A car generator turns at 400 rpm (revolutions per minute) when the engine is idling. It has a rectangular coil with 300 turns of dimensions 5.00 cm by 5.22 cm that rotates in an adjustable magnetic field. What is the field strength needed to produce a 24.0 V peak emf

Answers

Answer 1

The field strength needed to produce a 24.0 V peak emf is 0.73T.

To find the answer, we need to know about the expression of emf.

What's the expression of peak emf produced in a rotating rectangular loops?

The peak emf produced in a rotating loops= N×B×A×wN= no. of turns of the loop, B= magnetic field, A= area of loop and w= angular frequencySo, B = emf/(N×A×w)What's the magnetic field applied to the loop, when rectangular coil with 300 turns of dimensions 5.00 cm by 5.22 cm rotates at 400 rpm produce a 24.0 V peak emf?N= 300, A= 5cm × 5.22cm = 0.05m × 0.0522m = 0.00261 m²Emf= 24V, w= 2π×400 rpm= 2π×(400rps/60) = 42 rad/sNow, B= 24/(300×0.00261×42)

B= 24/(300×0.00261×42) = 0.73T

Thus, we can conclude that the magnetic field is 0.73T.

Learn more about the electromagnetic force here:

brainly.com/question/13745767

#SPJ4


Related Questions

A parcel is traveling on a horizontal conveyer belt moving at 1 meter/second. At the end of the conveyor belt, the parcel lands on a tray after 1 second. Calculate the horizontal and vertical distance of the tray from the end of the conveyor belt.

Answers

A parcel is traveling on a horizontal conveyer belt moving at 1 meter/second. At the end of the conveyor belt, the parcel lands on a tray after 1 second. The horizontal distance is 1 meters and vertical distance of the tray from the end of the conveyor belt is 4.9 meters.

The conveyer belt's horizontal speed is 1 m/s.

The parcel settles on a tray at the end of the conveyor belt after 1 second. Finding the tray's horizontal and vertical distance from the conveyor belt's end is necessary.

D = v x t for horizontal distance

D= 1x1

d = 1 meter

Utilize the second equation of motion as follows for vertical distance:

s= ut+1/2gt²

Initially  vertical velocity is zero

s= ut+1/2gt²

s = 0+1/2 9.8 x(1)²

S=4.9 meters.

Therefore, the tray is 1 meters and 4.9 meters away from the end of the conveyor belt, respectively, in both the horizontal and vertical directions.

Learn more about distance at https://brainly.com/question/14520809

#SPJ4

In which digestive organ does the majority of lipid digestion and absorption occur?

Answers

The digestive organ that the majority of lipid digestion and absorption occur is the small intestine.

What is the small intestine?

The small intestine is a part of the digestive system that is made up of the duodenum, jejunum, and ileum. It is the part of the digestive system that will follow the stomach.

This part of the intestine will be in charge mainly of the digestion of lipids, this process will begin in the mouth and in the stomach but then the digestion will take place in the small intestine with the help of lipase enzymes which will break the lipid molecules. After this process happens, the absorption of the lipids that will travel through circulation and go throughout the body will take place.

Therefore, we can confirm that the digestive organ that the majority of lipid digestion and absorption occur is the small intestine.

To learn more about small intestine visit: https://brainly.com/question/1751875

#SPJ1

how potential difference varies in a parallel circuit versus a series circuit.

Answers

Answer:

A variable amount of current travels through each parallel branch of the circuit in a parallel circuit. Each component in a series circuit has a separate voltage across it. The same voltage is present across all of the circuit's components in a parallel circuit, though.

Explanation:

a 200-kg vehicle travelling 30 m/s takes 10 s to stop. what force did the vehicle experience? show your work

Answers

Answer:

F = 600 N

Explanation:

m = 200 kg

u = 0 m/s 3

v = 30 m/s

t = 10 s

a = v-u /t

  = 30 - 0 / 10

  = 30 / 10

  = 3 m/s²

F = m a

  =  200 × 3

  =  600 N

calculate the work done when a 50 kg object is lifted 5 meters. work energy theorem and coe w=fd

Answers

The image of your face will be located 66.5 cm behind the front surface of the Christmas tree ball.

What is surface?

Surface is the outer layer of a physical object, such as a planet or a star. It is also the top layer of an object, such as the ground or a body of water. Surface can refer to the interface between two objects, such as the atmosphere and the ocean, or the interface between two materials, such as the air and the ground. The term can also refer to the top layer of a material, such as the skin of a human or the bark of a tree. In some cases, surface can refer to the way a material or object looks or feels, such as the smoothness of a rock or the texture of a fabric.

