(5pts) Amount of cyclohexane collected in grams (5pts) Amount of toluene collected in grams (15pts) Post Lab Questions (15pts) What is the percentage by mass of cyclohexane in the mixture? Activity closes on Thursday 12/09/2021 11:59PM(CST) Data And Report Submission - Separation By Distillation (5pts) Separation by Distillation Are you completing this experiment online? Yes Data Entry 3.37 80.42 82.78 Enter the volume of the solution in mL Vapor temperature when distillation of cyclohexane started (°C) Vapor temperature when distillation of cyclohexane finished (°C) Volume of cyclohexane collected in mL Vapor temperature when distillation of toluene started (°C) Vapor temperature when distillation of toluene finished (°C) Volume of toluene collected in mL 1.83 110.98 112.13 1.54 (10pts) Calculations (5pts) Amount of cyclohexane collected in grams (5pts) Amount of toluene collected in grams (15pts) Post Lab Questions (15pts) What is the percentage by mass of cyclohexane in the mixture?

Answers

Answer 1

The percentage by mass of cyclohexane in the mixture is 2.00%.

To calculate the amount of cyclohexane collected in grams, we need to use the density of cyclohexane, which is 0.7781 g/mL at room temperature. From the data table, we can see that 1.83 mL of cyclohexane was collected. So, the mass of cyclohexane collected is:
Mass of cyclohexane = Volume of cyclohexane x Density of cyclohexane
Mass of cyclohexane = 1.83 mL x 0.7781 g/mL
Mass of cyclohexane = 1.4261 g

To calculate the amount of toluene collected in grams, we use the same formula with the density of toluene, which is 0.8669 g/mL at room temperature. From the data table, we can see that 80.42 mL of toluene was collected. So, the mass of toluene collected is:
Mass of toluene = Volume of toluene x Density of toluene
Mass of toluene = 80.42 mL x 0.8669 g/mL
Mass of toluene = 69.73 g

The percentage by mass of cyclohexane in the mixture can be calculated using the following formula:
% mass of cyclohexane = (Mass of cyclohexane / Mass of mixture) x 100%
Mass of mixture = Mass of cyclohexane + Mass of toluene
Mass of mixture = 1.4261 g + 69.73 g
Mass of mixture = 71.1561 g

% mass of cyclohexane = (1.4261 g / 71.1561 g) x 100%
% mass of cyclohexane = 2.00%

To know more about cyclohexane visit:

https://brainly.com/question/30230108

#SPJ11


Related Questions

How many molecules of H₂O are
equivalent to 97.2 g H₂O?
(H = 1.008 g/mol, O = 16.00 g/mol)
[?]
[?]x10 molecules
Enter your answer with the correct number of
significant figures and be sure the prefix is a number
between 1 and 10!
dro's Number = 6.02 x 1023 molecules/mole

Answers

Answer:

3.25 x 10²⁴ molecules H₂O

Explanation:

To find the number of H₂O molecules, you need to (1) convert grams to moles (via molar mass) and then (2) convert moles to molecules (via Avogadro's Number). It is important to arrange the ratios/conversions in a way that allows for the cancellation of units. The final answer should have 3 sig figs to match the amount of sig figs in the given value.

Atomic Mass (H): 1.008 g/mol

Atomic Mass (O): 16.00 g/mol

Molar Mass (H₂O): 2(1.008 g/mol) + 16.00 g/mol

Molar Mass (H₂O): 18.016 g/mol

Avogadro's Number:

6.02 x 10²³ molecules = 1 mole

97.2 g H₂O            1 mole              6.02 x 10²³ molecules
------------------  x  -------------------  x  ------------------------------------  =
                              18.016 g                      1 mole

=  3.25 x 10²⁴ molecules H₂O

Calculate the pH of a buffer solution prepared by mixing 75.0 mL of 1.00 M lactic acid and 25.0 mL of 0.50 M sodium lactate.

Answers

From the calculations, the pH of the buffer is 3.1.

What is the pH of the buffer solution?

The  Henderson-Hasselbach equation comes in handy when we deal with the pH of a buffer solution. From that equation;

pH = pKa + log[(salt/acid]

Amount of the salt = 25/1000 *  0.50 M = 0.0125 moles

Amount of the acid = 75/1000 *  1.00 M = 0.075 moles

Total volume = ( 25 + 75)/1000 = 0.1 L

Molarity of salt = 0.0125 moles/0.1 L = 0.125 M

Molarity of the acid = 0.075 moles/0.1 L = 0.75 M

Given that the pKa of lactic acid is 3.86

pH = 3.86 + log( 0.125/0.75)

pH = 3.1

Learn more about pH:https://brainly.com/question/5102027

#SPJ1

A saturated solution of baso4 has a concentration of 0.5mol/l. a 55ml sample is taken by you. what is the mass of baso4 in the solution

Answers

Answer:

6.4 g BaSO₄

Explanation:

You have been given the molarity and the volume of the solution. To find the mass of the solution, you need to (1) find the moles BaSO₄ (via the molarity ratio) and then (2) convert moles BaSO₄ to grams BaSO₄ (via the molar mass). It is important to arrange the conversions in a way that allows for the cancellation of units (the desired unit should be in the numerator). The final answer should have 2 sig figs to reflect the sig figs of the given values.

