A 75.0 kg person stands on a analog scale in an elevator that accelerates upwards from rest to 30.0 m/s in 2.00 seconds.
A.) Calculate the scale reading in Newtons (The scale exerts an upward force on him equal to its reading.)
B.) Calculate the scale reading compared with his weight.
C.) What is UNREASONABLE about this? (CHOOSE ONE)
-The time of 2 seconds is unreasonable.
-The final speed is too small for an elevator.
-It is unreasonable that an elevator carries a 75 kg person.
-There is nothing unreasonable.
-The acceleration is much higher than any standard elevator.

Normally, Newtons are used to measure the gravitational force (N).

When two mass-containing objects are in close proximity to one another, a force of some sort is produced. It is pointed in the direction of the larger object's centre and has a magnitude that is dependent on the masses of the two objects and their separation. The force needed to accelerate a mass of one kilogram at a pace of one meter per second squared is known as the Newton (N), and it is represented by the symbol N. Gravitation is a significant force in many branches of research and engineering, including physics, astronomy, and aerospace, and it may be measured using a variety of tools, such as a spring scale or a balance.

Learn more about significant force here:

https://brainly.com/question/29897437

#SPJ4

The planet with the hottest temperature is Venus.

In solar system, Venus is the second planet from the Sun and is often called Earth's sister planet due to their similar size and composition.

However, Venus has an extremely thick atmosphere made up of carbon dioxide and nitrogen, which causes a greenhouse effect that traps heat from the Sun.

This results in surface temperatures reaching up to 864 degrees Fahrenheit (462 degrees Celsius), making it the hottest planet in our solar system. Despite being closer to the Sun, Mercury, the first planet, does not have as high of a temperature due to its lack of an atmosphere to trap heat.

To know more about Venus here:

https://brainly.com/question/24969671#

#SPJ11

Answer:

Explanation:

To calculate the height of the mercury in the tube above the surface in the trough, we can use the following formula:

h = (P - P₀) / ρg

where h is the height of the mercury column, P is the pressure at the bottom of the tube, P₀ is the atmospheric pressure, ρ is the density of the mercury, and g is the acceleration due to gravity.

Since the pressure at the bottom of the tube is due to the weight of the mercury column above it, we can also express P as P = ρgh, where h is the height of the mercury column in the tube.

Substituting this expression for P into the formula above, we get:

h = (ρgh - P₀) / ρg

Simplifying this expression, we get:

h = h - P₀ / g

Solving for h, we get:

h = P₀ / ρg

Substituting the given values, we get:

h = (1.0 x 10⁵ Pa) / (136000 kg/m³ x 9.81 m/s²)

h = 0.073 m

Therefore, the height of the mercury in the tube above the surface in the trough is approximately 0.073 meters.

The words that complete the blanks are momentum, decreased and increased.

Momentum is a property of an object that is moving and is defined as the product of its mass and velocity. Mathematically, momentum (p) is given by the equation:

p = m * v

where:

p = momentum

m = mass of the object

v = velocity of the object

Momentum is a vector quantity, which means it has both magnitude and direction. The direction of momentum is the same as the direction of the velocity.

Learn more about momentum:https://brainly.com/question/30677308

#SPJ1

Below is my activity log for  for a week starting from Monday, February 20th, 2023 to Sunday, February 26th, 2023:

Monday, February 20th:

7:00am: 30-minute yoga session at home

12:00pm: 1-hour strength training at the gym

6:00pm: 30-minute jog around the neighborhood

Tuesday, February 21st:

Wednesday, February 22nd:

Thursday, February 23rd:

Friday, February 24th:

Saturday, February 25th:

Sunday, February 26th:

Therefore, this week consisted of a mix of cardio, strength training, and flexibility exercises. The activities varied between indoor and outdoor, as well as group and individual workouts. The inclusion of different activities helps to keep things interesting and maintain motivation.

