The water flow takes 1.06 s to reach the house.
Water strikes 0.87 m above the window when the firefighter holds the hose at a [tex]53^o[/tex] angle from horizontal.
The magnitude of velocity when water hits the house is 7.52 m/s.
The minimum speed for water to enter into the window is[tex]v_0 = d / (v_0cos(\theta)) \times\sqrt{(8.4-2dtan\theta)/g}[/tex].
The question can be solved by applying the concept of projectile motion. When an object is projected into the air, it follows a curved path under the influence of gravity. The path followed by a projectile is called a parabolic path.
To solve this problem, we can break it down into a few parts.
First, let's find the time it takes for the water to reach the house:
We can use the horizontal distance between the firefighter and the house, which is 8 m, and the initial horizontal velocity of the water, which can be found using the initial speed and launch angle:
[tex]v_x = v_0 cos(53^\circ)[/tex]
[tex]v_x = 12.5 \ m/s \times cos(53^\circ)[/tex]
[tex]v_x = 7.5 \ m/s[/tex]
The time it takes for the water to travel the horizontal distance of 8 m can be found using the formula:
[tex]time = distance/velocity[/tex]
[tex]time = 8 \ m / 7.5 \ m/s[/tex]
[tex]time = 1.06\ s[/tex]
So it takes 1.06 seconds for the water to reach the house.
Next, let's find the height above the window that the water reaches:
We can use the vertical distance between the firefighter and the window, which is (6 - 1.8) m, and the initial vertical velocity of the water, which can be found using the initial speed and launch angle:
[tex]v_y = v_0 sin(53^\circ)[/tex]
[tex]v_y = 12.5 \ m/s \times sin(53^\circ)[/tex]
[tex]v_y = 9.98 \ m/s[/tex]
The time it takes for the water to reach the house is 1.06 s, so we can use this time and the initial vertical velocity to find the height above the window that the water reaches:
[tex]y = v_yt - 0.5gt^2[/tex]
[tex]y = 9.98 \ m/s \times 1.06 s - 0.5 \times 9.8 \ m/s^2 \times (1.06 \ s)^2[/tex]
[tex]y = 5.07\ m[/tex]
Since the firefighter is holding the fire hose 1.8 m above the ground, the total height reached by the water is
h = 1.8 + 5.07 = 6.87 m
Height above the window = 6.87 - 6 = 0.87 m
So the water reaches a height of 0.87 m above the window.
Next, let's find the magnitude of the velocity of the water when it strikes the house:
Vertical velocity of water when it stricks the house at t = 1.06 s.
[tex]v_{y(final)} = 9.98 - 9.81\times 1.06[/tex]
[tex]v_{y(final)} = 0.588 \ m/s[/tex] (downwards)
We can use the horizontal and vertical components of the velocity to find the total velocity using the Pythagorean theorem:
[tex]v = \sqrt{vx^2 + vy^2}[/tex]
[tex]v = \sqrt{(7.5\ m/s)^2 + (0.588\ m/s)^2}[/tex]
v = 7.52 m/s
So the magnitude of the velocity of the water when it strikes the house is 7.52 m/s.
Finally, let's find the minimum angle and speed of the flow in order to get water right into the window:
For the water to reach the window, its vertical displacement must be equal to the vertical distance between the firefighter and the window, which is 4.2 m. We can use this information to find the launch angle and speed using the equations of motion:
[tex]y = v_0 sin(\theta) t - 0.5 g t^2[/tex]
[tex]4.2 m = v_0 sin(\theta) t - 0.5 g t^2[/tex] ....(1)
[tex]v_x = v_0 cos(\theta)[/tex]
[tex]t = d / v_x[/tex]
[tex]t = {d}/{v_0 cos\theta}[/tex] .....(2)
Substituting the second equation into the first equation and solving for [tex]v_0[/tex] and θ, we get:
[tex]v_0 = d / (v_0cos(\theta) t)[/tex]
[tex]4.2 m = (\frac{d}{(cos(\theta) t)}) \times sin(\theta) t - 0.5 g t^2[/tex]
Solving for t and substituting into the equation for [tex]v_0[/tex], we get:
[tex]t = \sqrt{(8.4-2dtan\theta)/g}[/tex]
[tex]v_0 = d / (v_0cos(\theta) \times\sqrt{(8.4-2dtan\theta)/g)}[/tex]
Substituting the values given in the problem (d = 8 m, [tex]g = 9.8 m/s^2[/tex]), we can solve for θ and [tex]v_0[/tex]
Learn more about projectile motion:
https://brainly.com/question/24216590
#SPJ11
A nonrelativistic electron and a nonrelativistic proton have the same de Broglie wavelength. Which of the following statements about these particles are accurate? (There may be more than one correct choice.). A) Both particles have the some speed. b) Both particles have the some kinitic energy c) the electron has more kinetic energy than the proton. d) the electron has more momentum than the proton. e) Both particles have the some momentum
For a nonrelativistic electron and a nonrelativistic proton having the same de Broglie wavelength, we can say that: both particles have the same speed and both particles have the same momentum. The correct answers are Option A and E.
