A cylindrical bucket of liquid (density rho) is rotated about its symmetry axis, which is vertical. If the angular velocity is ω, show that the pressure at a distance r from the rotation axis is
P=P0+1/2rhoω2r2,
where P0 is the pressure at r=0

Answers

Answer 1

Showing the pressure at a distance, it generate the equation dP=1/2rhoω^2r^2dr.

How do you get the given equation?

The pressure at a point in a fluid is given by the hydrostatic equation, which states that the pressure is equal to the density of the fluid multiplied by the acceleration due to gravity, and the height of the fluid above that point. In a rotating cylinder of liquid, there is an additional centrifugal force acting on the fluid, which must be taken into account.

To find the pressure at a distance r from the rotation axis, we can use the following equation:

P = P0 + 1/2 * rho * ω^2 * r^2

Where P0 is the pressure at the center of the cylinder (r=0), rho is the density of the fluid, and omega is the angular velocity of the cylinder.

This equation can be derived by considering the force balance in the radial direction. The pressure difference dP between two points at radius r and r+dr due to centrifugal force is dP=1/2rhoω^2r^2dr. Integrating this over the radius gives the above equation

Therefore, the correct answer is as given above

learn more about pressure at a distance: https://brainly.com/question/29727793

#SPJ1


Related Questions

A diet is to contain at least 2400 mg vitamin C, 1800mg Calcium, and 1200 calories every day. Two foods, a dairy-based meal and a vegan option are to fulfill these requirements. Each ounce of the dairy-based meal provides 50 mg vitamin C, 30 mg Calcium, and 10 calories. Each ounce of the vegan option provides 20 mg vitamin C, 20 mg Calcium, and 40 calories. If the dairy-based meal costs $0.042 per ounce and the vegan option costs $0.208 per ounce, how many ounces of each food should be purchased to minimize costs? What is that minimum cost (per day)?

Answers

Answer:

The answer is below

Explanation:

Let x represent the number of ounce of dairy based meal and let y represent the number of vegan option in ounce.

Since the diet must contain at least 2400 mg vitamin C, therefore:

50x + 20y ≥ 2400

Since the diet must contain at least 1800 mg Calcium, therefore:

30x + 20y ≥ 1200

Since the diet must contain at least 1200 calories, therefore:

10x + 40y ≥ 1200

Therefore the constraints are:

50x + 20y ≥ 2400

30x + 20y ≥ 1200

10x + 40y ≥ 1200

x > 0, y > 0

The graph was drawn using geogebra online graphing tool, and the solution to the problem is at:

C(30, 45) and D(48, 18)

dairy-based meal costs $0.042 per ounce and the vegan option costs $0.208 per ounce. The cost equation is:

Cost = 0.042x + 0.208y

At C(30, 45);  Cost = 0.042(30) + 0.208(45) = $10.62

At C(48, 18);  Cost = 0.042(48) + 0.208(18) = $5.76

The minimum cost is at (48, 18). That is 48 dairy based meal and 18 vegan

3.
What part of your eye is responsible for regulating the amount of light that enters your eye?

Answers

Answer:

Iris

Explanation:

The iris seems to be the illuminated portion of the eyes which really covers the pupil. It controls the amount of light reaching the eye. The lens is indeed a translucent layer of the retina that serves to concentrate light and objects on the lens.

Answer:

I hope this helps.

Explanation:

Consider the air over a city to be a box that measures 100 km per side that reaches up to an altitude of 1.0 km. Wind (clean air) is blowing into the box along one of its sides with a speed of 4 m/s. An air pollutant is emitted into the box at a rate of 10.0 kg/s; the pollutant degrades with a rate constant k = 0.20/hr. a. Find the steady state concentration of the pollutant (µg/m3 ) in the box if the air is assumed to be completely mixed. b. If the wind speed suddenly drops to 1 m/s, estimate the concentration of the pollutant (µg/m3 ) two hours later.

Answers

Answer:

a)  ρ = 6.25 10⁵ μg / m³, b) ρ  = 1 10⁷ μg / m³

Explanation:

Let's analyze the exercise a little before starting, we must know the amount of pollutant in the box, that the one that enters less the one that degrades and with this value find the density or concentration.

