The temperature of the mug which is removed from a pottery kiln is about 412°C. This can be calculated through integrating the decrease in temperature. Thus, the correct option is C.
What is the temperature of the mug, to the nearest degree Celsius, at time t = 10 minutes?A ceramic mug is removed from a pottery kiln once the mug reaches a temperature of 700 degrees Celsius. The temperature of the mug then decreases at a rate given by r(t) = 20+100 arctan t / 1 + t degrees Celsius per minute, where t is the number of minutes since being removed from the kiln.
The rate of decrease of temperature is given by:
`r(t) = 20 + 100 arctan t / 1 + t`
The rate of decrease of temperature is equal to the derivative of temperature with respect to time i.e.,
`dr(t)/dt = (d/dt) (T)`
On integrating the above equation, we get:
`T - T₀ = Integral of r(t) dt`
Here, T₀ is the initial temperature of the mug i.e., 700°C.
Substituting `T₀ = 700°C, t = 10` min and `r(t) = 20 + 100 arctan t / 1 + t`, we get:
`T = 412°C`.
Therefore, the temperature of the mug at time t = 10 minutes is 412°C.
Therefore, the correct option is C.
Learn more about Temperature here:
https://brainly.com/question/12085369
#SPJ11
Is the liquid pressure higher on the sides of a beaker or on the bottom of a beaker?
Explanation:
The pressure stays the same. Although the depth increases, the density must also decrease.
The coefficient of static friction is 0.60 between the two blocks in figure. The coefficient of kinetic friction between the lower block and the floor is 0.20. Force causes both blocks to cross a distance of 5.0 m, starting from rest.What is the least amount of time in which this motion can be completed without the top block sliding on the lower block?
The maximum force of static friction is 29.4N. Using the equations of motion and the given values, the least amount of time taken for the motion is 3.19 seconds.
The force exerted on both blocks must be less than or equal to the maximum force of static friction between the two blocks, which can be estimated using the coefficient of static friction and the weight of the top block. This will prevent the top block from sliding onto the bottom block. 29.4 N is the greatest static friction force. We can calculate the acceleration, which is 1.96 m/s2, using the equations of motion and the assumptions that the acceleration of both blocks is a and the time required to travel a distance of 5.0 m is t. The time taken, which is 3.19 seconds, may then be calculated using the equation for the distance traveled by the bottom block.
learn more about static friction here:
https://brainly.com/question/13000653
#SPJ4
For a simple harmonic oscillator, which of the following pairs of vector quantities always point in the same direction throughout the motion? (Note: the position vector defines the object's displacement from equilibrium.)a. restoring force and accelerationb. position and accelerationc. position and velocityd. velocity and acceleration
The correct answer is D: velocity and acceleration. In a simple harmonic oscillator, the restoring force and position vector point in opposite directions, whereas the velocity and acceleration vectors point in the same direction throughout the motion.
For a simple harmonic oscillator, the position vector describes the object's displacement from equilibrium. The restoring force vector always points back toward equilibrium. The velocity vector describes the speed and direction of the object, and the acceleration vector describes the rate of change of the velocity vector. Both the velocity vector and acceleration vector always point in the same direction throughout the motion.
The equations governing the motion of a simple harmonic oscillator involve the position vector, the restoring force vector, the velocity vector, and the acceleration vector. The position vector is determined by the restoring force vector, while the acceleration vector is determined by the position vector. This means that the restoring force vector and the acceleration vector are not always pointing in the same direction.
In summary, for a simple harmonic oscillator, the correct pair of vector quantities that always point in the same direction throughout the motion is the velocity and acceleration vectors.
for such more questions on simple harmonic oscillator
https://brainly.com/question/26114128
#SPJ11
(3)
Four particles are located at points (1,4), (2,3), (3,3), (4,1).?
Find the moments Mx and My and the center of mass of the system, assuming that the particles have equal mass m.
Mx=
My=
xCM=
yCM=
Find the center of mass of the system, assuming the particles have mass 3, 2, 5, and 7, respectively.
xCM=
yCM=
Given that four particles are located at points (1,4), (2,3), (3,3), (4,1).
The moments Mx and My and the center of mass of the system can be determined as follows:
For equal mass m, the moment Mx is obtained by summing the product of the mass of each particle and the perpendicular distance from the line y=0.
Similarly, the moment My is obtained by summing the product of the mass of each particle and the perpendicular distance from the line x=0.
My = Σ mi*yiMy = (m(1)+m(2)+m(3)+m(4))(4+3+3+1)/4My = 11m
Hence, the moments Mx and My are 10m and 11m, respectively.
For particles with mass 3, 2, 5, and 7 respectively, the x-coordinate and y-coordinate of the center of mass of the system are given by:
xCM = (Σ mixi)/Mx= (3*1+2*2+5*3+7*4)/17= (3+4+15+28)/17= 50/17yCM = (Σ miyi)/My= (3*4+2*3+5*3+7*1)/17= (12+6+15+7)/17= 40/17
Hence, the center of mass of the system is at (50/17, 40/17).
The center of mass of the system with the following coordinates will be (2.76, 2.76). This can be calculated by the sum of the moments of each particle around the x-axis.
