A ball of mass 0.5 kg is thrown against the wall at a speed of 12m/s. It bounces back with a speed of 8m/s. The collision last for 0.10s. What is the average force of the ball due to collision?

Answers

Answer 1

The average force of the ball due to collision is 20 N.


The average force of the ball due to collision can be found by using the formula:

Average force = (Change in momentum) / (Time taken)

We first need to calculate the change in momentum of the ball. Momentum is defined as mass multiplied by velocity. So, the momentum of the ball before the collision is:

P1 = m1 * v1 = 0.5 kg * 12 m/s = 6 kg m/s

The momentum of the ball after the collision is:

P2 = m1 * v2 = 0.5 kg * (-8 m/s) = -4 kg m/s (the negative sign indicates that the ball is moving in the opposite direction)

The change in momentum is therefore:

ΔP = P2 - P1 = (-4) - 6 = -10 kg m/s

We also know that the collision lasts for 0.10 seconds. So, we can plug in the values into the formula for average force:

Average force = (-10 kg m/s) / (0.10 s) = -100 N

The negative sign indicates that the force is acting in the opposite direction to the motion of the ball. To get the magnitude of the force, we take the absolute value:

|Average force| = |-100 N| = 100 N

Therefore, the average force of the ball due to collision is 100 N. However, since the force is acting in the opposite direction to the motion of the ball, we take the negative sign into account and the final answer is 20 N.

To learn more about average force visit:

brainly.com/question/29754124

#SPJ11


Related Questions

Repeat Quick Check 7.1 (page 338) but in line 14 of SubsetSum, always choose the smallest element of W. Diagram of recursive invocations: Which strategy (largest element as in the original Quick Check or smallest element as here) seems better?

Answers

The effectiveness of choosing the largest or smallest element in the Subset Sum algorithm depends on the characteristics of the input set, and the choice should be based on the distribution of values and problem requirements.

Which strategy (choosing the largest or smallest element) is better in the Subset Sum algorithm, and how does it depend on the characteristics of the input set?

To compare the two strategies, let's examine the implications of choosing the largest and smallest elements at line 14 of the SubsetSum algorithm.

Choosing the largest element:

  - This strategy aims to select the largest element from the set W, potentially reducing the number of elements available for subsequent recursive calls. It prioritizes tackling the larger values first.

  - By selecting the largest element, the algorithm may be able to quickly find a solution if a large enough element is present in the set.

  - However, it also runs the risk of discarding smaller elements that could contribute to a valid solution.

Choosing the smallest element (requested modification):

  - This strategy involves selecting the smallest element from the set W, potentially including more elements for subsequent recursive calls. It focuses on handling the smaller values first.

  - By selecting the smallest element, the algorithm ensures that smaller values are considered early on, which may help in finding a solution more efficiently.

  - However, it runs the risk of including unnecessary elements in the recursive calls, potentially leading to redundant calculations and a slower overall execution.

Based on the diagram of recursive invocations, we can consider the following:

- If the set W contains a wide range of values with significant differences, the strategy of choosing the largest element may be more effective. It allows the algorithm to quickly prioritize larger values, potentially leading to faster solutions.

- On the other hand, if the set W contains relatively similar values or a smaller range of values, the strategy of choosing the smallest element might be better. It ensures that smaller values are considered early on, potentially allowing the algorithm to find a solution more efficiently.

Ultimately, the effectiveness of each strategy depends on the specific characteristics of the input set W. It's important to analyze the nature of the problem and the distribution of values in order to determine which strategy is more suitable.

Learn more about   Subset Sum algorithm

brainly.com/question/30547865

#SPJ11

the motor of an electric drill draws a 3.4 a rms current at the power-line voltage of 120 v rms. What is the motor's power if the current lags the voltage by 16??

Answers

The power of the motor is 411.84 W.

The formula for calculating power is P = VI cos(theta), where V is the voltage, I is the current, and theta is the angle between the voltage and current.

Given that the current drawn by the motor is 3.4 A rms at 120 V rms and lags the voltage by 16 degrees, we need to calculate the power.

First, we need to convert the rms current and voltage to the peak values, which is done by multiplying by the square root of 2 (1.414):

Peak current I = 3.4 A rms x 1.414 = 4.81 A

Peak voltage V = 120 V rms x 1.414 = 169.68 V

Next, we calculate the power using the formula:

P = VI cos(theta)

Where cos(theta) is the power factor, which is equal to cos(16) = 0.9613.

P = 169.68 V x 4.81 A x 0.9613 = 411.84 W

To know more about power, refer here:

https://brainly.com/question/30764403#

#SPJ11

Consider a civilization broadcasting a signal with a power of 1.1×10^4 watts. The Arecibo radio telescope, which is about 300 meters in diameter, could detect this signal if it is coming from as far away as 105 light-years. Suppose instead that the signal is being broadcast from the other side of the Milky Way Galaxy, about 70000 light-years away. How large a radio telescope would we need to detect this signal? (Hint: Use the inverse square law for light.)How large a radio telescope would we need to detect this signal?

Answers

We would need a radio telescope with a diameter of at least 114 meters to detect the signal from 70000 light-years away. Assuming the signal strength follows the inverse square law for light, we can use the following equation:

[tex]P1/P2 = (D2/D1)^2[/tex]

where

P1 is the power of the signal received by the Arecibo telescope,

P2 is the power of the signal we want to detect,

D1 is the distance from the Arecibo telescope to the source of the signal (105 light-years),

D2 is the distance from us to the source of the signal (70000 light-years).

We can rearrange the equation to solve for P2:

[tex]P2 = P1*(D1/D2)^2[/tex]

Plugging in the given values, we get:

[tex]P2 = 1.1*10^4 watts * (105/70000)^2[/tex]

    = 0.029 watts

So we need a radio telescope that can detect a signal with a power of 0.029 watts.

The Arecibo telescope has a diameter of 300 meters, so we can use the following equation to find the required diameter, D, of the telescope:

[tex]P = k*A*(D/2)^2[/tex]

where

P is the power of the signal that the telescope can detect,

A is the effective area of the telescope,

k is a constant (about 1 for radio telescopes), and

D is the diameter of the telescope.

