Answer:
The density of the mixture is 0.775 g/cm³
Explanation:
The given parameters are;
The mass of the alcohol, m₁ = 21 g
The density of the alcohol, ρ₁ = 0.7 g/cm³
The mass of the water with which the alcohol is mixed, m₂ = 10 g
The density of wate, ρ₂ = 1.0 g/cm³
The density of a substance is given by the ratio of the mass to the volume of the substance
The density of the mixture, ρ is given as follows;
[tex]\rho = \dfrac{m_1 + m_2}{\dfrac{m_1}{\rho_1} + \dfrac{m_2}{\rho_2} }[/tex]
Therefore;
[tex]\rho = \dfrac{21 + 10}{\dfrac{21}{0.7} + \dfrac{10}{1.0} } = 0.775[/tex]
The density of the mixture, ρ = 0.775 g/cm³.
VI. A student attaches four drawing pins to a copper rod using candle wax as shown in the diagram
The rod is then heated continuously at one end and the pins fall off in the order 4, 3, 2, 1
Explanation:
[tex]C.) \: Conduction \: \\ \\ = > it \: is \: a \: process \: of \: transferring \: \\ \\ of \: heat \: from \: one \: object \: to \: another \\ \\ when \: they \: are \: in \: contact \: [/tex]
By the conduction process the heat reaches the pin.Option C is correct.
What is heat transfer?The term "heat transfer" refers to the movement of heat. The flow of heat across a system's boundary is due to a temperature differential between the system and its surroundings.
Conduction is the type of heat transfer occurs mainly in solid or by contact.In the given condition the rod is then heated continuously at one end and the pins fall off in the order 4, 3, 2, 1.
By the conduction process the heat reaches the pin.
Hence option C is correct.
To learn more about the heat transfer refer to the link;
https://brainly.com/question/13433948
#SPJ2
what is the difference between static electricity produced by friction, conduction of electricity, and induction of an electrical charge?
Answer:
ummm a whole bunch
Explanation:
how do you do question 1?
Answer:
DONT KNOW SORRY XD
Explanation:
BEC I AM BRAINLESS USING BRAINLY
Answer:
Ok, so at point 20 on the x axis you put 12 on the y-axis, then draw a line from 0, 0 to that point, this demonstrates the acceleration to 12 m/s.
Next, calculate the time he cycled for if he suckled the distance of 4800m :
4800/12 = 400 s
Put a dot at 400, 12. The time changed but the speed remained constant, line is horizontal.
For the last one, he had to decelerate at an equal speed. Since there is 100 s left of the journey at that stage, You need to draw a straight line from the previous point to 500, 0. So at time 500 he was not accelerating at all, he came to rest.
a) ?
b) -0.16 meters a second acceleration
The spring in the toy is compressed 0.070 meter by using a downward force of 12.0 newtons. Calculate the spring constant, in N/m, of the spring.
Answer:
The spring constant is 171.43 N/m.
Explanation:
compression in spring, x = 0.07 m
force, F = 12 N
Let the spring constant is K.
Use the formula of the restoring force of the spring
F = K x
12 = K (0.07)
K = 171.43 N/m
The objective of baseball is to OUTSCORE your opponent.
True or false
Help ?
Answer:
True
Explanation:
The team with the most points at the end of the game is the winner.
A 1-m3 tank holds a two-phase liquid-vapor mixture of carbon dioxide at – 17 °C. The quality of the mixture is 70%. For saturated carbon dioxide at – 17 °C, vf = 0.9827×10-3 m3/kg and vg =1.756×10-2 m3/kg. Determine the masses of saturated liquid and saturated vapor, each in kg. What is the percent of the total volume occupied by saturated liquid?
