Answer:
[tex]m_{leftover}=37g[/tex]
Explanation:
Hello!
In this case, since the melting process involves the heat added to the system, the heat of fusion and the mass of water:
[tex]Q=m\Delta H_{fus}[/tex]
Thus, as it has been reported that the heat of fusion of ice is 333.6 J/g, we can compute the melted mass of ice as shown below:
[tex]m=\frac{Q}{\Delta H_{fus}} =\frac{46000J}{333.6J/g}\\\\m=138g[/tex]
Thus, the ice leftover results:
[tex]m_{leftover}=175g-138g\\\\m_{leftover}=37g[/tex]
Regards!
Please don't just take the points. I really need help. I have so many missing assignments please
Answer:
Nuclear reactors do not produce direct carbon dioxide emissions. Unlike fossil fuel-fired power plants, nuclear reactors do not produce air pollution or carbon dioxide during operation. However, processes for mining and refining uranium ore and the production of reactor fuel all require a large amount of energy. Nuclear plants create more jobs than other forms of energy. 7 They create 0.5 jobs for every megawatt hour of electricity produced. This is in comparison to 0.19 jobs in coal, 0.05 jobs in gas-fired plants, and 0.05 in wind power. As a result, new gas-fired power plants were built from 1992 to 2005. an Advantages of nuclear energy Low-cost energy. Although building nuclear power plants has a high initial cost, it's relatively cheap to produce energy from them and they have low operating cost.
Explanation:
Scoring Scheme: 3-3-2-1 Part II. You considered the properties of two acid-base indicators, phenolphthalein and methyl orange. Many indicators are weak acids in water and establish the equilibrium: HIn(aq)(Color 1) H2O(l) H3O (aq) In-(aq)(Color 2). Indicators change color depending on whether they are in a protonated (HIn) or unprotonated (In-) form. What is the equilibrium expression for the phenolphthalein indicator in water and what colors are the protonated and unprotonated forms of the indicator
Answer:
Explanation:
Phenolphthalein is a protonated indicator and methyl orange is a basic indicator having hydroxyl ionisable part .
Phenolphthalein can be represented by the following formula
HPh which ionizes in water as follows
HPh + H₂O ⇄ H₃O⁺ + Ph⁻
( colourless ) ( pink )
In acidic solution it is in the form of protonated Hph form which is colourless
In basic medium , it ionises to give H₃O⁺ and unprotonated Ph⁻ whose colour is pink .
How long will it take for the concentration of A to decrease from 0.850 M to 0.205 for the reaction A → Products? (k = 0.0882 M⁻¹s⁻¹)
Answer:
16.1 s
Explanation:
The reaction, A → Products, follows first order kinetics.
So,
ln[A] = ln[A]o - kt
Where;
[A] = concentration at time= t
[A]o = initial concentration
k= rate constant
t = time taken
ln(0.205) = ln(0.850) - 0.0882t
ln(0.205) - ln(0.850) = - 0.0882t
-1.5847 - (-0.1625) = - 0.0882t
-1.5847 + 0.1625 = - 0.0882t
-1.4222 = - 0.0882t
t = -1.4222/- 0.0882
t = 16.1 s
Based on first order kinetics, the time taken for the concentration of A to decrease from 0.850 M to 0.205 M is 16.1 seconds.
What is order of a reaction?The order of a reaction refers to the relationship between the rate of a reaction and the the concentration of each reactant.
For a first-order reaction, the rate is dependent on the concentration of a single species.
The reaction, A → Products is a first order reaction.
Therefore, using the first order kinetics equation
ln[A] = ln[A]° - kt
Where;
[A] = concentration at time= t[A]° = initial concentrationk= rate constantt = time takenSubstituting the values:
ln(0.205) = ln(0.850) - 0.0882t
ln(0.205) - ln(0.850) = - 0.0882t
-1.5847 - (-0.1625) = - 0.0882t
-1.5847 + 0.1625 = - 0.0882t
-1.4222 = - 0.0882t
t = -1.4222/- 0.0882
t = 16.1 s
Therefore, the time taken for the concentration of A to decrease from 0.850 M to 0.205 M is 16.1 seconds.
