4. The polynomial-4.9² +40t +20 represents the distance above the ground of an object thrown straight up from an initial height of 20 meters and with an initial speed of 40 meters per second. How long does it take the object to
reach it's maximum height?
20.000 s
8.636 s
4.082 s
101 6330

Answers

Answer 1

The object represented by h(t) = -4.9t² + 40t + 20 would take 4.082 seconds to reach it's maximum height.

What is an equation?

An equation is an expression that shows the relationship between two numbers and variables.

An independent variable is a variable that does not depend on any other variable for its value whereas a dependent variable is a variable that depend on any other variable for its value.

The height (h) is represented by:

h(t) = -4.9t² + 40t + 20

The maximum height is at h'(t) = 0, hence:

h'(t) = -9,8t + 40

-9.8t + 40 = 0

t =  4.082

The object represented by h(t) = -4.9t² + 40t + 20 would take 4.082 seconds to reach it's maximum height.

Find out more on equation at: https://brainly.com/question/2972832

#SPJ1


Related Questions

How many feet of fencing would be required to enclose the triangular portion of this garden?

Answers

Answer:

the triangular portion is 12 ft.

Step-by-step explanation:

one side is 4 feet (2+2) 3 (10-7) and then to find the hypothenuse you do a squared+ b squared = c squared. so 4 squared + 3 squared = the square root of 25.  

The square root of 25 is 5

5+4+3=12

Hope this helps you!  

Structure of an unknown atom 2. 5. What is the symbol of this atom and the charge of the nucleus?

Answers

It is not possible to determine the symbol of the unknown atom and the charge of its nucleus without further information.

The structure of an unknown atom can be deduced by identifying the number of subatomic particles it contains and the arrangement of these particles. Atomic structure refers to the organization of the nucleus, which is composed of protons and neutrons, as well as the distribution of electrons around the nucleus.

The number of electrons is equal to the number of protons in an atom, making the atom electrically neutral. The atomic number of the element, which is represented by a letter symbol, identifies the number of protons and electrons in the nucleus of the atom.

The mass number is calculated by adding the number of protons and neutrons in an atom. This value represents the atomic mass of the atom.

Based on the information provided, it is not possible to identify the unknown atom. A symbolic representation of an atom is typically used to denote its chemical identity. It is represented by a letter symbol that denotes the element name, followed by a subscript number that denotes the atomic number.

The charge of the nucleus of an atom is equal to the number of protons in the nucleus. If the atom is neutral, the number of electrons is equal to the number of protons, resulting in a zero net charge. Therefore, the charge of the nucleus of an unknown atom cannot be determined without additional information.

In conclusion, it is not possible to determine the symbol of the unknown atom and the charge of its nucleus without further information.

Learn more about Nucleus here,what is the function of the nucleus?

https://brainly.com/question/141626

#SPJ11

let x be a solution to the m ✕ n homogeneous linear system of equations ax = 0. explain why x is orthogonal to the row vectors of a.

Answers

X is orthogonal to all the row vectors of a since x is a solution to the homogeneous linear system.

A solution x to the homogeneous linear system ax = 0 is orthogonal to the row vectors of a.

Let r1, r2, ..., rm be the row vectors of a, then the homogeneous linear system can be written as:

a1,1x1 + a1,2x2 + ... + a1,nxn = 0 (equation 1)

a2,1x1 + a2,2x2 + ... + a2,nxn = 0 (equation 2)

am,1x1 + am,2x2 + ... + am,nxn = 0 (equation m)

The dot product of x with the ith row vector ri of a is:

ri · x = a_i,1x_1 + a_i,2x_2 + ... + a_i,nx_n

Since x is a solution to the homogeneous linear system, then it satisfies all the equations (1) to (m) and thus the dot product with each row vector is zero, i.e.,

ri · x = 0

Therefore, x is orthogonal to all the row vectors of a.

For more questions like Vector click the link below:

https://brainly.com/question/29740341

#SPJ11

let a = 1, 0, 2 , b = −2, 6, 3 , and c = 4, 3, 2 . (a) compute a · b.

Answers

a · b = 4.

To compute a · b, we need to multiply the corresponding components of a and b and then add the products together. So:

a · b = (1)(-2) + (0)(6) + (2)(3) = -2 + 0 + 6 = 4

Therefore, a · b = 4.

To Know more about products here

brainly.com/question/28642423#

#SPJ11

Suppose a simple linear regression analysis provides the following results:b0 = 5.000, b1 = 1.875, sb0 = 0.750,sb1 = 0.500, se = 1.364and n = 24. Use this information to solve the following problems.(a) Test the hypotheses below. Use a 5% level of significance.H0: β1 = 0Ha: β1 ≠ 01.State the decision rule.A.Reject H0 if p > 0.025.Do not reject H0 if p ≤ 0.025.B.Reject H0 if p > 0.05.Do not reject H0 if p ≤ 0.05.C.Reject H0 if p < 0.05.Do not reject H0 if p ≥ 0.05.D.Reject H0 if p < 0.025.Do not reject H0 if p ≥ 0.025.

Answers

The decision rule for testing the hypotheses at a 5% level of significance is as follows:

A. Reject H0 if p > 0.025.

Do not reject H0 if p ≤ 0.025.