This is because of the principles of spherical mirrors; the image is located twice the distance behind the mirror as the object is in front of it. Therefore, the distance between your face and the image of your face is 58.0 cm (29.0 cm + 66.5 cm). The answer is expressed to two significant figures, and the appropriate units are included.

To know more about surface click-
https://brainly.com/question/29719172
#SPJ1

I need help, It would be lovely if someone could explain this to me

Answers

The kinematic equation of motion used to find the time, velocity, and acceleration of the motion in the questions are as follows;

8. The time it takes the runner to get to full speed is 5 seconds

9. The acceleration is 166.[tex]\overline{6}[/tex] m/s²

10. The initial velocity is 550 m/s

11. It takes the sketer 8 seconds

12. The acceleration of the fan is -6·π rad/s²

13. The speed with which the zebra hits the ground is 98 m/s

14. The acceleration of the school bus is -100 m/s²

15. 5 seconds ago the velocity of the jet was 4250 m/s

What are the kinematic equations of motion?

The kinematic equations of motion are;

v = u + a·t

s = u·t + (1/2)·a·t²

v = u + 2·a·s

Where;

v = The final velocity

u = The initial velocity

s = The distance

t = The time of the motion

a = The acceleration

8. The runner's rate of acceleration = 2 m/s²

The runner's top speed = 10 m/s

The required kinematic equation is; t = (v - u)/a

Where;

t = The time duration

a = The acceleration = 2 m/s²

v = The final velocity = The runner's top speed = 10 m/s

u = The initial velocity of the motion = 0 (assumption that the runner starts from rest)

Therefore;

t = (10 - 0)/2 = 5

It takes the runner 5 seconds to get up to full speed

9. The speed of the bullet when it hits the bystander, v = 250m/s

The time at which the bullet was shot out of the high powered rifle, t = 1.5 seconds

The initial velocity of the bullet, u = 0m/s (The bullet is initially at rest in the gun)

The acceleration, a = (v - u)/t

Acceleration = (250 - 0)/1.5 = 166.[tex]\overline{6}[/tex]

The acceleration of the bullet is 166.[tex]\overline{6}[/tex] m/s²

10. The acceleration of the person as he falls, a = 10 m/s²

The speed at which the person was travelling as he hits the ground, v = 600 m/s

Time after which the person hits the ground, t = 5 seconds

v = u + a·t
u = v - a·t

Therefore; u = 600 - 10 × 5 = 550

The initial velocity of the person is 550 m/s

11. The acceleration rate, a = 2 m/s²

Initial velocity, u = -6m/s

Final velocity, v = 10m/s

t = (10 - (-6))/2 = 8

The time it takes the skater is 8 seconds

12. The initial angular velocity of the fan, ω₁ = 9 rev/sec

1 rev = 2·π rad, therefore;

ω₁ = 2·π × 9 rad/s = 18·π rad/s

The time after which the fan stops, Δt = 3 seconds

The final angular velocity of the fan, ω₂ = 0

The angular acceleration of the fan, α = (ω₂ - ω₁)/Δt

Therefore; α = (0 - 18·π)/3 = -6·π

The acceleration of the fan is -6·π rad/s²

13. The time it takes the zebra to hit the ground = 10 seconds

The acceleration due to gravity, g = 9.8 m/s²

The initial velocity of the zebra, u = 0 m/s

Therefore;

The velocity with which the zebra hits the ground, v = 9.8 × 10 = 98

The zebra hits the ground moving at 98 m/s

14. Initial speed of the school bus, u = 50 m/s

The time it takes the school bus to come to rest = 0.5 seconds

The acceleration. a = (0 m/s - 50 m/s)/(0.5 s)) = -100 m/s²

15. The acceleration of the jet = 150 m/s²

Current velocity of the jet = 5000 m/s

The initial speed of the jet, u, 5 seconds ago is therefore;

u = 5000 - 150 × 5 = 4250

The initial speed of the jet 5 seconds ago is 4250 m/s

Learn more about the kinematic equations of motion here: https://brainly.com/question/14356122

#SPJ1

A 3.2 kg rock is initially at rest at the top of a cliff. Assuming the rock falls into the sea at the foot of the cliff and that its kinetic energy is transferred entirely to the water, how high is the cliff if the temperature of 1.00 kg of water is raised 0.10°C? (Neglect the heat capacity of the rock.)

Answers

At the base of the cliff, a boulder falls into the water, transferring all of its kinetic energy to the ocean. The cliff must be 14.6 meters high.

What are some instances of kinetic energy?