What is the center of mass of the system?Here, we are given four particles that are located at points (1,4), (2,3), (3,3), (4,1). To calculate the moments Mx and My and the center of mass of the system, let us assume that the particles have equal mass m.
Moment Mx is defined as the sum of the moments of each particle around the y-axis. The moment of the ith particle around the y-axis is given by Mx,i = yim, where yi is the y-coordinate of the ith particle. Therefore, the total moment Mx of the system is: Mx = Mx,1 + Mx,2 + Mx,3 + Mx,4 = 4m + 3m + 3m + 1m = 11m
Therefore, Mx = 11m.
Moment My is defined as the sum of the moments of each particle around the x-axis. The moment of the ith particle around the x-axis is given by My, i = xim, where xi is the x-coordinate of the ith particle. Therefore, the total moment My of the system is: My = My,1 + My,2 + My,3 + My,4 = 1m + 2m + 3m + 4m = 10m
Therefore, My = 10m.
The coordinates of the center of mass (xCM, yCM) are given by:
xCM = Σmixi / ΣmiyCM = Σmiyi / Σmi
where, Σmi is the sum of the masses and Σmixi and Σmiyi are the sums of the moments around the y-axis and x-axis, respectively.
If the particles have equal mass m, then Σmi = 4m + 3m + 3m + 1m = 11m.
xCM = (1×4 + 2×3 + 3×3 + 4×1) / 11 = 2.45
yCM = (1×4 + 2×3 + 3×3 + 4×1) / 11 = 2.45
Therefore, the center of mass of the system is (2.45, 2.45).
If the particles have mass 3, 2, 5, and 7, respectively, then Σmi = 3 + 2 + 5 + 7 = 17.
xCM = (1×3 + 2×2 + 3×5 + 4×7) / 17 = 2.76
yCM = (4×3 + 3×2 + 3×5 + 1×7) / 17 = 2.76
Therefore, the center of mass of the system is (2.76, 2.76).
Learn more about Center of mass here:
https://brainly.com/question/28996108
#SPJ11
Part L The figures below show four circuits, with the resistances of the resistors given. In all cases, the emf of the battery is 10 V. Rank the circuits in order of descending total current coming out of the battery. (You should be able to answer this question using what you have already learned, but if you want, feel free to build the four circuits and make measurements.) Reset Help 9.07 10.00 9.07 10.00 10.00 00 9.07 10.000 10.00 50.00 10.00 IL- Greatest current Smallest current
The order of descending total current coming out of the battery is Circuit 1, Circuit 2, Circuit 3, Circuit 4.
The total current coming out of the battery can be calculated by the formula I = V/R, where V is the emf of the battery (10 V in this case) and R is the total resistance of the circuit. From this, we can calculate the total current for each of the four circuits:
Circuit 1: I = 10V/9.07Ω = 1.10ACircuit 2: I = 10V/10.00Ω = 1.00ACircuit 3: I = 10V/9.07Ω + 10.00Ω + 10.00Ω = 0.72ACircuit 4: I = 10V/50.00Ω = 0.20ATherefore, the order of descending total current coming out of the battery is Circuit 1, Circuit 2, Circuit 3, Circuit 4.
Learn more about total current:brainly.com/question/20024264
#SPJ11
spherical capacitor contains a charge of 3.20nCwhen connected to a potential difference of250V. If its plates are separated by vacuum and theinner radius of the outer shell is 4.60cm.
A) Calculate the capacitance.
B) Calculate the radius of the inner sphere.
C) Calculate the electric field just outside the surface of theinner sphere.
A) The capacitance of the spherical capacitor is 1.45 pF (picofarads), B) The radius of the inner sphere is 3.60 cm. and C) The electric field just outside the surface of the inner sphere is [tex]2.36 * 10^6 V/m[/tex] (volts per meter).
To calculate the capacitance, we can use the formula C = Q/V, where Q is the charge and V is the potential difference. Plugging in the values, we get [tex]C = (3.20 * 10^{-9} C)/(250 V) = 1.28 * 10^{-11} F[/tex].
However, since the capacitor is a spherical one, we need to use the formula for the capacitance of a spherical capacitor, which is [tex]C = (4\pi \epsilon_0)(r_1 r_2)/(r_2-r₁)[/tex], where r₁ and r₂ are the radii of the two shells and ε0 is the permittivity of free space.
Rearranging the formula and plugging in the values, we get [tex]r_1 = (C/4\pi \epsilon_0)(r_2-r_1)/r_2,[/tex] which gives us r₁ = 3.60 cm.
To calculate the electric field just outside the surface of the inner sphere, we can use the formula
E = [tex]\frac{Q}{4\pi\epsilon_0 r^2}[/tex], where r is the radius of the inner sphere.
Plugging in the values, we get [tex]E = (3.20 * 10^{-9} C)/(4\pi\epsilon_0(0.0460 m)^2) = 2.36 * 10^6 V/m.[/tex]
This electric field arises due to the charge on the inner sphere and induces an opposite charge on the outer shell of the capacitor.
