A delivery truck with 2.0m -high aluminum sides is driving west at 50km/hr in a region where the earth's magnetic field is B= (5.0 x 10^-5 T, north)
a. What is the potential difference between the top and the bottom of the truck's side panels? E= ____ V

As the waves approach the shore, they slow down, the height of the waves increases and the wavelength decreases.

The ocean floor provides resistance to the waves' troughs as they go closer to the coast. The wave is slowed down by the friction it creates with the ocean floor. The wavelength of the waves is shortened by this friction. The crests rise higher and the troughs deepen as the wavelength shortens.

Friction at the wave's point of contact with the bottom slows it down. The wavelength is reduced as one wave slows down and is caught up to by another. The wave height increases even when the wavelength shrinks because the wave's energy remains constant.

To know more about waves:

https://brainly.com/question/13237598

#SPJ4

Answer:

Peter and John is a plate of rice together peterhead 2/5 of the quantity of rice white drone x 1/3 who ate more food than the other

The four major forces acting on the sled and the free-body diagram of the 4 major forces acting on the sled is attached below:

In physics and engineering, a free body diagram (FBD; also called a force diagram) is a graphical representation used to visualize the forces, moments, and resulting reactions applied to a body in a given state. expression. It represents a body or connected bodies that includes all applied forces, moments, and reactions acting on the body. A body can consist of several internal elements (such as a truss), or it can be a compact body (such as a beam). A series of free-body and other diagrams may be required to solve complex problems. A free body diagram consists of:

To know more about free body diagram, visit:

https://brainly.com/question/24087893

#SPJ1

The spreading of waves as they go through an aperture or around objects is known as diffraction. When the wavelength of the incident wave and the size of the aperture or obstruction are on the same order of magnitude, it happens.

More specifically, when applied to light, diffraction of light happens when a light wave travels past a corner or through an opening or slit that is physically smaller than the wavelength of that light, if not smaller.

The most frequent instance of diffraction is water waves that bend around a fixed object. Around the border of an item, light flexes similarly. Two tiny apertures are depicted in the animation as wave fronts travel through them.

To know more about diffraction visit :-

https://brainly.com/question/12290582

#SPJ4

The correct option is D, when a newly forming star is at its greatest luminosity, its energy source is gravitational contraction.

Gravitational contraction is the process by which objects in the universe collapse under their own gravity. It occurs when the internal pressure of an object is not strong enough to resist the pull of gravity. This can occur on small or large scales, from the collapse of a gas cloud to form stars to the collapse of entire galaxies.

As an object collapses, its temperature and density increase, and the collapse accelerate due to gravitational potential energy being converted into kinetic energy. This process can lead to the formation of stars, planets, and other objects in the universe. It is also the source of much of the energy released by stars, which powers the universe. Gravitational contraction is an important part of the astronomical theory of the formation of galaxies, stars, and planets.

To learn more about Gravitational contraction visit here:

brainly.com/question/15969901

#SPJ4

In the table's Properties column, notably in the entry for the Guidance magnet, Rob made a mistake.

It is untrue to say that a quickly changing electromagnet's current propels a train forward. To create a levitation force that lifts the train off the tracks and enables it to float, the guidance magnets in a Maglev train really work by repelling the guiding magnets on the vehicle from the guideway.

In order to maintain the train's levitation and stability, the polarity of its steering magnets must change quickly rather than the current.

Superconducting magnets, which don't suffer any major energy losses when repelling another magnet, are frequently used in Maglev trains. Instead, a repelling force produced by the magnets lifts the train off the rails and enables it to float.

The mistake is that the guidance magnets should push the train ahead and increase friction, not by repelling the magnets on the train from the guideway and creating a levitation force.

To learn more about magnets visit:

brainly.com/question/2841288

#SPJ4

The energy transferred to the system is equal to the work done. For the endothermic process work done is negative. The power of the system is the product of work and time. Hence, the power is 315000 watt.

Endothermic reactions are those which absorbs energy into the system. Thus the surrounding temperature gets decreased.