We can rearrange the equation to solve for D:

[tex]D = \sqrt{(4*P/(k*A*\pi ))[/tex]

Plugging in the given values, we get:

[tex]D = \sqrt{(4*0.029/(1*(\pi )*(1.36*10^7)))[/tex]

   = 114 meters

Therefore, we would need a radio telescope with a diameter of at least 114 meters to detect the signal from 70000 light-years away.

To know more about Arecibo telescope refer here

brainly.com/question/18649585#

#SPJ11

calculate the change in entropy in cal/k for a sample of water with mass m = 2.5 kg and changing temperature from t1 = 15.9°c to t2 = (15.9 10)°c. the specific heat c of water is 1,000 cal/kg/k.

Answers

For the given water sample, the entropy change is 86.5 cal/K.

We may use the following formula to get the change in entropy in cal/k for a sample of water with mass m = 2.5 kg and a temperature shift from t1 = 15.9°C to t2 = (15.9 + 10)°C:

S = mcT/T, where S is the change in entropy, m is the mass of the water, c is its specific heat, T is the starting temperature in Kelvin, and T is the change in temperature.

The starting temperature must first be converted to Kelvin:

T1 = 15.9°C + 273.15 = 289.05 K

The temperature change may then be calculated as follows:

ΔT = T2 - T1 = (15.9 + 10)°C + 273.15 - 289.05 = 10 K

We can now enter the values into the formula as follows:
S is equal to 86.5 cal/K or (2.5 kg)(1,000 cal/kg/K)(10 K)/(289.05 K).

As a result, 86.5 cal/K represents the change in entropy for the given water sample.

To know more about entropy visit:

https://brainly.com/question/13135498

#SPJ11

a mixture containing 0.769 mol he(g), 0.305 mol ne(g), and 0.115 mol ar(g) is confined in a 10.00-l vessel at 25 ∘c. part a calculate the partial pressure of he in the mixture.'

Answers

A mixture containing 0.769 mol he(g), 0.305 mol ne(g), and 0.115 mol ar(g) is confined in a 10.00-l vessel at 25 ∘c. The partial pressure of He in the mixture is 1.806 atm.

The total number of moles of gas in the mixture is

n(total) = n(He) + n(Ne) + n(Ar) = 0.769 mol + 0.305 mol + 0.115 mol = 1.189 mol

Using the ideal gas law, the pressure of the gas mixture is given by

PV = nRT

Where P is the pressure, V is the volume, n is the total number of moles of gas, R is the ideal gas constant, and T is the temperature.

R = 0.08206 L⋅atm/K⋅mol (the units must be consistent)

T = 25°C + 273.15 = 298.15 K

P = nRT/V = (0.769 mol / 1.189 mol) × (0.08206 L⋅atm/K⋅mol) × (298.15 K) / (10.00 L) = 1.806 atm

Therefore, the partial pressure of He in the mixture is 1.806 atm.

To know more about partial pressure here

https://brainly.com/question/9529124

#SPJ4

A diverging lens with a focal length of -14 cm is placed 12cm to the right of a converging lens with a focal length of 20 cm . An object is placed 36 cm to the left of the converging lens.
a) where will the final inage be located?
b) where will the image be if the doverging lens is 43 cm from the congerging lens?
Ch 33 HW Problem 33.24 Constants Periodic Table Part A A diverging lens with a focal length of-14 cm is placed 12 cm to the right of a converging lens with a focal length of 20 cm An object is placed 36 cm to the left of the converging lens. Where will the final image be located? Express your answer using two significant figures em to the left of the diverging lens Submit Request Answer Part Where will the image be if the diverging lens is 43 em from the converging lens? Express your answer using two significant figures. Find the image location relative to the diverging lens em to the right of the diverging lens Submit Request Answer Provide Feedback

Answers

The final image will be located 18 cm to the left of the diverging lens. The image formed by the converging lens will act as an object for the diverging lens.

Using the lens formula (1/f = 1/v - 1/u), where f is the focal length, v is the image distance, and u is the object distance, we can calculate the image distance for the converging lens as 40 cm. This image distance then becomes the object distance for the diverging lens. Using the lens formula again, with the focal length of the diverging lens as -14 cm and the object distance as 40 cm, we find that the image distance for the diverging lens is -22 cm. Adding the object distance of the diverging lens (-12 cm) gives us the final image distance of -34 cm. Converting to a positive value, the final image is located 18 cm to the left of the diverging lens. If the diverging lens is 43 cm from the converging lens, the image location relative to the diverging lens can be calculated by considering the image formed by the converging lens as the object for the diverging lens. Using the lens formula, with the object distance as 43 cm, the focal length as 20 cm, and the image distance for the converging lens as 40 cm (calculated as explained in part a), we find that the image distance for the diverging lens is -24 cm. The negative sign indicates a virtual image formed on the same side as the object. Therefore, the image location relative to the diverging lens is 24 cm to the right of the diverging lens.

learn more about object here:

https://brainly.com/question/31018199

#SPJ11

A sinusoidal wave on a string is described by the wave function y = 0.18 sin (0.70x - 57t) where x and y are in meters and t is in seconds. The mass per unit length of this string is 12.0 g/m. (a) Determine speed of the wave. m/s (b) Determine wavelength of the wave. m (c) Determine frequency of the wave. Hz (d) Determine power transmitted by the wave. W

Answers

(a) The speed of the wave is 5.0 m/s.

(b) The wavelength of the wave is 9.0 m.

(c) The frequency of the wave is 9.1 Hz.

(d) The power transmitted by the wave is 0.41 W.

To determine the speed of the wave, we need to use the equation v = λf, where v is the wave speed, λ is the wavelength, and f is the frequency. Since we are given the wave function, we can see that the coefficient of the x term is 0.70, which corresponds to 2π/λ. Solving for λ, we get λ = 9.0 m. The frequency is given by the coefficient of the t term, which is 57, so f = 57/(2π) ≈ 9.1 Hz. Therefore, the speed of the wave is v = λf ≈ 5.0 m/s.

As we found in part (a), the wavelength is given by λ = 2π/k, where k is the coefficient of the x term in the wave function. Substituting the given values, we get λ = 9.0 m.

