\A cone is inverted and filled with water to 3/4 of its height. What percent of the cone's volume is filled with water

The weighted average of doors sold will be given by,

Weighted Average = Sum of Weighted terms/ Total number of terms.

Given,

Weighted average of doors sold in last one week.

One week = 7 days

Now,

Weighted average means it assigns certain weights to each of the individual quantities, helpful in arriving at result when there are many factors to consider and evaluate.

Weighted average = ∑( Weights× Quantities ) / ∑( Weights )

Hence,

In this way the home improvement company can calculate the weighted average of the doors sold in the last one week.

Learn more about Weighted average,

https://brainly.com/question/28561354

#SPJ1

To find two sets of polar coordinates for a point in the given rectangular coordinates (0, 2], we can use the formulas for converting rectangular coordinates to polar coordinates.

For the set of coordinates with r > 0, we can use the formula r = √(x^2 + y^2) and θ = atan2(y, x). In this case, since the point lies on the positive y-axis, the rectangular coordinates become (0, 2), and the polar coordinates will be (2, π/2).

For the set of coordinates with r < 0, we can use the same formulas, but multiply r by -1. In this case, the polar coordinates will be (-2, π/2 + π) = (-2, 3π/2).

Therefore, the two sets of polar coordinates for the point in (0, 2] are (2, π/2) and (-2, 3π/2). The first set corresponds to a positive distance from the origin, while the second set corresponds to a negative distance from the origin, indicating a point in the opposite direction.

Learn more about polar coordinates here: brainly.com/question/32386549

#SPJ11

The system of equations in the graph is:

y = 2x + 3

y = (-0.5)*x - 3

Here we have a system of equations where we need to find the slopes of the two lines.

The system can be written as:

y = _x + 3

y = _x - 3

To find the slopes we can just use the given graph.

For the one with y-intercept at 3, we will get that for an increase of 1 unit in x, there is an increase of 2 units in y, then we have:

y = 2x + 3

And for the second line we can see that for an increase in x of 2 unit, there is a decrease of 1 unit in y, then:

y = (-0.5)*x - 3

The system is:

y = 2x + 3

y = (-0.5)*x - 3

Learn more about system of equations:

https://brainly.com/question/13729904

#SPJ1

Since the angle of incidence is the angle between the incident ray and the normal to the surface, and the surface is a triangular prism with an unknown angle, we cannot determine the angle of incidence with the given information.

We would need to know the orientation of the triangular prism and the specific face on which the light ray is incident.

To know more about light ray refer here:

https://brainly.com/question/13851007

#SPJ11

Mean ozone refers to the average concentration of ozone in the lower atmosphere during the time period of 13:00 to 15:00 hours at Roosevelt Island. Ozone is a pollutant that can have harmful health effects. The lower atmosphere refers to the part of the atmosphere closest to the Earth's surface.

a. When plotting histograms of ozone and temperature using SAS, the features that are seen depend on the data. The variables may or may not have roughly normal distributions.

b. When making a scatterplot with temperature on the x-axis and ozone on the y-axis, the relationship between the two variables can be described as potentially linear. There may be interesting features in the scatterplot such as clusters of data points or outliers.

c. Linear regression may not be the best choice for these data as there may be other factors that influence the relationship between temperature and ozone that are not captured by a linear model. The error terms for different days may also be correlated with each other due to common environmental factors.

d. If a linear regression is fit to the data regardless of concerns from part c, the estimates of the slope and intercept terms will give information about the relationship between temperature and ozone. The slope represents the change in ozone concentration for each degree increase in temperature, while the intercept represents the ozone concentration when the temperature is 0 degrees Fahrenheit.

Learn more about Mean ozone here:

https://brainly.com/question/31239025

#SPJ11

The expected value of X is 12. The random variable x is known to be uniformly distributed between 3 and 13.

If the random variable X is uniformly distributed between 3 and 13, then the probability density function f(x) of X is given by:

f(x) = 1 / (13 - 3) = 1/10, for 3 <= x <= 13

The expected value of X, denoted E(X), is defined as:

E(X) = ∫[from 3 to 13] x f(x) dx

Using the probability density function, we can rewrite this as:

E(X) = ∫[from 3 to 13] x (1/10) dx

Integrating with respect to x, we get:

E(X) = [(1/10) * x^2 / 2] [from 3 to 13]

E(X) = (1/10) * [(13^2 - 3^2) / 2]

E(X) = (1/10) * 120

E(X) = 12

Therefore, the expected value of X is 12.