Kinetic energy, which may be seen in the movement of an item or subatomic particle, has been the energy of motion. Example of angular momentum in action include a person walking, a baseball soaring through the air, a piece of food falling from a table, and a chargeable particle inside of an electric field.

mass of rock m_r = 3.0Kg

mass of water is m_w = 1.0Kg

temperature variation ΔT= 0.10°C

heat of water C_W = 4186 J/Kg °C

gravity g=9.8 m/sec^2

the expression for height,

mrgh = K

h = K/(mrg)

Evaluating numerically.

h = K / (mr g)

h = (418.6 J)/(3.2Kg⋅9.8 m/sec^2 )

h = 14.6 m

To know more about kinetic energy visit:

https://brainly.com/question/26472013

#SPJ1

Two asteroids in space are 67,000m apart. One of the asteroids has a mass of 34,000kg and the other has a mass of 15,000kg. What is the force between them. In order to earn all credit show all your work.

Answers

Answer: The force between the two asteroids is 2.25 x 10^-5 N.

PLEASEEEE GIVE BRANLIEST

Explanation:

The force between two objects in space can be calculated using the formula:

F = G * (m1 * m2) / r^2

Where:

F = force between the two objects

G = gravitational constant (6.67 x 10^-11 Nm^2/kg^2)

m1 = mass of object 1

m2 = mass of object 2

r = distance between the two objects

So, in this case:

F = 6.67 x 10^-11 Nm^2/kg^2 * (34000 kg * 15000 kg) / (67000 m)^2

To calculate the force between the two asteroids, we need to substitute the values for m1, m2, and r into the formula.

F = 6.67 x 10^-11 Nm^2/kg^2 * (34000 kg * 15000 kg) / (67000 m)^2

F = (2.25 x 10^-5 N)

So the force between the two asteroids is 2.25 x 10^-5 N.

A hockey puck (0.50 kg) is in contact with the stick for 0.2 seconds. If the force on the hockey puck is 25 N, what is the change in speed of the hockey puck?

Answers

The change in speed of the hockey pack is 10m/s.

How to calculate speed?

Speed refers to the rate of motion or action, specifically the magnitude of the velocity; the rate distance is traversed in a given time.

The speed of an object can be calculated using the following formula:

F = m × (v/t)

where;

"m" is the mass of the object"v" is the desired velocityt = time

According to this question, a hockey puck (0.50 kg) is in contact with the stick for 0.2 seconds. If the force on the hockey puck is 25 N, the speed can be calculated as follows:

25 = 0.5 × (v/0.2)

25 = 2.5v

v = 10m/s

Therefore, 10m/s is the change in the speed of the hockey pack.

Learn more about speed at: https://brainly.com/question/13954313

#SPJ1

Elements are arranged in the periodic table based on various patterns. For example, the element magnesium (mg).

Answers

Elements are arranged in the periodic table based on various patterns. For example,  the element magnesium (Mg) A. has a higher atomic mass than the element sodium (Na). Option C is correct.

Describe the periodic table.

The known elements are arranged in the periodic table in increasing atomic number order and repeating chemical properties.

They are arranged in a tabular fashion, with each row denoting a certain era and each column denoting a particular group.

The elements are arranged in ascending atomic number sequence from top to bottom and left to right.

Elements belonging to the same group will have similar chemical properties because they will have the same valence electron configuration.

The periodic table's arrangement of elements follows a number of different patterns. For instance, sodium (Na) and magnesium (Mg) both have higher atomic masses (Na).

As a result, choice C is accurate.

Your question is incomplete but most probably your full question was Elements are arranged in the periodic table based on various patterns. For example, the element magnesium (Mg) has

a. a higher atomic mass than the element calcium (Ca).

b. has a lower atomic mass than the element beryllium (Be).

c. has a higher atomic mass than the element sodium (Na).

d. all of these

To learn more about periodic table, refer;

brainly.com/question/11155928

#SPJ4

Two freight cars, each with a mass of 2.3 ✕ 105 kg, collide and stick together. One was initially moving at 3.2 m/s and the other was at rest. What is their final speed?

Answers

It is also commonly abbreviated as ms−2. For example, if the velocity of a particle moving in a straight line changes uniformly (at a constant rate of change) from 2 m/s to 5 m/s over one second, then its constant acceleration is 3 m/s2.