Molarity (mol/L) = moles / volume (L)

(Step 1)

55 mL / 1,000 = 0.055 L

Molarity = moles / volume                             <----- Molarity ratio

0.5 (mol/L) = moles / 0.055 L                        <----- Insert values

0.0275 = moles                                             <----- Multiply both sides by 0.055

(Step 2)

Molar Mass (BaSO₄): 137.33 g/mol + 32.065 g/mol + 4(15.998 g/mol)

Molar Mass (BaSO₄): 233.387 g/mol

0.0275 moles BaSO₄          233.387 g
---------------------------------  x  -------------------  =  6.4 g BaSO₄
                                                1 mole

Which equation agrees with the ideal gas law?
StartFraction V subscript 1 over T subscript 1 EndFraction equals StartFraction V subscript 2 over T subscript 2 EndFraction.
V subscript 1 n subscript 1 equals V subscript 2 n subscript 2.
P subscript 1 n subscript 1 equals P subscript 2 n subscript 2.
StartFraction P subscript 1 over P subscript 2 EndFraction equals StartFraction T subscript 2 over T subscript 1.

Answers

The equation that agrees with the ideal gas law is as follows: StartFraction V subscript 1 over T subscript 1 EndFraction equals StartFraction V subscript 2 over T subscript 2 EndFraction (option A).

What is ideal gas law?

Ideal gas law in physics is the equation of state of an ideal gas, which is a gas whose molecules do not interact or collide.

The equation of the ideal gas law is as follows:

PV = nRT

This equation shows that the volume is directly proportional to the volume of the gas.

Therefore, the equation that agrees with the ideal gas law is as follows: StartFraction V subscript 1 over T subscript 1 EndFraction equals StartFraction V subscript 2 over T subscript 2 EndFraction.

Learn more about ideal gas law at: https://brainly.com/question/13821925

#SPJ1

option A, v1/t1 = v2/t2

A steel cylinder contains a mixture of nitrogen, oxygen, and carbon dioxide gases. The total pressure in the tank is 2710 torr. The pressure exerted by the nitrogen and oxygen is 930 and 850 torr, respectively. What is the partial pressure in torr of the carbon dioxide in the mixture

Answers

A steel cylinder contains a mixture of nitrogen, oxygen, and carbon dioxide gases. The total pressure in the tank is 2710 torr. The pressure exerted by the nitrogen and oxygen is 930 and 850 torr, respectively.  27.1 torr is the partial pressure of the carbon dioxide in the mixture.

What is Dalton's Law of Partial Pressure ?

Dalton's Law of partial pressure states that the total pressure exerted by non reacting gaseous mixture at a constant temperature and given volume is equal to the sum of partial pressure of all gases.

It is expressed as:

[tex]P_{A} = X_{A} P_{T}[/tex]

where,

[tex]P_{A}[/tex] = Partial pressure of gas A

[tex]X_{A}[/tex] = Mole fraction of gas A

[tex]P_{T}[/tex] = Total pressure

Mole Fraction of Nitrogen

= [tex]\frac{930}{930 + 850}[/tex]

= 0.52

Mole Fraction of Oxygen

= [tex]\frac{850}{850 + 930}[/tex]

= 0.47

Now,

Mole fraction of nitrogen + Mole fraction of oxygen + Mole fraction of carbon dioxide = 1

⇒ 0.52 + 0.47 + Mole fraction of carbon dioxide = 1

⇒ 0.99 + Mole fraction of carbon dioxide = 1

⇒ Mole fraction of carbon dioxide = 1 - 0.99

⇒ Mole fraction of carbon dioxide = 0.01

Now put the value in above expression we get

[tex]P_{A} = X_{A} P_{T}[/tex]

     = 0.01 × 2710

     = 27.1 torr

Thus from the above conclusion we can say that A steel cylinder contains a mixture of nitrogen, oxygen, and carbon dioxide gases. The total pressure in the tank is 2710 torr. The pressure exerted by the nitrogen and oxygen is 930 and 850 torr, respectively.  27.1 torr is the partial pressure of the carbon dioxide in the mixture.

Learn more about the Dalton's Law here: https://brainly.com/question/14119417

#SPJ4

Calculate the molar mass of powdered fruit drink mix, made from sucrose (c12h22o11). appreciate it.

Answers

molar mass of sucrose is 342 g/mol.

Concept:

It is the substance's molecular mass. M is the abbreviation for it, and g/mol is the standard unit for measuring molar mass.

Given:

Sucrose (C12H22O11)

Find:

Calculate the molar mass of the powdered fruit drink mix, made from sucrose (C12H22O11).

