A 40.0 kg beam is attached to a wall with a hi.nge and its far end is supported by a cable. The angle between the beam and the cable is 90°. If the beam is inclined at an angle of θ = 31.0° with respect to horizontal.
The horizontal component of the force exerted by the hi.nge on the beam = 8.662×101 N
What is the magnitude of the force that the beam exerts on the hi.nge?

option (B) is correct answer.

What is acceleration due to gravity ?

Gravitational acceleration is the acceleration experienced by an object due to gravity. Its SI unit is m/s2. It is vector magnitude because it has both magnitude and direction.  The standard value of g on the surface of the earth at 0m above sea level is 9.8m/s2. Suppose an object [test mass (m)] is moved from a height "h" above the ground [source mass (M)], and as it approaches the ground it begins to move downwards, increasing its velocity. We know that the velocity of an object changes only under the action of a force. In this case the force is provided by gravity.

Under the action of gravity, the object begins to accelerate towards the center of the earth. The center of the Earth is at a distance "r" from the test mass. Then ma = GMm/r2 (applies the equivalence principle)

⇒ a = GM/r2 . . . . . . (1)

The above acceleration is due to the earth's gravitational pull, so we call it the gravitational acceleration and it does not depend on the test mass. The value near the ground is 9.8 ms-2. Therefore the acceleration due to gravity (g) is given by = GM/r2.

The dancer relies the position of center  center of gravity is determined by the Positions of her arms and legs.

Hence option (B) is correct answer.

To learn more about acceleration due to gravity ,click the given link;

brainly.com/question/25749514

#SPJ4

The locomotive draws a current of 40,000 amps.The train can go 5,000  km before 1% of the energy is lost in the wire.

What is energy ?

Energy is the ability to do work.  It can be used to power machines and other devices, generate electricity, or heat and light our homes. Energy is also a measure of how much work can be done in a given time. It is measured in Joules (J).

The current drawn by the locomotive is given by I = V/R.

where V is the potential difference between the wire and track and R is the resistance of the wire (in this case 0.25 ohms/km).

Therefore, the current drawn by the locomotive is

I = 10,000 V/0.25 ohms/km = 40,000 A

The distance from the power plant at which 1% of the energy is lost in the wire is given by d = R*I²/2V

where R is the resistance of the wire, I is the current drawn by the locomotive, and V is the potential difference between the wire and track. Therefore, the distance from the power plant at which 1% of the energy is lost in the wire is

d = 0.25 ohms/km * (40,000 A)²/2 * 10,000 V = 5,000 km

This means that the locomotive can travel up to 5,000 km from the power plant before 1% of the energy is lost in the wire.

To learn about more energy .

brainly.com/question/13881533

#SPJ4

The difference between steps and stairs can be seen in how they are comparable to and different from using a ramp to enter a building. In contrast to a stair, which has two or more risers, a step is the portion of a movement that elevates or descends by simply one riser.

Stairs can be built anywhere there is a height difference between landings, and they only occupy a small amount of space. However, ramps require significantly more space to allow for the proper climb.

It is more efficient to climb steps than than a ramp since it requires less energy. Ramps that are as steep as a standard flight of stairs are also challenging to climb. Because it requires more distance (and walking time) to reach the same height as steep stairs, very shallow slopes require overall more energy.

To know more about ramp and stairs, refer

https://brainly.com/question/8678172

#SPJ1

Answer:

50 seconds.

Explanation:

See attached photo.

This question can be solved by simply setting up cross-multiplication and understanding metrics.

• The bathroom is 100 meters away.

• One can only walk at 2 meters per second.

• So essentially we can ask the question like this:

Please see the image attached and let me know if this helped!!!

The energy needed for change 10 grams of water is 5.7.

Energy is the ability to perform work in physics. It could exist in several different forms, such as potential, kinetic, thermal, electrical, chemical, radioactive, etc.

Energy is always assigned based on its nature once it has been transmitted. Thus, heat transmitted may manifest as thermal energy while work performed may result in mechanical energy.