Let's start by finding the volume of air that goes into the box

               V = Lh x

Let's find the distance of air that enters per unit of time, as it goes at constant speed

               x = v₀ t

we substitute

               V₀ = Lh v₀ t

At this same time, a quantity of pollutant is distributed

              Q₀ = r t  

the contaminant that is entering reaches the entire box, therefore the total amount of contaminant is

               Q = Qo t

we substitute

               Q = r t²

the net amount of pollutant that remains is that less enters the one that degraded in the same time, as they ask for the steady state

              [tex]Q_{net}[/tex]= Q - k t

 

the pollutant concentration is

              ρ = Q_net / V

              V = L L h

              ρ =[tex]\frac{r \ t^2 - k \ t}{ L^2 h}[/tex]

              ρ = [tex](r \frac{ L^2}{v_o^2} - k \frac{L}{v_o} ) \frac{1}{L^2 h}[/tex]

               ρ = [tex]\frac{r}{ v_o h} -\frac{k}{v_o L h}[/tex]

let's reduce the magnitudes to the SI system

           r = 10 kg / s

           L = 100 km = 100 10³ m

           h = 1 km = 1 10³ m

           k = dq / dt = 0.20 1/h ( 1h/3600 s) = 5.5555 10⁻⁵  1/s

           v₀ = 4 m / s

let's calculate

The volume of the box

             V = (100 100 1) 109

             V = 1 10¹³ m³

            ρ = [tex]\frac{10}{ 4^2 \ 1\ 10^3 } - \frac{5.5556 \ 10^{-5}}{ 4 \ 100 \ 10^3 1 \ 10^3}[/tex]

            ρ = [tex]6.25 10^{-4} - 1.389 ^{-13}[/tex]

            ρ = 6.25 10⁻⁴ kg / m³

       

let's reduce to μg / m³

               ρ = 6.25 10⁻⁻⁴ kg / m³ (10⁹ μg / 1kg)

               ρ = 6.25 10⁵ μg / m³

 

b) in case the air speed decreases to v₀ = 1 m / s

             

             ρ= \frac{10}{ 1^2 \  1\  10^3 } - \frac{5.5556 \ 10^{-5}}{ 1 \ 100 \ 10^3  1 \ 10^3}

             ρ = 1 10⁻² - 5.5556 10⁻¹³

             ρ =  1 10⁻² kg / m³

             ρ  = 1 10⁷ μg / m³

when material allow to heat to pass though them rapidly they are known as __________​

Answers

Answer:

They are conductors/conductive. Materials that can transfer thermal energy well are conductive.

Explanation:

Answer:when material allow to heat to pass though them rapidly they are known as Conductors

What are conductors

In physics /electrical engineering They  allow the flow of charge (electrical current) in one or more directions. Materials made of metal are common electrical conductors.

What are examples of conductors

.Silver

.copper

.iron

.aluminum

.brass

Difference between conductors and insulators?

Insulators a material that is a poor conductor (as of electricity or heat)Whereas Conductors are fantastic at allowing the flow of the heat.

Hope this helps

                                                                           -Tobie

Student pushes a 50 N block across the floor for a distance of 15 m how much work was done to move the block

Answers

Answer:

750 J

Explanation:

We have a student that pushes a 50N block  across the floor for a distance of 15m. The question is asking how much work was done to move the block.

To solve this, we must know that we are looking for a certain thing called joules. And to get the answer, we must follow the formula of W = FS

F being the force and S being the distance.

W = FS

W = (50)(15)

W = 750

Therefore, 750 joules is our answer.

Two blocks connected by a string are pulled across a horizontal surface by a force applied to one of the blocks, as shown to the right. The mass of the left block m1 = 1.4 kg and the mass of the right block m2 = 4.9 kg. The angle between the applied force and the horizontal is θ = 54°. The coefficient of kinetic friction between the blocks and the surface is μ = 0.38. Each block has an acceleration of a = 3.6 m/s2 to the right.

Answers

Answer:

Explanation:The Mass Of The Left Block M1 = 1.3 Kg And The Mass Of The Right Block M2 = 3.1 Kg. The Angle Between The String And The Horizontal Is ... (10%) Problem 8: Two blocks connected by a string are pulled across a horizontal surface by a ... m m, 50% Part (a) Write an equation for the magnitude of the force exerted by the ...