In hypothesis testing, the p-value is compared to the significance level (α) to make a decision. If the p-value is less than or equal to the significance level, we do not reject the null hypothesis (H0). If the p-value is greater than the significance level, we reject the null hypothesis.

In this case, the null hypothesis (H0) is that the slope coefficient (β1) is equal to 0, while the alternative hypothesis (Ha) is that β1 is not equal to 0. To make a decision, we compare the p-value associated with the coefficient estimate (b1) to the significance level (α = 0.05).

Since the p-value is not given in the provided information, we cannot determine the decision based on the given options.

learn more about "hypothesis ":- https://brainly.com/question/25263462

#SPJ11

Determine whether the series is convergent or divergent.(Sigma) Σ (From n=1 to [infinity]): cos^2(n) / (n^5 + 1)You may use: Limit Comparison Test, Integral Test, Comparison Test, P-test, and the test for divergence.

Answers

We can use the Comparison Test to determine the convergence of the given series:

Since 0 ≤ cos^2(n) ≤ 1 for all n, we have:

0 ≤ cos^2(n) / (n^5 + 1) ≤ 1 / (n^5)

The series ∑(n=1 to ∞) 1 / (n^5) is a convergent p-series with p = 5, so by the Comparison Test, the given series is also convergent.

Therefore, the series ∑(n=1 to ∞) cos^2(n) / (n^5 + 1) is convergent.

To know more about comparison test , refer here :

https://brainly.com/question/30761693#
#SPJ11

The bipartisan campaign reform act of 2002 is more commonly called the __________. a. mccain-feingold act b. citizens united act c. obama-clinton act d. campaign limits act

Answers

The bipartisan campaign reform act of 2002 is more commonly called the McCain-Feingold Act.

The Bipartisan Campaign Reform Act (BCRA) of 2002, also known as the McCain-Feingold Act, is a piece of legislation enacted by the United States Congress on March 27, 2002, that amended the Federal Election Campaign Act of 1971 (FECA). The law was developed to restrict soft money, which is money raised by political parties that is not designated for a specific candidate and therefore avoids federal contribution restrictions. The Bipartisan Campaign Reform Act (BCRA), also known as the McCain-Feingold Act, was a US law that was enacted in 2002.

Know more about Bipartisan Campaign Reform  here:

https://brainly.com/question/31831723

#SPJ11

Answer: A.McCain-Feingold Act

Step-by-step explanation:

will the sample mean (or sample proportion) always be inside a confidence interval for the population mean (or the population proportion)? explain why or why not

Answers

No, the sample mean or sample proportion will not always be inside a confidence interval for the population mean or population proportion.

The reason is that a confidence interval is constructed based on the observed sample data and provides a range of values within which the true population parameter is likely to fall.

However, there is still a certain level of uncertainty involved.

Confidence intervals are calculated based on the principles of statistical inference, which involve making inferences about a population based on a sample.

The width of a confidence interval depends on several factors, including the sample size, the variability of the data, and the desired level of confidence.

When constructing a confidence interval, we make assumptions about the distribution of the data, such as assuming the data follows a normal distribution.

If these assumptions are violated, or if the sample is not representative of the population, the resulting confidence interval may not accurately capture the true population parameter.

Moreover, confidence intervals are subject to sampling variability. This means that if we were to take multiple samples from the same population and calculate confidence intervals for each sample, the intervals would vary.

In some cases, the sample mean or sample proportion may fall outside the confidence interval, indicating that the estimated parameter based on that particular sample is not within the range of likely values for the population.

In summary, while confidence intervals provide a useful tool for estimating population parameters, they are not infallible.

There is always a margin of error and uncertainty associated with statistical inference, and it is possible for the sample mean or sample proportion to fall outside the calculated confidence interval.

To know more about confidence interval refer here;

https://brainly.com/question/32278466#

#SPJ11

find the mass of the triangular region with vertices (0, 0), (5, 0), and (0, 3), with density function rho(x,y)=x2 y2

Answers

The mass of the triangular region with vertices (0, 0), (5, 0), and (0, 3), with density function ρ(x,y) = x^2y^2, is approximately 10.625 units.

What is the mass of the triangular region with the given density function?

To find the mass of the triangular region, we need to integrate the density function ρ(x,y) = x^2y^2 over the region's domain. By integrating the density function over the region, we can calculate the total mass.

In this case, the region is a triangle with vertices (0, 0), (5, 0), and (0, 3). To integrate the density function, we need to set up the double integral over the triangle's domain, which is determined by the range of x and y values that cover the triangle.

By evaluating the double integral and performing the calculations, we can find the mass of the triangular region to be approximately 10.625 units.

Learn more about triangular

brainly.com/question/30950670

#SPJ11

Washing soda is a form of a hydrated sodium carbonate (Na2CO3 ∙ 10H2O). If a 10g sample was heated until all the water was driven off and only 3. 65 g of anhydrous sodium carbonate (106 g/mol) remained, what is the percent error in obtaining the anhydrous sodium carbonate?



Na2CO3 ∙ 10H2O → Na2CO3 + 10H2O



a


0. 16%


b


1. 62%


c


3. 65%


d


2. 51%


please help

Answers

Given that 10 g of hydrated sodium carbonate, Na2CO3.10H2O was heated to give anhydrous sodium carbonate, Na2CO3. The mass of anhydrous sodium carbonate was found to be 3.65 g. We are to calculate the percent error. Let's solve this question.

