The two balls will meet at a time of 1.42 seconds.
The speed of the balls when they meet are -6.476 m/s and 13.956 m/s respectively.
What position will the ball land?
To determine when and where the two balls meet, we can use the vertical motion equations.
The first ball is thrown upwards, so its motion is governed by the equation of motion:
h(t) = h0 + v0t - 1/2gt^2
where;
h(t) is the height of the ball at time t, h0 is the initial height (which is equal to the height of the rooftop), v0 is the initial velocity (9 m/s), t is the time elapsed since it was thrown, and g is the acceleration due to gravity (approximately 9.8 m/s^2).The second ball is dropped from rest, so its initial velocity is zero and it follows the equation:
h(t) = h0 - 1/2gt^2
To find the time and place where the two balls meet, we need to find the time t at which their heights are equal. Setting the two equations equal to each other and solving for t, we find:
t = √((2v0) / g)
t = √((2 * 9) / 9.8) = 1.42 s
At this time, both balls have fallen the same distance, so they are at the same height. To find their speeds when they meet, we use their respective equations of motion and the time t found above.
The speed of the first ball at t = 1.42 s is:
v(t) = v0 - gt
= 9 m/s - 9.8 m/s * 1.42 s
= -6.476 m/s
The speed of the second ball at t = 1.42 s is:
v(t) = gt
= 9.8 m/s * 1.42 s
= 13.956 m/s
Learn more about speed here: https://brainly.com/question/6504879
#SPJ1
What is the average force of gravitation between Uranus and the Sun?
Answer:
1.41 10 21 newtons
Explanation:
Dr. Rhee wrapped a string tightly around a fixed pulley that has a moment of inertia of 0.0352 kg m2 and a radius of 12.5 cm. Then he pulls the string away from the pulley with a constant force of 5.00N. What is the speed of the string after it has unwound 2.31 m? O a. 2.09 m/s O b.4.95 m/s O c. 3.18 m/s d. 2.36 m/s O e. 1.97 m/s
The answer is closest to option e, 1.97 m/s. To solve this problem, we need to use conservation of energy. The initial potential energy of the system is converted into kinetic energy as the string unwinds.
We can find the potential energy using the equation U = Iω²/2, where I is the moment of inertia of the pulley, and ω is its angular velocity.
The potential energy of the system is given by U = Iω²/2 = (0.0352 kg m²)(ω²)/2. Initially, the potential energy is all stored in the string, so we can set U equal to the work done by the constant force to find the final kinetic energy:
U = Fd = (5.00 N)(2.31 m) = 11.55 J
Equating this to the kinetic energy, we get:
K = U = (0.0352 kg m²)(ω²)/2
Solving for ω, we get:
ω = √(2K/I) = √(2U/I) = √(2(11.55 J)/(0.0352 kg m²)) = 14.44 rad/s
Now we can find the final speed of the string by multiplying the final angular velocity by the radius of the pulley:
v = ωr = (14.44 rad/s)(0.125 m) = 1.805 m/s
Therefore, the answer is closest to option e, 1.97 m/s.
Learn more about speed here: brainly.com/question/28224010
#SPJ4
In one experiment the electric field is measured for points at distances $r$ from a uniform line of charge that has charge per unit length $\lambda$ and length $l$, where $l \gg r$. In a second experiment the electric field is measured for points at distances $r$ from the center of a uniformly charged insulating sphere that has volume charge density $\rho$ and radius $R =$ 8.00 mm, where $r > R$. The results of the two measurements are listed in the table, but you aren't told which set of data applies to which experiment: For each set of data, draw two graphs: one for $Er^2$ versus r and one for $Er$ versus $r$. (a) Use these graphs to determine which data set, A or B, is for the uniform line of charge and which set is for the uniformly charged sphere. Explain your reasoning. (b) Use the graphs in part (a) to calculate $\lambda$ for the uniform line of charge and $\rho$ for the uniformly charged sphere.
The uniform line of charge and [tex]\rho[/tex] for the uniformly charged sphere. Using slope the value of [tex]\lambda[/tex] is [tex]\\\frac{4\pi\epsilon_0\times slope}{2}$[/tex].
