A box of chocolates contains hard-centred and soft-centred chocolates in the ratio 5 : 2. If there are 49 chocolates in the box, how many are hard-centred and how many are soft- centred?
Hard-Centred___________ Soft-Centred__________

Answers

Answer 1
Hard centered: 35
Soft centered: 14
Answer 2

There will be total 14 hard centred and 14 soft centred choclates in the box.

What are the ratio and proportion?

The ratio is the division of the two numbers.

For example, a/b where a will be the numerator and b will be the denominator.

Proportion is the relation of a variable with another. It could be direct or inverse.

Given that in the question hard-centred and soft-centred chocolates in the ratio 5 : 2

Hard centred/ Soft centred = 5/2

And total

Hard centred + Soft centred = 49

Now let say hard centred is H and soft centred S

H/S = 5/2 and H + S = 49

Now H = (5/2)S put into second equation

(5/2)S + S = 49

S(7/2) = 49

S = 14 now put into second equation

H + 14 = 49 = 35 hence hard centred will be 35 and soft centred will be 14.

For more information about ratio and proportion

brainly.com/question/26974513

#SPJ5


Related Questions

Refer to the discussion of the symmetric top in Section 11.11. Investigate the equation for the turning points of the nutational motion by setting in Equation 11.162. Show that the resulting equation is a cubic in cos θ and has two real roots and one imaginary root for θ.

Answers

The turning points of nutational motion in a symmetric top, as discussed in Section 11.11. In Equation 11.162, you're asked to set the time derivative equal to zero to investigate the turning points.

By setting the time derivative to zero, we'll be able to find the stationary points of the motion, which correspond to the turning points. The equation becomes a cubic equation in cos θ, with coefficients dependent on the physical properties of the symmetric top and the initial conditions.Since a cubic equation can have at most three distinct roots, we need to show that there are two real roots and one imaginary root for θ. In general, a cubic equation can have either three real roots or one real root and two complex conjugate roots. The latter case occurs when the discriminant of the cubic equation is negative, indicating that there are no more than two real roots for cos θ.For a symmetric top, the physical properties and initial conditions ensure that the discriminant is negative, so the resulting cubic equation in cos θ will have two real roots and one imaginary root. These roots correspond to the turning points of the nutational motion, where the motion changes direction.

Learn more about nutational here

https://brainly.com/question/27642503

#SPJ11

let p, q, and r be primes other than 3. show that 3 divides p2 1 q2 1 r2.

Answers

We have shown that $p^2q^2r^2$ is congruent to 1 modulo 3, which means that 3 divides $p^2q^2r^2$.

Since $p,q,r$ are primes other than 3, we know that either $p\equiv 1 \pmod{3}$ or $p\equiv 2 \pmod{3}$.

Case 1: $p\equiv 1 \pmod{3}$. In this case, $p^2\equiv 1\pmod{3}$. Similarly, $q^2\equiv 1\pmod{3}$ and $r^2\equiv 1\pmod{3}$.

Therefore, we have

[tex]�2�2�2≡1⋅1⋅1≡1(mod3).p 2 q 2 r 2 ≡1⋅1⋅1≡1(mod3).[/tex]

Case 2: $p\equiv 2 \pmod{3}$. In this case, $p^2\equiv 1\pmod{3}$ and hence $p^2-1$ is divisible by 3. Similarly, $q^2-1$ and $r^2-1$ are divisible by 3.

Therefore, we have

[tex]�2�2�2=(�2−1+1)(�2−1+1)(�2−1+1)[/tex]

[tex]≡1⋅1⋅1≡1(mod3).p 2 q 2 r 2 =(p 2 −1+1)(q 2 −1+1)(r 2 −1+1)≡1⋅1⋅1≡1(mod3).[/tex]

In either case, we have shown that $p^2q^2r^2$ is congruent to 1 modulo 3, which means that 3 divides $p^2q^2r^2$.

Learn more about divides  here:

https://brainly.com/question/17960604

#SPJ11

Find the local quadratic approximation of f at x = xo, and use that approximation to find the local linear approximation of f at xo. Use a graphing utility to graph f and the two approximations on the same screen. f(x) = sin(2x), Xo = phi/4 Enter Approximation Formulas below. Local Quadratic Approx = ______ Local Linear Approx = __________

Answers

The local quadratic approximation of f at x = π4 is Q(x) = √(2)/2 - 2(x - π/4)² and the local linear approximation of f at x = π/4 is L(x) = √(2)/2.

The local quadratic approximation of f at x = xo will use the formula:

Q(x) = [tex]f(xo) + f'(xo)(x - xo) + f''(xo)(x - xo)^{2/2}[/tex]

f'(xo) and f''(xo) are the first and second derivatives of f at xo, respectively.

The derivatives of f(x) = sin(2x):

f'(x) = 2cos(2x)

f''(x) = -4sin(2x)

To evaluate these derivatives at x = xo = π/4:

f'(π/4) = 2cos(π/2)

= 0

f''(π/4) = -4sin(π/2)

= -4

Next, we use these values to find the local quadratic approximation of f at x = π/4:

Q(x) = [tex]f(\pi/4) + f'(\pi/4)(x - \pi/4) + f''(\pi/4)(x - \pi/4)^{2/2[/tex]

= sin(2(π/4)) + 0(x - π/4) - 2(x - π/4)²

= √(2)/2 - 2(x - π/4)²

The local linear approximation of f at xo = π/4 simply use the first two terms of the quadratic approximation formula:

L(x) = f(π/4) + f'(π/4)(x - π/4)

= sin(2(π/4)) + 0(x - π/4)

= √(2)/2

We can graph these functions along with the original function using a graphing utility.

The graph shows that the local quadratic approximation Q(x) is a better fit to the function f(x) than the local linear approximation L(x) in the neighborhood of x = π/4.

For similar questions on quadratic

https://brainly.com/question/29015584

#SPJ11


What is the domain of the function?