Motion is a property of all energy types. For instance, if a body is moving, it possesses kinetic energy. Even while at rest, a tensioned object like a spring or bow has the ability to move; this is because of its design, which includes potential energy.

Therefore, The energy needed for change 10 grams of water is 5.7.

To learn more about Energy, refer to the link:

https://brainly.com/question/1932868

#SPJ1

Option 4 is the correct answer .

What is lens ?

A lens is a transparent material, usually circular, with two polished surfaces, one or both of which are curved, either convex (curved) or concave (deep). Curves are almost always spherical. That is, the radius of curvature is constant. Lenses have the valuable property of producing images of objects in front of us. Singlet lenses are used in eyeglasses, contact lenses, pocket magnifiers, projection condensers, signal lights, viewfinders, and simple box cameras

To learn more about lens ,click the given link;

https://brainly.com/question/28039799

#SPJ4

The rack can be tilted to a maximum of 8.880 before falling over.

What is acceleration due to gravity ?

Gravitational acceleration is the acceleration experienced by an object due to gravity. Its SI unit is m/s2. It is vector magnitude because it has both magnitude and direction.  The standard value of g on the surface of the earth at 0m above sea level is 9.8m/s2. Suppose an object [test mass (m)] is moved from a height "h" above the ground [source mass (M)], and as it approaches the ground it begins to move downwards, increasing its velocity. We know that the velocity of an object changes only under the action of a force. In this case the force is provided by gravity.

Under the action of gravity, the object begins to accelerate towards the center of the earth. The center of the Earth is at a distance "r" from the test mass. Then ma = GMm/r2 (applies the equivalence principle)

⇒ a = GM/r2 . . . . . . (1)

The above acceleration is due to the earth's gravitational pull, so we call it the gravitational acceleration and it does not depend on the test mass. The value near the ground is 9.8 ms-2. Therefore the acceleration due to gravity (g) is given by = GM/r2.

To learn more about acceleration due to gravity ,click the given link;

brainly.com/question/25749514

#SPJ4

All of your clocks tick at the same rate, and your brain experiences the same effects of time that your clock does.

It is difficult to see your own clocks slowed since a clock that is not slowed down must be used to measure it.

As a result, an astronaut sees the clock and the passage of time as usual. The time on Earth appears to go more slowly in the astronaut's perspective than it does on Earth. The ship appears to be in good condition (it doesn't move in relation to the astronaut), but everything else—including the distance system to stars in the direction of travel—seems to have been compressed. In just 5 years, an astronaut can travel to a star located 10 light years away using the following method: the star is closer to Earth in the astronauts' perspective.

The complete question is- Suppose an astronaut is moving relative to the Earth at a significant fraction of the speed of light. a. Does she observe the rate of her clocks to have slowed?

Learn more about system here-

https://brainly.com/question/11938296

#SPJ4

Answer:

Vegas for a week or two and I deserve it to me right next to me right next to me.

Explanation:

no exceptions

The percentage of the ratio of Vo/ Vmax is 83%

The [s] given has 5 km

The Vmax can be found using the Michaelis-Menten equation,

                     Vo / Vmax = [s] / km + [s]

where Vo is the initial velocity

           Vmax is the maximum velocity

The Michaelis-Menten equation can be rewritten as V = Kcat [enzyme] [S] / (Km + [S]). Kcat is equal to K2 and measures the number of substrate molecules that the enzyme "turns over" per second. The unit of Kcat is 1/sec.

Let us substitute the known values in the above equation, we get

                     Vo / Vmax = 5 km / km + 5km

                                        = 5 km / 6 km

                                        = 0.833 x 100

                                        = 83.3 %

Therefore, the percentage of Vo/Vmax is 83.3 %

Learn more about the Michaelis-Menten equation in

https://brainly.com/question/20912949

#SPJ4

The full question is

when [s] = 5 km, what percentage (%) of Vo/Vmax has been reached?