Answer:
a) [tex]m_v= 56.16 Kg[/tex]
[tex]m_l= 14.04 Kg[/tex]
b) [tex]\mu=1.37\%[/tex]
Explanation:
From the question we are told that:
Volume of tank [tex]V_t=1m^3[/tex]
Temperature of [tex]CO_2=-17^oC[/tex]
Quality of the mixture [tex]Q= 70%[/tex]
Specific Volume constants at [tex]-17^oC:[/tex]
[tex]v_f = 0.9827*10^{-3} m3/kg[/tex]
[tex]v_g =1.756*10^{-2} m3/kg.[/tex]
Generally the equation for Specific Volume is mathematically given by
[tex]v = v_f + x (v_g -v_f)[/tex]
[tex]v= (0.9827 * 10^{-3} ) + 0.8 * (17.56 * 10^{-3} -0.9827 * 10^{-3})[/tex]
[tex]v= 0.014244 m3/Kg[/tex]
Generally the equation for Mass is mathematically given by
[tex]m=\frac{v'}{v}[/tex]
[tex]m=\frac{1}{0.014244}[/tex]
[tex]m=70.20 Kg[/tex]
Generally the Mass of saturated Vapor is mathematically given by
[tex]m_v=0.8 * (70.202)[/tex]
[tex]m_v= 56.16 Kg[/tex]
Generally the Mass of saturated Liquid is mathematically given by
[tex]m_l = (70.20 Kg)-(56.16 Kg)[/tex]
[tex]m_l= 14.04 Kg[/tex]
b)
Generally the equation for Volume is mathematically given by
[tex]v_l = m_l x v_f[/tex]
[tex]v_l= (14.04 Kg) (0.9827 x 10{-3} m3/kg)[/tex]
[tex]v_l= 0.01379 m^3[/tex]
Therefore Percentage of liquid
[tex]\mu = \frac{v_l}{v} * 100 \%[/tex]
[tex]\mu= [(0.01379 m^3)/(1 m^3)] *100 \%[/tex]
[tex]\mu=1.37\%[/tex]
Ball X has a mass of 8kg and is moving toward ball Y (which is sitting still) at 2m/s. After they collide, ball X is
sitting still. How fast is ball Y moving after the collision if it has a mass of 4kg?
Answer:
v = 4 m/s
Explanation:
Given :
Ball X :
Mass, m1 = 8kg ;
Initial Velocity, u1 = 2 m/s
Final velocity, v1 = 0
Ball Y:
Mass, m2 = 4kg ;
Initial Velocity, u2 = 0 m/s
Final velocity, v2 = v
(m1u1 + m2u2) = (m2v2 + m1v1)
(8*2 + 4*0) = (4*v + 4*0)
16 + 0 = 4v + 0
16 = 4v
v = 16 / 4
v = 4 m/s
Answer:
Explanation:
This is the Law of Momentum Conservation which for us looks like this:
[tex][m_xv_x+m_yv_y]_b=[m_xv_x+m_yv_y]_a[/tex] and that should look familiar to you if this is what you are doing in physics. Filling in our particular info:
[(8.0 × 2.0)+ (4.0 × 0.0)] = [(8.0 × 0.0) + (4.0v)] and
16 + 0 = 0 + 4.0v and
16 = 4.0v so
v = 4.0 in the direction of ball X
What type of solution is seltzer water?
Answer: Gas-liquid
Explanation:
Seltzer water is also called “sparkling water” or “carbonated water,” and it refers to the water which has been infused with carbon dioxide gas, which then causes it to bubble.
The type of solution that seltzer water is "gas liquid". Here, the solution is liquid while the solute is gas.
Answer:
gas - liquid
Explanation:
i took the quiz
As a sample's temperature increases, which two factors also increase?
A. Particle size
B. Particle boiling point
DC. Particle kinetic energy
D. Particle speed
15. You are watching a baseball game on television that 15
being broadcast from 4500 km away. The batter hits
the ball with a loud "crack" of the bat. A microphone
is located 22 m from the batter, and you are 2.0 m from
the television set. On a day when sound travels 343 m/s
in air, what is the minimum time it takes for you to hear
the crack of the bat after the batter hits the ball?
Answer:
t_total = 6.99 s
Explanation:
It asks us how long it takes to hear the sound, for this we must look for the time (t₁) it takes for the sound to reach the microphone, the time it takes for the video signal (t₂) to reach the television and the time (₃) it takes for the TV sound to reach us, so the total delay time is
t_total = t₁ + t₂ + t₂
we look for t1, it indicates that the distance x = 22m
v = x / t
t = x / v
t₁ = 22/343
t₁ = 6.41 10-2 s
time t₂
t₂ = 4500 103/3 108
t₂ = 1.5 10-5 s
time t₃
t₃ = 2/343
t₃ = 5.83 10⁻³
Total time is
t_total = t₁ + t₂ + t₃
t_total = 6.41 10⁻² + 1.5 10⁻⁵ + 0.583 10⁻²
t_total = 6.99 s
The density of oil is 0.8 g/cm^3. What is the mass of 36 cm^3 of oil? + (1 Point) O 0.29 N O 28.09 28.8 g O 36.89
Answer:
density = mass/volume
density=0.8
volume=36
mass=?
0.8=mass/36
mass = 36x0.8=28.8g
A free-fall parachutist eventually reaches a top speed where air resistance prevents further acceleration. What name is given to this ‘top speed'?
The name given to it is "terminal velocity".
In reality, it isn't a velocity, and it doesn't happen in free-fall.
Go figure.
What is a temperature of 40 K equivalent to in degrees Celsius?
The answer is -233.15° C
-
Explanation:
We know,
0 Kelvin = -273.15° C
So, 40 K = (-273.15+40) = -233.15° C
If my answer helps then please mark me brainliest.