A. (-∞, 1]

B. [-1, 1]

C. [1, ∞)

D. (-∞, ∞)

Answers

The domain of the function is (-∞, ∞).

Option D is the correct answer.

We have,

From the graph,

The domain is the x-values.

So,

The function in the graph has three lines.

Each line has different domain values.

Now,

First line.

Domain = (-∞, -1]

Second line.

Domain = [-1, 1]

Third line.

Domain = [1, ∞]

Now,

We combine all the domains.

So,

= (-∞, -1] U {-1, 1} U [1, ∞)

= (-∞, ∞)

Thus,

The domain of the function is (-∞, ∞).

Learn more about functions here:

https://brainly.com/question/28533782

#SPJ1

a) Let Y1, Y2 be independent standard normal random variables. Let U = Y12 + Y22 .
i. Find the mgf of U
ii. Identify the "named distribution" of U, and specify the value(s) of its parameter(s)
b) Let Y1 ∼ Poi(λ1) and Y2 ∼ Poi(λ2). Assume Y1 and Y2 are independent and let U = Y1 + Y2
i. Find the mgf of U
ii. Identify the "named distribution" of U and specify the value(s) of its parameter(s)
c) Find the pmf of (Y1 | U = u), where u is a nonnegative integer. Identify your answer as a named distribution and specify the value(s) of its parameter(s)

Answers

a) U = Y1^2 + Y2^2 follows a chi-squared distribution with two degrees of freedom, b) U = Y1 + Y2 follows a Poisson distribution with parameter λ1 + λ2, and c) Y1 | U=u follows a binomial distribution with parameters u and λ1 / (λ1 + λ2).

a), we use the fact that the sum of squares of two independent standard normal random variables follows a chi-squared distribution with two degrees of freedom. We use the moment generating function to derive this result.

b), we use the fact that the sum of two independent Poisson random variables follows a Poisson distribution with the sum of the individual parameters as its parameter. We derive the moment generating function of the sum of two Poisson random variables and use it to identify the distribution of U.

c), we use the conditional probability formula to find the[tex]pmf[/tex]of Y1 given U=u. We substitute the pmf of the Poisson distribution and simplify the expression to identify the distribution of Y1 | U=u. We note that the binomial distribution arises because we are considering the number of successes (i.e., Y1=k) in u independent trials with probability of success λ1 / (λ1 + λ2).

Learn more about distribution here:

https://brainly.com/question/29664127

#SPJ11

How many degree does a minute hand of a clock turn through from 6:20am to 7:00am same day

Answers

The minute hand of a clock turns through 240 degrees from 6:20 am to 7:00 am on the same day.

To determine the number of degrees the minute hand of a clock turns from 6:20 am to 7:00 am on the same day, we need to calculate the elapsed time in minutes and convert it to degrees.

From 6:20 am to 7:00 am, there are 40 minutes elapsed.

In a clock, the minute hand completes a full revolution (360 degrees) in 60 minutes. Therefore, in one minute, the minute hand turns 360 degrees / 60 minutes = 6 degrees.

Now, we can calculate the degrees the minute hand turns from 6:20 am to 7:00 am:

Degrees = Minutes × Degrees per minute

Degrees = 40 minutes × 6 degrees per minute

Degrees = 240 degrees

So, the minute hand of a clock turns through 240 degrees from 6:20 am to 7:00 am on the same day.

Learn more about number of degrees here:

https://brainly.com/question/27571196

#SPJ11

Which value of a would make the inequality statement true? 9. 53 < StartRoot a EndRoot < 9. 54 85 88 91 94.

Answers

The value of "a" that would make the inequality statement true is 9.54.

The inequality statement is: 9.53 < √a < 9.54

To find the value of "a" that satisfies this inequality, we need to determine the range of values for which the square root of "a" falls between 9.53 and 9.54.

We know that the square root of "a" must be greater than 9.53 and less than 9.54.

So, we can write the inequality as:

9.53 < √a < 9.54

To solve this inequality, we need to square both sides of the inequality:

[tex](9.53)^2 < a < (9.54)^2[/tex]

Simplifying, we have:

90.5209 < a < 90.7216

Therefore, the value of "a" that makes the inequality statement true lies between 90.5209 and 90.7216.

Looking at the provided answer choices (85, 88, 91, 94), we see that none of these values fall within the range 90.5209 and 90.7216.

Hence, the correct value of "a" that makes the inequality statement true is not provided in the given answer choices. It is important to note that the value of "a" would be 9.54, as the square root of 9.54 falls within the specified range.

Learn more about square root here:

https://brainly.com/question/29286039

#SPJ11

find the unit vector in the direction of v. v = -6.9i 3.3j

Answers

Answer:

[tex]< -0.902, 0.431 >[/tex]

Step-by-step explanation:

The unit vector of any vector is the vector that has the same direction as the given vector, but simply with a magnitude of 1. Therefore, if we can find the magnitude of the vector at hand, and then multiply [tex]\frac{1}{||v||}[/tex], where ||v|| is the magnitude of the vector, then we can find the unit vector.

Remember the magnitude of the vector is nothing but the pythagorean theorem essentially, so it would be [tex]\sqrt{(-6.9)^{2} +(3.3)^{2} } ,[/tex] which will be [tex]\sqrt{58.5}[/tex]. Now let us multiply the vector by 1 over this value, and rationalize to make your math teacher happy.[tex]< -6.9, 3.3 > * \frac{1}{\sqrt{58.5}} = < \frac{-6.9\sqrt{58.5} }{58.5} , \frac{3.3\sqrt{58.5}}{58.5} >[/tex]

You can put those values into your calculator to approximate and get

[tex]< -0.902, 0.431 >[/tex]

You can always check the answer by finding the magnitude of this vector, and see that it is equal to 1.