Solution:

The molar mass of carbon = 12 g/mol

The molar mass of hydrogen = 1 g/mol

The molar mass of oxygen = 16 g/mol

Thus, the molar mass of sucrose can be calculated as:

C12H22O11 12 C + 22 H + 11 O

= 12 12 g/mol + 22 * 1 g/mol + 11 * 16 g/mol

= 144 g/mol + 22 g/mol + 176 g/mol = 342 g/mol

Therefore, the molar mass of sucrose is 342 g/mol.

Hence, the molar mass of the powdered fruit drink mix, made from sucrose

Hence, the molar mass of the powdered fruit drink mix, made from sucrose(C12H22O11) is 342 g/mol.

Learn more about Molar mass here:

https://brainly.com/question/24236159

#SPJ4

Need this answered ASAP

Answers

The concentration of the final solution will be 0.2886 M.

Molar concentration

50.6 g of NaCl is dissolved in 600 mL of water.

Mole of 50.6 g NaCl = 50.6/58.44 = 0.8658 mol

Molar concentration of the oiriginal solution = 0.8658/06 = 1.4431 M

25 mL of 1.4431 M of the solution is diluted up to the 125 mL mark.

m1 = 1.4431, v1 = 25 ml, v2 = 125 mL

m2 = m1v1/v2 = 1.4431 x 25/125 = 0.2886 M

The concentration of the final solution will be 0.2886 M

More on molar concentration can be found here: https://brainly.com/question/15532279

#SPJ1

The density of ethanol, C2H5OH, is 0.789 g/mL. How many milliliters of ethanol are needed to produce 15.0 g of CO2 via a combustion reaction

Answers

The answer is 9.94 ml.

What is density?Density is a word we use to describe how much space an object or substance takes up (its volume) in relation to the amount of matter in that object or substance (its mass). Another way to put it is that density is the amount of mass per unit of volume. If an object is heavy and compact, it has a high density.

Given,

        The density of ethanol, C2H5OH = 0.789 g/mL

[tex]n (CO_{2} ) = \frac{m}{M} = \frac{15G}{44 g/mol} } = 0.341 mol;[/tex]

[tex]n ( C_{2} H_{2} OH) = \frac{n (CO_{2}) }{2} = \frac{0.341}{2} = 0.1705 mol;[/tex]

[tex]m (C_{2} H_{2} OH) = 0.1705 mol * 46 g/ mol[/tex] = 7.843 g

[tex]V (C_{2} H_{2} OH ) = \frac{7.843}{0.789} = 9.94 ml.[/tex]

Therefore, the answer is 9.94 ml

Learn more about density of ethanol,

brainly.com/question/18597444

#SPJ4

The complete question is -

If the density of ethanol, C2H5OH, is 0.789 g/mL. How many milliliters of ethanol are needed to produce 15.0 g of CO2 according to the following chemical equation?

C2H5OH(l) + 3 O2(g) → 2 CO2(g) + 3 H2O(l)

1. Determine the amount concentration of calcium ions and acetate ions in a 0.80 mol/L
solution of calcium acetate (work out formula first).

Answers

Since there is one mole of Ca^2+ in calcium acetate, its concentration is 0.80 mol/L.

What is concentration?

The term concentration has to do with the amount of substance in solution. The concentration can be measured in several units. Generally, concentration is expressed in molarity, molality, mass concentration units or percentage.

Now we are asked to find the amount concentration of calcium ions and acetate ions in a 0.80 mol/L solution of calcium acetate. The formula of calcium acetate is Ca(CH3COO)2.

Thus;

Ca(CH3COO)2(aq)  ----> Ca^2+(aq) + 2CH3COO^-(aq)

It then follows that since there is one mole of Ca^2+ in calcium acetate, its concentration is 0.80 mol/L.

Learn more about concentration:https://brainly.com/question/10725862

#SPJ1

Which diagram is the correct electron dot diagram for magnesium?



A.
A symbol of magnesium M g has four dots representing four free electrons.

B.
A symbol of magnesium M g has three dots representing three free electrons.

C.
A symbol of magnesium M g has one dot representing one free electron.

D.
A symbol of magnesium M g has two dots representing two free electrons.

Answers

Answer:

D.) A symbol of magnesium Mg has two dots representing two free electrons.

Explanation:

Magnesium is located in the second group (column) of the periodic table. Elements located here have 2 valence electrons in their outermost shell. Thus, the electron dot diagram of magnesium has 2 dots symbolizing the 2 valence electrons.

Which models of the atom from task 1 are not supported by rutherfords experimental evidence?

Answers

Model not supported is:

Thomson's atomic model of the atom from task 1 are not supported by Rutherford's experimental evidence.