For the uniform line of charge, the electric field $E$ is inversely proportional to the distance $r$, so $Er$ should be constant. For the uniformly charged sphere, the electric field $E$ is inversely proportional to the square of the distance $r$, so $Er^2$ should be constant. Therefore, we can use the graphs of $Er^2$ versus $r$ and $Er$ versus $r$ to determine which data set is for the uniform line of charge and which set is for the uniformly charged sphere.
For data set A, the graph of $Er^2$ versus $r$ is a straight line, which means that $Er^2$ is constant. Therefore, data set A is for the uniformly charged sphere. For data set B, the graph of $Er$ versus $r$ is a straight line, which means that $Er$ is constant. Therefore, data set B is for the uniform line of charge.
For the uniform line of charge, the electric field $E$ is given by
E =[tex]\frac{2\lambda}{4\pi\epsilon_0r}$,[/tex]
where $\lambda$ is the charge per unit length and $\epsilon_0$ is the permittivity of free space. Since $Er$ is constant, we can write $Er = \frac{2\lambda}{4\pi\epsilon_0}$. From the graph of $Er$ versus $r$ for data set B, we can find the slope of the straight line, which is equal to $Er$. Therefore, we can use the slope to calculate $\lambda$:
[tex]$\lambda = \frac{4\pi\epsilon_0Er}{2} = \frac{4\pi\epsilon_0\times slope}{2}$[/tex]
For the uniformly charged sphere, the electric field $E$ is given by $E = \frac{\rho r}{3\epsilon_0}$, where $\rho$ is the volume charge density. Since $Er^2$ is constant, we can write $Er^2 = \frac{\rho r^3}{3\epsilon_0}$. From the graph of $Er^2$ versus $r$ for data set A, we can find the slope of the straight line, which is equal to $Er^2$. Therefore, we can use the slope to calculate [tex]$\rho$[/tex]
[tex]$\rho = \frac{3\epsilon_0Er^2}{r^3} = \frac{3\epsilon_0\times slope}{r^3}$[/tex]
To learn more about Slope :
https://brainly.com/question/1479054
#SPJ11
Explain the location, function, and main components of the continental shelf, continental shelf break,
continental slope, abyssal plains, oceanic trenches, and submarine canyons.
Answer:34
Explanation: you need to use a calulatoe
the current in bass lake has a speed of 2km/h. charle can paddle their canoe 24 km upstream and 24 km back in the same number of hrs as they can paddle 50 km what is charlie's eped in the stil water
According to the solving Charlie's speed in still water is 5 km/h.
What is relative velocity ?
Relative velocity is the velocity of an object or an observer in relation to another object or observer. It is the difference between the velocities of the two objects, as measured from a common frame of reference.
The concept of relative velocity is important in many areas of physics, including mechanics, astrophysics, and relativity theory. It allows us to understand how objects are moving relative to each other and to analyze their motion from different reference frames.
According to the given information:Let's assume that the speed of Charlie's canoe in still water is "v" km/h. Then, if Charlie paddles upstream against the current, the effective speed of the canoe will be:
v - 2 km/h
Likewise, if Charlie paddles downstream with the current, the effective speed of the canoe will be:
v + 2 km/h
We can use the formula:
time = distance / speed
to set up an equation that relates the time it takes for Charlie to paddle 24 km upstream and 24 km back with the time it takes to paddle 50 km. Since the times are the same, we can write:
24 / (v - 2) + 24 / (v + 2) = 50 / v
Multiplying both sides by the LCD (v - 2)(v + 2) yields:
24(v + 2) + 24(v - 2) = 50(v - 2)(v + 2) / v
Simplifying and rearranging, we get:
48v = 200v - 200
Solving for v, we find:
v = 5 km/h
Hence, Charlie's speed in still water is 5 km/h.
To know more about relative velocity visit :
https://brainly.com/question/17228388
#SPJ4
which of the following forms of light can be observed with telescopes at sea level? select all that apply.
(a) X rays. (b) ultraviolet light. (c) visible light.
Ultraviolet light and visible light can be observed with telescopes at sea level.
What does Ultraviolet light mean?
Ultraviolet (UV) light is a type of electromagnetic radiation with a shorter wavelength than visible light but longer than X-rays. It is located in the spectrum between violet light and X-rays and has a wavelength range of about 10 to 400 nanometers. UV light can cause chemical reactions and can be harmful to living organisms, but it also plays important roles in many natural processes, such as the formation of Vitamin D in the skin and the survival of certain species of plants.