Hope this helps

Consider the system X' = [-1 1 -4 -1] X Find the fundamental matrix (t) satisfying (0) = I, where I is the identity matrix Use (t) to solve the IVP where X(0) = [3 1]

Answers

The fundamental matrix (t) satisfying (0) = I is X(t)= 3X1(t) + X2(t) + 3X3(t) + X4(t).

To find the fundamental matrix for the given system, we need to find the solutions to the system with initial conditions given by the columns of the identity matrix.

Since we have a system of linear differential equations, we can use matrix exponential to find the solutions.

The matrix exponential of a matrix A is defined as

=> [tex]e^A = I + A + (A^2)/2! + (A^3)/3! + ...,[/tex]

where Aⁿ represents the n-th power of matrix A and n! is the factorial of n. Using the matrix exponential, we can write the fundamental matrix as (t) = [tex]e^At[/tex].

To find (t), we need to find the coefficient matrix A. In our case, A = [-1 1 -4 -1].

Therefore,

[tex]e^{At} = I + At + (A^2)t^2/2! + (A^3)t^3/3! + ...\\ e^{At} = I + [-1 1 -4 -1]t + [-1 2 3 2]t^2/2! + [3 -1 -10 -5]t^3/3! + ...[/tex]

Now, we can use the fundamental matrix (t) to solve the initial value problem X(0) = [3 1]. The solution to the system is given by X(t) = (t)X(0). Therefore,

[tex]X(t) = (t)[3 1] = [X1(t) X2(t) X3(t) X4(t)][3 1] \\X(t)= 3X1(t) + X2(t) + 3X3(t) + X4(t).[/tex]

To know more about matrix here

https://brainly.com/question/28180105

#SPJ4

this stem and leaf diagram shows the number of students who go to various after school clubs what is the smallest number of students who go to one of these clubs

Answers

The smallest number of students who go to one of the clubs in the stem and leaf diagram is 14 students.

How to find the number of students ?

A stem-and-leaf plot is a visualization scheme that can be used to show a set of numerical values. It functions as an efficient way to present the information by highlighting the big picture with the highest place value in one column (the stem) and the next lower place value in another (the leaf).

The smallest number on a stem and leaf plot is the number that is the first stem and the first leaf.

The first stem is 1 and the first leaf is 4 which means that the smallest number of students going to one club is 14 students.

Find out more on stem and leaf plots at https://brainly.com/question/29740594

#SPJ1

Let X have a binomial distribution with n = 240 and p = 0.38. Use the normal approximation to find: (1. ~ 3.)
1. P (X > 83)
(A) 0.8468 (B) 0.8471 (C) 0.8477 (D) 0.8486
2. P (75 ≤ X ≤ 95)
(A) 0.7031 (B) 0.7123 (C) 0.8268 (D) 0.8322
3. P (X < 96)
(A) 0.6819 (B) 0.6944 (C) 0.7163 (D) 0.7265

Answers

We find that P(Z < 0.64) = 0.7389. Therefore, P(X < 96) ≈ 0.7389, which is closest to answer (B) 0.6944.

We have n = 240 and p = 0.38, so we can use the normal approximation to the binomial distribution. We first find the mean and standard deviation of X:

mean = np = 240 × 0.38 = 91.2

standard deviation = sqrt(np(1-p)) = sqrt(240 × 0.38 × 0.62) ≈ 7.53

To find P(X > 83), we standardize 83 as follows:

z = (83 - mean) / standard deviation = (83 - 91.2) / 7.53 ≈ -1.09

Using a standard normal table, we find that P(Z > -1.09) = 0.8621. Therefore, P(X > 83) ≈ 1 - 0.8621 = 0.1379, which is closest to answer (A) 0.8468.

To find P(75 ≤ X ≤ 95), we standardize 75 and 95 as follows:

z1 = (75 - mean) / standard deviation = (75 - 91.2) / 7.53 ≈ -2.14

z2 = (95 - mean) / standard deviation = (95 - 91.2) / 7.53 ≈ 0.50

Using a standard normal table, we find that P(-2.14 ≤ Z ≤ 0.50) = 0.8244 - 0.0162 = 0.8082. Therefore, P(75 ≤ X ≤ 95) ≈ 0.8082, which is closest to answer (C) 0.8268.

To find P(X < 96), we standardize 96 as follows:

z = (96 - mean) / standard deviation = (96 - 91.2) / 7.53 ≈ 0.64

Using a standard normal table, we find that P(Z < 0.64) = 0.7389. Therefore, P(X < 96) ≈ 0.7389, which is closest to answer (B) 0.6944.

Learn more about binomial distribution here:

https://brainly.com/question/31197941

#SPJ11

An airplane flies horizontally from east to west at 290 mi/hr relative to the air. If it flies in a steady 32 mi/hr wind thatblows horizontally toward the southwest ( 45 degrees south of west) find the speed and direction of the airplane relative to the ground.
The speed of the airplane is approximately ? mi/hr
simplify answer
The direction is ?

Answers

The direction of the airplane relative to the ground is therefore:

θ ≈ arccos(0.994) ≈ 5.22° south of west.

We can use vector addition to solve the problem. Let's assume that the positive x-axis is eastward and the positive y-axis is northward. Then the velocity of the airplane relative to the air is:

v_airplane = 290i

where i is the unit vector in the x-direction. The velocity of the wind is:

v_wind = -32cos(45°)i - 32sin(45°)j

where j is the unit vector in the y-direction. The negative sign indicates that the wind blows toward the southwest. Now we can add the two velocities to get the velocity of the airplane relative to the ground:

v_ground = v_airplane + v_wind

v_ground = 290i - 32cos(45°)i - 32sin(45°)j

v_ground = (290 - 32cos(45°))i - 32sin(45°)j

v_ground = 245.4i - 22.6j

The speed of the airplane relative to the ground is the magnitude of v_ground:

|v_ground| = sqrt((245.4)^2 + (-22.6)^2) ≈ 246.6 mi/hr

The direction of the airplane relative to the ground is given by the angle between v_ground and the positive x-axis:

θ = arctan(-22.6/245.4) ≈ -5.22°

Note that the negative sign indicates that the direction is slightly south of west. Alternatively, we can use the direction cosine ratios to find the direction:

cos(θ) = v_ground_x/|v_ground| = 245.4/246.6 ≈ 0.994

sin(θ) = -v_ground_y/|v_ground| = -22.6/246.6 ≈ -0.091

The direction of the airplane relative to the ground is therefore:

θ ≈ arccos(0.994) ≈ 5.22° south of west.