Learn more about uniformly distributed here

https://brainly.com/question/31384725

#SPJ11

So the results related to sets are:

E ∪ F = {d, f, q, z}

E ∩ F = {d}

Eᶜ = {k, q, v, z}

Eᶜ ∩ F = {q, z}

E ∪ Fᶜ = {f}

(E ∩ F)ᶜ= {f, k, q, v, z}

Given the sets are:

Sample space of an experiment (S) = {d, f, k, q, v, z}

An event E = {d, f}

and event F = {d, q, z}

Now, calculating the other operations on events

(i) E ∪ F [This suggests the set of all elements E and F have in combine]

= {d, f} ∪ {d, q, z}

= {d, f, q, z}

(ii) E ∩ F [This means the set of common elements of E and F]

= {d, f} ∩ {d, q, z}

= {d}

(iii) Eᶜ

= S - E [This suggests the set of elements which S has but E does not]

= {d, f, k, q, v, z} - {d, f}

= {k, q, v, z}

(iv) Eᶜ ∩ F

= {k, q, v, z} ∩ {d, q, z}

= {q, z}

(v) E ∪ Fᶜ

= E ∪ [S - F]

= E ∪ [{d, f, k, q, v, z} - {d, q, z}]

= E ∪ {f, k, v}

= {d, f} ∪ {f, k, v}

= {f}

(vi) (E ∩ F)ᶜ

= S - (E ∩ F)

= {d, f, k, q, v, z} - {d}

= {f, k, q, v, z}

To know more about sets here

https://brainly.com/question/17173629

#SPJ4

The fractions less than the given fractions are as follows:

Less than 3/6: 1/2, 1/3             Less than 2/3: 1/2         Less than 3/8: 1/2, 1/3                Less than 1/2: None               Less than 3/3: 1/2, 1/3      Less than 2/6: 1/3

To determine which fractions are less than the given fractions, we can simplify each fraction and compare them. Let's simplify the fractions:

Simplifying 3/6:

The numerator and denominator share a common factor of 3. Dividing both by 3, we get 1/2.

Simplifying 2/3:

The fraction 2/3 is already in its simplest form.

Simplifying 3/8:

The fraction 3/8 is already in its simplest form.

Simplifying 1/2:

The fraction 1/2 is already in its simplest form.

Simplifying 3/3:

The numerator and denominator are the same, so the fraction is equal to 1.

Simplifying 2/6:

The numerator and denominator share a common factor of 2. Dividing both by 2, we get 1/3.

Now, let's compare each fraction to the given fractions:

Fractions less than 3/6:

The fractions less than 3/6 are 1/2 and 1/3.

Fractions less than 2/3:

The fraction less than 2/3 is 1/2.

Fractions less than 3/8:

The fractions less than 3/8 are 1/2 and 1/3.

Fractions less than 1/2:

There are no fractions less than 1/2 because it is already the smallest fraction (excluding negative fractions).

Fractions less than 3/3:

The fractions less than 3/3 are 1/2 and 1/3.

Fractions less than 2/6:

The fraction less than 2/6 is 1/3.

So, the fractions less than the given fractions are as follows:

Less than 3/6: 1/2, 1/3

Less than 2/3: 1/2

Less than 3/8: 1/2, 1/3

Less than 1/2: None

Less than 3/3: 1/2, 1/3

Less than 2/6: 1/3

Learn more about fraction here:

https://brainly.com/question/10354322

#SPJ11

The correct option is D) 3/2. Given that the equation 3x + 2y = 0 represents a proportional relationship, we need to find the constant of proportionality.

Constant of proportionality is defined as the ratio between two proportional quantities. To determine the constant of proportionality in the equation 3x - 2y = 0, we need to rearrange the equation to the form y = kx, where k represents the constant of proportionality.

Starting with the given equation:

3x - 2y = 0

Let's isolate y:

2y = 3x

Divide both sides by 2:

y = (3/2)x

Comparing this equation with the form y = kx, we can see that the constant of proportionality (k) is (3/2).

