Answer:
8.5 hours
Explanation:
The driver of a car traveling at 21.6 m/s applies the brakes and undergoes a constant deceleration of 1.86 m/s 2 . How many revolutions does each tire make before the car comes to a stop, assuming that the car does not skid and that the tires have radii of 0.35 m
Answer:
each tire made 57.03 revolutions before the car halted
Explanation:
Given that;
Initial Velocity u = 21.6 m/s
final velocity v = 0 m/s
acceleration = - 1.86 m/s²
radii r = 0.35 m
first we calculate distance travelled by the car to stop;
v² - u² = 2as
s = v² - u² / 2a
we substitute
s = (0² - (21.6)² / 2 × (-1.86)
s = (0 - 466.56) / ( - 3.72 )
s = 125.419 m
Now Distance traveled by each tire in 1 revolution = 2πr
i.e 2πr is travelled in 1 revolution
so
n×2πr = 125.419 m
n = 125.419 m / 2πr
n = 125.419 m / 2π(0.35)
n = 125.419 / 0.7π
n = 57.03 revolutions
Therefore, each tire made 57.03 revolutions before the car halted
what are the four intermittent reinforcement schedules in your own words?
A student drives the 105-mi trip back to campus after spring break and travels with an average speed of 53 mi/h for 1 hour and 30 minutes for the first part of the trip. (a) What distance was traveled during this time?
Answer:
79.5 miles.
Explanation:
From the question given above, the following data were obtained:
Average speed = 53 mi/h
Time = 1 hr 30 minutes
Distance travelled =?
Next, we shall convert 1 hr 30 minutes to hours. This can be obtained as follow:
Recall:
1 hr = 60 mins
Therefore,
1 hr 30 mins = 60 + 30 = 90 minutes.
60 mins = 1 hr
Therefore,
90 mins = 90 mins × 1 hr / 60 mins
90 mins = 1.5 hr
Finally, we shall determine the distance travelled during the time. This can be obtained as follow:
Average speed = 53 mi/h
Time = 1.5 hr
Distance travelled =?
Average speed = Distance travelled / time
53 = Distance travelled / 1.5
Cross multiply
Distance travelled = 53 × 1.5
Distance travelled = 79.5 miles
if |v|= 11, |w|= 23, |v-w|= 30, find |v+w|
Answer:
[tex]|v+w|=20[/tex]
Explanation:
We are given that
|v|=11
|w|=23
|v-w|=30
We have to find the value of |v+w|
|a-b|^2=(a+b)\cdot (a+b)=a^2+b^2-2|a||b|cos\theta
Using the formula
[tex](30)^2=(11)^2+(23)^2-2(11)(23)cos\theta[/tex]
[tex]900=121+529-506cos\theta[/tex]
[tex]900-121-529=-506cos\theta[/tex]
[tex]250=-506cos\theta[/tex]
[tex]cos\theta=-\frac{250}{506}[/tex]
[tex]|a+b|^2=|a|^2+|b|^2+2a\cdot bcos\theta[/tex]
Using the formula
[tex]|v+w|^2=(11)^2+(23)^2+2(11)(23)\times (-\frac{250}{506})[/tex]
[tex]|v+w|^2=400[/tex]
[tex]|v+w|^2=(20)^2[/tex]
[tex]|v+w|=20[/tex]
Which would have more kinetic energy a dog walking or the same dog running?
Answer:
dog walking
Explanation:
9. What is the speed of a 25 kg object that has 2500 J of kinetic energy?
Answer:
We conclude that the speed of a 25 kg object that has 2500 J of kinetic energy is 14.14 m/s.
Explanation:
Given
Mass m = 25 kg Kinetic Energy (K.E) = 2500 JTo determine
The speed v = ?
We know that a body can possess energy due to its movement — Kinetic Energy.
The speed with which a body moves can be determined using the formula
[tex]K.E=\frac{1}{2}mv^2[/tex]
[tex]v=\sqrt{\frac{2\times \:K.E}{m}}\:\:\:[/tex]
substituting m = 25 and K.E = 2500 in the formula
[tex]v=\sqrt{\frac{2\times 2500}{25}}[/tex]
[tex]v=\sqrt{\frac{5000}{25}}[/tex]
[tex]v=\sqrt{200}[/tex]
[tex]v=14.14[/tex] m/s
Therefore, we conclude that the speed of a 25 kg object that has 2500 J of kinetic energy is 14.14 m/s.
A crane is used to lower weights into a lake for an underwater construction project. Determine the tension in the cable of the crane due to a concrete sphere with a radius of 2 m when the sphere is lowered into the water. The concrete has a specific gravity of 2.8.