How to find a final speed?A change in velocity that does not alter over time is referred to as a constant acceleration. A car's average acceleration stays constant at 20 mph per minute even if it increases its speed by 20 mph in one minute and another 20 mph the next. In other words, if an object is falling freely on Earth, gravity will cause it to accelerate (or move faster) by 9.81 metres every second. Gravity actually is constant throughout space. If an object travels the same distance at the same rate and does not change its direction, its velocity is constant. The item experiences acceleration whenever there is a change in velocity. Therefore, whenever the velocity's size or direction.

To learn more about final speed refer to:

https://brainly.com/question/27086636

#SPJ1

Describe an experiment to investigate the relation between efficiency and load using a block and tackle pulley system.​

Answers

Answer:

An experiment to investigate the relationship between efficiency and load using a block and tackle pulley system could be set up as follows:

1.Set up a block and tackle pulley system, with a fixed pulley at the top and a movable pulley at the bottom. The pulleys should be mounted on a sturdy frame, and the rope should be of a known length and thickness.

2.Attach a weight to one end of the rope, and a load cell to the other end. The load cell will measure the force applied to the rope.

3.Record the weight of the load and the force applied to the rope using the load cell.

4.Measure the distance the load is raised, and record this distance.

5.Repeat steps 3 and 4 for different loads, increasing the weight of the load in increments of, for example, 5 kg.

6.Calculate the efficiency of the pulley system for each load by dividing the work output by the work input and multiplying by 100. The efficiency of the system can be calculated as follows: Efficiency = (Work out / Work in) * 100.

7.Plot a graph of efficiency against load, and observe the relationship between the two variables.

8.Repeat the experiment with different pulley systems, such as a single pulley system and a double pulley system and compare the results.

9.Record the results and any observations and Analyze the data and make conclusions about the relationship between efficiency and load in a block and tackle pulley system.

after a day of testing race cars, you decide to take your own 1560 kg car onto the test track well moving down the track at 10 m/s. You suddenly accelerate to 27 m/s in eight seconds. What is the average net force that you have applied to the car during the eight second interval?

Answers

The force applied to the car of mass 1560 kg is 1365 N.

What is force?

Force is the product of mass and acceleration.

To calculate the force applied to the car, we use the formula below.

Formula:

F = m(v-u)/t............................ Equation 1

Where:

F = Forcem = Massv = Final velocityu = Initial velocityt = Time

From the question,

Given:

m = 1560 kgv = 27 m/su = 10 m/st = 8 s

Substitute these values into equation 1

F = 1560(27-10)/8F = 1560×7/8F = 1365 N

Hence, the force applied is 1365 N.

Learn more about force here: https://brainly.com/question/12785175

#SPJ1

A 1000 kg go-kart is moving at a constant speed of 23 m/s. How much kinetic energy does it have?

Answers

The kinetic energy possesed by a 1000kg go-cart that is moving at a constant speed of 23 m/s is 264,500J.

How to calculate kinetic energy?

Kinetic energy is the energy possessed by an object because of its motion, equal (nonrelativistically) to one half the mass of the body times the square of its speed.

Kinetic energy of a body can be calculated using the following formula;

K.E = ½mv²

According to this question, a 1000kg go-cart is moving at a constant speed of 23m/s. The kinetic energy of the cart can be calculated as follows:

K.E. = ½ × 1000 × 23²

K.E. = 500 × 529

K.E. = 264,500J

Therefore, 264,500J is the kinetic energy of the go-cart.

Learn more about kinetic energy at: https://brainly.com/question/26472013

#SPJ1

A single raindrop illuminated by sunshine disperses:

Answers

A single raindrop illuminated by sunshine disperses the white light into seven colors spectrum.

A white sunlight consists of seven different color components. These color components have different wavelength. The speed of different components is different when they passes through an optically denser medium(e.g.: prism). So each color component gets bent by a certain amount thus causing dispersion.

A raindrop acts like a prism for the sunshine. When a light ray passes through a rain drop, it splits into seven color component which is known as the dispersion of light.  

To know more about wavelength, here

https://brainly.com/question/13533093

#SPJ4

Speed and velocity
Number 1-5​

Answers

10 m/s12.5 m/s20 m/s8.667 m/s 50 seconds

Average speed = total distance covered/ total time taken

here on the graph y-axis is represented as distance and x-axis is showing time

So for the average speed of Train (line A)

total distance covered (d) = 1500 m

total time taken to reach that distance (t) = 150 s

so by a simple formula

d/t1500/15010 m/s

For the average speed of  Car (line B)

Total distance covered (d) = 1500 m

total time taken to reach that distance (t) = 120 s

so by

d/t1500/12012.5 m/s

For Maximum speed of roller- coaster (LineC)

So in the time between 70-80 seconds, it has the highest slop which shows the speed maximum at that time

In that 10 seconds, it covered 200 meters which shows its maximum speed which is

d/t200/1020 m/s

For the average speed of a Roller- coaster (line C)

Total distance covered (d) = 1300 m

total time taken to reach that distance (t) = 150 s

Speed = d/t1300/1508.667 m/s

For the Train to Stoped at a station we can see from 40 seconds to 90 Seconds train has covered almost 0 distance which clearly shows that it was stopped which is 90-40= 50 seconds.