Learn more about order of reaction at: https://brainly.com/question/7694417
Choose the aqueous solution below with the highest freezing point. These are all solutions of nonvolatile solutes and you should assume ideal van't Hoff factors where applicable.
(i) 0.200 m HOCH2CH2OH
(ii) 0.200 m Ba(NO3)2
(iii) 0.200 m K3PO3
(iv) 0.200 m Ca(CIO4)2
(v) These all have the same freezing point.
Answer:
0.200 m K3PO3
Explanation:
Let us remember that the freezing point depression is obtained from the formula;
ΔTf = Kf m i
Where;
Kf = freezing point constant
m = molality
i = Van't Hoff factor
The Van't Hoff factor has to do with the number of particles in solution. Let us consider the Van't Hoff factor for each specie.
0.200 m HOCH2CH2OH - 1
0.200 m Ba(NO3)2 - 3
0.200 m K3PO3 - 4
0.200 m Ca(CIO4)2 - 3
Hence, 0.200 m K3PO3 has the greatest van't Hoff factor and consequently the greatest freezing point depression.
Compute the value of the molar heat capacity at constant volume, CVCV, for CO2CO2 on the assumption that there is no vibrational energy. (Note: CO2CO2 is linear; SO2SO2 and H2SH2S are not. Recall that a linear polyatomic molecule has two rotational degrees of freedom, and a nonlinear molecule has three.)
Answer:
Explanation:
Molar heat capacity at constant volume Cv of a gas = n x .5 R where n is degree of freedom of the gas molecules
CO₂ is a linear molecule , so number of degree of freedom = 3 + 2 = 5
3 is translational and 2 is rotational degree of freedom . There is no vibrational degree of freedom given .
So Cv = 5 / 2 R
= 2.5 R .
Density of water is affected by (select all that apply)
A) Animals that life in the area
B) Salinity (salt concentration)
C) Temperature of water
D) Amount of plants in an area
E) How close the water is to land
Which components of the apparatus affect in motion? If you answer this and it has non to do with the question imma report u!!!!
Answer:
Explanation:
An internal force acts between elements of the system. Only external forces affect the motion of a system, according to Newton's first law. Newton's second law states that a net force on an object is responsible for its ... Prior to manned space flights, rocket sleds were used to test aircraft, missile equipment, and physiological
When you remove energy from air or land it makes the temperature
Forensic scientists encounter few drug investigations in their work.
True
False
Answer:
false
Explanation:
The octane number of gasoline is a measure of octane activity. The octane activity is determined by comparing the engine performance using gasoline and known mixtures of isooctane and n-heptane.
a. True
b. False
Answer:
A. True
Explanation:
The octane number is determined by comparing the characteristics of gasoline to isooctane (2,2,4-trimethylpentane) and heptane. The correct option is option A.
Basically, the higher the octane number, the greater the resistance of the gasoline to knocking.
The act of changing something but not being able to change it back
C3H8 (g)+ 502 (g) 3CO2 (g) + 4 H2O (g) + 531 kcal
Answer:
Exotérmica.
Explanation:
¡Hola!
En este caso, dado que la mayoría de reacciones de combustión son exotérmicas, al generar calor en los productos, es posible inferir que esta reacción, referida a la combustion de metano es exotérmica debido a lo anteriormente mencionado, ya que el término de energía de reacción, 531 kcal, está al lado de los productos, lo que quiere decir que es energía generada.
¡Saludos!
A diver planning to dive to a depth of 100 ft can choose to breathe air that is a mixture of oxygen, nitrogen, and helium. If the total pressure of the air in the tank is 3040 mm Hg , and the partial pressures of O2 and He are 304 mm Hg and 1520 mm Hg , respectively, what is the partial pressure of N2
Answer:
1216 mmHg = Partial pressure N₂
Explanation:
In a mixture of n gases, the partial pressure of each compound follows the equation:
Total pressure = Partial pressure n₁ + Partial pressure n₂ + Partial pressure n₃ + Partial pressure n₄ + Partial pressure n₅ + ... + Partial pressure nₙ
In a mixture of O₂, He and N₂, the total pressure = 3040mmHg is defined as:
3040 mmHg = Partial pressure O₂ + Partial pressure He + Partial pressure N₂
Replacing:
3040 mmHg = 304 mmHg + 1520 mmHg + Partial pressure N₂
3040 mmHg = 1824 mmHg + Partial pressure N₂
1216 mmHg = Partial pressure N₂
Indicate whether each statement is true or false.
a. When a solution is made, the enthalpy of mixing is always a positive number.
b. An increase in entropy favors mixing.
c. A solute will dissolve in a solvent if solute-solute interactions are stronger than solute-solvent interactions.