Answer:
Tension in the cable = 591292.8 N or 591.3 kN
Explanation:
Tension in the cable = Weight of object in air - upthrust/bouyancy due to the liquid
Weight of object in air = mass * acceleration due to gravity, g
Since mass is not given, it is obtained from the formula, mass = density * volume
Volume of the sphere = 4/3πr³ where r, radius = 2 m; π = 22/7
volume = 4/3 * 22/7 * (2m)³
volume of sphere = 33.52 m³
Density of concrete sphere = specific gravity * density of water
where, specific gravity = 2.8, density of water = 1000 kg/m³
density of concrete = 2.8 * 1000 kg/m³
density of concrete = 2800 kg/m³
acceleration due to gravity, g = 9.8 m/s²
Thus, weight of concrete = 2800 kg/m³ * 33.52 m³ * 9.8 m/s² = 919788.8 N
Upthrust = density of water * volume of sphere * g
Upthrust = 1000 kg/m³ * 33.52 m³ * 9.8 m/s² = 328496 N
The tension in the cable is the calculated as below;
Tension in the cable = Weight of object in air - upthrust/bouyancy due to the liquid
Tension in cable = 919788.8 N - 328.496 N = 591292.8 N
Therefore, tension in the cable is 591292.8 N or 591.3 kN
Cheetahs can accelerate to a speed of 20.0 m/s in 2.50 s and can continue to accelerate to reach a top speed of 30.0 m/s. Assume the acceleration is constant until the top speed is reached and is zero thereafter. Let the +x-direction point in the direction the cheetah runs. Express the cheetah’s top speed (vtop) in miles per hour (mi/h).
Starting from a crouched position, how much time (t-accel) does it take a cheetah to reach its top speed, and what distance (d) does it travel in that time?
Answer:
The cheetah’s initial velocity is 0 m/s. Let’s use the following equation to determine the acceleration.
Explanation:
Acceleration = (v/t) = (20/2.5) = 8m/sec^2.
1) Time to 29m/sec. = (v/a) = (29/8) = 3.625 secs. (3.6)
Distance covered to top speed = (v^2/2a) = 52.5625 metres (52.6).
2) Distance to run at top speed = (120 - 52.5625) = 67.4375 metres.
Time = (d/v) = (67.4375/29) = 2.325 secs.
Total time to warthog = (2.325 + 3.625) = 5.95 secs.
Cheetah's top speed will be "67.12 mi/h". A complete solution is provided below.
Given that:
Speed,
20.0 m/sTime,
2.50 sAcceleration to top speed,
30.0 m/sNow,
→ Acceleration (a) of cheetah will be:
= [tex]\frac{20}{2.5}[/tex]
= [tex]8 \ m/s^2[/tex]
→ Top speed ([tex]V_{top}[/tex]) of cheetah
= [tex]\frac{30}{1609}\times 3600[/tex]
= [tex]67.12 \ mi/h[/tex]
→ The time required (t) to reach the top speed will be:
= [tex]\frac{30}{8}[/tex]
= [tex]3.75 \ sec[/tex]
and,
→ The distance travelled (d) by cheetah will be:
= [tex]\frac{1}{2}\times 8\times (3.75)^2[/tex]
= [tex]\frac{1}{2}\times 8\times 14.0625[/tex]
= [tex]56.25[/tex]
Learn more:
https://brainly.com/question/13265986
Which statement about personal strength is TRUE?
1. It is inborn and cannot be developed with training or practice.
2. It is something you can acquire with hard work and lots of practice.
3. It is strictly a physical quality, like beauty, or physical ability, like the ability to swim fast.
4. It is such a natural part of a person that they may not even recognize it.
For each scenario below, choose the best graph.
(a) Maria bikes from home to work.
A line graph that plots either speed or distance against time.
Really, the type of graph depends on what quantity you want the graph to show.
Is it possible for the earth to be sucked into a black hole? If so, what would happen?
Answer:
si es posible
Explanation:
ya no existiria la tierra
if possible
the earth would no longer exist.
Answer:
Yes,
Explanation:
We would all die immediatly, its like being stretched and crushed
What is the frequency of this wave
1
2
3
4
Answer: The answer is 2
Explanation:
I got it wrong by picking 3 and the correct option was 2 on edge
A runner completes the 200-meter dash with a time of 19.80 seconds. What was the runner's average speed in miles per hour?
Answer:
v = 22.54 mph.
Explanation:
Given that,
Distance moved, d = 200 m
Time, t = 19.8 s
We need to find the runner's average speed.
We know that,
1 mile = 1609.34 m
200 m = 0.124 miles
19.8 seconds = 0.0055 h
So,
Speed = distance/time
[tex]v=\dfrac{0.124}{0.0055}\\\\v=22.54\ mph[/tex]
So, the runner's average speed is 22.54 mph.
A ball player catches a ball 3.10 s after throwing it vertically upward. a) with what speed did he throw it? b) what height did it reach?