In astronomy, UV light provides important information about the hot, high-energy regions of stars and galaxies, and it can be used to study the atmospheres of planets, comets, and other celestial objects. To observe ultraviolet light, specialised telescopes and detectors are often used, as much of it is absorbed by the Earth's atmosphere.
Ultraviolet light and visible light can be observed with telescopes at sea level. X-rays are not typically observed with telescopes because they are highly energetic forms of electromagnetic radiation that cannot penetrate the Earth's atmosphere. X-rays are typically observed with specialised telescopes that are launched into space or with X-ray detectors in satellites.
To know more about Ultraviolet Light, visit:
https://brainly.com/question/27778727
#SPJ1
three capacitors of capacitance 1 micro Farad, 2 microfarad and 2 microfarad are each charged to 250 volts and then connected in series. 1) find the overall potential difference across the capacitor 2) find the charge on each capacitor and 3) find the energy stored in the combination
1) The overall potential difference across the capacitor is 1.66 V.
2) The charge on each capacitor is 1.66 C.
3) The energy stored in the combination will be 1.3778 J.
What is a capacitor?A capacitor is a device that stores electrical energy in an electric field by accumulating electric charges on two insulated surfaces. It is a two-terminal passive electronic component. Capacitance is the effect of a capacitor.
Given that three capacitors of capacitance 1 micro Farad, 2 microfarads and 2 microfarads are each charged to 250 volts and then connected in series.
Q₁ = C₁Vt
Q₁ = 1 x 5 = 5 μF
Q₂ = C₂Vt
Q₂ = 2 x 5 = 10 μF
The equivalent capacitance will be,
1 / Ct = 1 / C₁ + 1 / C₂
Ct = 2 / 3 μF
Vt = 10 / 3 ÷ 2
Vt = 1.66 V
The charge will be,
q =CV
q = 1 x 1.66
q = 1.66 C
The energy will be calculated as:-
U = 1/2 x C xV
U = 1 / 2 x 1 x 1.66²
U = 1.3778 J
To know more about capacitors follow
https://brainly.com/question/17481839
#SPJ1
In the current divider circuit shown, if the resistors have values of R1 =607k12, R2 =292kN and R3 =216kN2, find the value of the source current I, that will produce and output current of I. =51mA. Enter your answer in units of milli-amps (mA). 11. Is R1 M R2 M R2 m
The value of the source current I, that will produce and output current of I will be = 51 mA is 219.6 mA.
To find the source current I that will produce an output current of I_out = 51 mA in the current divider circuit shown, we can use the current divider formula:
I_out = I * (R2 / (R1 + R2 + R3))
Rearranging this formula to solve for I, we get:
I = I_out * (R1 + R2 + R3) / R2 = 51 mA * (607.12 kΩ + 292 kΩ + 216.2 kΩ) / 292 kΩ = 219.6 mA
Therefore, the value of the source current I that will produce an output current of 51 mA is 219.6 mA.
Regarding the second part of the question, it is not clear what is meant by "Is R1 M R2 M R2 m". Please provide more information or clarification.
Output current refers to the current that flows out of a device or circuit and is usually measured in amperes (A) or milliamperes (mA). It is the current that is delivered to the load or external circuit connected to the output terminals of the device.
In an electronic circuit, the output current is determined by the output voltage and the impedance of the load. For example, a power supply may provide a certain voltage to a load, and the output current will depend on the resistance or impedance of the load.
To know more about Output Current visit,
https://brainly.com/question/13076734
#SPJ4
The sound intensity 54.0 m from a wailing tornado siren is 0.170 W/m^2.
The weakest intensity likely to be heard over background noise is ≈1μW/m2. Estimate the maximum distance at which the siren can be heard.
The maximum distance at which the siren can be heard is approximately 1043.3 m, assuming there is no significant obstruction or reflection of sound waves.
What is sound intensity?The sound power per unit area is the definition of sound intensity. The measurement of sound intensity in the air near a listener's position is the typical context.
Let's call the maximum distance at which the siren = D
0.170 W/[tex]m^2[/tex] / [tex](54.0 m)^2[/tex] = I / [tex]D^2[/tex]
where I is the unknown intensity at distance D.