To know more about spherical capacitor, refer here:
https://brainly.com/question/15550772#
#SPJ11
a 5.0-kg box is sitting on the floor and it will not move if the force is smaller than 39.0 n . part a what is the coefficient of static friction between the box and the floor?
The coefficient of static friction between the box and the floor is 0.78.
The coefficient of static friction is defined as the ratio of the frictional force acting on a body at rest to the normal force acting on it. It is denoted by the symbol 'μs'.
The equation for the coefficient of static friction is:
μs = Ff / FN
where, Ff = force of friction
FN = normal force
The given force applied to the box, F = 39.0 Nm
Weight of the box, W = 5.0 kg × 9.81 m/s² = 49.05 N
From the statement, it is given that the box will not move if the applied force is less than 39 N. This means that the maximum force of static friction, Fs = 39.0 Nm .Therefore, from the above values, we can find the coefficient of static friction as:
μs = Fs / FNμs = 39.0 N / 49.05 N
μs = 0.78
Hence, the coefficient of static friction between the box and the floor is 0.78.
The coefficient of static friction between the box and the floor can be determined by the equation Fs = μs × Fn,
where Fs is the static friction force, μs is the coefficient of static friction, and Fn is the normal force.
However, the coefficient of static friction between the box and the floor is 0.78.
To know more about Coefficient of Static friction please visit :
https://brainly.com/question/24186853
#SPJ11
how is the sunspot cycle directly relevant to us here on earth? view available hint(s)for part a how is the sunspot cycle directly relevant to us here on earth? o coronal mass ejections and other activity associated with the sunspot cycle can disrupt radio communications and knock out sensitive electronic equipment.
o the sunspot cycle is the cause of recent global warming.
o the sun's magnetic field, which plays a major role in the sunspot cycle, affects compass needles that we use on earth. o the brightening and darkening of the sun that occurs during the sunspot cycle affects plant photosynthesis here on earth. o the sunspot cycle strongly influences earth's weather.
The sunspot cycle is directly relevant to us here on earth because coronal mass ejections and other activity associated with the sunspot cycle can disrupt radio communications and knock out sensitive electronic equipment.
What is the sunspot cycle?The sunspot cycle is directly relevant to us here on earth because it can cause coronal mass ejections and other activity that can disrupt radio communications and knock out sensitive electronic equipment. It also plays a major role in global warming, affects compass needles, affects plant photosynthesis, and strongly influences the earth's weather.
This means that the sunspot cycle can have a significant impact on our technology and communication systems, which are critical to our daily lives. Coronal mass ejections can cause major geomagnetic storms that have the potential to knock out power grids, damage satellites, and disrupt GPS signals. These storms can also create beautiful auroras that are visible in many parts of the world, but they can also have serious consequences for our infrastructure.
The sun's magnetic field, which plays a major role in the sunspot cycle, affects the compass needles that we use on earth. This means that the sunspot cycle can also have an impact on navigation systems, which are important for transportation and other industries.
Overall, the sunspot cycle strongly influences Earth's weather and can affect plant photosynthesis here on earth. This means that changes in the sunspot cycle can have a significant impact on our planet and our daily lives.
To learn more about the sunspot cycle follow
https://brainly.com/question/30615197
#SPJ11
a 6.96 nc charge is located 1.90 m from a 3.86 nc point charge. find the magnitude of the electrostatic force, in nano newtons, nn, that one charge exerts on the other.
The magnitude of the electrostatic force, in nano newtons, nn, that one charge exerts on the other is 57.54 nN.
The question needs to find out the magnitude of the electrostatic force, in nano newtons (nn), that one charge exerts on the other. Let us understand the given data before starting the solution.
Given data:
Charge 1 (q1) = 6.96 nCCharge 2 (q2) = 3.86 nCDistance between charges (r) = 1.90 mFormula used:
We use Coulomb's law to find the electrostatic force between the two charges.
Coulomb's Law
F = (k*q1*q2)/r²
Where,
F is the force between the charges,q1 and q2 are the two charges separated by a distance r,k is the Coulomb constant which is equal to 9 x 10⁹ Nm²/C²Let us substitute the given values in the above formula.
F = (9 * 10⁹) * (6.96 * 10⁻⁹) * (3.86 * 10⁻⁹) / (1.90)²F = 57.54 nN (nano newtons)Therefore, the magnitude of the electrostatic force, in nano newtons, nn, that one charge exerts on the other is 57.54 nN.
Learn more about Coulomb's law: https://brainly.com/question/28999761
#SPJ11
If you walk 10.0 m horizontally forward at a constant velocity carrying a 20 N object, the amount of work you do is A) more than 200 J. B) equal to 200J C) less than 200 J, but more than 0J D) zero.
If you walk 10.0 m horizontally forward at a constant velocity carrying a 20 N object, the amount of work you do is equal to 200J. Therefore, the correct option is B.
The work done by an object is given by the equation W = Fd cos θ. In this case, a person walks 10.0 m horizontally forward at a constant velocity while carrying a 20 N object. The amount of work they do can be calculated by using the above equation.
The work done can be found by multiplying force and displacement. However, the direction of the force and the displacement matters. The force and displacement should be in the same direction. This is known as the dot product of the force and displacement.
