A disk is rotating at 2 rev/sec. The disk has a moment of inertia of 25 kg m2. If an identical, non-rotating disk, which has a moment of inertia exactly ½ as large, is dropped onto the rotating disk, what will be the new rotational speed of the combined rotating object?

Forklift attachments are not integral parts of the forklift equipment but are used to hold a load or loads. Examples of forklift attachments include fork extensions, side shifters, clamps, rotators, and pallet handlers.

A forklift is a piece of heavy equipment that is primarily used to lift and move materials over short distances. It typically consists of a power-operated platform, called a pallet, that can be raised and lowered using hydraulic cylinders. The pallet is attached to a set of forks that can slide under a load, allowing it to be lifted and moved.

Forklifts are commonly used in warehouses, manufacturing facilities, and construction sites, where they can quickly and efficiently move heavy materials from one location to another. They are also used to load and unload trucks and shipping containers. Forklifts come in a variety of sizes and configurations, ranging from small, electric-powered models for indoor use, to large, diesel-powered models for outdoor applications.

To learn more about Forklift visit here:

brainly.com/question/30168076

#SPJ4

Answer:

True.

Explanation:

Clinical psychologists are mental health professionals who work with individuals, couples, families, and groups to address psychological and emotional problems that affect their daily lives. They are concerned with a wide range of issues, including but not limited to problems of adjustment, such as anxiety, depression, stress, relationship difficulties, and other emotional and behavioral issues. Clinical psychologists help their clients identify and understand their problems, and work with them to develop coping strategies and make positive changes in their lives.

Answer:

TRUE

Explanation:

Clinical psychologists are mental health professionals who work with individuals, couples, families, and groups to address psychological and emotional problems that affect their daily lives. They are concerned with a wide range of issues, including but not limited to problems of adjustment, such as anxiety, depression, stress, relationship difficulties, and other emotional and behavioral issues. Clinical psychologists help their clients identify and understand their problems, and work with them to develop coping strategies and make positive changes in their lives.

The substance that would be most likely to provoke a response similar to the barium dance is c. lead.

Barium dance is used to describe the movements of the body that can occur when a person is exposed to a high level of barium. Barium is a heavy metal that can be toxic in large amounts, and exposure can occur through ingestion, inhalation, or skin contact.

Other heavy metals such as lead, mercury, can also cause similar symptoms when a person is exposed to high levels. Additionally, exposure to certain chemicals such as pesticides, solvents, and industrial pollutants can also cause neurological symptoms similar to those seen in barium.

Learn more about barium on

https://brainly.com/question/29344018

#SPJ1

When a person is exposed to high quantities of other heavy metals like lead, mercury, and cadmium, comparable symptoms can also be experienced. Furthermore, neurological symptoms resembling those of barium can also be brought on by exposure to specific substances including insecticides, solvents, and industrial pollutants.

It's critical to remember that any potential exposure to these drugs needs to be taken seriously, and if you think you may have been exposed, you should get medical help right once.

based on the information in the passage, which of these substances would be most likely to provoke a response similar to the barium dance

a. oxygen

b. nitrogen

c. lead

d. sulphur

Answer: you are right, its entodermic

Explanation:

The enthalpy of the products in an entodermic reaction is greater than the enthalpy in the reactants.

The equivalent capacitance of this combination is 9.375 μF, or 9.375 × 10⁻⁶ F in scientific notation.

What is capacitor ?

A capacitor is an electronic component that stores electrical energy in an electric field. It consists of two conductive plates separated by a non-conductive material, called a dielectric. When a voltage is applied to the capacitor, electric charge builds up on the plates, creating an electric field between them. The amount of charge that can be stored on the plates depends on the capacitance of the capacitor, which is determined by the size and spacing of the plates, as well as the properties of the dielectric material.

When capacitors are in series, their effective capacitance is given by:

1/C_series = 1/C_1 + 1/C_2 + ...

In this case, we have two capacitors in series, with capacitances of 25 μF and 15 μF:

1/C_series = 1/25μF + 1/15μF

1/C_series = (15 + 25)/(1525μF²)

1/C_series = 40/(375*μF²)

C_series = 375*μF²/40

C_series = 9.375 μF

Therefore, the equivalent capacitance of this combination is 9.375 μF, or 9.375 × 10⁻⁶ F in scientific notation.

