9,372,282 rounded to 1,000

Answer:

Step-by-step explanation:

The volume of water in a pool can be calculated using the following formula:

Volume (in gallons) = Length (in feet) x Width (in feet) x Average Depth (in feet) x 7.5

For example, if your pool is 20 feet long, 15 feet wide, and has an average depth of 5 feet, the volume of water in your pool would be:

20 x 15 x 5 x 7.5 = 5625 gallons

Note: If you prefer metric units, the formula for volume in liters would be:

Volume (in liters) = Length (in meters) x Width (in meters) x Average Depth (in meters) x 1000

It's important to note that this formula assumes a standard rectangular or square pool shape. If your pool has a more complex shape, you may need to measure the volume in smaller sections and add the volumes together to get the total volume.

Double integration in polar coordinates involves integrating a function over a two-dimensional region in the polar coordinate system. This is done by setting up a double integral in terms of r and θ, and integrating first with respect to r and then with respect to θ.

Double integration in polar coordinates involves integrating a function over a two-dimensional region in the polar coordinate system. The steps to double integrate a function in polar coordinates are as follows:

1. Determine the limits of integration for r and θ. These limits define the region over which the function will be integrated. Typically, the limits are determined by the boundaries of the region in the xy plane.

2. Write the function to be integrated in terms of r and θ. The function must be expressed in polar coordinates for integration in polar coordinates.

3. Set up the double integral by writing the function in polar coordinates, multiplying by the appropriate factors of r and integrating with respect to r first and then θ.

4. Integrate the function with respect to r, using the limits of integration for r determined in step 1.

5. Integrate the result from step 4 with respect to θ, using the limits of integration for θ determined in step 1.

The general form of a double integral in polar coordinates is:

∫∫f(r, θ)r dr dθ

where f(r, θ) is the function to be integrated, and r and θ are the polar coordinates.

Learn more about polar coordinates here: brainly.com/question/11657509

#SPJ4

The value of a and b are 1 and -8 respectively.

Quadratic expressions are polynomial expressions of second degree.

The general form of a quadratic expression is ax² + b x + c.

The given quadratic expression is x² + 2x - 7.

We have to write this in the form (x + a)² + b.

We have the algebraic identity a² + 2ab + b² = (a + b)²

x² + 2x - 7 = x² + 2x - 7 + 1 - 1

                 = (x² + 2x + 1) - 7 - 1

                 = (x + 1)² - 8, which is in the form (x + a)² + b.

a = 1 and b = -8

Hence the value of a is 1 and the value of b is -8.

Solve more problems about Quadratic Expression here :

https://brainly.com/question/8732536

#SPJ9

Converting 1 pound to 2 cups is mainly used for cooking and baking. One pound equals two cups.

Pound:

A pound is a unit of mass used to measure the weight of dry ingredients. It is expressed in "pounds" and equals 16 ounces in the traditional American system. On the other hand, there are two types of pounds used in England, the common American pound (avoirdupois pound) and the British imperial pound, which are slightly different from each other. So remember the pounds used in the recipe book you're working on.

Cups:

Cups are an important tool for measuring ingredients in the kitchen. It is mainly used for measuring the volume of liquid ingredients such as water, milk, butter, etc. or for measuring dry grain or powder ingredients such as coffee beans, chocolate chips, flour, sugar, etc.

There are two types of measuring cups:

Measuring cups are normally supplied with a printed weighing scale. We can fill the cup with ingredients according to this scale. Liquid measuring cups are usually made of a transparent material such as glass or plastic. This makes it easier to fill accurately.

According to the Question:

1 cup = ½ lb

To calculate how many pounds are in a given number of cups, you can do it with the following simple formula:

Pounds = Cups × ½

Or, Pounds = Cups × 0.5

Learn more about Pound:

https://brainly.com/question/29181271

#SPJ4

The restocking fee of item priced 180 is $10.8.

Proportion, in general, is referred to as a part, share, or number considered in comparative relation to a whole. Proportion definition says that when two ratios are equivalent, they are in proportion. It is an equation or statement used to depict that two ratios or fractions are equal.

Given that,

An item priced at 200 has a fee of 12.

An item priced at 150 has a fee of 9.