The de Broglie wavelength is defined as the wavelength of a particle, which is associated with its momentum. It is given by,
λ = h / p
where λ is the de Broglie wavelength, h is the Planck's constant and p is the momentum of the particle.
Therefore, if a nonrelativistic electron and a nonrelativistic proton have the same de Broglie wavelength, they must have the same momentum. This is because the momentum of the particle is inversely proportional to its wavelength.
The formula for the kinetic energy of a particle is given by,
K.E. = p² / 2m
where K.E. is the kinetic energy of the particle, p is the momentum of the particle and m is the mass of the particle.
Since the momentum of the electron and the proton is the same, the kinetic energy of the electron and the proton will depend on their mass. Therefore, it can be concluded that the electron will have more kinetic energy than the proton because the mass of the electron is much smaller than the mass of the proton.
Learn more about De Broglie theory here: https://brainly.com/question/20372425
#SPJ11
if a basketball and a medicine ball are dropped from the same height at the same time, without air resistance, which ball would land first? explain
Without air resistance, both the basketball and the medicine ball will fall at the same rate and reach the ground at the same time. This is due to the fact that gravity affects objects the same, regardless of their mass.
Why would the basketball fall first?When a ball is dropped from a height, the only force acting upon it is gravity. Gravity pulls each ball with the same force; however, the ball with more mass will have more gravitational potential energy than the other. It means the basketball will have more potential energy to convert to kinetic energy during the fall, making it faster than the medicine ball.
Thus, in conclusion, the basketball would fall first as it is more massive than the medicine ball.
When a basketball and a medicine ball are dropped from the same height at the same time without air resistance, the basketball would land first. The explanation for this is due to the size and weight of each ball.
Basketball is heavier than the medicine ball, and both have the same height to fall. The more massive the object, the more gravitational pull it experiences, and thus, it falls faster. So, the basketball would land first if a basketball and a medicine ball are dropped from the same height at the same time without air resistance.
Read more about mass here:
https://brainly.com/question/19385703
#SPJ11
A polarized light is incident on several polarizing disks whose planes are parallel and centered on common axis. Suppose that the transmission axis of the first polarizer is rotated 19 relative to the axis of polarization of the incident îight and tat î e ư n miss on aus of each additional analyzer is rotated 19° relative to the transmission axis of the previous one. What is the minimum number of polarizer needed whole number), so the transmitted light through all polarizing sheets has an intensity that is less than 18% that striking the first polarizer?
The minimum number of polarizers required to make the transmitted light through all the polarizing sheets have an intensity that is less than 18% of that striking the first polarizer is four.
Using Malus' Law, determine the intensity of light transmitted through a polarizer that is rotated at an angle θ relative to the incident polarization of the light.
Malus' Law: I = I₀cos²θ, Where, I₀ is the initial intensity of the light and θ is the angle of rotation.
Calculate the light intensity transmitted through each polarizer.
I₀ = Intensity of polarized light incident on the first polarizer = 100% = 1
I = I₀ cos²19° = 0.818 I₀
I = I cos²19° = 0.667 I₀
I = I cos²19° = 0.544 I₀
I = I cos²19° = 0.443 I₀
I = 0.18 I₀, where I is the intensity of the transmitted light
Determine the minimum number of polarizers required.The transmitted light has an intensity of 18% of that striking the first polarizer. Since the intensity of transmitted light is reduced to 18% after the fourth polarizer, the minimum number of polarizers needed is 4.
Therefore, the minimum number of polarizers required to make the transmitted light through all the polarizing sheets have an intensity that is less than 18% of that striking the first polarizer is four.
Learn more about "polarizers" at : https://brainly.com/question/16106487
#SPJ11
what's the correct answer.
