The correct answer is D. The cardiovascular system carries oxygen to the organism's cells.
The cardiovascular system, also known as the circulatory system, is responsible for circulating blood throughout the body. The main function of the cardiovascular system is to deliver oxygen and nutrients to the body's cells and remove waste products like carbon dioxide.
The heart, blood vessels, and blood are the three main components of the cardiovascular system.
The heart pumps blood throughout the body, while blood vessels (arteries, veins, and capillaries) carry the blood to and from different parts of the body. Oxygen is carried by red blood cells in the blood and is delivered to the body's cells through the capillaries.
Without oxygen, cells cannot produce energy and carry out their essential functions, which can lead to cell death and ultimately, organ failure. Therefore, the cardiovascular system is critical for an organism's survival by ensuring that its cells receive the necessary oxygen and nutrients to carry out their functions.
For more question on oxygen click on
https://brainly.com/question/15457775
#SPJ11
Ashley placed a notebook and sugar cubes on a scale.
The notebook and cubes are balanced at the same level on the scale.
Which of these describes the mass of the notebook and sugar cubes?
Since the notebook and cubes are balanced at the same level on the scale, the mass of the notebook and sugar cubes are equal.
The correct option is C.
What is the mass of an object?The amount of matter that makes up every object or body is the greatest way to understand mass. Everything that we can see has mass. Examples of objects with mass include a table, a chair, your bed, a football, a glass, and even air.
Masses are measured using scales.
The most typical way to measure it is as inertial mass, which refers to an object's resistance to acceleration under the influence of a net force.
Learn more about the mass of objects at: https://brainly.com/question/2537310
#SPJ1
Complete question:
Ashley placed a notebook and sugar cubes on a scale.
The notebook and cubes are balanced at the same level on the scale.
Which of these describes the mass of the notebook and sugar cubes?
a. The mass of the notebook is greater than the mass of the sugar cubes
b. The mass of the notebook is less than the mass of the sugar cubes
c. The mass of the notebook is equal to the mass of the sugar cubes
One of the line in the emiion pectrum of odium ha a wavelength of 590 nm. What i the frequency of thi line?
The line which has the wavelength of 590 nm in the sodium emission spectrum is yellow light whose frequency in the spectrum of sodium is 5.09×1014 sec−1.
To explain this let’s understand that the speed of light is equal to the product of wavelength and frequency.
Speed of light i.e. c =3⋅10^8ms
Also the wavelength(v) = 590 nm/5.9⋅10−7m
Now putting the formula we can state that v=cλ
Using all this together we can find λ i.e. frequency will be division of wavelength by speed of light and the answer will be =5.09×1014 sec−1
(5.9*10-7m/ 3.10^8 ms)
The emission spectrum of any chemical element/compound helps us in understanding the frequencies of electromagnetic radiation whose emission is due to an atom/molecule which transits from any high energy state to the lower energy state.
Learn more about emission spectrum here:
https://brainly.com/question/12472637
#SPJ4
On which slope would you expect to find the least precipitation if winds blow against a mountain from the south?
west
east
south
north
Answer: North
Explanation:
Using the phase diagram for CO2, what phase is carbon dioxide in at -40°C
Carbon dioxide is in a solid state at -40°C.
What is a phase diagram?This refers to a graph that shows the limiting conditions for the three phases (solid, liquid, and gaseous phases) of a single substance or of a mixture of substances while undergoing changes in pressure and temperature or when combined with other variables, such as solubility and temperature.
The phase diagram for CO₂ shows that at temperatures below -109.3°F (-78.5°C) and pressures below 5.1 atm, CO₂ exists as a solid (dry ice). At temperatures above -109.3°F and pressures above 5.1 atm, CO₂ is a supercritical fluid.
Hence, at -40°C, CO₂ is in a solid state.
Learn more about carbon dioxide on
https://brainly.com/question/12668713
#SPJ1
The molar mass of o2 is 32. 0 g/mol. What mass, in grams, of o2 must react to form 3. 80 mol of al2o3? 60. 8 grams 81. 1 grams 122 grams 182 grams.