20. For each improvement in glider design, engineers follow
O A. the written instructions that are provided in the hang glider build kit.
O B. an iterative process of testing, modifying, retesting, and modifying again.
O C. a complicated process of checks and balances while obtaining financing.
O D. a mathematical process, rejecting designs that don't follow blueprint dimensions.
Turn In

Answers

B. Engineers perform lots of trials.

Which two statements below are central ideas in the article, "How Gross Is Your Bathroom"?
a. What you can't see might hurt you.
b. Different numbers of bacteria are hiding on various surfaces around your bathroom.
c. Most bacteria are harmless, and some are even good for you.
d. Your bathroom is filled with germs that you might not know anything about, including
viruses and bacteria.

Answers


b. Different numbers of bacteria are hiding on various surfaces around your bathroom.

d. Your bathroom is filled with germs that you might not know anything about, including
viruses and bacteria.

Help plz I’ll mark brainliest

Answers

Answer:

It's A

Explanation:

sound waves are longitudinal they need a medium to travel through

What are some technological limitations that currently prevent humans from traveling to distant planets?

Answers

Answer:

Propulsion system, antigravitational tech

Explanation:

Fuel is extremely inefficient and expensive not to mention it weighs a lot. You really only need to reach escape velocity to leave earth. The rest is just a little amount of boosting to alter course and slow down for landing. I couldn't really think of much. Once we have an antigravitational system then you could say the whole rocket is holding you back because the design would be different. Nobody really knows how to defy gravity but that would be a technolgical limitation for sure.

it is an organic compound and an essential micronutrient that the body needs in small amounts.​

Answers

Answer:

Nutrients the body needs in relatively small amounts are called micronutrients. They include vitamins and minerals. Vitamins are organic compounds that are needed by the body to function properly. ... Vitamins and minerals do not provide energy, but they are still essential for good health

Explanation:

In a physics lab experiment for the determination of moment of inertia, a team weighs an object and finds a mass of 2.15 kg. They then hang the object on a pivot located 0.163 m from the object's center of mass and set it swinging at a small amplitude. As two of the team members carefully count 113 cycles of oscillation, the third member measures a duration of 241 s. What is the moment of inertia of the object with respect to its center of mass about an axis parallel to the pivot axis

Answers

Answer:

0.339 kgm²

Explanation:

We know the period of this pendulum, T = 2π√(I/mgh) where I = moment of inertia of the object about the pivot axis, m = mass of object = 2.15 kg, g = acceleration due to gravity = 9.8 m/s² and h = distance of center of mass of object from pivot point = 0.163 m.

Since T = 2π√(I/mgh), making I subject of the formula, we have

I = mghT²/4π²

Now since it takes 241 s to complete 113 cycles, then it takes 241 s/113 cycles to complete one cycle.

So, T = 241 s/113 = 2.133 s

So, Substituting the values of the variables into I, we have

I = mghT²/4π²

I = 2.15 kg × 9.8 m/s² × 0.163 m × (2.133 s)²/4π²

I = 15.63/4π² kgm²

I = 0.396 kgm²

Now from the parallel axis theorem, I = I' + mh² where I' = moment of inertia of object with respect to its center of mass about an axis parallel to the pivot axis

I' = I - mh²

I' = 0.396 kgm² - 2.15 kg × (0.163 m)²

I' = 0.396 kgm² - 0.057 kgm²

I' = 0.339 kgm²

2.) The lob in tennis is an effective tactic when your opponent is near the net. It consists of lofting the ball over his/her head, forcing them to move quickly away from the net. Suppose that you loft the ball with an initial speed of 15m/s at an angle of 50 degrees from the horizontal. At this moment your opponent is 10m from the ball. They begin to run away from you 0.3 seconds after the ball was launched hoping to reach the ball and hit it back to you at a height of 2.1m above where you hit it. What is the minimum average speed that your opponent must move so that he is in position to hit this ball

Answers

Answer:

The minimum average speed the opponent must move so that he is in position to hit the ball is approximately 5.79 m/s

Explanation:

The given parameters of the ball are;

The initial speed of the ball = 15 m/s

The direction in which the ball is launched = 50° above the horizontal

The location of the other tennis player when the ball is launched = 10 m from the ball

The time at which the other tennis player begins to run = 0.3 seconds after the ball is launched

The height at which the ball is hit back = 2.1 m above the height from which the ball is launched