The coordinated functions of the Nervous, Endocrine, and Reproductive systems are:
D. CerebrumN. Wernicke's AreaF. Occipital LobeH. HypothalamusJ. ThalamusH. HypothalamusC. CerebellumL. Superior ColliculusA. AmygdalaM. Pineal GlandWhat are coordinated functions?Coordinated functions refer to the integration and communication between different organs, systems, and tissues in the body to achieve a common goal or purpose. In biological terms, coordinated functions often involve multiple physiological systems working together to maintain homeostasis, respond to stimuli, or carry out complex behaviors or processes.
Examples of coordinated functions include the regulation of blood glucose levels by the pancreas and liver, the coordination of movement by the nervous and musculoskeletal systems, and the release of hormones by the endocrine system to control various physiological processes.
Learn more on coordinated functions here: https://brainly.com/question/15686131
#SPJ1
The question is:
"COORDINATED FUNCTIONS OF THE NERVOUS, ENDOCRINE, AND REPRODUCTIVE SYSTEMS"
Directions: Identify the part of the brain that is involved in each situation below. Write only the letter of your answer.
A. Amygdala
B. Brocka's Area
C. Cerebellum
D. Cerebrum
E. Hippocampus
F. Occipital Lobe
G. Hippocampus
H. Hypothalamus
I. Inferior Colliculus.
J. Thalamus
K. Pons
L Superior Colliculus
M. Pineal Gland
N. Wernicke's Area
O. Pituitary Gland
1. "My heart tells me that you are the one. I love you so much!"
2. "IAOCEVOY! I don't know what that means. It's all Greek to me!"
3. "Chartreuse, Olive,Turquoise, and Mint are all shades of green."
4. "Janna always wakes up at 4 in the morning, regardless of whether she uses an alarm clock or not."
5. "I don't remember the way going to Myla's house. Can you accompany me there?"
6. Jenny's mother is about to give birth, she complains about contraction and pain usually when the baby is kicking
7. "Anthony is a very skilled dancer. He just won the school hip hop dance competition last week."
8. "As Nica was walking on the road she readily moved to the side for she heard an incoming ambulance"
9. "Elsa loves making faces whenever she talks to her friends."
10. "Ryan usually talks about how happy his high school days were to his grandchildren."
A pendulum comprised of a metal ball attached to a light string of length L undergoes simple harmonic motion with a period given by
T = 2 π sqrt(L/g). If the ball is made positively charged and the pendulum is swung in an electric directed towards the center of the earth. Which statement is true?
Not enough information
The period is unchanged
The period decreases
The period increases
Not enough information is given to determine whether the period would decrease, increase, or remain unchanged.
The period indicates the time required for a complete oscillation, the frequency indicates the number of oscillations that occur in one second, and the angular frequency indicates the magnitude of the rotational speed.
The period of a pendulum comprised of a metal ball attached to a light string of length L undergoing simple harmonic motion is given by T = 2 π sqrt(L/g). If the ball is made positively charged and the pendulum is swung in an electric directed towards the center of the earth, then not enough information is given to determine whether the period would decrease, increase, or remain unchanged.
Learn more about The period of a pendulum: brainly.com/question/11746625
#SPJ11
A curve of radius 68m is banked for a design speed of 93 km/hr.
If the coefficient of static friction is 0.35 (wet pavement), at what range of speeds can a car safely make the curve? [Hint: Consider the direction of the friction force when the car goes too slow or too fast.]
need both the max and min speeds
Ive tried yalls examples on similar problems and yet i remain off
The maximum speed of the car is 66.83 km/h and the minimum speed of the car is 30.83 km/h.
What is the range of speed of car?Centrifugal force = friction force
mv²/r = μmgcosθ
μ = 0.35, g = 9.8m/s², θ = angle of banking angle
Maximum speed when the car moves too fast, it will slide away from the road. In this case, the frictional force will act outward against the motion of the car. This force will be directed as follows:
Friction force (f) = μNsinθ
where N = mg, Friction force (f) = 0.35 × 9.8 × cos (68/68) = 3.225 N
The maximum velocity of the car, that is, the velocity at which it will slide outward and upward from the road is:
vmax = √(μgr) = √(0.35 × 9.8 × 68) = 18.563 m/s = 66.83 km/h
Therefore, the car must move at a speed of 66.83 km/h or less, or it will slide away from the road.
Minimum speed when the car moves too slowly, it will move down the slope of the curve. In this case, the frictional force will act inward towards the car's motion. This force will be directed as follows:
Friction force (f) = μNsinθ = 3.225 N
The minimum velocity of the car, that is, the velocity at which it will slide outward and downward from the road is:
vmin = √(μgr) = √(0.35 × 9.8 × 68) = 18.563 m/s = 30.83 km/h
Therefore, the car must move at a speed of 30.83 km/h or more, or it will slide away from the road.