The mass of oxygen that must react is 182 g to form 3.80 mol Al₂O₃.
What are molar mass and mass?The molar mass of the substance is the sum of the atomic masses of the individual constituent atoms of the compound or molecule, whereas the mass of the substance is its weight.
The chemical process is depicted as follows:
4Al+3O₂⇒2Al₂O₃
According to the process, 3 moles of oxygen are needed to create 2 moles of aluminum oxide, hence 3.80 moles of aluminum oxide will require x moles of oxygen.
moles oxygen = 3/2 x 3.80 moles of aluminum oxide
moles oxygen = 5.7 moles
mass oxygen = moles x mass molar
mass oxygen = 5.7 x 32 g/moles= 182.4 g
Learn more about mass at https://brainly.com/question/28171334
#SPJ4
1s22s22p63s23p64s23d2 is the correct electron configuration for which of the following atoms?
a. Ca
b. Ti
c. Ge
d. Zr
The 1s² 2s²2p⁶ 3s² 3p⁶ 4s² 3d² is the correct electron configuration for the atoms is the b. Ti. The atomic number of the Ti is the 22.
The atomic number of the Ti is 22. The electronic configuration of the Ti is given below as :
Ti = 1s² 2s²2p⁶ 3s² 3p⁶ 4s² 3d²
The element name is the Titanium with the symbol Ti. The Titanium is the element belongs to the 3d block. The 3d elements are called as the transition elements. So, it is also called as the transition element. The valency of the Titanium is the 4.
To learn more about electronic configuration here
https://brainly.com/question/29757010
#SPJ4
What mass of HBO2 is produced from the
combustion of 53.2 g of B2H6?
The total mass of products produced from the combustion of 53.2 g of B2H6 is 105.63 g.
What is combustion?Combustion is a chemical reaction that involves the oxidation of a fuel that produces heat and light. During combustion, oxygen combines with the fuel to form new compounds, such as water vapor, carbon dioxide, and other gaseous products.
The combustion of B2H6 produces two moles of H2O and one mole of B2O3. The mass of H2O produced can be calculated by multiplying the moles of H2O by the molar mass of H2O, which is 18.015 g/mol. The mass of B2O3 produced can be calculated by multiplying the moles of B2O3 by the molar mass of B2O3, which is 69.6 g/mol.
Therefore, the mass of H2O produced from the combustion of 53.2 g of B2H6 is 2 x 18.015 g/mol = 36.03 g. The mass of B2O3 produced from the combustion of 53.2 g of B2H6 is 1 x 69.6 g/mol = 69.6 g.
The total mass of products produced from the combustion of 53.2 g of B2H6 is 36.03 g + 69.6 g = 105.63 g.
To learn more about combustion
https://brainly.com/question/13251946
#SPJ1
How many atoms are in 4 moles of MgCl2
Answer:
1 mole of any substance contains 6.02 x 1023 constituent particles, correct to three significant figures (avogadro constant).
Number of molecules of 4 moles of MgCl2 = 4 x 6.02 x 1023
In every molecule of MgCl2 there are 3 atoms.
Thus, number of atoms in 4 moles of MgCl2 = 3 x 4 x 6.02 x 1023 = 7.22 x 1024
C,Hist O,→ CO,+ H,O
C₂H₁6+
2
On the left and right sides of the reaction arrow of a balanced equation, the same number of each sort of atom is present.
Which equation with balance is accurate?On the left and right sides of the reaction arrow of a balanced equation, the same number of each sort of atom is present. The reactants go on the left side of the arrow when writing a balanced equation, and the products go on the right side.Chemical equations describe how chemical reactions happen. Reactants are in chemical equations on the left, yields are indicated by an arrow, and products are on the right.Chemical formulas and symbols are used in chemical equations to depict a chemical reaction symbolically.On the left and right sides of the reaction arrow of a balanced equation, the same number of each sort of atom is present.To learn more about balanced equation refer to:
https://brainly.com/question/26694427
#SPJ1
There are equal numbers of each type of atom on the left and right sides of the reaction arrow in the balanced equation.