Answer:
speed=30.41, height=94.27
Explanation:
since the motion is vertical upward means the motion is against gravitational force and the initial velocity of the ball was zero.
Sort the following properties as quantitative or qualitative property MASS-DENSITY-VOLUME-MELTING POINT
Answer:
mass, volume: quantitative propereties: extensive properties
volume, melting point: quantitative propereties: intensive properties
Explanation:
The quantitative properties of matter are characteristics of matter that can be measured and of which quantities can be expressed.
Quantitative properties can be divided into 2 groups:
Extensive properties: This is whose value depends on the amount of substance analyzed. They are not properties that allow us to distinguish one substance from another, since its value changes depending on the size of the object or sample that you have. Intensive properties: are those that do not depend on the mass or size of a body. That is, these are properties whose value is independent of the amount of substance analyzed; they are useful for differentiating substances.On the other hand, the qualitative properties of matter are those that cannot be expressed in numerical values or quantities. They are detected, in many cases, through the senses, since they do not measure them.
In this case:
mass, volume: quantitative propereties: extensive propertiesvolume, melting point: quantitative propereties: intensive propertiesAn object is traveling at a velocity of 100 rn/s to the left for about 5 seconds. How far has the object traveled? (What is the distance?)
Answer:
500 rn
Explanation:
A taxi hurries with a constant speed of 60 miles per hour. How long will it take to travel a distance of 130 miles
Answer:
2.17 hrs
Explanation:
time = distance / velocity
We know that distance = 130 miles and velocity = 60 miles/h.
t = d / v
t = 130 miles / 60 miles/h
t = 2.17 hrs
It takes about 2.17 hours to travel a distance of 130 miles. Hope this helps, thank you !!
The surface area of a postage
stamp is 0.00600 m^2, and the air
exerts 1.00 atm of pressure on it.
How much force does it exert on
the stamp?
(Hint: The standard unit for
pressure is Pa.)
(Unit = N)
Answer:
Force = 607.95 Newton
Explanation:
Given the following data;
Area = 0.00600 m^2
Pressure = 1 atm to Pascal = 101325 Pa
To find the force;
Pressure = Force/area
Force = pressure * area
Substituting into the equation, we have;
Force = 101325 * 0.00600
Force = 607.95 Newton.
Therefore, the amount of force exerted by the air on the stamp is 607.95 Newton.
A particle moving in the xy-plane has velocity v⃗ =(2ti^+(3−t2)j^)m/s, where t is in s.
Part A
What is the x component of the particle's acceleration vector at t = 6 s?
Express your answer with the appropriate units.
Part B
What is the y component of the particle's acceleration vector at t = 6 s?
Express your answer with the appropriate units.
Answer:
A) 2 m/s²
B) -12 m/s²
Explanation:
A)
Applying the definition of instantaneous acceleration as the derivative of the velocity with respect to time, the acceleration vector can be expressed as follows:a = 2i^ + (-2t) j^ m/s²So, the x-component of the acceleration vector is constant, and equal to 2m/s², at any time.When t=6 s, aₓ= 2 m/s²B)
Applying the definition of instantaneous acceleration as the derivative of the velocity with respect to time, the acceleration vector can be expressed as follows:a = 2i^ + (-2t) j^ m/s²So, when t= 6s, the y component of a is as follows:ay = -2(6s) = -12 m/s²A) The x-component of the particle's acceleration is; 2 m/s²
B) The y-component of the particle's acceleration at t = 6 is; -12 m/s²
X and Y components of Acceleration
We are given the velocity as;
v^ = 2t i^ + (3 − t²) j^ m/s
A) We know that acceleration is simply a derivative of velocity with respect to time. Thus;
a^ = dv/dt = 2 i^ + (-2t) j^ m/s²
The x - component of the acceleration is the figure attached to the vector i^.
Thus, x-component of acceleration = 2 m/s²
B) The y-component of the acceleration will be the value attached to the vector j^. Thus;
y-component of acceleration = -2t m/s²
At t = 6 s, we have;
y-component of acceleration = -2(6) = -12 m/s²
Read more about x and y components of acceleration at; https://brainly.com/question/7114558
How does energy keep the world going? How is energy conserved?
Answer:
The most notable way that reducing energy helps the environment is by decreasing power plant emissions.
Answer:
Explanation:
The conservation of energy law states that energy cant be created or destroyed, only transferred. Since energy cant be created or destroyed, the amount of energy in the universe is completely constant.
Energy keeps the world "going" because we use it every single day in our life. Everything in the universe uses some sort of energy. We digest food for energy, we use electrical energy for electronics, we convert electrical energy into heat energy for heaters and such, we use solar panels to power our houses. There are countless examples of how energy keeps the world "going."
