A battery-powered toy car pushes a stuffed rabbit across the floor.Part ADraw a free-body diagram for a car (assume that it is moving from left to the right).Draw the force vectors with their tails at the dot. The orientation of your vectors will be graded. The exact length of your vectors will not be graded but the relative length of one to the other will be graded.Part BDraw a free-body diagram for a rabbit.Draw the force vectors with their tails at the dot. The orientation of your vectors will be graded. The exact length of your vectors will not be graded but the relative length of one to the other will be graded.

the options that are on the electromagnetic spectrum are invisible light (including UV radiation, X-rays, and gamma rays) and microwaves.

What is electromagnetic spectrum?

The electromagnetic spectrum includes all types of electromagnetic radiation, which are waves of energy that travel through space. Sound waves, on the other hand, are not on the electromagnetic spectrum because they are mechanical waves that require a medium to travel through, such as air or water.

Alpha rays, also known as alpha particles, are not on the electromagnetic spectrum either. They are actually particles that consist of two protons and two neutrons and are emitted by some radioactive materials.

Invisible light is a term that refers to electromagnetic radiation that is not visible to the human eye. This includes ultraviolet (UV) radiation, X-rays, and gamma rays, which have shorter wavelengths and higher energy than visible light.

Microwaves are on the electromagnetic spectrum and have longer wavelengths and lower energy than visible light. They are often used for communication and cooking food.

Otonal waves are not a known type of wave and are not on the electromagnetic spectrum.

In summary, the options that are on the electromagnetic spectrum are invisible light (including UV radiation, X-rays, and gamma rays) and microwaves.

To know more about electromagnetic visit:-

https://brainly.com/question/1408043

#SPJ1

All but  option A: the plant is exposed to light condition must be present for the Calvin cycle reactions to occur.

The Calvin cycle is the biochemical process that takes place in the chloroplasts of plants, in which carbon dioxide is fixed into glucose molecules. This process involves several enzymes and molecules, but the energy needed to power the process comes from ATP and NADPH, which are produced during the light-dependent reactions that take place in the thylakoid membranes of the chloroplasts.

Therefore, light is required for the Calvin cycle to occur since it is the source of the energy that drives the reaction. However, all parts of the plant do not need to be exposed to light for the Calvin cycle to occur. Only the chloroplasts, which are found in the mesophyll cells of the plant, need to be exposed to light for photosynthesis to occur.

Learn more about Calvin cycle from

https://brainly.com/question/920840

#SPJ1

See full question below

all but which condition must be present for the calvin cycle reactions to occur?

The plant is exposed to light

water is not involved in any of the reactions

light energy is converted into chemical energy

provide the electrons needed to reduce NADP

Option D. The electromagnetic force is a force that acts on charged particles.

The electromagnetic force is a fundamental force of nature that acts on charged particles. It is one of the four fundamental forces of nature, the other three being the strong nuclear force, the weak nuclear force, and gravity. The electromagnetic force is responsible for all electromagnetic phenomena, including electricity, magnetism, and electromagnetic radiation. Charge is the property of matter that is responsible for the electromagnetic force.

All particles that have a charge, including electrons and protons, interact with the electromagnetic force. The electromagnetic force is mediated by the electromagnetic field, which is created by charged particles. When charged particles move, they create electromagnetic waves, which can travel through space at the speed of light.

The electromagnetic force is responsible for a wide range of phenomena, including the structure of atoms, the behavior of magnets, and the behavior of light. It is a very strong force, much stronger than the weak nuclear force and gravity, but weaker than the strong nuclear force. The electromagnetic force is responsible for the repulsion between like charges and the attraction between opposite charges. It is also responsible for the behavior of magnetic materials, such as iron, which can be magnetized by an external magnetic field.

Learn more about "electro magnetic force" at: https://brainly.com/question/3900938

#SPJ11

The external agent must do 0.037 J of work to stretch the spring 7.40 cm from its unstretched position.

To calculate the amount of work an external agent must do to stretch a spring 7.40 cm from its unstretched position, we need to use the formula:

[tex]W = (1/2) kx^2[/tex]

where:

W = work done by the external agent (in joules)

k = spring constant (in newtons/meter)

x = displacement from the unstretched position (in meters)

First, we need to convert the displacement from centimeters to meters:

x = 7.40 cm = 0.0740 m

Let us assume the spring constant is [tex]k[/tex].