Answer:
-233.15'C
Explanation:
Temperature of substance changes from -20 celsius to 20 celsius. What is temperature change in kelvin scale
Answer:
313kelvin
Explanation:
40 degree celcius plus 273=313K
Three circuits diagrams are shown. Which statement about the circuit diagram is accurate?
Answer:
Circuits A and B are both series circuit.
Explanation:
In series combination, two resistors are connected with their ends to ends. The equivalent resistance in this case is given by :
[tex]R_s=R_1+R_2+...[/tex]
In circuit A both voltage (V) and R₁ are connected in series.
Similarly in circuit B, voltage (V), R₁ and R₂ are in series./
Hence, the correct option is (a).
with respect to air the refractive index of ice is 1.31 and that of rock salt is 1.54 calculate the refractive index of rock salt with respect to ice
Answer:
1.17
Explanation:
Given that,
The refractive index of ice wrt air = 1.31
The refractive index of rock salt wrt air = 1.54
We need to find the refractive index of rock salt with respect to ice.
We know that,
refractive index = (speed of light in air or vaccum)/( speed of light in that medium)
So,
The speed of light in ice = c/(1.31)
The speed of light in rock salt = c/(1.54)
So, the refractive index of rock salt with respect to ice is :
[tex]\mu=\dfrac{1.54}{1.31}\\\\=1.17[/tex]
So, the required refractive index of rock salt wrt ice is 1.17.
Give atleast (5) etypes of cleaning tools , equipment,supplies, and materials that you can find either in your home or school. Identify each use
Answer and Explanation:
Cleaning tools, equipment, supplies, and materials that can be easily found in a school in one each are: scrub brush, sponges, buckets and brooms.
These equipments are essential to promote a clean, organized and safe environment and for this reason, they can be easily found both at school and in a home, since the cleanliness of these two places is essential for the well-being, proactivity and health of the people who attend them.
Explain the effect of the multiplier in the conversion of a moving coil galvanometer to a voltmeter.
Answer:
Explanation:
A galvanometer which is used for the measurement of a very small current can be converted to a voltmeter when it is connected to a high resistance or a multiplier is a series. The purpose of this is to reduce the amount of current that goes through the galvanometer so as prevent full scale deflection.
Explain hydraulic machine as force multiplier.
Answer:
The pressure on piston 1 is always equal to the pressure on piston 2. ... It is equal to the force on piston 1, multiplied by A2/A1. Hydraulic systems are called force multipliers for exactly this reason. A small force can be increased by using hydraulics
Explanation:
Radhe Radhe❤
A young student drops a stone off the side of a cliff that is 41 meters high. How long does it take the stone to hit the ground below?
A)
2.89 s
B)
8.36 s
C)
3.20 s
D)
2.04 s
Which will a positively charged object attract
List two applications of an echo?
Answer:
I think the echo sounds do not depend on the direction of the sound and sound the same as the original sound
Explanation:
An echo is defined as a sound that is produced when a sound wave is reflected back from any hard surface and repeated.
Two major application of echo include:
- Bats, fisherman, and dolphins use echoes to detect or identify any object /obstruction.
- Echo is widely used in medical science applications for imaging of human organs such as echocardiography and ultrasound.
I hope this help you!:)
Atividade 1) A presença do campo magnético terrestre proporciona alguns efeitos interessantes. Dentre eles estão as auroras polares. Faça uma pesquisa e explique como esse fenômeno ocorre. Atividade 2 Utilizando a simulação mostrada na figura abaixo, aproxime o ímã da bússola em várias posições ao longo do plano. a) O que representam as pequenas agulhas ao redor do ímã? b) O que acontece com a agulha da bússola quando o ímã é movimentado ao seu redor? c) Marque a seleção "Mostrar medidor de campo". Movimente o medidor de campo O que você observa em relação ao campo magnético⃗ , quando o medidor de campo se aproxima do imã? c) Marque a caixa de seleção "planeta Terra". Como são mostradas as polaridades do ímã? Por que aparece dessa forma?
Please help me find the answers!