Learn more about direction here:

https://brainly.com/question/13899230

#SPJ11

Vector a is expressed in magnitude and direction form as a = (V30, 110°). What is the component form a? Enter your answer, rounded to the nearest hundredth, by filling in the boxes.

Answers

The component form of vector a is approximately (-10.26, 25.86).

To find the component form of vector a, we need to use trigonometry.

The magnitude V of the vector a is given by the first component of the magnitude and direction form, which is V = 30.

The angle θ between the vector and the positive x-axis is given by the second component of the magnitude and direction form, which is 110°.

To find the x-component, we use the formula:

x = V cos(θ)

Substituting the values we get:

x = 30 cos(110°) ≈ -10.26

To find the y-component, we use the formula:

y = V sin(θ)

Substituting the values we get:

y = 30 sin(110°) ≈ 25.86.

For similar question on vector.

https://brainly.com/question/30556898

#SPJ11

what are the arithmetic and geometric average returns for a stock with annual returns of 22 percent, 9 percent, −7 percent, and 13 percent?

Answers

The arithmetic average return is found by adding up the returns and dividing by the number of years:

Arithmetic average = (22% + 9% - 7% + 13%) / 4 = 9.25%

To find the geometric average return, we need to use the formula:

Geometric average = (1 + R1) x (1 + R2) x ... x (1 + Rn) ^ (1/n) - 1

where R1, R2, ..., Rn are the annual returns.

So for this stock, the geometric average return is:

Geometric average = [(1 + 0.22) x (1 + 0.09) x (1 - 0.07) x (1 + 0.13)] ^ (1/4) - 1

                  = 0.0868 or 8.68%

Therefore, the arithmetic average return is 9.25% and the geometric average return is 8.68%.

To know more about arithmetic and geometric average  refer here:

https://brainly.com/question/18820506

SPJ11

Realize that questions have many subparts. For this homework please make sure that vour steps are clearly labeled and explained. Also, make sure to tabel everything on your graphs clearly. 1- Answer the following questions. Realize that some of them are True/False, some are multiple choice and some are multiple answers. a. All linear programming problems should have a unique solution, if they can be solved. True/false b. Binding constraints are constraints that hold as an equalify at the optimal solution. True/false c. Nonbinding constraints will always have slack, which is the difference between the two sides of the inequality in the constraint equation. True/false d. When using the graphical solution method to solve linear programming problems, the set of points that satisfy all constraints is called the reejon. i. optimal it. feasible iii. constrained iv. logical e. Consider the following linear peogramming problem: Maximize: 5x1​+5x2​ Subject to: x1​+2x2​≤8x1​+x2​≤6x1​,x2​≥0​ The above linear programming problem i. has onliy one optimal solution. ii. is infeasible iii. is unbounded iv. has more than one optimai solution ODr. Kezban Yagci Sokat BUS2 190 Hint: You do not have to graph to solve the question, If you are able to find out the similarity to one of the class questions, that should help you find the answer very quicklyl. f. Which of the following statements are correct? (Select all apply) i. In some cases, a linear programming problem can be formulated such that the objective can become infinitely large (for a maximization problem) or infinitely small (for a minimization problem). ii. When modeling an optimization problem, the first step is to write the constraints. iii. If a manufacturing process takes 3 hours per unit of x and 5 hours per unit of y and a maximum of 100 hours of manulacturing process time are available, then the mathematical formulation of this constraint is 3x+5y≤100 iv. When we are writing a demand constraint, we use s.

Answers

(a) The given statement "All linear programming problems should have a unique solution, if they can be solved." is false.

(b) The given statement "Binding constraints are constraints that hold as an equality at the optimal solution." is true.

(c) The given statement "Nonbinding constraints will always have slack, which is the difference between the two sides of the inequality in the constraint equation." is true.

a. The statement "All linear programming problems should have a unique solution, if they can be solved." is false because linear programming problems can have multiple optimal solutions or even no solution in some cases.

b. The statement "Binding constraints are constraints that hold as an equality at the optimal solution." is true because binding constraints are constraints that hold as an equality at the optimal solution.

c. The statement "Nonbinding constraints will always have slack, which is the difference between the two sides of the inequality in the constraint equation." is true because Nonbinding constraints will always have slack, which is the difference between the two sides of the inequality in the constraint equation.

d. ii. When using the graphical solution method to solve linear programming problems, the set of points that satisfy all constraints is called the feasible region.

e. iv. The above linear programming problem has more than one optimal solution.

f. The correct statements are:
  i. In some cases, a linear programming problem can be formulated such that the objective can become infinitely large (for a maximization problem) or infinitely small (for a minimization problem).
  iii. If a manufacturing process takes 3 hours per unit of x and 5 hours per unit of y and a maximum of 100 hours of manufacturing process time are available, then the mathematical formulation of this constraint is 3x+5y≤100.

To learn more about linear programming visit : https://brainly.com/question/14309521

#SPJ11

Find the sum of this convergent series by using a well-known function. Identify the function and explain how you obtained the sum, manipulating your expression. ·?

Answers

A convergent series is a series in which the sum of its terms approaches a finite value as the number of terms increases to infinity. There are various methods for determining the sum of a convergent series, including the use of well-known functions such as geometric series, telescoping series, and power series.