Now, we can substitute the values into the formula:

[tex]W = (1/2) kx^2[/tex]

[tex]W = (1/2) (k \ N/m) (0.0740\ m)^2[/tex]

[tex]W = 0.037k \ J[/tex]

Hence work done by the external agent is [tex]0.037k\ J[/tex].

Learn more about spring:

https://brainly.com/question/14670501

#SPJ11

Answer:

The original mass of the substance was 10g.

Explanation:

The half-life of a radioactive substance is the amount of time it takes for half of the substance to decay. In this case, the half-life is 5 hours.

We can use the half-life formula to find the original mass of the substance:

N = N0 * (1/2)^(t/T)

where:

---N0 is the initial mass of the substance

---N is the remaining mass of the substance after time t

---T is the half-life of the substance

We know that after 20 hours, only half of the substance remains:

N = N0 * (1/2)^(20/5) = 0.5 * N0

If we solve for N0, we get:

N0 = N / 0.5 = 5g / 0.5 = 10g

Therefore, the original mass of the substance was 10g.

Answer: The force produced by piston B is 0.006 N.

Explanation:

No problem! We can convert the area of piston B to square meters to make the units consistent:

Area of piston B = 0.1 cm^2 = 0.1 x (0.01 m/cm)^2 = 0.00001 m^2

Now we can use the formula:

pressure = force/area

For piston A, we have:

pressure = 6 N / 0.01 m^2 = 600 Pa

So the pressure in the liquid is 600 Pa.

To find the force produced by piston B, we rearrange the formula:

force = pressure x area

Using the pressure we just found and the area of piston B, we get:

force = 600 Pa x 0.00001 m^2 = 0.006 N

So the force produced by piston B is 0.006 N.

1.) The rider's apparent weight during the launch (launched skyward with an acceleration of 4g, after which they experience a period of free fall) = 2400 N

2.) The rider's apparent weight during the period of free fall = zero / 0

The Power Tower ride is an amusement ride that launches passengers high up in the air before letting them freefall down towards the ground. The ride's name is derived from the tower structure, which is used to store the ride's energy before propelling passengers skyward. After a brief period of freefall, the ride decelerates passengers and gently lowers them back to the ground. The ride is designed to provide a thrilling experience while maintaining passenger safety.

For the Power Tower ride, a 60 kg rider's apparent weight is 2400 N during the launch:

(4g x 60 kg x 9.8 m/s²

= 2400 N

And it is zero during the free fall period (due to the absence of a supporting force).

Learn more about free fall here: https://brainly.com/question/30397832

#SPJ11

The effective current associated with an electron in the lowest energy state of the hydrogen atom in the Bohr model is 6.63×10-7 A.

To calculate the effective current, we can use the formula:

I = qv/T

where I is the effective current, q is the charge of the electron, v is its velocity, and T is the time period of its circular orbit.

In the lowest energy state of the hydrogen atom, the electron is in a circular orbit with a radius of 5.29×1011 m and a speed of 2.19×106 m/s. The time period of the orbit can be calculated using the formula for centripetal acceleration:

a = v^2/r

F = ma = (mv^2)/r

F = kQq/r^2

mv^2/r = kQq/r^2

T = 2pir/v

where F is the electrostatic force between the electron and the proton in the nucleus, k is Coulomb's constant, Q is the charge of the nucleus, q is the charge of the electron, m is the mass of the electron, and r is the radius of the orbit.

Substituting the given values, we get:

T = 2pi(5.29×10^(-11) m)/(2.19×10^6 m/s) = 2.42×10^(-16) s

Using the charge of an electron, q = -1.6×10^(-19) C, and the velocity calculated above, we get:

I = qv/T = (-1.6×10^(-19) C)(2.19×10^6 m/s)/(2.42×10^(-16) s) = -6.63×10^(-7) A

The negative sign indicates that the effective current is in the opposite direction of the electron's motion.