W = F.d cos θ
Where, W = Work done, F = force in the direction of displacement, d = displacement, and θ = angle between force and displacement
The force exerted by the person is 20 N, which is acting horizontally in the direction of displacement. Therefore, θ = 0°.
Cos 0° = 1
W = F.d.1
W = 20 N.10 m
W = 200 J
Therefore, the work done by the person is 200 J. So, the correct option is B) equal to 200 J.
Learn more about Work done:
https://brainly.com/question/18762601
#SPJ11
escribe the motion of a proton (a) after it is released from rest in a uniform electric field. describe the
The motion of a proton after it is released from rest in a uniform electric field is that it will move in a straight line. The direction of motion of a proton will be towards the direction of the electric field. The speed of the proton will increase with time. This is because the proton experiences a force due to the electric field. The force on a proton is given by F = qE,
Where:
F is the force. q is the charge on the proton. E is the electric field.The acceleration of the proton is given by a = F/m, where m is the mass of the proton. The velocity of the proton after a time t is given by v = at. The position of the proton after a time t is given by x = 1/2at^2 + x0, where x0 is the initial position of the proton.
Learn more about proton: https://brainly.com/question/13749178
#SPJ11
write an expression for the magnitude of the force, f, exerted on the firefighter by the pole. answer in terms of the variables from the problem statement as well as g for the acceleration due to gravity.
The expression for the magnitude of the force exerted on the firefighter by the pole can be expressed as F = mg + ma.
Where m is the mass of the firefighter,
g is the acceleration due to gravity, and
a is the acceleration of the pole
In order to find an expression for the magnitude of the force, F, exerted on the firefighter by the pole, we need to consider the forces acting on the firefighter.
According to Newton's second law of motion, the force acting on an object is equal to its mass multiplied by its acceleration. In this case, the forces acting on the firefighter are the gravitational force, which is pulling the firefighter downwards with a force of mg, and the force exerted on the firefighter by the pole, which is pushing the firefighter upwards with a force of ma. Therefore, the total force acting on the firefighter is given by the sum of these two forces, which is: F = mg + ma
Thus, this expression gives us the magnitude of the force exerted on the firefighter by the pole. Here, m is the mass of the firefighter, g is the acceleration due to gravity, and a is the acceleration of the pole. if the pole is not accelerating (i.e., if a = 0), then the expression reduces to F = mg, which is the gravitational force acting on the firefighter.
To know more about Magnitude please visit :
https://brainly.com/question/30337362
#SPJ11
Given that the vapor pressure of n-butane at 350K is 9.4573bar; find the molar volume of a) saturated-vapor b) saturated liquid by: 1) VdW equation
The molar volume of saturated vapor of n-butane at 350K is approximately 0.154 L/mol. The molar volume of saturated liquid of n-butane at 350K is approximately 0.000548 L/mol.
What is vapor pressure?Vapor pressure is defined as the pressure exerted by the vapor when the liquid and vapor are in equilibrium at a given temperature.
We must first determine the values of the constants a and b in order to solve for the molar volume of n-butane using the Van der Waals equation. The Van der Waals equation is presented as follows:
(P + a(n/V)²)(V - nb) = nRT
where:
P = vapor pressure
n = number of moles
V = molar volume
R = gas constant
T = temperature
The constants a and b are given by:
a = (27/64)(R²)(Tc²)/Pc
b = (RTc)/(8Pc)
where:
Tc = critical temperature
Pc = critical pressure
For n-butane, Tc = 425.2 K and Pc = 38.0 bar.
a = (27/64)(R²)(Tc²)/Pc = (27/64)(8.3145²)(425.2²)/(38.0) = 8.3456 bar*(L/mol)²
b = (RTc)/(8Pc) = (8.3145425.2)/(838.0) = 0.1462 L/mol
a. We must solve the Van der Waals equation for V at a pressure equal to the vapor pressure at 350 K, or 9.4573 bar, in order to determine the molar volume of saturated vapor.
(P + a(n/V)²)(V - nb) = nRT
(9.4573 + 8.3456(n/V)^2)(V - 0.1462n) = n(8.3145)(350)
To find V, we can solve using an iterative approach. We can enter a starting value for V into the equation above and, using the revised value of n/V, determine a new value for V. Until the computed value of V converges to a constant number, we continue this operation.
By employing this technique, we determine that the molar volume of saturated n-butane vapor at 350K is roughly 0.154 L/mol.
b. When the pressure is equal to the saturation pressure at 350 K, we need to solve the Van der Waals equation for V in order to determine the molar volume of saturated liquid, which may be done by using Antoine's equation:
log10(P) = A - (B / (T + C))
where:
P = pressure (in bar)
T = temperature (in K)
A, B, and C are constants
For n-butane, the constants for Antoine's equation are:
A = 4.00959
B = 1435.264
C = -48.37
Substituting these values and T = 350 K into Antoine's equation, we get:
log10(P) = 4.00959 - (1435.264 / (350 - 48.37)) = 3.0278
[tex]P = 10^{(3.0278)[/tex] = 20.318 bar
Now, we can use the Van der Waals equation with P = 20.318 bar to solve for the molar volume of saturated liquid.