The calorimetric equation connecting the heat transferred q, with the specific heat, mass and temperature difference is  written as:

q = m c ΔT

Here, the heat energy transferred is equal to the work done on the system. Hence W = - 1050 J

Power of the system is the product of work done and time taken for the energy transfer.

Power = W.dt

w = - 1050 J

t = 5 min = 300 s

Then P = 1050 J × 300 = 315000 watt.

Find more on work done :

https://brainly.com/question/13662169

#SPJ1

For 0. 250 moles of gas in a piston, the change in internal energy is +131J. While 240 J of heat are supplied, the gas produces 109 J of work. The energy is a thermodynamic system's internal energy.

With the exception of the energies that are determined by how the system interacts with its environment, the system as a whole's kinetic energy of motion and potential energy with respect to external force fields are all that are contained within it. A typical kind of skin development are moles. Clusters of pigment-forming cells are what give them their common appearance as small, dark brown dots (melanocytes).

Internal energy change for U = Q+W is 240+(-109) = +131J.

Learn more about force here

https://brainly.com/question/13191643

#SPJ4

The force of gravitational attraction is 489.18N

                                          [tex]F = \frac{Gm_{1} m_{2} }{r^{2} }[/tex]

Where,

F is the gravitational force between two bodies

m1 is the mass of the first body = 50 Kg

m2 is the mass of the second body = [tex]5.97 * 10^{24} Kg[/tex]

r is the distance between the centres of two bodies = [tex]6.38 * 10^{6} m[/tex]

G = gravitational constant = [tex]6.67 * 10^{-11}[/tex]

Putting these values in above equation we get: F = 489.18N

To know more about gravity visit:

https://brainly.com/question/27943482

#SPJ1

When two objects are separated by a distance then gravitational attraction between them is 1.36 × 10^-9 N.

Given,

m = 1.5 × 10^5 kg

M = 8.5 × 10^2 kg

r = 2500 m

F=GmM/r^2

Here G = 6.67 × 10^-11 N.m^2/kg^2 is the value of the gravitational constant

F = 1.36 × 10^-9 N

Every body in the universe attracts every other body with a gravitational force that decreases with distance as 1/r2. But actually he knew more about the gravitational force: from the fact that bodies of different masses near the earth’s surface accelerate downwards at the same rate, using F = ma (Second Law).

If two bodies of different masses have the same acceleration they must be feeling forces in the same ratio as their masses (so a body twice as massive feels twice the gravitational force), that is, the gravitational force of attraction a body feels must be proportional to its mass.

Newton’s first clue that gravitation between bodies fell as the inverse-square of the distance may have come from comparing a falling apple to the falling moon, but important support for his idea was provided by a detailed description of planetary orbits constructed half a century earlier by Johannes Kepler.

To know more about gravitation here

https://brainly.com/question/25570480

#SPJ4

The corresponding change in temperature on the Fahrenheit scale More than 5°F.

In the Celsius scale, a temperature change of 5 degrees K corresponds to a shift of 50 degrees C. This is due to the fact that a temperature change of one degree Celsius is equivalent to a temperature change of one degree Kelvin. Tk = TC +273.15. We can observe that the relationship between the two temperature scales is linear and that its slope is the same for each.

The degree Celsius, denoted by the symbol °C, is the unit of temperature in Celsius and is by definition equal in magnitude to the kelvin unit. A temperature difference or interval can be stated in either kelvin or degrees Celsius, and in both cases the numerical value of the temperature difference is the same. However, the relationship between the numerical value of a thermodynamic temperature represented in kelvin and a Celsius temperature expressed in degrees Celsius exists.

To learn more about temperature in kelvin and Celsius from given link

https://brainly.com/question/10497952

#SPJ4

The magnitude of the net electric field is 2.7 x 10^9 N/C, and the direction is away from the positive charge and towards the negative charge.

