The initial energy stored in the capacitor is 1.5E+6 J and the initial current through the patient I= 25.0 A.
The initial energy stored in the capacitor can be found using the formula for energy stored in a capacitor U₀=1/2CV^2 Plugging in the given values, we get:
U₀=1/2*(50E-6F)*(6000V)^2
U₀=1.5E+6 J
(b) The initial current through the patient can be found using Ohm's law, which states that I = V/R. Plugging in the given values, we get:
I = 6000V/240Ω
I= 25.0 A
(c) The energy dissipated in the patient during the 1.0 ms can be found by multiplying the power by the duration. The power can be found using the formula:
P = IV = (25A)(6000V) = 150,000 W. So the energy dissipated is:
Energy = P * t
= 150,000W * 0.001s
Energy=150 J
(d) To compare the average power supplied by the power source with the average power delivered to the patient, we need to know the power of the power source. Since the capacitor is charged to 6.0 kV in 2.0 s, the power can be found by:
Power = (Energy) / (time)
= (1.5E+6 J) / (2.0s)
Power= 750,000 W
So, the average power supplied by the power source is 750 kW and the average power delivered to the patient is 150 W.
(e) A capacitor is used in a defibrillator to store a large amount of energy in a small package. The energy stored in the capacitor can be discharged quickly to provide a large current to the patient's heart to restore normal beating.
The capacitor also allows the defibrillator to deliver a high-energy shock without drawing a large current from the power source, which improves the safety of the device.
To know more about Potential differences:
https://brainly.com/question/3406867
#SPJ4
A spring is attached to the floor and pulled straight up by a string. The string's tension is measured. The graph in the figure shows the tension in the spring as a function of the spring's length L (Figure 1)
If the spring obeys Hooke's Law, what is the spring contract?
Hooke's Law states that when a spring is extended, the force is proportional to the length increase above the equilibrium length.
How do you determine a spring's limit?According to the Young's modulus definition: F = Y A ∆L/L. F = kL is the formula for the spring constant. (According to the corresponding magnitudes equation, L represents the size of the departure from equilibrium.) k thus equals Y A/L.Hooke's Law states that when a spring is extended, the force is proportional to the length increase above the equilibrium length. The following formula can be used to get the spring constant: The spring constant, k, has the formula k = -F/x.F = k(x – x0) (x – x0)The spring's displacement from equilibrium is measured in units of x, where k is the spring constant. The opposing direction of the spring force indicated by the negative sign indicates that it is a restoring force.To learn more about Hooke's Law refer to:
https://brainly.com/question/2648431
#SPJ1
The rod shown below moves to the right on essentially
zero-resistance rails at a speed of v = 3.0 m/s. If
B = 0.75 T everywhere in the region, what is the current
through the 5.0-Ω resistor? Does the current circulate
clockwise or counterclockwise?
The required, current 0.018 A circulates counterclockwise through the 5.0-Ω resistor. Option B is correct.
The induced emf causes a current to flow through the loop (the rod and the 5.0-Ω resistor). Since the resistance (R) of the resistor is given as 5.0 Ω, we can find the current (I) through the resistor:
I =E/R
Substitute the value of the induced emf:
I = -[Bwv]/R
Substitute the value in the above equation:
I = -[0.75*4/100*3]/5
I = 0.018 A counterclockwise direction
Thus, the required, current 0.018 A circulates counterclockwise through the 5.0-Ω resistor. Option B is correct.
Learn more about the current here:
https://brainly.com/question/15738976
#SPJ12
A drag racing car accelerates from rest for 4.0s, boosting the car to a top speed of 130 m/s. At this instant, the engines shut off and a parachute is deployed, causing it to slow down at a rate of 2.5 m/s^2 until it stops.
a) How far does the car travel from when it starts until the parachute is deployed?
b) What is the total distance traveled by the car from its starting point to when it comes to a complete stop?
The distance that the racing car traveled from when it starts until the parachute is deployed is 20 m. The total distance traveled by the car from its starting point to when it comes to a complete stop is 520 m.
What is acceleration ?The acceleration of a moving body is the rate of change in its velocity. It is a vector quantity having magnitude and direction. Thus, a change in magnitude or direction or both of them will cause an acceleration of the body.