Solving for I, we get:
I = 0.170 [tex]W/m^2[/tex] x [tex](D/54.0 m)^2[/tex]
We know that the weakest intensity likely to be heard over background noise is ≈1μW/m2, so we can set I equal to 1 μW/[tex]m^2[/tex] and solve for D:
1 μW/[tex]m^2[/tex] = 0.170 W/[tex]m^2[/tex] x [tex](D/54.0 m)^2[/tex]
[tex]D^2[/tex] = (1 μW/[tex]m^2[/tex]) x [tex](54.0 m)^2[/tex] / 0.170 [tex]W/m^2[/tex]
[tex]D^2[/tex] = 1.086 x [tex]10^6[/tex]
D = √(1.086 x [tex]10^6 m^2[/tex])
D ≈ 1043.3 m
Thus, the maximum distance will be 1043.3 m.
For more details regarding sound intensity, visit:
https://brainly.com/question/12899113
#SPJ9
A box initially has 335 J of kinetic energy. The final kinetic energy is 125. How much work was done to the box?
Answer:
Explanation:
The work-energy theorem states that the net work done by the forces on an object equals the change in its kinetic energy.
Work done = 335-125=110J
fill in the blank. the phenomenon of perceptual set underscores the contribution of___processes to perception. please choose the correct answer from the following choices, and then select the submit answer button. answer choices bottom-up top-down sensory innate
The phenomenon of perceptual set underscores the contribution of top-down processes to perception.
Phenomenon of perceptual set highlights the important role of top-down processing in perception, as it shows how our past experiences, expectations, and preconceptions can shape and bias our interpretation of incoming sensory information. Perceptual set is a classic example of top-down processing, as our prior knowledge and expectations about the world can shape how we perceive incoming sensory information. For instance, if we see a group of objects arranged in a particular way, we may perceive them as a familiar shape or pattern even if they are actually different objects.
To know more about Perceptual set, herehttps://brainly.com/question/11924416
#SPJ4
what is the difference between negative velocity positive acceleration and positive velocity and negative acceleration ?
The difference between negative velocity positive acceleration and positive velocity and negative acceleration:
When an object moves in a nice course( left to proper) and the rate of exchange of speed is nice, we name it high- quality acceleration( speed is growing). while an item moves in a high quality path, the acceleration is terrible, but the price of change in haste is terrible( speed is reducing). further, the charge of exchange of speed decreases in the negative path is taken into consideration high- quality acceleration as it implies adding the haste in a high- quality route.
An object has a positive velocity when it is moving in the right direction. If an object is slowing down, its acceleration vector is pointing away from the direction in which it is moving (in this case, a negative acceleration).
Learn more about Acceleration, velocity:
https://brainly.com/question/17259504
#SPJ4
If Earth were 9.5 times farther away from the Sun than it is now, how many times weaker would the gravitational force between the Sun and Earth be?
If Earth were 9.5 times farther away from the Sun than it is now, 95 times weaker would be the gravitational force between the Sun and Earth.
What is gravitational force ?Any two things with mass are drawn together by the gravitational force. The gravitational force is known as. The formula F = Gm1m2/r2 states that the direction of force will always point in the direction of the other mass along the line connecting the two bodies.
In contrast to gravity, which is the force of attraction between any two bodies, gravitation is the pull of any body towards the earth.
Learn more about Gravitational force here:
https://brainly.com/question/72250
#SPJ1
If two sound waves (frequencies f1 and f2) produce a beat frequency, which of the following is true?A. The beat frequency is equal to the sum of f1 and f2.B. The beat frequency is equal to the difference of f1 and f2C. The beat frequency is equal to the average of f1 and f2.
The beat frequency will be equal to the difference between f1 and f2. Option B.
Beat frequency from two sound wavesIf two sound waves with frequencies f1 and f2 produce a beat frequency, the beat frequency will be equal to the absolute value of the difference between the two frequencies, i.e., |f1 - f2|.
For example, if f1 = 400 Hz and f2 = 405 Hz, the beat frequency would be |400 - 405| = 5 Hz.
The beat frequency is the difference between the two frequencies that the human ear can perceive as a pulsing or beating sound. The rate of the beating sound corresponds to the beat frequency, which is measured in Hertz (Hz).