Through a wire loop, a magnet moved.

Any substance that can draw iron and create a magnetic field around itself is a magnet. By the end of the 19th century, every known element and a number of compounds had been examined for magnetism and it had been found that they all exhibited some type of magnetic property.

The earliest known users of this mineral are the ancient Greeks, who gave it the nickname "magnet" for its capacity to draw other objects made of the same substance as well as iron.

To know more about magnet visit:

https://brainly.com/question/2841288

#SPJ1

Aluminum has an atomic number of 13. This implies that the Al3+ ion contains the same number of electrons as (13-3 = 10) electrons.

A cation is a positively charged ion, to be more precise. An atom must lose an electron in order to become positively charged. The electronic configurations of an element with atomic number 13 are 2, 8, and 3. Thus, the atom of this element has three electrons in its valence shell. This atom has the valence M. The second element in the periodic table's thirteenth column is aluminum. It is categorized as a "poor metal" and a post-transition metal. 13 protons and 13 electrons make up an aluminum atom. The outer shell has three valence electrons.

Learn more about valence here-

https://brainly.com/question/12744547

#SPJ4

Answer:

Trabajo = Δ E

Explanation:

Podemos escribir esta declaración como una ecuación que hace que sea muy fácil ver la relación: Trabajo = Δ E, donde E es energía, y la letra griega Delta significa ‘cambio en’. Entonces leemos esto como: trabajo = cambio de energía. Esto nos ayuda a comprender por qué no se realiza ningún trabajo en una pared que no se mueve.

The work- energy theorem states that the work done by the sum of  forces acting on an object is  equal to  the change in the kinetic energy of the object.

According to work -energy theorem, the force resulting in a work done which is equal to the change in kinetic energy of the object. When a force applied on a body results in a displacement of the body, it is said to be work done on the body.

Kinetic energy of an object is the energy generated by virtue of its motion. It related to the mass and velocity as written below:

Ke  = 1/2 mv²

Let, Vi be the initial velocity and Vf be the final velocity, then the change in kinetic energy is written as:

ΔKe =  1/2 mVf² -  1/2 mVi²

According to wok energy theorem, the work done is equal to the this kinetic energy change.

Hence, W = ΔKe.

Find more on kinetic energy:

https://brainly.com/question/999862

#SPJ2

Answer:

A fixed pulley changes the direction of the force you exert by pulling, so you can pull down to move an object up.

Explanation:

By decreasing the work done. A simple fixed pulley reduces the amount of work needed to lift an object by changing the direction of the force applied, so the same force can be used to lift the object with less effort.

Force is the action of one object upon another. It is a vector quantity, meaning it has both a magnitude and a direction. Forces can cause an object to accelerate, decelerate, or remain in a constant velocity. Examples of forces include gravity, friction, tension, and electric and magnetic forces. The study of forces and their effects is known as mechanics. Forces can act in pairs, such as the forces between two interacting objects, or individually, such as the force of gravity acting on an object. In physics, the force is measured in Newtons (N), and the magnitude of a force is measured in joules (J). Forces can cause changes in the shape or motion of objects.

To learn more about force
https://brainly.com/question/12970081
#SPJ1

In the equation ω=ω0+αt, the time elapsed from when the angular velocity equals ω0 until the angular velocity equals ω.

Option C is correct.

Angular velocity is a vector quantity, expressed as the angular velocity or rotational speed of an object and the rate of change of angular displacement that specifies the axis about which the object rotates.

Angular velocity is a vector quantity and has both magnitude and direction. This direction is the same as the direction of angular displacement that defined the angular velocity.

For example, a roulette ball on a roulette wheel, a racing car on a circular track, and a Ferris wheel are examples of angular velocity. Furthermore, the angular velocity of an object is the angular displacement of the object in time.

Question is incomplete . Missing options are:

In the equation ω=ω0+αt, what does the time variable t represent? Choose the answer that is always true. Several of the statements may be true in a particular problem, but only one is always true.