What is balanced equation?There are equal numbers of each type of atom on the left and right sides of the reaction arrow in the balanced equation. When writing an balanced equation, reactants go to the left of the arrow and products go to the right.Chemical equations describe how chemical reactions occur. In chemical formulas, reactants are on the left, yields are indicated by arrows, and products are on the right.Chemical formulas and symbols are used in chemical equations to represent chemical reactions. There are equal numbers of each type of atom on the left and right sides of the reaction arrow in the balanced equation.to learn more about balanced equation from the given link:
https://brainly.com/question/7181548
#SPJ1
Question:
What is the balanced equation of CO2 h2o -> C6H12O6 o2?
The difference between doing compositional stoichiometry and reaction stoichiometry problems is:
There are mass/mole ratios of elements in compounds in compositional stoichiometry questions and mass/mole ratios of compounds in balanced equations in reaction-based stoichiometry problems.
Composition stoichiometry relates to the atomic structure of a chemical compound, whereas reaction stoichiometry refers to the quantity of compounds consumed or created during a chemical reaction. This is the main distinction between composition and reaction stoichiometry.
Chemically speaking, the term "stoichiometry" refers to the quantitative information about a chemical substance or chemical reaction. When the information pertains to a chemical compound, it is referred to as composition stoichiometry; when it pertains to a chemical reaction, it is referred to as reaction stoichiometry.
Learn more about stoichiometry here: https://brainly.com/question/14935523
#SPJ4
Calculate the mass of carbon and the mass of hydrogen in 82.0 g of propane.
Mass of the carbon is 7.44 g while the mass of the hydrogen is 0.4 g.
What is the mass of the carbon?We have to know that we can be able to obtain the masses of each of the atoms that can be found in the molecule that is called propane. You have to note that propane is a hydrocarbon and this means that the only two atoms there are carbon and hydrogen.
We then have;
Number of moles of the propane = mass/molar mass = 82.0 g/44 g/mol
= 1.86 moles
Number of moles of the carbon = 1.86 moles/3 = 0.62 moles
Mass of carbon = 0.62 mol * 12 g/mol = 7.44 g
Number of moles of hydrogen = 1.62/8 = 0.2 moles
Mass of the hydrogen = 0.2 moles * 2 g/mol = 0.4 g
Learn more about moles:https://brainly.com/question/26416088
#SPJ1
Answer the following questions regarding metals and alloys.
a. Describe metallic bonds.
b.
Explain how the metallic bonds give metals the ability to conduct electricity.
c. Compare the strength of iron and steel. Which is stronger? How do the bonds explain the difference
in strength?
d.
Compare the ductility or iron and steel-which is more ductile? How do the bonds explain the
difference in ductility?
Answer:
A. They are malleable, ductile, and conduct electricity.
Use the Henderson-Hasselbalch equation to calculate the pH of each solution.
a. a solution that is 0.135 M in HCIO and 0.155 M in KCIO
b. a solution that contains 1.05% CH NH by mass and 1.10%
CalsNH;Br by mass
c. a solution that contains 10.0 g of HCH;O, and 10.0 g of NaCH;Oz in 150,0 mL of solution
Use the Henderson-Hasselbalch equation, The pH of the solution of (A), (B), and (C) is 7.52, 11.1828, and 4.6444 respectively.
What is Henderson-Hasselbalch equation for acidic medium?A rough equation that depicts the link between a solution's pH or pOH, pKa or pKb, and the ratio of the concentrations of the dissociated chemical species is the Henderson-Hasselbalch equation. The equation requires knowledge of the acid dissociation constant.