To know more about capacitor visit :-

https://brainly.com/question/27753307

#SPJ1

Based on the information given, we can assume that there are two alleles for a particular gene in a population: allele "A" with frequency of 0.19 and allele "a" with frequency of 0.81.

What is the frequency?

If the population is in Hardy-Weinberg equilibrium, then the allele frequencies will remain constant from generation to generation.

According to the Hardy-Weinberg equation, the expected genotype frequencies can be calculated as follows:

What is genotype?

These genotype frequencies should remain constant in future generations as long as the assumptions of the Hardy-Weinberg equilibrium are met, such as random mating, no migration, no mutation, no natural selection, and large population size.

To know more about genotype, visit:

https://brainly.com/question/29156144

#SPJ1

a. more When a water heater is rated to operate at 240 volts but is operated at 208 volts, the lower voltage means that the heating element in the water heater will not receive as much power as it is designed.

Power is the rate at which work is done or energy is transferred, typically measured in watts or horsepower. It represents the amount of energy used or transferred per unit time.

Mathematically, power is defined as the product of force and velocity, or the product of current and voltage. The unit of power is the watt (W), which is equal to one joule of energy per second.Power is an important concept in physics, engineering, and technology. It is used to describe the output of engines, motors, generators, and other devices that convert energy from one form to another. In everyday life, power is used to measure the rate at which electricity is consumed by appliances and electronics, and to compare the performance of different machines and tools.

To know more about power  visit :

https://brainly.com/question/14379882

#SPJ1

When[tex]P = 0, Q[/tex]must be in the range between [tex]4.3 kN and 12.9 kN[/tex] to prevent either cable from becoming slack.

We may examine the forces operating on the beam to find the range of values for Q. The sum of the vertical forces must be zero when [tex]P = 0,[/tex]which indicates that the beam is in equilibrium. Our result is the equation:

[tex]Q + 7.5 - 3 - 4 = 0[/tex]

When Q is solved for, we obtain [tex]Q = 0.5 kN to 12.9 kN.[/tex] To prevent either wire from going slack, we must also ensure that both cables are under positive stress. We can accomplish this by searching for the extreme values of Q in each cable's tensions.

[tex]Q = 0.5 kN[/tex]results in a positive 7.5 kN tension in cable AB. However, cable DE's tension is negative[tex](-2.5 kN)[/tex], indicating that cable DE is under tension. is loose.

[tex]Q = 12.9 kN[/tex] results in a positive [tex]3.4 kN[/tex] tension in cable DE. Cable AB, however, has negative tension [tex](-5.4 kN),[/tex] indicating that it is slack.

The range of Q values that satisfy the requirement that neither cable sags when [tex]P = 0 is 4.3 kN to 12.9 kN.[/tex]

learn more about cables here:

https://brainly.com/question/14300574

#SPJ4

Answer:

Explanation:

To find the speed of the tsunami:

Speed = Distance / Time

Converting the distance from miles to meters and the time from hours to seconds:

Distance = 6500 miles × 1609.34 m/mile = 10,460,210 m

Time = 17 hours × 3600 s/hour = 61,200 s

Speed = 10,460,210 m / 61,200 s ≈ 171 m/s

To convert the speed to miles per hour:

Speed = 171 m/s × 2.24 mi/hr / 1 m/s ≈ 383 mi/hr

So the speed of the tsunami is approximately 171 m/s or 383 mi/hr.

To find the average frequency:

Wave speed = frequency × wavelength

The wavelength is twice the width of the wave:

Wavelength = 2 × 22 m = 44 m

Frequency = wave speed / wavelength

Frequency = 171 m/s / 44 m ≈ 3.9 Hz

So the average frequency of the tsunami is approximately 3.9 Hz.

The nuclear family is considered the most essential family unit because it is the family unit with the most fundamental relationships. that's why the Given statement is False.

In a nuclear family, parents and their children live in a household. A nuclear family is a type of family structure that consists of a pair of adults and their children, but not grandparents who live in the family.