Learn more about Average Speed: https://brainly.com/question/4931057

What will irregular galaxies eventually form into before transitioning into something else
billions of years later?
1.total galaxies
2.meteorite galaxies
3.dwarf galaxies
4.spiral galaxies

Answers

After a period, they start to collide with other galaxies, which causes them to become irregular galaxies. They eventually transform into ancient elliptical galaxies after exhausting all of their dust and gas to form new stars.

Do atypical galaxies produce stars?

It is possible to think of irregular galaxies as star formation research labs. In contrast to the more well-known spiral galaxies, this kind of galaxy produces stars from an interstellar medium that has undergone less chemical evolution.

What occurs to erratic galaxies?

Typically, irregular galaxies are tiny, with a mass of only a tenth that of the Milky Way galaxy. They are vulnerable to environmental influences like colliding with massive galaxies and cosmic clouds because of their modest sizes.

To know more about Elliptical galaxies visit:

https://brainly.com/question/24985948

#SPJ1

A 2250 kg cartraveling to the east slows down uniformly from 20 m/s to 5 m/s. How long does it take to decelerate if the braking force is 7500 N to the west?

A. 3 seconds
B. 4.5 seconds
C. 6 seconds
D. 7.5 seconds

Answers

The time taken for the car to decelerate is 4.5 seconds.

option B.

What is the acceleration of the car?

The acceleration of the car is calculated from Newton's second law of motion as follows;

F = ma

a = F / m

a = ( 7500 ) / ( 2250 )

a = 3.33 m/s²

The time taken for the car to slow down is calculated as follows;

v = u + at

at = v - u

t = ( v - u ) / a

where;

v is the final velocity u is the initial velocity

t = ( 20 - 5 ) / 3.33

t = 4.5 seconds

Learn more about time of motion here: https://brainly.com/question/2364404

#SPJ1

For a liquid drop of radius r falling in air with terminal velocity, power delivered by gravitational force is proportional to.

Answers

P = m g v is the essential formula for power. Power therefore follows velocity (v).

Power, what is it?

The amount of effort finished in a specific length of time is a definition of power. The SI power measurement is the wattage (W), that is derived from watts per square meter per second (J/s). Horsepower (hp) is a measuring unit sometimes used to express the power of automobiles and other equipment. It is roughly comparable to 745.7 watts.

The link among work and time is what is known as power.

P = W / t

In the case of a drop descending, the applied load and the displacement have the same direction, hence the angle in between them is negative and the cosine of zero is only one (cos 0 = 1). The work is defined as the product rule of the force and also the displacement.

W = F y

The relationship between the gravitational force and the drop's mass is F = mg.

W = mg y

we substitute

P = m g y / t

terminal velocity of the drop is constant

P = m g v

To know more about Gravitational force visit:

https://brainly.com/question/12528243

#SPJ4

A workman carries some lumber up a staircase. The workman moves 9. 6 m vertically and 22 m horizontally. If the lumber weighs 45 n, how much work was done by the workman?.

Answers

The required work was done by the workman is 432 J.

Define work done by object?

Work is the energy exerted by an object as it applies a force to move another object over some distance. For a given amount of force, F, and a given distance, d, the work done on an object is given by the formula W=F⋅d .

We have,

Weight = Force due to gravity = -45j N

Total displacement = 22i + 9.6j Meter

Now,

Work done by gravity = -F.d = Work done by man

W = -45j(22i + 9.6j ) J

W =  -45( 9.6) = -432 J

Thus, work done by man is 432 J

To know more about work visit:

https://brainly.com/question/18094932

#SPJ4

a ball player catches a ball 3.40 ss after throwing it vertically upward. part a with what speed did he throw it?

Answers

The speed of the ball that the ball player throw is 16.66 m/s.

The ball player throws a ball vertically upward and then catches the ball. It means, the ball doing vertical motion travel upward to the highest point and then goes down until the ball player catches it. The trajectory of the ball as it goes up is symmetrical to the trajectory of the ball as it goes down.