Calculation-:(A) pH = Pka + log [Salt]/[Acid]
Pka of HClO = 7.46
∴ pH = 7046 + log 0.155/0.135 ⇒ pH = 7.52
(B) 1.05% C2H5NH2 by mass
weight of C2H5NH2 = 1.05 gm
gram molecular weight of C2H5NH2 = wt/G Mwt × n factor
⇒ 1.05/45 × 1
⇒ 0.0233
1.10 % C2H5NH3Br by mass
weight of C2H5NH3Br = 1.10 gm
Gram molecular weight of C2H5NH3br = 127
No. of equivalent of C2H5NH3Br = 1.10/127 × 1
⇒ 0.0086
It is a basic buffer
pH = 14-{Pka + log [C2H5NH3Br}/C2H5Nh2]}
pka for C2H5NH2 = 3.25
pH = 14 - { 3.25 + log [0.0086]/0.0233}
⇒pH = 14- { 3.25 + (-0.4328)
⇒pH = 14.4328-3.25
⇒pH = 11.1828
(C) weight of HC2H3O2 (CH3COOH) = 10.0g
Equivalent weight of Hc2H3O2 = 60
Normality of HC2H3O2 = wt/GM weight × 1000/Vml
⇒ 10/60 × 1000/150
⇒ 100/90 = 1.1111 N
Weight of NaC2H3O2 (CH3COONa)= 10.0g
Equivalent weight of NaC2H3O2= 82
⇒N= 10/82 × 1000/150
⇒1000/1230 = 0.8130 N
It is a Acidic buffer
pka for CH3COOH = 4.78
pH = pka + log [NaC2H3O2]/HC2H3O2}
⇒pH = 4.78 + log (0.8130)/1.1111
⇒pH = 4.78 + log (0.7317)
⇒pH = 4.78 + (-0.1356)
⇒pH = 4.78 -0.1356
⇒pH = 4.6444
To know more about Henderson-Hasselbalch equation visit:
https://brainly.com/question/13423434
#SPJ1
A flexible container holds 3.00mol of gas and occupies 10.0L. Some air is removed from
the container and there are now 1.90mol of gas in the container. Assume pressure
remains constant.
What is the final volume?
According to Avogadro's law, the final volume of container is 6.33 liters.
What is Avogadro's law?Avogadro's law is a gas law which states that the total number of atoms or molecules has a direct proportion to the volume occupied by a gas at a constant temperature and pressure.
It is closely related to ideal gas equation as it links temperature, pressure, volume and the amount of substance.It is given as, V∝n.
The straight line graph of volume versus moles is a straight line passing through the origin which implies that zero moles of gas occupy zero volume.
Substituting values in the formula, V₁/n₁=V₂/n₂ that is V₂=10×1.90/3=6.33 moles.
Thus, the final volume of gas is 6.33 liters.
Learn more about Avogadro's law,here:
https://brainly.com/question/6534668
#SPJ1
Increase of greenhouse gases, due to human activity, is melting sea ice at the poles. This causes changes in climate. Which three spheres interact in this process?.
The three spheres that interact in the process of melting sea ice due to increased greenhouse gases are the atmosphere, hydrosphere, and cryosphere.
The atmosphere contains the greenhouse gases that trap heat, causing the Earth's surface to warm. The hydrosphere is the sphere that contains the ocean, which absorbs a large amount of the heat caused by the greenhouse gases. The cryosphere is the sphere that contains the ice, which is melting as a result of the warming caused by the greenhouse gases in the atmosphere and the heat absorbed by the ocean in the hydrosphere.
To learn more about greenhouse gasses visit: https://brainly.com/question/21106299
#SPJ4
What material is the limiting ingredient if you have 6 eggs, 1 cup of milk, 3/4 tsp of ground cinnamon, 1 tsp of ground nutmeg, and 8 slices of bread
Answer:
Below
Explanation:
For 8 slices of bread you need
8 eggs<==== you do not have enough ( enough for 6 slices)
2 cups of milk <====== you do not have enough ( enough for 4 slices)
2 tsp of ground cinnamon <==== you do not have enough ( enough for 3)
2 tsp of ground nutmeg <===== you do not have enough (enough for 4)
SO ALL of the ingredients are limiting ingredients for the 8 slices of bread
you will run out of cinnamon first <==it is the MOST limiting
Answer: B ground cinnom
Explanation:
Draw all resonance structures for methylisocyanate, CH3NCO, a toxic gas used in the manufacturing of pesticides. Which resonance structures are the most important?