It is also called the traditional family, and it is considered to be the basic family unit.A nuclear family is a small family consisting of two parents and their children.

A nuclear family is often known as the basic family unit since it is a family structure consisting of two parents and their children. It is also considered the most prevalent family structure in many countries around the world.

for such more question on nuclear family

https://brainly.com/question/14512503

#SPJ11

The value of [tex]K_c[/tex] for the given reaction is  1.2 × [tex]10^{17}[/tex].

Hence, the correct option is E.

The given reaction is,

2HI(g) + [tex]Cl_2[/tex](g) ⇌ 2HCl(g) + [tex]I_2[/tex](s)

As per the given data:

[tex][HCl]_{eq}[/tex] = 0.13 M,

[tex][HI]_{eq}[/tex] = 5.6 × 10-16 M,

[[tex]Cl_2[/tex][tex]]_{eq}[/tex] = 0.0019 M

The expression for the equilibrium constant, [tex]K_c[/tex] is given as:

[tex][HCl]^2[I_2]\:/\:[HI]^2[ Cl_2][/tex]

A chemical reaction enters a state of equilibrium or equilibrium concentration when the rate of forward reaction equals the rate of backward reaction.

Substitute the given equilibrium concentrations to obtain the equilibrium constant, [tex]K_c[/tex];

[tex]K_c[/tex] = [tex][0.13]^2[5.6 \times 10^{-16}]\: /\:[0.0019]^2[/tex]

[tex]K_c[/tex]  = 1.2 × [tex]10^{17}[/tex]

The value of [tex]K_c[/tex] for

2HI(g) + [tex]Cl_2[/tex](g) ⇌ 2HCl(g) + [tex]I_2[/tex](s) is 1.2 × [tex]10^{17}[/tex]

So option E right choice.

for such more question on equilibrium concentrations

https://brainly.com/question/13414142

#SPJ11

Explanation:

The disparity between women's rights in urban and rural areas in Eritrea can be attributed to various factors such as cultural beliefs, traditional values, lack of education, and access to resources. Urban areas generally have more access to education, healthcare, and job opportunities, which can empower women and increase their participation in society. However, rural areas are often more traditional and conservative, and women may face more barriers to accessing education, healthcare, and employment opportunities.

Laila's conflict about the practice of female genital mutilation for her daughter is likely due to her cultural and social upbringing. While she may recognize the physical and psychological harm that the practice can cause, she may also feel pressure to conform to traditional values and beliefs. Additionally, there may be social consequences for not following the practice, such as being ostracized from the community.

Beyond female genital mutilation, women in Eritrea face various challenges to their rights and equality, including limited access to education, gender-based violence, and discrimination in employment and political representation. Bringing about change would require a multi-faceted approach, including education and awareness-raising campaigns, legal and policy reforms, and empowerment programs for women. It would also require addressing the underlying societal and cultural norms that perpetuate gender inequality.

Comparing my diet to the food pyramid, I can see that my diet is similar in some ways and different in others.

For breakfast, I had a bowl of oatmeal with almonds, blueberries, and a drizzle of honey. For lunch, I had a turkey sandwich with lettuce, tomato, and avocado on whole wheat bread. I also had a side of carrot sticks and hummus. For dinner, I had grilled salmon with roasted sweet potatoes and broccoli. For snacks throughout the day, I had an apple, a handful of grapes, and a small serving of dark chocolate.

Comparing my diet to the food pyramid, I can see that my diet is similar in some ways and different in others. For example, my breakfast of oatmeal with blueberries is a good source of whole grains and fruits, which are both recommended in the food pyramid. Similarly, my lunch of turkey sandwich on whole wheat bread with vegetables provides a good balance of protein, whole grains, and vegetables. My snack of fruit, such as apples and grapes, is also recommended in the food pyramid as a healthy option for snacking.

However, there are also some differences in my diet compared to the food pyramid. For instance, my diet did not include any dairy products or legumes, which are both recommended in the food pyramid. Additionally, my dinner did not include any grains, which are also recommended in the food pyramid. Instead, I had sweet potatoes, which are a good source of complex carbohydrates.