The time to travel upward is equal to the time to travel downward
t₁ = t₂Travel time = t = 3.40 s

travel time = travel time upward + travel time downward

t = t₁ + t₂

3.40 = t₁ + t₁

3.40 = 2t₁

t₁ = 3.40 ÷ 2

t₁ = 1.70 s

When the ball travels upward, non-uniform motion applies

v₂ = v₁ + at

a = the acceleration
a = - g because it is against the acceleration due to gravity (g)
a = - 9.8 m/s²t = travel time
t = t₁ = 1.70 sv₁ = initial speed
The speed when the ball player throws the ball.v₂ = the final speed
At the highest point, the speed equals zero. Because the ball will be at rest and then moving downward.
v₂ = 0

v₂ = v₁ + at₁

0 = v₁ + (- 9.8 × 1.70)

0 = v₁ - 16.66

v₁ = 16.66 m/s

Learn more about vertical motion here: https://brainly.com/question/27526920

#SPJ4

A tsunami wave has a wavelength of 160,000 m and a frequency of .0014 HZ

A wind driven wave has a wavelength of 150 and a frequency of 0.083 HZ

What would be the velocity of each wave? Show your calculation

Answers

Velocity is a physical vector quantity that is defined by magnitude and direction. A coherent derived unit called speed is used to indicate the magnitude or absolute value (scalar) of velocity. In the SI, its value is represented in meters per second (m/s or m/s1) (metric system).

What is velocity?

When an object is traveling, its velocity is the direction it is travelling in to indicate how quickly the object's location is changing as seen from a particular point of view and as measured by a certain unit of time, such as 60 km/h in a northerly direction. The idea of velocity serves as a key building component in kinematics, the branch of classical mechanics that analyzes how bodies move.

The velocity of a wave can be calculated using the wavelength (λ) and frequency (f) of the wave using the formula:

Velocity = wavelength x frequency

For the tsunami wave:

Velocity = 160,000 m x .0014 Hz = 224 m/s

For the wind-driven wave:

Velocity = 150 m x 0.083 Hz = 12.45 m/s

So the velocity of the tsunami wave is 224 m/s and the velocity of the wind-driven wave is 12.45 m/s.

To know more about velocity visit:

https://brainly.com/question/18084516

#SPJ1

Please Help! Show all work, please! Thank you!
70!! points!

Answers

The Kinetic energy will be 19663 J that is approximately 2.0 × 10³ J option B.

What precisely is kinetic energy?

An object or particle has kinetic energy because of its motion. When an item undergoes work—the transfer of energy—by being subjected to a net force, it accelerates and acquires kinetic energy. It's SI unit is Joules.

Given, mass of the car, m = 1400 kg

velocity of the car= 5.3 m/s

by applying the formula ,Kinetic Energy = 1/2×mass×velocity²

K.E. = 1/2×1400×(5.3)²

K.E = 700×28.09

K.E. =  19663 J ≈ 2.0 × 10³ J

The Kinetic energy will be 19663 J that is approximately 2.0 × 10³ J.

To know more about Energy visit :-

https://brainly.com/question/26472013

#SPJ1

Jet streams are associated with fronts because of the:

Answers

Due to the significant temperature gradient, jet streams are connected to fronts.

The upper-level winds' wave-like or meandering behavior in the middle latitudes is crucial for moving heat between the equator and poles.The cold front itself frequently brings a thin band of precipitation that travels along its leading edge. Strong bands of precipitation such as these have the potential to produce tornadoes, severe thunderstorms, hailstorms, snow squalls, and other severe weather. The correct response is "moisture and variations in air pressure." An air mass boundary, such as that between warm and cold air, is represented by a front. A cold front exists when cold air is moving toward warm air. However, if a warm air mass is advancing and a cold air mass is retreating.

To know more about jet streams here

https://brainly.com/question/791542

#SPJ4

A peanut burned in a calorimeter transfers 18,200 joules to 100.0 g of water. What is the rise in the water's temperature

Answers

The rise in the water's temperature, given that 18200 joules was transferred to the 100.0 g of water is 43.5 °C

How do I determine the temperature rise of the water?

Heat transferred I related to temperature rise by the following formula:

Q = MCΔT

Where

Q is the heat transferred M is the mass C is the specific heat capacity ΔT is the temperature rise

With the above formula, we can determine the temperature rise as illustrated below.

The following data were obtained from the question:

Heat transferred (Q) = 18200 JoulesMass of water (M) = 100.0 gSpecific heat capacity of water (C) = 4.184 J/gºC Temperature rise (ΔT) =?