Given that, speed v = 36 m/s
time = 4 s
Then the distance travelled from starting = 36. m/s × 4 s
then s = ut + 1/2 at²
initial velocity u = 0
a = 2.5 m/s²
s = 1/2 2.5 m/s²× 16 s² = 20 m
Therefor, the distance traveled by the car until the parachute is deployed is 20 m .
Find more on acceleration:
brainly.com/question/12550364
#SPJ1
an airplane flies due west at an airspeed of 406mph. the wind is blowing from the northeast at 15mph. determine the bearing of the airplane in degrees relative to the positive x-axis, rounded to two decimal places. provide your answer below:
The aircraft's bearing with relation to the positive x-axis in degrees is Q= 1.94
Using the principal compass direction (north or south), angle, and an indication of east or west, bearing produces a direction. A bearing identifies a line's direction as either north or south, with a deflection to the east or west of a certain number of degrees. Therefore, a bearing will never have an angle greater than 90 degrees.
As per the data given in the above question are as bellow,
The provided details are as follow,
An airplane flies due west at an airspeed of 406mph
Wind speed is 15 mph and coming from the northeast.
find the aircraft's bearing with relation to the positive x-axis in degrees.
To determine bearing of airplane.
We have,
[tex]$$\begin{aligned} \tan Q & =\frac{20 \sin (45)}{406+20 \cos (45)} \\& =0.033902 \\Q & =1.9417 \\Q & \cong 1.94\end{aligned}$$[/tex]
For such more question on bearing
https://brainly.com/question/24142612
#SPJ4
Could you please help me with this?? I literally failed my quiz 3 times
A bar magnet is positioned near a coil of wire, as shown in the figure below.
What is the direction of the current in the resistor when the magnet is moved to the left and to the right?
(a) to the left
O The current is right to left.
O No current is induced.
O The current is left to right.
(b) to the right
O No current is induced.
O The current is left to right.
O The current is right to left.
When the bar magnet is moved to the left , no current is induced. when the magnet is moved to to the right, the current is right to left.
Are there electric currents in magnets?If a coil magnet remains static, there is no current flowing. However, if you spin it vigorously enough, you will induce a current. By rotating a coil of wire around a magnet or vice versa, an electrical current is produced by pushing the wire's electrons. In essence, kinetic energy—the energy of motion—is transformed into electrical energy via electricity generators.
What is the magnet's current flow direction?The magnetic field is parallel to the wire and oriented in that direction. The direction of the current can be determined by wrapping the fingers of your right hand around a wire while pointing your thumb towards the direction of the current.
Learn more about bar magnet here:
brainly.com/question/18403251
#SPJ4
would you expect neurospora crassa dna to have a higher or lower tm than human dna? explain.
(drag & drop)
The DNA of Neurospora crassa is predicted to have a Tm that is relatively lower than that of human DNA. When compared to Neurospora crassa, the human DNA has a greater Tm value.
Given its extremely low G-C composition, An extensively utilised heterothallic filamentous fungus in genetic and biochemical studies is called Neurospora crassa. Both heterothallic and homothallic individuals belong to the genus Neurospora. N. crassa, which is commonly just referred to by its genus name, is the most thoroughly researched species. Mutagenesis has revealed a number of clock genes in Neurospora crassa that regulate circadian conidiation cycles. Frequency (frq) is a key gene that cycles at the mRNA and protein levels and participates in a negative autoregulatory feedback loop.
Learn more about Neurospora crassa here
https://brainly.com/question/29661931
#SPJ4
Two objects are placed 74 meters apart and the resulting force is 0.0103 Newtons. One object has 12 times the mass of the other object. Find the mass of both objects.
The mass of the both objects are 4.24 × 10⁵ kg and 2.544×10⁶ kg respectively.
What is gravitational force?The force of attraction between any two bodies is directly proportional to the product of their masses and is inversely proportional to the square of their distance, according to Newton's universal law of gravitation.
As two objects are placed 74 meters apart and the resulting force is 0.0103 N.
The Force between two objects = GMm/r²
0.0103 = 6.6×10⁻¹¹× m × 6m/(74)²
m = 4.24 × 10⁵ kg.
hence, the mass of the both objects are 4.24 × 10⁵ kg and (6×4.24 × 10⁵ kg) = 2.544×10⁶ kg respectively.