Learn more about food on:

https://brainly.com/question/25884013

#SPJ1

The probability that an average of 22 shields will absorb more than 17.1 J/kg is approximately 0.3085.

where X is the random variable representing the energy absorbed per kilogram of the shield.

To calculate this probability, we need to know the distribution of X.

From the given information, we know that X follows a normal distribution with mean μ = 16.8 J/kg and standard deviation σ = 0.6 J/kg.

Thus, we can standardize X as follows:

Z = (X - μ)/σZ ~ N(0, 1)

P(X > 17.1) = P((X - μ)/σ > (17.1 - μ)/σ)

                = P(Z > (17.1 - 16.8)/0.6)

                = P(Z > 0.5)

Using a standard normal table, we can find the probability that Z > 0.5 to be 0.3085 (rounded to 4 decimal places).

Therefore, the probability that an average of 22 shields will absorb more than 17.1 J/kg is approximately 0.3085.

for such more question on probability

https://brainly.com/question/13604758

#SPJ11

The constant acceleration of the train is 50/9 m/s².

The two balls will collide at a height of approximately 10.204 meters above the ground.

Using the kinematic equations of motion, we have:

distance = initial velocity * time + 1/2 * acceleration * time^2

For the first phase of acceleration, the initial velocity is zero, the time is 5 minutes = 300 seconds, and the distance traveled is unknown. So we have:

d1 = 0 + 1/2 * a * (300)^2

For the second phase of constant speed, the initial velocity is v, the time is 5 minutes = 300 seconds, and the distance traveled is also unknown. So we have:

d2 = v * 300

For the third phase of deceleration, the initial velocity is v, the time is also 5 minutes = 300 seconds, and the distance traveled is again unknown. So we have:

d3 = v * 300 + 1/2 * (-a) * (300)^2

The total distance traveled is the sum of these three distances:

distance = d1 + d2 + d3 = 1/2 * a * (300)^2 + v * 600 - 1/2 * a * (300)^2 = v * 600

Since the total distance traveled is given as 10 km = 10000 m, we have:

v * 600 = 10000

Solving for v, we get:

v = 10000/600 = 50/3 m/s

Now we can use the second equation above to find a:

d2 = v * 300 = (50/3) * 300 = 5000 m

Therefore, the constant acceleration of the train is:

a = 2 * (5000 - 1/2 * a * (300)^2) / (300)^2 = 50/9 m/s^2

The constant acceleration of the train is 50/9 m/s^2.

Problem 2: The height of the first ball dropped is given as 10m. Let's assume the height of the collision point is h meters above the ground.

Using the kinematic equation for free fall, we have:

h = 10 + 1/2 * g * t^2

where g is the acceleration due to gravity, which is approximately 9.81 m/s^2, and t is the time it takes for the second ball to reach the collision point after being thrown upwards.

The initial upward velocity of the second ball is 10 m/s, and we know that at the collision point, its velocity will be zero, since it will have reached its maximum height and will be momentarily at rest before falling back down.

Using the kinematic equation for motion with constant acceleration, we have:

0 = 10 + (-g) * t

Solving for t, we get:

t = 10/g = 10/9.81 seconds

Substituting this value of t into the first equation, we get:

h = 10 + 1/2 * 9.81 * (10/9.81)^2

Simplifying, we get:

h = 10.204 m

The two balls will collide at a height of approximately 10.204 meters above the ground.

Learn more about acceleration on;

https://brainly.com/question/14344386

#SPJ1

Answer: exothermic, chemical bonds between oxygen atoms.

Explanation:

Correct, this is due to the fact that glass has a higher refractive index than air.

We are aware that laser light travels in a straight line, but it bends when it passes through a glass slab. Refraction of light describes the way a laser beam bends as it passes through transparent media.

Light slows down when it enters a material with a higher refractive index, such as glass from air. When facing the straight line, the light sways. When light penetrates a material with a lower refractive index, it moves more quickly.

To know more about Refraction visit:-

https://brainly.com/question/17231321

#SPJ1

The sequence of grades of metamorphism that may be encountered moving west to east from Ohio to the crystalline core of the Appalachians is: low grade, then intermediate grade, then high grade.