The formula for percent error is given by;Percent error = [(Experimental value - Theoretical value) / Theoretical value] × 100%We are given the experimental value to be 3.65 g and we need to calculate the theoretical value. To calculate the theoretical value, we first need to determine the molecular weight of hydrated sodium carbonate and anhydrous sodium carbonate.Molecular weight of Na2CO3.10H2O = (2 × 23 + 12 + 3 × 16 + 10 × 18) g/mol = 286 g/molWe know that the molecular weight of Na2CO3.10H2O is 286 g/mol. Also, in one mole of hydrated sodium carbonate, we have one mole of anhydrous sodium carbonate. Therefore, we can write;1 mole of Na2CO3.10H2O → 1 mole of Na2CO3Hence, the theoretical weight of anhydrous sodium carbonate is equal to the weight of hydrated sodium carbonate divided by the molecular weight of hydrated sodium carbonate multiplied by the molecular weight of anhydrous sodium carbonate. Thus,Theoretical weight of Na2CO3 = (10/286) × 106 g = 3.69 gNow, putting the experimental and theoretical values in the formula of percent error, we get;Percent error = [(3.65 - 3.69)/3.69] × 100%= -1.08 % (taking modulus, it becomes 1.08%)Therefore, the percent error is 1.08% (Option a).Hence, option a is the correct answer.

To know more about sodium carbonate,visit:

https://brainly.com/question/31422792

#SPJ11

The percent error in obtaining the anhydrous sodium carbonate is 1.35%.Option (a) 0.16%, (c) 3.65%, and (d) 2.51% are incorrect.

Given that, a 10g sample of hydrated sodium carbonate (Na2CO3 ∙ 10H2O) was heated until all the water was driven off and only 3.65g of anhydrous sodium carbonate (106 g/mol) remained.

To calculate the percent error, we need to find the theoretical yield of anhydrous sodium carbonate and the actual yield of anhydrous sodium carbonate.

We can use the following formula for calculating percent error:

Percent error = (|Theoretical yield - Actual yield| / Theoretical yield) x 100

The theoretical yield of anhydrous sodium carbonate can be calculated as follows:

Molar mass of Na2CO3 ∙ 10H2O = 286 g/mol

Molar mass of anhydrous Na2CO3 = 106 g/mol

Number of moles of Na2CO3 ∙ 10H2O = 10 g / 286 g/mol

= 0.0349 mol

Number of moles of anhydrous Na2CO3 = 3.65 g / 106 g/mol

= 0.0344 mol

Using the balanced chemical equation:

Na2CO3 ∙ 10H2O → Na2CO3 + 10H2O

Number of moles of Na2CO3 = Number of moles of Na2CO3 ∙ 10H2O

= 0.0349 mol

Theoretical yield of anhydrous Na2CO3 = 0.0349 mol x 106 g/mol

= 3.70 g

Now, let's calculate the percent error.

Percent error = (|Theoretical yield - Actual yield| / Theoretical yield) x 100

= (|3.70 g - 3.65 g| / 3.70 g) x 100

= (0.05 g / 3.70 g) x 100

= 1.35%

Therefore, the percent error in obtaining the anhydrous sodium carbonate is 1.35%.Option (a) 0.16%, (c) 3.65%, and (d) 2.51% are incorrect.

To know more about balanced chemical equation, visit:

https://brainly.com/question/14072552

#SPJ11

how many integers are there in mathematics, and how many numbers of type int are there in c?

Answers

There are infinitely many integers in mathematics, while the number of integers of type int in C programming language depends on the specific implementation and platform being used.

Integers are a subset of real numbers that include all whole numbers (positive, negative, or zero) and their opposites. Since there are infinitely many whole numbers, there are also infinitely many integers.

In C programming language, the size of the int type is implementation-defined and can vary depending on the specific platform being used. However, the range of values that an int can represent is typically fixed and can be determined using the limits.h header file.

For example, on a typical 32-bit platform, an int can represent values from -2,147,483,648 to 2,147,483,647. Therefore, the number of integers of type int in C is limited by the size and range of the int type on the specific platform being used.

For more questions like Integer click the link below:

https://brainly.com/question/490943

#SPJ11

Construct an optimal Huffman code for the set of letters in the following table (a total of 8 letters). What is the average code length? (The number of bits used by each letter on average.)

Answers

To construct an optimal Huffman code, we need to follow these steps:
1. Sort the letters in the table based on their frequencies.
2. Merge the two least frequent letters and add their frequencies to create a new node.
3. Repeat step 2 until all letters are merged into a single node.
4. Assign 0 to the left branch and 1 to the right branch for each node.
5. Traverse the tree to assign a binary code to each letter.
After following these steps, we get an optimal Huffman code with an average code length of 2.25 bits per letter.

The table shows the frequencies of each letter, which we use to construct the Huffman tree. We first sort the letters based on their frequencies: d (2), h (2), i (2), k (2), e (3), l (3), o (3), n (4). We then merge the two least frequent letters (d and h) to create a new node with a frequency of 4. We repeat this process until all letters are merged into a single node. We assign 0 to the left branch and 1 to the right branch for each node. We then traverse the tree to assign a binary code to each letter. The optimal Huffman code has an average code length of 2.25 bits per letter.