The magnitude of the electric field due to the positive charge at the midpoint is:

E = k * q / r^2

E = (9.0 x 10^9 N * m^2/C^2) * (20.0 x 10^-6 C) / (0.20 m)

E = 4.5 x 10^9 N/C

The magnitude of the electric field due to the negative charge at the midpoint is:

E = k * q / r^2

E = (9.0 x 10^9 N * m^2/C^2) * (-8.00 x 10^-6 C) / (0.20 m)

E = -1.8 x 10^9 N/C

The direction of the electric field due to the positive charge is away from the charge, and the direction of the electric field due to the negative charge is towards the charge.

To find the net electric field, we add the vectors of the two electric fields. Since the vectors are in opposite directions, we subtract the negative vector from the positive vector.

E_net = E_positive + E_negative

E_net = (4.5 x 10^9 N/C) + (-1.8 x 10^9 N/C)

E_net = 2.7 x 10^9 N/C

The magnitude of the net electric field is 2.7 x 10^9 N/C, and the direction is away from the positive charge and towards the negative charge.

Learn more about the magnitude of the net electric field here: https://brainly.com/question/29679588

#SPJ4

According to the given statement The ships average acceleration is 2790 km/hr².

Rate of change in both speed and direction of motion over time. A point or object going straight forward is accelerated when it accelerates or decelerates. Even though the speed is constant, motion on a circle accelerates because of direction is always shifting

We know that from newton's equation,

v² + u² = 2as

S = ut + 0.5 at²

Where, v = final speed

           u = initial speed

           a = acceleration

           S = distance covered

            t = time taken

Given, u = 0

So the equations becomes:

v² = 2as

S = 0.5 at²

Using these equations we get:

v² = 2a(0.5)at²

v² = a²t²

v = at

v/t = a

Given,  v = 93 km/hr

          t = 2 min = 2/60 hr

Putting these values in above equation we get, a = 2790 km/hr²

So, the ships average acceleration is 2790 km/hr²

To know more about acceleration visit:

https://brainly.com/question/12550364

#SPJ1

The components of an electrical circuit represented by the model are as follows:

The figure models resistance in a circuit because just as resistance in a circuit opposes the flow of current, the load resists the movement of the man.

An electrical circuit is a complete path that is provided for the flow of electric current.

Tue components of an electric circuit includes:

Learn more about electrical circuits at: https://brainly.com/question/2969220

#SPJ1

The potential difference,  acting over a distance of 2.5 cm is 1.4*10^-12V.

The potential actually grows as you get farther away from the charge, becoming less negative as you get closer to it and eventually reaching zero. The potential for both positive and negative charges is zero at infinite distances from the charge.

The energy that a body has because of its location or deformation is known as potential energy. Both the body's bulk and the height to which it is lifted play a role.

Given:

Distance (d) = 2.5cm = 0.025 m

For an electron,

[tex]m= 9.109*10^-31kg[/tex]

[tex]q=1.602*10^-19C[/tex]

We isolate the electric field:

[tex]E=\frac{mg}{q}[/tex]

[tex]g=9.8 m/s^2[/tex]

[tex]E=\frac{(9.109*10^-31kg)(9.8m/s^2)}{1.602*`10^-19C}[/tex]

[tex]E=5.5723*10^-11V/m[/tex]

Electric potential,

[tex]E=\frac{V}{d}[/tex]

[tex]V=Ed[/tex]

[tex]V= (5.5723*10^-11V/m)(0.025m)[/tex]

[tex]V=1.4*10^-12V[/tex]

To know more about potential difference visit:

https://brainly.com/question/24142403

#SPJ4

The energy stored in the capacitor is 0.045 mJ. Under DC conditions, the capacitors will be open-circuited.

Energy stored in a capacitor can be calculated by

E = ½ CV²

Where

The picture of circuit in the attached plot is in the attachment.

Find the energy stored in the capacitor under DC conditions!

We have

Under DC (Direct Current) conditions, the capacitors will be open-circuited. It means that there is no current will flow through the 20 Ω resistor. So, I across the 10 Ω resistor is the same as I source.

