(a) Calculate the magnitude of the angular momentum of the earth in a circular orbit around the sun. Is it reasonable to model it as a particle? (b) Calculate the magnitude of the angular momentum of the earth due to its rotation around an axis through the north and south poles, modeling it as a uniform sphere. Please show your work.

The water flow takes 1.06 s to reach the house.

Water strikes 0.87 m above the window when the firefighter holds the hose at a [tex]53^o[/tex] angle from horizontal.

The magnitude of velocity when water hits the house is 7.52 m/s.

The minimum speed for water to enter into the window is[tex]v_0 = d / (v_0cos(\theta)) \times\sqrt{(8.4-2dtan\theta)/g}[/tex].

The question can be solved by applying the concept of projectile motion. When an object is projected into the air, it follows a curved path under the influence of gravity. The path followed by a projectile is called a parabolic path.

To solve this problem, we can break it down into a few parts.

First, let's find the time it takes for the water to reach the house:

We can use the horizontal distance between the firefighter and the house, which is 8 m, and the initial horizontal velocity of the water, which can be found using the initial speed and launch angle:

[tex]v_x = v_0 cos(53^\circ)[/tex]

[tex]v_x = 12.5 \ m/s \times cos(53^\circ)[/tex]

[tex]v_x = 7.5 \ m/s[/tex]

The time it takes for the water to travel the horizontal distance of 8 m can be found using the formula:

[tex]time = distance/velocity[/tex]

[tex]time = 8 \ m / 7.5 \ m/s[/tex]

[tex]time = 1.06\ s[/tex]

So it takes 1.06 seconds for the water to reach the house.

Next, let's find the height above the window that the water reaches:

We can use the vertical distance between the firefighter and the window, which is (6 - 1.8) m, and the initial vertical velocity of the water, which can be found using the initial speed and launch angle:

[tex]v_y = v_0 sin(53^\circ)[/tex]

[tex]v_y = 12.5 \ m/s \times sin(53^\circ)[/tex]

[tex]v_y = 9.98 \ m/s[/tex]

The time it takes for the water to reach the house is 1.06 s, so we can use this time and the initial vertical velocity to find the height above the window that the water reaches:

[tex]y = v_yt - 0.5gt^2[/tex]

[tex]y = 9.98 \ m/s \times 1.06 s - 0.5 \times 9.8 \ m/s^2 \times (1.06 \ s)^2[/tex]

[tex]y = 5.07\ m[/tex]

Since the firefighter is holding the fire hose 1.8 m above the ground, the total height reached by the water is

h = 1.8 + 5.07 = 6.87 m

Height above the window = 6.87 - 6 = 0.87 m

So the water reaches a height of 0.87 m above the window.

Next, let's find the magnitude of the velocity of the water when it strikes the house:

Vertical velocity of water when it stricks the house at t = 1.06 s.

[tex]v_{y(final)} = 9.98 - 9.81\times 1.06[/tex]

[tex]v_{y(final)} = 0.588 \ m/s[/tex] (downwards)

We can use the horizontal and vertical components of the velocity to find the total velocity using the Pythagorean theorem:

[tex]v = \sqrt{vx^2 + vy^2}[/tex]

[tex]v = \sqrt{(7.5\ m/s)^2 + (0.588\ m/s)^2}[/tex]

v = 7.52 m/s

So the magnitude of the velocity of the water when it strikes the house is 7.52 m/s.

Finally, let's find the minimum angle and speed of the flow in order to get water right into the window:

For the water to reach the window, its vertical displacement must be equal to the vertical distance between the firefighter and the window, which is 4.2 m. We can use this information to find the launch angle and speed using the equations of motion:

[tex]y = v_0 sin(\theta) t - 0.5 g t^2[/tex]

[tex]4.2 m = v_0 sin(\theta) t - 0.5 g t^2[/tex] ....(1)

[tex]v_x = v_0 cos(\theta)[/tex]

[tex]t = d / v_x[/tex]

[tex]t = {d}/{v_0 cos\theta}[/tex] .....(2)

Substituting the second equation into the first equation and solving for [tex]v_0[/tex] and θ, we get:

[tex]v_0 = d / (v_0cos(\theta) t)[/tex]

[tex]4.2 m = (\frac{d}{(cos(\theta) t)}) \times sin(\theta) t - 0.5 g t^2[/tex]

Solving for t and substituting into the equation for [tex]v_0[/tex], we get:

[tex]t = \sqrt{(8.4-2dtan\theta)/g}[/tex]

[tex]v_0 = d / (v_0cos(\theta) \times\sqrt{(8.4-2dtan\theta)/g)}[/tex]

Substituting the values given in the problem (d = 8 m, [tex]g = 9.8 m/s^2[/tex]), we can solve for θ and [tex]v_0[/tex]

Learn more about projectile motion:

https://brainly.com/question/24216590

#SPJ11

The speed of the sports car at impact when kinetic friction between tires and road is 0.80 is 15.55 m/s.