The vertical position, 'y', at time, 't', of a projectile motion is given as follows;

y = (u·sinθ)·t - 1/2·g·t²

When y = 2.1 m, we have;

2.1 = (15·sin(50°))·t - 1/2·9.8·t²

∴ 4.9·t² - (15·sin(50°))·t + 2.1 = 0

Solving with the aid of a graphing calculator function, we get;

t = 0.199776187257 s or t = 2.14525782198 s

Therefore, the ball is at 2.1 m above the start point on the other side of the court at t ≈ 2.145 seconds

The horizontal distance, 'x', the ball travels at t ≈ 2.145 seconds is given as follows;

x = u × cos(50°) × t = 15 × cos(50°) × 2.145 ≈ 20.682 m

The horizontal distance the ball travels at t ≈ 2.145 seconds, x ≈ 20.682 m

Therefore, we have;

The time the other player has to reach the ball, t₂ =2.145 s - 0.3 s ≈ 1.845 s

The distance the other player has to run, d = 20.682 m - 10 m = 10.682 m

The minimum average speed the other player has to move with, [tex]v_s[/tex] = d/t₂

∴ [tex]v_s[/tex] = 10.682 m/(1.845 s) ≈ 5.78970189702 m/s ≈ 5.79 m/s

The minimum average speed the opponent must move so that he is in position to hit the ball, [tex]v_s[/tex] ≈ 5.79 m/s.

uppose that the terminal speed of a particular sky diver is 150 km/h in the spread-eagle position and 320 km/h in the nosedive position. Assuming that the diver's drag coefficient C does not change from one position to the other, find the ratio of the effective cross-sectional area A in the slower position to that in the faster position (Aslower / Afaster).

Answers

Answer:

4.55

Explanation:

The terminal speed of a diver is given by:

[tex]v_t=\sqrt{\frac{2mg}{C\rho A} } \\\\Where\ m=mass\ of \ driver,d=acceleration\ due\ to\ gravity,C=drag\ \\coefficient,A=cross\ sectional\ Area.\\\\Therefore:\\\\A=\frac{2mg}{C \rho v_t^2} \\\\For\ area\ with\ terminal\ speed\ in\ spread\ angle\ position(v_s):\\\\A_s=\frac{2mg}{C \rho v_s^2} \\\\For\ area\ with\ terminal\ speed\ in\ nose\ dive\ position(v_n):\\\\A_n=\frac{2mg}{C \rho v_n^2}\\\\Therefore\ since\ g,m,C,\rho\ are\ constant:\\\\[/tex]

[tex]\frac{A_s}{A_n}= \frac{\frac{2mg}{C \rho v_s^2}}{\frac{2mg}{C \rho v_n^2}}\\\\\frac{A_s}{A_n}= \frac{v_n}{v_s} \\\\v_n=320\ km/h,v_s=150\ km/h\\\\\frac{A_s}{A_n}=\frac{320^2}{150^2} =4.55[/tex]

g Suppose that you seal an ordinary 60W lightbulb and a suitable battery inside a transparent enclosure and suspend the system from a very sensitive balance. (a) Compute the change in the mass of the system if the lamp is on continuously for one year at full power. (b) What difference, if any, would it make if the inner surface of the container were a perfect reflector

Answers

Answer:

kekemeeimdeiddnekem

Explanation:

mdjdjdiddmjd jjeneeiej

Astronauts aboard the ISS move at about 8000 m/s, relative to us when we look upward.How long does an astronaut need to stay aboard the space station to be a full second youngerthan people on the ground? Please show and explain how you would set-up the problem,before you actually try to solve it. If you cannot solve it exactly, please try to offer an estimate.(5 pts)

Answers

Answer:

#_time = 7.5 10⁴ s

Explanation:

In order for the astronaut to be younger than the people on earth, it follows that the speed of light has a constant speed in vacuum (c = 3 108 m / s), therefore with the expressions of special relativity we have.

            t = [tex]\frac{t_p}{ \sqrt{1- (v/c)^2} }[/tex]

where t_p is the person's own time in an immobile reference frame,

           [tex]t_{p} = t \sqrt{1 - (\frac{v}{c})^2 }[/tex]

let's calculate

we assume that the speed of the space station is constant

              [tex]t_p = 1 \sqrt{1 - \frac{8 \ 10^3}{3 \ 10^8} }[/tex]