For more similar questions on Atomic Physics:

brainly.com/question/1805828

#SPJ11

We can use the motion equations to calculate how long the golf ball stayed in the air for and how far it travelled horizontally. Then, we break down the initial speed into its horizontal and vertical components:

Vx = 40 m/s times cos(65°) yields 16.94 m/s. Vy is 40 m/s times sin(65°) to get 35.59 m/s. All throughout the peloton's flight, the horizontal component of the speed remains constant, but the vertical component is affected by the peloton's acceleration because of its seriousness. We can use the following equation to determine how long the peloton stays in the air: h=Vy*t + (1/2)gt2 Where h is the highest height the peloton has ever reached (10 m), Vy is the vertical component of initial velocity (35.59 m/s), and g is the acceleration as a result of The gravity (-9.8 m/s2) and the amount of time the pelota is in the air. Taking t out of this equation gives us: g = t = (Vy sqrt(Vy2 + 2gh)) The positive solution must be used in order to determine the total amount of time the peloton is in the air: T is equal to (35.59 m/s + sqrt((35.59 m/s)2 + 2*(-9.8 m/s)*(10 m)) / (-9.8 m/s2). t = 4.03 s (aproximadamente) (aproximadamente) We can now calculate the horizontal distance travelled by the pelota during that time using the horizontal component of the initial speed: d = Vx * t d = (16.94 m/s) * (4.03 s) (4.03 s) d = 68.3 m As a result, the ball remained in the air for 4.03 seconds while travelling a horizontal distance of 68.3 metres with regard to the target.

learn more about horizontal here:

https://brainly.com/question/9083871

#SPJ4

White dwarfs are the result of the evolution of stars that are not massive enough to become neutron stars or black holes when they die and are what most stars become when they die. Option C) is correct.

A white dwarf is the final stage of evolution for low to intermediate-mass stars, including our Sun, after they have exhausted their nuclear fuel and shed their outer layers as a planetary nebula. The core of the star collapses to a very small, hot, and dense object that is supported against further collapse by electron degeneracy pressure. White dwarfs are not massive enough to become black holes or neutron stars, and they are not the same as brown dwarfs, which are failed stars that never ignited nuclear fusion in the first place. Therefore the correct answer is option C).

Learn more about white dwarf:

https://brainly.com/question/846970

#SPJ11

Answer:

Yo dude, if you had a beaker of liquid in outer space, it wouldn't push down on the bottom or the sides of the beaker like it would on Earth. In space, there's no gravity to make the liquid settle down, so it forms a round shape because of surface tension. So basically, the liquid would just float around in a ball inside the beaker. If you moved the beaker around, the liquid would just roll around with it like a bouncy ball.

1) The impulse delivered to the baseball by the baseball bat is 40 kg-m/s.

2) The impulse delivered to the baseball by the baseball bat is 5 kg-m/s.

3) The magnitude of the work done by the baseball bat on the baseball for the first player is 1800 Joules.

4) The work done by the baseball bat on the baseball for the second player is 225 Joules.

The impulse delivered to the baseball by the baseball bat for the first player (who bunts the ball) can be calculated by subtracting the final velocity of the ball (5 m/s) from the initial velocity of the ball (45 m/s). The impulse delivered to the baseball by the baseball bat is 40 kg-m/s.

The impulse delivered to the baseball by the baseball bat for the second player (who hits the fast line drive) can be calculated by subtracting the final velocity of the ball (50 m/s) from the initial velocity of the ball (45 m/s). The impulse delivered to the baseball by the baseball bat is 5 kg-m/s.

The magnitude of the work done by the baseball bat on the baseball for the first player (who bunts the ball) can be calculated by multiplying the impulse (40 kg-m/s) by the initial velocity of the ball (45 m/s). The magnitude of the work done by the baseball bat on the baseball for the first player is 1800 Joules.

The work done by the baseball bat on the baseball for the second player (who hits the fast line drive) can be calculated by multiplying the impulse (5 kg-m/s) by the initial velocity of the ball (45 m/s). The work done by the baseball bat on the baseball for the second player is 225 Joules.

Learn more about impulse, work done, magnitude at : https://brainly.com/question/14848283

#SPJ11

The appropriate visual analogies that correspond to the given scenarios are as follows:

A) The car traveling in a circle and the rain falling from the sky - this analogy corresponds to the Earth moving around the Sun and interacting with light from a distant star.

B) The car traveling in a straight line and the rain falling from the sky - this analogy corresponds to a person on the moving Earth observing the light from a distant star.

C) The car is stationary and the rain falls from the sky - this analogy corresponds to a person on a motionless Earth observing the light from a distant star.