As we found in part (a), the frequency is given by the coefficient of the t term in the wave function, which is 57/(2π) ≈ 9.1 Hz.

The power transmitted by a wave on a string is given by P = ½μv²ω²A², where μ is the mass per unit length, v is the wave speed, ω is the angular frequency (ω = 2πf), and A is the amplitude of the wave. Substituting the given values, we get P = 0.41 W.

To learn more about power transmitted, here

https://brainly.com/question/28964433

#SPJ4

how long will you have to wait for the oxygen in the chamber to decrease from 21% to 20%? a) 18 hours b) 9 hours c) 1.8 hours d) 1 hours

Answers

You will have to wait 1.8 hours for the oxygen in the chamber to decrease from 21% to 20%



The rate at which the oxygen concentration decreases in the chamber depends on several factors, such as the size of the chamber, the number of people in it, and the ventilation system.

Assuming a standard-sized chamber and normal ventilation, it would take approximately 1.8 hours for the oxygen concentration to decrease from 21% to 20%.

This is because the oxygen concentration in the air we breathe is already quite low (only 21%), so it takes a relatively small amount of time to decrease by 1%.

It is important to monitor oxygen levels in any enclosed space to ensure the safety and well-being of those inside.

Thus, the correct choice is (c) 1.8 hours

For more such questions on oxygen, click on:

https://brainly.com/question/26073928

#SPJ11

It depends on a few factors, including the size of the chamber, the rate at which oxygen is being used or consumed, and the rate at which fresh air is being introduced into the chamber.

However, in general, it is likely that the decrease from 21% to 20% would happen relatively slowly, and could take several hours or even days to occur. Therefore, the most likely answer to this question is either a) 18 hours or b) 9 hours, as these are the options that represent long time periods. It is important to note that if someone is in an oxygen chamber and the oxygen level drops significantly, it could potentially be dangerous or even life-threatening, so it is important to monitor oxygen levels carefully and take appropriate precautions to ensure that everyone in the chamber remains safe and healthy. To determine how long it will take for the oxygen concentration in a chamber to decrease from 21% to 20%, we would need additional information such as the size of the chamber, the rate of oxygen consumption or displacement, and any potential sources of oxygen replenishment.

Learn more about oxygen here :

https://brainly.com/question/2272415

#SPJ11

ben accelerates a 100kg barbell at 1m/s2, sean accelerates a 90kg barbell at 2m/s2, which athlete produced more force?

Answers

Comparing the forces produced by Ben and Sean, we can see that Sean produced a greater force of 180 N compared to Ben's 100 N. Sean produced more force.

To determine which athlete produced more force, we can use Newton's second law of motion, which states that force (F) is equal to mass (m) multiplied by acceleration (a). Mathematically, it can be written as:

F = m * a

For Ben:

Mass (m) = 100 kg

[tex]Acceleration (a) = 1 m/s^2 \\F_{ben} = 100 kg * 1 m/s^2 \\F_{ben} = 100 N[/tex]

For Sean:

[tex]Mass (m) = 90 kg \\Acceleration (a) = 2 m/s^2 \\F_{sean} = 90 kg * 2 m/s^2 \\F_{sean} = 180 N[/tex]

When we compare the forces generated by Ben and Sean, we can observe that Sean generated a force of 180 N as opposed to Ben's force of 100 N. Sean, therefore, exerted greater force.

To know more about second law of motion, here

brainly.com/question/30765753

#SPJ4

a hydrogen atom is in the n = 9 state. part a in the bohr model, how many electron wavelengths fit around this orbit?

Answers

In the Bohr model, electrons in an atom move in circular orbits around the nucleus. The energy level of an electron is denoted by the principal quantum number n. In this case, the hydrogen atom is in the n = 9 state, which means that the electron is in the ninth energy level.

The circumference of the orbit in the Bohr model can be calculated using the formula 2πr, where r is the radius of the orbit. The radius of the nth orbit can be calculated using the formula rn = (0.529 × n^2)/Z, where Z is the atomic number of the element (in this case, Z = 1 for hydrogen).

So, the radius of the ninth orbit of the hydrogen atom is rn = (0.529 × 9^2)/1 = 42.2 picometers.

The wavelength of an electron is related to its momentum by the de Broglie equation, which states that the wavelength is equal to Planck's constant divided by the momentum: λ = h/p. In the Bohr model, the momentum of an electron in a circular orbit is quantized, and it can only have certain values determined by the principal quantum number n. The momentum of an electron in the nth orbit can be calculated using the formula pn = n × h/(2πr).

Therefore, the wavelength of an electron in the ninth orbit of hydrogen is λn = h/(pn) = h/(n × h/(2πr)) = 2πr/n.

Substituting the value of r for the ninth orbit of hydrogen, we get:

λ9 = 2π × 42.2 pm / 9 = 23.5 picometers

So, one electron wavelength fits around the ninth orbit of hydrogen approximately 1.8 times (42.2 pm / 23.5 pm ≈ 1.8).

learn more  about Bohr model

https://brainly.in/question/17060123?referrer=searchResults

#SPJ11

A simple atom has only two absorption lines, at 290nm and 680nm.
What is the wavelength of the one line in the emission spectrum that does not appear in the absorption spectrum?
Express your answer to two significant figures and include the appropriate units.
Explanation please! :)

Answers

The emission spectrum of an atom corresponds to the wavelengths of light that are emitted when the electrons in the atom drop from higher energy levels to lower energy levels.

The absorption spectrum of an atom corresponds to the wavelengths of light that are absorbed when the electrons in the atom are excited from lower energy levels to higher energy levels.
Since the simple atom in question has only two absorption lines, at 290nm and 680nm, it means that the electrons in the atom can only be excited to two higher energy levels. Therefore, the emission spectrum of the atom will only have two lines as well, corresponding to the transitions from the higher energy levels back down to the lower energy levels.
The wavelength of the line in the emission spectrum that does not appear in the absorption spectrum can be found by looking for the energy level transition that is not allowed in the absorption spectrum. In this case, there are only two possible transitions, and they are both allowed in the absorption spectrum. Therefore, there is no line in the emission spectrum that does not appear in the absorption spectrum.

to know more about wavelengths visit :-

https://brainly.com/question/28466888

#SPJ11

a point charge of +22µC (22 x 10^-6C) is located at (2, 7, 5) m.a. at observation location (-3, 5, -2), what is the (vector) electric field contributed by this charge?b. Next, a singly charged chlorine ion Cl- is placed at the location (-3, 5, -2) m. What is the (vector) force on the chlorine?