Learn more about gravitational force here:
https://brainly.com/question/12528243
#SPJ1
A cube of brass has a shear force of 1650 N acting
on it as shown in the figure below (Figure 1). This
causes the cube to deform through an angle of 0.06
Part A
What is the length of one of the cube's sides?
Enter your answer in millimeters.
The length of one of the cube's sides is 3.97 mm.
What is the area of the cube?The area of the cube is calculated by applying the following formula as shown below.
Young's modulus is equal to ratio of shear stress to shear strain.
E = Shear stress / Shear strain
Shear stress = F / A
where;
F is the applied forceA is the area of the cubeE is Young's modulusShear strain = e / L
Shear strain = tanθ
E = Shear stress / ( tanθ )
E = ( F/Atanθ )
A = ( F / Etanθ )
Young's modulus of brass = 1 x 10¹¹ Pa
A = ( 1650 / 1 x 10¹¹ x tan(0.06)
A = 1.576 x 10⁻⁵ m²
The length of a side of the cube is calculated as follows;
L² = A
L = √ A
L = √ (1.576 x 10⁻⁵ )
L = 3.97 x 10⁻³ m
L = 3.97 mm
Learn more about shear force here: https://brainly.com/question/19863900
#SPJ1
The stability of a vehicle is often rated by the static stability factor, which is one-half the track width divided by the height of the center of gravity above the road.
Part A
One SUV has a static stability factor of 1.2. What is the critical angle?
Express your answer using two significant figures.
The critical angle of SUV has a static stability factor of 1.2 is found to be Ф = 47.73
How is the static stability factor determined?The static stability factor (SSF) is defined as the ratio of the height of the centre of gravity to one half the track width.
static stability factor (SSF)= tan Ф
=> Ф = tan^-1 (SSF)
=> tan^-1(1.2) => 47.73
How can you gauge the stability of a vehicle?The formula SSF=T/2H is used to determine a vehicle's SSF, where T denotes "track width" and H denotes "height of centre of gravity."
Where is the gravity's centre?The average location of an object's weight is known as its centre of gravity. Any object's motion through space may be completely explained in terms of how its centre of gravity moves from one location to another and that is how it rotates around its axis.
Learn more about center of gravity here:
brainly.com/question/17409320
#SPJ4
A very large plastic sheet carries a uniform charge density of -6.00 nC/m^2 on one face.
a) As you move away from the sheet along a line perpendicular to it, does the electric field increase or decrease? Explain.
The work done on the unit positive charge to move away from the sheet along a line perpendicular to it and the electric field increase with distance.
What does "electric potential" mean?Against an electric field, the amount of labour required to transport a unit charge from one location to another is known as electric potential. Although any location beyond the range of the electric field charge can be used, Earth is typically selected as the reference point. potential electricity.
How are charge and the electric field related?The presence of an electric charge results in a modification of space known as the electric field. Between a source charge and a test charge, the electric field mediates the electric force. A vector by definition points away from positive charges and toward negative charges, which is what the field does.
Learn more about electric field here:
brainly.com/question/15800304
#SPJ4
Driving in a car with a constant speed of 12 m>s, you
encounter a bump in the road that has a circular crosssection, as shown in Figure 9.30. If the radius of curvature
of the bump is 35 m, find the apparent weight of a 67-kg
person in your car as you pass over the top of the bump.
As you pass over the top of the bump, the apparent weight of a 67 kg person in a car is therefore -17.80N.
What is constant speed with example?Constant motion is a sort of motion that takes place when either the object's speed varies by the same amount every second or its distance travelled is the same every second. A car that goes continuously for 5 seconds in a straight line at 20 metres per second is said to be in motion. An object is considered to be moving at a constant speed when it covers the same distance in the same amount of time. When moving at a constant pace, an object covers a certain distance in a fixed amount of time. S = d t is a formula that can be used to express the speed.
What is uniform or constant speed?The body is said to be moving at a uniform speed if it travels the same distance in the same amount of time. If the body goes in a straight line without changing its direction, the velocity is said to be constant. In all scenarios, there is no acceleration. Recall that the uniform velocity is a constant velocity as well.