             [tex]t_p = 1 \sqrt{1- 2.6666 \ 10^{-5}}[/tex]

             t_ =  0.99998666657   s

             

therefore the time change is

             Δt = t - t_p

             Δt = 1 - 0.9998666657                  

              Δt = 1.3333 10⁻⁵ s

this is the delay in each second, therefore we can use a direct rule of proportions. If Δt was delayed every second, how much second (#_time) is needed for a total delay of Δt = 1 s

               #_time = 1 / Δt

               #_time =[tex]\frac{1}{1.3333 \ 10^{-5}}[/tex]

               #_time = 7.5 10⁴ s

Explain how a common housecat gets “worms.”eplain(science)

Answers

Answer:

Cats most commonly contract worms after coming into contact with parasite eggs or infected feces. A cat may walk through an area with eggs or infected feces, and since cats are often such fastidious groomers, they will then ingest the eggs or fecal particles as they clean their fur and feet.

Explanation:

this is the only thing in my book hope it helps

Please help! Will mark brainliest.

Answers

Answer:

1122.8

Explanation:

12.73 kg x 9.8 m/s^2 x 9m

=1122.786

Rounded=1122.8

If 0.5 C charge passes through a wire in 10 seconds, what will be the value of the current flowing through the wire? *
20 mA
30 mA
50 mA
60 mA​

Answers

Answer:

electric current passing through it will be 50mA

Explanation:

electric current = charge / time

I = Q / TI = 0.5 / 10 I = 0.05 ampere

current = 0.05 A = 50mA

If 0.5C charge passes through a wire in 10 seconds, then 50mA current is flowing through the wire. Thus, the correct option is C.

What is Electric current?

Electric current is the flow of electricity in an electronic circuit. It is the amount of electricity flowing through a electronic circuit. It is generally measured in amperes (A). The larger the value in amperes, the more electricity is flowing in that circuit.

The formula for calculation of Electric current is:

I = Q/T

where, I = electric current,

Q = amount of charge,

T = time required

Therefore, the current flowing in the wire is:

I = 0.5C/ 10 seconds

I = 0.05 A or 50mA (1mA = 10⁻³A)

Therefore, the correct option is C.

Learn more about Electric current here:

https://brainly.com/question/2264542

#SPJ6

The next four questions refer to the situation below.
A person is swimming in a river with a current that has speed vR with respect to the shore. The swimmer first swims downstream (i.e. in the direction of the current) at a constant speed, vS , with respect to the water. The swimmer travels a distance D in a time tOut . The swimmer then changes direction to swim upstream (i.e. against the direction of the current) at a constant speed, vS , with respect to the water and returns to her original starting point (located a distance D from her turn-around point) in a time tIn .
What is tOut in terms of vR, vS, and D, as needed?

Answers

Answer:

 t_{out} = [tex]\frac{v_s - v_r}{v_s+v_r}[/tex] t_{in},      t_{out} = [tex]\frac{D}{v_s +v_r}[/tex]

Explanation:

This in a relative velocity exercise in one dimension,

let's start with the swimmer going downstream

its speed is

         [tex]v_{sg 1} = v_{sr} + v_{rg}[/tex]

The subscripts are s for the swimmer, r for the river and g for the Earth

with the velocity constant we can use the relations of uniform motion

           [tex]v_{sg1}[/tex] = D / [tex]t_{out}[/tex]

           D = v_{sg1}  t_{out}

now let's analyze when the swimmer turns around and returns to the starting point

        [tex]v_{sg 2} = v_{sr} - v_{rg}[/tex]

         [tex]v_{sg 2}[/tex] = D / [tex]t_{in}[/tex]

         D = v_{sg 2}  t_{in}

with the distance is the same we can equalize

           [tex]v_{sg1} t_{out} = v_{sg2} t_{in}[/tex]

          t_{out} =  t_{in}

           t_{out} = [tex]\frac{v_s - v_r}{v_s+v_r}[/tex] t_{in}

This must be the answer since the return time is known. If you want to delete this time

            t_{in}= D / [tex]v_{sg2}[/tex]

we substitute

            t_{out} = \frac{v_s - v_r}{v_s+v_r} ()

            t_{out} = [tex]\frac{D}{v_s +v_r}[/tex]

Two blocks collide on a frictionless surface, as shown above. They have a combined mass of 10 kg and a speed of 2.5 m/s. Before the collision, one of the blocks was at rest. This block had a mass of 8 kg. What was the speed of the second block?