Learn more about  physical activities from

https://brainly.com/question/1744272

#SPJ1

The initial maxima speed for light with a 500 nm wavelength is 5 mm/s.

Hence, given the distance to a screen, the breadth of the slit, and the wavelength of the light, we can apply the equation y = L l / a to pinpoint the location of the initial diffraction minimum with in single slit diffraction pattern.

Its Type III dispersion is intended for applications such general carparks and streets where a larger illumination area is required. Type III lighting must be placed to one side of the area in order for it to illuminate the entire area. As a result, there's a filling light flow.

Distance between slits and screenD=3m

Distance between slits d=10 mm

Speed v=4 m/s

v β =5×10 −3 m/s

= 5 mm/s

To know more about slit diffraction visit:

brainly.com/question/29451443

#SPJ1

The type of radioactivity that has a negative charge is beta decay

Beta decay is a type of nuclear decay that occurs when an unstable atomic nucleus emits a beta particle. Beta particles are high-energy electrons or positrons that are ejected from the nucleus during the decay process. Beta decay can occur in two ways:

Beta decay can occur in isotopes of many elements, including carbon-14, which is used in radiocarbon dating, and iodine-131, which is used in nuclear medicine. Beta decay is also an important source of energy in nuclear power plants.

To know more about Beta Decay, visit:

https://brainly.com/question/27770519

#SPJ4

The minimum angle α that will allow the box to start sliding down the ramp is approximately 19.47 degrees.

Force of gravity pulling the box down the ramp,

F_gravity = m * g

F_gravity = 245.25 N

Normal force perpendicular to the ramp,

F_normal = m * g * cos(α)

F_normal = 25.0 kg * 9.81 m/s^2 * cos(α)

Since the box is at rest, the force of friction acting on the box is the static friction force,

F_friction = μ_static * F_normal

F_friction = 85.03 N * cos(α)

The force component of gravity acting down the ramp is,

F_gravity_parallel = m * g * sin(α)

F_gravity_parallel = 25.0 kg * 9.81 m/s^2 * sin(α)

Set up the inequality for the box to start sliding down the ramp:

F_friction ≤ F_gravity_parallel

0.350 * (25.0 kg * 9.81 m/s^2 * cos(α)) ≤ 25.0 kg * 9.81 m/s^2 * sin(α)

0.350 * cos(α) ≤ sin(α)

0.350 ≤ tan(α)

α ≥ tan^(-1)(0.350)

α ≥ 19.47 degrees

To know more about the coefficient of kinetic friction, here

brainly.com/question/13754413

#SPJ4

--The complete question is, A 25.0 kg box of textbooks rests on a loading ramp that makes an angle α with the horizontal. the coefficient of kinetic friction is 0.250, and the coefficient of static friction is 0.350. What is the minimum angle α that will allow the box to start sliding down the ramp?--

The correct answer is d) 20%. Approximately 20% of the Earth's surface is covered in snow and ice.

This includes the polar ice caps, glaciers, and sea ice. The majority of the ice and snow cover is found in the polar regions, where it plays an important role in the Earth's climate and affects global sea levels.

It's worth noting that the amount of ice and snow cover on the Earth's surface is constantly changing due to various factors, including changes in temperature and precipitation, as well as human activities such as deforestation and greenhouse gas emissions.

To know more about earth , visit:

https://brainly.com/question/12041467?referrer=searchResults

#SPJ4

The Richter scale is a logarithmic scale for measures the magnitude or intensity of an earthquake. It was developed in 1935 by Charles Richter and is used to measure the size of earthquakes all over the world.

The scale ranges from 0 to 10, with each level representing a ten-fold increase in ground shaking. The Richter scale is based on the amplitude of the seismic waves recorded on a seismograph.

These waves are used to accurately measure the size of an earthquake. The higher the magnitude of an earthquake, the more intense the shaking and the greater the damage it can cause.

The Richter scale is a valuable tool for studying earthquakes and assessing their potential to cause destruction.