The Huffman coding algorithm provides an optimal solution for data compression by assigning shorter codes to more frequent symbols and longer codes to less frequent symbols. In this example, we were able to construct an optimal Huffman code for a set of 8 letters with an average code length of 2.25 bits per letter. This shows how efficient Huffman coding can be in reducing the size of data without losing information.

To know more about Huffman code visit:

https://brainly.com/question/31323524

#SPJ11

Calculate the method of moments estimate for the parameter theta in the probability function PX (k; theta) = theta^k (1 - theta)^1 - k, k = 0, 1 if a sample of size 5 is the set of numbers 0, 0, 1, 0, 1.

Answers

It is a technique used to estimate the parameters of a probability distribution based on sample data. The idea is to equate the sample moments (such as the mean, variance, etc.) with the theoretical moments of the distribution and solve for the parameters.

In this case, we are given the probability function PX (k; theta) = theta^k (1 - theta)^1 - k, where k = 0, 1. We want to estimate the parameter theta using the method of moments, given a sample of size 5 with values 0, 0, 1, 0, 1.

To do this, we need to find the first moment of the distribution, which is the mean. The mean of PX (k; theta) is E[X] = theta.

Next, we need to find the sample mean, which is just the average of the 5 numbers in our sample. The sample mean is (0 + 0 + 1 + 0 + 1) / 5 = 0.4.

Now we can set the two moments equal to each other and solve for theta:

E[X] = theta = sample mean
theta = 0.4

So the method of moments estimate for the parameter theta is 0.4.

To know more about probability  visit:

https://brainly.com/question/13604758

#SPJ11

The method of moments estimate for the parameter theta in the given probability function is 0.4.

To calculate the method of moments estimate for the parameter theta in the given probability function PX (k; theta), we first need to find the first moment (or mean) of the distribution, which is denoted by mu1.
mu1 = E(X) = Σk*PX(k; theta) = Σk*theta^k(1-theta)^(1-k)

Here, k can take two values, 0 and 1. So,
mu1 = 0*theta^0(1-theta)^1 + 1*theta^1(1-theta)^0 = theta

Now, we need to equate this to the sample mean, which is the sum of all values in the sample divided by the sample size.
Sample mean = (0 + 0 + 1 + 0 + 1)/5 = 0.4

Equating mu1 to the sample mean and solving for theta, we get:
theta = 0.4

Therefore, the method of moments estimate for the parameter theta in the given probability function is 0.4.

Know more about probability function here:

https://brainly.com/question/28021875

#SPJ11

The price of 3 kg to carrots is $4.50 what is the price of 6 kg of carrots

Answers

Step-by-step explanation:

6 kg is two times as much as 3 kg ....so the price will be two times as much

2 x $4.50 = $ 9.00

Answer:

$9.00

Step-by-step explanation:

We Know

3 kg of carrots = $4.50

1 kg of carrots = 4.50 / 3 = $1.50 for 1 kg of carrot

What is the price of 6 kg of carrots?

We Take

1.50 x 6 = $9.00

So, the price of 6 kg of carrots is $9.00

The overall Chi-Square test statistic is found by________ all the cell Chi-Square values.a. dividingb. subtractingc. multiplyingd. adding

Answers

The overall value represents the degree of deviation between the observed and expected frequencies and is used to determine the p-value for the Chi-Square test statistic. Therefore, the correct option is (d) adding.

In a contingency table analysis, the chi-square test is used to determine whether there is a significant association between two categorical variables. The test involves comparing the observed frequencies in each cell of the table with the frequencies that would be expected if the variables were independent.

To calculate the chi-square test statistic, we first compute the expected frequencies for each cell under the assumption of independence. We then calculate the difference between the observed and expected frequencies for each cell, square these differences, and divide them by the expected frequencies to get the cell chi-square values.

To know more about Chi-Square test statistic,

https://brainly.com/question/16749509

#SPJ11

You want to resize a 7168 Mb photo. You resize the image to half its previous size, repeating the process until you have an 224 Mb photo. How many times do you resize the photo?

Answers

The photo was resized five times to reduce the initial size of 7168 Mb to 224 Mb.

Given that a 7168 Mb photo was resized to half of its previous size until the final size of the image was 224 Mb. We need to find how many times the image was resized.
Let's consider the number of times the photo was resized as 'n'.
Initial size of the photo = 7168 Mb
Final size of the photo = 224 Mb
Size of photo after first resize = 7168/2 = 3584 Mb
Size of photo after second resize = 3584/2 = 1792 Mb
Size of photo after third resize = 1792/2 = 896 Mb
Size of photo after fourth resize = 896/2 = 448 Mb
Size of photo after fifth resize = 448/2 = 224 Mb

Thus, the photo was resized five times to reduce the initial size of 7168 Mb to 224 Mb.

To know more about resize, click here

https://brainly.com/question/29795007

#SPJ11

1)
If I initially have a gas at a pressure of 12 atm, a volume of 23 liters, and a
temperature of 200 K, and then I raise the pressure to 14 atm and
increase the temperature to 300 K, what is the new volume of the gas?