Experiments given by Thomson, Rutherford & Dalton:

The cathode ray tube experiments of J.J. Thomson demonstrated that all atoms contain minute, electron-like subatomic particles that are negatively charged.The plum pudding model of the atom was put up by Thomson and featured negatively charged electrons embedded within a positively charged "soup."The majority of an atom is empty space, with a small, dense, positively-charged nucleus, as demonstrated by Rutherford's gold foil experiment.Rutherford postulated the nuclear model of the atom in light of these findings.Atoms, in Dalton's opinion, are the tiniest pieces of matter that can never be further divided. This belief persisted up until the time it was learned that the atom was made up of subatomic particles.

Dalton and Thomson's concepts are in conflict with the experimental findings of Rutherford. Dalton's model is unsupported by evidence because it does not include electrons, protons, or neutrons.

Learn more about atomic model here,

https://brainly.com/question/27990920

#SPJ4

These two images have different chemical change words and definitions,
Can someone please help me match the word from its meaning?
Thank you!

Answers

Answer:

(1) Acid -------------------------------------> (G) When dissolved in water, its solution has a pH value less than 7. Acids are proton (H⁺ ion) donors.

(2) Alkali -----------------------------------> (E) The oxide, hydroxide, or carbonate of a metal that will react with an acid, forming a salt as one of the products (if a base dissolves in water it is called an alkali. Bases are proton (H⁺ ion) acceptors.

(3) Base ------------------------------------> (I) Its solution has a pH value of more than 7.

(4) Blast furnace ------------------------> (C) The huge reaction vessels used in industry to extract iron from its ore.

(5) Displacement reaction ----------> (R) A reaction in which a more reactive element takes the place of a less reactive element in one of its compounds or in solution.

(6) Mole -----------------------------------> (A) A very large number that is the amount of substance in the relative atomic or formula mass of a substance.

(7) Neutral -------------------------------> (J) A solution with a pH value of 7 which is neither acidic nor alkaline. Alternatively, something that carries no overall charge.

(8) Neutralization ----------------------> (F) The chemical reaction of an acid with a base in which a salt and water are formed. If the base is a carbonate of hydrogen carbonate, carbon dioxide is also produced in the reaction.

(9) Ore -------------------------------------> (P) Ore is rock which contains enough metal to make it economically worthwhile to extract the metal.

(10) Oxidation --------------------------> (B) A reaction where oxygen is added to a substance / or when electrons are lost from a substance.

(11) pH -------------------------------------> (O) A number which shows how strongly acidic or alkaline a solution is.

(12) Pipette ------------------------------> (N) A glass tube used to measure accurate volumes of liquids.

(13) Precipitate -------------------------> (K) An insoluble solid formed by a reaction taking place in solution.

(14) Reactant ---------------------------> (M) A substance we start with before a chemical reaction takes place.

(15) Reduction -------------------------> (S) A reaction in which oxygen is removed or electrons are gained.

(16) Salt ----------------------------------> (Q) A salt is a compound formed when some or all of the hydrogen in an acid is replaced by a metal.

(17) Strong acids ---------------------> (L) These acids completely ionize in solution and have a high concentration of H⁺ (aq) ions in solution.

(18) Universal indicator ------------> (H) A mixture of indicators that can change through a range of colors to show how strongly acidic or alkaline liquids and solutions are.

(19) Weak acids ---------------------->  (D) Acids that do not ionize completely in aqueous solutions.

What is the molality of a solution prepared by dissolving 2.00 ml of bromine (d = 3.105 g/ml) in 125 ml of acetic acid, hc2h3o2 (d = 1.05 g/ml) (ans. 0.30 m)?

Answers

The molality of a solution is 0.304g

Calculation,

Given data,

Volume of bromine = 2 mldensity of bromine = 3.105 g/ml Volume of acetic acid = 125 mldensity of of acetic acid = 1.05 g/ml

Density of bromine = 3.105 g/ml  = mass / volume = mass / 2 ml

Mass of bromine = 3.105 g/ml ×  2 ml = 6.206 g

Density of acetic acid = 1.05 g/ml = mass / volume = mass / 125 ml

Mass of bromine = 1.05 g/ml ×  125 ml = 127.5 g

Molality = mass of solute in gram/molar mass of solute × 1000/mass of solvent in gram

Molality = 6.206 g/159.88 g/mol × 1000/127.5 g = 0.304 g

learn about Molality

https://brainly.com/question/20366625

#SPJ4

Which of the following results in an increase in the entropy? (4 points)
Freezing water
Cooling a solid
Condensing water vapor
Dissolving sugar in water

Answers

Dissolving sugar in water results in an increase in the entropy.

Hence, Option (D) is correct answer.

What is Entropy ?

Measurement of randomness of a system is called entropy. It is an extensive property. It is a state function. Unit of entropy is JK⁻¹ mol⁻¹.

Now lets check all options one by one

Option (A): Freezing water

Freezing water decreases the entropy because here second law of thermodynamics does not violate.

So it is incorrect option

Option (B): Cooling water

Cooling water does not increases entropy because entropy increases when solid melts to give liquid.