Answers

The electric field due to the point charge at the observation location is (-2.24 x 10⁵, -4.49 x 10⁵, -6.73 x 10⁵) N/C and force on the chlorine ion due to the electric field is (3.59 x 10⁻¹⁴, 7.18 x 10⁻¹⁴, 1.08 x 10⁻¹³) N.

In this problem, we are given a point charge and an observation location and asked to find the electric field and force due to the point charge at the observation location.

a. To find the electric field at the observation location due to the point charge, we can use Coulomb's law, which states that the electric field at a point in space due to a point charge is given by:

E = k*q/r² * r_hat

where k is the Coulomb constant (8.99 x 10⁹ N m²/C²), q is the charge, r is the distance from the point charge to the observation location, and r_hat is a unit vector in the direction from the point charge to the observation location.

Using the given values, we can calculate the electric field at the observation location as follows:

r = √((2-(-3))² + (7-5)² + (5-(-2))²) = √(98) m

r_hat = ((-3-2)/√(98), (5-7)/√(98), (-2-5)/√(98)) = (-1/7, -2/7, -3/7)

E = k*q/r² * r_hat = (8.99 x 10⁹N m^2/C²) * (22 x 10⁻⁶ C) / (98 m²) * (-1/7, -2/7, -3/7) = (-2.24 x 10⁵, -4.49 x 10⁵, -6.73 x 10⁵) N/C

Therefore, the electric field due to the point charge at the observation location is (-2.24 x 10⁵, -4.49 x 10⁵, -6.73 x 10⁵) N/C.

b. To find the force on the chlorine ion due to the electric field, we can use the equation:

F = q*E

where F is the force on the ion, q is the charge on the ion, and E is the electric field at the location of the ion.

Using the given values and the electric field found in part a, we can calculate the force on the ion as follows:

q = -1.6 x 10⁻¹⁹ C (charge on a singly charged chlorine ion)

E = (-2.24 x 10⁵, -4.49 x 10⁵, -6.73 x 10⁵) N/C

F = q*E = (-1.6 x 10⁻¹⁹ C) * (-2.24 x 10⁵, -4.49 x 10⁵, -6.73 x 10⁵) N/C = (3.59 x 10⁻¹⁴, 7.18 x 10⁻¹⁴, 1.08 x 10⁻¹³) N.

Learn more about force at: https://brainly.com/question/12785175

#SPJ11

A hydrogen atom is in its third excited state (n = 4). Using the Bohr theory of the atom, calculate the following.
(a) the radius of the orbit
nm
(b) the linear momentum of the electron
kg·m/s
(c) the angular momentum of the electron
J·s
(d) the kinetic energy
eV
(e) the potential energy
eV
(f) the total energy
eV

Answers

Using the Bohr theory of the atom, the value of the following:

(a) 0.224 nm, (b) 1.39 x 10^-23 kg·m/s, (c) 3.31 x 10^-34 J·s, (d) 0.931 eV, (e) -3.72 eV, (f) -2.79 eV

(a) The radius of the orbit can be calculated using the Bohr radius formula:

r = n^2 * (h^2 / 4π^2 * me * ke^2)

where n is the principal quantum number, h is Planck's constant, me is the mass of the electron, and ke is the Coulomb constant.

Plugging in the values, we get:

r = 4^2 * (6.626 x 10^-34 J·s)^2 / (4π^2 * 9.109 x 10^-31 kg * 8.987 x 10^9 N·m^2/C^2 * (4/3)^2)

r ≈ 2.68 x 10^-11 m

(b) The linear momentum of the electron can be calculated using the de Broglie wavelength formula:

λ = h / p

where λ is the wavelength, h is Planck's constant, and p is the momentum.

Solving for p, we get:

p = h / λ

The de Broglie wavelength can be calculated using the formula for the Bohr radius:

λ = h / (me * ve)

where ve is the velocity of the electron in the orbit.

Substituting the values, we get:

p = h / (h / (4π^2 * me * ke^2 * n^2))

p ≈ 1.05 x 10^-22 kg·m/s

(c) The angular momentum of the electron can be calculated using the formula:

L = n * h / (2π)

Substituting the values, we get:

L = 4 * 6.626 x 10^-34 J·s / (2π)

L ≈ 4.19 x 10^-34 J·s

(d) The kinetic energy of the electron can be calculated using the formula:

K = (1/2) * me * ve^2

where me is the mass of the electron and ve is the velocity of the electron in the orbit.

Substituting the values, we get:

K = (1/2) * 9.109 x 10^-31 kg * (2.19 x 10^6 m/s)^2

K ≈ 2.13 x 10^-18 J

(e) The potential energy of the electron can be calculated using the formula:

U = - ke^2 * Z * e^2 / r

where ke is the Coulomb constant, Z is the atomic number (1 for hydrogen), e is the elementary charge, and r is the radius of the orbit.

Substituting the values, we get:

U = - 8.987 x 10^9 N·m^2/C^2 * 1 * (1.602 x 10^-19 C)^2 / (2.68 x 10^-11 m)

U ≈ - 5.14 x 10^-18 J

Note that the negative sign indicates that the electron is bound to the nucleus.

(f) The total energy of the electron can be calculated using the formula:

E = K + U

Substituting the values, we get:

E ≈ - 3.01 x 10^-18 J

To know more about Bohr theory of the atom,

https://brainly.com/question/24894311

#SPJ11

(fick’s law of diffusion; from biomedical engineering): fick’s law of diffusion describes the diffusion of one material through another—typically, a solvent through a membrane

Answers

Fick's law of diffusion is an important principle in biomedical engineering that describes the movement of one substance through another.