Therefore, the constant of proportionality in the equation 3x - 2y = 0 is (3/2), and

to know more about constant visit :

https://brainly.com/question/31730278

#SPJ11

The dimensions of the cuboid are 4cm, (x+1)cm, and (x+11)cm, with a volume of [tex]924cm^3[/tex].

To find the value of 'x' and determine the dimensions of the cuboid, we can use the formula for the volume of a cuboid, which is given by V = lwh, where V represents the volume, l is the length, w is the width, and h is the height.

In this case, we are given that the volume is [tex]924cm^3[/tex]. We can substitute the given dimensions into the formula and solve for 'x'.

So, the equation becomes:

924 = 4(x + 1)(x + 11)

Expanding and simplifying the equation, we have:

[tex]924 = 4(x^2 + 12x + x + 11)\\924 = 4(x^2 + 13x + 11)[/tex]

Rearranging the equation, we get:

[tex]x^2 + 13x + 11 = 924/4\\x^2 + 13x + 11 = 231\\x^2 + 13x + 11 - 231 = 0\\x^2 + 13x - 220 = 0[/tex]

Now we can solve this quadratic equation using factoring, completing the square, or the quadratic formula. Once we find the value of 'x', we can substitute it back into the dimensions of the cuboid, which are 4cm, (x+1)cm, and (x+11)cm, to determine the actual dimensions.

Learn more about dimensions here:

https://brainly.com/question/31106945

#SPJ11

Answer:

Step-by-step explanation:

4×(x+1)×(x+11)=924  ----- times all 3 sides together, we re told what that equals

(x+1)(x+11)=x²+12x+11 ------ expand the brackets

4×(x²+12x+11)=4x²+48x+44 ------  times it by 4

4x²+48x+44=924cm³ ------  make it equal what we are told (924)

x²+12x+11=231  ------ all divisble by 4

x²+12x-220=0  -------- make the equation =0

(x-10)(x+22)  ------ factorise

x=10,x=-22    ------ solve for x

4cm,11cm,21cm   ----  you have the 3 dimensions

You can't have a minus of a side so therfore the correct answer is x=10

We were told that the sides equal (x+1) - 10+1=11cm

(x+11) - 10+11=21cm

Answer:

A. Unfavorable variance.

Step-by-step explanation:

A. Unfavorable variance.

To know more about  Unfavorable variance refer here

https://brainly.com/question/24064163#

#SPJ11

The point where ∅ intersects the unit Circle is approximately (-0.759, 0.651).

a. To determine the quadrant in which the angle ∅ = 8/3 radians belongs, we can first convert the angle into degrees by multiplying it by 180/π.
∅ = (8/3) * (180/π) ≈ 152.73 degrees.
Since 152.73 degrees lies between 90 and 180 degrees, the angle ∅ belongs to the 2nd quadrant. So, the numerical value is 2.
b. The reference angle for ∅ is the acute angle formed between the terminal side of the angle and the x-axis. Since ∅ is in the 2nd quadrant, we can find the reference angle by subtracting the angle from 180 degrees.
Reference angle = 180 - 152.73 ≈ 27.27 degrees.
To convert it back to radians, multiply by π/180:
Reference angle = (27.27) * (π/180) ≈ 0.476 radians.
c. To find the point where ∅ intersects the unit circle, we can use the trigonometric functions sine and cosine.
For a unit circle with radius 1, the coordinates (x, y) are given by:
x = cos(∅) and y = sin(∅).
So, using ∅ = 8/3 radians:
x = cos(8/3) ≈ -0.759
y = sin(8/3) ≈ 0.651
Therefore, the point where ∅ intersects the unit circle is approximately (-0.759, 0.651).

To know more about Circle .

https://brainly.com/question/30557046

#SPJ11

The cosine of π/3 is 1/2 and the sine of π/3 is √3/2. So the point where 0 intersects the unit circle is (cos(8/3π), sin(8/3π)) = (1/2, -√3/2).

a. The angle 0 = 8/3π is in the second quadrant because it lies between π and 3π/2.

b. The reference angle for 0 in radians is π/3 because 0 is 8/3π which is greater than 2π and less than 3π.

c. To find the point where 0 intersects the unit circle, we need to find the cosine and sine values of π/3. Since π/3 is a common angle, we can use the special triangles to determine its cosine and sine values. In the 30-60-90 triangle, the side opposite the 60 degree angle is √3 times the length of the shorter leg.