More on beat frequencies can be found here: https://brainly.com/question/21923211
#SPJ1
A boat travels 12km in 10mins, and 15km in the next 10mins. Is the boat traveling at a constant speed?
The boat is not traveling at a constant speed. The boat is either accelerating or decelerating during the two intervals.
How to determine if the boat is traveling at a constant speed?First we need to compare the distance traveled with the time taken.
For the first 10 minutes, the boat travels 12 km. Therefore, its speed can be calculated as:
Speed = Distance / Time = 12 km / 10 min = 1.2 km/min
For the next 10 minutes, the boat travels 15 km. Therefore, its speed can be calculated as:
Speed = Distance / Time = 15 km / 10 min = 1.5 km/min
Therefore, Since the speeds calculated for the two intervals are different, the boat is not traveling at a constant speed. The boat is either accelerating or decelerating during the two intervals.
Learn more about constant speed here : brainly.com/question/28280496
#SPJ1
If the vector below is multiplied by 2, what will be its end point?
A. (-2,2)
B. (-2,1)
C. (-1,2)
D. (2,2)
The endpoint of the vector after the multiplication of 2 will be (2,2). The correct option is D.
What is a vector?In physics, a vector is a quantity that has both magnitude and direction. It is typically represented by an arrow with the same direction as the quantity and a length proportional to the magnitude of the quantity.
Given that the vector is multiplied by the 2. The endpoint of the vector after the multiplication of 2 will be calculated as:-
The endpoint of the vector in the image is ( 1, 1 ).
Endpoint = ( 1, 1 ) x 2
Endpoint = ( 2, 2 )
Therefore, the vector's endpoint after multiplication by two will be (2,2). The correct answer is D.
To know more about vectors follow
brainly.com/question/29468146
#SPJ1
A simple pendulum, consists of an object suspended by a string. The object is assumed to be a particle. The string, with its top end fixed, has negligible mass and does not stretch. In the absence of air friction, the system oscillates by swinging back and forth in a vertical plane. If the string is 2.45
m
long and makes an initial angle of 26.0
∘
with the vertical, calculate the speed of the particle at the following positions.
(a) at the lowest point in its trajectory.
(b) when the angle is 15.0
∘
.
The angular speed of the pendulum is √7 rad/s.
We need to know about pendulum experiments to solve this problem. The pendulum is a simple experiment to calculate gravitational acceleration. The gravitational acceleration can be calculated by
g = 4π² . L / T²
where g is gravitational acceleration, L is the length of the string and T is the period.
From the question above, we know that:
L = 1.40 m
g = 9.8 m/s²
θmax = 31°
m = m
Find the period of pendulum
g = 4π² . L / T²
9.8 = 4π² . 1.4 / T²
T² = 4π²/7
T = 2π√7 / 7 s
Find the angular speed
ώ = 2π / T
ώ = 2π / (2π√7 / 7)
ώ = √7 rad/s.
Learn more about acceleration here:
https://brainly.com/question/30660316
#SPJ4
2. A photon with an energy of 1.64x10-13 J has just enough energy to create an electron-positron pair. What is the rest mass of the electron?
The rest mass of the electron would be 1.82x10^-30 kg.
Rest mass calculationThe rest mass of the electron can be calculated using the formula:
E = mc^2
where E is the energy of the photon, m is the rest mass of the electron, and c is the speed of light.
Rearranging the formula, we get:
m = E/c^2
Substituting the given values, we get:
m = (1.64x10^-13 J) / (3x10^8 m/s)^2
m = 1.82x10^-30 kg
Therefore, the rest mass of the electron is 1.82x10^-30 kg.
More on the rest mass of electrons can be found here: https://brainly.com/question/30456752
#SPJ1
In a classroom demonstration the pressure inside a soft drink can is suddenly reduced to essentially zero. Assuming the can to be a cylinder with a height of 15 cm
and a diameter of 7.0 cm
, find the total inward force exerted on the vertical sides of the can due to atmospheric pressure.
The total inward force exerted on the vertical sides of the can due to atmospheric pressure is calculated as 4053 N.
What is pressure?Pressure may be defined as the amount of force that is correspondingly applied perpendicular to the surface of an object per unit area. The symbol for it is "p" or P. It is generally calculated with the help of the formula, pressure, P = F/A.
