7x — 3х – 4 = -1 + 21

The equation to find out how much money Johnny has saved is: Total money saved = 100 + 15W. Independent variable: Number of weeks (W) and Dependent variable: Total money saved.

We are given the following information:

Johnny has $100 in the bank initially.

He plans to deposit $15 per week.

To find out how much money Johnny has saved over time, we can use an equation that calculates the total money saved based on the number of weeks.

Let's define the variables: W represents the number of weeks.

Total money saved represents the amount of money Johnny has saved over time. The equation to calculate the total money saved is:

Total money saved = $100 + ($15 * Number of weeks)

In this equation, the $100 represents the initial amount Johnny had in the bank. The ($15 * Number of weeks) represents the total amount he has deposited over the number of weeks.

The independent variable is the "Number of weeks" because it can vary, and we can calculate the total money saved for different time periods by plugging in different values for this variable.

The dependent variable is the "Total money saved" because it depends on the number of weeks. The value of this variable changes based on the number of weeks Johnny has been saving.

By plugging in different values for the number of weeks (W), we can calculate the corresponding total money saved.

For example, if Johnny has been saving for 10 weeks, we can substitute W = 10 into the equation to find the total money saved over that time period.

Learn more about variable here:

https://brainly.com/question/29430246

#SPJ11

Thus, For n = 11 and alpha = 0.01, the critical values of r are approximately -0.869 and 0.869. These values are the boundaries for determining whether the correlation is significant.

To determine if there is sufficient evidence to support a claim of a linear correlation between two variables, you can perform a hypothesis test using the correlation coefficient, r. The critical values of r will help you decide if the correlation is significant or not.

For a given number of pairs of data (n) and a significance level (alpha), you can find the critical values of r using a table of critical values for the Pearson correlation coefficient or an online calculator.

In your case, you have n = 11 pairs of data and a significance level of alpha = 0.01. Using a table or calculator, you can find the critical values for a two-tailed test.

For n = 11 and alpha = 0.01, the critical values of r are approximately -0.869 and 0.869. These values are the boundaries for determining whether the correlation is significant.

If the calculated value of r falls between these critical values (-0.869 and 0.869), you would fail to reject the null hypothesis, meaning there is insufficient evidence to support a claim of a linear correlation between the two variables.

However, if the calculated value of r is less than -0.869 or greater than 0.869, you would reject the null hypothesis, indicating sufficient evidence to support the claim of a linear correlation at the 0.01 significance level.

Know more about the  significance level (alpha)

https://brainly.com/question/30135603

#SPJ11

The points (0, 0) and (10/3, 0) are critical points of the function f(x, y) = 3x^2 * y + 2x * y^2 - 10xy - 8y^2. The point (0, 0) is a saddle point, while the point (10/3, 0) is a relative minimum.

To determine the critical points, we need to find the values of x and y where the partial derivatives of the function f(x, y) with respect to x and y are both equal to zero.

Taking the partial derivative with respect to x, we have:

∂f/∂x = 6xy + 2y^2 - 10y

Taking the partial derivative with respect to y, we have:

∂f/∂y = 3x^2 + 4xy - 10x - 16y

Setting both partial derivatives equal to zero and solving, we find two critical points: (0, 0) and (10/3, 0).

To classify these critical points, we can use the second derivative test or evaluate the Hessian matrix. However, in this case, evaluating the Hessian matrix is not necessary. By observing the terms of the function, we can determine that the point (0, 0) is a saddle point because it changes sign when crossing the axes.

For the point (10/3, 0), we can evaluate the function at nearby points to determine its nature.

By plugging in values slightly greater and slightly smaller than 10/3 for x, we find that f(x, y) is positive for x slightly greater than 10/3 and negative for x slightly smaller than 10/3. Therefore, (10/3, 0) is a relative minimum.

Learn more about saddle point here: brainly.com/question/31405597

#SPJ11

Answer:

Step-by-step explanation:

The type of diagram used to graphically show the relationship between two numerical variables is called a scatter plot.

A scatter plot is a visual representation of data points plotted on a graph, with one variable represented on the x-axis and the other variable represented on the y-axis.

Each data point on the plot corresponds to a pair of values from the two variables being analyzed. The position of each point on the graph indicates the values of both variables, allowing us to examine the relationship between them.

The main purpose of a scatter plot is to visualize the correlation or relationship between the two variables. The pattern formed by the data points on the plot can indicate the direction, strength, and nature of the relationship.