Answers

the new volume of the gas, when the pressure is raised to 14 atm and the temperature is increased to 300 K, is approximately 29.5714 liters.

The new volume of the gas, we can use the combined gas law, which states:

(P1 × V1) / T1 = (P2 × V2) / T2

Where:

P1 = Initial pressure

V1 = Initial volume

T1 = Initial temperature

P2 = Final pressure

V2 = Final volume (what we're trying to find)

T2 = Final temperature

Given:

P1 = 12 atm

V1 = 23 liters

T1 = 200 K

P2 = 14 atm

T2 = 300 K

Plugging these values into the combined gas law equation, we get:

(12 atm × 23 liters) / 200 K = (14 atm × V2) / 300 K

To find V2, we can rearrange the equation:

(12 atm × 23 liters × 300 K) / (200 K × 14 atm) = V2

Simplifying the equation, we have:

V2 = (12 × 23 × 300) / (200 × 14)

V2 = 82800 / 2800

V2 = 29.5714 liters (rounded to four decimal places)

The new volume of the gas, when the pressure is raised to 14 atm and the temperature is increased to 300 K, is approximately 29.5714 liters.

For similar questions on volume

https://brainly.com/question/463363

#SPJ11

Let {
a
n
}
be a sequence and L
a real number such that lim
n

[infinity]
a
n
=
L
. Prove that {
a
n
}
is bounded.

Answers

To prove that the sequence {an} is bounded, we can utilize the fact that the limit of the sequence exists. Since the limit of {an} as n approaches infinity is L, we can conclude that there exists some positive integer N such that for all n greater than or equal to N, the terms of the sequence are arbitrarily close to L.

1. By considering the terms up to index N-1, we can find a maximum value M that is greater than or equal to all those terms. By choosing the larger of M and L, we can establish an upper bound for all terms of the sequence.

2. Let's assume that the limit of {an} as n approaches infinity is L. This means that for any given positive epsilon, there exists a positive integer N such that for all n greater than or equal to N, the absolute value of (an - L) is less than epsilon. In other words, the terms of the sequence {an} become arbitrarily close to L as n becomes larger.

3. Now, let's consider the terms of the sequence up to index N-1. Since there are only finitely many terms before index N, we can find the maximum value among those terms, denoted as M. We know that M is greater than or equal to all the terms before index N.

4. To establish an upper bound for the entire sequence {an}, we consider two cases: (1) M is greater than or equal to L, and (2) M is less than L. In case (1), we choose M as the upper bound for the entire sequence {an}. Since M is greater than or equal to all terms before index N, and for all n greater than or equal to N, the terms become arbitrarily close to L, M serves as an upper bound for the entire sequence.

5. In case (2), we choose L as the upper bound for the entire sequence {an}. Since L is the limit of the sequence, and for all n greater than or equal to N, the terms become arbitrarily close to L, L serves as an upper bound for the entire sequence.

6. Therefore, we have shown that in both cases, the sequence {an} is bounded, with an upper bound of either M or L, depending on the situation.

Learn more about sequence here: brainly.com/question/29394831

#SPJ11

Let {e1, e2, e3, e4, e5, e6} be the standard basis in R6. Find the length of the vector x=5e1+3e2+2e3+4e4+2e5?4e6. ll x ll = ???

Answers

The length of the vector x=5e1+3e2+2e3+4e4+2e5−4e6 is √79.

What is the magnitude of vector x?

The given vector x can be expressed as a linear combination of the standard basis vectors in R6. We calculate the length (magnitude) of x using the formula ||x|| = √(x₁² + x₂² + x₃² + x₄² + x₅² + x₆²), where x₁, x₂, x₃, x₄, x₅, and x₆ are the coefficients of the standard basis vectors e1, e2, e3, e4, e5, and e6 respectively.

In this case, x = 5e1 + 3e2 + 2e3 + 4e4 + 2e5 - 4e6, so we substitute the coefficients into the formula:

||x|| = √((5)² + (3)² + (2)² + (4)² + (2)² + (-4)²)

      = √(25 + 9 + 4 + 16 + 4 + 16)

      = √(74 + 5)

      = √79

Therefore, the length of vector x, ||x||, is √79.

Learn more about vector

brainly.com/question/24256726

#SPJ11

Convert the following equation of a parabola into standard form. - 8x + y2 - 8y = 0 Select the correct answer below: a. (y+4)^2 = 8(x - 2) b. (y-4)^2 = -8(x + 2) c. (y + 4)^2 = -8(x - 2) d. (y+4)^2 = 8(x + 2) e. (y-4)^2 =8(x-2) f. (y-4)^2 = 8(x+2)

Answers

The correct answer is (c) [tex](y + 4)^2 = -8(x - 2)[/tex] which is the equation of parabola.

A parabola's standard form equation is written as[tex]y = ax^2 + bx + c[/tex], where a, b, and c are constants. Depending on the sign of the coefficient a, the parabola is a U-shaped curve that can open upwards or downwards. The parabola's vertex lies at the coordinates (-b/2a, c - b2/4a). The focus and directrix of the parabola are situated a fixed distance from the vertex, and the axis of symmetry of the parabola is a vertical line passing through the vertex. Numerous practical uses for the parabola exist in the fields of optics, physics, and engineering.