Let the restocking fee of item priced 180 be x.

Now, 200:12 :: 150:9 :: 180:x

50/3 :: 50/3 :: 180/x

50x=540

x=54/5

x=10.8

Therefore, the restocking fee of item priced 180 is $10.8.

To learn more about the proportions visit:

https://brainly.com/question/7096655.

#SPJ9

Answer:

A) √(13)

Step-by-step explanation:

We can more clearly see the difference in the values of the numbers if we convert/approximate them all to a decimal form.

7/2 = 3.5

A) √(13) ≈ 3.6     > 3.5

B) ∛(27) = 3         < 3.5

C) 3.4                   < 3.5

D) π ≈ 3.1              < 3.5

From these approximations, we can see that A) √(13) is the only answer choice that evaluates to greater than 7/2.

In The equation, A equal to 2,400 plus quantity 1 plus 0.031 over 4 end quantity all raised to the power of 4 times t, represents the amount of money earned on a compound interest savings account, A. The value 0.031 represents the interest rate, which means the annual compounded interest rate is 3.1%.

The general compound interest equation is given as:

Formula:

A = P(1 + r/n)^nt

A = final amount or future value

P = initial principal balance

r = interest rate

n = number of times interest applied per time period

t = number of time periods elapsed

Compounding interest involves computing interest on both the principal and the accumulated interest.

On the other hand, the simple interest method does not compute interest on accumulated interest.

Thus, the correct representation of the value 0.031 is the compound interest rate as 3.1%.

Learn more about the compound interest at https://brainly.com/question/24274034

#SPJ1

1. <1 and <7 are supplementary.

2. <1 and <3 are supplementary.

3. <2 and <6 are congruent angles.

Supplementary angles are two angles that add up to 180 degrees. In other words, they are angles that "complete" each other, forming a straight line. If two angles are supplementary, they are said to be "supplementary to each other."

Congruent angles are angles that have the same measure. They are written with the symbol "≅" and are read as "is congruent to." Two angles are congruent if they have the same degree measure.

1. Angles 1 and 7 add up to 180 degrees, therefore, they are supplementary.

2. Also, angles 1 and 3 are supplementary.

3. Angles 2 and 6 are corresponding angles, therefore, they are congruent angles.

Learn more about congruent and supplementary angles on:

https://brainly.com/question/17302437

#SPJ1

Using the distance formula we can conclude that the measure of line AB is 64 units.

Distance is a measurement of how far apart two things or points are, either numerically or occasionally qualitatively.

The distance can refer to a physical length in physics or to an estimate based on other factors in common usage.

Learn how to apply the Pythagorean theorem to find the distance between two points using the distance formula.

The Pythagorean theorem can be rewritten as d=(((x 2-x 1)2+(y 2-y 1)2) to calculate the separation between any two locations.

So, the formula is:

d = √(x2-x1)² + (y2-y1)²

Now, insert values as follows:

d = √(x2-x1)² + (y2-y1)²

d = √(10-2)² + (1-9)²

d = √(8)² + (-8)²
d = √64+64

d = √128

d = 64 units

Therefore, using the distance formula we can conclude that the measure of line AB is 64 units.

Know more about the distance formula here:

https://brainly.com/question/661229

#SPJ1

The cups of smoothie mixture should be fruit is 2.4

To find how many cups of the smoothie mixture should be fruit when 4 cups of smoothie are to be made, we can use proportions.

Let's call the number of cups of fruit needed x.

So, we have

x = percentage of fruit * number of cups

Substitute the known values in the above equation, so, we have the following representation

x = 60% * 4

Evaluate

x = 2.4

Hence, 2.4 cups of the smoothie mixture should be fruit to make 4 cups of smoothie with a 60% fruit and 40% water ratio.