For example, if the points on the scatter plot tend to form a linear pattern, it suggests a linear relationship between the variables. On the other hand, if the points are scattered randomly with no clear pattern, it indicates a weak or no relationship between the variables.

Scatter plots are commonly used in various fields, including statistics, data analysis, and scientific research. They provide a visual way to explore and interpret relationships between variables, identify outliers, detect trends, and assess the strength and direction of associations.

To know more about graph click here

brainly.com/question/2025686

#SPJ1

The quadratic term ([tex]-5.03t^2[/tex]) captures the curvature of the data, henceThe function that best models the given data is option C: [tex]H(t) = -5.03t^2 + 10.22t + 2.99[/tex].

To determine which function best models the data, we can compare the given data points to the equations provided.

The given data consists of time, t (in seconds), and height, h (in meters). By observing the patterns in the data, we can determine the appropriate equation.

Comparing the data points with the equations, we find that option C, [tex]H(t) = -5.03t^2 + 10.22t + 2.99[/tex], best fits the given data. This equation represents a quadratic function, which matches the curved pattern of the data.

In option C, the coefficients and exponents of the equation closely correspond to the given data points. The quadratic term[tex](-5.03t^2)[/tex] captures the curvature of the data, and the linear terms [tex](10.22t + 2.99)[/tex]account for the overall trend of the data points.

Therefore, the best function that models the given data is C: [tex]H(t) = -5.03t^2 + 10.22t + 2.99.[/tex]

Learn more about quadratic here:

https://brainly.com/question/30398551

#SPJ11

The answer is .  this result is not possible since the number of people cannot be negative. There must be an error in the initial data provided.

Let x be the number of people who paid GH¢20 each.

Then, the number of people who paid GH¢30 each is 350 − x.

The total amount collected from those who paid GH¢20 each is 20x, while the total amount collected from those who paid GH¢30 each is 30(350 − x).

The sum of these two amounts is GH¢ 800, so we can write an equation:

20x + 30(350 − x) = 800

Simplify the left side of the equation:

20x + 10500 − 30x = 800

Simplify the equation:−10x = −9700x

= 970

Thus, the number of people who paid GH¢20 each is x = 970, and the number of people who paid GH¢30 each is

350 − x = 350 − 970

= −620.

However, this result is not possible since the number of people cannot be negative.

Therefore, there must be an error in the initial data provided.

To know more about Equation visit:

https://brainly.com/question/29174899

#SPJ11

Answer:

-------------------

Find the volume of the given cone:

Substitute to get:

The statement is true because if the cross product of two vectors ~u and ~v in three-dimensional space is equal to the zero vector ~0, then it implies that either ~u or ~v is equal to the zero vector ~0.

The cross product ~u × ~v produces a vector that is perpendicular (orthogonal) to both ~u and ~v. If the resulting cross product is the zero vector ~0, it means that ~u and ~v are either parallel or collinear.

If ~u and ~v are parallel or collinear, it implies that they are scalar multiples of each other. In this case, one of the vectors can be expressed as a scaled version of the other. Consequently, either ~u or ~v can be the zero vector ~0.

Learn more about vectors https://brainly.com/question/29740341

#SPJ11

The given options can be represented in the following general form:

Circle with center (h, k) and radius r is expressed in the form

(x - h)^2 + (y - k)^2 = r^2.

Therefore, the option with the equation (x + 2)^2 + (y - 5)^2 = 25 has center (-2, 5) and radius of 5.

Let us plug in the point (-1, 1) in the equation:

(-1 + 2)^2 + (1 - 5)^2 = 25(1)^2 + (-4)^2 = 25.

Thus, the point (-1, 1) does not lie on the circle

(x + 2)^2 + (y - 5)^2 = 25.

In conclusion, the point (-1, 1) does not lie on the circle

(x + 2)^2 + (y - 5)^2 = 25.

To know more about Circle visit:

https://brainly.com/question/12930236

#SPJ11

The area of the rectangle ABCD is approximately 29.15 square units.

To find the area of the rectangle ABCD, we can use the formula for the area of a rectangle, which is given by the product of its length and width.

Let's first find the length and width of the rectangle using the coordinates of its vertices.

Length AB = distance between points A and B

= √[(x₂ - x₁)² + (y₂ - y₁)²]

= √[(1 - (-4))² + (4 - 4)²]

= √[5² + 0²]

= √25

= 5

Width BC = distance between points B and C

= √[(x₂ - x₁)² + (y₂ - y₁)²]

= √[(-4 - 1)² + (1 - 4)²]

= √[(-5)² + (-3)²]

= √[25 + 9]

= √34

Now that we have the length and width, we can calculate the area of the rectangle.

