Answer:
5,000
Explanation:
When rounding to the thousands place, you look at the digit in the hundreds place, if the digit is less than 5 you round down. For example if the number was "4,456," we would round to "4,000." But, since the digit in the hundreds place is 7, which is greater than 4, you round up to "5,000."
What happens to the 3 carbons in the krebs cycle.
Answer:
Tthe 3-carbon pyruvate molecule made in glycolysis loses a carbon to produce a new, 2-carbon molecule called acetyl CoA. The carbon that is removed takes two oxygens from pyruvate with it, and exits the body as carbon dioxide (CO 2start subscript, 2, end subscriptt).
Explanation:
explain the factors that affect the separation of mixtures in amino acids
In a star, nuclear fusion occurs in the
A. core
B. radiative zone
C. photosphere
D. corona
Answer:
A. Core
Explanation:
The collisions which occur between the hydrogen atoms starts to heat the gas in the cloud. Once the temperature reaches 15,000,000 degrees Celsius, nuclear fusion takes place in the center, or core, of the cloud. The tremendous heat given off by the nuclear fusion process causes the gas to glow creating a protostar.
In a star, nuclear fusion which is a type of nuclear reaction occurs in the core.
What are nuclear reactions?There are two types of nuclear reactions which are nuclear fusion and nuclear fission .They involve the combination and disintegration of the element's nucleus respectively.
In nuclear fission, the nucleus of the atom is bombarded with electrons of low energy which splits the nucleus in to two parts .Large amount of energy is released in the process.It is used in nuclear power reactors as it produces large amount of energy.
In nuclear fusion,on the other hand, is a reaction which occurs when two or more atoms combine to form a heavy nucleus.Large amount of energy is released in the process which is greater than that of the energy which is released in nuclear fission process.
Learn more about nuclear reactions,here:
https://brainly.com/question/12786977
#SPJ5
For the reaction whose balanced equation is as follows, find how many grams of
zinc phosphate will be produced by the reaction of 5.00 grams of ammonium
phosphate.
3 ZnCla + 2 (NH4)3PO4 → Zn3(PO4)2 + 6 NHACI
Answer:
oxygen
Explanation:
cause thats what we need
Which body systems are responsible to transport materials around and out of the body?
Answer:
Circulatory System
Explanation:
Help me please, I don't get it. Please & thank you, xoxo !
Sorry I accidentally touched it
Refer to the following balanced equation in which ammonia
reacts with nitrogen monoxide to produce nitrogen and
water.
4NH3(g) + 6NO(g) → 5N2(8) + 6H2O(l)
How many moles of NO are required to completely react with
2.45 mol NH3 ?
4NH₃(g) + 6NO(g) → 5N₂(8) + 6H₂O(l)
The mole ratio of NO to NH₃ based on the balanced equation is 6 to 4 (or 3 to 2 in the simplest form)
Therefore in the reaction, there are ³/₂ more moles of NO than NH₃.
⇒ since moles of NH₃ = 2.45 mol
then moles of NO = 2.45 mol × ³/₂
= 3.675 mol
What number should be placed in front of Fe to balance this chemical
equation?
_Fe+302>2Fe2O3
A. 8
B. 2
C. 1
D. 4
the answer is B. 2
because there is 2 iron on the right side so you need another two on the left side to balance it out
what is the maximum concentration of salt in water for an ecosystem to be classified as a freshwater system?
Answer:
The saline water should be from 1000 ppm to 3000 ppm while fresh water is less than 1000 ppm
Is it possible to move the atoms close enough that the nuclei come in contact?
Answer:
I believe not.
Explanation:
From what I have been told atoms can never come into contact beyond the electron barrier.
How many dozens of silver atoms are in the piece of jewelry?.
elements are organized on the periodic table according to
Answer:
atomic number
Explanation:
The periodic table is a table that lists all of the chemical elements in order of atomic number, starting with hydrogen and ending with oganesson. The number of protons in the nucleus of an atom of a certain element is its atomic number.
Have a good day :)
For a constant force, when the surface area is tripled the
.