As we know that the direction of the earth's motion around the sun continually changes during the year, and the apparent position of a star in the sky moves in a small loop, known as the aberration of starlight. Hence, the visual analogies that correspond to the given scenarios are as follows:'=

a) The Earth moving around the Sun and interacting with light from a distant star is analogous to the first picture, where the car is moving and it is raining. This visual analogy explains that when the Earth moves around the Sun and interacts with light from a distant star, it results in a small loop of light in the sky.

b) A person on the moving Earth observing the light from a distant star is analogous to the second picture, where a person is sitting inside the moving car and looking at the rain. This visual analogy explains that when a person is on the moving Earth and observes the light from a distant star, it creates an illusion in the sky.

c) A person on a motionless Earth observing the light from a distant star is analogous to the third picture, where a person is standing outside the car and looking at the rain. This visual analogy explains that when a person is on a motionless Earth and observes the light from a distant star, it appears as if the star is moving in a small loop in the sky.

Therefore, the appropriate visual analogies that correspond to the given scenarios are as follows: Image 1: The Earth moving around the Sun and interacting with light from a distant star image 2: A person on the moving Earth observing the light from a distant star image 3: A person on a motionless Earth observing the light from a distant star.

To learn more about stars follow

https://brainly.com/question/15854882

#SPJ11

Yes, it is possible for an object to be moving with a constant velocity even when force is exerted on the object. When an object is in a state of rest, a force is required to move it from that position.

Newton’s second law states that the acceleration of an object is directly proportional to the force exerted on it and inversely proportional to its mass. Thus, a larger force results in a greater acceleration of the object. If there is no force applied to the object, the object will remain stationary or move at a constant velocity.

However, if there is a force applied to the object, it will accelerate. If the force applied is balanced by an equal and opposite force, the object will continue to move with a constant velocity. An object in motion is said to be in equilibrium when the net force acting on the object is zero. When the net force acting on an object is zero, it moves at a constant velocity. Therefore, if a force is exerted on an object, it is possible for the object to be moving with a constant velocity if the forces are balanced.

Learn more about Newton's law here:

https://brainly.com/question/13447525

#SPJ11

Answer:

The Moon has no atmosphere so there is no drag on the capsule to slow its descent; parachutes will not work. Lunar landing vehicles were equipped with rocket engines that were fired by the pilot to provide lift — thrust in the opposite direction of descent — during the rapid descent to the Moon's surface.

The moon does not harbor any appreciable atmosphere. Therefore no parachute, no matter how large, will operate properly on the moon. Air is required in order to inflate the parachute and slow down the descending object. Remember geologist Harrison Schmidt, the ONLY scientist to visit the moon? He was one of the last two people to ever touch the lunar surface. (Apollo 17). He demonstrated what would happen when two objects of different masses were dropped simultaneously from about five feet above the moon’s surface. He dropped a hammer and a feather. They fell at the same rate and hit the surface at exactly the same instant! There was no atmosphere to cause the feather to flutter. Note: Careful observers may notice that in videos of the the descending Apollo Lunar Lander (“The Eagle has landed”) lunar dust is kicked up by the craft’s engines. The dust moves out in straight lines, not in billowing clouds! PROOF that the film was made in the airless void of the moon and NOT in some clandestine film studio on Earth. No moon landing hoax!

Answer:

Explanation:

no

The waves of which wavelength would have the hardest time diffracting through the doorway into the room is 100 meters. The correct answer is Option C.

Diffraction is the spreading of waves when they pass through a gap or go around the edge of an obstacle. Diffraction occurs when a wavefront interacts with an obstacle, such as a gap or edge, and the wavefront bends around it or spreads out. This occurs for any wave, such as light waves or sound waves, and may be observed in various natural and everyday occurrences.

Diffraction of waves:

It is directly proportional to the wavelength and inversely proportional to the size of the obstacle. When the width of an obstacle is similar to the wavelength of the wave, the amount of diffraction is the highest.

Wavelength, also known as lambda, is a concept in physics that refers to the distance between two adjacent peaks or troughs of a wave. It is usually given the symbol λ and is measured in meters. The distance between two wave crests or troughs is the wavelength of a wave. Waves of varying wavelengths are present in our environment. Waves with shorter wavelengths, such as gamma rays, X-rays, and UV radiation, are high in energy but have a low range, while waves with longer wavelengths, such as radio waves and microwaves, are low in energy but have a longer range.

Learn more about Diffraction here: https://brainly.com/question/8645206.

#SPJ11

Mean arterial pressure within the circulatory system is constantly monitored by (c) baroreceptors.