It is given that Mass of sports car, ms = 910 kg, Mass of SUV, mSUV = 2100 kg, and Initial velocity of sports car, us = ?, Final velocity of sports car, v = 0, Initial velocity of SUV, uSUV = 0, Final velocity of SUV, vSUV = 0, and Coefficient of kinetic friction, μk = 0.80. Distance covered before stopping, s = 2.5 m.

We know that the total momentum of the system remains conserved, we can write:

ms * us + mSUV * uSUV = (ms + mSUV) * v

Thus,

ms * us = (ms + mSUV) * v

The speed of the sports car at impact when kinetic friction between tires and road is 0.80 is 15.55 m/s.

It is given that Mass of sports car, ms = 910 kg, Mass of SUV, mSUV = 2100 kg, and Initial velocity of sports car, us = ?, Final velocity of sports car, v = 0, Initial velocity of SUV, uSUV = 0, Final velocity of SUV, vSUV = 0, and Coefficient of kinetic friction, μk = 0.80. Distance covered before stopping, s = 2.5 m.

We know that the total momentum of the system remains conserved, we can write:

ms * us + mSUV * uSUV = (ms + mSUV) * v

Thus,

ms * us = (ms + mSUV) * v

Since the two cars skid together, the frictional force provides the reduction to the motion of the cars. The reduction force F = μk * N where N is the normal force acting on the cars, N = (ms + mSUV) * g where g is the acceleration due to gravity, g = 9.8 m/s².

We have to find the speed of the sports car at impact i.e. us. So, using the equations of motion with constant acceleration, we can write:

us² - 2 * μk * (ms + mSUV) * g * s / (ms + mSUV) = v²

us² = 2 * μk * (ms + mSUV) * g * s / ms

us = sqrt [2 * 0.80 * (910 + 2100) * 9.8 * 2.5 / 910]

us = 15.55 m/s

Therefore, the speed of the sports car at impact is 15.55 m/s.

Learn more about Kinetic friction:

https://brainly.com/question/20241845

#SPJ11

The magnetic force exerted by the field on the charge is 0.5qvB.

F = qvBsin(θ)

where;

F = qvBsin(30)

F = 0.5qvB

Magnetic force is a fundamental force that arises due to the motion of electric charges. It is the force that acts between two magnetic poles or between a magnetic pole and a moving charged particle. Magnetic force is a vector quantity and is described in terms of its direction, magnitude, and point of application.

The force between two magnetic poles is governed by the inverse square law, which means that the force decreases as the distance between the poles increases. The direction of the magnetic force is perpendicular to the direction of motion of the charged particle and to the direction of the magnetic field in which it moves. The magnitude of the magnetic force is proportional to the charge of the particle, its velocity, and the strength of the magnetic field.

To learn more about Magnetic force visit here:

brainly.com/question/3160109

#SPJ4

The overall resistance of your room's electric circuit will decrease when you turn on an additional 100-W bulb.  An ideal ammeter would have zero resistance is because it is designed to measure current. An ideal voltmeter would have infinite resistance because it is designed to measure voltage.

When you turn on an additional 100-W bulb, the overall resistance of your room's electric circuit decreases because adding more bulbs increases the total current flowing through the circuit. The reason an ideal ammeter would have zero resistance is because it is designed to measure current, and any resistance in the ammeter itself would interfere with the measurement. An ideal voltmeter, on the other hand, would have infinite resistance because it is designed to measure voltage, and having a high resistance would prevent any current from flowing through the voltmeter and interfering with the measurement.

Both of these ideal instruments are hypothetical, but they help us understand the principles behind electrical measurements. For instance, a real ammeter has a small but measurable resistance, which means that some current is diverted from the circuit when it is connected, but this can be minimized by using a low-resistance shunt. Similarly, a real voltmeter has a high resistance, but not infinite, which means that some current will flow through it, but this can be minimized by using a high-resistance input circuit.

Learn more about Resistance:

https://brainly.com/question/24119414

#SPJ11

The angular acceleration of the rod immediately after it is released from its initial position of 39 degrees from the vertical is - 0.022 rad/s²

Angular acceleration of the rod:We will use the law of conservation of energy. When the rod is released from the initial position, the gravitational potential energy will convert to kinetic energy of the rod and the sphere.Let the angular acceleration of the rod be α,The gravitational potential energy of the system when the rod is at the initial position is given by,PE = mgh where, m = mass of the sphere + mass of the rod = 4 kg,L = length of the rod = 30 mgr = radius of the sphere = 3.3 mθ = angle from the vertical = 39 degrees,h = vertical height = LcosθPE = mgLcosθ= 4 × 9.8 × 30 × cos39°PE = 1058.33 J