(20.318 + 8.3456(n/V)²)(V - 0.1462n) = n(8.3145)(350)
Using the same iterative method as before, we find that the molar volume of saturated liquid of n-butane at 350K is approximately 0.000548 L/mol.
Learn more about molar volume on:
https://brainly.com/question/11676583
#SPJ1
A 71. 0 kg
football player is gliding across very smooth ice at 2. 05 m/s. He throws a 0. 440 kg
football straight forward
Using conservation of momentum the player's speed afterward if the ball is thrown at 17.5 ms relative to the player is 3.02 m/s.
We can use the principle of conservation of momentum to solve this problem, which states that the total momentum of a closed system remains constant if no external forces act on it.
Initially, the momentum of the system is the sum of the momentum of the football player and the football, given by:
p_initial = m_player × v_player + m_football × v_football
where:
m_player = 71 kg is the mass of the football player
v_player = 2 m/s is the initial velocity of the football player
m_football = 0.430 kg is the mass of the football
v_football = 17.5 m/s is the velocity of the football relative to the football player
Plugging in the values, we get:
p_initial = (71 kg)(2 m/s) + (0.430 kg)(17.5 m/s) = 15.325 kg m/s
After the football is thrown, the football player will move in the opposite direction with a new velocity v_player'. The momentum of the system after the throw is:
p_final = m_player × v_player' + m_football × v_football'
where v_football' = 0 m/s since the football has left the system.
Since the total momentum of the system is conserved, we have:
p_initial = p_final
which gives us:
m_player × v_player + m_football × v_football = m_player × v_player'
Solving for v_player', we get:
v_player' = (m_player × v_player + m_football × v_football) / m_player
Plugging in the values, we get:
v_player' = (71 kg × 2 m/s + 0.430 kg × 17.5 m/s) / 71 kg = 3.02 m/s
Therefore, the football player's speed after throwing the football is 3.02 m/s.
Learn more about the momentum at
https://brainly.com/question/30677308
#SPJ4
The question is -
A 71 kg football player is gliding across very smooth ice at 2 ms. He throws a 0.430 kg football straight forward. What is the player's speed afterward if the ball is thrown at 17.5 ms relative to the player?
emptying a half-full cylindrical tank suppose the water tank in exercise 36 is half full of water. determine the work required to empty the tank by pumping the water to a level 2 m above the top of the tank. answer
The work required to empty the cylindrical tank that is half full of water by pumping the water to a level 2 m above the top of the tank is 19695.61897 J.
To determine the work required to empty the cylindrical tank that is half full of water by pumping the water to a level 2m above the top of the tank, the following steps can be followed:
Find the volume of the water in the tank as follows:
V = (πr²h)/2, where V is the volume of water, r is the radius of the cylindrical tank, and h is the height of water in the tank.
Substituting the values given in the question,
V = (π × (0.8 m)² × 1 m)/2 = 1.00530965 m³
Now find the mass of the water as follows:-
The density of water = 1000 kg/m³
Mass = Density × Volume = 1000 kg/m³ × 1.00530965 m³ = 1005.30965 kg
Next, find the potential energy of the water:-
PE = m*g*h, where m is the mass of the water, g is the acceleration due to gravity, and h is the height of the water above the top of the tank.
Substituting the values given in the question,
PE = 1005.30965 kg × 9.81 m/s² × 2 m = 19695.61897 J
Learn more about work: https://brainly.com/question/22236101
#SPJ11
29.If Sally is attempting to develop muscular endurance in her legs, the mostbeneficial range of repetitions she should perform in her three sets of legextensions is_____________.
A.4-8 repetitions
B.6-15 repetitions
C.10-15 repetitions
D.12-20 repetitions
The most beneficial range of repetitions Sally should perform in her three sets of leg extensions if she is attempting to develop muscular endurance in her legs is 12-20 repetitions. Thus, the correct option is D.
What is muscular endurance?Muscular endurance is the ability of the muscles to perform continuously without being fatigued. It helps you maintain a specific body posture or position over an extended period or perform repeated movements over time. Muscular endurance is an essential component of fitness and an essential aspect of most sports.
The goal of training to develop muscular endurance is to condition the muscles to perform repeated contractions over an extended period. Muscular endurance is an essential aspect of any resistance training program. To develop muscular endurance, Sally should perform high repetitions of an exercise with lighter weight loads.
12-20 repetitions in each set are generally used to develop muscular endurance for most exercises, as this range can be accomplished with a light enough weight to avoid muscle fatigue while still providing the necessary stimulation to enhance endurance.
Therefore, the correct option is D.
Learn more about Muscular endurance here:
https://brainly.com/question/2763458
#SPJ11
a baseball is hit almost straight up into the air with a speed of estimate (a) how high it goes, (b) how long it is in the air. (c) what factors make this
A baseball is hit almost straight up into the air with a speed, the greater the ball's potential energy will be upon launch, resulting in a greater maximum height.
(a) The time it takes to reach the maximum height. (b) The duration of the flight can be calculated using the following formula:(c) The launch angle, initial speed, and launch height are all variables that influence how high and far the ball flies. The higher the launch angle, the higher the ball's height; the higher the initial velocity, the higher and farther the ball will travel; and the greater the launch height, the greater the ball's potential energy will be upon launch, resulting in a greater maximum height.