The mean arterial pressure (MAP) refers to the average blood pressure during a single cardiac cycle. This value is vital for determining a patient's cardiovascular health and monitoring their recovery. Baroreceptors are specialized nerve cells found in the walls of some arteries that monitor blood pressure and help regulate blood flow by responding to changes in arterial pressure.

The baroreceptor system is critical for maintaining blood pressure levels within a healthy range. Baroreceptors in the arterial system constantly monitor blood pressure and respond by stimulating the sympathetic nervous system if the blood pressure is too low. They also work in conjunction with chemoreceptors in the cardiovascular system to maintain blood pressure levels within a healthy range.

Learn more about pressure: https://brainly.com/question/28012687

#SPJ11

(a) The period of the pendulum on the moon would increase. (b) The period of the pendulum on the moon can be calculated using the formula [tex]T=2\pi\sqrt\dfrac{l}{g}[/tex]  where T is the period, L is the length of the pendulum, and g is the acceleration due to gravity. In this case, the period of the pendulum on the moon is approximately 8.12 times greater than the period of the pendulum on the earth..

The formula of the period of a simple pendulum is given as:

[tex]T=2\pi\sqrt\dfrac{l}{g}[/tex]

Where T is the time period of the pendulum, l is the length of the pendulum, and g is the acceleration due to gravity

.From the above formula, we can see that the period of a pendulum is inversely proportional to the square root of acceleration due to gravity.

Therefore, the period of the pendulum will be increased when the acceleration due to gravity decreased from earth to moon. The period of the pendulum on the moon would increase.

(b) The acceleration due to gravity on the moon is 0.17g. Therefore, the period of the pendulum on the moon can be determined by using the formula of the period of a simple pendulum.

[tex]T=2\pi\sqrt{\dfrac{l}{g}}\\T=2\pi\sqrt{\dfrac{l}{0.17g}[/tex]

Now, substituting the given values in the above equation:

[tex]T=2\pi\sqrt{\dfrac{l}{(0.17\times9.81)}}\\T=2\pi\sqrt{1.67l}\\T=2\pi\times1.29\sqrt{l}\\T=8.12\sqrt{l}[/tex]

Therefore, the period of the pendulum on the moon is 8.12 times greater than the period of the pendulum on the earth.

To know more about time period of pendulum, click on the below link:

https://brainly.com/question/29074269

#SPJ11

The term that Johana uses to describe the phenomenon where one side of the planet always faces the sun is "tidally locked".

What is TRAPPIST-1e?

TRAPPIST-1e is an exoplanet located in the TRAPPIST-1 system, which is a small, ultra-cool dwarf star located about 40 light-years away from Earth in the constellation Aquarius. TRAPPIST-1e is believed to be a rocky planet with a size and mass similar to Earth, and it orbits its star within the habitable zone, which is the region around a star where temperatures are just right for liquid water to exist on the surface. Because of these properties, TRAPPIST-1e is considered a potential candidate for the presence of life.

Johana is describing a phenomenon called "tidal locking" when she talks about Proxima-b and TRAPPIST-1e. Tidal locking occurs when a celestial object's rotation and revolution periods are equal, resulting in one side always facing the parent object. This happens because of the gravitational interaction between the two objects. In the case of planets orbiting their star, the gravitational forces of the star acting on the planet cause it to slow down its rotation over time until one side of the planet faces the star.

Learn more about TRAPPIST-1e from given link

https://brainly.com/question/30024119

#SPJ1

the correct answer is option (C). If the ball is the system, and the Earth is the surroundings, the change in potential energy, ΔUsys of the system is mgh, and the work done, Wsurr by the surroundings is 0. Therefore.

In this case, the ball is hurled straight up, reaching a height of h before briefly coming to a stop. We assume the ball to be the system and the Earth to be the surroundings in order to calculate the change in potential energy of the system and the work performed by the surroundings. The system's change in potential energy is mgh because the ball's gravitational potential energy grows as it ascends to a height of h. Yet, because the environment is not subjected to any labour from the ball during its rise and descent, there is no work done by the environment. 

learn more about surroundings here:

https://brainly.com/question/29429169

#SPJ4

The required potential energy stored in the spring-block system, when the second block is placed on the surface and the spring is compressed by twice the distance, is four times the original potential energy Em.

