5) Determine the mass if lithium hydroxide that is produced when 12.87 g of lithium nitride reacts with
an excess of water according to the following process:
Li,N + 3 H2O + 3 LiOH + NH,

Answer:

1.40 atm

Explanation:

P1V1 = P2V2

P2= P1* V1/V2

P1=649.0mmHg

V1= 32.0mL

V2= 19.5mL

P2=649.0mmHg*32.0ml/19.5ml=

1065.03mmHg

To get mmHg to atm. The formula is 1atm/760mmHg

Use the answer you got in mmHg to convert into (atm), If you were asked

1065.03mmHg*(1atm/760mmHg)= 1.40atm

Answer:

In an atom model, the first energy level can hold 2 electrons, the second level can hold 8 electrons, and the third level can hold 18 electrons.

Explanation:

The Electronic Configuration of the elements is the arrangement of all electrons of an element in energy levels and sub-levels (orbitals).  

There are 7 energy levels, numbered from 1 to 7, and in which electrons are distributed, logically in order according to their energy level. Electrons with less energy will be spinning at level 1. Each level is divided into sub-levels. These sub-levels into which each level is divided can be up to 4. These 4 sub-levels are called: s, p, d, f. In the sub-level s there can only be a maximum of 2 electrons, in p there can be a maximum of 6 electrons, in the sub-level d 10 electrons and finally in the sub-level f there can be a maximum of 14 electrons.

In level 1 there is only one sub-level, which will be the s. In level 2 there are 2 sub-levels, the s and the p. At level 3 there are 3 sub-levels s, p and d. And at level 4 there are 4 sub-levels, the s, the p, the d and the f.

Then, in an atom model, the first energy level can hold 2 electrons, the second level can hold 8 electrons, and the third level can hold 18 electrons.

Answer:

a) 1.65 bar

b) 4.2 L

Explanation:

From Boyle's law(since temperature is constant);

P1V1= P2V2

P2 = P1V1/V2

V1 = 110 ml

T1=  33 + 273 =306 K

P1 = 2.4 bar

V2 = 160 ml

T2 = 33 + 273 = 306

P2 =?

P2 = 2.4 * 110/160

P2 = 1.65 bar

2)

T1 = 26.2 + 273 = 299.2 K

V1 = 4L

T2 = 38.1 + 273 = 311.1

V2 =?

From Charles's law;

V1/T1 = V2/T2

V1T2 = V2T1

V2 = V1T2/T1

V2 = 4 * 311.1/299.2

V2 = 4.2 L

Answer: Helium

Explanation: Beryllium (Be) has an electron configuration of 2-2. Losing two electrons will leave it with two electrons in the first shell, resembling Helium.

Answer:

Atomic radius is the distance from the atom's nucleus to the outer edge of the electron cloud. In general, atomic radius decreases across a period and increases down a group. Across a period, effective nuclear charge increases as electron shielding remains constant.

Explanation:

Answer:

Water, a substance composed of the chemical elements hydrogen and oxygen and existing in gaseous, liquid, and solid states. It is one of the most plentiful and essential of compounds. A tasteless and odourless liquid at room temperature, it has the important ability to dissolve many other substances.

Explanation:

Answer/Explanation:

Water is a colorless and tasteless liquid that makes up an organism or body of any sort.

The meaning of the (holy)water is the spirit that flows in each person that will keep their hearts satisfied. Jesus used this term when talking to a Samaritan at a well. Water is also the source of the living water that springs up into eternal life. When talking about this water, Jesus was referring to himself. For His water(blood) had not yet been poured out and it could not yet cleanse (those who believed in him would be gushing out with the living water).

Answer:

I cant see it sorry

Explanation:

Answer:

It covers changes to the position of equilibrium if you change concentration, pressure or temperature. ... If a dynamic equilibrium is disturbed by changing the conditions, the position of equilibrium moves to counteract the change

Explanation:

169.71 minutes

Given

Rate of diffused of Hydrogen=5 gm/30 min

Required

The time required for SO₂

Solution

Graham's law: the rate of effusion of a gas is inversely proportional to the square root of its molar masses or  

the effusion rates of two gases = the square root of the inverse of their molar masses:  

[tex]\tt \dfrac{r_1}{r_2}=\sqrt{\dfrac{M_2}{M_1} }[/tex]

r₁=5gm/30 min

M₁=molar weight of H₂-hydrogen= 2 g/mol

M₂=molar weight of SO₂-sulfur dioxide= 64 g/mol

[tex]\tt \dfrac{5/30}{r_2}=\sqrt{\dfrac{64}{2} }\\\\\dfrac{5/30}{r_2}=4\sqrt{2}\\\\\dfrac{5}{30}=r_2.4\sqrt{2}\\\\r_2=\dfrac{5}{30\times 4\sqrt{2} }=\dfrac{\sqrt{2} }{48}[/tex]

the time required (for the same amount=5 gm) :

[tex]\tt \dfrac{5}{x}=\dfrac{\sqrt{2} }{48}\rightarrow x=120\sqrt{2}=169.71 minute[/tex]

Answer:

meter

have a nice holiday

Answer:

The Meter

Explanation:

In the metric system, the meter is the standard measurement of length.

Hope it helped!

Answer:

D.When the boiling points of the components are different

Explanation:

I believe the formal name for this procedure is actually distillation.

Answer:

The dirty dozen.

Explanation:

This is mainly seen in the control of hazardous waste and its regulations through treaty in the control of persistent organic pollutant(POPs). This regulation is seen to occur in 12 widely used persistent organic pollutants; these are seen to have the ability to absorb and store tissues that make them fatty especially in humans and also animals found in the higher trophic levels or in the food web. That being said, it can be noted that the dirty dozen can move or even attain hundreds, or thousands of levels towards the environ and also in other cases, transporting them through air or water as the case may be.