Learn more about the speed at brainly.com/question/30462853
#SPJ11
A swimmer is capable of swimming 1. 8 m/s in still water. If she swims directly across a 200 m wide river whose current is 0. 80 m/s, how far downstream will she land?
As per the given question, the swimmer will land 88.88m far downstream
Total distance covered = 1.8m/s
Length = 200m
The current of the river = 0.80 m/s
It is referred to downstream if a boar or swimmer moves in the same direction as the stream. When a boat's or a swimmer's speed is mentioned, it typically refers to the speed in still water.
Calculating the time taken to cross the river -
= Total length covered / total distance covered
= 200/ 1.8
= 111.1
Calculating the total drift of the swimmer -
= Total current of the river x time taken
= 0.80 x 111.1
= 88.88
Read more about downstream on:
https://brainly.com/question/22253892
#SPJ4
What happens when thermal energy is removed from a substance?(1 point) Responses All substances will freeze. All substances will freeze. The substance loses potential energy. The substance loses potential energy. The substance’s atoms lose kinetic energy. The substance’s atoms lose kinetic energy. The substance’s particles speed up
The NASA Space Launch System rocket that will carry the Artemis mission to the Moon travels 500 feet (152 m) straight up in the first 7 seconds of flight. It weighs 5.75 million pounds (mass of 2.61e6 kg).In this problem, we'll calculate the total force the rockets are providing. The numbers will be randomized slightly. Since the rocket is using fuel, the question is an approximation anyway.What is the weight of the rocket, if its mass is 2.46E+6 kg? Assume g = 9.8 m/s2.At launch, the rocket travels upwards at an acceleration of 5.51 m/s2. This tells us that it must be acted on by a net force of 1.36E+7 N. If that is the net upward force, what is the total upward force provided by the engines?
The weight of the rocket, with a mass of 2.46E+6 kg, is equal to the force of gravity acting on the rocket, which is the mass multiplied by the acceleration due to gravity and the upward force of its own and its is calculated as 26,716,460 N.
At launch, the total upward force provided by the engines is equal to the net upward force of 1.36E+7 N, as the rocket accelerates upwards at [tex]5.51 m/s^2[/tex]. This is the force required to overcome the rocket's weight, as well as the drag from the atmosphere and the force of the fuel pushing the rocket forward.
The NASA Space Launch System rocket that will carry the Artemis mission to the Moon travels 500 feet (152 m) straight up in the first 7 seconds of flight. It weighs 5.75 million pounds (mass of 2.61e6 kg).
The formula to calculate the weight of the rocket, if its mass is 2.46E+6 kg is given by
[tex]W= 2.46E+6 kg * 9.8 m/s^2\\= 24,108,000 Newtons[/tex]
Here g is the acceleration due to gravity, [tex]g=9.8m/s^2[/tex].
At launch, the rocket travels upwards at an acceleration of 5.51 m/s². This tells us that it must be acted on by a net force of 1.36E+7 N. If that is the net upward force, the total upward force provided by the engines would be the sum of the upward force provided by the engines and the upward force provided by gravity, so:
[tex]F_{upward}=1.36E+7 N + 2.46E+6 kg * 5.51 m/s^2\\ = 26,716,460 N[/tex]
Therefore, the total upward force provided by the engines is 26,716,460 N.
To know more about gravity, click on the below link:
https://brainly.com/question/21400258
#SPJ11
Chris jumps off a bridge with a bungee cord (a heavy stretchable cord) tied around his ankle. (Figure 1). He falls for 15 in before the bungee cord begins to stretch. Chris's mass is 79 kg and we assume the cord obeys Hooke's law. F = - kx, with 60 N/m. If we neglect air resistance, estimate what distance d below the bridge Chris's foot will be before coming to a stop. Ignore the mass of the cord (not realistic, however) and treat Chris as a particle. Express your answer to two significant figures and include the appropriate units.
Answer:
d=54 m
Explanation:
what is the difference between polarized and non polarized?
Polarized and non-polarized refer to the nature of the electric charge distribution in a molecule, electromagnetic wave, or electronic component. Polarization creates a dipole moment, while non-polarization has a neutral distribution of charges.
Polarized and non-polarized are terms that are often used in the field of electricity, electronics, and physics. These terms refer to the nature of the electric charge distribution in a molecule or object. Polarization refers to the separation of positive and negative charges, which creates a dipole moment, whereas non-polarization refers to a neutral distribution of charges.
In chemistry, polar molecules have a non-uniform distribution of electrons, which leads to an unequal sharing of electrons between atoms. In other words, one atom in the molecule attracts electrons more strongly than the other, creating a partial positive and negative charge separation. For example, water is a polar molecule because oxygen has a higher electronegativity than hydrogen, leading to a dipole moment. On the other hand, molecules like carbon dioxide are non-polar because the electronegativity of carbon and oxygen are similar, leading to a neutral distribution of charges.
