Nonetheless, bond dissociation energy measurements are difficult and vulnerable to significant error. The bulk of currently known values are within 1 or 2 kcal/mol (4-10 kJ/mol) of being correct. Furthermore, values measured in the past, particularly prior to the 1970s, can be unreliable and have been subject to revisions of the order of 10 kcal/mol.
To learn more about Bond dissociation follow the given link: https://brainly.com/question/2279755
#SPJ1
which of the following best describes what took place before the step pictured in the diagram? O An electron was promoted from the 2p orbital to the 3s orbital O An electron was promoted from the 3s orbital to the 3p orbital O Two 3_p electrons became unpaired
Option A is correct. An electron was promoted from the 2p orbital to the 3s orbital.
What is an electron?The elementary electric charge of the electron, a subatomic particle, is a negative one. Due to their lack of known components or substructure, electrons, which are part of the first generation of the lepton particle family, are typically considered to be elementary particles. The mass of an electron is around one-eighth that of a proton (1/1836). The electron's inherent angular momentum (spin), which is measured in terms of the scaled-down Planck constant,, is one of its quantum mechanical properties. The Pauli exclusion principle states that because electrons are fermions, no two of them may be in the same quantum state.
Electrons, like all elementary particles, have the ability to interact with other particles and behave like waves when they are diffracted, similar to how light does. Since electrons have a smaller mass than other particles like neutrons and protons and a longer de Broglie wavelength for a given energy, their wave characteristics are simpler to see experimentally than those of other particles like neutrons and protons.
To know more about electrons visit:
https://brainly.com/question/1255220
#SPJ4
Piperidine (C5H11N) is an amine found in black pepper. Find Kb for piperidine in the appendix C, and then calculate Ka for the C5H11NH+ cation.
Find Ka for HOCl in the appendix C, and then calculate Kb for OCl−.
Kb for piperidine in the appendix C is 7.7⋅10 and Ka for the C5H11NH+ cation is 12.
What is cation?Positively charged ions are known as cations. Negatively charged ions are known as anions. Ions are positively or negatively charged atoms or molecules. A balanced atom will become a positively charged cation if one or more electrons are lost. A cation is an atom or molecule that is positively charged, meaning it contains more protons than electrons. Eg: Na+ 3. An anion is a negatively charged atom or molecule that has more electrons than protons. For example, a ClA cation is an ion that has lost one or more electrons, resulting in a net positive charge. An atom's cation is smaller than the neutral atom because one or more electrons are removed to make it. The following are some examples of cations: Calcium:
Here,
In Appendix C, the Kb for piperidine is 7.710, while the Ka for the C5H11NH+ cation is 12.
To know more about cation,
https://brainly.com/question/17257793
#SPJ4
Place the following in order of increasing molar entropy at 298 K.
CO2 C9H20 CO
A)CO2 < CO < C9H20
B)CO2 < C9H20 < CO
C)CO < CO2 < C9H20
D)C9H20 < CO < CO2
E)C9H20 < CO2 < CO
in order of increasing molar entropy at 298 K is c) CO < CO2 < C9H20.
What is molar entropy?The entropy content of one mole of a pure substance at any temperature of interest and a standard state of pressure is known as the standard molar entropy in chemistry. The standard temperature and pressure are frequently selected to be these. One mole of a sample under standard state conditions is said to have a standard molar entropy, or degree of unpredictability. J/molK, or joules per mole Kelvin, are the typical units of standard molar entropy. Entropy is a unitary measure of the amount of thermal energy in a system that cannot be used to carry out beneficial work. The quantity of entropy is also a gauge of a system's molecular disorder, or unpredictability, as work is produced by organized molecular motion.in order of increasing molar entropy at 298 K is c) CO < CO2 < C9H20.To learn more about molar entropy refer to:
https://brainly.com/question/28383477
#SPJ4
Does the number of valence electrons in each atom change as you move down
each group? If yes, how does the number of valence electrons change? What is the
exception to this rule?
Because a group is established so that each member's valence shell configuration is the same, the number of valence electrons stays constant as we proceed from top to bottom in a group.
Thus, while the valence shell changes, the valence electrons remain the same.
Valence electrons are those that are found in the outermost shell of an isolated atom of an element. Since all of the elements in a group have the same valency, there is no change in the number of valence electrons as an element moves along the group.
Over each interval, the number of valence electrons falls from left to right. Within each group, the number of valence electrons rises from top to bottom. Group 9 elements have nine valence electrons in total. Group 18 contains the elements with the greatest valence electrons.
To learn more about Valence electrons from given link
https://brainly.com/question/371590
#SPJ1
Which of the following isoelectronic (same number of electrons) species is largest in size, C, N+, or O2+?
C
N+
O2+
they are the same size
The isoelectronic species is largest in size is that they are the same size.
Option D is correct.
What are isoelectronic species?Isoelectronic species are described as atoms and ions that have the same number of electrons or can be defined as a pair of species having the same number of electrons combining all the atoms of a particular species is called an isoelectronic pair.
From the given option above, Isoelectronic species are those species which have same number of electrons an each of them has 10 electrons.
Learn more about Isoelectronic species at: https://brainly.com/question/1626090
#SPJ1
You purchase a rare species of plant that acquires oxygen through the solution it is placed in. Knowing that the plant will be kept outside over the scorching summer, what type of solution should the plant be placed in to assure that it receives the greatest amount of oxygen possible?