The methyl isocyanate, CH₃NCO is the toxic gas used for the manufacturing of the pesticides. All the three resonance structure are attached below.
The methyl isocyanate is the organic compound, which is a colorless. It is used in the manufacturing of the pesticides. The methyl carbon is sp³ hybridized. the nitrogen atom is sp² and the isocyanate carbon is sp hybridize and the oxygen atom is sp² hybridized.
The most important resonance structure for the metyl isocyanate is given below:
H
| .. ..
H - C - N = C = O :
|
H
The methyl isocyanate is vey toxic for humans from the acute exposure.
To learn more about resonance structure here
https://brainly.com/question/28671214
#SPJ4
How many grams of lioh are needed to make 100 ml of a 0.1 m solution?
0.24 g of LiOH are needed to make 100 ml of a 0.1 m solution.
What is LiOH?Lithium hydroxide (LiOH), commonly obtained by the reaction of lithium carbonate with lime, is used in making lithium salts (soaps) of stearic and other fatty acids; these soaps are widely used as thickeners in lubricating greases.
Lithium hydroxide is an inorganic compound with the formula LiOH. It can exist as anhydrous or hydrated, and both forms are white hygroscopic solids. They are soluble in water and slightly soluble in ethanol. Both are available commercially.
LiOH (Lithium hydroxide) is a base. It is because it releases OH– (hydroxide-ion) in water. According to theories, a substance that can accept a proton or donate electrons or react with acid is classified as a base. LiOH reacts with strong acid HCl that produce LiCl and water.
Determination of mass of LiOH required:The molarity of LiOH is 0.1M
The given volume is,
M = W1 × 1000/m1 × V(ml)
m1 = molecular mass of LiOH = 24
putting the values in the previous equation,
0.1 = W1 × 1000/24 × 100
W1 = 0.1 × 24 ×100/1000
⇒ 0.24 grams of LiOH is required.
To learn more about LiOH refers to:
brainly.com/question/8053370
#SPJ4
What is the molar mass of AI(CIO4)3?
Answer:
Molar mass is 325.33
Explanation:
Molar mass is 325.33
What are the complementary strands of DNA?
Answer:
Cell division
Explanation:
the complementary strands of DNA formed during cell division
Which organism makes its own food
An organism that can manufacture food on its own utilising light, water, carbon dioxide, or other chemicals is known as an autotroph.
Explain about an autotroph?
An organism that can manufacture food on its own utilizing light, water, carbon dioxide, or other chemicals is known as an autotroph. Autotrophs are occasionally referred to as producers since they grow their own nourishment.
A living thing that does not consume other organisms but instead obtains its own nourishment from inorganic sources or the environment. A heterotroph is an organism that cannot synthesis organic compounds from inorganic material and must receive its organic food molecules by consuming the waste of other organisms.
Given that they produce their own sustenance through photosynthesis, the majority of plants are autotrophs. There are, however, exceptions to every rule. A host serves as the food source for some parasitic, non-photosynthetic plants.
To learn more about an autotroph refer to:
https://brainly.com/question/10253663
#SPJ1
[See picture]
1.) Which solution is considered SATURATED at 50C (Celsius) when 50g of solute is able to dissolve in 100g of water?
2.) At 40C (Celsius), 40g of KNO3 are mixed. The solution would be considered saturated, supersaturated, or unsaturated?
Ammonium chloride is soluble in water at a rate of around 50 g per 100 g at 50 °C. Potassium nitrate is exceptionally soluble in water.so the solution is Unsaturated.
What are Saturated and Unsaturated Solutions?A saturated solution is one that has as much of the solute present as is capable of dissolving.