Q = MCΔT

18200 = 100 × 4.184 × ΔT

18200 = 418.4 × ΔT

Divide both sides by 418.4

ΔT = 18200 / 418.4

ΔT = 43.5 °C

Thus, we can conclude from the above calculation that the temperature rise of the water is 43.5 °C

Learn more about temperature:

https://brainly.com/question/17107322

#SPJ1

'3. It takes a student 5 seconds to pull a 20 kg stack of books, initially at rest, 10
meters across a frictionless lab floor.
a. What was the final velocity of the books?
B.What was the rate of acceleration of the books?
C.What was the net force on the books

Answers

The books' final speed is 4 m/s, their rate of acceleration is 0.8 m/s2, and their net force is 3.2 m/s2.

What is called velocity?

The vectorial expression of velocity is the movement in space-time of an object or particle. The recognised unit of velocity magnitude is the metre per second (m/s) (also known as speed). The rate of speed can also be expressed in centimetres per second (cm/s). The pace at which an object's location changes as seen from a certain angle and as stated by a specific time unit (for example, 60 km/h northbound) is measured by its velocity, which is the direction in which it is travelling.

What is velocity in physics?

As a physical vector quantity, velocity must have a specified magnitude and direction. Speed is a coherent derived unit whose quantity is measured in metres per second (m/s or ms1) in the SI. Speed is the scalar absolute value (magnitude) of velocity (metric system). A vector is "5 metres per second east."

= ∆/∆

v=20/5 v=4

Therefore the final velocity of the book is 4m/s.

Acceleration= v/t

=4/5

=0.8m/s2

Thus acceleration of book is 0.8m/s2

F=0.8*4

F=3.2m/s2

Net force is 3.2m/s2

To know more about Velocity visit:

https://brainly.com/question/18084516

#SPJ1

what's the difference between nebula,protostar,and a star?

Answers

Answer:

Explanation

one is a galaxy and one is a Star.

A 400 Kg truck rushing through the street at 20 m/s crashes into a 50 Kg car making a turn at 2 m/s. The car is bounces off the bottom of truck at 142 m/s, what is the final velocity of the truck?

Answers

According to the given statement 2.5 m/s is the final velocity of the truck.

What is velocity vs speed?

Velocity is the pace and path of an item's movement, whereas speed is really the time rate that a object is travelling along a route. In other words, velocity is a vector, whereas speed is a scalar number. as the pace of a car driving south on a highway or the pace at which a rocket takes off.

Calculation :

Collision energy equals collision energy before collision

Afterward, we would have;

(400 * 20) + (50 * 2) = (50 * 142) + (400 * v)

8000 + 100 = 7100 + 400v

8100 - 7100 = 400v

v = 1000/400

v = 2.5 m/s

According to our estimation, the velocity is 2.5 m/s.

To know more about Velocity visit:

https://brainly.com/question/28738284

#SPJ1

According to the given statement 2.5 m/s is the final velocity of the truck.

What is velocity vs speed?

Velocity is the pace and path of an item's movement, whereas speed is really the time rate that a object is travelling along a route. In other words, velocity is a vector, whereas speed is a scalar number. as the pace of a car driving south on a highway or the pace at which a rocket takes off.

Explanation of the above answer:

Collision energy equals collision energy before collision

Afterward, we would have;

(400 * 20) + (50 * 2) = (50 * 142) + (400 * v)

8000 + 100 = 7100 + 400v

8100 - 7100 = 400v

v = 1000/400

v = 2.5 m/s

According to our estimation, the velocity is 2.5 m/s.

To know more about Velocity visit:

brainly.com/question/28738284

#SPJ1

A bird species gains a new trait from a neutral mutation. After many generations, the trait becomes beneficial. What could have caused the change in the mutations effect?

Answers

Mutations may alter the structure of a protein, may be neutral, may be dangerous, or may be advantageous.

A mutation is a change to an organism's DNA sequence. Viral infection, mistakes in DNA replication during cell division, and exposure to mutagens can all lead to mutations. Gametes experience germline mutations. Other bodily cells are susceptible to somatic mutations. Chromosome alterations are mutations that change the structure of a chromosome. A single nucleotide is altered by point mutations. Depending on the situation or place, the impacts of mutation could be beneficial, negative, or neutral. The majority of non-neutral mutations are harmful. The impact and likelihood that a mutation will occur increase with each extra base pair that it modifies.