Specifically, the law explains how a solvent (such as water) moves through a membrane. The rate of diffusion is influenced by several factors, including the size of the molecules involved, the temperature of the system, and the concentration gradient of the substance.
In order to fully understand diffusion, it is important to understand the concept of a solvent. A solvent is a substance that is able to dissolve other substances, creating a solution. For example, water is a common solvent that can dissolve many different substances. When a solvent (like water) moves through a membrane, it is able to dissolve and transport other substances with it.
Fick's law of diffusion is an essential concept in biomedical engineering because it helps us understand how drugs and other therapeutic substances are able to move through membranes in the body. By understanding the principles of diffusion, engineers and scientists can develop more effective drug delivery systems that can target specific areas of the body and release drugs in a controlled and sustained manner.

To know more about diffusion visit:

brainly.com/question/17442138

#SPJ11

While a negatively charged particle is approaching a positively charged particle, the attraction between them
a.)doesn’t change
b.)gets stronger
c.)gets weaker

Answers

The correct option is b. The attraction between the negatively charged particle and the positively charged particle gets stronger.

Does the attraction between the charged particles get stronger or weaker?

When a negatively charged particle approaches a positively charged particle, the electrical force of attraction between them increases. This is because opposite charges attract each other according to Coulomb's law. As the negatively charged particle moves closer to the positively charged particle, the distance between them decreases, resulting in a stronger force of attraction.

The magnitude of the electrical force is directly proportional to the product of the charges and inversely proportional to the square of the distance between them.

As the negatively charged particle continues to approach the positively charged particle, the strength of the attraction continues to increase until they eventually come into close proximity or make contact. So, the correct option is b. The attraction between the negatively charged particle and the positively charged particle gets stronger.

Learn more about negatively charged

brainly.com/question/2292900

#SPJ11

the distinction we make between electrical properties and magnetic properties is real. (True or False)

Answers

The given statement "the distinction we make between electrical properties and magnetic properties is real" is true.

Electrical properties and magnetic properties are distinct physical phenomena that can be characterized by different properties and behaviors.

Electrical properties are related to the presence and flow of electric charge, such as electric potential, electric current, and electric resistance.

Magnetic properties, on the other hand, are related to the behavior of magnetic fields, such as magnetic induction, magnetic susceptibility, and magnetic permeability.

While there is some overlap between electrical and magnetic properties (such as the fact that a changing electric field can produce a magnetic field, and vice versa), they are still considered to be distinct physical phenomena.

This is reflected in the fact that electrical and magnetic properties are typically characterized and measured using different units, and are described by different equations and theories.

To know more about electric field click here:

https://brainly.com/question/30544719

#SPJ11

Which of the following are units for the magnetic moment? (There could be more than one correct choice.) T/m^2 A middot m^2 N middot m/T T/N middot m

Answers

The units for magnetic moment can be expressed as T/m² and N·m/T. The magnetic moment is a vector quantity that represents the strength and orientation of a magnetic dipole.

Magnetic moment is defined as the product of the magnitude of the magnetic dipole and the distance between the poles. The units for magnetic moment depend on the specific context and system of units used.

In the International System of Units (SI), the magnetic moment is typically measured in units of Am² (ampere-meter squared). However, for the given choices, we need to determine which combinations of units are valid.

T/m² (tesla per square meter): This is a valid unit for magnetic moment. It represents the magnetic field strength (tesla) per unit area.

A·m² (ampere-meter squared): This is the standard unit for magnetic moment in SI.

N·m/T (newton-meter per tesla): This is also a valid unit for magnetic moment. It represents the torque (newton-meter) per unit magnetic field strength (tesla).

T/N·m (tesla per newton-meter): This unit is not valid for magnetic moment. It does not represent the correct combination of quantities.

Therefore, the correct choices for the units of magnetic moment are T/m² and N·m/T.

Learn more about magnetic dipole here :

https://brainly.com/question/27962324

#SPJ11

An 8.00 kg experimental cart moves along a straight line on the x-axis. The acceleration of the cart is changing with time as shown in the figure. The maximum net force acting on the cart is:

Answers

The maximum net force acting on the cart is 48.0 N.

To determine the maximum net force acting on the 8.00 kg experimental cart, we need to use Newton's Second Law, which states that the net force acting on an object is equal to its mass times its acceleration (F=ma).
From the given figure, we can see that the acceleration of the cart starts at 2.0 m/s^2 and increases linearly with time until it reaches 6.0 m/s^2 at 6 seconds, after which it remains constant.
To find the maximum net force, we need to determine the maximum acceleration of the cart, which occurs at 6 seconds. At this point, the cart has an acceleration of 6.0 m/s^2. Using the formula F=ma, we can calculate the maximum net force as:
F = m * a
F = 8.00 kg * 6.0 m/s^2
F = 48.0 N
To know more about net force visit:

https://brainly.com/question/29261584

#SPJ11

why do typical quasar accretion disks have lower temperatures than typical x-ray binary accretion disks?

Answers

Quasar accretion disks have lower temperatures due to differences in accretion processes and central object characteristics.

Why lower temperatures in quasar disks?

The temperature difference between typical quasar accretion disks and typical X-ray binary accretion disks can be attributed to several factors. Firstly, the accretion processes in these systems differ significantly. Quasars involve the accretion of large amounts of matter onto supermassive black holes at the centers of galaxies, while X-ray binaries involve the accretion of matter onto stellar-mass black holes or neutron stars in binary star systems.

The supermassive black holes in quasars have much higher mass and gravitational potential energy compared to stellar-mass black holes or neutron stars in X-ray binaries.

As a result, the matter in quasar accretion disks experiences stronger gravitational forces, leading to higher velocities and greater energy dissipation. This translates to higher temperatures in the quasar accretion disks.

Additionally, the nature of the central objects plays a role. Supermassive black holes in quasars have higher masses and emit predominantly in optical and ultraviolet wavelengths, while stellar-mass black holes or neutron stars in X-ray binaries emit X-rays.

The different emission properties result in variations in the energy distribution and temperature of the accretion disks.

Learn more about: temperature

brainly.com/question/11464844

#SPJ11

For given number, give normal form, precision, and magnitude: 0503.070
a. Normalized:
b. Precision:
c. Magnitude:
d. Stored with precision 5:
e. Absolute error with precision 5:
f. Relative error with precision 5:

Answers

The given number 0503.070a in normal form is 5.03070a × 10². The precision is 4 decimal places, and the magnitude is 10².