Know more about circle here;

https://brainly.com/question/29142813

#SPJ11

The figure in the graph has a total area of 40 square units

From the question, we have the following parameters that can be used in our computation:

The figure

Where, we have

Triangles = 4

Rectangles = 1

The total area of the triangle is calculated as

Area = bh/2

So, we have

Area = 4 * (√2 * 2√2)/2

Evaluate

Area = 8

The total area of the rectangle is

Area = bh

So, we have

Area = 4√2 * 4√2

Evaluate

Area = 32

The total areas of the shape is calculated as

Area = triangle + rectangle

So, we have

Area = 8 + 32

Evaluate

Area = 40

Read more about area at

https://brainly.com/question/25292087

#SPJ1

False. Regression lines are not a collection of mean values of y for different values of x. They represent the best-fit line that minimizes the sum of the squared differences between the observed y-values and the predicted y-values.

To know more about  regression lines  refer here

https://brainly.com/question/765640

SPJ11

The general formula for the nth term of the sequence is (-1)^(n+1) * n^2 / (n+5).

Let's observe the pattern in the given sequence:

The numerator of the first term is 1, and the denominator is 6, so the first term is 1/6.

The numerator of the second term is -4, and the denominator is 13, so the second term is -4/13.

The numerator of the third term is 9, and the denominator is 20, so the third term is 9/20.

The numerator of the fourth term is -16, and the denominator is 27, so the fourth term is -16/27.

It looks like the numerator of each term is (-1)^(n+1) times n^2, and the denominator of each term is n+5.

So the nth term is:

an = (-1)^(n+1) * n^2 / (n+5)

Therefore, the general formula for the nth term of the sequence is (-1)^(n+1) * n^2 / (n+5).

To know more about sequence refer here:

https://brainly.com/question/30262438

#SPJ11

we need to find the probability density function (pdf) of U = Z^2, where Z is a standard normal random variable. Then we need to show that U follows a gamma distribution with parameters a = λ = 1/2 and find the value of г(1/2) which is √π.

(1) To find the pdf of U, we can use the transformation method. Let g(x) be the pdf of Z. Then, we can write U = Z^2 and solve for Z to get Z = ± √U. Taking the positive root, we have Z = √U. Now, using the change of variables formula, we can write the pdf of U as fU(u) = fZ(√u) * (du/dz), where du/dz = 2z (since Z = √U). Therefore, fU(u) = (1/√(2π)) * e^(-(√u)^2/2) * (1/(2√u)), which simplifies to fU(u) = u^(-1/2) * (1/√(2π)) * e^(-u/2).

(2) To show that U follows a gamma distribution with parameters a = λ = 1/2, we can use the fact that the pdf of a gamma distribution with these parameters is fU(u) = (1/(Γ(1/2))) * u^(1/2 - 1) * e^(-u/2). Comparing this with the pdf we obtained in part (1), we see that they are the same (up to a constant factor). Hence, we can conclude that U follows a gamma distribution with parameters a = λ = 1/2.

(3) To find the value of г(1/2), we need to evaluate the integral г (}) = √ e¯x-¹/2dx. Making the change of variables y = √2x, we can write the integral as г (}) = √(2/π) ∫₀^∞ y^(1/2 - 1) * e^(-y^2/4) dy. This is the pdf of a chi-square distribution with one degree of freedom, which is equivalent to the gamma distribution with a = 1/2 and λ = 1/2. Hence, we have г(1/2) = √π/2, and substituting this value in the pdf we obtained in part (2) gives us fU(u) = u^(-1/2) * (1/√π) * e^(-u/2).

Learn more about transformation method here:

https://brainly.com/question/30242216

#SPJ11

The NBA experienced tremendous growth under the leadership of the late Commissioner David Stern. In 1990, the league had annual revenue of 165 million dollars. By 2018, the revenue increased to 5,500 million. the answer is r(t) = 165 *[tex](e)^{0.084}[/tex]t.