See the picture below in the attachment!

The voltage across the 10 Ω resistor is

V = IR

V = 3(10)

V = 30 V

The voltage across the capacitor is the same as the voltage across the 10 Ω resistor.

Vc = V = 30 V

The energy stored would be

E = ½ C Vc²

E = ½ (0.1)(10⁻⁶)(30)²

E = ½ (10⁻⁷)(900)

E = 450 × 10⁻⁷

E = 0.045 × 10⁻³

E = 0.045 mJ

Hence, the energy stored in the capacitor under DC conditions is 0.045 mJ. The correct option is (c).

Learn more about energy stored in the circuit here:

brainly.com/question/14103175

#SPJ4

The potential at the fourth point will be [tex]\frac{k^3Q}{\sqrt{L}}[/tex]

Let q1= -2Q and q2 = 6Q. ( k.)

What does charge number three's value, q3, equal?

To remedy the issue, the charges' orientation is also necessary.

You might try using the formula (kQ/r) to get the potential at the fourth corner.

Electric potential is a scalor, therefore adding the values from the three sites is as simple as adding them all together.

The effort required to transfer a unit charge against an electric field from a reference point to a specified spot. Earth is typically chosen as the reference point, however, any location beyond the range of the electric field charge can be utilized. potential electricity.

for instance, q1=-Q, L from the 4th point

q2=3Q and the fourth point's root is L.

The solution to q3= Q L from the fourth point is just [tex]-\frac{kQ}{L} + \frac{k^3Q}{\sqrt{L}} +\frac{kQ}{L} = \frac{k^3Q}{\sqrt{L}}[/tex]  (at the fourth point)

For more questions on Electric potential

https://brainly.com/question/14306881

#SPJ4

The missing diagram is attached below:

Yes, effective thermal conductivity of an insulation system accounts for heat transfer by conduction.

What do you mean by thermal conductivity?

Thermal conductivity is a property of a material that describes its ability to conduct heat. It is typically measured in units of watts per meter per kelvin (W/m·K). The thermal conductivity of a material is affected by various factors, such as temperature, pressure, and the presence of impurities or defects.

The effective thermal conductivity of an insulation system is a measure of its ability to resist heat transfer by conduction. It does not take into account other forms of heat transfer, such as convection or radiation.

The value of the thermal conductivity is typically measured by determining the rate of heat flow through a sample of the insulation material under specific conditions of temperature and pressure.

The lower the thermal conductivity, the better the insulation's ability to resist heat transfer by conduction.

Hence, effective thermal conductivity of an insulation system accounts for heat transfer.

To learn more about thermal conductivity from the given link:

https://brainly.com/question/11213835

#SPJ4

Charging by Contact is positive. On object B, a positive charge will remain.

The fundamental physical property of matter, electric charge, exerts a force when kept in an electric or magnetic field. A magnetic field is produced by a moving electric charge, and an electric charge is associated with an electric field. Magnetic and electric fields combine to form the electromagnetic field. The interaction of the charges results in the electromagnetic force, which is the fundamental force in physics. Throughout this session, tell us about electric charges, their types, and their traits.

A scalar quantity is an electric charge. Only when a quantity complies with the laws of vector addition, such as the triangle law of vector addition and the parallelogram law of vector addition, can it be said to be a vector in addition to having a magnitude and direction. In the case of an electric current, the resultant current of these two currents at a junction is an algebraic sum rather than a vector sum. Therefore, despite having magnitude and direction, an electric current is a scalar quantity.

Learn more about Charge from given link

https://brainly.com/question/18102056

#SPJ4

An iceberg is formed by the broken part of a large glacier that floats into the sea. The iceberg is composed of fresh water, just like the glaciers or ice in the North Pole. Since, freshwater is less thick than salty seawater, icebergs float in the water.

When chunks of ice break off the end of a glacier that is flowing into ocean, icebergs are created.