Now, when the rod falls, it will rotate about the pivot point. The kinetic energy of the system will be given by,K.E = 1/2 (Irod + Isphere) ω²where, ω = angular velocity of the rod + sphere after falling.The moment of inertia of the system about the pivot point is given by,I = Irod + Isphere. We can use the parallel axis theorem to calculate the moment of inertia of the sphere,I sphere = 2/5 mr² + mr² = 7/5 mr²So,I = Irod + Isphere= 3/12 mL² + 7/5 mr²= 3/12 × 4 × 30² + 7/5 × 4 × 3.3²= 126.48 kg.m²Now,K.E = 1/2 (Irod + Isphere) ω²= 1/2 I ω²

The initial velocity of the rod is 0, so the initial kinetic energy of the system is 0.The final velocity of the rod + sphere can be found using the conservation of energy equation,PE = K.EPE = K.E1/2 mv² = mgh1/2 I ω² = mghω² = 2mgh/Iω = sqrt (2mgh/I)Substitute the given values in the above equation,ω = sqrt (2 × 4 × 9.8 × 30 × cos39° / 126.48)ω = 1.479 rad/s

Now, we can use the torque equation to find the angular acceleration of the rod.The gravitational force acting on the sphere is mg.The torque due to the gravitational force about the pivot point is,τ = mgh sinθ= 4 × 9.8 × 30 × sin39°= 753.84 N.m The torque due to the weight of the rod is,T = Irod α= 3/12 mL² α= 3/12 × 4 × 30² × α= 90α N.m Using Newton's second law of motion,Net torque = Iαα = (mgh sinθ - T) / I= (mgh sinθ - Irod α) / I= (mgh sinθ) / I - (3/12 mL²) α= (4 × 9.8 × 30 × sin39°) / 126.48 - (3/12 × 4 × 30²) α= 1.98 - 90 αα = - 0.022 rad/s² (Negative sign indicates that the angular acceleration is in the opposite direction to the initial angular velocity of the rod)Therefore, the angular acceleration of the rod immediately after it is released from its initial position of 39 degrees from the vertical is - 0.022 rad/s².Answer: - 0.022 rad/s².

More on angular acceleration: https://brainly.com/question/30237820

#SPJ11

a. The ammeter reading should be I = V/R = 27V/9ohm = 3A.

b. The voltmeter reading should be 27V, since it is connected in parallel with the battery and measures the voltage across it.

c. The power delivered to the resistor can be calculated using P = VI = (I^2)*R = (3A)^2 * 9ohm = 27W.

d. The energy delivered to the resistor per hour can be calculated using E = Pt = 27W * 1 hour = 27 Wh.

What is an ammeter?

An ammeter is a measuring instrument used to measure electric current flowing through a circuit. It is typically connected in series with the circuit so that all the current flowing in the circuit passes through the ammeter. Ammeters can be analog or digital, and they are designed to measure different ranges of current. They are an essential tool for diagnosing and troubleshooting electrical problems, and they are commonly used in industrial, commercial, and residential applications.

What is a voltmeter?

A voltmeter is a measuring instrument used to measure the electric potential difference (voltage) between two points in an electrical circuit. It is typically connected in parallel with the circuit component or circuit section whose voltage is to be measured. When a voltage is present in the circuit, the voltmeter displays the measured value in volts, which can help to determine the performance or condition of the circuit.

To know more about ammeter, visit:

https://brainly.com/question/30849022

#SPJ1

a. The ammeter reading should be I = V/R = 27V/9ohm = 3A.

b. The voltmeter reading should be 27V, since it is connected in parallel with the battery and measures the voltage across it.

c. The power delivered to the resistor can be calculated using P = VI = (I^2)*R = (3A)^2 * 9ohm = 27W.

d. The energy delivered to the resistor per hour can be calculated using E = Pt = 27W * 1 hour = 27 Wh.

An ammeter is a measuring device used to determine the amount of electric current passing through a circuit. It is usually wired in series with the circuit so that all current passing through it goes through the ammeter. Ammeters can be analogue or digital, and they are used to detect various current levels. They are an indispensable instrument for diagnosing and troubleshooting electrical issues, and they are widely used in industrial, business, and domestic settings.

A voltmeter is a measuring device used to determine the difference in electric potential (voltage) between two locations in an electrical circuit. It is usually linked in parallel with the circuit component or portion whose voltage is to be measured. When a voltage is present in the circuit, the voltmeter shows the measured value in volts, which can aid in determining the circuit's performance or state.

To know more about ammeter, visit:

brainly.com/question/30849022

#SPJ1

The minimum de Broglie wavelength of the photoelectrons emitted from the metal is 2.19 x 10⁻⁹ m.

The energy of the incident photon can be calculated using the equation:

E = hc/λ

where h is the Planck constant, c is the speed of light, and λ is the wavelength of the light.