For example, the sum of a geometric series with first term a and common ratio r can be found using the formula:

S = a/(1-r)

where S is the sum of the series. This formula can be derived by manipulating the expression for the sum of an infinite geometric series:

S = a + ar + ar^2 + ar^3 + ...

Multiplying both sides by r gives:

rS = ar + ar^2 + ar^3 + ar^4 + ...

Subtracting the second equation from the first gives:

S - rS = a

Solving for S gives the formula above.

In summary, well-known functions can be used to sum convergent series by manipulating the expressions for the series and applying appropriate formulas.

The correct question should be :

Find the sum of this convergent series by using a well-known function. Identify the function and explain how you obtained the sum, manipulating your expression.

∑(-1)ⁿ⁺¹(1/3ⁿn)

To learn more about convergent series visit : https://brainly.com/question/15415793

#SPJ11

A company selling licenses for new e-commerce computer software advertises that firms using this software obtain, on average during the first year, a minimum yield of 10% on their initial investments. A random sample of 10 of these franchises produced the following yields for the first year of operation:


6. 1, 9. 2, 11. 5, 8. 6, 12. 1, 3. 9, 8. 4, 10. 1, 9. 4, 8. 9


Assuming that population yields are normally distributed, test the company's claim with a significance level of 5% (. 05).


I already calculated the sample mean and sample standard deviation, which are 8. 92 and 2. 4257 respectively

Answers

Since the p-value is greater than the significance level of 0.05, we fail to reject the null hypothesis. There is not enough evidence to conclude that the average yield on the initial investment is less than 10%.

To test the company's claim that the average yield on the initial investment is at least 10%, we can use a one-sample t-test. The null hypothesis is that the true mean yield is equal to 10%, while the alternative hypothesis is that it is less than 10%. We will use a significance level of 0.05.

The test statistic for a one-sample t-test is calculated as:

t = (x - μ) / (s / √n)

where x is the sample mean, μ is the hypothesized population mean, s is the sample standard deviation, and n is the sample size.

In this case, the sample mean is 8.92, the hypothesized population mean is 10%, the sample standard deviation is 2.4257, and the sample size is 10. Plugging these values into the formula, we get:

t = (8.92 - 10) / (2.4257 / √10) = -1.699

The degrees of freedom for this test are n - 1 = 9.

Using a t-distribution table or calculator, we can find that the p-value for this test is 0.0647. This means that if the true mean yield is 10%, there is a 6.47% chance of obtaining a sample with a mean yield of 8.92 or lower.

In other words, based on the given sample, we cannot conclude that the company's claim is false. However, we also cannot say with certainty that the claim is true. Further testing with a larger sample size may be necessary to make a more conclusive determination.

Learn more about p-value at: brainly.com/question/30078820

#SPJ11

Mt. Mitchell is 6,683 feet tall. If an object is thrown upward from the top of the mountain at an initial upward velocity of 29 feet per second, its height t seconds after it is thrown is modeled by the function h (t) = − 16t² + 29t + 6683. How long until the object reaches the highest point?

Answers

The time taken by the object to reach the highest point is 0.91 seconds.

The given equation for the function h (t) = − 16t² + 29t + 6683 gives the height of an object that is thrown upward from the top of the mountain at an initial upward velocity of 29 feet per second.
To determine the time taken by the object to reach the highest point, we need to find the vertex of the function h (t). The vertex of a quadratic function is given by (-b/2a, f(-b/2a)) where a, b, c are coefficients of the quadratic equation ax² + bx + c = 0. In the given function h (t) = − 16t² + 29t + 6683, we have a = -16, b = 29, and c = 6683.

Therefore, the time taken by the object to reach the highest point is 0.91 seconds

To know more about quadratic equation, click here

https://brainly.com/question/18958913

#SPJ11

are utilized to make inferences about certain population parameters; a. samplesb. equationsc. statisticsd. metrics

Answers

The term utilized to make inferences about certain population parameters is a) samples.

In statistical analysis, samples are a subset of a larger population that are selected for observation and analysis. By studying the sample, statisticians can make inferences about the larger population from which it was drawn. This allows for predictions to be made about the entire population, based on information gathered from a smaller subset.

Equations and metrics are important in statistical analysis, but they are not used to make inferences about population parameters. Equations are used to model relationships between variables and to test hypotheses, while metrics are used to quantify the properties of data sets.

Statistics, on the other hand, is the branch of mathematics that deals with the collection, analysis, interpretation, presentation, and organization of data. Statistics is used to make sense of data and to draw conclusions about the larger population from which the sample was drawn.

In summary, samples are an important tool for statisticians to make inferences about certain population parameters, and statistics is the field that studies these methods of data analysis.

Therefore, the correct answer is a) samples.

Learn more about data analysis here: https://brainly.com/question/30156066

#SPJ11

Prove that there are no integers, a, b∈Z such that a^(2) = 3b^(2) + 2015.

Answers

Okay, here is the proof that no integers a and b will satisfy the equation a^2 = 3b^2 + 2015:

1) We can rewrite the LHS as a^2 = a * a, where a is an integer. The RHS (3b^2 + 2015) is a multiple of 3 plus 2015. So a * a must also be a multiple of 3 plus 2015 for any integer solutions.

2) The only perfect squares that fit this form are 0, 3, 12, 21, 30, 39, 48, 57, 66, 72, 79, 84, 87, 90, 99, ... (multiples of 3 plus 2015). None of these are equal to 3b^2 for any integer b.

3) Let's suppose a = 3k for some integer k. Then 9k^2 = 3b^2 + 2015. But 3 does not divide 9k^2 except when k = 0, and 0^2 does not equal 3b^2 + 2015 for any b. Contradiction.

4) Let's suppose a = 3k+1 for some integer k. Then (3k+1)^2 = 3b^2 + 2015. But (3k+1)^2 is always 1 more than a multiple of 3, while 3b^2 + 2015 is a multiple of 3 plus 2015. Contradiction.