Area = Length × Width

= 5 × √34

≈ 5 × 5.83

≈ 29.15 square units

Therefore, the area of the rectangle ABCD is approximately 29.15 square units.

for such more question on rectangle

https://brainly.com/question/17297081

#SPJ11

The sets of data that  show the correct median is given as follows.

Correct Median:

9, 3, 6, 1, 4 (median = 4)

1, 6, 9 (median = 6)

​4. 9, 11, 13, 16, 20 (median = 12)

Incorrect Median:

2. 7.9, 11, 14, 76 (median = 76)

43, 46, 48, 52 (median = 48)

3, 10, 7 (median = 10)

The median is the value that separates the upper and lower halves of a data sample, population, or probability distribution in statistics and probability theory. It is sometimes referred to as "the middle" value in a data collection.

Arrange the data points from smallest to greatest to get the median. If the number of data points is odd, the median is the data point in the middle of the list. If the number of data points in the list is even, the median is the average of the two middle data points.

Learn more about median at:

https://brainly.com/question/26151333

#SPJ1

Full Question:

Which sets of data show the correct media? Sort the tiles into their proper categories. 9, 3, 6, 1, 4 (median = 4) Correct Median Incorrect Median 4. 9, 11, 13, 16, 20 (median = 12) 1, 6, 9 (median = 6) 2. 7.9, 11, 14, 76 (median = 76) 43, 46, 48, 52 (median = 48) 3, 10, 7 (median = 10)​

The sum for the telescoping series is given by the limit of Sn as n approaches infinity:

S = lim(n→∞) Sn = lim(n→∞) 2 + 5/2 - 1/(n+1) = 9/2.

First, let's find Sn:

Sn = 3C0/(n+1)(n+2) + 3C1/(n)(n+1) + ... + 3Cn/(1)(2)

Notice that each term has a denominator in the form (k)(k+1), which suggests we can use partial fractions to simplify:

3Ck/(k)(k+1) = A/(k) + B/(k+1)

Multiplying both sides by (k)(k+1), we get:

3Ck = A(k+1) + B(k)

Setting k=0, we get:

3C0 = A(1) + B(0)

A = 3

Setting k=1, we get:

3C1 = A(2) + B(1)

B = -1

Therefore,

3Ck/(k)(k+1) = 3/k - 1/(k+1)

So, we can write the sum as:

Sn = 3/1 - 1/2 + 3/2 - 1/3 + ... + 3/n - 1/(n+1)

Simplifying,

Sn = 2 + 5/2 - 1/(n+1)

Now, we can find the different partial sums:

S1 = 2 + 5/2 - 1/2 = 4

S2 = 2 + 5/2 - 1/2 + 3/6 = 17/6

S3 = 2 + 5/2 - 1/2 + 3/6 - 1/12 = 7/4

S4 = 2 + 5/2 - 1/2 + 3/6 - 1/12 + 3/20 = 47/20

Finally, the sum for the telescoping series is given by the limit of Sn as n approaches infinity:

S = lim(n→∞) Sn = lim(n→∞) 2 + 5/2 - 1/(n+1) = 9/2.

Learn more about telescoping series here:

https://brainly.com/question/14523424

#SPJ11

To solve this problem, we can use the binomial probability formula. The binomial distribution is applicable here because we have a fixed number of trials (selecting 10 U.S. adults) and each trial has two possible outcomes (having very little confidence or not having very little confidence in newspapers).

The formula for the probability of obtaining exactly 'k' successes in 'n' trials, where the probability of success is 'p', is:

[tex]P(X = k) = C(n, k) * p^k * (1 - p)^(n - k)[/tex]

where C(n, k) represents the number of combinations of 'n' items taken 'k' at a time.

(a) To find the probability of exactly five U.S. adults having very little confidence in newspapers, we substitute the values into the formula:

[tex]P(X = 5) = C(10, 5) * (0.64)^5 * (1 - 0.64)^(10 - 5)[/tex]

Calculating this expression will give us the probability.

(b) To find the probability of at least six U.S. adults having very little confidence in newspapers, we need to calculate the sum of probabilities for six, seven, eight, nine, and ten successes:

P(X ≥ 6) = P(X = 6) + P(X = 7) + P(X = 8) + P(X = 9) + P(X = 10)

(c) To find the probability of less than four U.S. adults having very little confidence in newspapers, we need to calculate the sum of probabilities for zero, one, two, and three successes:

P(X < 4) = P(X = 0) + P(X = 1) + P(X = 2) + P(X = 3)

Using the binomial probability formula and the appropriate combinations, we can calculate these probabilities.