Read more about percentage at

https://brainly.com/question/24877689

#SPJ1

The surface area of the cylinders are 565.2 square yards and  395.64 square cm

The formula for calculating the surface area of a cylinder is expressed as:

S = 2πr(r+h)

where

r is the radius

h is the height

1) Given that r = 6yd and h = 9yd

S = 2(3.14)6(6+9)

S = 565.2 square yd

Hence the surface area of the cylinder is 565.2 square yards

2) Given that r = 3cm and h = 18cm

S = 2(3.14)3(3+18)

S = 395.64 square cm

Hence the surface area of the cylinder is 395.64 square cm

Learn more on surface area of cylinder here: https://brainly.com/question/27440983

#SPJ1

Answer: The first answer

Step-by-step explanation:

x commision/15,000 = $360 comission/4500

===================================================

Explanation:

The five number summary is

in that exact order.

A five number summary of 1,2,8,20,21 means:

The IQR (interquartile range) is the distance from Q1 to Q3

IQR = Q3-Q1

IQR = 20-2

IQR = 18

The lower fence (L) is then calculated like so

L = Q1 - 1.5*IQR

L = 2 - 1.5*18

L = -25

If any values are smaller than this lower fence of -25, then they are considered small outliers. But we know that min = 1 is the smallest value. This means we do not have small outliers.

Now onto the upper fence (U)

U = Q3 + 1.5*IQR

U = 20 + 1.5*18

U = 47

If any values are larger than 47, then they are considered large outliers. But we know that max = 21 is the largest value. This means we do not have large outliers.

In summary, all of the data values are between min = 1 and max = 21, which guarantees they are definitely in the interval between L = -25 and U = 47.

This is why there are  no outliers in this data set.

The area of the piston is 0.00065625 m².

A force can push or pull anything. An object can change its speed, direction of motion, or shape when a force is applied to it.

The amount of force acting on a given area is measured by its pressure.

Using the formula pressure = force area, pressure may be computed. As a result, a force exerted across a smaller area will result in more pressure.

Given that, force is applied to the top of a piston = 210N

And the force produces pressure = 320 kPa = 320,000 Pa

We know that, pressure = force/ area

So that, Area = force/ pressure

Area of Piston = 210 / 320,000 Pa

Area of Piston = 0.00065625 m²

So that The area of the piston is 0.00065625 m².

To learn more about force, area and pressure visit:

brainly.com/question/13327123

#SPJ1

Answer:

I Also need the answer plese helep ussss

Step-by-step explanation:

The solution to the given fraction polynomial is expressed as; (x - 4)/(x + 4)

The polynomial fraction expression is;

[(6x² - x - 1)/(3x² + 25x + 8)] * [(x² + 4x - 32)/(2x² + 7x - 4)]

Let us reduce each of the terms to their factors;

6x² - x - 1 = (3x + 1)(2x - 1)

3x² + 25x + 8 = (3x + 1)(x + 8)

x² + 4x - 32 = (x - 4)(x + 8)

2x² + 7x - 4 = (2x - 1)(x + 4)

Thus, we now have;

[(3x + 1)(2x - 1)/((3x + 1)(x + 8))] * [((x - 4)(x + 8))/(2x - 1)(x + 4))]

Common terms will cancel out to get;

(x - 4)/(x + 4)

Read more about Polynomial Fractions at; https://brainly.com/question/21191537

#SPJ1

Answer:

x = 2

Step-by-step explanation:

7 [tex]\frac{1}{3}[/tex] x - 5 [tex]\frac{1}{2}[/tex] = 4x + 1 [tex]\frac{1}{6}[/tex] ( change mixed numbers to improper fractions )

[tex]\frac{22}{3}[/tex] x - [tex]\frac{11}{2}[/tex] = 4x + [tex]\frac{7}{6}[/tex]

multiply through by 6 ( the LCM of 3, 2, 6 ) to clear the fractions

44x - 33 = 24x + 7 ( subtract 24x from both sides )

20x - 33 = 7 ( add 33 to both sides )

20x = 40 ( divide both sides by 20 )

x = 2

Five number summary consist of b. First quartile, a. Standard deviation, c. Minimum value, e. Maximum value i Mode, h. Variance, f. Third quartile, j. Mean, g. interquartile range, d. median.

If the data are graphed symmetrically, the distribution demonstrates 0% skewness regardless of how long or fat the tails are. When the median of a data set is utilized, 50% of the data points in the collection have values lower than or equal to the median, and 50% of them have values greater than or equal to the median. The middle score in the set is known as the median. The first step in calculating the median is to order the data points from smallest to greatest. The median in an odd-numbered set will be the value that falls exactly in the middle of the list. You must determine the average of the two middle numbers in a set of even numbers. The average is determined by summing up each value individually and dividing that sum by the total number of observations.