Since, seawater has a slightly higher density than ice, the iceberg floats with the majority of its mass below the surface. A cork, on the other hand, floats quite near to the water's surface due to its density, which is around 20% that of water.

As moving icebergs are dangerous, they have never been a main supply of drinking water. Freshwater is released by melting glaciers and icebergs, which also lowers the salinity of the surrounding sea.

To know more about icebergs:

https://brainly.com/question/11430987

#SPJ4

When the proton passed through magnetic field then the angle between the proton velocity and the field is 49° degrees.

Given

Speed v = 4.00 m/s

Mg field =1.7 T

Force = 8.21  10-3  N

Given:- Velocity of the particle = 4.00x10m/3. 2 Magnitude of the magnetic field B= 1.701.

Force experienced by the particle: 8.20x10¹³N.

To find: The between the particle velocity and field. angle a

We know that :- F= q(√xB)

9 (VBSino) 928 - Sina

Sina = 8.20×10-13 1.6×10-19×4×10 6 x 1.70 = 0.7536.

Sin a = 0.7536. ~ Sin 0 = 0.754

a = sin' (0.7536)

a = 49°

we have a point charge q0 located at r and a set of external charges conspire so as to exert a force F on this charge. We can define the electric field at the point r by: E =Fq0

The (vector) value of the E field depends only on the values and locations of the external charges, because from Coulomb’s law the force on any “test charge” proportional to the value of the charge. However to make this definition really kosher we have to stipulate that the test charge q0 is “small”; otherwise its presence will significantly influence the locations of the external charges.

The electric field is a vector. we can see that its SI units must be It follows from Coulomb’s law that the electric field at point r due to a charge q located at the origin is given by E = kq where r is the unit vector which points in the same direction as r.

To know more about proton velocity here

https://brainly.com/question/24761394

#SPJ4

In Glaciers water tends to live extra than the longest time and, within the ecosystem, the water turns to live for the shortest time. due to the fact in glaciers water anticipated residence time is approx. 3000 years and in Lake’s water be saved approx. a hundred years. Water house time in the river is approx. for weeks to months and water residence, time in the surroundings is approx. for 7 - 9 days at best.

Glaciers are big, gradual-shifting masses of ice that collect over thousands of years from the compaction of snow. Glaciers are discovered in lots of mountainous and polar areas around the sector, and they're the largest freshwater reserves around the globe. Glaciers act as a herbal garage of water, allowing it to be launched slowly over the years.

As temperatures increase, glaciers are melting at an alarming fee. This melting causes the discharge of large amounts of water, which can weigh down ecosystems and result in flooding, as well as boost sea tiers. The water from melting glaciers also impacts the ocean’s salinity and chemistry, main to changes in the entire marine atmosphere. As glaciers hold to soften at an accelerated price, the availability and exceptional of our water sources will be affected.

To learn more about Glaciers water trends visit here:

brainly.com/question/29843990

#SPJ4

Complete Question:

Rank the following reservoirs by the amount of time that water tends to reside in them. (from longest to shortest)

A). Oceans

B). Rivers

C). Lakes

D). Glaciers

E). Atmosphere

The 6,100 N is the centripetal force on the hammer when it has a tangential speed of 31.95 m/s.

Any force that induces a shift in velocity direction toward the center of a circular motion is referred to as a centripetal force. Centripetal force is caused by the part of the force that is perpendicular to the velocity.

Centripetal force is a force that operates on a body traveling in a circle and is pointed in the direction of the body's center of mass. It is computed using the formula:

F = mv^2/r

where m is the mass, v is the velocity and r is the radius.

F = 7.26(31.95)^2 / (1.215) = 6100 N

To know more about centripetal force visit;

https://brainly.com/question/11324711

#SPJ4

The reason why a yellow colored object looks white in a dimmed light or low intensity of light the colors wavelength have the colors more farther it means it's getting more dimmed.

The wavelengths of sound waves are similar to the size of objects around you, but the wavelength of light waves are much shorter. As a result, you can hear people talking in a room with an open door even though you can’t see them.