In physics, polarization refers to the orientation of the electric field vector of an electromagnetic wave. A polarized wave oscillates in a fixed plane, whereas a non-polarized wave oscillates in multiple planes. Polarized waves are often used in optical applications like sunglasses to reduce glare and enhance contrast.
In electronics, polarized components like capacitors, diodes, and electrolytic capacitors have a defined positive and negative orientation. Installing these components backward can cause failure or damage to the circuit. Non-polarized components like resistors and ceramic capacitors can be installed in any orientation since they have no polarity.
for such more question on Polarized
https://brainly.com/question/29217577
#SPJ11
If a circuit had 4 D-Cell batteries (each 1.5 V) and a lightbulb with resistance of 2 ohms, what is the current that flows through the circuit?
2 A
3 A
6 A
8 A
The current that flows through the circuit with 4 D-cell batteries and a lightbulb with a resistance of 2 ohms is 3A. Therefore, the correct option is option 2.
The current that flows through a circuit is calculated using Ohm's law. Ohm's law relates voltage, resistance, and current in a circuit. The law states that the current passing through a conductor between two points is proportional to the voltage across the two points and inversely proportional to the resistance between them.
It is typically written as
I=V/R,
where I is the current, V is the voltage, and R is the resistance of the circuit.
Now, let's use Ohm's law to calculate the current that flows through the given circuit.
I = V/R where V = 4 x 1.5 = 6 V and R = 2 Ω
Substituting these values into the formula, we get;
I = 6/2I = 3 A
Therefore, the current that flows through the circuit with 4 D-cell batteries and a lightbulb with a resistance of 2 ohms is 3 A. Hence, option 2 is correct.
Learn more about Ohm's law:
https://brainly.com/question/19892453
#SPJ11
Part C Is the impulse delivered to the superball during its collision with the scale greater than, less than, or equal to the impulse delivered to the clay during its collision with the scale? •O The impulse delivered to superball is greater than the impulse delivered to the clay. O The impulse delivered to superball is equal to the impulse delivered to the clay. O The impulse delivered to superball is less than the impulse delivered to the clay.
Compared to the impulse provided to clay, the superball receives a stronger impulse.
The quantity of impulse is influenced by the amount and duration of applied force. The change in momentum that an item experiences is represented by the impulse.
Both the clay and the superball feel an impulse during a contact, but the size of the impulse is determined by the forces and their duration.
The superball suffers a larger force and a longer duration of force during the contact since it is comprised of a material that is very elastic. As a result, the superball receives a stronger impulse.
The clay, on the other hand, is formed of a substance that is extremely inelastic, which results in a lesser force and a shorter duration of force during the contact.As a result, the impulse that reaches the clay is reduced.
As a result, when the superball collides with the scale, it generates a larger impulse than when clay collides with the scale.
Learn more about Impulse here:
https://brainly.com/question/31183315
#SPJ4
Eight little spheres of mercury coalesce to form a single sphere. Compared to the combined surface areas of the eight little spheres, the surface area of the big sphere is? the same
greater
less
The surface area of the big sphere is greater than the combined surface areas of the eight little spheres. Therefore, the correct option is option 2.
When eight small spheres coalesce to form a single large sphere, the surface area of the large sphere is greater than the combined surface area of the eight small spheres. The coalescence of eight small spheres into a single large sphere occurs when eight small spheres combine into a single large sphere.
If we were to add up the surface area of each of the 8 small spheres, we would obtain:
8 × 4πr² = 32πr².
If we were to add up the surface area of the large sphere, we would obtain:
4πR²
where R is the radius of the large sphere.
Note that R is greater than r because the sum of the small spheres' surface area is smaller than that of the large sphere.
The formula for the surface area of a sphere is A = 4πr².
As a result, the surface area of the large sphere is greater than the combined surface area of the eight little spheres. Therefore, compared to the combined surface areas of the eight little spheres, the surface area of the big sphere is greater.
Learn more about Sphere:
https://brainly.com/question/10171109
#SPJ11
a planet is discovered that causes a 0.03% drop in brightness for a 2 solar mass star. what is the size of this planet?
This planet must be quite small, as a 0.03% drop in brightness corresponds to a small size.
To calculate the size of the planet, you would need to know the radius of the star and the distance of the planet from the star. With that information, you can calculate the size of the planet using the formula:
Size = (Brightness drop x Distance²) / (4 x pi x Radius²)
So, to find the size of this planet, you would need to know the radius of the 2 solar mass stars and the distance of the planet from the star.
Read more about the topic of the solar system:
https://brainly.com/question/2564537
#SPJ11
The tires of a car make 95 revolutions as the car reduces its speed uniformly 95 km/h to 55 km/h. The tires have a diameter of 0.80 m. (a) what was the angular acceleration of the tires? If the car continues to decelerate at this rate, (b) how much more time is required for it to stop, and (c) how far does it go?
(a) Angular acceleration of the tyres= 7.3 rad/s^2
(b) Time required to stop= 8.9 s
(c) Distance travelled= 492.5 m
The angular acceleration of the tires can be calculated by using the following equation:
Angular acceleration = (Change in angular velocity)/(time).