To write a formula for an exponential function, r(t), where t is years since 1990 and r(t) is measured in millions of dollars, the given information can be used. By using the given information, the formula can be written as r(t) = 165 * [tex](e)^{kt}[/tex]

where r(t) is the annual revenue in millions of dollars in t years since 1990.

The constant k is the growth rate per year. Since the revenue has grown exponentially, e is the base of the exponential function. According to the given data, in 1990 the revenue was 165 million dollars.

This means when t = 0, the revenue was 165 million dollars. Therefore, we can substitute these values in the formula:

r(0) = 165 million dollars165 = 165 * [/tex](e)^{0}[/tex]

This means k = ln(55/33) / 28

≈ 0.084,

where ln is the natural logarithm. To get the exponential function, substitute the value of k:

r(t) = 165 * [tex](e)^{0.084}[/tex]t

Where t is measured in years since 1990. This is the required formula for an exponential function.

Hence, the answer is r(t) = 165 *[tex](e)^{0.084}[/tex]t.

To know more about natural logarithms visit:

https://brainly.com/question/29154694

#SPJ11

To test whether there are differences in the mean weight gains due to the three different feed supplements, we can use a one-way ANOVA test. The null hypothesis is that there is no difference in the mean weight gains between the three groups, while the alternative hypothesis is that at least one group has a different mean weight gain than the others.

Using the formula for one-way ANOVA, we can calculate the F-statistic:

F = (SSbetween / dfbetween) / (SSwithin / dfwithin)

where SSbetween is the sum of squares between groups, dfbetween is the degrees of freedom between groups, SSwithin is the sum of squares within groups, and dfwithin is the degrees of freedom within groups.

We can calculate the necessary values as follows:

SSbetween = [(500+650+530+680)/4 - (700+620+780+830+860)/5]^2 +
          [(500+520+400+580+410)/5 - (700+620+780+830+860)/5]^2 +
          [(500+650+530+680)/4 - (500+520+400+580+410)/5]^2
        = 21682.4

dfbetween = 3 - 1 = 2

SSwithin = (500-575)^2 + (650-575)^2 + (530-575)^2 + (680-575)^2 +
          (700-738)^2 + (620-738)^2 + (780-738)^2 + (830-738)^2 +
          (860-738)^2 + (500-480)^2 + (520-480)^2 + (400-480)^2 +
          (580-480)^2 + (410-480)^2
        = 123610

dfwithin = 15 - 3 = 12

Plugging in the values, we get:

F = (21682.4 / 2) / (123610 / 12) = 2.227

Using a significance level of α = 0.05, we can look up the critical F-value for 2 degrees of freedom for the numerator and 12 degrees of freedom for the denominator in an F-distribution table. The critical value is 3.89.

Since the calculated F-statistic of 2.227 is less than the critical value of 3.89, we fail to reject the null hypothesis. This means that there is not enough evidence to conclude that there are differences in the mean weight gains due to the three different feed supplements.

To know more about ANOVA:

https://brainly.com/question/15084465

#SPJ11

To approximate the sum with an error of magnitude less than 5×10−6, we can use the alternating series test and the remainder estimate for alternating series. The alternating series test tells us that the sum of an alternating series is between any two consecutive partial sums. Therefore, we can approximate the sum by computing the first few partial sums until the difference between two consecutive partial sums is less than 5×10−6.

Let's start by computing the first few partial sums:
S1 = 1/4!
S2 = 1/4! - 1/8!
S3 = 1/4! - 1/8! + 1/12!
S4 = 1/4! - 1/8! + 1/12! - 1/16!
We can use a calculator to compute these partial sums and get:
S1 ≈ 0.00004166667
S2 ≈ 0.00004114583
S3 ≈ 0.00004166666
S4 ≈ 0.00004166667
We can see that the difference between S3 and S4 is less than 5×10−6, so we can approximate the sum as:
∑n=0[infinity](−1)n 1 (4n)! ≈ S3 = 0.00004166666
To estimate the error of this approximation, we can use the remainder estimate for alternating series:
|Rn| ≤ an+1
where Rn is the error of the nth partial sum, and an+1 is the absolute value of the next term in the series. In this case, an+1 = 1/[(4n+4)!], so we have:
|Rn| ≤ 1/[(4n+4)!]
We can use a calculator to find the smallest n such that |Rn| < 5×10−6:
1/[(4n+4)!] < 5×10−6
n ≥ 9
Therefore, the error of our approximation is less than 1/[(4×9+4)!] ≈ 2.8×10−13, which is smaller than 5×10−6.