— Pressure =
force
surface area
pressure is
(a) doubled.
(b) a third as much.
(c) tripled.
(d) unchanged.
I think it is c
because it say tripled
Which one is better!!!!!!!!!????????
Answer:
Both Iron Man and Spider-Man are quite powerful in the comic books, but we think that Spider-Man would be able to defeat Iron Man. Despite his powers, Iron Man is still just a man in a suit, while Spider-Man has actual superpowers and we think they could easily cancel all of Iron Man's advantages
Explanation:
Two chemicals, Z and X react completely to form a product, Y. If 8.7 grams of x react to produce 19.5 grams of Y, how many grams of Z must have reacted to form this much product?
Answer:
Z= 10.8
Explanation:
The simple formula Z + X = Y can solve this problem. Since we are given that,
X= 8.7 GramsY= 19.5 GramsThen we can just substitute the actually values for the letters.
Z + 8.7 = 19.5
From here, we can just do simple math to find the answer.
Z + 8.7 - 8.7 = 19.5 - 8.7
Z = 10.8
So, 10.8 grams of Z reacted to form the product.
Which ingredients are needed to transform nadp to nadph?.
Answer:
according to online:
"Hydrogen ions are transported with the electrons along the chain of reactions. In photosystem I, the electrons are energized, and the energy is stored in molecules of NADP+. During these reactions, the NADP+ molecules are reduced by the addition of electrons. A hydrogen ion is added to NADP+ to form NADPH."
Explanation:
hope this helps!! :)
Can someone help me with this chemistry question?
How many particles or molecules of hydrogen are there in one mole of H2O?
6.022 × 10^23 ×2 = 12.044 × 10^ 23 atoms
Answer:
In one mole of water, there will exist approximately 6.02⋅1023 water molecules. So, there will be a total of 6.02⋅1023⋅2≈1.2⋅1024 hydrogen atoms.
the proton concentrations of three solutions at 25 °c are given. classify the solutions as acidic, basic, or neutral.
This problem is giving information about the proton concentrations of three solutions at 25 °C. Despite they are not numerically given, we can propose three scenarios to see how to approach the question.
Let the following solutions to come up:
[H⁺] = 2.63x10⁻³ M
[H⁺] = 1.00x10⁻⁷ M
[H⁺] = 4.511x10⁻⁹ M
The first step, will be the calculation of the pH for each solution via:
pH = -log([H⁺])
So that they turn out to be:
pH = -log(2.63x10⁻³ M) = 2.580
pH = -log(1.00x10⁻⁷ M) = 7.000
pH = -log(4.511x10⁻⁹ M) = 8.3457
In such a way, since acidic solutions have a pH below 7, neutral have a pH equal to 7 and basic have it above 7, we infer the first one is acidic, second one is neutral and third one is basic.
Thus, you can reproduce this methodology with the proton concentrations you are given.
Learn more:
https://brainly.com/question/23659500https://brainly.com/question/23428840Draw the structure of the product that is formed when the compound shown below is treated with ch3co3h under aqueous acidic conditions.
The structure of the product that is formed is (2R,3S)-hexane-2,3-diol
The missing compound from the given question known as Hex-2-ene is shown with its stick formula in the reactant side of the image attached below.
Alkene reacts with a peracetic acid via the process of epoxidation of alkenes to produce an intermediate known as oxiranes. This intermediate is later being treated with aqueous acid to give a chemical compound with two hydroxyl substituents known as the glycol(diol) family.
Hex-2-ene reacts with peracetic acid CH₃CO₃H.
During the process of the reaction, an oxygen atom is moved from the peracetic acid to the C = C double bond, generating an oxirane ring.
Here;
Peracetic acid is considered to be an electrophilic oxidizing agent because the transferred oxygen atom has a positive charge.
The intermediate (oxirane) is further reacted with aqueous acid to produce an enantiomer of the diol family.
Learn more about the epoxidation of the alkene family.
https://brainly.com/question/9126498
ROUND FINAL ANSWER TO 2 DECIMAL PLACES AND DO NOT INCLUDE A UNIT 675 mL of a gas at a pressure of 1.5atm is compressed to 345 mL. What is the new pressure of the gas?