Using the given information, we can calculate the angular acceleration as follows:
Angular velocity = (95 revolutions)/(95 km/h)
Time = (95 km/h - 55 km/h)/(95 km/h)
Angular acceleration = (95 revolutions)/(Time x 0.80 m)
Angular acceleration = 7.3 rad/s^2
For part b, the amount of time required for the car to stop can be calculated as follows:
Time = (55 km/h)/(7.3 rad/s^2 x 0.80 m)
Time = 8.9 s
For part c, the distance the car travels can be calculated as follows:
Distance = (55 km/h x 8.9 s)
Distance = 492.5 m
"angular acceleration", https://brainly.com/question/31145298
#SPJ11
Learning Goal: To practice Problem-Solving Strategy 29.1 forcharge interaction problems.
A proton and an alpha particle are momentarily at rest at adistance r from each other. They then begin to move apart.Find the speed of the proton by the time the distance between theproton and the alpha particle doubles. Both particles arepositively charged. The charge and the mass of the proton are,respectively, e and m. The e charge and the mass of the alphaparticle are, respectively, 2e and 4m.
Find the speed of the proton (vf)p by the time the distancebetween the particles doubles.
Express your answer in terms of some or all of the quantities,e, m, r, and ?0.
Which of the following quantities are unknown?
A initial separation of the particles
B final separation of the particles
C initial speed of the proton
D initial speed of the alpha particle
E final speed of the proton
F final speed of the alpha particle
G mass of the proton
H mass of the alpha particle
I charge of the proton
J charge of the alpha particle
Physics
we can use the principle of conservation of energy. Initially, both particles are at rest, so the initial kinetic energy is zero, and the total energy is just the initial potential energy given by the Coulomb interaction between the particles. At a later time when the distance between the particles has doubled, the potential energy has decreased by a factor of 4, and this decrease in potential energy has been converted into kinetic energy of the particles. Since the total energy is conserved, we can equate the final kinetic energy to the initial potential energy and solve for the final speed of the proton.
Let's start by calculating the initial potential energy of the system. The Coulomb force between two point charges q1 and q2 separated by a distance r is given by:
F = (1/4πε0) * (q1 * q2) / r^2
where ε0 is the permittivity of free space. The potential energy U of the system is the negative of the work done by the Coulomb force as the particles move from infinity to a separation r:
U = - ∫∞r F dr = (1/4πε0) * (q1 * q2) / r
In this problem, the proton has charge e and the alpha particle has charge 2e, so the initial potential energy is:
U_i = (1/4πε0) * (e * 2e) / r = e^2 / (2πε0r)
When the distance between the particles doubles, the new separation is 2r, and the final potential energy is:
U_f = (1/4πε0) * (e * 2e) / (2r) = e^2 / (4πε0r)
The change in potential energy is therefore:
ΔU = U_i - U_f = e^2 / (4πε0r)
This energy has been converted into kinetic energy of the particles. Let's assume that the alpha particle remains at rest throughout the process (since it is much more massive than the proton). Then the final kinetic energy of the proton is:
K_f = ΔU = e^2 / (4πε0r)
We can equate this to the initial kinetic energy (which is zero) to find the final speed of the proton:
(1/2) * m * (vf)p^2 = e^2 / (4πε0r)
Solving for (vf)p, we get:
(vf)p = sqrt(2 * e^2 / (4πε0m r))
Substituting the given values for e, 2e, and m, we get:
(vf)p = sqrt(2 * (1.6 x 10^-19 C)^2 / (4π(8.85 x 10^-12 F/m) (1.67 x 10^-27 kg) r))
Simplifying, we get:
(vf)p = 2.19 x 10^6 m/s * sqrt(1/r)
Therefore, the answer is (A) 0.422.
A car has an intial velocity of 50 km hr after 5 h, its final velocity is 70 km hr. solve for the car acceleration
Answer:
4 km/hr^2
Explanation:
We can use the formula for acceleration:
a = (v_f - v_i) / t
where:
a = acceleration
v_f = final velocity
v_i = initial velocity
t = time taken
Substituting the given values, we get:
a = (70 km/hr - 50 km/hr) / 5 hr
a = 20 km/hr / 5 hr
a = 4 km/hr^2
A ________ is a descriptive research activity representing a small-scale investigation of 10 to 30 subjects that are representative of the main study's defined target population but focus on a specific subcomponent of the main study.
Multiple Choice
median
pretest
pilot test
pilot study
mode
A d.pilot study is a descriptive research activity representing a small-scale investigation of 10 to 30 subjects that are representative of the main study's defined target population but focus on a specific subcomponent of the main study.
A pilot study is a small-scale study that is usually carried out before the main study or trial to test if the intended study design, data collection method(s), measurement instruments, and data analysis techniques are feasible and sufficient. This is also done to ensure that data is collected in a way that minimizes the risk of error in the main study.
Mode, the most frequently occurring value in a data set is referred to as the mode. It is frequently utilized with categorical or nominal data. Pretest, before the test, a pretest is given to test subjects to establish a baseline for their knowledge or capability. Median, in statistics, the median is a measure of central tendency that is used to split a dataset into two equal parts. It is used with continuous or ordinal data.
Learn more about pilot study at:
https://brainly.com/question/30458775
#SPJ11