Learn more about magnitude here

https://brainly.com/question/30337362

#SPJ11

The probability of a puppy being picked is 6/13 and 369 students have taken course in either calculus or discrete mathematics.

What is probability?

The simple definition of probability is the likelihood that something will occur. We can discuss the probabilities of different outcomes, or how likely they are, whenever we are unsure of how an event will turn out. Statistics refers to the study of events subject to probability.

Suppose that the denote the following event as:

C: Student who have taken course in calculus.

D: Students who have taken course in discrete mathematics.

1) As given,

N(C) = 345, N(D) = 212, N (C ∩ D) = 188.

To find the number of students who have taken course in either calculus or discrete mathematics.

i.e. to find N (C ∪ D)

Now,

N (C ∪ D) = N(C) + N(D) - N (C ∩ D)

Substitute values respectively,

N (C ∪ D) = 345 + 212 -188

N (C ∪ D) = 369.

So, 369 students have taken course in either calculus or discrete mathematics.

2.) given that,

in a pet store there are 6 puppies, 9 kittens, 4 gerbils and 7 parakeets.

Puppies are chosen twice as often as the other pets.

So, the probability of a puppy being picked is,

= (6 × 2) / (6 + 9 + 4 + 7)

= 12 / 26

= 6 / 13.

To learn more about Probability from the given link.

https://brainly.com/question/13604758

# SPJ4

Charlie starts with $984.20 in his savings account and uses $381.80 to buy his plane ticket. This leaves him with:

$984.20 - $381.80 = $602.40

Next, Charlie transfers 1/4 of his remaining savings into his checking account. To do this, he needs to find 1/4 of $602.40:

(1/4) x $602.40 = $150.60

Charlie transfers $150.60 from his savings account to his checking account, leaving him with:

$602.40 - $150.60 = $451.80

Therefore, Charlie has $451.80 left in his savings account after buying his plane ticket and transferring 1/4 of his remaining savings to his checking account.

To learn more about savings click here : brainly.com/question/7965246

#SPJ11

The most up-to-date or specific local data on infant mortality rates or causes of death in Rappahannock District.

However, according to the Centers for Disease Control and Prevention (CDC), birth defects are a leading cause of infant mortality in the United States, accounting for about 20% of all infant deaths. The specific proportionate mortality due to birth defects in Rappahannock District or any other location would depend on local factors such as maternal health, access to prenatal care, and environmental factors that could contribute to birth defects. To get accurate and up-to-date information on the proportionate mortality due to birth defects in Rappahannock District, you may want to consult with local hospitals, public health departments, or health research institutions in the area. They may have the data you need or be able to direct you to other sources of data.

Learn more about mortality here

https://brainly.com/question/30774820

#SPJ11

Among Babies Born With Birth Defects The CDC Reports Infant Mortality As About 40 Per 1000. Approximately 3% Of Newborns Have Serious Birth Defects. 9. If These Statistics Hold True For Virginia How Many Deaths Due To Birth Defects Likely Have Occurred In Rappahannock District In 2012? 10. Among Infants In Rappahannock District Then, What Would Be The Among babies born with birth defects the CDC reports infant mortality as about 40 per 1000. Approximately 3% of newborns have serious birth defects.

Among infants in Rappahannock District then, what would be the proportionate mortality due to birth defects?

The Percentage of shoes that cost more than $40 based on the given numbers.

11. Describe the distribution of the data:

Without additional information, it is difficult to precisely describe the distribution of the data. However, we can provide some general observations based on the provided numbers. The data appears to be a list of individual values without any clear pattern or trend. The distribution could be symmetrical, skewed, or even contain outliers. To provide a more detailed description, additional information such as the context or specific characteristics of the data would be needed.

9. What is the median value?

To find the median value, we need to arrange the data in ascending order. The given numbers are: 29, 34, 889, 402566, 500. After arranging them in ascending order, we have: 29, 34, 500, 889, 402566. Since there are five numbers, the median value will be the middle number, which in this case is 500.