It is also used to compare the size of different earthquakes and helps scientists to better understand how they form and how they can be managed.

To know more about  Richter scale,

https://brainly.com/question/24037139

#SPJ4

Using  >,<,>,<,is greater than, comma, is less than, comma or ==equals, the answer is 777700 kilograms < 60,000,000 grams (is less than).

Mathematical signs are used to represent mathematical operations and to show relationships between mathematical expressions. Some common mathematical signs include:

These signs allow us to perform arithmetic operations, compare numbers, and express mathematical relationships in a clear and concise way.

Learn more on mathematical signs here:https://brainly.com/question/25421984

#SPJ1

The correct question is:

Compare using >,<,>,<,is greater than, comma, is less than, comma or ==equals. 777 kilograms 60,000,000 gram

Potential energy is the term used to describe the energy that is stored in an electrical system as a result of the separation of positive and negative charges in the context of electric charges and batteries.

A 9-volt battery will result in a 9-joule increase in the potential energy of a single coulomb of charge.b. The potential energy of a 2 coulomb charge will increase by 18 joules with a 9-volt battery.c. A 9-volt battery will add 4.5 joules to the potential energy of 0.5 coulombs of charge.

d. The potential energy of a 3 coulomb charge will increase by 18 joules with a 6-volt battery.e. A 1.5-volt battery will add 3 joules of potential energy to a 2 coulomb charge.f. A 1.5-volt battery will boost the 0.5 coulombs of charge's potential energy by 0.75 joules.

g. A 12-volt battery will provide a 6 joule increase in the potential energy of 0.5 coulombs of charge.

Therefore, The energy that an object has as a result of its position or configuration is known as potential energy.

Learn more about potential energy here:

https://brainly.com/question/24284560

#SPJ4

Reductionism is a philosophical and scientific approach that seeks to explain complex phenomena in terms of simpler or more fundamental components.

Reductionism is a philosophical and scientific approach that seeks to explain complex phenomena in terms of simpler, more fundamental components or principles. It assumes that everything can be reduced to its basic building blocks, and that understanding these building blocks is sufficient to explain the behavior of more complex systems.

Reductionism has been a powerful tool for breaking down complex systems into simpler parts that can be studied and understood. It has been particularly useful in fields such as physics, where the behavior of complex systems can often be explained in terms of fundamental particles and forces. Reductionism has also been criticized for oversimplifying complex phenomena and ignoring the emergent properties that arise from interactions between components.

To learn more about Reductionism visit here:

brainly.com/question/28901579

#SPJ4

The planets revolve around the sun in the same direction, counterclockwise, when viewed from above the North Pole of the sun. This direction is also known as prograde motion.

There are some exceptions to this, however. Venus and Uranus have a retrograde rotation, meaning they rotate in the opposite direction to the other planets.

To know more about prograde motion , check out :

https://brainly.com/question/22921263

#SPJ4

In order to comprehend how objects move and accelerate, it is crucial to understand the idea of net force in physics. The interactions between objects that alter motion are known as forces. Thus option 1. B, 2. C 3. A 4. C

Part A: If the skateboarder is moving in the direction of the net force, they will keep moving in that direction. The skateboarder will slow down or perhaps halt if the net force is acting in the opposite direction of their speed.

The skateboarder will move in a direction between the two if the direction of motion and the net force are at an angle.

Part B: Newton's second law, F = ma, states that the skateboarder's acceleration is parallel to the direction of the net force. The acceleration and net force are proportionate and in the same direction.

Part C: This is a result of Newton's second law, which states that F = ma. The acceleration and the direction of the net force are directly related.

Part D: As the net force is what propels acceleration, if the skateboarder were instantly at rest, there would be no net force acting on them.

Therefore, When an object is subject to a net force that is not zero, the object will accelerate in that direction.