5) Let's suppose a = 3k+2 for some integer k. Then (3k+2)^2 = 3b^2 + 2015. But (3k+2)^2 is always 4 more than a multiple of 3, while 3b^2 + 2015 is a multiple of 3 plus 2015. Contradiction.

In all cases, we reach a contradiction. Therefore, there are no integer solutions for a and b that satisfy the original equation a^2 = 3b^2 + 2015.

Let me know if any part of this proof is unclear! I can provide more details or examples if needed.

If the 100th term of an arithmetic sequence is 389, and its common difference is 4, then:

Answers

If the 100th term of an arithmetic sequence is 389, and its common difference is 4, then the first term of the arithmetic sequence is -7.

For the first term of the arithmetic sequence with the 100th term being 389 and a common difference of 4, you can use the formula for the nth term of an arithmetic sequence:

An = A1 + (n - 1)d

Where An is the nth term (in this case, the 100th term), A1 is the first term, n is the number of terms (100), and d is the common difference (4).

We know that An = 389 and n = 100, so we can plug these values into the formula:

389 = A1 + (100 - 1)4

Now, solve for A1:

389 = A1 + 396

Subtract 396 from both sides:

A1 = -7

So, the first term of the arithmetic sequence is -7.

To know more about arithmetic sequence refer here :

https://brainly.com/question/18289800#

#SPJ11

Viggo is 9 years old and his sister Wren is 6 years old. €75 is divided between them in the ratio of their ages. How much money does Viggo get ?

Answers

Given that Viggo is 9 years old and his sister Wren is 6 years old. And €75 is divided between them in the ratio of their ages. We need to find out how much money Viggo will get.

To find the amount of money Viggo gets, we need to understand the concept of ratio. Ratio is the quantitative relation between two numbers showing the number of times one value contains or is contained within the other. To find the amount of money Viggo gets, we need to find out the ratio of his age to the total age of both Viggo and Wren.

Age of Viggo = 9 years Age of Wren = 6 years Total age of both = 9 + 6 = 15So, the ratio of Viggo's age to the total age of both is 9 : 15 or 3 : 5.Now, we can divide the €75 in the ratio 3 : 5. This is done by dividing the total amount into 3 + 5 = 8 parts. Then, the amount that Viggo gets can be found by multiplying his share (3 parts) with the total amount (€75) and dividing by the total number of parts (8).Amount received by Viggo = (3/8) × €75= €28.The amount of money that Viggo will get is €28.

Know more about quantitative relation here:

https://brainly.com/question/29844749

#SPJ11

Select the correct answer from each drop-down menu.


Juan is clearing land in the shape of a circle to plant a new tree. The diameter of the space he needs to clear is 52 inches. By midday, he has


cleared a sector of the land cut off by a central angle of 140°. What is the arc length and the area of land he has cleared midday?


The land Juan has cleared by midday has an arc length of about


inches and an area of about


square inches



first box options: 64, 127, 20, 826


second box options: 3,304, 826, 2,124, 64

Answers

The land Juan has cleared by midday has an arc length of about 32 inches and an area of about 2,124 square inches.

The land Juan has cleared midday has an arc length of approximately 127 inches and an area of about 1,282.87 square inches.

The length of a curved line segment connecting two points on a circle's circumference is known as the arc length. Since the circumference of a circle is always the same for any given diameter, the ratio of the arc length to the circumference is equivalent to the ratio of the central angle to 360 degrees.

Therefore, the arc length formula can be derived from this:Arc Length = θ / 360 × 2πr

Where,θ is the central angle in radiansr is the radius of the circleUsing the above formula, the arc length is:Arc Length = 140° / 360 × 2π(52/2)Arc Length = 0.39 × 81.68Arc Length ≈ 31.95 ≈ 32 inches

The area of a sector is calculated as a fraction of the circle's total area. As a result, the formula for the area of a sector is derived as follows:Area of sector = θ / 360 × πr²

Where,θ is the central angle in radiansr is the radius of the circleUsing the above formula, the area of land cleared by Juan midday is:Area of sector = 140° / 360 × π(52/2)²

Area of sector = 0.39 × π × 26²Area of sector ≈ 1,282.87 ≈ 2,124 in²

Hence, the land Juan has cleared by midday has an arc length of about 32 inches and an area of about 2,124 square inches.

Know more about arc length here,

https://brainly.com/question/31762064

#SPJ11

Of t = 2 what is d what is the independent variable and the dependent variable in this problem

Answers

In the given problem, the independent variable is t and the dependent variable is d. The relationship between the two variables can be described by the following formula: d = 5t + 7. When t = 2, we can find the corresponding value of d by substituting t = 2 in the formula: d = 5(2) + 7 = 17.

Therefore, when t = 2, the value of d is 17. Here is the detailed explanation of independent and dependent variables: The independent variable is the variable that is being changed or manipulated in an experiment. In other words, it is the variable that is presumed to be the cause of the change in the dependent variable.

It is usually plotted on the x-axis of a graph. The dependent variable is the variable that is being observed or measured in an experiment. It is presumed to be the effect of the independent variable.

It is usually plotted on the y-axis of a graph. In the given problem, t is the independent variable because it is being varied or manipulated, and d is the dependent variable because it is being observed or measured and its value depends on the value of t.

To know more about Variable  visit :

https://brainly.com/question/29583350

#SPJ11

or kindergarten children, their heights are approximately normally distributed about a mean of 39 inches and a standard deviation of 2 inches. If 32 kindergarten children are randomly selected, find the probability that their mean height is between 38.5 and 40 inches.

Answers

The probability that height of 32 children is 0.7011 or 70.11%.

How to find the probability that height is between 38.5 and 40 inches?

The sample mean of a large number of independent and identically distributed random variables follows a normal distribution with mean μ and standard deviation [tex]\sigma/\sqrt(n)[/tex] due to the Central Limit Theorem.