Answers

Answer:

12.5 m/s

Explanation:

Excuse my scribbles!

I had to work backwards using the inelastic collision formula for this problem.

Formula: V=(M₁V₁+M₂V₂)/(M₁+M₂)V= Combined SpeedM₁= Block 1's MassV₁= Block 1's Velocity M₂= Block 2's MassV₂= Block 2's Velocity

Step 1: Substitute in the values provided in the problem

Combined mass: 10kgCombined speed: 2.5m/sBlock 1's mass: 8kgBlock 1's speed: 0

2.5=(8*0)+(?*?)/(8+?)

Step 2: Subtract block 1's mass from the combined mass to determine block 2's mass

10-8=2     Block 2's mass is 2.

2.5=(8*0)+(2*x)/(8+2)    

Now simplify.

2.5=(2*x)/(8+2)

2.5=2x/10

Step 3: Multiply both sides by the reciprocal

(5)2.5=2x/10(5)

12.5=x

Answer is checked in the attached images!

A large truck and a small car traveling at the same speed have a head-on collision. The vehi-cle to undergo the greater change in velocity will be?

Answers

Answer:

The car ...Explanation:

PLEASE HELP QUICK which statement describes a primary difference between an electromagnetic wave and mechanical wave?​

A. electromagnetic waves can travel through empty space

B. electromagnetic waves can be transverse longitudinal or surface waves

C. electromagnetic waves can only travel through solids liquids or gases

D. electromagnetic waves need a medium to transfer energy

Answers

Answer:

A.

Explanation:

An electromagnetic wave is produced by the interaction between a variable electric field, and a magnetic electric field, which propagates in space, even in vaccuum, at a fixed speed, whilst the mechanical waves require a medium in order to transfer energy.

Answer: A

Explanation:

The engine in an imaginary sportThe engine in an imaginary sports car can provide constant power to the wheels over a range of speeds from 0 to 70 miles per hour (mph). At full power, the car can accelerate from zero to 30.0 mph in time 1.00 s .s car can provide constant power to the wheels over a range of speeds from 0 to 70 miles per hour (mph).

Required:
a. At full power, how long would it take for the car to accelerate from 0 to 58.0mph?
b. A more realistic car would cause the wheels to spin in a manner that would result in the ground pushing it forward with a constant force (in contrast to the constant power in Part A). If such a sports car went from zero to 29.0mph in time 1.50s , how long would it take to go from zero to 58.0mph ?

Answers

Answer:

a. 1.93 s b. 3 s

Explanation:

a. At full power, how long would it take for the car to accelerate from 0 to 58.0mph?

Since the car accelerates from 0 to 30 mph in 1.00 s, we find its acceleration, a from a = (v - u)/t where u = 0 m/s, v = 30 mph and t = 1.00s = 1/3600 h

So, substituting the values of the variables into the equation, we have

a = (v - u)/t

a = (30 mph - 0 mph)/ 1/3600 h

a = 30 mph × 3600 /h

a = 108000 mph²

So, we find the time it takes the car to accelerate to 58 mph from 0 mph from

t = (v' - u')/a where u = 0 mph, v = 58 mph and a = 108000 mph²

So, substituting the value of the variables into the equation, we have

t = (v' - u')/a

t = (58 mph - 0 mph)/108000 mph²

t = 58 mph/108000 mph²

t = 5.37 × 10⁻⁴ h

t = 5.37 × 10⁻⁴ × 3600 s

t = 1.93 s

b. A more realistic car would cause the wheels to spin in a manner that would result in the ground pushing it forward with a constant force (in contrast to the constant power in Part A). If such a sports car went from zero to 29.0mph in time 1.50s , how long would it take to go from zero to 58.0mph ?