Answer: a. False.
b. True
c. False
Explanation:
a. When a solution is made, the enthalpy of mixing is always a positive number.
This is false. It should be noted that the nature of reaction determine the enthalpy which can either be positive or can be negative.
b. An increase in entropy favors mixing.
This is true because when molecules get randomly distributed, they mix with one another. Therefore, an increase in entropy favors mixing.
c. A solute will dissolve in a solvent if solute-solute interactions are stronger than solute-solvent interactions.
This is false. This is because the solute-solute interactions have to be weaker and not stronger.
a. When a solution is made, the enthalpy of mixing is always a positive number. FALSE
b. An increase in entropy favors mixing. TRUE
c. A solute will dissolve in a solvent if solute-solute interactions are stronger than solute-solvent interactions. FALSE
EntropyEntropy is the measure of a system's thermal energy per unit temperature that is unavailable for doing useful work
EntalphyEnthalpy is the sum of the system's internal energy and the product of its pressure and volume.
Learn more about entalphy:
https://brainly.com/question/25758173
What describes how a liquid flows and diffuses?
A: Fluidity
B: Viscosity
C: Surface tension
D: Condensation
The answer is option is a fluidity
Answer:
A. According to the kinetic-molecular theory of liquids, the particles are not bound together in fixed positions; instead they move about constantly giving them their fluidity
Rank the effective nuclear charge Z* experienced by a valence electron in each of these atoms:
atom Z* experienced by a valence electron.
An atom of carbon.
An atom of fluorine.
An atom of beryllium.
An atom of boron.
Answer:
The atoms are ranked in decreasing order as follows:
Fluorine ---4
Carbon ----3
Boron ------2
Beryllium --1
Explanation:
Effective nuclear charge (Zeff) is defined as the difference between the actual nuclear charge (the atomic number, Z) and the shielding constant (S).
It is calculated by finding the atomic number and electronic configuration, attributing a shielding value to each electron, adding all the shielding values and using the formula:
Z eff = Z - S
Effective nuclear charges:
An atom of carbon: 3.25
An atom of fluorine: 5.20
An atom of beryllium: 1.95
An atom of boron: 2.60
Nuclear energy could come from
A
kicking a soccer ball.
B
heat inside the Earth.
C
splitting atoms apart.
D
solar panels.
Answer:
C Splitting atoms apart
explain why vapour pressure increases with increasing temperature.
One mole of a metallic oxide reacts with one mole of hydrogen to produce two moles of the pure metal
and one mole of water. 5.00 g of the metallic oxide produces 2.32 g of the metal. What is the metallic
oxide? (Use molar masses)
Answer:
Lithium oxide, Li₂O.
Explanation:
Hello!
In this case, according to the given amounts, it is possible to write down the chemical reaction as shown below:
[tex]M_2O+H_2\rightarrow 2M+H_2O[/tex]
Which means that the metallic oxide has the following formula: M₂O. Next, we can set up the following proportional factors according to the chemical reaction:
Thus, we perform the operations in order to obtain:
[tex]\frac{10X}{(2X+16)}=2.32[/tex]
So we solve for x as shown below:
[tex]10X=2.32(2X+16)\\\\10X=4.64X+37.12\\\\X=\frac{37.12}{10-4.64}\\\\X= 6.93g/mol[/tex]
Whose molar mass corresponds to lithium, and therefore, the metallic oxide is lithium oxide, Li₂O.
Best regards!
What is the M, of C3H,COONa? A: Na = 23; C = 12, 0 = 16:
110
87
98
103
Answer: Molecular mass of [tex]CH_3COONa[/tex] is 82 g
Explanation:
Molecular mass (M) is defined as the mass in grams of 1 mole of a substance.