A solution is said to be unsaturated if it doesn't contain all of the solute that can dissolve in it.
NaCl, or table salt, easily dissolves in water. Imagine you have a beaker of water, and you add some salt while swirling to make sure it dissolves. More is added, and it dissolves. No matter how long or how vigorously you swirl it, the salt ultimately reaches a point where it will not dissolve any further. Why? We are aware, at the molecular level, that the water's action causes the individual ions to separate from the salt crystal and enter the solution, where they are kept hydrated by water molecules. Additionally, some of the dissolved ions crash with the crystal once more and stay there. Recrystallization is the process by which a dissolved solute transforms back into a solid.
The rate of recrystallization of the dissolved solute equals the rate at which the solid salt is dissolving at given location. The overall amount of dissolved salt remains constant after that stage is achieved. The physical state characterized by the opposing processes of dissolving and recrystallization is known as solution equilibrium.
The solubility of KNO3 at 40 degree Celsius
Ammonium chloride is soluble in water at a rate of around 50 g per 100 g at 50 °C. This indicates that a saturated solution will only develop at 50 degrees Celsius when 50 grams of ammonium chloride are dissolved in 100 grams of water.
Potassium nitrate is exceptionally soluble in water.so the solution is UNSATURATED .It states that the maximum of potassium nitrate 65 g is soluble at 40°C in 100 g of water.
To know more about Saturated and Unsaturated Solutions refer to:
https://brainly.com/question/530542
#SPJ1
Draw the unique stereoisomers for 2-chloro-2,3-dimethylpentane. Show stereochemistry clearly. To ensure proper grading, explicitly draw all four groups, including wedge/dash bonds, around a chirality center. Indicate whether the compounds could exist in an optically active form.
a. Could exist in optically active form b. cannot exist in optically active form c. cannot be determined
There are two stereoisomers possible for 2-chloro-2,3-dimethylpentane with two chiral carbons. Yes, this indicates that the compounds can exist in optically active form.
Optical isomerism is most common in substances that have the same molecular and structural formula but they cannot be superimposed on one another. Stereoisomers that rotate the plane of polarized light typically exhibit optical isomerism.
Chiral carbons are those that lack a plane of symmetry and have distinct attached groups.
Achiral molecules have a plane of symmetry and all of the groups attached to the central carbon atom are the same.
Molecules with chiral centers exhibit optical isomerism and may exist in an optically active form.
Learn more about optical isomers here
https://brainly.com/question/28044054
#SPJ4
Stainless steel is both acid and ______ proof.
what's the answer
Answer:
rust proof
Explanation:
Ammonia reacts with oxygen to form nitric oxide and water vapor:
4NH3 + 5O2 → 4NO + 6H2O
What is the theoretical yield of water, in moles, when 40.0 g NH3 and 50.0 g O2 are mixed and allowed to react?
Answer:
The answer is 20.3 g.
what is the device that most famously is used to find the molecular weight of a compound?
The device that is most famously used to find the molecular weight of a compound is a mass spectrometer.
A mass spectrometer is an analytical instrument that is used to measure the mass-to-charge ratio of charged particles. It works by ionizing a sample of the compound, accelerating the ions, and then measuring their masses using a magnetic or an electric field. The resulting mass spectrum can be used to determine the molecular weight of the compound, as well as its elemental composition and isotopic distribution. Mass spectrometry is widely used in chemistry, biochemistry, and other fields to identify and quantify molecules, and it is considered one of the most accurate and precise methods for determining molecular weight.
To learn more about molecular weight visit: https://brainly.com/question/24258041
#SPJ4
Is irony an expectation?
Irony is when appearances or expectations don't match up with reality.
Following are the types of irony;
A speaker uses verbal irony when they say one thing but mean another.Dramatic irony occurs when a show's audience is aware of a fictional character in literature is clueless.Situational irony is a deviation from the anticipated outcome and real outcomesExample of irony is
According to a Greek mythology, Oedipus will kill his father and wed his mother. To stop the prophecy from happening, his father abandoned him as a baby and left him to perish. Despite his efforts, it still occurred because Oedipus didn't pass away and was unaware of the identity of his parents.