Metamorphism is the process by which a rock is changed by heat and pressure. When rocks are subjected to increased heat, pressure, and/or chemically active fluids, they undergo metamorphism.

Metamorphic rocks are formed as a result of this process. During metamorphism, the mineral composition and texture of a pre-existing rock are altered.

To summarize, the sequence of grades of metamorphism that may be encountered moving west to east from Ohio to the crystalline core of the Appalachians is low grade, intermediate grade, and then high grade.

for such more question on metamorphism

https://brainly.com/question/986818

#SPJ11

Biomass energy refers to energy that is derived from organic matter, such as wood, crop residues, and even municipal solid waste. This organic matter can be replenished through biogeochemical cycles.

Organic products, such as fruits, vegetables, meat, and dairy, are grown or raised without the use of synthetic chemicals, fertilizers, or hormones. Organic certification is granted by regulatory bodies that ensure that the products meet strict organic standards.

In addition to its benefits for the environment and personal health, organic farming and food production also promote animal welfare and sustainable agriculture practices. However, organic products may be more expensive than conventionally grown products due to the increased cost of production and certification.

To know more about  organic visits :

https://brainly.com/question/12825206

#SPJ1

The magnitude of the current through the resistor R4 just after the switch is closed so the total current 0.06647 A.

(1)

The capacitor acts as short circuit just after the switch is closed.

The equivalent resistance is,

[tex]R_{eq}=R_1+R_2 || R_3+R_4\\=R_1+\frac{R_2R_3}{R_2+R_3}+R_4\\=(36)+\frac{(36)(77)}{(36)+(77)}+(120)\\[/tex]

= 180.53 Ω

Use Ohm's law to solve for total current.

V = IR

I= V/ R

[tex]=\frac{12 V} {180.53}[/tex]

= 0.06647 A

(2)

The capacitor is a break in the circuit after long time has passed since the switch was closed. The potential across capacitor is same as potential across R..

The equivalent resistance of the circuit is,

[tex]R_{eq}=R_1+ R_3+R_4[/tex]

=36Ω+77Ω+120Ω

= 233 Ω

Use Ohm's law to calculate I.

V = IR

I= V / R_eq

[tex]=\frac{12 V} {233}[/tex]

= 0.0515 A

Use Ohm's law to solve for Voltage [tex]V_3[/tex].

[tex]V_3=IR_3[/tex]

=(0.0515 A) (772)

= 3.97 V

The charge on the capacitor is,

C= Q/V

Q(∞)=CV

[tex]=(67\mu F (10^{-6} F/1 \mu F) (3.97 V)\\[/tex]

= 2.657× [tex]10^{-4} C[/tex]

(3)

The expression of charge of the capacitor while discharging is,

[tex]Q(t)=Qe^ {\frac{1}{RC}}[/tex]

The total resistance is,

[tex]R_{eq}=R_2+ R_3[/tex]

= 36 Ω + 77 Ω

= 113 Ω

The charge after 555 us is,

Q(555 us)=(2.657×10^-4 C)exp[tex](\frac{(-555 us } {(113)(67 \mu F)})[/tex]

=2.47×10 C

(4)

Use Ohm's law to solve for potential difference on the combination of R2 and R.

[tex]V_{23} = IR_{23[/tex]

[tex]=(0.06647A)\frac{(36)(77)}{(36)+(77)}\\=1.63 V[/tex]

= 1.63 V

The current [tex]I_C_{max[/tex] is,

V = IR

[tex]I_C_{max}=\frac{V_{23}} {R_{2}}[/tex]

= 1.63 V/ 36Ω

= 4.53×10^-2 A

(5)

The maximum potential by capacitor is, V = 3.97 V

Use Ohm's law to solve for current.

[tex]I_C_{max[/tex]=V/R

=3.97 V/113 Ω

=3.51×10^-2 A

Current refers to the flow of electric charge through a conductor. It is measured in units of amperes (A), which represent the rate at which electric charge flows through a circuit. The flow of current is driven by a difference in electric potential, or voltage, between two points in the circuit. There are two types of current: direct current (DC) and alternating current (AC). Most electronic devices and appliances use DC, while AC is typically used to transmit electricity over long distances.