-mg+N = -mass (v2/r) -(67(9.8) +N
= -(67(9.30/35) +N
=-17.80N
To know more about Constant Speed visit
:https://brainly.com/question/30151073
#SPJ1
Help me with this q please
The pressure of a gas is 2.50 atm in a 1.60 L container. Calculate the final pressure of the gas if the volume is decreased to 1.10 liters.
So, the final pressure of the gas if the volume is decreased to 1.10 liters is approximately 3.64 atm.
IntroductionHi! Here I will help you to solve the question about the relationship between pressure changes and volume changes in a closed system. Because there is no change in temperature, we can assume that the temperature is the same in every condition (isothermal state). In this isothermal situation, Boyle's Law will apply where the product of pressure and volume in a closed container whose temperature that kept constant is constant. The general equation of Boyle's Law is in the following equation:
[tex] \boxed{\sf{\bold{P \times V = C}}} [/tex]
With the following condition:
P = pressure of the gas in closed systemV = volume of the gas in closed systemC = constant conditionFormula UsedIn this case, we can calculate the relationship between changes in pressure and changes in gas volume in a closed system with the following equation:
[tex] \boxed{\sf{\bold{P_i \times V_i = P_f \times V_f}}} [/tex]
With the following condition:
[tex] \sf{P_i}[/tex] = the pressure at initial sample[tex] \sf{P_f}[/tex] = the pressure at final sample[tex] \sf{V_i}[/tex] = the volume at initial sample[tex] \sf{V_f}[/tex] = the volume at final sampleProblem SolvingWe know that:[tex] \sf{P_i}[/tex] = the pressure at initial sample = 2.50 atm.[tex] \sf{V_i}[/tex] = the volume at initial sample = 1.60 L.[tex] \sf{V_f}[/tex] = the volume at final sample = 1.10 L.What was asked?[tex] \sf{P_f}[/tex] = the pressure at final sample = ... atmStep by step:[tex] \sf{P_i \times V_i = P_f \times V_f} [/tex]
[tex] \sf{2.5 \times 1.6 = P_f \times 1.1} [/tex]
[tex] \sf{P_f = \frac{2.5 \times 1.6}{1.1}} [/tex]
[tex] \sf{\bold{P_f \approx 3.64 \: atm}} [/tex]
ConclusionSo, the final pressure of the gas if the volume is decreased to 1.10 liters is approximately 3.64 atm.
Learn MoreThe basic concepts about Boyle's Law https://brainly.com/question/1437490The explanation about isothermal process https://brainly.com/question/12023162An inductor used in a dc power supply has an inductance of 11.5 H and a resistance of 150 Ohm. It carries a current of 0.650 A. Part A
What is the energy stored in the magnetic field? Part B
At what rate is thermal energy developed in the inductor? Part C
Does your answer to part B mean that the magnetic-field energy is decreasing with time? a. No. Energy does not come from the energy stored in the inductor. b. Yes. Energy comes from the energy stored in the inductor. c. Yes. The rate of thermal energy development is not zero. d. No. The rate of thermal energy development is zero.
An inductor is a passive two-terminal electrical component which resists changes in electric current and can store energy in a magnetic field when electric current flows through it.
What is an Magnetic field ?
A magnetic field is a region of space around a magnet or a current-carrying conductor in which a magnetic force exists. It is a vector field, meaning that at any point in the field, a vector can be defined that describes the direction and strength of the field at that point.
We need given the following data:
The inductance of an inductor is: Lo=12.50H.
The resistance of a resistor is: Ro=180.0Ω.
The current is: io=0.60A.
(A)The expression for the energy stored in the magnetic field is
Eo=1 / 2 x Loi2o
Solve for the energy stored in the magnetic field
Eo=1/2 ×12.50H×(0.60A)2
=2.25J
Thus the energy stored in the magnetic field is 2.25J.
(B)The expression for the rate of thermal energy developed in the inductor is
Po=i2oRo
Solve for the rate of thermal energy developed in the inductor
Po=(0.60A)2×180.0Ω
=64.80W
Thus the rate of thermal energy developed in the inductor is
64.80W.
(C)Energy does not come from the energy stored in the inductor.