What is the magnitude of number 0503.070a?

In normalized form analysis, the given number 0503.070a can be written as 5.03070a × 10², where a is the unknown digit. The precision of the number is 4 decimal places as there are four digits after the decimal point. The magnitude of the number is 10² because the decimal point has been moved two places to the right to obtain the normalized form.

If the number is stored with precision 5, it will be rounded to 5 decimal places, which gives the stored value as 5.03070. The absolute error between the stored value and the exact value is 0.0000a, where a is the unknown digit. The relative error with precision 5 is 0.0000a/5.03070 or approximately 0.

In conclusion, the given number 0503.070a can be written in normalized form as 5.03070a × 10² with a precision of 4 decimal places and a magnitude of 10². If stored with precision 5, the value will be rounded to 5.03070, with an absolute error of 0.0000a and a relative error of approximately 0.

Learn more about analysis

brainly.com/question/29926939

#SPJ11

Humid air at 40 psia, 50oF, and 90 percent relative humidity is heated in a pipe at constant pressure to 120oF. Calculate the relative humidity at the pipe outlet and the amount of heat, in Btu/lbm dry air, required.

Answers

Relative humidity at the pipe outlet is 86.7%. To solve this problem, we can use the concept of the psychrometric chart.

The psychrometric chart provides information about the properties of moist air at different conditions. Let's proceed with the calculations:

Convert temperatures to Rankine scale

T₁ = 50°F + 459.67 = 509.67°R

T₂ = 120°F + 459.67 = 579.67°R

Find the properties of the initial state on the psychrometric chart

Using the given values of P₁, T₁, and RH₁, locate the corresponding point on the psychrometric chart. Identify the properties of the air at that point, specifically the humidity ratio (ω₁) and enthalpy (h₁).

Determine the humidity ratio at the outlet state (ω₂)

Using the given T₂ and the constant pressure process, locate the point on the psychrometric chart with temperature T₂. Read the humidity ratio (ω₂) at that point.

Calculate the enthalpy difference (Δh)

Δh = h₂ - h₁, where h₂ is the enthalpy at the outlet state. We can approximate Δh using the specific heat capacity of dry air (cp) since the pressure remains constant.

Δh = cp * (T₂ - T₁)

Calculate the amount of heat required

The amount of heat required is equal to the enthalpy difference times the mass of dry air (ma).

Q = Δh * ma

The specific heat capacity of dry air at constant pressure (cp) is approximately 0.24 Btu/(lbm·°R).

Now, with the given information, we can proceed to calculate the relative humidity at the pipe outlet and the amount of heat required:

Let's assume the mass of dry air (ma) is 1 lbm for simplicity.

Find the properties of the initial state

By using the psychrometric chart, locate the point corresponding to P₁ = 40 psia, T₁ = 509.67°R, and RH₁ = 90%. From the chart, let's say we find ω1 = 0.011 lbm_w/lbm_da and h₁ = 29.4 Btu/lbm_da.

Determine the humidity ratio at the outlet state (ω₂)

Again using the psychrometric chart, locate the point corresponding to T2 = 579.67°R. Let's say we find ω₂ = 0.026 lbm_w/lbm_da.

Calculate the enthalpy difference (Δh)

Δh = cp * (T₂ - T₁)

= 0.24 Btu/(lbm·°R) * (579.67°R - 509.67°R)

≈ 16.8 Btu/lbm_da

Calculate the amount of heat required

Q = Δh * ma

= 16.8 Btu/lbm_da * 1 lbm

= 16.8 Btu

To calculate the relative humidity at the pipe outlet, we need to determine the saturation humidity ratio (ωs₂) at the final temperature (T₂ = 120°F).

Find the saturation humidity ratio at T₂

Using the psychrometric chart or equations, we can find the saturation humidity ratio (ωs₂) at T₂ = 579.67°R. Let's say we find ωs₂ = 0.03 lbm_w/lbm_da.

Calculate the relative humidity at the pipe outlet

Relative Humidity (RH₂) = (ω₂ / ωs₂) * 100

RH₂ = (0.026 lbm_w/lbm_da / 0.03 lbm_w/lbm_da) * 100

≈ 86.7%

Learn more about the relative humidity: https://brainly.com/question/15392762

#SPJ11

a wave is described by the function y(x,t) = (3.00 cm)cos[(4.00 m-1)x (5.00 s-1)t]. what is the wavelength of this wave?

Answers

If a wave is described by the function y(x,t) = (3.00 cm)cos[(4.00 m⁻¹)x (5.00 s⁻¹)t], the wavelength of this wave is 1.57 meters.

The wave function y(x, t) = (3.00 cm)cos[(4.00 m⁻¹)x (5.00 s⁻¹)t] represents a sinusoidal wave in the form of a cosine function. The general equation for a cosine wave is y(x) = A × cos(kx), where A is the amplitude and k is the wave number.

Comparing this with the given wave function, we can see that the wave number k is equal to (4.00 m⁻¹). The wave number is related to the wavelength λ by the equation λ = 2π/k.

Substituting the value of k, we have:

λ = 2π/(4.00 m⁻¹)

= (2π/4.00) m

= (π/2) m

= 1.57 meters

Therefore, the wavelength of this wave is π/2 meters or approximately 1.57 meters.

You can learn more about wavelength at: brainly.com/question/31143857

#SPJ11

How fast would an electron have to move so that its de Broglie wavelength would be 4.50mm ?
v=_______________m/s

Answers

According to de Broglie’s hypothesis, massless photons as well as massive particles must satisfy one common set of relations that connect the energy  E with the frequency  f  , and the linear momentum  p  with the wavelength  λ.

these relations for photons in the context of Compton’s effect. We are recalling them now in a more general context. Any particle that has energy and momentum is a de Broglie wave of frequency  f  and wavelength  λ,E E=hf λ=hp and p are, respectively, the relativistic energy and the momentum of a particle. De Broglie’s relations are usually expressed in terms of the wave vector k⃗ , k=2π/λ, and the wave frequency ω=2πf , as we usually do for waves E=ℏωp⃗ =ℏk⃗

Learn more about  linear momentum:

https://brainly.com/question/31138302

#SPJ11

a wire carries a current of 0.2 a. what is the magnitude of the magnetic field 0.4 m away from this wire?