E = (6.626 x 10⁻³⁴J.s)(3.00 x 10⁸ m/s) / (105 x 10⁻⁹m)

E = 1.89 x 10⁻¹⁸ J

The work function of the metal is given as 5.00 eV, which can be converted to joules:

5.00 eV x 1.60 x 10⁻¹⁹ J/eV

= 8.00 x 10⁻¹⁹ J

The minimum energy required to eject an electron from the metal is the work function, so the kinetic energy of the emitted photoelectron can be calculated as:

K.E. = E - Work function

K.E. = 1.89 x 10⁻¹⁸ J - 8.00 x 10⁻¹⁹ J

K.E. = 1.09 x 10⁻¹⁸ J

The de Broglie wavelength of the photoelectron can be calculated using the equation:

λ = h/p

where h is the Planck constant and p is the momentum of the particle.

The momentum of the photoelectron can be calculated as:

p = √(2mK.E.)

where m is the mass of the electron.

p = √(2 x 9.11 x 10⁻³¹ kg x 1.09 x 10⁻¹⁸ J)

p = 3.03 x 10⁻²⁵ kg.m/s

Now, we can calculate the de Broglie wavelength of the photoelectron:

λ = h/p

λ = 6.626 x 10⁻³⁴ J.s / 3.03 x 10⁻²⁵ kg.m/s

λ = 2.19 x 10⁻⁹ m

Therefore, the minimum de Broglie wavelength of the photoelectrons emitted from the metal is 2.19 x 10⁻⁹ m.

Learn more about de Broglie wavelength here:

https://brainly.com/question/30404168

#SPJ11

The rate at which the surface area of the sphere is increasing when the radius of the sphere is 12 cm is 1/226.5 cm/s.

The volume of a sphere is increasing at the rate of 8 cm³/s.

Radius of the sphere is 12 cm.

So, we need to find the rate at which its surface area is increasing.

Let, V be the volume of the sphere and r be the radius of the sphere. The volume of a sphere of radius r is given by:

V = (4/3)πr³

Differentiating with respect to time t, we get:

dV/dt = 4πr²(dr/dt) ...(1)

Also, the surface area of the sphere is given by:

A = 4πr²

Differentiating with respect to time t, we get:

dA/dt = 8πr(dr/dt) ...(2)

From equations (1) and (2), we can write:

dr/dt = dV/dt ÷ 4πr²

dr/dt = 8 / (4π × 12²)

dr/dt = 8 / 1808

dr/dt = 1 / 226.5 cm/s

Therefore, the rate at which the surface area of the sphere is increasing when the radius of the sphere is 12 cm is 1/226.5 cm/s.

Learn more about Surface area here:

https://brainly.com/question/29101132

#SPJ11

The force of static friction between the ground and the rock is equal to the coefficient of static friction multiplied by the normal force. Since the rock is of weight 500 N, the normal force is 500 N. Therefore, the force of static friction is 500 N × 0.50 = 250 N.

The rock is at rest on the ground. The rock's weight is 500 N. The coefficient of static friction between the ground and the rock is 0.50. If somebody pushes the rock to the right with an applied force of 100 N.

In the present situation, we need to determine the force of static friction between the ground and the rock. The rock is not moving, and therefore the maximum static friction force is equal to the applied force of 100 N. To find the normal force (FN), we'll have to start with calculating the gravitational force acting on the rock.

The force of gravity is given as:

Fg = mg

where, m = mass of the object, g = acceleration due to gravity

The weight of the rock is given as 500 N. We can find the mass of the rock by dividing the weight by the acceleration due to gravity. Therefore,

m = Fg/g = 500 N / 9.81 m/s² = 50.9 kg

Now, we can compute the normal force (FN) exerted by the ground on the rock as:

FN = mg = 50.9 kg × 9.81 m/s² = 500 N

Therefore, FS ≤ μs FN= 0.50 × 500 N = 250 N

The maximum static friction force that can be exerted by the ground is 250 N. Therefore, the force of static friction between the ground and the rock is 100 N.

Read more about friction here:

https://brainly.com/question/24338873

#SPJ11

Room heater. The electric current's magnetic action is not the foundation of the space heater. Devices that depend on the magnetic effect of electric current to work include the magnetic crane, , and loudspeaker.

The magnetic crane creates a magnetic field that can lift large things using an electromagnet. The magnetic field produced by the electric bell's usage of an electromagnet forces a metal clapper to strike a bell, emitting a ringing sound. An electromagnet in the loudspeaker causes a diaphragm to vibrate, creating sound waves that can be perceived by the human ear. In contrast, the usual mechanism of a room heater is the use of a resistor or heating element to transform electrical energy into heat energy. After that, the heat is radiated or convected.

learn more about  electric current here:

https://brainly.com/question/2264542

#SPJ4

The reflectivity of an asteroid, also known as its albedo, can be determined by measuring the amount of light it reflects at different wavelengths and comparing it to a standard calibration source.