Since the car accelerates from 0 to 29 mph in 1.50 s, we find its acceleration, a from a = (v - u)/t where u = 0 m/s, v = 29 mph and t = 1.05s = 1/3600 h

So, substituting the values of the variables into the equation, we have

a = (v - u)/t

a = (29 mph - 0 mph)/ 1.5/3600 h

a = 29 mph × 3600/1.5 /h

a = 104400/1.5 mph²

a = 69600 mph²

So, we find the time it takes the car to accelerate to 58 mph from 0 mph from

t = (v' - u')/a where u = 0 mph, v = 58 mph and a = 69600 mph²

So, substituting the value of the variables into the equation, we have

t = (v' - u')/a

t = (58 mph - 0 mph)/69600 mph²

t = 58 mph/69600 mph²

t = 8.33 × 10⁻⁴ h

t = 8.33 × 10⁻⁴ × 3600 s

t = 3 s

The force between two charges when they are 2 cm apart is
0.036 N. If the sum of two charges is 10uC, what are the
charges? (1/4ttɛo=9x109 Nm-C-2).​

Answers

Answer:

[tex]q_1=9.9998\mu C[/tex] and [tex]q_2=0.0002\mu C[/tex]

Or

[tex]q_1=0.00016\mu C[/tex] and [tex]q_2=9.99984\mu C[/tex]

Explanation:

We are given that

Force between two charges=0.036 N=[tex]36\times 10^{-3}N[/tex]

Distance between two charges, r=2cm=[tex]2\times 10^{-2}[/tex]m

1m=100cm

Sum of two charges=[tex]10\mu C[/tex]

Let one charge=[tex]q_1=q\mu C=q\times 10^{-6}C[/tex]

[tex]q_2=(10-q)\times 10^{-6} C[/tex]

We know that

Electric force between two charges

[tex]F=\frac{kq_1q_2}{r^2}[/tex]

Where [tex]k=\frac{1}{4\pi \epsilon_0}=9\times 10^{9}[/tex]

Using the formula

[tex]36\times 10^{-3}=9\times 10^{9}\times \frac{q\times 10^{-6}\times(10-q)\times 10^{-6}}{(2\times 10^{-2})^2}[/tex]

[tex]\frac{144\times 10^{-7}}{9\times 10^{9}\times 10^{-12}}=q(10-q)[/tex]

[tex]0.0016=10q-q^2[/tex]

[tex]q^2-10q+0.0016=0[/tex]

[tex]10000q^2-100000q+16=0[/tex]

[tex]q=\frac{100000\pm\sqrt{(100000)^2-4\times 10000\times 16}}{2\times 10000}[/tex]

Using the formula

[tex]x=\frac{-b\pm \sqrt{b^2-4ac}}{2a}[/tex]

[tex]q=9.999[/tex] and [tex]q=0.00016[/tex]

[tex]q_2=10-9.9998=0.0002[/tex]

[tex]q_2=10-0.00016=9.99984[/tex]

Hence, two charges are

[tex]q_1=9.9998\mu C[/tex] and [tex]q_2=0.0002\mu C[/tex]

Or

[tex]q_1=0.00016\mu C[/tex] and [tex]q_2=9.99984\mu C[/tex]

Diagram B D c с Which car has: Ke = 100 PE=0? * 1 point A B C D​

Answers

Answer:

The car C has KE = 100, PE = 0

Explanation:

The principle of conservation of energy states that although energy can be transformed from one form to another, the total energy of the given system remains unchanged.

The energy that a body possesses due to its motion or position is known as mechanical energy. There are two kinds of mechanical energy: kinetic energy, KE and potential energy, PE.

Kinetic energy is the energy that a body possesses due to its motion.

Potential energy is the energy a body possesses due to its position.

From the principle of conservation of energy, kinetic energy can be transformed into potential energy and vice versa, but in all cases the energy is conserved or constant.

In the diagram above, the cars at various positions of rest or motion are transforming the various forms of mechanical energy, but the total energy is conserved at every point. At the point A, energy is all potential, at B, it is partly potential partly kinetic energy, However, at the point C, all the potential energy has been converted to kinetic energy. At D, some of the kinetic energy has been converted to potential energy as the car climbs up the hill.

Therefore, the car C has KE = 100, PE = 0

Drag the tiles to the correct boxes to complete the pairs
Match the particles with their characteristics.
subatomic particles with a positive charge
subatomic particles with a negative charge
subatomic particles with no charge
made of atoms
neutrons
electrons
protons
malaria

Answers

Answer:

1. Protons.

2. Electrons.

3. Neutrons.

4. Molecules.

Explanation:

1. Protons: subatomic particles with a positive charge. They are bound together in the nucleus of an atom due to strong nuclear forces.