A. the moment in time at which the angular velocity equals ω0

B. the moment in time at which the angular velocity equals ω

C. the time elapsed from when the angular velocity equals ω0 until the angular velocity equals ω

Learn more about angular velocity:

brainly.com/question/20432894

#SPJ4

A) 5.0 C charge must pass by a point in a wire in 10 s for the current in the wire of 0.50 A current.

Current is the flow of electric charge per unit time. It is measured in amperes (A). The formula for current is:

I = Q / t

Where I is the current, Q is the charge, and t is the time.

In this case, the current is given as 0.50 A, and the time is given as 10 s. To find the charge that must pass by a point in a wire, we can rearrange the formula:

Q = I * t

Therefore, Q = 0.50 A * 10 s = 5.0 C

So, the charge that must pass by a point in a wire in 10 seconds for the current in the wire to be 0.50 A is 5.0 C.

To know more about  current  click below:

https://brainly.com/question/10254698#

#SPJ4

She does 818J work, which is the transfer of energy to or from an item by the application of force along a displacement.

Work is the energy that is transferred when a force acts on an item and moves it. The sum of the force's magnitude, the displacement's magnitude, and the angle's cosine determines the work that a force produces on an item.

Work is force transferred across a distance. Examples of labor include pushing a car up a hill, drawing a captive helium balloon down, and raising an object against the gravitational attraction of the Earth. The mechanical expression of energy is work. The

To know more about work visit:

https://brainly.com/question/18094932

#SPJ1

On the bolt, F2 force will exert the most torque. Torquing a bolt involves using a wrench. There is no difference in the magnitude of forces F1 through F6.

Vector and scalar quantities both use magnitude as a common denominator. Scalar quantities are understood to be those that have only magnitude, according to their definition. Vector quantities, on the other hand, are those that have both magnitude and direction. Magnitude can be used in a number of different contexts.

where the force is being applied From the bolt's centre of rotation, Fi (and F) are separated by a distance of d. Moment of force equals torque (Rotational domain equivalent of Force)

t1 = (d)(Fcos(theta))=0.86dF

t2 = (2d)(f) = 2dF

t3=(3d)(F)(cos(theta) = 1.5dF

Learn more about force here

https://brainly.com/question/13191643

#SPJ4

Change in momentum before collision 12000Kgm/s and velocity of van after collision is 3m/s.

According to the rule of conservation of momentum, absent an external force, the combined momentum of two or more bodies operating upon one another in an isolated system remains constant. As a result, momentum cannot be gained or lost. According to the principle of momentum conservation, momentum is only modified by the action of forces as they are outlined by Newton's equations of motion; momentum is never created nor destroyed inside a problem domain.

Momentum before collision=> mava + mbvb

                                             => (1200 x 10) + (3200 x 0)

                                             => 12000Kgm/s

Momentum after collision => 2400 + 3200 v(after)

       Law of conservation of momentum

    12000 = 2400 - 3200 v (after)

=> Velocity after collision acquired by van = (12000-2400)/3200

                                                                     => 3m/s

Learn more about momentum here:

brainly.com/question/2141713

#SPJ1

The dc impedance of the electrode, assuming that it behaves as an ideal capacitor is infinite.

What is an ideal capacitor?

The ideal capacitor has no resistance and, as a result, doesn't lose any energy while in use. Just capacitance exists in it. The dielectric does not degrade in a ideal capacitor.

Using merely its resistance, an element in a DC circuit can be characterized. While an inductor's resistance in a DC circuit is viewed as a short connection (zero resistance), a capacitor's resistance is viewed as an open connection (infinite resistance)

In contrast to an inductor, which has zero impedance at DC and approaches infinity at infinite frequencies, capacitors have infinite impedance at DC and approach zero as frequency approaches infinity.

To learn more about ideal capacitor use link below: https://brainly.com/question/14839711

#SPJ4

Answer:d

Explanation: lama lama

The speed of light in a vacuum is approximately 3× 10⁸ meters per second (m/s).