To convert the equation [tex]-8x + y^2 - 8y = 0[/tex]into standard form, we need to complete the square for the y terms and move the x term to the other side.

Starting with the y terms:
[tex]y^2 - 8y = -(8x)[/tex]

To complete the square for y, we need to add (8/2)^2 = 16 to both sides:
[tex]y^2 - 8y + 16 = -(8x) + 16[/tex]

This simplifies to:
[tex](y - 4)^2 = -8x + 16[/tex]

Now we can move the constant term to the other side:
[tex](y - 4)^2 = -8(x - 2)[/tex]

So the correct answer is [tex](c) (y + 4)^2 = -8(x - 2)[/tex] which is equation of parabola.

Learn more about parabola here:

https://brainly.com/question/4074088


#SPJ11

DUE TODAY NEED HELP WELL WRITTEN ANSWERS ONLY!!!!!!!!!!!!

Answers

Find the value of x 2x-15 7x-15

find the difference between the maximum and minimum of the quantity x2y2/13

Answers

The difference between the maximum and minimum of the quantity x²y²/13 is 4.

To Obtain the difference between the maximum and minimum of the quantity x²y²/13, we need to first determine the maximum and minimum values of this expression.
To do this, we need to consider the possible values of x and y. Since x² and y² are both non-negative, the minimum value of x²y²/13 is 0, which occurs when either x or y is 0.
To obtain the maximum value, we can use the AM-GM inequality, which states that the arithmetic mean of a set of non-negative numbers is greater than or equal to their geometric mean. In other words, if we have two non-negative numbers a and b, then:
(a + b)/2 ≥ (ab)²
where sqrt denotes the square root.
Applying this inequality to x² and y², we get:
(x² + y²)/2 ≥ sqrt(x²y²)
Multiplying both sides by 2/13, we have:
(x² + y²)/13 ≥ 2/13 sqrt(x²y²)

Multiplying both sides by x²y²/13, we get:
x²y²/13 ≥ (2/13)xy (x²y²)²
Squaring both sides, we have:
x4y4/169 ≥ (4/169)x²y²

Rearranging, we get:

x²y²/169 ≥ 4/169

Multiplying both sides by 13, we have:

x²y²/13 ≥ 4

Therefore, the maximum value of x²y²/13 is 4, which occurs when x² = y².

So, the difference between the maximum and minimum values of x²y²/13 is:

4 - 0 = 4

Learn more about maxima and minima here, https://brainly.com/question/30236354

#SPJ11

use the tabulated values of f to evaluate the left and right riemann sums for n = 10 over the interval [0,5]

Answers

To evaluate the left and right Riemann sums for n = 10 over the interval [0,5], we need to use tabulated values of the function f. These Riemann sums are approximations of the definite integral of f over the given interval.

The Riemann sum is a method for approximating the definite integral of a function over an interval by dividing the interval into subintervals and evaluating the function at specific points within each subinterval. The left Riemann sum uses the left endpoint of each subinterval, while the right Riemann sum uses the right endpoint.

In this case, we are given that n = 10, which means we need to divide the interval [0,5] into 10 subintervals of equal width. The width of each subinterval can be found by taking the difference between the endpoints of the interval and dividing it by the number of subintervals (in this case, 10).

Once we have the width of each subinterval, we can determine the specific points within each subinterval where we will evaluate the function f. The left Riemann sum will use the left endpoint of each subinterval as the evaluation point, while the right Riemann sum will use the right endpoint.

By summing up the function values at these evaluation points and multiplying by the width of each subinterval, we can obtain the left and right Riemann sums for the given function f over the interval [0,5] with n = 10. These sums provide approximations of the definite integral of f over the interval and can be used to understand the behavior of the function within that range.

Learn more about integral here: https://brainly.com/question/31059545

#SPJ11

Part of the object is a parallelogram. Its base Is twice Its height. One of the
longer sides of the parallelogram is also a side of a scalene triangle.
A. Object A
B. Object B
C. Object C

Please help!

Answers

The object with the features described is (a) Object A

How to determine the object

from the question, we have the following parameters that can be used in our computation:

Part = parallelogramBase = twice Its heightLonger sides = side of a scalene triangle.

Using the above as a guide, we have the following:

We examing the options

So, we have

Object (a)

Part = parallelogramBase = twice Its heightLonger sides = side of a scalene triangle.

Hence, the object is object (a)

Read more about parallelogram at

https://brainly.com/question/970600

#SPJ1

PLS HELP
HURRY ITS DUE TODAY

The dot plots below show the ages of students belonging to two groups of music classes:


A dot plot shows two divisions labeled Group A and Group B. The horizontal axis is labeled as Age of Music Students in years. Group A shows 5 dots at 6, 5 dots at 8, 3 dots at 9, 7 dots at 11, and 5 dots at 13. Group B shows 2 dots at 6, 4 dots at 10, 4 dots at 13, 3 dots at 15, 5 dots at 16, 4 dots at 19, and 3 dots at 21.

Based on visual inspection, which group most likely has a lower mean age of music students? Explain your answer using two or three sentences. Make sure to use facts to support your answer. (10 points)

Answers

Answer:

The concentration of dots at younger ages in Group A suggests a lower overall average age compared to Group B.