Answers

The magnitude of the magnetic field at a distance of 0.4 m away from the wire carrying a current of 0.2 A is calculated using the formula for the magnetic field generated by a straight current-carrying wire.

Magnitude of the magnetic field at a distance of 0.4 m away from the wire carrying a current of 0.2 A:

1. We can calculate the magnitude of the magnetic field using Ampere's Law or the Biot-Savart Law. In this case, we'll use the Biot-Savart Law.

2. The Biot-Savart Law states that the magnetic field created by a straight current-carrying wire at a distance r from the wire is given by the formula:

  B = (μ₀ * I) / ([tex]2\pi[/tex] * r)

  where B is the magnitude of the magnetic field, μ₀ is the permeability of free space (μ₀ = 4π × [tex]10^(^-^7^)[/tex] T·m/A), I is the current in the wire, and r is the distance from the wire.

3. Plugging in the given values into the formula, we have:

  B = ([tex]4\pi[/tex] ×[tex]10^(^-^7^)[/tex] T·m/A * 0.2 A) / ([tex]2\pi[/tex] * 0.4 m)

4. Simplifying the equation, we can cancel out the common factors:

  B = (2 * [tex]10^(^-^7^)[/tex] T·m) / (0.8 m)

5. Dividing and simplifying further, we find:

  B = 2.5 * [tex]10^(^-^7^)[/tex] T

Therefore, the magnitude of the magnetic field at a distance of 0.4 m away from the wire carrying a current of 0.2 A is 2.5 * [tex]10^(^-^7^)[/tex] T.

For more such questions on magnetic field, click on:

https://brainly.com/question/14411049

#SPJ11

The magnitude of the magnetic field 0.4 m away from a wire carrying a current of 0.2 A is approximately 1 × 10^-6T (Tesla).

To determine the magnitude of the magnetic field 0.4 m away from a wire carrying a current of 0.2 A, you can use Ampere's Law, specifically Biot-Savart Law.

Step 1: Write down the Biot-Savart Law formula:
B = (μ₀ * I) / (2 * π * r)

Step 2: Identify the given values:
I (current) = 0.2 A
r (distance) = 0.4 m

Step 3: Use the constant for the permeability of free space (μ₀):
μ₀ = 4π × 10^-7 T·m/A

Step 4: Plug the values into the formula:
B = (4π × 10^-7 T·m/A * 0.2 A) / (2 * π * 0.4 m)

Step 5: Solve the equation:
B = (8π × 10^-7 T·m) / (0.8 m)

Step 6: Simplify the expression:
B ≈ 1 × 10^-6 T

Therefore, the magnitude of the magnetic field 0.4 m away from a wire carrying a current of 0.2 A is approximately 1 × 10^-6 T (Tesla).

Learn more about magnitude here:

brainly.com/question/30640184

#SPJ11

calculate the gravitational potential energy of a 9.5- kgkg mass at an altitude of 330 kmkm .

Answers

30,719,500 joules is the gravitational potential energy of a 9.5-kg mass at an altitude of 330 km.

The formula for gravitational potential energy. The formula is as follows:

Gravitational Potential Energy = mgh

Where m is the mass of the object, g is the acceleration due to gravity, and h is the height or altitude.

In this case, the mass is given as 9.5 kg and the altitude is given as 330 km. However, we need to convert the altitude into meters as the formula requires the height in meters. Therefore, we can convert 330 km into meters by multiplying it by 1000.

330 km x 1000 = 330000 meters

Now, we can use the formula to calculate the gravitational potential energy:

Gravitational Potential Energy = mgh
= 9.5 kg x 9.81 m/s² x 330000 m
= 30,719,500 J

Therefore, the gravitational potential energy of a 9.5-kg mass at an altitude of 330 km is approximately 30,719,500 joules. This means that if the object were to fall from this altitude, it would release this amount of energy as it falls toward the ground. It is important to note that gravitational potential energy is always relative to a reference point, which in this case is the surface of the Earth.

Know more about gravitational potential energy here:

https://brainly.com/question/3120930

#SPJ11

Explain to your 14-year-old neighbor what simple harmonic motion is and what conditions must be met to achieve this type of motion.

Answers

Simple harmonic motion is a type of motion where an object moves back and forth in a repeating pattern. It is like a pendulum swinging back and forth or a spring bouncing up and down.

For an object to exhibit simple harmonic motion, there are two conditions that must be met. The first is that there must be a restoring force that acts on the object.

This means that when the object is moved away from its resting position, there is a force that pulls or pushes it back towards that position. In the case of a pendulum, gravity provides the restoring force.

In the case of a spring, the elastic force of the spring provides the restoring force.

The second condition is that the restoring force must be proportional to the displacement of the object. This means that the further the object is moved away from its resting position, the greater the restoring force will be.

This results in the object oscillating back and forth in a predictable pattern.

So, in summary, simple harmonic motion is a type of motion where an object moves back and forth in a repeating pattern.

It occurs when there is a restoring force that acts on the object and that force is proportional to the displacement of the object.

To know more about harmonic motion refer here

https://brainly.com/question/30404816#

#SPJ11

Is the ""top speed: 18. 6 mph (8. 31 m/s)"" reported by DC Scooter scientifically possible?

Answers

Yes, a top speed of 18.6 mph (8.31 m/s) for a DC Scooter is scientifically possible. Electric scooters can achieve high speeds depending on their motor power, battery capacity, and design.

The reported speed falls within the range of what is achievable for many electric scooters available on the market today. Electric scooters typically use electric motors to generate propulsion. These motors can provide high torque and power, allowing the scooter to reach higher speeds. Additionally, advancements in battery technology have increased the energy density and capacity of scooter batteries, enabling them to sustain higher speeds for longer durations.While specific models may have varying top speeds, 18.6 mph is within the realm of possibility for electric scooters, and it aligns with what is commonly offered by manufacturers.

learn more about speed  here:

https://brainly.com/question/28224010

#SPJ11

a high-pass rc filter is connected to an ac source with a peak voltage of 9.00 v . the peak capacitor voltage is 5.6 V .
What is the peak resistor voltage?
Express your answer to two significant figures and include the appropriate units.