Light is a form of electromagnetic radiation that our eyes can detect. It is a fundamental phenomenon in physics and plays a crucial role in our understanding of the universe. Light consists of tiny packets of energy called photons that travel as waves. It exhibits both wave-like and particle-like properties, known as wave-particle duality.

Speed: In a vacuum, light travels at a constant speed of approximately

299,792,458 meters per second (  3× 10⁸ m/s).

Wavelength: Light has a property called wavelength, which is the distance between two consecutive peaks (or troughs) of a light wave. Different colors of light have different wavelengths.

Frequency: The frequency of light is the number of wave cycles that pass a point in one second. It is inversely proportional to the wavelength.

Spectrum: The electromagnetic spectrum includes a wide range of electromagnetic waves, with visible light forming only a small part of it. The spectrum includes radio waves, microwaves, infrared radiation, visible light, ultraviolet radiation, X-rays, and gamma rays.

Colors: Visible light is the portion of the electromagnetic spectrum that our eyes can perceive. It consists of different colors, each corresponding to a specific range of wavelengths. These colors include red, orange, yellow, green, blue, indigo, and violet.

Reflection and Refraction: Light can bounce off surfaces (reflection) or change direction when passing through different mediums (refraction).

Interference and Diffraction: Light waves can interfere with each other, leading to patterns of constructive and destructive interference. Diffraction is the bending of light waves as they encounter obstacles or pass through narrow openings.

Polarization: Light waves can also be polarized, meaning their oscillations occur in a particular plane. Polarized sunglasses, for example, can block certain orientations of light waves.

Quantum Nature: Light exhibits both wave-like and particle-like behavior. In certain situations, it behaves as discrete packets of energy called photons.

Propagation: Light can travel through a vacuum (empty space) as well as through various materials, though its speed may change depending on the medium.

Light has a profound impact on various fields, including physics, astronomy, biology, and technology. Our understanding of light and its properties has led to the development of lasers, fiber optics, cameras, telescopes, and countless other applications that shape modern society.

To know more about light

https://brainly.com/question/28913766

#SPJ2

Answer: The wheel will travel 102.72 meters if it completes 32 revolutions with a radius of 0.8 meters. ✅

Explanation:

A rolling wheel will travel a certain distance when it completes a certain number of revolutions. To calculate the distance, you need to know the number of revolutions and the radius of the wheel.

In this case, the wheel completed 32 revolutions and the radius is 0.8 meters. To calculate the distance, we will use the formula:

Distance = 2 * pi * radius * number of revolutions

So the distance this wheel will travel is:

Distance = 2 * 3.14 * 0.8 * 32

Distance = 102.72 meters

So the wheel will travel 102.72 meters if it completes 32 revolutions with a radius of 0.8 meters.

The star with a right ascension of 14h 05m and a declination of +65 degrees is the star Gamma Cassiopeiae.

It is in the constellation of Cassiopeia,this star is approximately 38 light-years away from Earth and is a yellow-white supergiant of spectral type F2. It is one of the brightest stars in the night sky and can be visible to the unaided human eye. Gamma Cassiopeiae is a variable star, meaning its brightness changes over time, and it is classified as an alpha Cygni variable.

It is also known as Navi, which is derived from the Arabic word for "the new one."

Read more about astronomy :

https://brainly.com/question/24416609

#SPJ4

R = I/A, Resistance is inversely proportional to the circular cross section and directly proportional to the length of a wire. Therefore, the resistance is unaltered. The correct choice is c.

Additionally, the Greek uppercase letter omega is used to denote the resistance unit, which is the ohm. Additionally, the voltage applied across a specific resistor and the current passing through it affect the resistance. Resistance is a unit of measurement for the resistance to current flow in a certain electrical circuit. The area of a 3D object's sliced cross section, like a pipe, is known as the cross sectional area. The cross sectional area for the top portion of the sliced component will be determined when a pipe is cut perpendicular to its longest axis.