Learn more about Centrifugal force here:
https://brainly.com/question/17167298
#SPJ11
p55. a 0.900 v potential difference is maintained across a 1.50 m length of tungsten wire that has a cross-sectional area of 0.600 mm . what is the2 current in the wire?
The current in the wire when a 0.900 V potential difference is maintained across a 1.50 m length of tungsten wire that has a cross-sectional area of 0.600 mm² can be calculated using Ohm's Law. The current through the wire is 0.643 A.
What is Ohm's Law?Ohm's law states that the current through a conductor between two points is directly proportional to the voltage across the two points. Introducing the constant of proportionality, the resistance, one arrives at the usual mathematical equation that describes this relationship:
I = V/R
where:
I is the current through the conductor in units of amperes, V is the potential difference measured across the conductor in units of volts,R is the resistance of the conductor in units of ohms.I = V/RI = (0.9 V)/(R)
The resistivity of tungsten is given by 5.6 x 10⁻⁸ Ωm.The formula for the resistance of the wire is given by
R = (ρL)/AR = [(5.6 x 10⁻⁸ Ωm) (1.5 m)]/(0.6 mm²)The resistance of the wire is 1.4 Ω.I = V/RI = (0.9 V)/(1.4 Ω)
The current through the wire is 0.643 A.
Learn more about Ohm's Law: https://brainly.com/question/14296509
#SPJ11
Before the advent of solid-state electronics, vacuum tubes were widely used in radios and other devices. A simple type of vacuum tube known as a diode consists essentially of two electrodes within a highly evacuated enclosure. One electrode, the cathode, is maintained at a high temperature and emits electrons from its surface. A potential difference of a few hundred volts is maintained between the cathode and the other electrode, known as the anode, with the anode at the higher potential.
Suppose a diode consists of a cylindrical cathode with a radius of 6.200×10−2 cm, mounted coaxially within a cylindrical anode with a radius of 0.5580 cm. The potential difference between the anode and cathode is 320 V . An electron leaves the surface of the cathode with zero initial speed (vinitial=0). Find its speed (vfinal) when it strikes the anode.
Express your answer numerically in meters per second.
The speed of the electron when it strikes the anode is vfinal = 2.6x107 m/s.
Vacuum tubes were often utilized in radios and other devices before the development of solid-state electronics. A diode is a straightforward sort of vacuum tube that simply consists of two electrodes enclosed in a highly evacuated space.
The cathode, one electrode, emits electrons from its surface while being kept at a high temperature.
The cathode and the opposite electrode, known as the anode, are kept at a potential difference of a few hundred volts, with the anode being at a greater potential.
An electron leaves the
cathode of a diode with a radius of 6.200x10⁻²cm and
an anode with a radius of 0.5580 cm, and
with a potential difference of 320 V.
The initial speed of the electron is 0 m/s.
The speed (vfinal) when it strikes the anode can be calculated using the equation vfinal = (2 × e × V)1/2,
where e is the electron charge (1.6x10⁻¹⁹C).
Therefore, the speed of the electron when it strikes the anode is
vfinal = (2 × 1.6x10⁻¹⁹ × 320)1/2 = 2.6x107 m/s.
To know more about Speed: https://brainly.com/question/13943409
#SPJ11
in comparison to radio waves in vacuum, visible light in vacuum has wavelengths that are equal. wavelengths that are longer. frequencies that are equal. a speed that is faster. wavelengths that are shorter.
In comparison to radio waves in a vacuum, visible light in a vacuum has wavelengths that are shorter.
It is because the wavelength of visible light ranges from about 400 to 700 nanometers (nm), while radio waves can have wavelengths of up to kilometers.
When any wave travels through a vacuum, it maintains a constant speed of 299,792,458 meters per second (m/s). But the wavelength and frequency are inversely proportional to each other, so as the frequency of the wave increases, its wavelength decreases, and vice versa.
Hence, visible light with a higher frequency has a shorter wavelength than radio waves, which have a much lower frequency. Thus, the wavelengths of visible light in a vacuum are shorter as compared to radio waves in a vacuum.
To know more about wavelengths, refer here:
https://brainly.com/question/13533093#
SPJ11#
suppose the car, traveling at 25 m/s is rounding this flat curve with highest possible speed for the conditions of the road, to stay on the circle without sliding out to a greater radius. what is the coefficient of static friction between its tires and the ground?