This problem is providing the initial volume and pressure of a gas as 675 mL and 1.5 atm and then mentions the final volume as 345 mL and asks for the new pressure of the gas.
Thus, we start off this problem by recalling the concept of Boyle's law as an inversely proportional relationship between pressure and volume:
[tex]P_1V_1=P_2V_2[/tex]
In which we solve for the final pressure, [tex]P_2[/tex] as shown below:
[tex]P_2=\frac{P_1V_1}{V_2} \\\\\\P_2=\frac{675mL*1.5atm}{345mL} \\\\\\P_2=2.93atm[/tex]
Considering we had to cancel out the milliliters to obtain atm as units of pressure.
Learn more:
https://brainly.com/question/1437490One of the following is not a property of metals
O a
high malleability
Oь
high compressibility
Os high melting point
Od
high ductility
Answer:
O b
Explanation:
high compressibility is not the property of metal.
The branch of chemistry that deals with the interconversion of electrical and chemical energy is called .
Answer:
Electrochemistry
Explanation:
which pair of elements would most likely form a covalent bond
Answer:
Nonmetals and nonmetals tend to form covalent bonds.
or
P and S
Explanation:
7.
Wh
6
Which Lewis electron-dot diagram is correct for
CO2?
2-m
A :0
B.
:0:0:0
0:0
:
©:
::::C::0
D. 0
:0:0:
XX
Answer:
O=c=o
Explanation:
co2is nonpolar and it has linear molecular shape
PLEASE HELP
According to Newton's law of universal gravitation, how are mass and
gravitational force related?
A. Mass and gravitational force are the same.
B. An increase in mass is a decrease in force.
C. An increase in mass is an increase in force.
O D. Mass and gravitational force are not related.
Answer:
Mass and gravitational for e is not relart
How can you improve your ability to see the indicator color change at the endpoint of a titration?.
Answer: Place a piece of white paper under the analyte flask throughout the titration
Explanation:
The end point of titration can be made easy by the use of indicators. But we have to be keenly observe for each drop from the burette because, the colour change will be sudden for a drop.
What is titration?Titration is an analytical technique used to determine the unknown concentration using a standard reagent of known concentration. The standard reagent of known concentration is called titrant and the one to be determined is called analyte.
Usually analyte is taken in a conical flask and titrant in a burette. The end point of titration is the point at which the reaction is completed in perfect stoichiometry.
In acid-base titrations, the indicators used having different colors in different pH. Hence, the indicator in the analyte will change in color when the acidity of the medium changes. We have to observe keenly for the color change because it happens for any drop.
The adding of titrant from the burette must be dropwise and thus we can get a time to notice the sudden colour change of indicator.
To get more about titration indicators, refer the link below:
https://brainly.com/question/27419598
#SPJ5
what is the main use of charcol
Answer:
Charcoal is produced by the incomplete combustion of plant or animal products. The major use of charcoal is for outdoor cooking. The second largest use of charcoal is in industrial applications in the form of activated charcoal. The activation process involves heating the charcoal subjecting it to steam or treating with a chemical to both remove substances that have adhered to it as well as break it down into finer particles and thus increase the surface area. Activated carbon has been used for its adsorptive properties as a ‘universal antidote’ in cases of poisonings, as a filter aid agent, and in decolorization processes.
Please help me if you can. (I will give branliest to whoever answers first and if they have a reasonable answer.)
Draw the structure of the product that is formed when the compound shown below undergoes a reaction with 1 equivalent of ch3mgi and then is treated with water.
When the compound shown is treated CH3MgI followed by water, 1,3 - cyclohexadienol is formed.
Grignard reagent is an alkylmagnesium halide. Grignard reagents are important synthetic tools in chemistry. They are used to synthesize and number of compounds in the laboratory.
When the Grignard reagent, CH3MgI is reacted with compound shown followed by treatment with water, the product of the reaction is 1,3 - cyclohexadienol whose structure is shown in the second image attached to this answer.
Learn more: https://brainly.com/question/9309478