Understanding current is crucial to many fields, including electrical engineering, physics, and electronics. It is also important for everyday life, as we rely on electricity to power our homes, cars, and devices. Properly managing current is critical for ensuring safety and avoiding electrical hazards.

To learn more about Current visit here:

brainly.com/question/23323183

#SPJ4

The centre of mass is located at the left end of the boat, where the person and their dog are sitting.

A person (mass mp) and their dog (mass md) are sitting together at the left end of a boat that has a length of l.

The boat will have a centre of mass that is determined by the following equation:

[tex]xcm = (m_p x p + m_d x d) / (m_p + m_d)[/tex]

Where:

xcm = the x-coordinate of the centre of mass
mp = the mass of the person
xp = the x-coordinate of the person
md = the mass of the dog
xd = the x-coordinate of the dog

Since the person and their dog are sitting together at the left end of the boat, we can assume that xp = xd = 0. Therefore, the x-coordinate of the centre of mass can be calculated as:

[tex]xcm = (m_p x 0 + m_d x 0) / (m_p + m_d)

xcm = 0[/tex]

This means that the centre of mass is located at the left end of the boat, where the person and their dog are sitting.

for such more question on centre of mass

https://brainly.com/question/28021242

#SPJ11

Answer:

119,2 см³

Explanation:

по формуле Клопейрона (P1×V1):T1=(P2×V2):T2

если из этой формулы найти V2, ответ будет равен примерно на 119,2 см³

The speed of the ball when it leaves the gun is approximately 17.66 m/s.

To determine the speed of the ball when it leaves the gun, we can use the principle of conservation of energy. At the moment when the trigger is pulled, the spring has a potential energy equal to:

U = (1/2) k x²

where k is the spring constant and x is the amount by which the spring is compressed from its unstretched length. Using the given values, we have:

U = (1/2) (20 N/m) (0.0125 m)² = 1.5625 mJ

When the spring is released, this potential energy is converted into kinetic energy of the ball, as well as work done against friction. The work done against friction is equal to:

W = f_friction x

where f_friction is the frictional force between the ball and the barrel, and x is the distance that the ball moves along the barrel. Using the given values, we have:

W = (0.02 kg) (9.81 m/s²) (0.20) (0.05 m) = 0.01962 J

The kinetic energy of the ball is equal to the difference between the potential energy of the spring and the work done against friction:

K = U - W = 1.5625 mJ - 0.01962 J = 1.5429 J

The speed of the ball when it leaves the gun is equal to the:

v = sqrt(2K/m)

where m is the mass of the ball. Using the given value of 20 g, we have:

m = 0.02 kg

Substituting the values and evaluating the expression, we get:

v = sqrt(2(1.5429 J)/(0.02 kg)) = 17.66 m/s

Therefore, the speed of the ball when it leaves the gun is approximately 17.66 m/s.

learn more about potential energy here

https://brainly.com/question/14427111

#SPJ1

To find:-

Answer:-

We are here given that two aeroplanes are travelling in opposite directions to each other that is North and South .

Speed to pilot traveling towards north is ,

[tex]\implies v_N = 400\ km/hr \\[/tex]

Speed of pilot traveling towards south is ,

[tex]\implies v_S = 300\ km/hr \\[/tex]

Since they are traveling opposite directions the relative speed will be the sum of their speeds that is ,

[tex]\implies v_{relative} = 300km/hr + 400 km/hr \\[/tex]

[tex]\implies \underline{\underline{ v_{relative}= 700km/hr}} \\[/tex]

Hence the relative speed is 700km/hr .

and we are done!

the inevitable process causing increase in disorder in the universe and loss in useful energy is called entropy.

Answer:

Explanation:

As the book fell to the ground, its potential energy decreased, and its kinetic energy increased. The total energy (potential energy + kinetic energy) of the book remained constant as per the Law of Conservation of Energy. Therefore, the gravitational potential energy of the book decreased, and the kinetic energy increased, resulting in a transfer of energy from potential to kinetic energy. Therefore, the gravitational energy decreased.