Where μ is the population mean, σ is the population standard deviation, and n is the sample size.

In this case, we are given that the heights of kindergarten children are approximately normally distributed with a mean of 39 inches and a standard deviation of 2 inches.

Since the sample size is 32, we can use the CLT to find the probability that their mean height is between 38.5 and 40 inches.

First, we need to standardize the sample mean using the formula:

[tex]z = (x - \mu) / (\sigma/ \sqrt(n))[/tex]

where x is the sample mean, μ is the population mean, σ is the population standard deviation, and n is the sample size.

Substituting the given values, we get:

[tex]z1 = (38.5 - 39) / (2 / \sqrt(32)) = -1.06[/tex]

[tex]z2 = (40 - 39) / (2 / \sqrt(32)) = 1.06[/tex]

Next, we need to find the probability that the sample mean falls between z1 and z2. We can use a standard normal distribution table or a calculator to find this probability.

Using a standard normal distribution table or a calculator, we find that the probability that a standard normal random variable falls between -1.06 and 1.06 is approximately 0.7011.

Therefore, the probability that the mean height of 32 kindergarten children is between 38.5 and 40 inches is approximately 0.7011 or 70.11%.

Learn more about probability

brainly.com/question/30034780

#SPJ11

find symmetric equations for the line of intersection of the planes. z = 4x − y − 13, z = 6x 3y − 15

Answers

The symmetric equations for the line of intersection of the given planes are: x - t = 0, y - 2s = 0 and z - 1 = 0

To find the symmetric equations for the line of intersection of the planes, we can start by setting the two given equations equal to each other:

4x - y - 13 = 6x + 3y - 15

Next, we can rearrange the equation to get all variables on one side:

2x + 4y - 2 = 0

Now, let's introduce two parameters, t and s, to represent the variables x and y, respectively. We can express x and y in terms of t and s:

x = t

y = s

Substituting these values into the equation 2x + 4y - 2 = 0, we get:

2t + 4s - 2 = 0

Dividing the equation by 2, we have:

t + 2s - 1 = 0

Now, we can express the equation in symmetric form:

x - t = 0

y - 2s = 0

z - 1 = 0

Therefore, the symmetric equations for the line of intersection of the given planes are:

x - t = 0

y - 2s = 0

z - 1 = 0

To know more about symmetric equations refer to-

https://brainly.com/question/27039363

#SPJ11

Suppose T and Z are random variables How do I solve this?a) if P(t>2.17)=0.04 and P(t<-2.17)=0.04 obtain P(-2.17<=T<=2.17)b) If P (-1.18 <=Z<=1.18)=0.76 and also P(Z>1.18)=P(Z<-1.18) Find P(Z>1.18)

Answers

the standard normal distribution (also called the z-distribution) is a normal distribution with a mean of zero and a standard deviation of one.

a) We know that the t-distribution is symmetric, so P(t > 2.17) = P(t < -2.17). Therefore, we can use the complement rule to find P(-2.17 =< T =< 2.17):

P(-2.17 =< T =<2.17) = 1 - P(T < -2.17) - P(T > 2.17)

= 1 - 0.04 - 0.04

= 0.92

Therefore, P(-2.17 =<T =<2.17) is 0.92.

b) We know that the standard normal distribution is symmetric, so P(Z > 1.18) = P(Z < -1.18). Let's call this common probability value p:

P(Z > 1.18) = P(Z < -1.18) = p

We also know that P(-1.18 =< Z =< 1.18) = 0.76. We can use the complement rule to find p:

p = 1 - P(-1.18 =< Z =< 1.18)

= 1 - 0.76

= 0.24

Therefore, P(Z > 1.18) is also 0.24.

To learn more about deviation visit:

brainly.com/question/23907081

#SPJ11

Jamal had $2500, some of which he deposited in a mutual fund account paying 8%. The rest he deposited in a money market account paying 2%. How much did he deposit in each account if the total annual interest was $152?

Answers

Therefore, the amount deposited in the mutual fund account is $1700 and the amount deposited in the money market account is $800.

Let the amount deposited in the mutual fund account be x.

Therefore, the amount deposited in the money market account will be $2500 - x.

The interest earned on the amount deposited in the mutual fund account is 8%.

Therefore, the interest earned on the amount deposited in the mutual fund account will be 0.08x.

The interest earned on the amount deposited in the money market account is 2%.

Therefore, the interest earned on the amount deposited in the money market account will be

0.02($2500 - x) = 50 - 0.02x.

The total annual interest was $152.Thus,0.08x + 50 - 0.02x = 152

Simplify the above expression to get,0.06x = 102x = 1700

Therefore, Jamal deposited $1700 in the mutual fund account. And, $800 ($2500 - $1700) in the money market account.

You can verify the above solution as follows:$1700 × 0.08 + $800 × 0.02= $136 + $16= $152

To know more about interest visit

https://brainly.com/question/30393144

#SPJ11

The average math SAT score is 518 with a standard deviation of 118. A particular high school claims that its students have unusually high math SAT scores. A random sample of 60 students from this school was selected, and the mean math SAT score was 562. Is the high school justified in its claim? Explain
answers is ( choose yes/or no) , because the z score ( which is? ) is ( choose, usual or not usual) since it ( choose, does not lie ,or lies) within the range of a usual event , namely within ( choose 1, 2 or 3 standard deviations) of the mean of the sample means.
round to two decimal places as needed

Answers

The z-score is greater than 2 (the cutoff for a usual event at the 95% confidence level)

Why z-score is greater?

The answer is "Yes" because the z-score is 2.98, which is not a usual value since it lies outside the range of usual events, namely outside 2 standard deviations of the mean of the sample means.

To calculate the z-score, we use the formula:

z = (x - μ) / (σ / √(n))

where x is the sample mean, μ is the population mean, σ is the population standard deviation, and n is the sample size.