2. Electrons: subatomic particles with a negative charge. Electrons can be defined as subatomic particles that are negatively charged and as such has a magnitude of -1.

3. Neutrons: subatomic particles with no charge. The negative charge of the electrons cancels the positive charge of the protons.

4. Molecules: they are made of atoms.

Generally, molecules attach on the inside of a mineral to give it shape. Therefore, the molecule of a mineral is a crystal three-dimensional regular structure (arrangement) of chemical particles that are bonded together and determines its shape.

Due to the fact that these molecules are structurally arranged or ordered and are repeated by different symmetrical and translational operations they determine the shape of minerals.

he nucleus of 8Be, which consists of 4 protons and 4 neutrons, is very unstable and spontaneously breaks into two alpha particles (helium nuclei, each consisting of 2 protons and 2 neutrons). (a) What is the force between the two alpha particles when they are 6.60 ✕ 10−15 m apart? N (b) What is the initial magnitude of the acceleration of the alpha particles due to this force? Note that the mass of an alpha particle is 4.0026 u. m/s2

Answers

Answer:

A) F = 21.134 N

B) a = 3180.76 × 10^(24) m/s²

Explanation:

A) We are given;

Mass of alpha particle; m = 4.0026 u

Now, 1u = 1.66 × 10^(-27) kg

Thus; m = 4.0026 × 1.66 × 10^(-27)

Distance apart; r = 6.60 × 10^(−15) m

Charge on the alpha particle is;

q = 2e = 2 × 1.6 × 10^(-19) C

Formula for the force between the two alpha particles is;

F = kq1.q2/r²

k = 8.99 × 10^(9) N.m²/C²

q1 = q2 = 2 × 1.6 × 10^(-19) C

F = 8.99 × 10^(9) × (2 × 1.6 × 10^(-19))²/(6.60 × 10^(−15))²

F = 21.134 N

B) acceleration is given by;

a = F/m

Thus; a = 21.134/(4.0026 × 1.66 × 10^(-27))

a = 3180.76 × 10^(24) m/s²

Animals conduct_______.

A. cellular respiration

B. photosynthesis

C. both cellular respiration and photosynthesis

Answers

a. cellular respiration
C. Both cellular respiration and photosynthesis

2. One tin for weight control is to:
Eat alone
Eat slowly

Answers

Answer:

Eat slowly

Explanation:

If you eat slower, you'll chew your food better, which leads to better digestion. Digestion actually starts in the mouth, so the more work you do up there, the less you'll have to do in your stomach. This can help lead to fewer digestive problems. Less stress.

Eat slowly is answer
Other Questions
How does the federal funds rate affect individual borrowers? What are the main determinants of the federal funds rate? When mechanical work is done on a system, an increase normally occurs in itsO temperature.O internal energy.O both of theseO neither of these What are 4 renewable resources? What are the slopes of the point o,2 1 , -1 What is the difference between East and West Egg Where does each character live? I NEED HELP ASAP RN! Yuri computes the mean and standard deviation for the sample data set 12, 14, 9, and 21. He finds the mean is 14. His steps for finding the standard deviation are below. . Consumer surplus is: A. The value consumers get from a supplier B. The value consumers do not pay because of a discount by supplier C. The value consumers get from a good but do not pay for D. Equal to the amount consumers pay for a good. The typical full-service restaurant uses a product-focused process. grapg the line 2/3 passing through (-4,1) please answer i need 4. In a class of 26 students, 18 of the students have a pet. Ofthe pet owners, 12 prefer dogs to cats. Of the 8 non-petowners, 3 prefer dogs to cats. What is the probability ofselecting a student from the class who is a pet owner orprefers cats to dogs? A state of equity is present when: the O/I ratio has more outputs than inputs the O/I ratio has equal inputs and outputs the O/I ratio equals the referent others O/I ratio the jobs being compared are similar None of these What are the two elements of a myth? What are the 5 concepts of fitness? Halima is on her way home in her car. She has driven 9 kilometers so far, which is one-third of the way home. What is the total length of her drive? Rename 1 foot with an equivalent factor in inches. Marge said that she subtracted 20 from both sides of an equation to solve it. Colin thinks that the equation she was solving could have been 6 + t = 20. Does Colin's reasoning make sense? Explain. What is the formula of mirror image?