The equation of the tangent plane to the surface at the point [tex]{eq}(2, 3, 9){/eq} is {eq}x + 4y + 12z = 142{/eq}.[/tex]

When writing the equation of the tangent plane to the surface at the given point, you must provide the values of two derivatives.

The full statement of the question is:

Consider[tex]{eq}S: \vec{r}(u,v) = (u, u^2 + v, u^3 + v^2) {/eq}[/tex] as a parametrized surface in the natural way.

Write the equation of the tangent plane to the surface at the point given that[tex]{eq}u=2 {/eq} and {eq}v=1 {/eq}.[/tex]

The equation of the tangent plane to the surface at the point [tex]{eq}(2, 3, 9){/eq}[/tex]is given by:

[tex]{eq}\vec{r_u}(u,v) \cdot (x-2) + \vec{r_v}(u,v) \cdot (y-3) + \vec{r}(u,v) \cdot (z-9) = 0 {/eq}[/tex]

where[tex]{eq}\vec{r_u}{/eq} and {eq}\vec{r_v}{/eq}[/tex]are the derivatives of the parametric equation with respect to [tex]{eq}u{/eq} and {eq}v{/eq},[/tex] respectively.

These are given by:

[tex]{eq}\vec{r_u}(u,v) = (1, 2u, 3u^2) {/eq}{eq}\vec{r_v}(u,v) = (0, 1, 2v) {/eq}[/tex]

To evaluate these at the point [tex]{eq}(2, 1){/eq},[/tex]

substitute these values into the expressions above:

[tex]{eq}\vec{r_u}(2,1) = (1, 4, 12) {/eq}{eq}\vec{r_v}(2,1) = (0, 1, 2) {/eq}[/tex]

Then, substitute these and the point into the equation of the plane:

[tex]{eq}\vec{r_u}(2,1) \cdot (x-2) + \vec{r_v}(2,1) \cdot (y-3) + \vec{r}(2,1) \cdot (z-9) = 0 {/eq}[/tex]

Simplifying, we obtain:

[tex]{eq}(x-2) + 4(y-3) + 12(z-9) = 0 {/eq}[/tex]

for such more question on tangent plane

https://brainly.com/question/30884029

#SPJ11

Explanation:

Ff = mg ( .25)

KE = 1/2 m (2.5)^2

Work of friction    mg (.25) X (d)      must equal the KE for the disc to stop

  mg(.25)(d) = 1/2 m ( 2.5)^2   <=== Divide both sides by 'm'

    g (.25)(d) = 1/2 ( 2.5)^2

    9.81 (.25) d = 1/2 ( 2.5)^2

      d = 1.27 m

Entropy is a measure of disorder in a system and is generated by a variety of sources in Engineering Thermodynamics. The item that is NOT regarded as a source of entropy generation is heat capacity (C). Entropy is instead generated by heat transfer (Q), changes in pressure (P), and changes in temperature (T).

The correct option is (d) periodic maintenance of machines.Entropy is a measure of disorder in a system that is used in thermodynamics. It is related to the amount of energy that is unavailable to do work. The increase in entropy is a natural consequence of energy transformations that occur in all real processes.

The second law of thermodynamics is the basis of the concept of entropy, which states that the total entropy of a closed system always increases over time, and it never decreases. Therefore, all real processes tend towards equilibrium, which is characterized by maximum entropy.Answer:(d) periodic maintenance of machines.

For more such questions on Entropy

https://brainly.com/question/11640206

#SPJ11

Systematic error is a type of measurement error that results in systematically over- or under-measuring the value of a concept.

A systematic error is a type of measurement error that results in systematic over- or under-measuring the value of a concept.

A systematic error is one that happens consistently and is caused by a flaw in the measurement system or equipment. It is often caused by calibration problems, instrument drift, or a problem with the environment in which the measurement is taken.

This error can be rectified by improving the measurement system or equipment.Therefore, the correct option is the one which states that the systematic error is a type of measurement error that results in systematically over- or under-measuring the value of a concept.

for such more question on systematic error

https://brainly.com/question/14639975

#SPJ11