Because of the ohmic resistance of the wire, the energy is delivered to the inductor.
So the magnetic field energy is not decreasing with time.
Thus the option (iii) is correct.
To know more about Inductor,
https://brainly.com/question/30216563
#SPJ4
how far from the dog will the suitcase land? you can ignore air resistance.
The initial vertical velocity of the suitcase will be the same as the vertical velocity of the airplane at the time it was dropped. As a result, the suitcase will land 795 meters away from the dog.
What does Velocity mean?
Velocity is a measure of the rate at which an object's position changes over time. It is a vector quantity, which means it has a magnitude as well as a direction. Velocity is the product of speed and direction.
What does Vertica Velocity mean?
Vertica Velocity is a cloud-based analytics platform that enables users to quickly and easily analyze, visualize, and share their data. It allows users to easily build and deploy data-driven applications that can be used to make better decisions in real-time. It provides a wide range of features, such as interactive dashboards, drag-and-drop visualizations, and advanced analytics. With Vertica Velocity, users can quickly and easily access the insights they need to make better decisions.
To know more about Velocity,
https://brainly.com/question/80295?source=archive
#SPJ4
Suppose the distance from the lens system of the eye (cornea +lens) to the retina is 17 mm.
(a) What must the power of the lens be whenlooking at distant objects?
(b) What must the power of the lens be when looking at an object20.0 cm from the eye?
a) Power of lens is 0.058D
Focal length =17mm
Power=1/focal length
Power=1/17
Power=0.058D
b) Power of the lens when looking at an object 20.0 cm from the eye is 0.05D
Focal length =20cm
Power=1/focal length
Power=1/20
Power=0.05D
What is the power of the lens?
The power of a lens is defined as the reciprocal of its focal length. It is represented by the letter P. The power P of a lens of focal length f (in m) is given by. P=1f. The SI unit of power of a lens is 'dioptre'.
How do you calculate eye lens power?
The power of a lens is defined as the reciprocal of its focal length in meters, or D = 1/f, where D is the power in diopters and f is the focal length in meters.
To know more about the power of lens:
https://brainly.in/question/13653807
#SPJ4
Which of the following would change the period of oscillation of this torsion pendulum? a. increasing the mass
b. decreasing the initial angular displacement c. replacing the disk with sphere of equal mass and radius d. hanging the pendulum in an elevator accelerating downward Subomit
Option A and Option C are correct .
What is pendulum ?
Pendulum is an object suspended from a fixed point that can swing back and forth under the influence of gravity. A pendulum is used to regulate the movement of a clock because the time interval between each complete swing, called the period, is constant. The formula for the pendulum period T is the 2π square root of T = √L/g.
The Italian scientist Galileo (circa 1583) first noticed the invariance of the pendulum's period by comparing the motion of a swinging lamp in the Cathedral of Pisa with its pulse rate.
To learn more about pendulum ,click the given link;
https://brainly.com/question/26449711
#SPJ4
Estimate the magnitude of the normal force n acting on an apple that rests on a flat surface.
The magnitude of the normal force acting on an object that rests on a flat surface is equal to the weight of the object, which is the force of gravity acting on it.
To estimate the magnitude of the normal force acting on an apple, we need to know its mass. On average, an apple weighs around 150 grams. To convert this to kilograms we divide by 1000, so the mass of an apple is 0.15 kg.
On substituting this values into the equation, we get:
F = m * g
F = 0.15 kg * 9.8 m/s^2
F ≈ 1.47 N
So the magnitude of the normal force acting on an apple that rests on a flat surface is approximately 1.47 N. It's worth noting that this is an estimate and the normal force could change due to various factors such as the friction of the surface, the angle of the surface, or the shape of the apple.
Learn more about normal force here:
https://brainly.com/question/13340671
#SPJ4
The ball is ejected horizontally from the tube with a speed of 8m/s Find on of the path, y=f(x) and then find the ball's velocity and the angential components of acceleration when t=025 s
The path of the ball can be represented by the equation y(x) = (1/2)(-9.8)[tex](x/8)^2[/tex] + [tex]y_{0}[/tex], where [tex]y_{0}[/tex] is the initial vertical position of the ball. This equation describes a parabolic trajectory, the horizontal component of velocity is constant, so the equation for the horizontal position of the ball is x(t) = x0 + [tex]v_{x0}[/tex]*t, where [tex]x_{0}[/tex] is the initial position and [tex]v_{x0}[/tex] = 8 m/s.