Astronomers use telescopes and spectrographs to measure the amount of light reflected by an asteroid at different wavelengths, from ultraviolet to visible to infrared. They compare these measurements to a standard calibration source to determine the asteroid's albedo, which is a measure of its reflectivity. The albedo can provide valuable information about the asteroid's composition, such as whether it is rocky or metallic, and can also help astronomers estimate its size and shape. Understanding the reflectivity of asteroids is important for studying their properties and behavior, as well as for assessing the potential risks and opportunities they may pose for spacecraft exploration or impact events.

To know more about asteroid, here

brainly.com/question/31181999

#SPJ4

Polarized glasses reduce the glare reflected from the ocean by filtering out horizontally polarized light, allowing only vertically polarized light to pass through. This eliminates the glare, leaving a much clearer view of the ocean.

Polarized lenses are specially designed to filter out certain wavelengths of light, allowing only vertically polarized light to pass through. This eliminates glare, as glare is made up of horizontally polarized light.

To understand this better, we can look at how light reflects off the ocean. When light hits the surface of the ocean, it is reflected in all directions. This includes horizontally polarized light, which is what causes glare.

However, when light passes through polarized lenses, only vertically polarized light is allowed to pass through. This eliminates the horizontally polarized light, thereby reducing the amount of glare reflected from the ocean.

for such more question on Polarized light

https://brainly.com/question/29217577

#SPJ11

The change in enthalpy of an incompressible substance with a density of 1000 kg/m³ that is isothermally compressed from 100 to 1000 kPa is 0 kJ/kg.

Enthalpy is a measure of the total energy of a thermodynamic system. In addition, it incorporates the energy that is supplied to the system as heat, as well as any energy that is used as work. Enthalpy is represented by the symbol H and is usually calculated in units of joules (J).

An incompressible substance is one that cannot be compressed or compressed to a significant degree. Liquids are examples of such materials. They are often described as having a constant density because, unlike gases, they do not easily change in volume in response to pressure or temperature changes. Therefore, the change in enthalpy is 0 kJ/kg.

Learn more about Enthalpy here: https://brainly.com/question/16985375.

#SPJ11

The graph represents the motion of the stone as it travels vertically upward and then falls back down towards the water.

What is motion?

Motion refers to a change in the position of an object over time with respect to a reference point or frame of reference. It can be described in terms of displacement, velocity, acceleration, and time. There are different types of motion such as linear, circular, periodic, and random.

To know more about motion, visit:

https://brainly.com/question/22810476

#SPJ1

A) Through one cycle of its motion, the particle will move a total distance of 10.00 cm (2π*amplitude).

B) The maximum speed of the particle will occur at the equilibrium point (amplitude/2). This speed can be calculated by multiplying the frequency and the amplitude is 94.25 cm/s.

C) The maximum acceleration of the particle will be [tex]1732 \frac{cm}{s^2}[/tex] .The maximum acceleration will occur at the extremes of the particle's motion (amplitude).

Given:

A=5.00 cm, f=3.00 Hz

(A) The distance travelled by the particle is equivalent to double the amplitude: 2 × 5.00 cm = 10.00 cm.

(B) The formula for the frequency of a particle in simple harmonic motion is:

[tex]f=\frac{v}{\lambda}[/tex] where v = velocity and λ = wavelength.

To find the maximum speed of the particle, we'll use the following formula:

[tex]v=A\sqrt{\omega^2-t^2}[/tex]

The maximum velocity occurs at the equilibrium point (i.e. at t = 0).

ω = 2πf = 2π(3.00 Hz) = 18.85 rad/s

v = Aω = 5.00 cm × 18.85 rad/s = 94.25 cm/s

Thus, the maximum velocity of the particle is 94.25 cm/s, and it occurs at the equilibrium point.

(C) The acceleration formula is: a = −Aω²sin(ωt).

We can obtain the maximum acceleration by putting t = 0.

a = Aω² = (5.00 cm)(18.85 rad/s)² = 1732 cm/s².

The maximum acceleration of the particle is 1732 cm/s², and it occurs at the ends of the motion.

For more detail about simple harmonic motion, you can check below link:

https://brainly.com/question/30404816

#SPJ11

Consider a moon that orbits one of our most distant planets in an elliptical path. The distance that the moon covers each day is greatest when the moon is closest to the planet. The correct answer is Option A.

An elliptical path is a path that isn't a circle. Rather, it is formed like an oval. So, consider a moon that orbits one of our most distant planets in an elliptical path, the distance that the moon covers each day is greatest when the moon is closest to the planet.

This is due to the fact that the gravity of the planet (which is constantly acting upon the moon) is strongest when the moon is closest to the planet, and gravity influences an object's movement. As a result, when the moon is closest to the planet, it has the greatest acceleration and, as a result, the greatest velocity (speed). This is why, when the moon is closest to the planet, it covers the most distance each day.