To know more about mutation on

https://brainly.com/question/6592395

2. If a person pulls on a cart to the right with a force of 7 N and another person pulls to the left with a force of 13
N, what is the net force? Is it balanced or unbalanced? Label picture with direction arrows and numbers.
13N
a. net force =
b. Is it balanced or unbalanced?
C. How could the two people make their forces balanced?
7N

Answers

Answer:

1. Net force= 6 N to left

2. Unbalanced

3. Both people must apply same magnitude of forces in opposite direction which causes net force to be 0.

Explanation:

Since both forces have opposite direction then we have to subtract the magnitude and consider the direction of vector that has greatest magnitude. In this case, the left side (13N) has more magnitude than the right side (7N). Hence:

[tex] \displaystyle{ \sum \vec F = 13 \: \text{N}- 7\: \text{N}= 6 \: \text{N to left}}[/tex]

The vector arrow of net force will point to left side with magnitude of 6 N.

Since the net force is not zero. This means that the force is not balanced as an object still changes its motion from resting to moving. A balanced force would mean the net force is zero and an object will always remain as same condition. This can be referred to first Newton's law of motion.

We can make the force balanced by having both people acting same magnitude of force in opposite direction. The equation must result in:

[tex] \displaystyle{ \left | \vec F \right | = \left| - \vec F \right| }[/tex]

Magnitude of forces must equal for both sides and also have to act in opposite direction which causes net force to be zero:

[tex] \displaystyle{ \sum \vec F = 0}[/tex]

Other Questions
the work function of tungsten is 4.50 ev. determine the maximum speed of the ejected electrons when photons with energy 6.0ev shine on the surface of tungsten How did America respond to the passage of the 13th Amendment?Must require 280 characters. what will your aftertax yield be on a corporate bond that is currently priced to yield 7 percent if you are in the 25 percent tax bracket? Which term describes each of these steps or substeps in the translation process? The ribosomeshifts down to the next codon on the mRNA=____The large and smalt ribosomal subunits, a tRNA carrying methionine and the mRNA transcript combine = _____A stop codon enters the A site on the ribosome =____ The growing peptide carned by the RNA at the site on the ribosome is transfered to the amino acid carried by the tRNA at the A site=____AMANA codon is matched with the RNA with a complementary anti-codon=___ draw the structure of this metabolic intermediate. please draw the intermediate in its ionized form. A fully owned foreign subsidiary is a form of MNC (multinational corporation) in which_____ a) a local entrepreneur buys the firm in its own foreign country. b) the MNC owns and operates the firm by itself. c) the foreign government gives its full cooperation. d) none of these options are true. the official price of gold is used to determine the value of all major currencies in the exchange rate system used for international trade today. T/F ? compute t2(x) at x=0.6 for y=ex and use a calculator to compute the error |ext2(x)| at x=1.5. Before retiring in 2003, Horace Silver was one of hard bop's most innovative: ____ FILL IN THE BLANK Businesses aren't usually able to control the elements of their environment, but they can ____ and _____ to it. janie likes to play with dolls and johnny likes to play with his erector set. this illustrates differences due to: Give a practical interpretation in words of the function1) k(g(t)), where L=k(H) is the length of a steel bar at temperature H and H=g(t) is temperature at time t2) t(f(H)), where t(v) is the time of a trip at velocity v, and v=f(H) is velocity at temperature H--------------------------------------Find a simplified formula for the difference quotient --- (f(x+h)-f(x))/h3) f(x)=x^2 +x4) f(x)=sqrtx5) f(x)= 1/x SEC Charges Siemens AG for Engaging in Worldwide Bribery: Based on this case, multi-national corporations should regard illicit payments to foreign officials as simply another cost of doing business.TrueFalse TRUE OR FALSE a word that is commonly mispronounced is frequently misspelled as well. Two sides of a parallelogram are 73 feet and 85 feet. The measure of the angle between these sides is 12. Find the area of the parallelogram to the nearest square foot If a GPCR lost the capability to release GDP: A. the receptor would be permanently activated. B. the receptor would not be able to be activated. C. the alpha subunit would detach. D. the beta subunit would detach. A round uniform body of radius R, mass M and moment of inertia I rolls down (without slipping) an inclined plane making an angle with the horizontal. Then its acceleration is PQ-18. What is the pH of a 0.400 M sodium formate (NaCHO,) solution? K (HCHO,)-1.8x104 (A) 2.07 (B) 5.33 (C) 8.67 (D) 11.93 Give a teaser about the book 1984 by George Orwell without spoiling the ending. (not a summary of the plot) THANK YOU Which of the following is FALSE regarding Gause's (1934) experiment on competition in Paramecium? A. Competition was strong between these two species because these species overlapped in resource use. B. Results showed that both species were able to co-exist, though one species limited its realized niche. C. When the two species were grown separately, each population exhibited logistic growth. D> When grown together, one species caused the other population to go extinct.