Answer:
1. T₁ is approximately 100.33 N
T₂ is approximately -51.674 N
2. 230°F is 383.15 K
3. Part A
The total torque on the bolt is -4.2 N·m
Part B
Negative anticlockwise
Explanation:
1. The given horizontal force = 86 N
The direction of the given 86 N force = To the left (negative) and along the x-axis
(The magnitude and direction of the 86 N force = -86·i)
The state of the system of forces = In equilibrium
The angle of elevation of the direction of the force T₁ = 31° above the x-axis
The direction of the force T₂ = Downwards, along the y-axis (Perpendicular to the x-axis)
Given that the system is in equilibrium, we have;
At equilibrium, the sum of the horizontal forces = 0
Therefore;
T₁ × cos(31°) - 86 = 0
T₁ = 86/(cos(31°)) ≈ 100.33
T₁ ≈ 100.33 N
Similarly, at equilibrium, the sum of the vertical forces = 0
∴ T₁×sin(31°) + T₂ = 0
Which gives;
100.33 × sin(31°) + T₂ = 0
T₂ = -100.33 × sin(31°) ≈ -51.674
T₂ ≈-51.674 N
2. 230° F to Kelvin
To convert degrees Fahrenheit (°F) to K, we use;
[tex]Degrees \ in \ Kelvin, K = (x^{\circ} F + 459.67) \times \dfrac{5}{9}[/tex]
Pluggining in the given temperature value gives;
[tex]Degrees \ in \ Kelvin, K = (230^{\circ} F + 459.67) \times \dfrac{5}{9} = 383.15[/tex]
230°F = 383.15 K
3. Part A
Torque = Force × perpendicular distance from the line of action of the force
Therefore, the clockwise torque = 9 N × 0.4 m = 3.6 N·m (clocwise)
The anticlockeisre torque = 13 N × 0.6 m = 7.8 N·m (anticlockwise)
The total torque o the bolt = 3.6 N·m - 7.8 N·m = -4.2 N·m (clockwise) = 4.2 N·m anticlockwise
Part B
The torque is negative anticlockwise.
What is meant by the statement that a laser beam is coherent, mono-chromatic and parallel?
Answer:
Laser light however contains only one wavelength. This property makes lasers monochromatic, meaning of one color. Another property of lasers is that all the wavelengths are in phase, meaning they wave together. This property is called coherency. Laser light travels in the same direction, parallel to one another.
The force of friction acting on a sliding crate is 223 N.
How much force must be applied to main- tain a constant velocity?
Answer:
Friction Opposes Motion of an Object.
Now
To get the Net force that Moves an Object and causes acceleration....You subtract the Frictional force
Net force = Pushing Force - Frictional Force
Recall
Net Force; F=Ma
Ma = P - Fr
Now the question asked for How Much force Must be applied to Maintain a Constant velocity.
In a Constant Velocity Motion... Acceleration do not change... Its Zero
So Putting this into the formula above
M(0) = P - Fr
0=P - Fr
Fr = P.
This means
That The force needed to keep this object Moving at Constant Velocity Must be equal to its Frictional Force
Since Frictional Force; Fr =223N
The Applied Force(Pushing Force) Must be equal to 223N too.
A box at rest is in a state of equilibrium half way up on a ramp. The ramp has an incline of 42° . What is the force of static friction acting on the box if box has a gravitational force of 112.1 N ?
70 N
80 N
75 N
85 N
Answer:
the correct answer is 75 N
Explanation:
This is a translational balancing exercise, let's set a reference system with the x-axis in the direction of the plane and the y-axis perpendicular to the plane.
In this reference system the force to decompose is the weight
sin 42 = Wₓ / W
cos 42 = W_y / W
Wₓ = W sin 42
W_y = W cos 42
Wₓ = 112.1 sin 42 = 75.0 N
W_y = 112.1 cos 42 = 83.3 N
The expression for equilibrium on the x-axis is
Wₓ - fr = 0
fr = Wₓ
fr = 75.0 N
the correct answer is 75 N
Which formula is used to find an object's acceleration?
Ο α= Δί - Δν
Ο α= Δv+ Δ
Ο α=Δyl Δί
α= Δ / Δν
Answer:
4 option is correct ........
A series circuit is shown in the diagram below. What is the potential drop
across Rg? (Ry - 200, R2-40 Q, R3-60 , V = 60 V) (Ohrris law: V-IR)
Answer:
Option C. 20 V
Explanation:
We'll begin by calculating the equivalent resistance of the circuit. This can be obtained as follow:
Resistor 1 (R₁) = 20 Ω
Resistor 2 (R₂) = 40 Ω
Resistor 3 (R₃) = 60 Ω
Equivalent Resistance (R) =?
R = R₁ + R₂ + R₃ (series arrangement)
R = 20 + 40 + 60
R = 120 Ω
Next, we shall determine the current in the circuit. This can be obtained as follow:
Voltage (V) = 60 V
Equivalent Resistance (R) = 120 Ω
Current (I) =?
V = IR
60 = I × 120
Divide both side by 120
I = 60 / 120
I = 0.5 A
Finally, we shall determine the potential drop across R₂. This can be obtained as follow:
Current (I) = 0.5 A
Resistor 2 (R₂) = 40 Ω
Voltage (V) =?
V = IR₂
V = 0.5 × 40
V = 20 V
Therefore, the potential drop across R₂ is 20 V
the same crops are grown in different seasons true or false
Answer: False
Explanation:
Growing different crops in different seasons in the same field will deplete the soil of nutrients. False. Growing different crops In the same field actually help to improve the fertility of the field.