Anastasia constructed a simple circuit with a battery and a light bulb. She knows that the resistance of the light bulb is 10
2 and that the voltage given to the light bulb is 12 V. What is the current through the light bulb?
Answer:
Simple Single Loop Circuits. J. E σ. = ∆V = IR ... To find the current, use the total voltage and equivalent resistance: S. V ... A circuit contains a 48-V battery and two 240Ω light bulbs.
In a game of ice hockey, you use a hockey stick to hit a puck of mass 0.16 kg that slides on essentially frictionless ice. During the hit you exert a constant horizontal force on the puck that gives it an acceleration of 75 m/s2 for a fraction of a second. During the hit, what is the magnitude of the horizontal force that you exert on the puck
Answer:
12N
Explanation:
given- mass, acelation
Fnet=ma= .16kg*75m/s2
Fnet=12 N only force no friction given.
pls help ;-; this is the question btw
The answer is "Infrared"
Hope this helps
Answer:
x-rays
Explanation:
What recreational drug does an alcopop contain?
An "alcopop" is a term used to describe a flavored alcoholic beverage that typically resembles a soft drink or a fruit juice in appearance and taste. It is also referred to as a "ready-to-drink" (RTD) beverage.
Alcopops are often targeted toward younger consumers and are known for their sweet and fruity flavors, which can mask the taste of alcohol.
The specific recreational drug that an alcopop contains is alcohol itself. Alcohol, or ethanol, is a psychoactive substance that can have intoxicating effects when consumed.
It is considered a recreational drug because of its ability to alter consciousness, impair judgment and coordination, and produce pleasurable or mood-altering effects.
The alcohol content in alcopops can vary, but it is typically lower than in pure spirits or liquors. This is often achieved through dilution with other ingredients, such as carbonated water or fruit juices, to create a milder alcoholic beverage.
Alcopops may also contain additional flavorings, sweeteners, and additives to enhance their taste and appeal.
Know more about alcopop:
https://brainly.com/question/33750456
#SPJ4
At what speed, in m/s, would a moving clock lose 1.3ns in 1.0 day according to experimenters on the ground?
Answer:
v=0.14c
Explanation:
A woman is reported to have fallen 144 ft from the 17th floor of a building, landing on a metal ventilator box that she crushed to a depth of 18.0 in. She suffered only minor injuries. Ignoring air resistance, calculate
A) The speed of the woman just before she collided with the ventilator.
B) Her average acceleration while in contact with the box.
C) Modeling her acceleration as constant, calculate the time interval it took to crush the box.
Answer:
Okay uh gimme some time though
A car traveling 85 km/h is 250 m behind a truck
traveling 73 km/h.
Time needed = t = 20.83 s
Further explanationGiven
car speed = 85 km/h
truck speed = 73 km/h
Required
the time it takes for the car to reach the truck
Solution
When the car reaches the truck, the distance between them will be the same
x car - 250 m = x truck
General formula for distance (d) :
d = v.t
So the equation becomes :
85t-250 = 73t
12t=250
t = 20.83 s
A stunt man jumps from a burning building and comes to
rest at ground level. Consider his impulse during landing if
he lands on a soft mat, on a concrete surface, or in a safety
net. Which of the following is true?
a. His impulse is greatest if he lands on a soft mat.
b. His impulse is greatest if he lands on a concrete
surface.
c. His impulse is greatest if he lands in a safety net.
d. The impulse is the same in all three cases.
e. There is zero impulse in all three cases because he
comes to rest.
Answer:
I think it's E it just sounds right to me tbh
Explanation:
6. A baseball player hits a 0.155-kilogram fastball traveling at -44.0 m/s into center field at a speed of 50.0
m/s. If the impact lasts for 0.00450 second, with what force does he hit the
baseball?
Answer:
3,237.78N
Explanation:
According to Newton's second law of motion
F = mass * acceleration
Since a = v-u/t
F = m(v-u)/t
Given
Mass m = 0.155kg
v = 50.0m/s
u = -44.0m/s
Time t = 0.00450secs
Substitute
F = 0.155(50-(-44))/0.00450
F = 0.155(50+44)/0.00450
F = 0.155(94)/0.00450
F = 14.57/0.00450
F = 3,237.78N
hence he hit the baseball with a force of 3,237.78N
Calculate the change in momentum of a ball has 35 kg mass and it changed its velocity from 3m/s to 6 m/s
please hellllpppppp
Answer:
105 kg.m/s
Explanation:
Formula for change in momentum is given as;
ΔP = m(v - u)
We are given;
Mass; m = 35 kg
Initial velocity; u = 3 m/s
Final velocity; v = 6 m/s
Thus;
ΔP = 35(6 - 3)
ΔP = 35 × 3
ΔP = 105 kg.m/s