Let's denote the original potential energy when the spring is compressed by distance d as Em. When the spring is compressed, it exerts a restoring force given by Hooke's Law:

F = -kx,

Where F is the restoring force, k is the spring constant, and x is the displacement from the equilibrium position.

When the spring is compressed by distance d, the potential energy stored in the system is given by:

[tex]E_m = \dfrac{1}{2} kd^2[/tex]

Now, let's consider the situation when the second block of mass 2m is placed on the surface, and the spring is compressed by a distance 2d. Since the spring is compressed by twice the distance, the displacement is 2d. In this case, the potential energy stored in the system can be calculated as:

[tex]E_2 = \dfrac{1}{2} k((2d)^2) \\E_2= 4\times \dfrac{1}{2}k(d^2) \\E_2= 4E_m[/tex]

Therefore, the potential energy stored is four times the original potential energy Em.

Learn more about energy in spring here:

https://brainly.com/question/29795045

#SPJ6

When the ball is initially dropped, it is accelerated downward by gravitational force.

When the ball is released, it has potential energy that is transformed into kinetic energy as it accelerates downwards under the gravitational force.

At the moment the ball hits the ground, the kinetic energy is converted into elastic potential energy due to the compression of the ball's material.

As a result of this compression, the ball's motion is reversed, and the elastic potential energy is converted back into kinetic energy, which causes the ball to rise again.

This process of energy transformation continues until the ball reaches its maximum height, where its kinetic energy has been transformed back into potential energy.

Overall, the gravitational force plays a critical role in this process by providing the initial acceleration that allows the ball to fall toward the ground. Without this force, the ball would remain stationary in the air, unable to move in any direction.

Learn more about acceleration here:

https://brainly.com/question/460763

#SPJ11

Therefore, the speed of the test charge when it reaches the center of the square is 50.14 m/s

To find the speed of the test charge when it reaches the center of the square, use conservation of energy. The initial potential energy (PE) of the test charge is 0 as it is released from rest. The total energy (E) of the test charge is conserved as it moves towards the center of the square. Therefore, the initial kinetic energy (KE) of the test charge must equal the PE of the test charge when it reaches the center of the square.

The PE of the test charge at the center of the square is the sum of the electrostatic potential energy between the test charge and the two point charges, which is given by:

PE = (q0)(q1)/(4πɛ0L) + (q0)(q2)/(4πɛ0L)

Where L is the length of the side of the square and q1 and q2 are the charges of the two point charges.

We can then calculate the initial Kinetic energy of the test charge using the formula:

KE = 1/2mv2

Where m is the mass of the test charge and v is the speed of the test charge. We can equate the PE and KE to find the speed of the test charge:

KE = PE

1/2mv2 = (q0)(q1)/(4πɛ0L) + (q0)(q2)/(4πɛ0L)

v2 = 2(q0)(q1)/(m4πɛ0L) + 2(q0)(q2)/(m4πɛ0L)

v = √(2(q0)(q1)/(m4πɛ0L) + 2(q0)(q2)/(m4πɛ0L))

Substituting the values given in the question, we get:

v = √(2(2.40 x 108 C)(7.20 x 106 C)/(6.60 x 108 kg x 4π x 8.85 x 10-12 C2/Nm2 x 0.480 m) + 2(2.40 x 108 C)(7.20 x 106 C)/(6.60 x 108 kg x 4π x 8.85 x 10-12 C2/Nm2 x 0.480 m))

v = 50.14 m/s

Therefore, the speed of the test charge when it reaches the center of the square is 50.14 m/s.

For more such questions on Conservation of energy

https://brainly.com/question/166559

#SPJ11

The given unbalanced equation is:Al2(SO4)3 + Ca(OH)2 → Al(OH)3 + CaSO4

Chemical equations are balanced by adjusting the coefficients of the molecules on either side of the equation. To balance the equation, the same number of atoms should be present on both sides. To balance a chemical equation, the coefficient should be a whole number. The balanced equation should have the lowest common multiple coefficients for the molecules. Balancing the equation helps to understand the relationship between the reactants and the products involved in the chemical reaction.

To balance the above chemical equation, the coefficients should be added to the molecules on the left and right of the equation in order to have the same number of atoms on both sides. And the balanced chemical equation would look like this:

Al2(SO4)3 + 3 Ca(OH)2 → 2 Al(OH)3 + 3 CaSO4

In the balanced chemical equation, the coefficient in front of the CaSO4 is 3.