The vertical position of the ball is given by y(t) = [tex]y_{0}[/tex] + [tex]v_{y0}[/tex]*t + (1/2)[tex]at^2[/tex], where [tex]y_{0}[/tex] is the initial position, [tex]v_{y0}[/tex] = 0 m/s, and a = -9.8 [tex]m/s^2[/tex] (the acceleration due to gravity).
At t = 0.25 s, the velocity of the ball is ([tex]v_{x0}[/tex], [tex]v_{y0}[/tex] + at) = (8 m/s, -2.45 m/s). The angular components of acceleration are (0 [tex]m/s^2[/tex], -9.8[tex]m/s^2[/tex]).
Read more about classical mechanics :
https://brainly.com/question/2663861
#SPJ4
Find the total positive charge of all the protons in 1.0mol of water.
The total positive charge of all the protons in 1.0mol of water is 6.022x10²⁴
What is a proton made of?Two up protons and the one down quark are found in protons. One up particle and two downwards quarks make up neutrons. The "strong nuclear force," one of the four basic forces, holds the nucleus together (gravity and electromagnetism are two others).The number many protons within an atom is crucial since it determines the atom's identity. A hydrogen atom will be recognized as having just one proton, a carbon atom as having six protons, and so on. An atom's elemental composition is determined by the number or protons in it.
Hence, each molecule has 10 protons.
We have 6.022 x 10²³ molecules in one mole of water,
therefore,
multiply this by 10 to get the amount of protons:
Protons in a mole of water: 6.022x10²⁴.
To know more about Proton visit:
https://brainly.com/question/12535409
#SPJ4
A number of wires carry currents into or out of the page as indicated in the figure. (a) Using loop 1 for Ampère's law, what is the net current through the interior of the loop? (b) Repeat for loop 2
The net current through the interior of the loop is 9 I into the screen.
And for loop two is 8 I out of the screen.
As per the given data, several wires carry currents into or out of the page.
Here we have to determine the net current through the interior of the loop.
For loop 1, the inward currents are 10 I and 14 I. The outward current is 15 I, so, the net current through loop 1 is,
I net = 10 I + 14 I - 15 I
= 9 I into the screen.
The net current through the interior of the loop is 9 I.
For loop 2, the inward current is 7 I, and the outward current is 15 I, so, the net current through loop 2 is,
I net = 15 I - 7 I
= 8 I Out of the screen.
Therefore the answer is 8 I.
For more questions on Ampere's law
https://brainly.com/question/15392451
#SPJ4
: Consider the following statement made by a student about each of the four motions in problem The magnitude of the force exerted by the Mock on an individual string is the same as the magnitude of the force exerted by that string on the block. They are a third law force pair. So I don't understand why the block doesn't move at constant speed if that is true.
" The student has correctly identified a Newton's third law (act ion-react ion) force pair. Explain why this does not mean that the block must move at constant speed.
The block does not move at constant speed because the force exerted by the string on the block is not the only force acting on the block.
What is velocity?Velocity is a measure of the rate and direction of change in the position of an object. It is a vector quantity, meaning it has both magnitude and direction. Velocity is usually expressed in meters per second (m/s).
For example, the block could also be subject to a frictional force from the surface it is resting on.
This force is acting in the opposite direction to the force from the string and it is not equal in magnitude, which means the net force acting on the block is not zero and it will not move at constant speed. Furthermore, the magnitude of the force from the string may also be changing due to the changing length of the string due to the motion of the block. As a result, the net force on the block will be constantly changing, leading to an acceleration and a change in the block's velocity.
To know more about velocity click-
https://brainly.com/question/24445340
#SPJ4
imagine that you are sitting a distance away from a speaker, which is emitting sound waves. the air pressure, evaluated right at your ear is oscillating in time as y(x, t)
The period of the wave that have Ф = 0 and ω = 2π /6 [tex]s^{-1}[/tex] is 6 sec and the phasor representation of the wave at the three different times t = 0,2,4s is plotted in the graph .