So it is incorrect option

Option (C): Condensing water vapour

In Condensing water vapour the temperature of liquid phase decreases and thus kinetic energy decreases. The randomness will decrease and hence entropy will also decrease.

So it is incorrect option.

Option (D): Dissolving sugar in solute

In dissolving sugar in solute the solid dissociates to ions and  the randomness will increase and hence entropy will also increase.

So it is correct option

Thus from the above conclusion we can say that Dissolving sugar in water results in an increase in the entropy.

Hence, Option (D) is correct answer.

Learn more about the Entropy here: https://brainly.com/question/1477087

#SPJ1

Other than reducing greenhouse gas emissions, why would an entity switch to an alternative energy solution

Answers

Answer:

renewable energy sources such as solar and wind DONT emit carbon dioxide and other greenhouse gases that contribute to global warming

Explanation:

One of the product chemicals is aluminum chloride, which is an eye and skin irritant that can cause chemical burns. What will prevent you from coming into contact with this hazard

Answers

One of the product chemicals is aluminum chloride, which is an eye and skin irritant that can cause chemical burns. Wear safety glasses, Avoid contact with water or moisture and Avoid dust formation will prevent you from coming into contact with this hazard.

What is Aluminum Chloride ?

Aluminum chloride is also called Aluminum trichloride. The formula of Aluminum chloride is AlCl₃. Aluminum chloride is a poor conductor of electricity in molten state. It is a powerful Lewis acid. It has very low melting point and boiling point.  

What will prevent you from coming into contact with this hazard ?

To prevent from this hazard follows these rules:

Wear safety glassesWear Impervious gloves Avoid contact with water or moisture. Avoid dust formation

Thus from the above conclusion we can say that One of the product chemicals is aluminum chloride, which is an eye and skin irritant that can cause chemical burns. Wear safety glasses, Avoid contact with water or moisture and Avoid dust formation will prevent you from coming into contact with this hazard.

Learn more about the Aluminum Chloride here: https://brainly.com/question/6061451

#SPJ4

how many moles are in 2.00g of H2O​

Answers

n = m/M = 2/18 = 1/9 ~0,1 mol

Answer:

.111 mole    (using 3 significant digits)

Explanation:

Mole weight of H2O  = 2 x 1.008  + 15.999 = 18.015 gm/mole

2 gm / 18.015 gm/mole = .111 mole

The emission spectrum of sodium is shown below. What do the two bright
yellow vertical lines in the spectrum show about sodium atoms?

Answers

The two lines show that these are the only two lines  that do not cause energy transition in the sodium atom. Option D

What are the two lines in the spectrum of sodium atom?

The spectrum of the sodium atom appears as a doublet. This implies that there are two lines in the spectrum and they appear as bright yellow lines that are not spaced apart in the spectrum.

The  two bright yellow vertical lines in the spectrum shows that these are the only two lines  that do not cause energy transition in the sodium atom.

Learn more about spectrum of sodium atom:https://brainly.com/question/27991355

#SPJ1

A sample of 0.400 moles of nitrogen occupies 0.800 L. Under the same conditions, what number of moles occupies 1.200 L

Answers

Taking into account the Avogadro's Law, 0.600 moles occupies 1.200 L.

Avogadro's Law

Avogadro's Law is a gas law that relates the volume and amount of gas at constant pressure and temperature.

Avogadro's law states that volume is directly proportional to the amount of gas: increasing the amount of gas will increase the volume, while decreasing the amount of gas will decrease the volume.

Mathematically, this law states that the ratio between the volume and the amount of gas is constant:

[tex]\frac{V}{n} =k[/tex]

Assuming that there is a certain amount of gas n1 that occupies a volume V1 at the beginning of the experiment, by varying the amount of gas to a new value n2, then the volume will change to V2, and the following is true:

[tex]\frac{V1}{n1} =\frac{V2}{n2}[/tex]

Amount of moles in this case

In this case, you know:

V1=0.800 Ln1= 0.400 molesV2= 1.200 Ln2= ?

Replacing in Avogadro's Law:

[tex]\frac{0.800 L}{0.400 moles} =\frac{1.200 L}{n2}[/tex]

Solving:

[tex]n2x\frac{0.800 L}{0.400 moles} =1.200 L[/tex]

[tex]n2=\frac{1.200 L}{\frac{0.800 L}{0.400 moles} }[/tex]

n2= 0.600 moles

Finally, 0.600 moles occupies 1.200 L.

Learn more about Avogadro's Law:

brainly.com/question/4147359

#SPJ1

a plant cell has a solute potential of -2.0 bars and pressure potential of 0.0. what is its water potential? show your work if it is placed in a solution with a water potential of -1.0 what will happen to this plant cell

Answers

A plant cell has a solute potential of -2.0 bars and pressure potential of 0.0. Its water potential is -2 bar. The cell will gain water or swell.

What is Water Potential ?