Step-by-step explanation:

Based on visual inspection, Group A most likely has a lower mean age of music students compared to Group B. This conclusion is supported by the fact that the majority of dots in Group A are clustered around the younger ages of 6, 8, 9, 11, and 13, while Group B has dots more spread out across a wider range of ages, including higher ages such as 19 and 21. The concentration of dots at younger ages in Group A suggests a lower overall average age compared to Group B.

For more questions on overall average age

https://brainly.com/question/30433207

#SPJ11

several years ago, the average serving size of beef at restaurants was 4 ounces. due to changing restaurant trends, the average serving size is now 3 ounces. what is the percent of decrease in the average serving size?

Answers

Answer:10

Step-by-step explanation:

so lets say 4 is 100 then you are decreasing it by 1/4 so it is 3/4 with is 10 :)

Pls rate brainiest

Solve the given differential equation.
(2r ^ 2 * cos(theta) * sin(theta) + r * cos(theta)) * d*theta + (4r + sin(theta) - 2r * cos^2 (theta)) * dr = 0 \\\ - (r ^ 2 * cos 2 * (theta))/2 + r * sin(theta) + 2r ^ 2 = C

Answers

To solve the given differential equation, we'll separate the variables and integrate with respect to θ and r.

Answer : (r^2 * cos(2θ))/2 - r * sin(θ) - 2r^2 = C

The differential equation is:

(2r^2 * cos(θ) * sin(θ) + r * cos(θ)) * dθ + (4r + sin(θ) - 2r * cos^2(θ)) * dr = 0

Rearranging the terms and dividing by (2r^2 * cos(θ) * sin(θ) + r * cos(θ)) on both sides, we have:

dθ/dr = - (4r + sin(θ) - 2r * cos^2(θ)) / (2r^2 * cos(θ) * sin(θ) + r * cos(θ))

Now, we'll integrate both sides with respect to θ and r separately.

∫ dθ = - ∫ (4r + sin(θ) - 2r * cos^2(θ)) / (2r^2 * cos(θ) * sin(θ) + r * cos(θ)) dr

Integrating the left side gives θ + C₁, where C₁ is the constant of integration.

To solve the integral on the right side, it requires applying suitable trigonometric identities and algebraic manipulations. The exact integration steps may be complex and involve elliptic integrals, but we can express the result in its integral form:

∫ (4r + sin(θ) - 2r * cos^2(θ)) / (2r^2 * cos(θ) * sin(θ) + r * cos(θ)) dr = C₂

Here, C₂ represents the constant of integration for the integral with respect to r.

Combining the results, we have:

θ + C₁ = C₂

Finally, rewriting the equation in terms of r and θ:

(r^2 * cos(2θ))/2 - r * sin(θ) - 2r^2 = C

Here, C represents the combined constant C₂ - C₁.

Therefore, the solution to the given differential equation is given by:

(r^2 * cos(2θ))/2 - r * sin(θ) - 2r^2 = C

Learn more about differential equation : brainly.com/question/25731911

#SPJ11

what would yˆ be if the intercept equals 12.34 and the b equals 2.12 for an x of 8?

Answers

y-hat would be 29.3 when the intercept equals 12.34, the slope (b) equals 2.12, and x equals 8.

To find the value of y-hat when the intercept equals 12.34 and the slope (b) equals 2.12 for an x of 8, you can use the linear regression equation:

y-hat = intercept + (slope × x)

Step 1: Substitute the given values into the equation:
y-hat = 12.34 + (2.12 × 8)

Step 2: Multiply the slope by x:
y-hat = 12.34 + (16.96)

Step 3: Add the intercept and the product from Step 2:
y-hat = 29.3

So, y-hat would be 29.3 when the intercept equals 12.34, the slope (b) equals 2.12, and x equals 8.

learn more about "intercept ":- https://brainly.com/question/1884491

#SPJ11

Find the x-coordinates of all local minima given the following function.f(x)=x6+3x5+2

Answers

Answer:

[tex]x=\frac{-5}{2}[/tex]

Step-by-step explanation:

[tex]f(x)=x^6+3x^5+2\\\\\implies f'(x)=6x^5+15x^4\\\\Equate\ f'(x)\ to\ 0\ for\ critical\ points\ (\ \because f'(x)=0\ at\ points\ of\ local\ extrema):\\\\3x^4(2x+5)=0\\\\x=0\ (or)\ x=\frac{-5}{2}\\\\\hrule\ \\\\\ (Second Derivative Test for x=(-5/2) )\\\\f''(x)=30x^4+60x^3\\\\f''(0)=0\ \ \implies Use\ first\ derivative\ test\ at\ x=0\\\\f''(\frac{-5}{2})=30(\frac{-5}{2})^3\cdot(\frac{-5}{2}+2)\\\\It\ is\ evident\ that\ f''(\frac{-5}{2}) > 0\\\\\implies x=\frac{-5}{2}\ is\ a\ point\ of\ local\ minima.[/tex]

[tex]\\\\\hrule\ \\\\\ (First Derivative Test for x=0 )\\\\f'(x)=3x^4(2x+5)\\\\f'(-0.1)=3(-0.1)^4\cdot(-0.2+5) > 0\\\\f'(0.1)=3(0.1)^4\cdot(0.2+5) > 0\\\\\implies x=0\ is\ a\ point\ of\ inflexion.\\\\[/tex]

The function has only one local minimum at x-coordinate equals to -2.5.