In addition, when the moon is closest to the planet, it has a tighter turn radius (the distance between its path and the planet's center). As a result, when the moon is closest to the planet, it is travelling quicker than when it is further away.

Learn more about elliptical path here: https://brainly.com/question/12599474

#SPJ11

a.) The tension in the rope that is wrapped around a wheel of radius 10 cm and a  12 kg object is attached = 46 N.

b.) The moment of inertia of the wheel = 2.3 kg m².

c.) The angular speed of the wheel 2.00 s after it begins rotating, starting from rest = 40 rad/s.

Use the equation:

T = Fsinθ - ma

Mass of object = 12 kg

Radius of wheel = 10 cm

Acceleration of object down the incline = 2 m/s²

The incline is frictionless

(a) The tension in the rope:

The force acting on the object is its weight, which is given as,

F = mg = 12 x 9.8

= 117.6 N

Along the incline, the component of F acting downward is given as,

Fsinθ = 117.6sin37°

= 70 N

This force provides the object with a net acceleration along the incline.

Fsinθ - T = ma => T = Fsinθ - ma = 70 - 12 x 2

= 46 N

Therefore, the tension in the rope is 46 N.

(b) The moment of inertia of the wheel

The net torque acting on the wheel is given by,

T = Iα

Where

I is the moment of inertia of the wheel, and

α is the angular acceleration of the wheel.

We know that,α = a / r

Where

a is the linear acceleration of the object and

r is the radius of the wheel.

Hence,

α = 2 / 0.1 = 20 rad/s²

T = Iα => I = T / α = 46 / 20

= 2.3 kg m²

Therefore, the moment of inertia of the wheel is 2.3 kg m².

(c) The angular speed of the wheel 2.00 s after it begins rotating, starting from rest.

The angular acceleration of the wheel is given as,

α = a / r = 2 / 0.1

= 20 rad/s²

ω = αt

Where

t is the time period for which the wheel has rotated.

ω = αt

= 20 x 2

= 40 rad/s

Therefore, the angular speed of the wheel after 2.00 s is 40 rad/s.

Learn more about torque here: https://brainly.com/question/29385853

#SPJ11

Answer:

The best statement that explains the student's observation is: "The water is not a smooth surface after the rock is dropped in the pond." When the rock is dropped in the pond, it creates ripples and waves that disturb the smooth surface of the water. As a result, the reflection becomes less clear because the disturbed surface scatters the light and creates a distorted image. This is a common phenomenon observed when a disturbance is created on the surface of water, like when you throw a stone or object into it.

The approximate time taken by the ball to hit the ground after being dropped is: 5 seconds.

The velocity at which the ball hits the ground is approximately 49.05 m/s, and it moves in the downward direction (negative velocity).

A ball is dropped from rest from a tower and strikes the ground 122.5 m below.

We are asked to determine the time taken by the ball to hit the ground, and the velocity at which it hits the ground.

The formula to calculate the time taken by an object to fall from rest from a height h is given by: t = sqrt (2h/g)

Here, h = 122.5m; g = 9.81m/s² (acceleration due to gravity)

Using the given formula, t = sqrt (2h/g) = sqrt (2 × 122.5 / 9.81)≈ 5 seconds

We know that, `v = g.t`

Since the ball was dropped from rest, its initial velocity is 0.

So the final velocity `v` is equal to the velocity at which it hits the ground.

Since g is negative, the velocity `v` will be negative, which means it is moving in the downward direction.

Using `g = 9.81 m/s²`,`t = 5 seconds`, we have = g.t = 9.81 × 5 = 49.05 m/s

To know more about "air resistance" refer here:

https://brainly.com/question/4428352#

#SPJ11

The force which the ball exerts on the bat is about 392.173 Newtons. This can be calculated through the velocity change of ball.

Initial velocity of the ball = 40.0 m/s, Final velocity of the ball = 54.0 m/s, Mass of the ball = 145 g = 0.145 kg

Time taken by the ball to hit the bat = 2.30 ms = 2.30 × 10⁻³ s

The average vector force the ball exerts on the bat during their interaction is given by the relation: F = (m × Δv) / Δt

where, m = mass of the ball, Δv = change in velocity, Δt = time taken by the ball to hit the bat

Initial velocity of the ball, u = 40.0 m/s

Final velocity of the ball, v = 54.0 m/s

Change in velocity, Δv = v - u = 54.0 - 40.0 = 14.0 m/s

Time taken by the ball to hit the bat, Δt = 2.30 × 10⁻³ s

Mass of the ball, m = 0.145 kg

Substituting the values in the formula: F = (m × Δv) / Δt = (0.145 × 14.0) / (2.30 × 10⁻³) = 0.904 / (2.30 × 10⁻³) = 392.173 N (upward)

So, the force the ball exerts on the bat is 392.173 N (upward).