S.I Unit of Molar mass is gram per mole and it is represented as g/mol.
Atomic Mass of Carbon (C) = 12 g
Atomic Mass of hydrogen (H) = 1 g
Atomic Mass of oxygen (O) = 16 g
Atomic Mass of sodium (Na) = 23 g
Molecular mass of [tex]CH_3COONa[/tex] = 12(1)+1(3)+12(1)+16(2)+23(1) = 82 g
Why do clumps of particles have slower reaction rates than particles that are separated?
Explanation:
Cause the clumps are so compacted together that it is harder to brake apart but the one that are separated are easy cause they do not have all the pressure on them and when they go to add reaction it is faster
What is the cathode ray? How was the Nature of cathode rays determined?
Answer:
Cathode rays are streams of electrons observed in discharge tubes. In 1897, British physicist J. J. Thomson showed that cathode rays were composed of a previously unknown negatively charged particle, which was later named the electron. Cathode-ray tubes (CRTs) use a focused beam of electrons deflected by electric or magnetic fields to render an image on a screen.
What is the overall reaction order for a reaction with the following rate law?
Rate =
k[BrO 3 ][Br][ht]2
Answer:
4
Explanation:
In a rate law, The reaction order is basically the superscript (power) of the concentration of the reaction. It defines the extent to which the rate of the reaction depends on the concentration of the reaction.
In this rate law, the order of the reactants are;
[BrO3] = 1
[Br] = 1
[ht] = 2
The overall reaction order is the sum total of the individual orders. We have;
1 +1 + 2 = 4
A catalyst will
a) Increase the reaction rate
b) Move the equilibrium to the right
c) Be consumed by the reaction
d) Increase the activation energy
Answer:
increase the chemical rate
b) All atoms contain
charged electrons.
Answer:
b) All atoms contain
charged electrons.
Explanation:
If 50 ml of 0.235 M NaCl solution is diluted to 200.0 ml what is the concentration of the diluted solution
This is a straightforward dilution calculation that can be done using the equation
[tex]M_1V_1=M_2V_2[/tex]
where M₁ and M₂ are the initial and final (or undiluted and diluted) molar concentrations of the solution, respectively, and V₁ and V₂ are the initial and final (or undiluted and diluted) volumes of the solution, respectively.
Here, we have the initial concentration (M₁) and the initial (V₁) and final (V₂) volumes, and we want to find the final concentration (M₂), or the concentration of the solution after dilution. So, we can rearrange our equation to solve for M₂:
[tex]M_2=\frac{M_1V_1}{V_2}.[/tex]
Substituting in our values, we get
[tex]\[M_2=\frac{\left ( 50 \text{ mL} \right )\left ( 0.235 \text{ M} \right )}{\left ( 200.0 \text{ mL} \right )}= 0.05875 \text{ M}\].[/tex]
So the concentration of the diluted solution is 0.05875 M. You can round that value if necessary according to the appropriate number of sig figs. Note that we don't have to convert our volumes from mL to L since their conversion factors would cancel out anyway; what's important is the ratio of the volumes, which would be the same whether they're presented in milliliters or liters.
What happens during ice wedging
Answer:water expands as it goes from liquid to solid.
Explanation:
The temperature is warm , water works it’s way to to cracks in rock
HELPPPP PLZ
Using an applied force to move an object in the direction of the force is...
potential energy
the scientific definition of work
none of these
the scientific definition of power
Answer:
the scientific definition of work
Explanation:
In physics, work is defined as the use of force to move an object. For work to be done, the force must be applied in the same direction that the object moves.
I hope it helps! ^^
☁️☁️☁️☁️☁️☁️☁️
What is the Chemical formula for Hexacarbon octaphosphide?
Answer:C6P8
Explanation:
PLEASE PLEASE HELP!!!
Click an item in the list or group of pictures at the bottom of the problem and, holding the button down, drag it into the
correct position in the answer box. Release your mouse button when the item is place. If you change your mind, drag
the item to the trashcan. Click the trashcan to clear all your answers.
Make a Punnett Square for two smooth seed hybrid pea plants (Ss)
Click once to select an item at the bottom of the problem.
Click again to drop the item in its correct place.
S
SS SS SS S