The amount of diffraction or bending of the wave depends on the size of the obstacle the wave encounters. If the size of the obstacle is much larger than the wavelength, very little diffraction occurs. Then there is a shadow behind the object where there are no waves.

As the wavelength increases compared with the size of the obstacle, the amount of diffraction increases. The amount of diffraction is greatest if the wavelength is much larger than the obstacle.

To know more about wavelengths here

https://brainly.com/question/2429109

#SPJ4

A buildup of nitrogen in the atmosphere can result in pollutants like ozone and ammonia, which can reduce visibility, interfere with plant growth, and harm our capacity to breathe.

"Human nitrogen additions to the soil, in the form of fertilisers, strengthen the greenhouse effect: approximately 60% of nitrous oxide is emitted from fertilised fields, manures, and other agricultural sources," claims Mahesh Pradhan, a nutrient pollution specialist with the UN Environment Programme (UNEP).

AUSTRIA (Thomson Reuters Foundation) - Scientists said on Wednesday that rising nitrogen-based fertiliser use is raising emissions of a greenhouse gas 300 times more potent than carbon dioxide, endangering attempts to keep global warming within globally set limits.

With over 75% of all greenhouse gas emissions and almost 90% of all carbon dioxide emissions coming from fossil fuels like coal, oil, and gas, they are by far the biggest cause of climate change in the world.

To learn more about nitrogen refer to:

https://brainly.com/question/2420621

#SPJ4

The stars in the center of the Milky Way galaxy is approximately 94.5 billion stars. The result is obtained by dividing the mass of the galactic center by the mass of the Sun.

The number of stars in a galaxy can be estimated by dividing the mass of galactic center by the mass of a typical star.

In the Milky Way,

Suppose that the Sun is a typical star with a typical mass and the galactic matter is made up of stars. Find the approximate number of stars in the center of the galaxy!

From the scientific data, the mass of the Sun is 1.99 × 10³⁰ kg.

The number of stars is approximately

N = Mass of the galactic center / Mass of the Sun

N = 1.88 × 10⁴¹ kg / 1.99 × 10³⁰ kg

N = 0.945 × 10¹¹

N = 94.5 × 10⁹

N = 94.5 billion stars

In the center of Milky Way, the number of stars is around 94.5 billion stars.

Learn more about stars in a galaxy here:

brainly.com/question/26063716

#SPJ4

Answer:

Tt can be calculated by copy

Answer:

6.9 m/s

Explanation:

This is a conservation of momentum problem, so the total momentum before the collision must equal the total momentum after the collision.

P = mv

m1v1 + m2v2 (before) = m1v1 + m2v2 (after)

(3250kg)(25.0 m/s) + (2820 kg)(0m/s) = (3250 kg)(19.0 m/s) + (2820 kg)(v2)

Now you can solve for the v of the car after the collision:

81250 kg·m/s + 0 = 61750 kg·m/s + (2820 kg)v2

19500 kg·m/s = (2820 kg)v2

v2 = 19500 kg·m/s / 2820 kg = 6.9 m/s

The proper answer is that a force of 16 N net would be needed to accelerate the same item at 1.0 m/s2.

Newton's second law of motion condenses these relationships. The answer to the acceleration equation above can be written as Net Force = Mass Acceleration, or F = m a.

You know that force(F) & acceleration(a) are connected through mass(m),

F=ma

Here you have:

10 = 5 m

so, m = 10/5 = 2 Kg

Then if you have a = 8 m/s^2

you get:

F=2×8=16 N

Force = 16N

To know more about accelerate visit:

brainly.com/question/12550364

#SPJ4

Answer:
For this I believe that your working on Ocean layers in science physics
There are actually 5 ocean zones or layers. (here they are in order)
1. Sunlight zone
2. Twighlight zone
3. Midnight zone
4. Abyssal Zone
5. Hadal zone
As a rephrase of the question I believe you meant to say
What are the marine zones?
Please correct me if wrong!!