Learn more about probability here:

https://brainly.com/question/30853716

#SPJ11

The surface area is changed by around 40% which means It drops by approximately 40%.

Option A is the correct answer.

We have,

To find the percentage change in surface area, we need to calculate the new surface area after the weight drop and then find the percentage difference.

Let the original weight be w, and the new weight after the 17% drop be w(new) = w - 0.17w = 0.83w.

The original surface area.

S(h, w) = √(hw) / 60.

The new surface area.

S(h, w_new) = √(h x 0.83w) / 60.

To find the percentage change, we calculate the difference between the two surface areas and divide it by the original surface area, then multiply by 100:

Percentage Change

= [(S(h, w) - S(h, w(new))) / S(h, w)] x 100

Now let's plug in the formula for surface area:

Percentage Change

= [((√(hw) / 60) - (√(h * 0.83w) / 60)) / (√(hw) / 60)] * 100

= [(√(hw) - √(h * 0.83w)) / √(hw)] * 100

= [0.398w / √(hw)] * 100

= 39.8%

= 40%

Thus,

The surface area is changed by around 40% which means It drops by approximately 40% which is option A.

Learn more about percentages here:

https://brainly.com/question/11403063

#SPJ12

The complete question:

The Mosteller formula for approximating the surface area S, in square meters (m²), of a human is given by the function below, where h is the person's height in centimeters and w is the person's weight in kilograms.

S(h, w) = √(hw) / 60

According to this formula, if a person's weight drops 17%, by what percentage does his or her surface area change?

Choose the correct answer below.

A. It drops by approximately 40%.

B. It drops by approximately 20%.

C. It drops by approximately 30%.

D. It drops by approximately 10%.

The equation for her total cost y would be:

y = 45x

Let's use x to represent the number of months and y to represent the total cost.

For George from Acme TV:

The set-up fee is a one-time payment of [tex]$50[/tex], so it does not depend on the number of months.

For each month, he pays [tex]$35[/tex].

The equation for his total cost y would be:

y = 35x + 50

For Gwen from Metro TV:

There is no set-up fee, so her cost only depends on the number of months.

For each month, she pays [tex]$45[/tex].

The equation for her total cost y would be:

y = 45x

It's worth noting that these equations assume that the monthly fees remain constant over time, which may not necessarily be the case in real life.

Additionally, these equations do not take into account any potential taxes or additional fees that may be added to the cost of the memberships.

For similar questions on equation

https://brainly.com/question/17145398

#SPJ11

The given graph image in the attached file does not represent a translation.

Translation in transformation is defined as  the process of moving or transforming an object from one place to another without changing the shape, angle or size. This transformation can be gotten by applying a set of rules or functions to the coordinates of each point on the graph.

The most common types of graph transformations are vertical and horizontal transformations. Vertical translation moves the graph up and down along the Y axis, and horizontal translation moves the graph left and right along the X axis.

From the given attached image, we can see that both lines seem to be at different angles and we recall that when carrying out translation, we don't change length or angle and as such the figure does not represent a translation.

Thus, we can conclude that the images do not represent a translation.

Read more about Transformation Translation at: https://brainly.com/question/4289712

#SPJ4

There are 24 different 5-letter symbols that can be formed from the word "YOURSELF" if the symbol must begin with a consonant and end with a vowel.

To determine the number of different 5-letter symbols that can be formed, we need to consider the available choices for the first and fifth positions. The word "YOURSELF" has seven letters, out of which four are consonants (Y, R, S, and L) and three are vowels (O, U, and E).
Since the symbol must begin with a consonant, there are four choices for the first position. Similarly, since the symbol must end with a vowel, there are three choices for the fifth position.
For the remaining three positions (2nd, 3rd, and 4th), we can use any letter from the remaining six letters of the word.
Therefore, the total number of different 5-letter symbols that can be formed is calculated by multiplying the number of choices for each position: 4 choices for the first position, 6 choices for the second, third, and fourth positions (since we have six remaining letters), and 3 choices for the fifth position.
Thus, the total number of different 5-letter symbols is 4 * 6 * 6 * 6 * 3 = 24 * 36 = 864.

Learn more about formed here
https://brainly.com/question/28973141



#SPJ11

Therefore, there are about 203 pennies in the bag. This is a 90-word long answer. If you need to provide a 250-word answer, you can expand the explanation by discussing the weight and denomination of pennies, their history, and their use.