1.1 - Given Ф = 0 , w = 2π /6 [tex]s^{-1}[/tex]
we know , ω = 2π / T , T =period
2π /6 = 2π / T
T = 6 sec
1.2 - y(x,t) = A cos ( ωt ) , here Ф = 0 , [tex]p_{0}[/tex] is ignored .
At t = 0 sec ⇒ y(x,0) = Acos( ω * 0 )
=A cos0
y(x , 0) = A
At t = 2 sec ⇒ y(x,2) = Acos( 2π /6 *2)
= A cos( 2π /3)
y(x,2) = [tex]\frac{-A}{2}[/tex]
At t = 4 sec ⇒ y(x,4) = Acos( 2π /6 *4)
=Acos( 4π /3)
y(x,4) = [tex]\frac{-A}{2}[/tex]
The pattern of disruption brought on by energy moving away from the sound source is known as a sound wave. Longitudinal waves are what make up sound. An example of an energy type that propagates across a material via adiabatic loading and unloading is acoustic waves.
When energy moves through a medium (such as air, water, or any other liquid or solid substance), it creates a pattern of disruption that propagates away from the source of the sound.
For such more questions on Sound waves:
brainly.com/question/11797560
#SPJ4
Question:
Imagine that you are sitting a distance away from a speaker, which is emitting sound waves. the air pressure, evaluated right at your ear is oscillating in time as y(x, t)=A cos ( ωt- Ф )+[tex]P_{0}[/tex]
1.1 For question ,suppose that Ф = 0 and ω = 2π /6 [tex]s^{-1}[/tex].what is the period of the wave?
1.2 plot the phasor representation of the wave at the three different times t = 0,2,4s
An object's speed is increased by a factor of three. > 50% Part (a) How does the object's momentum change?
a. There is not enough information. b. It decreases by a factor of three
c. The momentum does not change. d. It increases by a factor of more than three e. It decreases by a factor of more than three f. It increases by a factor of three.
kinetic energy increases by a factor of 9 is the correct answer .
What is momentum ?
Momentum, the product of a particle's mass and its velocity. Momentum is a vector quantity. It has both magnitude and direction. Isaac Newton's second law of motion states that the rate of change of momentum over time is equal to the force acting on a particle. See Newton's Laws of Motion. From Newton's second law, if a particle is subject to a constant force over a period of time, the product of that force and the time interval (momentum) equals the change in momentum. Conversely, the momentum of a particle is a measure of the time it takes for a constant force to come to rest.
When speed is increased by a factor of three,
New speed v'= 3v where v is the initial speed
a) Momentum P= mv
So new momentum P'= mv'= m*3v= 3 mv= 3P
So momentum increases by a factor of three
b) Kinetic Energy KE=m(v^2)/2
New Kinetic Energy KE'= m(v'^2)/2= m((3v)^2)/2= 9 m(v^2)/2= 9 KE
Therefore kinetic energy increases by a factor of 9
To learn more about momentum ,click the given link;
brainly.com/question/402617
#SPJ4
What is a quantum number?
a) the number representing a discrete orbit or energy level
b) number of whole electron wavelengths absorbed by an object
c) the number of whole electron orbits in an electron wavelength
d) number of whole electron wavelengths removed from a continuous spectrum when it passes through a substance
A number that designates a specific orbit or energy level.
What are examples of energy level?How Do Energy Levels Work? Energy levels are the fixed locations outside of an atom's nucleus where electrons may be located (also known as electron shells). The tiny, negatively charged electrons encircle the smaller, positively charged nucleus in an atom. Energy levels mirror a ladder's rungs in a number of ways.
What level of energy does an atom have?Energy levels are nothing more than the electrons' set distances from an atom's nucleus. The electron shell is another name for the energy levels. An electron can migrate across energy levels, but it cannot remain in one energy level while in another.
To know more about energy level visit:
https://brainly.com/question/13892990
#SPJ1
nervous tissue is made up of newrogila and what other type of cell
The nervous tissue consists of two types of cells one is known as glial cells while the other is known as neurons.
The nervous tissue comprises neuroglia and what other type of cell?