Learn more about resistance here

https://brainly.com/question/29427458

#SPJ4

Q and w are both zero. Option C provides the right response. When the heat is expelled from the system, the unit of q will be negative.

On the other hand, if the system is able to absorb the heat, the unit of q will be positive. The system has an adiabatic wall if no heat is taken in from the environment yet work is still done on the system. A thermal barrier known as an adiabatic wall restricts heat passage from one side to the other. The system's absorption of heat is positive. Heat that is emitted into the environment is harmful. Work being done on the system is showing promise.

Learn more about adiabatic here-

https://brainly.com/question/11938296

#SPJ4

The torque about the axis of rotation on the left produced by force F1onB is 600 Nm and the torque about the axis of rotation on the left produced by force F2onB is also 600 Nm. Force F3onB must be exerted at a distance of 0.5 m from the axis of rotation to balance the torques produced by F1onB and F2onB.

F1onB Torque: 600 Nm

F2onB Torque: 600 Nm

F3onB Distance: 0.5 m

1. To determine the torque about the axis of rotation on the left produced by force F1onB, we need to calculate the moment arm. The moment arm is the perpendicular distance from the axis of rotation to the line of action of the force. The moment arm for F1onB is 0.5 m, so the torque produced by F1onB is 600 Nm (F1onB x Moment Arm).

2. To determine the torque about the axis of rotation on the left produced by force F2onB, we need to calculate the moment arm. The moment arm for F2onB is 0.5 m, so the torque produced by F2onB is also 600 Nm (F2onB x Moment Arm).

3. To determine the distance from the axis of rotation at which F3onB must be exerted to balance the torques produced by F1onB and F2onB, we need to use the equation Torque = Force x Moment Arm. Since the total torque must equal 0, we can set up the following equation: 600 Nm + 600 Nm + (F3onB x Moment Arm) = 0. Solving for the Moment Arm, we get Moment Arm = -0.5 m, which is the distance from the axis of rotation at which F3onB must be exerted to balance the torques produced by F1onB and F2onB.

learn more about torque here

https://brainly.com/question/28220969

#SPJ4

This question focuses on the element shown in Figure P1.24 I, with a voltage of 10 V and current of 2e A.

The goal is to calculate the power of the circuit element and the total energy transferred between t= 0 and t= [infinity]. To determine if this energy is absorbed or supplied by the element, calculations must be done. First, the power of the circuit element can be calculated by multiplying the voltage and current together.

This yields a power of 20e W. Next, the energy transferred between t= 0 and t= [infinity] can be found by integrating the power over that time interval. This yields an energy of 20e Joules. Finally, to determine if the energy is absorbed or supplied by the element, the sign of the power must be checked. In this case, the power is positive, so the element is supplying the energy.

The index of refraction of the gem is 1.54.

The index of refraction quantifies how a light beam deflects as it passes through various materials.

By dividing the speed of light at a specific wavelength in vacuum space by the speed of light in that medium, the refractive index is determined.

The speed of light in gem is = 1.95 × 10⁸ m/s

The speed of light in vacuum = 3 × 10⁸ m/s.

The index of refraction of that gem = (speed of light in vacuum/speed of light in that medium)

= (3 × 10⁸ m/s)/(1.95 × 10⁸ m/s)

= 1.54.

Learn more about  index of refraction here:

https://brainly.com/question/23750645

#SPJ1

Becomes positively charged: If a negatively charged rod is held near an uncharged metal ball, the metal ball

What is metal ball ?

A metal ball is a spherical object made of metal, typically used in engineering and construction. Metal balls are often used as components in mechanical systems such as bearings, valves, and locks, as well as in arts and crafts.

They can also have decorative purposes, such as in furniture or jewelry. Metal balls are available in a variety of metal alloys and sizes, and can be machined, stamped, cast, or formed into shapes. Metal balls are often used to reduce friction in machines, as well as to transfer energy from one part of a system to another.

To learn about metal ball .

brainly.com/question/28544002

#SPJ4