Water Potential is the potential energy of water in a system per unit volume relative to pure water , when both pressure and temperature are kept same. Water potential is never positive. It is expressed in kPa (Kilopascals). The symbol of water potential is ψ.

How to find the Water Potential ?

To find the water potential use this formula

[tex]\Psi = \Psi_{s} + \Psi_{p}[/tex]

where,

ψ = Water Potential

[tex]\Psi_{s}[/tex] = Solute Potential

[tex]\Psi_{p}[/tex] = Pressure potential

Now put the value in above expression we get

[tex]\Psi = \Psi_{s} + \Psi_{p}[/tex]

   = -2.0 + 0.0

   = - 2 bar

Thus from the above conclusion we can say that A plant cell has a solute potential of -2.0 bars and pressure potential of 0.0. Its water potential is -2 bar. The cell will gain water or swell.

Learn more about the Water Potential here: https://brainly.com/question/23855783

#SPJ1

Organic molecules (amino acids) needed to be concentrated to stimulate reactions to form proteins concentration mechanisms do not include:___.

Answers

Organic molecules (amino acids) needed to be concentrated to stimulate reactions to form protein concentration mechanisms that do not include Boiling.

Amino acids are natural compounds composed particularly of nitrogen, carbon, hydrogen, and oxygen. Your body desires 20 awesome amino acids to grow and function. amino acid, any of a group of organic molecules that consist of a basic amino group (―NH2), an acidic carboxyl group (―COOH).

fruits have an excessive content of amino acid that allows modify insulin degrees. fruits like bananas, apples, berries, and so forth., are rich resources of amino acids.

learn more about amino acid here

https://brainly.com/question/2526971

#SPJ1

Write a balanced chemical equation for the reaction of solid vanadium(V) oxide with hydrogen gas to form solid vanadium(III) oxide and liquid water.

Answers

V₂O₅ (s) + 2H₂ (g) → V₂O₃ (s) + 2H₂O(l) is the balanced chemical equation for the reaction of solid vanadium(V) oxide with hydrogen gas to form solid vanadium(III) oxide and liquid water.

What is Balanced Chemical Equation ?

The balanced chemical equation is the equation in which the number of atoms on the reactant side is equal to the number of atoms on the product side in an equation.

The word based equation is

Vanadium(V) oxide + Hydrogen gas → Vanadium (III) oxide + Water

Now write the chemical equation

V₂O₅ (s) + 2H₂ (g) → V₂O₃ (s) + 2H₂O(l)

Reactant side                Product side

V = 2                                V = 2

O = 5                                O = 5

H = 4                                 H = 4

We can see that the number of atoms on reactant side is equal to the number of atoms on product side. So the given equation is balanced.

Thus from the above conclusion we can say that V₂O₅ (s) + 2H₂ (g) → V₂O₃ (s) + 2H₂O(l) is the balanced chemical equation for the reaction of solid vanadium(V) oxide with hydrogen gas to form solid vanadium(III) oxide and liquid water.

Learn more about the Balanced chemical equation here: https://brainly.com/question/15355912

#SPJ4

The molecule CH₂O contains two single bonds and one double bond. True or false

Answers

Answer:

The answer to your question is True

Explanation:

CH2O is a polar molecule. It has three polar bonds that are arranged asymmetrically, thus allowing their dipole moments to add up and give the molecule an overall dipole moment. CH2O has a central carbon atom that forms two single bonds with the two hydrogen atoms and a double bond with the oxygen atom.

I hope this helps and have a good day!

What type of molecule is shown below?
S
H-C=C-CH2-CH3
O A. An alkene-alkyne
OB. An alkane-alkyne
OC. An alkyne
O D. An alkane

Answers

H - C ≡ C - CH₂ - CH₃ this is an alkyne molecule.

Hence, Option C is correct answer.

What is Alkane ?

The saturated hydrocarbon which have only single bonds between the carbon atoms is called Alkanes.

What is Alkene ?

The unsaturated hydrocarbon which have at least one carbon carbon double bond is called Alkene.

What is Alkynes ?

The unsaturated hydrocarbon which have one or more than one carbon carbon triple bonds is called Alkynes.

H - C ≡ C - CH₂ - CH₃ in this molecule one triple bond is present so it is alkyne.

Thus from the above conclusion we can say that H - C ≡ C - CH₂ - CH₃ this is an alkyne molecule.

Hence, Option C is correct answer.

Learn more about the Alkane, Alkene and Alkyne here: https://brainly.com/question/24270289

#SPJ1

If 5. 0 grams of kcl is dissolved in 500 ml of water, what is the concentration of the resulting solution?

Answers

If 5.0 grams of KCl is dissolved in 500 ml of water, the concentration of the resulting solution will be 0.134M.

How to calculate concentration?