10. What is the mean of the data? Round to the nearest penny.

To find the mean, we sum up all the numbers and divide by the total count. The sum of the numbers is: 29 + 34 + 889 + 402566 + 500 = 403018. Dividing this sum by the count of numbers (5), we get: 403018 / 5 = 80603.6. Rounding this to the nearest penny, the mean of the data is approximately $80603.60.

12. What percent of shoes cost more than $40?

the given data does not provide any information related to shoes or their prices. Therefore, it is not possible to determine the percentage of shoes that cost more than $40 based on the given numbers.

To know more about Percentage .

https://brainly.com/question/12024093

#SPJ11

Answer: a. Here is a sketch of the triangle:

       A

        |\

        | \

   6    |  \   Label: 6 units

        |   \

        |    \

        |_____\

  B   90°  20°    C

In the sketch, the vertex with the right angle is labeled as A, the vertex with the 20° angle is labeled as B, and the remaining vertex is labeled as C. The side between angle A (90°) and angle B (20°) is labeled as 6 units.

b. Based on the given information, only one unique triangle can be drawn. The measures of the angles and the side lengths uniquely define the triangle in this case.

Evaluating the function, we will see that the missing values in the table are:

Here we have a table for the cubic function:

y = 5x³

To find the missing values, we need to evaluate this function in the correspondent values.

The first value is when x = -2, then we will get:

a = 5*(-2)³

a = -40

When x = 0.

b = 5*(0)³

b = 0

When x = 1:

c = 5*(1)³

c = 5

When x = 3:

d = 5*(3)³

d = 135

These are the missing values in the table.

Learn more about evaluating functions at:

https://brainly.com/question/1719822

#SPJ1

The antiderivative of π/2 (x - cos(x)) dx is -(x - cos(x))/cos(x) + ln|cos(x)| + C, and the definite integral from 0 to π/2 is π/2 + ln(2).

We can use the integration by substitution method to solve this problem. Let u = x - cos(x), then du/dx = 1 + sin(x), and dx = du/(1 + sin(x)). Substituting these into the integral, we get:

∫π/2 (x - cos(x)) dx = ∫(π/2)0 u du/(1 + sin(x))

= ∫(π/2)0 u/(1 + sin(x)) du

= ∫(π/2)0 u/(1 + sin(x)) * (1 - sin(x))/(1 - sin(x)) du

= ∫(π/2)0 u(1 - sin(x))/(cos^2(x)) du

Next, we can use the substitution v = cos(x), then dv/dx = -sin(x), and dx = -dv/sqrt(1 - v^2). Substituting these, we get:

∫π/2 (x - cos(x)) dx = ∫10 (u(1 - v^2)/v^2) dv

= ∫10 (u/v^2 - u) dv

= -u/v + ln|v| + C

Substituting back u and v, we get:

∫π/2 (x - cos(x)) dx = - (x - cos(x))/cos(x) + ln|cos(x)| |π/2 to 0

= π/2 + ln(2).

For such more questions on Antiderivative:

https://brainly.com/question/30215870

#SPJ11

The antiderivative of π/2 (x - cos(x)) dx is -(x - cos(x))/cos(x) + ln|cos(x)| + C, and the definite integral from 0 to π/2 is π/2 + ln(2).

We can use the integration by substitution method to solve this problem. Let u = x - cos(x), then du/dx = 1 + sin(x), and dx = du/(1 + sin(x)). Substituting these into the integral, we get:

∫π/2 (x - cos(x)) dx = ∫(π/2)0 u du/(1 + sin(x))

= ∫(π/2)0 u/(1 + sin(x)) du= ∫(π/2)0 u/(1 + sin(x)) * (1 - sin(x))/(1 - sin(x)) du

= ∫(π/2)0 u(1 - sin(x))/(cos^2(x)) du

Next, we can use the substitution

v = cos(x), then dv/dx = -sin(x), and dx = -dv/sqrt(1 - v^2).

Substituting these, we get:

∫π/2 (x - cos(x)) dx = ∫10 (u(1 - v^2)/v^2) dv

= ∫10 (u/v^2 - u) dv

= -u/v + ln|v| + C

Substituting back u and v, we get:

∫π/2 (x - cos(x)) dx = - (x - cos(x))/cos(x) + ln|cos(x)| |π/2 to 0

= π/2 + ln(2).