Answer:

a. 137.93 dm3

b. 150.61 L

Answer:

C₈H₁₈

Explanation:

Answer:

Your answer should be D

Answer: The percent composition of oxygen is 54.5%

Explanation:

Below I have attached my work through, but essentially the percent composition relies on finding the mass of the oxygens and dividing it by the mass of the whole compound. The masses of the elements can be found on the periodic table and added together to get a mass of the whole compound- ascorbic acid. Then, you turn this proportion into a percent by multiplying by 100%.

Answer:

54.5% is the correct answer

Answer:

The Answer is 2.1

Hope this helps!

Answer:

a) The heat energy absorbed to heat the solid is approximately 58.8 kJ

b) The heat required to melt the solid is approximately 3.93 kJ

c) The heat required to heat the liquid is approximately 29.2 kJ

d) The total amount of energy, absorbed in the entire process is approximately 92 kJ

Explanation:

a) The given parameters are;

The mass of the substance = 488.3 grams

The molar mass of the sample = 92.41g/mol

The temperature change of the substance = -23.1°C to 51.8 °C

The heat capacity of the solid substance = 2.96 J/(g·°C)

The heat capacity of the liquid substance = 1.75 J/(g·°C)

ΔHfus = 8.04 kJ/mol

Taking the melting point temperature of the solid as Tfinal = 17.6 °C, we have;

The heat energy absorbed to heat the solid, Q₁ = 488.3 × 2.96 × (17.6 - (-23.1)) = 58826.4776 J ≈ 58.8 kJ

b) The heat required to melt the solid, Q₂ = ΔHfus × m = 8.04 × 488.3 = 3925.932 J ≈ 3.93 kJ

c) The heat required to heat the liquid, Q₃ = Mass × The specific heat capacity of the liquid × The change in temperature

Therefore;

Q₃ = 488.3 × 1.75 × (51.8 - 17.6) = 29224.755 J ≈ 29.2 kJ

d) The total amount of energy, absorbed in the entire process, ΔQ, is given as follows;

ΔQ = Q₁ + Q₂ + Q₃ = 58826.4776 J + 3925.932 J + 29224.755 J = 91,977.1646 J ≈ 92 kJ

Answer:

A ground wire helps those positive charges get to the ground in a safe, direct and controlled way, where they can be discharged without the risk of electrical shock or fire. Shock Absorber Excess electrical charges are common in any home.

Explanation:

:3

Answer:

The three possible structures for octane, C8H18 and give their IUPAC names are -

(structures are attached)

The octane is a hydrocarbon with 8 carbon atoms and 18 hydrogen atoms. The molecular formula of octane is C8H18.

The three possible structures for octane, C8H18 and give their IUPAC names are -

Learn more about:

https://brainly.com/question/1370895

Answer:Hotter objects have a higher average kinetic energy and a higher temperature ; cooler objects have a lower average kinetic energy and a lower temperature.

Explanation:

Answer:

Superscript 235 subscript 92 upper U plus superscript 1 subscript 0 n right arrow superscript 90 subscript 38 upper S r plus superscript 143 subscript 54 upper X e plus 3 superscript 1 subscript 0 n.

Explanation:

B

Answer:

b

Explanation:

got it right on test

a. 1,4332 g

b. 7.54~g

Given

Reaction

MgCl2 (s) + 2 AgNO3 (aq) → Mg(NO3)2 (aq) + 2 AgCl (s)

20 cm of 2.5 mol/dm^3 of MgCl2

20 cm of 2.5 g/dm^3 of MgCl2

Required

the mass of silver chloride - AgCl

Solution

a. mol MgCl2 :

[tex]\tt 20~cm^3=20\times 10^{-3}~dm^3\\\\mol=M\times V\\\\mol=2.5~mol/dm^3\times 20\times 10^{-3}DM^3=0.05[/tex]

From equation, mol AgCl = 2 x mol MgCl2=2 x 0.05=0.1

mass AgCl(MW=143,32 g/mol)= 0.1 x 143,32=1,4332 g

b. mol MgCl2 (MW=95.211 /mol):

[tex]\tt mol=M\times V\\\\mol=\dfrac{2.5~g/dm^3}{95,211 g/mol}=0.0263~mol/dm^3[/tex]

From equation, mol AgCl = 2 x mol MgCl2=2 x 0.0263=0.0526

mass AgCl(MW=143,32 g/mol)= 0.0526 x 143,32=7.54~g

Answer:

It contain double Bond.

Explanation:

To determine weather the bond is double or triple simply check the electron involved in mutual sharing of an electron if 2 electron takes parts it said to be double or if 3 it said to be triple.

Answer:

D. Carbon​.

Explanation:

Carbon can be mixed with Many things. for example, YOU are mostly made out of carbon. Other things include furniture, clothing, plastics, charcoal, pencil led, diamonds, and gas.

Answer:

b                                 xplanation:

ANSWER

An atom of element is electrically neutral because the number of positive protons are equal to number of negative electrons.

Answer:

Although thomson model of atom explained that atoms are electrically neutral, the results of this experiment carried by other scientists couldnot be explained by this model

Answer:

5SiO2 + 2CaC2 = 5Si + 2CaO + 4CO2

Explanation:

balancing equations is a lot of trial and error. My strategy to approaching this equation was to get the O's balanced. After trying several combonations I found that I needed 10 O's on each side of the equation for the other elements to match up. After I balanced the O's, I balanced my C's to 4 on each side. Then I balanced my Ca's to have 2 on each side. And last but not least I balanced my Si to have 5 on each side.