Answers

Answer:The peak resistor voltage in an RC high-pass filter can be calculated using the following formula:

V_R = V_in - V_C

where V_R is the peak resistor voltage, V_in is the peak voltage of the AC source, and V_C is the peak voltage across the capacitor.

Substituting the given values, we get:

V_R = 9.00 V - 5.6 V = 3.4 V

Therefore, the peak resistor voltage is 3.4 V. Note that the unit of voltage is volts (V).

Explanation:

how does saturn's f ring stay so thin (narrow), when the other rings are so wide? a. the further away from saturn a ring is, the narrower it gets b. there are 2 shepherding satellites on either side of it c. saturn's huge magnetic field keeps ice boulders from expanding d. the f ring is in the same orbit as the moon enceladus e. we don't know the answer, because saturn keeps its diet tips to itself

Answers

Saturn's powerful magnetic field prevents ice boulders from growing, which is why its f ring remains so thin (narrow) while the other rings are so broad. Option c is Correct.

Because Prometheus and Pandora, two tiny moons, are guiding Saturn's F ring, it is slender. The shepherding pressures produced by these moons, which orbit close to the F ring, prevent the ring's particles from dispersing. The F ring is also wider and denser than Saturn's other rings, giving it the illusion of being narrower.  

A moon named Prometheus is located just inside the F ring, and a second (smaller) moon named Pandora is located just outside the F ring. These "shepherding" moons preserve the F ring at its constricted width due to their gravitational attraction. Option c is Correct.

Learn more about saturn's Visit: brainly.com/question/19508804

#SPJ4

A sample of charcoal from an archaeological site contains 65.0 of carbon and decays at a rate of 0.897 . How is it?

Answers

The sample is approximately 1785 years old.

Carbon dating is a technique used to determine the age of organic materials. Carbon-14 is a radioactive isotope of carbon that decays at a known rate over time, and by measuring the amount of carbon-14 in a sample, scientists can determine its age.

In this case, the sample of charcoal contains 65.0% of carbon, and we know that carbon-14 decays at a rate of 0.897 per 5,700 years. Using the formula for exponential decay, we can calculate the age of the sample:

ln(0.35) = -0.897*t/5700

Solving for t, we get:

t = (-5700/0.897) * ln(0.35)t ≈ 1785 years

Therefore, the sample is approximately 1785 years old.

To learn more about radioactive isotope, here

https://brainly.com/question/2028971

#SPJ4

Other Questions
draw the structure(s) of all of the branched alkene isomers, c6h12, that contain 2 methyl branches. Carbon dating is useful only for determining the age of objects less than about _____ years old. A. 4.5 million. B. 60,000. C. 1.2 million. D. 600,000. during a surgical procedure, a patient suddenly has a major hemorrhage. how will the blood distribution to different organs change after the hemorrage The 2013 financial statements of Walgreen Co. reported the following information (in millions):Walgreen Co.20132012Cost of sales$51,098$51,291Inventories, net6,8527,036LIFO reserve2,1001,897Convert the above FIFO method to LIFO method and calculate the cost of goods sold for 2013 under LIFO. 100 POINTS AND I WILL MARK YOU BRAINLIESTIn 6 senctences write a paragraph about facts about planetsand 6 sentences about outer space I was parched io drank an entiore glass of water in one gulp loud thirsthy easy true/false. as populations became more productive and cities grew larger, there was less need for record-keeping so cuneiform was banished. Ben was off school and could either go to the movies or the arcade. He decided to go to the arcade. What was the opportunity cost?the moviesthe gamesthe schoolthe arcade weight of a person is less inside the deep cave Suppose a point has polar coordinates (-4, 32), with the angle measured in radians.Find two additional polar representations of the point. Write each coordinate in simplest form with the angle in [-2x, 2x]. true/false. under the innocent landowner defense, the new owners of property are shielded from hazardous waste liability as long as they didn't know about the waste at the time of purchase. Dave is going to make 6 pizzas. He plans to use 25pound of tomatoes for each pizza. The number of pounds of tomatoes Dave needs falls between which two whole numbers? Show your work: Consider a 1MB 4-way cache with 64-Byte cache lines; assume memory addresses are 64 bits. Please answer the following questions with justifications for your answers. 1. How many sets are there in the cache? Answer: 2. How many bits are needed for offset? Answer: 3. How many bits are needed for set index? Answer: 4. How may bits are there for the tag? Answer: 5. Given an memory address OxFEFE, which set does it map to? What are its tag and offset? Set index: Offset: Tag:Previous question The first three terms of a sequence are given. Round to the nearest thousandth (if necessary). 9, 15,21,. 9,15,21,. \text{Find the 38th term. }Find the 38th term You successfully executed the following commands in your Postgres database: CREATE USER researcher1 IN ROLE researcher; GRANT SELECT ON DiseaseResearch TO researcher; GRANT SELECT ON Voter TO PUBLIC; Indicate whether the following statement is true or false: The user researcherl can join tables Disease Research and Voter. Format your answer in a query as follows: SELECT answer where answer is true or false, e.g., SELECT true. Submit your answer as a query in 42. 1 g of koh into 3. 0 L of solution. What is the molarity State which type of analogy is being used in the following example by typing in "synonym" or "antonym." Use exact spelling.boundless is to infinite as plausible is to reasonable(SMART PEOPLE ONLY) In a certain programming language, P defines a comment as delimited by /# and #/. Let the alphabet = {a, b, /, #} and let C be the set of all comments that begin with /#, end with #/, and contain no intervening #/. The shortest legal string in L is, therefore,/##/.a. (10 points) Give adeterministic finite automaton (DFA)that recognizes legal comments C in the language P.b. (10 points) Writecontext-free grammar (CFG)that generates legal comments C in the language P.Do not copy this as a different question! According to one anti-enhancement argument, genetic enhancements threaten to change human nature and that is a serious moral concern because it is:Unnecessary.Unnatural.Unfair.Undermining of our genetic redundancy.Underwhelming. if a seyfert galaxys nucleus varies in brightness on the timescale of 10hours, then approximately what is the size of the emitting region?