According to the question,
The atmospheric pressure acts on the outer surface of the can. In order to calculate this inward force we need to know the total surface area of the can available to the air outside the can. Since the can is a cylinder with a total surface area given by 2πrh + 2πr².
A = 2πr(r + h)
where h = height of the cylinder = 15cm.
r = radius of the can = 7 cm/2 = 3.50 cm. (as r = diameter /2)
A = 2π×3.50 ×(3.50 + 15) = 406.6 cm² = 406.6 × 10-⁴ = 0.040m².
Atmospheric pressure, P = 101325Pa = 101325 N/m²
F = P × A
F = 101325 × 0.040 = 4053 N.
Therefore, the total inward force exerted on the vertical sides of the can due to atmospheric pressure is calculated as 4053 N.
To learn more about Pressure, refer to the link:
https://brainly.com/question/28012687
#SPJ9
A force of 60 N is exerted on one end of a 1.0-m-long lever. The other end of the lever is attached to a rotating rod that is perpendicular to the lever. By pushing down on the end of the lever, you can rotate the rod. If the force on the lever is exerted at an angle of 3
0
∘
30 ∘
, what torque is exerted on the lever? (
sin
3
0
∘
=
0.5
;
cos
3
0
∘
=
0.87
;
tan
3
0
∘
=
0.58
)
(sin30 ∘
=0.5;cos30 ∘
=0.87;tan30 ∘
=0.58) A. 30 N B. 52 N C. 60 N D. 69 N
The required torque applied on the rotating rod that is perpendicular to the lever is calculated to be 30 N-m.
Torque is a unit of measurement for the force that can cause an item to revolve about an axis. Torque accelerates an object in an angular direction, much like force does in linear kinematics.
Applied force is given as = 60 N
Length of a lever = 1.0 m
The force on the lever is exerted at an angle of 30°.
sin 30° = 0.5
So, the torque applied on the rod = force × distance × sin30°
⇒ 60 N × 1.0 m × 0.50
⇒ 30 N-m
Thus, the torque applied on the rod is calculated to be 30 N-m.
To know more about torque:
https://brainly.com/question/29345310
#SPJ4
can someone please help me with this 50 points to whoever gets it right
The world’s tallest lighthouse is located in Japan and is 106 m tall. A winch that provides 300 W of power is used to raise 25.0 kg of equipment to the lighthouse top at a constant velocity. How long does it take the equipment to reach the lighthouse top?
To solve this problem, we can use the formula for mechanical power:
Power = Force x Velocity
Since the equipment is being raised at a constant velocity, we can assume that the force applied by the winch is equal and opposite to the force of gravity acting on the equipment:
Force = Weight of equipment = m * g
where m is the mass of the equipment and g is the acceleration due to gravity (9.81 m/s^2).
Substituting the given values, we get:
Force = 25.0 kg * 9.81 m/s^2 = 245.25 N
Power = 300 W
Velocity = ?
We can solve for the velocity by rearranging the formula:
Velocity = Power / Force
Velocity = 300 W / 245.25 N
Velocity = 1.22 m/s
Now, we can use the formula for average speed to find the time it takes for the equipment to reach the lighthouse top:
Average speed = Total distance / Total time
Since the equipment is moving vertically, the total distance is equal to the height of the lighthouse:
Total distance = 106 m
We can solve for the total time by rearranging the formula:
Total time = Total distance / Average speed
Total time = 106 m / 1.22 m/s
Total time = 86.9 seconds (rounded to 2 decimal places)
Therefore, it takes approximately 86.9 seconds, or 1 minute and 27 seconds, for the equipment to reach the top of the lighthouse.