The concentration of a solution can be calculated by using the following formula;

Molarity = no of moles ÷ volume

According to this question, 5.0 grams of KCl is dissolved in 500 ml of water. The concentration is calculated as follows:

no of moles of KCl = 5g ÷ 74.5g/mol = 0.067mol

Molarity = 0.067mol ÷ 0.5L = 0.134M

Therefore, if 5.0 grams of KCl is dissolved in 500 ml of water, the concentration of the resulting solution will be 0.134M.

Learn more about concentration at: https://brainly.com/question/10725862

#SPJ1

what causes a wavy pattern of dark and light bands on the bottom of a pond? A P E X learning

Answers

A wavy pattern of dark and light bands on the bottom of a pond is caused by refraction of light waves through a rough surface; option D.

What is destructive interference?

Destructive interference occur when two waves come in contact with each other and cancel each other out.

Reflection and refraction of light waves can result in destructive interference. An example of destructive interference due to refraction of light is a wavy pattern of dark and light bands on the bottom of a pond.

In conclusion, destructive interference occurs when waves cancel each other out.

Learn more about refraction of light waves at: https://brainly.com/question/15418350

#SPJ1

The answer to the question is D.

PLEASE HELP!
You are preparing standard acid and base solutions for the laboratory, using potassium hydrogen phthalate (KHC₈H₄O₄, abbreviated KHP) as the primary standard. KHP (molar mass = 204.22 g/mol) has one acidic hydrogen. You prepared solutions of both NaOH and HCl. It took 22.65 mL of the NaOH solution to titrate (react exactly with) 1.55 g KHP. It then took 25.35 mL of HCl solution to titrate 25.00 mL of the NaOH solution. What is the molarity of the HCl solution?

Answers

we will first calculate the concentration of sodium hydroxide, knowing the massive K hp. That was required to neutralize the 22.65 ml of sodium hydroxide solution. So the polarity sodium hydroxide will be take the massive K HP divided by its molar mass to get moles K HP. Then recognize one mol K HP reacted with one mole sodium hydroxide. Now we have mold sodium hydroxide to get concentration. We simply multiply by the leader volume of the sodium hydroxide solution. 22.65 ml is .02265 L. And we get a polarity of zero 0.3351 Molar sodium hydroxide. Now to calculate the concentration of hcl, we need to know the molds hcl divided by the volume of the hcl solution. To get the moles. Hcl will take the 25 ml of sodium hydroxide used in the tight rations converted to leaders. 25 ml is .02500 l multiply that by the concentration of sodium hydroxide that we just determined up here to get mold sodium hydroxide, then convert moles sodium hydroxide into molds. Hcl, recognizing it's a 1 to 1 molar relationship. Now that we have moles hcl, we just divide by the leaders of the hcl solution that was titrate, id 0.2. Sorry, 23.35 mL is 0.2335 liters. And we get a concentration of 0.3588 molar hcl. I hope that helps

A cabbage p h indicator color key. entries are 0 to 2, bright red; 3 to 4, pink; 5 to 6, purple; 7, dark violet; 8 to 9, blue; 10 to 11, bright green; 12 to 13, lighter green. why would you use a solution, such as a cabbage ph indicator, to measure the ph of household items? to see if food went bad to test the safety of water to make sure conditions are safe to use up old cabbage

Answers

We use a solution, such as a cabbage ph indicator, to measure the ph of household items :

to see if food went badto test the safety of waterto make sure conditions are safe

Cabbage ph indicator:

Anthocyanin, a water-soluble pigment found in red cabbage, can change color when combined with an acid or a basic. The color changes to red in situations with a pH under 7, and to bluish-green in alkaline (basic) environments with a pH above 7. Cabbage isn't known to cause acid reflux, but plenty of other common foods are.

Anthocyanin turns pink when it interacts with the hydronium ions in an acid, and blue or green when it interacts with the hydroxide ions in a base. Because it may inform us if a substance is acidic or basic by changing color, cabbage juice is referred to as a pH indicator.

Learn more about cabbage pH here:

https://brainly.com/question/9626174

#SPJ4

Vapor pressure of a liquid increases with increasing temperature because increasing the temperature _______________.

Answers

Vapor pressure of a liquid increases with increasing temperature because increasing the temperature results in increasing kinetic energy and increase in molecular transition and motion.

What is Vapor Pressure?

The pressure exerted by a vapor in thermodynamic equilibrium with its condensed phases (solid or liquid) at a specific temperature in a closed system is referred to as vapor pressure.A liquid's evaporation rate can be determined by looking at the equilibrium vapor pressure. It has to do with how often particles tend to float away from liquids (or a solid).Volatile is a term used to describe a chemical that has a high vapor pressure at room temperature. Vapor pressure is the force that vapor exerts when it is present above a liquid surface.A liquid's molecules have an increasing kinetic energy as its temperature rises. The more molecules that convert into a vapor as a result of an increase in molecular kinetic energy, the higher the vapor pressure will be.

Know more about vapor pressure https://brainly.com/question/14617982

#SPJ4

Which molecule will undergo only london dispersion forces when interacting with other molecules of the same kind?.