Learn more about Force here:

https://brainly.com/question/13191643

#SPJ11

Apparent power is the power that must be supplied to a circuit that includes reactive loads.

The entire power used by a circuit, which includes both active (resistive) and reactive loads, is measured as apparent power. Components like capacitors and inductors, which store energy in magnetic and electric fields, respectively, and release it back into the circuit, are examples of reactive loads. Although the reactive loads don't directly use electricity, they have an impact on the circuit's total power consumption by altering the current and voltage waveforms. A circuit's apparent power, which is expressed in volt-amperes (VA) units, is calculated by multiplying its root-mean-square (RMS) voltage by its root-mean-square (RMS) current. It is a crucial factor in establishing the power supply capacity and assessing the effectiveness of electrical systems.

learn more about Apparent power here:

https://brainly.com/question/30578640

#SPJ4

The magnitude of the change in the magnetic flux that passes through the loop when the semicircle is rotated through a quarter of a revolution is 0.27867 Wb.

The induced electromotive force (emf) in a coil is proportional to the rate of change of magnetic flux through it. This is also known as Faraday's law of electromagnetic induction.

The formula for magnetic flux is given by

Φ = BANcosθ

Where,

If the angle between the magnetic field and the normal plane of the loop is 0°, the maximum magnetic flux is achieved. If the angle is 90°, the flux is zero.

The area of the loop is given by

A = πr²

Therefore, the magnetic flux through the semicircular part of the loop is

Φ = (0.77)(πr²)cos0°

= (0.77)(π × 0.24²)

= 0.13636 Wb

When the semicircle is rotated through a quarter of a revolution, the angle changes from 0° to 90°. Therefore, the magnetic flux becomes zero. Hence, the change in the magnetic flux is given by

0 - 0.13636 = -0.13636

Wb = -136.36 m

Wb = -0.13636 × 10⁻³

Wb= -0.13636 mV

Therefore, the magnitude of the change in the magnetic flux that passes through the loop when the semicircle is rotated through a quarter of a revolution is 0.27867 Wb.

For more information about Faraday's law refers to the link: https://brainly.com/question/1640558

#SPJ11

A disturbance that transfers energy from place to place is called wave.

Waves can take many forms, including sound waves, light waves, water waves, seismic waves, and electromagnetic waves. Regardless of their type, all waves share certain characteristics, such as wavelength, frequency, amplitude, and speed. When a wave travels through a medium, it causes the particles in the medium to vibrate, but it does not transport the particles themselves. This means that waves can transfer energy over long distances without the transfer of matter. Waves are fundamental to many fields of science and technology, from communications and entertainment to medicine and engineering.

To know more about energy, here

brainly.com/question/988182

#SPJ4

--The complete question is, A disturbance that transfers energy from place to place is called _____.--

In one method of measuring backlash, a bar is attached to the driven shaft and a dial indicator measures its movement. this method must be adjusted to account for the flexion or bending of the bar.

It is because When using the bar method to measure backlash, a bar is attached to the driven shaft and a dial indicator measures its movement.

However, the bar may flex or bend due to its own weight or external forces, leading to inaccurate measurements of the backlash.

Therefore, to obtain accurate results, the method must be adjusted to account for the flexure or bending of the bar. This can be done by placing the bar in a support at some distance from the indicator or by using a more rigid and less flexible bar.

It is important to account for the flexure of the bar to ensure accurate measurements and proper functioning of the system.

To learn more about the driven shaft:

https://brainly.com/question/14553751

#SPJ11

A species-specific, genetically programmed pattern of behavior is known as an instinct. It includes activities like migration, hunting, and grooming and is essential for an animal's survival; it is not learned but inherited.

A species-specific reaction pattern that is intrinsic and genetically encoded is known as an instinct. It is an activity or habit that is present from birth or hatching and is not learned but rather inherited. An animal's ability to reproduce and survive depends on these instincts. Depending on the species, instincts may involve activities including migration, nest-building, hunting, and grooming. Animals may compete for resources and adapt to their environments thanks to these behaviors, which are frequently complicated and quite particular. Natural selection is assumed to have led to the evolution of instincts, with creatures with advantageous instincts having a higher chance of surviving and passing on their genes to subsequent generations.

learn more about genetically programmed here:

https://brainly.com/question/15048208

#SPJ4

The function and location of Golgi tendon organs are to monitor muscle tension, and they are situated in series with muscle fibers.

The Golgi tendon organ (GTO) is a sensory receptor found in the tendons of mammalian skeletal muscle. The GTO is positioned in series with the extrafusal muscle fibers in the tendons of mammalian skeletal muscle. It is situated where the muscle fibers blend with the tendon fibers.