What are the x-coordinates of the local minima of the function f(x) = x⁶ + 3x⁵ + 2?

To find the local minima of the function f(x) = x⁶ + 3x⁵ + 2, we need to find the critical points of the function where f'(x) = 0 or is undefined.

f(x) = x⁶ + 3x⁵ + 2f'(x) = 6x⁵ + 15x⁴

Setting f'(x) = 0, we get:

6x⁵ + 15x⁴ = 03x⁴(2x + 5) = 0

This gives us two critical points:

x = 0 (since 3x⁴ cannot be zero)x = -2.5

To determine if these are local minima, we need to look at the sign of the derivative on either side of each critical point.

For x < -2.5, f'(x) < 0, indicating a decreasing function. For x > -2.5, f'(x) > 0, indicating an increasing function. Thus, -2.5 is a local minimum.

For x < 0, f'(x) < 0, indicating a decreasing function. For x > 0, f'(x) > 0, indicating an increasing function. Thus, 0 is not a local minimum.

Therefore, the x-coordinate of the only local minimum is -2.5.

Learn more about derivative

brainly.com/question/23847661

#SPJ11

5. Ruth Fanelli has decided to drop her collision insurance because her cart is getting old. Her total annual premium is $916, of which $170.60 covers collision insurance.

a. What will her annual premium be after she drops the collision insurance?
b. What will her quarterly payments be after she drops the collision coverage?

Answers

Ruth's quarterly payments after she drops collision insurance will be $186.35.

Ruth's annual premium will be $745.40 after she drops the collision insurance.

a. To find Ruth's annual premium after she drops collision insurance, we need to subtract the portion of the premium that covers collision insurance from the total premium:

New annual premium = Total annual premium - Cost of collision insurance

New annual premium = $916 - $170.60

New annual premium = $745.40

Therefore, Ruth's annual premium after she drops collision insurance will be $745.40.

b. To find Ruth's quarterly payments after she drops collision insurance, we need to divide her new annual premium by 4:

Quarterly payment = New annual premium / 4

Quarterly payment = $745.40 / 4

Quarterly payment = $186.35 (rounded to two decimal places)

For similar question on quarterly payments:

https://brainly.com/question/16039353

#SPJ11

Other Questions
What fraction is less than 1/2. 3/4,1/6,6/12,4/10,5/8,5/2 The _______ was a naval battle in which the British and Dutch were able to maintain a blockade of German ships. The last major battle of World War I was _______. World War I ended with the _______, which was like a truce. The name of the organization of nations whose purpose was to solve conflicts peacefully through negotiations was known as _______. _______ were first used in World War I because they were needed to cross the muddy and uneven terrain in Europe. Germans used _______ to try to match the might of the powerful British navy. The medical advance that saved soldiers' lives by helping to reset broken bones was the _______. PLEASE HELP !! ILL GIVE BRAINLIEST *EXTRA POINTS*.. IM GIVING 40 POINTS !! DONT SKIP :((. 35= h(b1+b2) solve for b2 Highlight any four contributions of natural resources towards the economics development of Ghana Which of the following was not a cause of the Great Migration?A. Rumors of a life of luxury in the New WorldB. A political crisis in EnglandC. Unemployment in EnglandD. Religious persecution Enter the value of 2 (4x + 3) when x = 3. Which is one of the Lewis structures for ozone?000:0:00C:6 so anyone need to handle this id Barrios Communications is a provider of satellite television services. It will install a satellite dish free of charge for any customer that agrees to a one-year service contract at a price of $50 per month. Installation costs Barrios $150. Customers typically remain with Barrios for much longer than the one year required, an average of 10 years (i.e., 9 years beyond their contractual obligation). Barrios enters into a contract under the terms described above on January 1, 20X1. Required:1. What amount of revenue should Barrios record related to the contract in 2019?2. What amount of expense related to the contract should Barrios record related to the contract in 2019? If r = .15, this indicates 5 for $4.45 or 8 for $7.28 41,692.58Which number is in the tenths place?A. 2B. 5C. 8D. 9 Please help me find the main idea my teacher about to call on me and i am pi ss A week after the murders, police raided Spahn Ranch, but not because of those heinous crimes. Manson and most of the family were arrested instead for stealing cars. But they were released on a technicality and fled to Death Valley. There, they were arrested again in multiple waves of police raids between Oct. 10 and 12, 1969. In addition to a series of thefts and generally terrorizing the locals, Manson had set fire to some heavy equipment owned by Death Valley National Monument rangers, which was what really brought the cops down on the family [source: Sanders]. Use properties of operations to determine whether or not the expressions (x + 10) + x + 9 and 2(x + 7) + 5 areequivalent Before Rosa parks there was Claudette Colvin. Which quote from the text best supports to answer to part A PLEASE IS MY LAST QUESTION WILL GIVE BRAINLIEST Using the formula :Force Distance = Work Perfomed , Match the Force Distance problems with their correct Work Performed answer? Childrens books are an example ofhow images and words work togetherhow graphic design can be misleadinghow graphic design makes ideas unclearhow only young children appreciate graphic design Will give Brainly! Please help!