To look more about irony click here
brainly.com/question/1695719
#SPJ4
How is the modern model of an atom different from previous models?
Bohr thought that electrons orbited the nucleus in circular paths; whereas in the modern model atomic electron structure is more like 3D standing waves.
Bohr improved on Rutherford's atomic model. The majority of the atom's mass is concentrated in its nucleus, which we now refer to as the center of the atom, and electrons surround the positive mass in a manner akin to a cloud. Bohr's use of the quantified energy to explain the model was his most important contribution. According to his theories, electrons around the nucleus have quantized potential and kinetic energy.
The model's quantification component is still thought to be sound in theory. The concept of electrons in circular orbits is the main issue. This violates the Heisenberg uncertainty principle, which states that it is impossible to simultaneously know a particle's position and momentum. Additionally, it does not eliminate the fact that atoms have a 3D formation. If the orbitals are circular, the 3D structure of an atom is not probable.
It was demonstrated that a standing wave energy level model fitted to the emission and absorption spectra of hydrogen using Schrödinger's equation. The distribution of electrons surrounding the nucleus is now described by scientists using the concept of a probability cloud.
Because the probability clouds only depict the likelihood of finding an electron in a given location and not its certainty, they are in compliance with the Heisenberg uncertainty principle. You may also see the clouds' standing wave-like shape if you look closely. Take a look at this illustration of the probability clouds for hydrogen.
Learn more about bohr models at https://brainly.com/question/20550290
#SPJ4
I need a description of the rocks and the unknown fossil.
Table E. Arrangement of Rocks in Geologic Time Scale and Identity of Unknown Fossil
The earliest rocks are Cambrian, followed by Ordovician, Devonian, and Permian rocks.
What are rocks?A rock is a naturally occurring substance made up of crystalline crystals consisting of various minerals that have fused together to form a solid mass.
It's possible or unlikely that the minerals that make up rock's composition developed at the same time.
On the earth's surface, igneous rocks—which are volcanic rocks—are widespread. They are created when molten material solidifies.
One of these is granite, which is created when magma solidifies underground.
Sedimentary rocks are those that are created from the eroded pieces of other rocks. Even the carcasses of plants or animals are used to create them.
Thus, the oldest rocks are therefore those that are Cambrian, followed by Ordovician, Devonian, and Permian in age.
For more details regarding rocks, visit:
https://brainly.com/question/19930528
#SPJ1
An object placed in a graduated cylinder raises the volume from 12. 2 ml to 14. 5 ml.
The Answer for the volume of the object is 2.3 milliliter.
What is the volume of the object placed in the graduated cylinder?Geometrically measuring the volume of an object with an irregular shape is frequently challenging and challenging. Utilizing the water displacement method is the simplest way to accomplish this. This approach is well-known for being straightforward and precise and is frequently taught in chemistry or other science classes. All you'll need is the appropriate tools.
How to find the volume of Irregularly Shaped Objects?Submerge the thing in the water. Take another look at the water level to see that it has risen. The new number of units that you measured in the beaker should be noted. The object is included in this level.
To calculate the volume of an item with an irregular shape, subtract the level with the object from the level with the object. If you used a regular beaker, the outcome might be in millimeters.
Determination of volume:Given,
Initial volume in the graduated cylinder ,V= 12.2 mL
Final volume of the graduated cylinder after placing an object ,V'= 14.5
Volume occupied by an object = v
The volume of an object will be equal to the volume modified by placing it into the graduate cylinder. So,
v = V' - V = 14.5 mL - 12.2 mL = 2.3 mL
Therefore the volume of the object is =2.3 milliliter
To know more about volume of the object refer to:
brainly.com/question/29805264
#SPJ4
The given question is incomplete, the complete question is:
An object placed in a graduated cylinder raises the volume from 12. 2 ml to 14. 5 ml. Find the volume of the object.