Plants produce their nourishment through a process called photosynthesis. They generate energy in the shape of glucose using water, carbon dioxide, and sunshine.
What does a high glucose level mean?Because the body doesn't produce enough insulin, hyperglycemia (increased blood glucose) occurs when there is excessive sugar in the blood. Hyperglycemia, a sign of diabetes, can lead to vomiting, intense hunger and thirst, a rapid heartbeat, eyesight issues, and other complaints.
Does glucose lead to weight gain?High blood glucose concentrations can be caused by eating more carbs than what the body can utilize. The reason for this is that the body converts carbohydrate into simple sugars. Ineffective cell removal of carbohydrates from the blood results in the body storing it as fat in the tissues. Weight gain may result from this.
To know more about glucose visit:
https://brainly.com/question/2396657
#SPJ1
write balanced net ionic equation for the first stage of dissociation of the triprotic acid h3po4.
The first stage of dissociation of the triprotic acid H3PO4 would be the dissociation of the first proton, which can be represented by the following balanced net ionic equation: H3PO4 + H2O → H2PO4- + H3O+.
This equation shows that one molecule of H3PO4 dissociates in water to form one molecule of the dihydrogen phosphate ion (H2PO4-) and one hydronium ion (H3O+). The dissociation of the first proton is usually the strongest one among the three protons in H3PO4, this reaction is known as the first stage of dissociation.It is important to note that this is the net ionic equation, which shows only the species that are directly involved in the reaction and not the spectator ions, or ions that are unchanged in the equation.
Learn more about protons here:
https://brainly.com/question/12535409
#SPJ4
Which of the following phenomena is most likely due to the high cohesiveness of water? a) Lakes and rivers freeze from the top down, not the bottom up. b) The fishing spider can walk across the surface of liquid water. c) Adding salt to snow makes it melt. d) The temperature of Santa Monica Bay, off the coast of Los Angeles, fluctuates less than the air temperature throughout the year. e) All of the above are due to the cohesiveness of water.
The fishing spider can walk across the surface of liquid water is most likely due to the high cohesiveness of water.
What is surface of liquid water?Any liquid's surface serves as the interface between it and the surrounding medium. For instance, the top surface of a pond serves as the contact between the air and the water. Surface tension, then, is a feature of the liquid's interface with another medium rather than a property of the liquid itself. Because water molecules are cohesive, surface tension can be described as the quality of a liquid's surface that permits it to resist an external force. Surface tension, which tends to minimize surface area, is the tension of a liquid's surface film brought on by the attraction of the particles in the surface layer to the bulk of the liquid.To learn more about surface refer to:
https://brainly.com/question/26122239
#SPJ4
if the products of a chemical reaction contain less energy that reactants, the reaction must
Exothermic reaction (or exergonic but that is used less often)
C(s) l V2+(aq), V3+(aq) ll VO2+(aq), VO2+(aq) l C(s)
Write the balanced half-reaction for the process that occurs at the anode in acidic solution.
Write the balanced half-reaction for the process that occurs at the cathode in acidic solution.
the balanced half- cell reaction for the process that occurs at the anode in acidic solution: V⁺² + H₂O → VO₂⁺ + 2H⁺ + e⁻
the balanced half- cell reaction for the process that occurs at the cathode in acidic solution: VO₂⁺ + 2H⁺ + e⁻ → V⁺² + H₂O
What is half-cell reaction?The two half-cell reaction in an electrochemical or galvanic cell is encapsulated in a shorthand form known as cell notation. With the cathode cell on the right and the anode cell on the left, these two half-cell reactions are separated by a salt bridge.
The given reaction is shown below:
C(s) l V²⁺(aq.), V³⁺(aq.) ll VO₂⁺(aq.), VO₂⁺(aq.) l C(s)
At the anode, oxidation happens, whereas at the cathode, reduction happens.
Cell notation is used to represent the reaction that is being given. The reaction occurring on the anode is written first in cell notation.
Consequently, the following describes the oxidation process occurring at the anode:
V⁺² + H₂O → VO₂⁺ + 2H⁺ + e⁻
When V undergoes an oxidation half reaction, its oxidation state shifts from +2 to +3, increasing the oxidation number. As a result, the anode is where it happens.
Similar to this, the reduction process at the cathode looks like this.
VO₂⁺ + 2H⁺ + e⁻ → V⁺² + H₂O
The following phase is adding water to balance the oxygen. The hydrogen ion is added to the reactant side in the following step to balance the hydrogen. The final stage involves employing electrons to balance the charge.
To know more about half-cell reaction refer to:
https://brainly.com/question/22946078
#SPJ4
Which one of the following substances does not exist in the indicated solid type? A.graphite–covalent crystals B.Na–metallic crystals C.SiO2–molecular crystals D.NaCl–ionic crystals E.diamond–covalent crystal (Please explain how to do this sort of problem)
C.SiO2–molecular crystals one of the following substances does not exist in the indicated solid type
What kinds of molecular crystals exist?Dry ice (solidified carbon dioxide), solid versions of the noble gases (such as argon, krypton, and xenon), and crystals of several chemical compounds are examples of materials with very weak intermolecular interaction.
Which crystals have covalent bonds?Diamond, silicon, and silicon carbide are examples of hard, usually brittle minerals that form covalent crystals. Each atom of the most basic, monatomic kinds (such as diamond) is surrounded by an amount of atoms equal to its valence.
learn more about molecular crystals
https://brainly.com/question/16616815
#SPJ4