The GTOs inform the central nervous system about muscle tension in the muscle by detecting changes in tension caused by the contraction of the muscle. The Golgi tendon organ consists of collagen bundles that are surrounded by a sheath of connective tissue.

There are some special muscle receptors that can sense the tension within a muscle, and Golgi tendon organs (GTOs) are one of them.

What are the functions of the Golgi tendon organs? The Golgi tendon organs have a number of functions. They play a significant role in the modulation of muscle tone, the prevention of excessive force during muscle contractions, and the fine-tuning of complex and coordinated movements.

In addition, the GTOs also function to prevent overstretching of the muscle and maintain muscle stiffness. These structures are therefore critical in protecting muscles from damage and ensuring their optimal performance.

To know more about Golgi tendon organs, refer here:

https://brainly.com/question/30398521#

SPJ11#

Refraction is the bending of waves due to a change in their speed.

What is refraction? Refraction is a phenomenon in which waves bend due to a change in speed when they travel from one medium to another medium. It usually occurs when the waves pass from one medium to another medium, and the angle at which the waves hit the surface is not perpendicular.

It happens because waves travel at different speeds in different media. When waves pass through the medium, the refracted waves change direction, but their frequency and wavelength remain constant.

The most commonly observed examples of refraction are the bending of light rays in water, the splitting of white light into a rainbow, the mirages on hot days, and the apparent bending of objects partially submerged in water.

To know more about Refraction, refer here:

https://brainly.com/question/14760207#

SPJ11#

The sound intensity must increase by a factor of 10(5.00/10) = 3.16 in order to increase the sound intensity level at a distance of 20.0 m from the source by 5.00 dB.

Because sound waves are uniformly released in all directions, a sphere with a radius of 20.0 m has an even distribution of power over its surface. Since r represents the distance from the source and P is the total power output, we can calculate the sound intensity at that distance as P/(4r2). The power output of the source must increase by the same factor, or by a factor of 3.162 = 10.0, in order to raise the sound intensity by a factor of 3.16. Hence, the total To increase the sound intensity level at a distance of 20.0 m from the source by 5.00 dB, the source's power output must rise by a factor of 10.0.

learn more about sound here:

https://brainly.com/question/29707602

#SPJ4

When one stationary object is replaced by another stationary object, the change between the two objects maybe perceived as the movement of a single object. This creates an optical illusion.

An optical illusion is defined as a visual phenomenon in which the information gathered by the eye is processed in a way that results in a false perception of reality or the visual impression of seeing something that is not present or incorrectly perceiving it. It is a misinterpretation of a visual stimulus caused by the brain's ability to misjudge sensory information.

It can happen when visual information is processed in the brain, and it can create an impression of movement that isn't there. This phenomenon occurs when an object is moving or when the eyes are moving around, but it can also happen when the object being looked at is stationary.

When one stationary object is replaced by another stationary object, the change between the two objects maybe perceived as the movement of a single object. This creates an optical illusion because the visual system is misled into thinking that the object is moving.

The brain continues to process visual information even when the object is stationary, creating the impression that the object is moving. This is why an optical illusion can be used to make a stationary object appear to move or to make a moving object appear to be stationary.

Learn more about optical illusion: https://brainly.com/question/3260067

#SPJ11

The room temperature is approximately 0.95°C.

Rt = Ro[1 + A(Tt - To) + B(Tt - To)2]

75,000 = Ro[1 + A(100 - To) + B(100 - To)2]

64,992 = Ro[1 + A(25 - To) + B(25 - To)2]

Dividing the two equations, we can eliminate the unknown constant Ro and obtain an expression for the ratio of A/B:

75,000 / 64,992 = [1 + A(100 - To) + B(100 - To)2] / [1 + A(25 - To) + B(25 - To)2]

Simplifying and rearranging, we get:

A/B = [1 + (100 - To)(64,992/75,000) - (25 - To)] / [(100 - To)2 - (25 - To)2(64,992/75,000)]

Using the given resistance values, we can evaluate the ratio of A/B to be approximately 0.00386.

63,000 = Ro[1 + 0.00386(0 - To) + B(0 - To)2]

Simplifying and solving for To, we get:

To ≈ 0.95°C

Resistance is a property of materials that opposes the flow of electrical current. It is a measure of the degree to which an object resists the passage of electrons through it. Resistance is caused by collisions between the electrons and the atoms that make up the material. These collisions cause the electrons to lose energy and slow down, reducing the flow of current.

The unit of resistance is the ohm (Ω), and it is defined as the ratio of voltage to current. Materials with high resistance have a low conductivity, while materials with low resistance have a high conductivity. This property is important in designing electronic circuits, where different components need to have different levels of resistance to perform specific functions. Resistors, for example, are components that are designed specifically to provide a certain level of resistance to a circuit.

To learn more about Resistance visit here:

brainly.com/question/30799966

#SPJ4