Learn more about force here:

https://brainly.com/question/18109210

#SPJ4

Answer:

if the object can sink it will sink but if the object can float it will float

According to the statement, the vapor pressure of the solution is 21.08 torr.

To solve this problem, we need to calculate the mole fraction of NaCl in the solution and use it to calculate the vapor pressure of the solution.

First, let's calculate the moles of NaCl and water:

moles NaCl = 90.0 g / 58.44 g/mol = 1.54 mol

moles water = 250.0 g / 18.015 g/mol = 13.88 mol

Next, let's calculate the mole fraction of NaCl:

mole fraction NaCl = moles NaCl / (moles NaCl + moles water) = 1.54 mol / (1.54 mol + 13.88 mol) = 0.1007

Now, we can use the following equation to calculate the vapor pressure of the solution:

P solution = X water × P water

where P water is the vapor pressure of pure water and X water is the mole fraction of water in the solution. Since the mole fraction of NaCl is 1 - X water, we can rearrange the equation to solve for P solution:

P solution = (1 - X NaCl) × P water

Plugging in the values, we get:

P solution = (1 - 0.1007) × 23.56 torr = 21.08 torr

Therefore, the vapor pressure of the solution is 21.08 torr.

Learn more about NACL solution:

https://brainly.com/question/28123588

#SPJ4

The length of the tube that would result in a fundamental frequency of 250 Hz is approximately 0.7 meters. Keep in mind that this is a simple model and the actual length of the human vocal tract is much more complex and varies between individuals.

The frequency of a wave is the number of complete cycles of the wave that occur in a unit of time, usually measured in hertz (Hz). It is a measure of how many oscillations or vibrations occur in a given time period.

The fundamental frequency of a tube is given by the formula:

f = v/2L

where v is the speed of sound in the air, and L is the length of the tube.

By rearranging the equation, we can find the length of the tube:

L = v/2f = (350 m/s) / (2 * 250 Hz) = 0.7 m.

To know more about  frequency, visit:

brainly.com/question/27151918

#SPJ4

The visible spectrum ranges from approximately 400 nanometers (nm) to 700 nm, with violet light having the shortest wavelength and red light having the longest wavelength.

The distance between two peaks or troughs in a wave is measured in wavelengths. The characteristics of electromagnetic radiation, such as light, radio waves, and X-rays, are frequently described using them. The wavelength of a wave can be used to calculate its energy, frequency, and velocity in physics. The frequency and energy of the wave increase with decreasing wavelength. The colors we perceive are caused by different wavelengths of light, with shorter wavelengths equating to blue and longer wavelengths relating to red. In disciplines like spectroscopy, astronomy, and telecommunications, an understanding of wavelengths is essential. In comparison to other types of electromagnetic waves, radio waves have the longest wavelengths. They range in size roughly from a few centimeters to many miles.

To know more about wavelengths, check out:

https://brainly.com/question/10750459

#SPJ4

The first National Hockey League (NHL) All-Star Skills Competition was held in 1990.

The National Hockey League (NHL) is a professional ice hockey league composed of 31 teams, 24 of which are based in the United States and 7 in Canada. The NHL is widely considered to be the premier professional ice hockey league in the world and is among the oldest North American sports organisations.

The league operates on a system of promotion and relegation, with the bottom teams in each division being required to compete in a qualifying tournament to retain their place in the league, while the top teams compete in the Stanley Cup Playoffs to determine the NHL champion.

The NHL regular season typically runs from October to April, with each team playing a total of 82 games. The league also holds an All-Star Game, which is a showcase of the league's best players and features various skills competitions. The NHL has a strong following and is popular both in North America and internationally.

To know more about National Hockey League, visit:

https://brainly.com/question/29359031

#SPJ4

The apparent path of the Sun, relative to the stars on the celestial sphere, over the course of a year. It is the orbit of the earth extended to the celestial sphere is called ecliptic.