Therefore, The antiderivative of π/2 (x - cos(x)) dx is -(x - cos(x))/cos(x) + ln|cos(x)| + C, and the definite integral from 0 to π/2 is π/2 + ln(2).

Learn more about Antiderivative:

brainly.com/question/31396969

#SPJ11

These are the corresponding snapshots of memory after each set of statements have been executed.The value of x becomes 2 and the value of z becomes 2.

To answer this question, we need to understand how memory works in a computer. Whenever we declare a variable, it is assigned a memory location, and whenever we assign a value to it, that value is stored in that memory location. The corresponding snapshot of memory is the state of memory after each set of statements has been executed.
So, let's look at the given statements and their corresponding snapshots of memory:
1. int x1; x1 = 3+4
In this statement, we are declaring a variable x1 of type integer and assigning it the value 3+4, which is 7. Therefore, the corresponding snapshot of memory would look like this:
| Variable | Memory Location | Value |
|----------|----------------|-------|
| x1       | 1000           | 7     |
2. int x(1), z(5); x = __z = __z = z/++x;
In this statement, we are declaring two variables x and z of type integer and assigning the value 1 to x and 5 to z. Then, we are dividing z by the pre-incremented value of x and assigning the result to both x and z.
The pre-increment operator increases the value of x by 1 before it is used in the division. Therefore, the value of x becomes 2 and the value of z becomes 2.
So, the corresponding snapshot of memory would look like this:
| Variable | Memory Location | Value |
|----------|----------------|-------|
| x1       | 1000           | 7     |
| x        | 1004           | 2     |
| z        | 1008           | 2     |
In summary, the corresponding snapshots of memory after executing the given set of statements are:
1. x1 = 7
| Variable | Memory Location | Value |
|----------|----------------|-------|
| x1       | 1000           | 7     |
2. x = 2, z = 2
| Variable | Memory Location | Value |
|----------|----------------|-------|
| x1       | 1000           | 7     |
| x        | 1004           | 2     |
| z        | 1008           | 2     |
Therefore, these are the corresponding snapshots of memory after each set of statements have been executed.

To know more about corresponding visit :

https://brainly.com/question/29207897

#SPJ11

The correct answer is option (c) 2.06.  For every dollar of debt, Blaine and Lindsay have approximately $2.06 in assets

The asset-to-debt ratio for Blaine and Lindsay McDonald can be calculated by dividing their total assets by their total debt. Using the given values, the calculation would be as follows:

Asset-to-debt ratio = Total assets / Total debt

                   = $346,000 / $168,000

The asset-to-debt ratio is a financial metric that provides insight into the financial health and leverage of an individual, company, or entity. It measures the proportion of assets to debt and is used to assess the ability to meet financial obligations and the level of risk associated with the amount of debt.

In this case, Blaine and Lindsay McDonald have total assets valued at $346,000 and total debt of $168,000. By dividing the total assets by the total debt, we obtain the asset-to-debt ratio of approximately 2.06. This means that for every dollar of debt, Blaine and Lindsay have approximately $2.06 in assets. A higher asset-to-debt ratio generally indicates a stronger financial position and lower risk, as there are more assets available to cover the debt obligations.

Learn more about  asset-to-debt ratio here:

https://brainly.com/question/30253017

#SPJ11

The statemet "one way to generate a zero-mean wss process with a desired psd is to pass white noise through an appropriate lti system" is True.

A wide-sense stationary (WSS) process is a stochastic process that has a constant mean and a power spectral density (PSD) that depends only on the frequency. To generate a zero-mean WSS process with a desired PSD, one way is to pass white noise through a linear time-invariant (LTI) system, which is also known as a filter.

The output of an LTI system to a white noise input is a random process that has a WSS property. Moreover, the power spectral density of the output process is equal to the product of the input white noise's PSD and the LTI system's frequency response. Therefore, by appropriately designing the frequency response of the LTI system, one can obtain a desired PSD for the output process.

Thus, the answer is true.

Learn more about wide-sense stationary: https://brainly.com/question/9295445

#SPJ11