The nervous system is very complex. We know that there are only two types of cells in the nerve tissue. The actual nerve cell is known as a neuron. The neuron is the conducting cell that can transmit impulses and the structural units of the nervous system. There are other types of cells is well which are known as the neuroglia, or glial, cells.
Basically, the nervous tissues consist of two cells one is called nerve cells while the other is called glial cells which help to transmit nerve impulses and also provide nutrients to neurons.
So we can conclude that the nervous tissue is made up of two types of cells, neurons, and glial cells.
Learn more about Nervous Tissue here: https://brainly.com/question/869589
#SPJ1
A 2-C charge and 4 -C charge attract each other with 10 N of force. How much will a 2-C charge and 8-C charge attract each other when placed the same distance apart?
The 2 C charge and the 8 C charge will attract each other by a force of 20 N
How do I determine the force of attraction?We'll begin by obtaining the distance between the 2 C charge and the 4C charge. Details below:
1st charge (q₁) = 2 C2nd charge (q₂) = 4 CForce (F) = 10 NElectric constant (K) = 9×10⁹ Nm²/C²Distance (r) = ?F = Kq₁q₂ / r²
10 = (9×10⁹ × 2 × 4) / r²
Cross multiply
10 × r² = 9×10⁹ × 2 × 4
Divide both sides by 10
r² = (9×10⁹ × 2 × 4) / 10
Take the square root of both sides
r = √[(9×10⁹ × 2 × 4) / 10]
r = 84852.8 m
Finally, we shall determine the force of attraction between the 2 C charge and the 8 C charge. Details below:
1st charge (q₁) = 2 C2nd charge (q₂) = 8 CDistance apart (r) = 84852.8 mElectric constant (K) = 9×10⁹ Nm²/C²Force of attraction (F) =?F = Kq₁q₂ / d²
F = (9×10⁹ × 2 × 8) / (84852.8)²
F = 20 N
Thus, the force of attraction between them is 20 N
Learn more about force of attraction:
https://brainly.com/question/28569085
#SPJ1
A 10,000 kg shipping container is on a truck moving at 75 mph on a flat road. The driver brings the container to a stop with an average force of 2500 N exerted on the container. Calculate the stopping distance.
When Shipping container is on a truck moving on a flat road then stopping distance is 180 meters.
Given,
mass m = 10000kg
speed v= 75mph
Average force F=2500N
When a car skids to a stop, the work done by friction upon the car is equal to the change in kinetic energy of the car. Work is directly proportional to the displacement of the car (skidding distance) and the kinetic energy is directly related to the square of the speed (KE=0.5*m*v2).
For this reason, the skidding distance is directly proportional to the square of the speed. So if the speed is tripled from 75 km/hr to 120 km/hr, then the stopping distance is increased by a factor of 9 (from 20 m to 9*20 m; or 180 m).
When analyzing forces in a structure or machine, it is conventional to classify forces as external forces. Constraint forces or internal forces.External forces arise from interaction between the system of interest and its surroundings.
Examples of external forces include gravitational forces; lift or drag forces arising from wind loading, electrostatic and electromagnetic forces; and buoyancy forces; among others.
To know more about stopping distance here
https://brainly.com/question/24020960
Determine distance between two charges Q1=500nC and Q2=- uC which interact with each force 670mN. The charges are immersion in the medium with relative permittivity Er=2 E0=8.85
The distance between the two charged particles is 8.2 cm.
What is the distance between the two charges?
The distance between the two charges is calculated by applying Coulomb's law of electrostatic force as shown below.
Mathematically, the formula for the force of attraction or repulsion between two charged particles is given as;
F = ( kq₁q₂ ) / ( r² )
where;
k is the coulomb's constantq₁ is the charge of the first particleq₂ is the charge of the second particler is the distance between the chargesr² = ( kq₁q₂ ) / ( F )
r = √ [ ( kq₁q₂ ) / ( F ) ]
The distance between the two charged particles is calculated as;
r = √ [ ( 9 x 10⁹ x 500 x 10⁻⁹ x 1 x 10⁻⁶ ) / ( 670 x 10⁻³ ) ]
r = 0.082 m
r = 8.2 cm
Learn more about distance between charges here: https://brainly.com/question/27826314
#SPJ1