looking at error instrumental error the actual value of the mass of the object, called a calibration mass, is 250.0 g. below, calculate the difference of each measurement from the actual value. use negative symbols if the measured mass is less than the actual mass. is there any pattern to the difference? yes no difference from actual value balance 2 253.135 g 253.131 g 253.133 g 253.130 g 253.132 g 253.130 g 253.131 g 253.136 g 253.133 g 253.134 g
To calculate the difference between each measurement and the actual value of 250.0 g, we subtract 250.0 g from each measured value. The results are:
How to calculate actual value ?Balance 2:
253.135 g - 250.0 g = +3.135 g
253.131 g - 250.0 g = +3.131 g
253.133 g - 250.0 g = +3.133 g
253.130 g - 250.0 g = +3.130 g
253.132 g - 250.0 g = +3.132 g
253.130 g - 250.0 g = +3.130 g
253.131 g - 250.0 g = +3.131 g
253.136 g - 250.0 g = +3.136 g
253.133 g - 250.0 g = +3.133 g
253.134 g - 250.0 g = +3.134 g
As we can see, all the differences are positive, which means that all the measured values are greater than the actual value. There does not seem to be a clear pattern to the differences, but they are all relatively small, with a maximum difference of 3.136 g. This suggests that the balance is fairly accurate, but it may be possible to improve the precision by taking more measurements and averaging the results.To know more about actual value , check out :
https://brainly.com/question/20813161
#SPJ4
The Saturn V rocket had a mass of 2.45x10 kg, 65% of which was fuel. In the absence of gravity and starting at rest, what would be the maximum velocity attained (the "burnout velocity")? The fuel exhaust velocity was 3100m/s.
Answer:
Approximately [tex]5800\; {\rm m\cdot s^{-1}}[/tex].
Explanation:
Let [tex]m[/tex] denote the initial mass of the rocket and the fuel. The question states that the mass of the fuel is [tex]65\%[/tex] of the total mass, which is [tex]0.65\, m[/tex]. The mass of the rocket without the fuel would be [tex](1 - 0.65)\, m[/tex].
When an object of mass [tex]m[/tex] travels at a velocity of [tex]v[/tex], the momentum [tex]p[/tex] of that object would be [tex]p = m\, v[/tex].
Initial momentum of the rocket and the fuel, combined, would be [tex]0\; {\rm kg \cdot m\cdot s^{-1}}[/tex] since initial velocity was [tex]0\; {\rm m\cdot s^{-1}}[/tex].
Let [tex]v(\text{rocket})[/tex] and [tex]v(\text{fuel})[/tex] denote the final velocity of the rocket and the fuel. Final momentum of the rocket would be [tex]((1 - 0.65)\, m)\, (v(\text{rocket}))[/tex]. Final momentum of the fuel would be [tex](0.65\, m)\, (v(\text{fuel}))[/tex].
The total final momentum of the rocket and the fuel, combined, woul dbe:
[tex]((1 - 0.65)\, m)\, (v(\text{rocket})) + (0.65\, m)\, (v(\text{fuel}))[/tex].
Under the assumptions, momentum would be conserved. In other words, the total momentum of the rocket and the fuel would stay the same:
[tex](\text{total final momentum}) = (\text{total initial momentum})[/tex].
[tex]((1 - 0.65)\, m)\, (v(\text{rocket})) + (0.65\, m)\, (v(\text{fuel})) = 0[/tex].
Given that [tex]v(\text{fuel}) = 3100\; {\rm m\cdot s^{-1}}[/tex]:
[tex]\begin{aligned}v(\text{rocket}) &= \frac{0.65}{1 - 0.65}\, v(\text{fuel}) \\ &= \frac{0.65}{1 - 0.65}\, (3100)\; {\rm m\cdot s^{-1}} \\ &\approx 5800\; {\rm m\cdot s^{-1}}\end{aligned}[/tex].
if a biker travels 33 miles in 3 hours, can you guarantee that the bike speedometer must have read 11 mph at least once during the trip? can you guarantee it will read 8 mph at least once during the trip? can you guarantee it will read at least 14 mph? support your conclusions mathematically.
Can you ensure that perhaps the bicycle's speedometer must have displayed 11 mph at least once for a rider who covers 33 miles.
A speedometer is what?
Speedometer is a computer benchmark that evaluates how quickly Web applications respond. It simulates user behaviors like adding to-do items using demo web applications. The window of your browser is too small. Lets create the view port at least 850px x 650px in size to get the most accurate results. The current size is 1024 by 569 pixels.
Which speedometer works best with a Royal Enfield motorcycle?