To find out the number of pennies in a bag that weighs 711.55 grams, we need to divide the total weight by the weight of each penny. We know that each penny weighs 3.5 grams,

therefore: Number of pennies = Total weight of bag / Weight of one penny= 711.55 / 3.5 = 203.015 ≈ 203 (rounded to the nearest whole number)

Therefore, there are about 203 pennies in the bag. To summarize the answer in a long answer format, we can write: We can find the number of pennies in the bag by dividing the total weight of the bag by the weight of each penny. Given that each penny weighs 3.5 grams, we can find out the number of pennies by dividing 711.55 grams by 3.5 grams.

Therefore, Number of pennies = Total weight of bag / Weight of one penny= 711.55 / 3.5 = 203.015 ≈ 203 (rounded to the nearest whole number)

Therefore, there are about 203 pennies in the bag. This is a 90-word long answer. If you need to provide a 250-word answer, you can expand the explanation by discussing the weight and denomination of pennies, their history, and their use.

To know more about number visit:

https://brainly.com/question/3589540

#SPJ11

The answer to your question depends on the specific context and analysis being referred to. In statistical analysis, a coefficient is a measure of the strength and direction of the relationship between two variables. The term "statistically significant" refers to whether a result or relationship observed in a sample is likely to hold true in the larger population, based on the probability of obtaining such a result by chance.

If the coefficient for population is found to be statistically significant at a certain level, this means that the relationship between population and the outcome being studied is unlikely to have occurred by chance alone.

In your question, the possible answers suggest different levels of statistical significance, ranging from 1% to 49.5%. Generally, a standard level of significance is set at 5%, meaning that there is a 95% chance that the relationship observed in the sample is true for the population as a whole. If the coefficient for population is found to be statistically significant at the 5% level, this would suggest that the relationship is strong enough to be confident that it holds true in the larger population.

However, if the coefficient is only statistically significant at a higher level (such as 1%), this suggests an even stronger relationship between population and the outcome being studied. On the other hand, if the coefficient is not statistically significant at any level (i.e. it is "insignificant"), this suggests that there is not enough evidence to support a relationship between population and the outcome, or that any relationship that does exist is weak and likely due to chance.

Without more context or information about the specific analysis being conducted, it is difficult to determine which of these answers is correct. However, if a coefficient for population is found to be statistically significant, it is important to provide an explanation of what this means in the context of the research question and the data being analyzed.  

To know more about statistically visit:

https://brainly.com/question/30389845

#SPJ11

The velocity is  1.62 meters per second to the west.

We know that John mows 11.5 meters lan from east to west in 7.1 seconds.

Then we know that.

distance = 11.5 meters

time = 7.1 seconds.

To get the velocity, we just need to take the quotient between the distance and the time (and we need to clarifiy the direction), so we will get:

Velocity = distance/time

velocity = 11.5 meters/7.1 seconds

velocity = 1.62 meters per second to the west.

That is the velocity of the lawnmower.

Learn more about velocity at:

https://brainly.com/question/80295

#SPJ4

Answer: its 40 because its a whole number

Step-by-step explanation:

the total cost of the boxes of tiles Karim buys is £78.

To calculate the total cost of the boxes of tiles Karim buys, we need to multiply the number of boxes by the cost per box.

Given that there are 25 tiles in each box and Karim buys 200 tiles, we can determine the number of boxes as follows:

Number of boxes = Total number of tiles / Tiles per box

Number of boxes = 200 tiles / 25 tiles per box

Number of boxes = 8 boxes

Next, we multiply the number of boxes by the cost per box to find the total cost:

Total cost = Number of boxes * Cost per box

Total cost = 8 boxes * £9.75 per box

Total cost = £78

To know more about number visit:

brainly.com/question/3589540

#SPJ11

There are 6 left cosets of Ka4l in Kal.

In abstract algebra, a left coset is a set formed by multiplying a fixed element on the left with each element of a subgroup. In this case, we have the subgroup Ka4l within the group Kal. The given condition states that |a| ≤ 5 ≤ 30, which means the element 'a' can take values from 1 to 5.

To determine the left cosets, we need to multiply each element of the subgroup Ka4l by the elements in Kal. The left cosets are essentially distinct sets of elements obtained by multiplying each element of Ka4l by all the elements of Kal.