The celestial sphere is an imaginary sphere that surrounds the Earth, used by astronomers to describe the positions and movements of celestial objects such as stars, planets, and galaxies. The concept of the celestial sphere was introduced by ancient Greek astronomers, who believed that the stars were fixed on a giant sphere that surrounded the Earth.

This sphere was thought to rotate around the Earth, creating the illusion of the stars moving across the sky. The celestial sphere is divided into 88 constellations, each containing stars that are visible from Earth. The celestial sphere has several important reference points, such as the celestial equator, which is the projection of Earth's equator onto the sphere, and the ecliptic, which is the path of the Sun across the sky throughout the year.

To learn more about Celestial sphere visit here:

brainly.com/question/13196153

#SPJ4

The tension on the string is 58.8N

What does a string's tension force mean?

The force communicated through a rope, string, or wire when two opposing forces draw on it is known as tension. The tension force pulls energy equally on the bodies at the ends and is applied along the entire length of the wire. Every physical object in contact with another one applies some force to that object.

The pull that is designated as tension is in that direction. As a result, the tension will point toward the string or rope and away from the mass. When a mass is hanging, the string pulls it upward, applying an upper force, which causes the tension to be on the upper side.

F = ma

F = 6kg * 9.8 m/s2

F = 58.8 N.

To learn more about tension use link below:
https://brainly.com/question/24994188

#SPJ4

Copernicus said that t he rotation of the Earth on its axis caused the daily motions in the heavens.

Copernicus proposed the heliocentric model of the solar system, which was a significant shift from the previously accepted geocentric model. He suggested that the sun was at the center of the solar system, and the planets, including Earth, revolved around it.

Copernicus also recognized that the Earth rotated on its axis, which explained the apparent daily motion of the stars in the sky. This was a fundamental insight that contributed to our understanding of the universe and paved the way for further discoveries in astronomy.

To know more about the solar system, here

brainly.com/question/12075871

#SPJ4

Both g/cc (grams per cubic centimeter) and kg/m3 (kilograms per cubic meter) are units of density, with the former being more commonly used in some industries such as mining and metallurgy.

To convert from g/cc to kg/m3, you can use the following conversion factor:

1 g/cc = 1000 kg/m3

Metallurgy is the branch of science and technology that deals with the extraction, refining, and processing of metals from ores. It is an essential field that has been around since ancient times, when humans first discovered the use of metals. Metallurgists work with metals such as iron, copper, gold, and silver, among others. Metallurgy has a wide range of applications, from creating durable tools and building structures to producing energy-efficient vehicles and electronics.

The process of metallurgy involves several stages, including mining, crushing, grinding, and separating the ore from the metal. Once the metal is extracted, it undergoes refining processes to remove impurities and improve its quality. Metallurgy also involves the study of the physical, chemical, and mechanical properties of metals, as well as their behavior under different conditions.

To learn more about Metallurgy visit here:

brainly.com/question/28303708

#SPJ4

The translational speed of the cylinder when it leaves the incline is 3.28 m/s.

To solve this problem, we need to use the conservation of energy principle, which states that the initial potential energy of the cylinder is equal to its final kinetic energy plus any remaining potential energy.

The initial potential energy of the cylinder is given by:

U_i = mgh

where m is the mass of the cylinder, g is the acceleration due to gravity, and h is the height of the incline. Substituting the given values, we get:

U_i = (2.53 kg)(9.81 m/s^2)(2.70 m) = 68.9 J

The final kinetic energy of the cylinder is given by:

K_f = (1/2)mv^2

where v is the translational speed of the cylinder when it leaves the incline. We also know that the cylinder will have rotational kinetic energy due to its rolling motion, given by:

K_rot = (1/2)Iω^2

where I is the moment of inertia of the cylinder and ω is its angular velocity. For a solid cylinder rolling without slipping, the moment of inertia is given by:

I = (1/2)mr^2

and the angular velocity is related to the translational speed by:

ω = v/r

Substituting these equations and simplifying, we get:

K_f + K_rot = (1/2)mv^2 + (1/4)mv^2

K_f + K_rot = (3/4)mv^2

Now, let's calculate the final potential energy of the cylinder. At the bottom of the incline, the cylinder will have a height of zero, so its potential energy will be:

U_f = mgh_cos(θ)

where θ is the angle of the incline. Substituting the given values, we get:

U_f = (2.53 kg)(9.81 m/s^2)(2.70 m)cos(46.8°) = 29.3 J

Using the conservation of energy principle, we can equate the initial potential energy to the final kinetic energy plus the final potential energy:

U_i = K_f + K_rot + U_f

Substituting the equations we derived earlier and simplifying, we get:

68.9 J = (3/4)mv^2 + 29.3 J

Solving for v, we get:

v = sqrt[(4/3)(68.9 J - 29.3 J)/m] = 3.28 m/s

Learn more about translational speed here

brainly.com/question/15443379

#SPJ4

In proton coupling, the J-value of a coupled proton is always less than that of the 'parent' proton. Therefore, since Proton A has a J-value of 3.0 Hz, Proton B will have a J-value less than 3.0 Hz.

Proton coupling is a type of nuclear magnetic resonance (NMR) technique used to determine the structure of molecules. It involves the use of radio frequency pulses to excite and measure the magnetization of protons in a sample. The technique is used to measure the distances between protons, as well as the tumbling motion of molecules, which can be used to assign chemical shifts and atom connectivity. Proton coupling can also be used to measure the concentration of protons in a sample, which can provide insight into the structure and properties of the molecules.

When two protons are coupled together, the J-value of the coupled proton is always less than that of the parent proton. This is because the total energy of the system is conserved, and the energy of the coupled proton is reduced as it shares its energy with the parent proton. This reduced energy is reflected in the lower J-value of the coupled proton. Therefore, since Proton A has a J-value of 3.0 Hz, Proton B will have a J-value less than 3.0 Hz.

To know more about Proton Coupling, visit:

https://brainly.com/question/28203099

#SPJ4

Hubble's observation of redshift in the light from distant galaxies led him to conclude that the galaxies were moving away from us.

To know more about doppler's effect , check out :

https://brainly.com/question/28106478

#SPJ4

When the maximal force and Full Width Half Maximum (FWHM) of the signal are combined, impulse would be roughly: if Fmax is 1000 N, and t is 0.1 s.

the result is in newton-seconds (Ns) or kilogrammes per second (kg/s), and is used to approximate the impulse.

I am unable to give a precise response without access to Figure 5.4. However, depending on the data given, the impulse can be roughly described as:

Fmax x t Impulse

where t is the Full Width Half Maximum (FWHM) of the signal and Fmax is the maximum force.

You must convert the force units to newtons and the time units to seconds before multiplying the two values to obtain the impulse in kilogrammes per second (kgm/s). The outcome will be expressed in newton-seconds (Ns) or kgm/s.

For instance, the impulse would be roughly: if Fmax is 1000 N, and t is 0.1 s.

1000 N x 0.1 s of an impulse equals 100 Ns or 100 kgm/s (to 1 decimal place).

Learn more about maximal force here:

https://brainly.com/question/11826042

#SPJ4

With a total charge of roughly 1.0 Coulomb, a group of 6.25 x 1018 electrons can be measured.

A single electron has a charge of about 1.602 x 10-19 Coulombs.

We can multiply the quantity of electrons by the charge of a single electron to determine the total charge of a group of electrons:

Total charge = (electron count) x (charge of a single electron)

Total charge is 1.602 x 10-19 C/electron x 6.25 x 10-18 electrons.

Charge total = 1.0 C

As a result, a group of 6.25 x 1018 electrons has an about 1.0 Coulomb overall charge.This calculation can be useful in many contexts, such as in the study of electric circuits, electromagnetism, and semiconductor devices.

Learn more about electron here:

https://brainly.com/question/1255220

#SPJ4