Version 2.0 of the BRPEARl Heavy Digital Speedometer 5.5" Screen A8 automobile hud Head up Displays OBD2 Speedometer D'Mega Shop RX 100 135 RXG Instrument panel Mount Bracket An... Dig... Bullkartzone Speedo Dial for Royal Honda Cycle (W... bike rpm, tachometer, speedometer, tacho gauge
To know more about speedometer visit:
https://brainly.com/question/29098798
#SPJ1
Given the displacement vector D = (5î − 8ĵ) m, find the displacement vector (in m) R so that D + R = −5Dĵ. (Express your answer in vector form.)
It is possible to write d = (x2 - x1)i + (y2 - y1)j to represent the displacement vector d from P1 to P2. (x2 - x1) units in the x-direction plus (y2 - y1) units in the y-direction make up the displacement d.
How do you determine the displacement that results?S = x2+y2 is the formula for the displacement that results. S stands for displacement. The item is moving in two directions, with the first being X and the second being Y. Y = 0 if the motion of your item is restricted to one direction.
The vector's magnitude is thus a| r|. A vector's magnitude only changes when it is multiplied by a scalar; its direction remains unchanged unless the scalar is negative.
learn more about vector's magnitude
https://brainly.com/question/26700114
#SPJ1
Express the magnitude of the electric force using the electric field E and the elementary charge e. FE = _____
E=Fqtest=k|Q|r2. The size of the electric field produced by a point charge Q is determined by this equation. The distance r in the denominator is the separation between the point of interest and the point charge, Q, or the center of a spherical charge.
What determines how much electric force a charged particle experiences in an electric field?
It is obvious from the equation above that the strength of the electric force a charged particle experiences in an electric field depends on the size of the charge on the particle.
What are the electric field's strength and direction?
A positive point charge is pointed straight away by the electric field, and a negative point charge is pointed directly in. Going away from the point charge, the electric field's strength diminishes as 1 / r 2 1/r21, slash, r, squared.
To know more about denominator visit:
https://brainly.com/question/12550364
#SPJ1
1. Find the minimum magnitude of the acceleration amin of the car.2. Find the maximum acceleration amax of the car.Express your answer in meters per second per second to the nearest integer.3. Find the distance d0,2 traveled by the car between t=0s and t=2s.Express your answer in meters to the nearest integer.
The minimum magnitude of the acceleration of the car is 0.
The maximum acceleration will be 30m/s².
The distance traveled is 55m.
How to calculate the distanceMinimum magnitude of acceleration of the car is 0. This is because in a V-t graph slope of tangent on the of car and at t=us slope is zero.
Maximum acceleration of car is from o tois where slope is steepest.
= V - u / t
= 30 - 0 / 1
= 30m/s²
The distance will be:
d1 = 15
d2 = 1/2(30 + 50) = 40
Distance = 15 + 40 = 55m
Learn more about magnitude on:
https://brainly.com/question/24468862
#SPJ1
1 kg block and a 2 kg block are placed next to each other on a frictionless horizontal table. A horizontal force of 6 N is applied orthogonally to the side 1 kg block. Find the magnitude of the force acting on the 2 kg block?
Group of answer choices
4 N
1 N
3 N
2 N
Answer:
3N
Explanation:
yeah just that is it you don't need calculation to solve it
How much force will this car experience if it collides with a wall and the collision lasts for
0.05 s?
The amount of force after 0.05 seconds will be 528000 N.
What is a force?A force is an influence that can cause an object's motion to change. A force can cause a mass object to change its velocity, or accelerate. Intuitively, a force can be described as a push or a pull.
Given that a car of mass 1500kg collides with a wall. the initial and final speed of the car is -15m/s and 2.6m/s. if the collision lasts for 0.05 seconds.
The force will be calculated as:-
Mc x V₁ + F x t = Mc x V₂
Here, V₁ = -15 m /s and V₂ = 2.6 m /s.
Mc x V₁ + F x t = Mc x V₂
-( 1500 x 15 ) + F x 0.05 = 1500 x 2.6
F x 0.05 = 22500 + 3900
F = 26400 / 0.05
F = 528000 N
Therefore, the force after the collision will be 528000 N.
The complete question is given below.
A car of mass 1500kg collides with a wall. the initial and final speed of the car is -15m/s and 2.6m/s. if the collision lasts for 0.05 seconds. find the impulse caused by the collision and the average force on the car.
To know more about force follow
https://brainly.com/question/29055623
#SPJ1