To know more about median here

brainly.com/question/26940257

#SPJ4

Answer:

Step-by-step explanation:

v=(4/3)*pi*r^3

100=(4/3)*pi*r^3

r=2.879

The arrangement and simplification of like term gives  1/4 x + 3/4 x - 1/2 x + 1 - 2/3.

The term "like terms" in algebra refers to terms that have the same variable raised to the same power. Only the numerical coefficients can vary in terms that are similar to algebra.

Given:

Expression: 1/4 x + 1 + 3/4 x -2/3 - 1/2 x

As, like terms have variables then

1/4 x + 3/4 x - 1/2 x + 1 - 2/3

Now, applying the operation as

= x(1/4 + 3/4- 1/2) + 1 - 2/3

= x(4/4 - 2/4) + 3/3 - 2/3

= 2/4 x + 1/3

= 1/2 x + 1/3

Learn more about Like term here:

https://brainly.com/question/29169167

#SPJ1

The percent change from the first value to the second is 20%.

Suppose the value of which a thing is expressed in percentage is "a'

Suppose the percent that considered thing is of "a" is b%

Then since percent shows per 100 (since cent means 100), thus we will first divide the whole part in 100 parts and then we multiply it with b so that we collect b items per 100 items(that is exactly what b per cent means).

Thus, that thing in number is

[tex]\dfrac{a}{100} \times b[/tex]

Given;

The first number= 48

The second number= 60

Now, difference=60-48=12

Here,

=(60-48) x 100/48

=1200/48

=20

Therefore, the percentage change will be 20%.

Learn more about percent here:

https://brainly.com/question/11549320

#SPJ9

The number of cups of flour that Diego uses more than Akeem will be  4 ½.

An answer to a formula is any variable value that fulfills the equal outcomes, that is, it tends to make the Left Hand Side (LHS) and Right Hand Side (RHS) of the formula equal. To solve an equation, you must locate the feasible solution) to that formula.

Akeem, Diego, and Lily are each making banana bread. Lily uses 3 ½ cups of flour more than Akeem. She uses 1 cup of flour less than Diego.

L = 3 ½ + A      ...1

L = D - 1            ...2

From equations 1 and 2, then we have

D - 1 = 3 ½ + A

D = 4 ½ + A

The number of cups of flour that Diego uses more than Akeem will be  4 ½.

More about the solution of the equation link is given below.

https://brainly.com/question/22613204

#SPJ9

Answer:

t-test is less likely to commit an error. ANOVA has more error risks. Sample from class A and B students have given a mathematics course may have different mean and standard deviation.

Step-by-step explanation:

have a nice day

Answer:

x{27}=69+420

Step-by-step explanation:

Using the distance, time, and speed formulas, Nicholas could only achieve the distances listed in the given times for:

The distance, time, and speed formulas show that:

Constant driving rate (Speed) = 55 mph

Distance       Time        Speed
165 miles     3 hours    55 mph (165/3)

240 miles   4 hours     60 mph (240/4)

330 miles   6 hours     55 mph (330/6)

504 miles   9 hours     56 mph (504/9)

Thus, using the distance, time, and speed formulas, we can conclude that Nicholas could not achieve the distances in B and D but only in A and C.

Learn more about the distance, time, and speed formulas at https://brainly.com/question/26862717

#SPJ1

The change in temperature each hour is 6 °C.

Unit rate is the amount of one quantity for a unit amount of the other quantity.

In other words it compares 1 unit of some quantity with different amount of another quantity

Given that,

In a lab, a substance was cooled by 18 °C over a period of 3 hours at a constant rate.

Since the rate at which the substance is cooling down is constant,

Amount by which substance cooled down in 3 hours = 18 °C

Amount by which substance cooled down in 1 hour = 18 °C / 3 = 6 °C, which is the unit rate.

Hence the unit rate of the change in temperature is 6 °C per hour.

Solve more problems of Unit Rate here :

https://brainly.com/question/29113088

#SPJ9