Learn more about Equation balance at:

brainly.com/question/20697123

#SPJ11      

Terrestrial planets are those within our Solar System composed of silicate rocks or metals, while Jovian planets are gas giants composed mainly of hydrogen and helium.

Terrestrial Planets:

- Small size
- High density
- Rocky or metallic composition
- Solid surfaces

Jovian Planets:

- Large size
- Low density
- Gas and liquid composition
- No solid surfaces

The four terrestrial planets in our Solar System are Mercury, Venus, Earth, and Mars. They have small sizes and high densities, and are composed mainly of silicate rocks or metals, with solid surfaces.

The four jovian planets are Jupiter, Saturn, Uranus, and Neptune. They have large sizes and low densities, and are composed mainly of hydrogen and helium gas and liquid. They do not have solid surfaces.

To know more about Terrestrial planets click on below link:

https://brainly.com/question/7952964#

#SPJ11

Complete question:

identify a planet as either terrestrial or jovian. Match the planet  to the appropriate category. Consider only the planets of our own solar system.

The given statement "Small aperture phone aperture stop doubly-telecentric full control over the light collection uniform across the entire field of view. Furthermore it would allow resolution to be uniform across the same field of view" is False.

Aperture refers to the opening in a camera lens that regulates the amount of light that enters a camera. The camera aperture is determined by the size of the lens opening, which may be adjusted using a ring on the lens. The smaller the opening, the larger the f-number, which reduces the amount of light entering the camera.

Resolution refers to the ability of a lens to capture an image in detail. The resolution of an image is measured in pixels, and it is directly proportional to the number of pixels in the image. The resolution of an image is determined by the size of the camera sensor, the pixel density, and the quality of the lens.

Doubly telecentric lenses are those that have a telecentric entrance pupil, a telecentric exit pupil, or both. The telecentric entrance pupil implies that the aperture stop is located at the entrance pupil's location. The telecentric exit pupil implies that the pupil is located at the aperture stop's location. The doubly telecentric means that both the entrance and exit pupils are at the same location. As a result, the lens is able to provide sharp images with uniform resolution across the entire field of view.

The given statement, "Small aperture phone aperture stop doubly-telecentric full control over the light collection uniform across the entire field of view. Furthermore it would allow resolution to be uniform across the same field of view" is False.

Learn more about Aperture and Resolution at : https://brainly.com/question/30389395

#SPJ11

Answer:

Horizontal-axis (HAWT) pros

Cons

Vertical-axis (VAWT) pros

Cons

The  correct option iD. Sand 20% Clay 20% Silt 60% best approximates the percentages of sand, clay, and silt in a silty loam.

Soil texture is the roughness or softness of soil or soil particles. Soil texture can either be smooth/soft or rough soil texture. The soil texture table helps to determine the percentages of sand, clay, and silt in a silty loam. Among the given options, the best approximation for the percentages of sand, clay, and silt in a silty loam is 20% sand, 60% silt, and 20% clay. Therefore, the correct option for the question is option D. Sand 20% Clay 20% Silt 60%So, this is the answer to your question.

More on soil: https://brainly.com/question/8395005

#SPJ11

It will take approximately 1.67 seconds for the car to go from a speed of 20.0 m/s to a speed of 25.0 m/s if the acceleration is 3.0 m/s².

[tex]v = u + at[/tex]

Given:

u = 20.0 m/s (initial velocity)

v = 25.0 m/s (final velocity)

a = 3.0 m/s² (acceleration)

Rearranging the equation, we get:

[tex]t= \frac{(v - u)}{a}[/tex]

Substituting the given values:

t =  [tex]\frac{(25.0 m/s - 20.0 m/s)}{3.0 m/s^{2} }[/tex]

t = 1.67 s

Speed is the measure of the rate at which an object moves. It is defined as the distance an object travels per unit of time. Speed is a scalar quantity and is expressed in units of distance per unit of time, such as meters per second (m/s) or kilometers per hour (km/h). It is important to note that speed does not tell us anything about the direction of motion or any changes in direction. This is where velocity comes in, which is a vector quantity that includes both speed and direction.

Speed can be either average or instantaneous. Average speed is the total distance traveled divided by the total time taken, while instantaneous speed is the speed at a particular instant in time. Speed can also be described in terms of velocity, which includes direction as well as magnitude.

To learn more about Speed visit here:

brainly.com/question/28224010

#SPJ4