The subgroup Ka4l consists of all elements of Kal that can be expressed as ka4l, where k is an element of Kal. Multiplying each element of Ka4l by elements of Kal, we obtain the following left cosets:

1. {ka4l : k ∈ Kal}

2. {2a4l : k ∈ Kal}

3. {3a4l : k ∈ Kal}

4. {4a4l : k ∈ Kal}

5. {5a4l : k ∈ Kal}

6. {6a4l : k ∈ Kal}

These are the six left cosets of Ka4l in Kal.

Learn more about abstract algebra

brainly.com/question/27778848

#SPJ11

If a bank has checkable deposits of 15,000, it would be required to hold 3,000 in reserves, based on a reserve requirement of 20%.

To calculate the amount of checkable deposits that would require a bank to hold 3,000 in reserves, we need to use the formula:

Required reserves = Reserve requirement ratio x Checkable deposits

If the reserve requirement is 20%, then the reserve requirement ratio is 0.20. Let's assume that the bank has checkable deposits of X dollars. Then we can set up the following equation:

0.20 X = 3,000

Solving for X, we get:

X = 3,000 ÷ 0.20

X = 15,000

Therefore, if a bank has checkable deposits of 15,000, it would be required to hold 3,000 in reserves, based on a reserve requirement of 20%.

for such more question on Required reserves

https://brainly.com/question/13758092

#SPJ11

If a bank has checkable deposits of $15,000 and a reserve requirement of 20 percent, it must have at least $3,000 of reserves on hand.

This reserve requirement is a regulation set by the Federal Reserve that requires banks to hold a certain percentage of their checkable deposits in reserves, either as cash in their vault or as deposits at the Federal Reserve. This requirement ensures that banks have enough funds on hand to cover withdrawals by customers and maintain financial stability. If a bank falls below the reserve requirement, it may be subject to penalties and restrictions on its ability to lend and operate.
A reserve requirement of 20 percent means that a bank must keep 20% of its checkable deposits as reserves. If a bank must have at least $3,000 of reserves, you can find the total checkable deposits by using the following steps:

1. Write down the equation: Reserves = Reserve Requirement × Checkable Deposits
2. Plug in the given values: $3,000 = 0.20 × Checkable Deposits
3. Divide both sides by 0.20 to find the Checkable Deposits: Checkable Deposits = $3,000 ÷ 0.20

Checkable Deposits = $15,000

Therefore, if a bank has a reserve requirement of 20 percent and must have at least $3,000 of reserves, its checkable deposits must be $15,000.

To learn more about reserve requirement click here, brainly.com/question/30053423

#SPJ11

The radius of convergence of a power series function is a positive real number R that determines the interval of values for which the power series converges.

It represents the distance from the center of the power series expansion, within which the series converges. The radius of convergence is determined by the properties of the coefficients in the power series. Specifically, it is defined as the reciprocal of the limit superior of the absolute values of the coefficients. Mathematically, if we have a power series function of the form:

f(x) = ∑(n=0 to ∞) aₙ(x - c)ⁿ

where aₙ represents the coefficients and c is the center of the series, then the radius of convergence R is given by:

R = 1 / lim sup |aₙ|^(1/n)

The power series converges for all values of x within the interval (c - R, c + R). If |x - c| > R, the series diverges.

It's important to note that the radius of convergence can be zero, indicating that the power series only converges at the center point (x = c), or it can be infinite, indicating that the series converges for all values of x.

Learn more about convergence here: brainly.com/question/32386095

#SPJ11

Mrs. Falkener has written a company report every 3 months for the last 6 years, resulting in a total of 24 reports. Among these reports, 2/3 of them show the company earning more money than it spends. Therefore, 1/3 of the reports, or 8 reports, show the company spending more money than it earns.

In 6 years, there are 12 quarters since there are 4 quarters in a year. Mrs. Falkener has written a company report every 3 months, which means there are 12 * 3 = 36 periods in total. However, since each report covers a 3-month period, the total number of reports is 36 / 3 = 12.

Given that 2/3 of the reports show the company earning more money than it spends, we can calculate the number of reports showing the company spending more money than it earns. Since 2/3 of the reports represent the earnings being greater, the remaining 1/3 represents the expenses being greater. Therefore, 1/3 of 12 reports is 12 * (1/3) = 4 reports.

In conclusion, among the 24 company reports written by Mrs. Falkener in the last 6 years, 2/3 of them, or 16 reports, show the company earning more money than it spends. The remaining 1/3, or 8 reports, show the company spending more money than it earns.

Learn more about  earning here :

https://brainly.com/question/28045589

#SPJ11