Answers

Molecules undergo London dispersion forces:

[tex]C_{4}H_{10}[/tex] is the molecule will undergo only London dispersion forces when interacting with other molecules of the same kind.

What are London dispersion forces?

A sort of force that interacts between atoms and molecules that is often electrically symmetric is referred to as a London dispersion force.When viewed from the nucleus, their electron distribution is frequently symmetrical. This dispersion force, which is also known as a transient attractive force, is frequently observed when the locations of the electrons in two nearby atoms cause the atoms to temporarily form dipoles.The bond is polar when there are significant variations between the elements' electronegativities; it is nonpolar when there are similarities. When the molecule's dipole moment is equal to O, it is nonpolar; when it differs from O, it is polar.The force at these molecules is known as the London dispersion force. In nonpolar molecules, the forces are weak, and partial charges must be induced so that they can bond. In polar molecules, partial charges caused by polarity result in a stronger link known as a dipole-dipole. The dipole-dipole is significantly stronger and known as a hydrogen bond if it is connected to a large electronegative atom (F, O, or N). Ionic force is the name for the attraction force at ionic substances.The intermolecular force in the letter an is the London dispersion force because the compound is nonpolar;

Reason for incorrect options:

b: the compound is ionic because Na is a metal and the other part is covalent,

c: two compounds are possible: one is nonpolar and exhibits London dispersion force; the other is polar and exhibits dipole-dipole force; and

d: both compounds exhibit hydrogen bonds (H bonded to O, and H bonded to F).

NOTE: Your question is incomplete, but most probably your full question was, which molecule will undergo only London dispersion forces when interacting with other molecules of the same kind? Which molecule will undergo only London dispersion forces when interacting with other molecules of the same kind?

A. [tex]C_{4}H_{10}[/tex]

B. [tex]NaC_{2}H_{3}O_{2}[/tex]

C. [tex]CH_{2}C_{12}[/tex]

D. [tex]C_{2}H_{5}OH HF[/tex]

Learn more about the London dispersion forces here,

https://brainly.com/question/22388709

#SPJ4

Other Questions
7:5 is equivalent to...? Evaluate the expression when a=5 and b= -5.-a +8b HELP I NEED HELP ASAP An air conditioning repair company has a flatservice fee and charges an hourly rate. Onecustomer pays $180 for two hours of work.Another pays $230 for three hours of work.Write a linear function for this situation. Use hFor the number of hours.C(h) = Perimeter? =Area? = Dn80 pipe 88millimeters is According to the plan All openings must be 40mm larger than the pipe. You know that The cost, in dollars, to produce x vats of ice cream is C ( x ) = 4 x + 4 . When selling them to ice cream shops, the price-demand function, in dollars per vat, is p ( x ) = 88 3 x. Find the profit function p(x). How many vats of ice cream need to be sold to maximize the profit? Find the maximum profit. Find the price to charge per vat to maximize profit A jewelry box has a volume of 14 cubic inches. The area is 7 square inches. What is the height of the jewelry box. Select the correct answer.What is the purpose of Marc Antonys speech?A. to honor Brutus and the conspiratorsB. to honor Caesars accomplishmentsC. to grieve Caesars deathD. to blame the Roman people why was The soviet invasion of hungary significant to the cold war What was the time frame of Japan's surrender after the atomic bombs were used? * 1 point 2 hours 1 week 2 months 1 year A forklift will last for only 2 more years. It costs $5,000 a year to maintain. For $20,000 you can buy a new lift that can last for 10 years and should require maintenance costs of only $2,000 a year. a-1. Calculate the equivalent cost of owning and operating the forklift if the discount rate is 4% per year. (Do not round intermediate calculations. Round your answer to 2 decimal places.) a-2. Should you replace the forklift Business Maths1703The following problems were in your worksheet on direct and inverse proportion. Reformulate therelationships as algebraic expressions and remember to define the variables you use. You do nothave to solve the expressions.5. The students in class usually drink a lot of water to help with their studies. I have found thatwith five students in the class at least 30 litres of water is needed. How much water will beneeded when there are 30 students in the class? Pleasee write a essay about:Should homework be banned? Use the drop-down menus to answer these questions about the Jim Crow laws.The Jim Crow laws were named after .The Jim Crow laws enforced .Which scenario is an example of a Jim Crow law? The Supreme Court supported the Jim Crow laws as long as they allowed . Linda is making a mosaic stepping stone to place inher garden. The stone is shown below. How muchmosaic glass tile will Linda need to cover the surfaceof five stepping stones? Use 3.14 for pie.Help please lol How is humility related to air pressure How much force is needed to accelerate a 9,760 kg airplane at a rate of 3.6 m/s2?OA. 2,711 NOB. 35,136 NOC. 126,490 NOD. 9,760 N what is the HCF ofusin prime factorization of 30 and 36 colin did the work to see if 10 is a solution to the equatio