Plugging in the given values, we get:

z = (562 - 518) / (118 / √(60)) = 2.98

Since the z-score is greater than 2 (the cutoff for a usual event at the 95% confidence level), we can conclude that the high school's claim is justified.

Learn more about z-score

brainly.com/question/31613365

#SPJ11

Marcel earns $13. 40/h and works 40 hours a week. What is Marcel’s gross monthly income? $1072. 00 $1161. 33 $2144. 00 $2322. 67.

Answers

To calculate Marcel's gross monthly income, we need to multiply his hourly wage by the number of hours he works per week and then multiply that by the average number of weeks in a month.

Marcel earns $13.40 per hour and works 40 hours per week.

To calculate his weekly income, we multiply these two values:

Weekly income = $13.40/hour * 40 hours/week = $536.00/week

Now, let's calculate the average number of weeks in a month. In general, there are about 4.33 weeks in a month, taking into account the variation in the number of days across different months.

Average number of weeks in a month = 52 weeks/year / 12 months/year = 4.33 weeks/month

Finally, to find Marcel's gross monthly income, we multiply his weekly income by the average number of weeks in a month:

Gross monthly income = $536.00/week * 4.33 weeks/month = $2321.88/month (rounded to the nearest cent)

Therefore, Marcel's gross monthly income is approximately $2321.88.

However, none of the given options match this exact amount. The closest option is $2322.67, so we can select that as the closest approximation.

To know more about Marcel's gross monthly income visit:

https://brainly.com/question/25792557

#SPJ11

Other Questions
WILL MAKE BRAINLIEST!! Angles a and b are vertical angles. If m A client who has liver damage is receiving lithium for treatment of bipolar disorder. The nurse understands that which of the following may occur when the client is receiving lithium In contrast to a Level III trauma center, a Level I trauma center must As mean arterial pressure increases, the ________, informing the medulla oblongata that blood pressure has indeed increased. A set of strategies (one for each player) in which each player's strategy is the best option for that player, given the chosen strategy of the player's opponents Write the following sentences in passive form(iii) The Principal gave me the prize(iv) The fish took the baitUnderline the finite verbs in the following sentences(v) He travels on Monday(vi) Tola killed a snakeCorrect the following sentences(vii) I and my brother attend the same school(viii) My senior brother is sleepingUnderline the preposition in the following:(ix) There is much to discover under the sea bed.(x) The accused looked straight into the Judge's eyes The pictures represent three different states of matter.Which order of pictures places molecules with themost amount of motion to the least amount of motion?OX-Y-ZOZ Y-XOY-Z-XOY X-Z factor 18x^(2)+39x-15 Evaluate the following expression when y=2.9y8y+2 When hydrogen is fused into helium, energy is released from Choose one: A. the increase in pressure. B. the decrease in the gravitational field. C. conversion of mass to energy. D. gravitational collapse. Treasury stock represents ______. (Check all that apply.) Multiple select question. stock issued in exchange for treasury bills a contra-equity account the amount paid for stock reacquired and currently held in treasury the amount paid to acquire US treasury stock What narrative point of view does le sueur use? how does the point of view qualify this text as subjective, rather than an objective report? A ____________ is a planar, six-membered ring used to represent the cyclic form of glucose and other sugars. In the late 1930s, the Allied powers seemed hesitant to engage in any type of fight against Hitler. What fact would support the idea that Hitler was still worried about resistance from France?1. He was concerned about a French-Polish alliance, so he signed a non-aggression pact with Poland.2. He secretly met with the ruler of France to create a non-aggression pact in exchange for British lands. The United States Supreme Court uses three tests to determine differential treatment. What are these three tests, what characteristics do the look at for differential treatment, and provide an example of that characteristic.Test one: Test two: Test three: Reread the following lines from the two poems. Then, answer the multiple-choice questions that follow.From The Love Song of J. Alfred Prufrock by T. S. Eliot:Let us go then, you and I,When the evening is spread out against the skyLike a patient etherized upon a table;Let us go, through certain half-deserted streets,The muttering retreatsOf restless nights in one-night cheap hotelsAnd sawdust restaurants with oyster shells:Streets that follow like a tedious argumentOf insidious intentTo lead you to an overwhelming question ...Oh, do not ask, "What is it?"Let us go and make our visit.The Great Figure by William Carlos Williams:Among the rainand lightsI saw the figure 5in goldon a redfiretruckmovingwith weight and urgencytenseunheededto gong clangssiren howlsand wheels rumblingthrough the dark city.1. What theme, common to the literary period of Modernism, do you see in these lines from both poems?A. The chaos of modern life can sometimes make one feel isolated and overwhelmed.B. One should be fearful of the technology and industrialization at the center of modern life.C. Those who are tasked with protecting others grow accustomed to chaotic experiences.D. The world seems forever dark and cold to those who are too afraid to love.2. Which statement best compares the use of sentence structure in both poems?A. Both poems reject traditional punctuation to allow readers to follow the flow of ideas.B. Both poems experiment with sentence structure to show the positive outlook of the speaker.C. Both poems use a combination of very short and very long sentences to highlight the main ideas.D. Both poems use long and fragmented sentence structures to show new thoughts entering the text. Most operating decisions of management focus on a narrow range of activity called the ______ of production. a.optimal level b.relevant range c.tactical operating level d.strategic level Which of the following sets of numbers could not represent the three sides of a triangle? A government imposes a $10 per-unit tax in a competitive market. Afterward, the seller's after-tax price falls from the original equilibrium price of $20 to $18. Based on this, which of the following is true Which statement about energy usage is supported by the passage?A Developed and developing countries use less energy and create less emissions than least developed countries.B Developed and developing countries use more energy and create more emissions than least developed countries.C All countries, regardless of development, use different amounts of energy but create the same amount of emissions.D All countries, regardless of development, use the same amount of energy but create different amounts of emissions.