The coefficient of static friction between its tires and the ground is 0.80.
To determine the coefficient of static friction between its tires and the ground, we can use the expression for the coefficient of static friction given by;
μ_s = (g * tanθ) / (1 - (v²/r²))
Where;
μ_s = Coefficient of static friction
g = Acceleration due to gravity
θ = Angle of banking
r = Radius of the curve
v = Velocity of the vehicle
Substitute g = 9.8 m/s², θ = 0°, r = 100 m, and v = 25 m/s in the above expression.
μ_s = (9.8 * tan0) / (1 - (25²/100²))
μ_s = 0.80
Hence, the coefficient of static friction is 0.80.
Learn more about coefficient of static friction here: https://brainly.com/question/25050131.
#SPJ11
In order to join more than two datasets with only visual recipes, which of the following solutions is correct and why? It is not possible to join more than two datasets at a time with the Join recipe. Perform multiple Join recipes instead. Although only two datasets can be added in the Join recipe creation dialog, more datasets can be added on the Join step. Provided it is a left join, a single Join processor of the Prepare recipe is capable of joining more than two datasets at a time. None of these.
The correct solution is "Perform multiple Join recipes instead." It is not possible to join more than two datasets at a time with the Join recipe. Each Join recipe can only join two datasets at a time. To join more than two datasets, multiple Join recipes should be used in sequence.
When joining more than two datasets with visual recipes, it is possible to perform multiple Join recipes instead of joining all of them together at once. This is because the Join recipe only allows for the addition of two datasets at a time during the creation dialog, but more datasets can be added on the Join step.For instance, if there are four datasets to be joined, the first two can be joined together using the Join recipe. Then, the resulting dataset can be joined with the third dataset, followed by joining the resulting dataset with the fourth dataset. This way, all four datasets can be joined together.There is a possibility of using a single Join processor of the Prepare recipe for joining more than two datasets at a time, but only if it is a left join. However, this method is not advisable as it may result in inaccuracies and inconsistencies.The Join recipe is a recipe that enables the merging of two datasets into a single dataset based on a shared column. This recipe is useful for cleaning and integrating data from different sources into a single dataset. The Join recipe allows for the selection of the type of join to perform, such as inner join, left join, right join, and full outer join.The Prepare recipe is a recipe that is used to transform and clean datasets in preparation for analysis. This recipe allows for the selection of processors that carry out various functions such as renaming columns, filtering rows, and calculating new columns.
For mroe such questions on Datasets
https://brainly.com/question/4219149
#SPJ11
A straight 2.80 m wire carries a typical household current of 1.50 A (in one direction) at a location where the earth's magnetic field is 0.550 gauss from south to north.
*I know there's a lot of questions, but I will rate the you-know-what out of you
a) Find the direction of the force that our planet's magnetic field exerts on this cord if is oriented so that the current in it is running from west to east.
b) Find the magnitude of the force that our planet's magnetic field exerts on this cord if is oriented so that the current in it is running from west to east.
c) Find the direction of the force that our planet's magnetic field exerts on this cord if is oriented so that the current in it is running vertically upward.
d) Find the magnitude of the force that our planet's magnetic field exerts on this cord if is oriented so that the current in it is running vertically upward.
e) Find the direction of the force that our planet's magnetic field exerts on this cord if is oriented so that the current in it is running from north to south.
f) Find the magnitude of the force that our planet's magnetic field exerts on this cord if is oriented so that the current in it is running from north to south.
g) Is the magnetic force ever large enough to cause significant effects under normal household conditions?
If the current is running from west to east, then the direction of the force that our planet's magnetic field exerts on the cord is from south to north directions and The magnitude of the magnetic force is about 0.825 Newtons.
What are the magnetic force?If the current is running from west to east, then the direction of the force that our planet's magnetic field exerts on the cord is from south to north. The magnitude of the force is given by the equation F = B × I × L, where B is the magnetic field strength, I is the current, and L is the length of the wire. In this case, the magnitude of the force is 0.825 N.
If the current is running vertically upward, then the direction of the force that our planet's magnetic field exerts on the cord is from east to west.
The magnitude of the force is again given by the equation F = B × I × L, so the magnitude of the force is 0.825 N.
If the current is running from north to south, then the direction of the force that our planet's magnetic field exerts on the cord is from west to east.
The magnitude of the force is again 0.825 N. The magnetic force is not large enough to cause significant effects under normal household conditions.
Learn more about Magnetic force here:
https://brainly.com/question/3160109
#SPJ11
A 29-g rifle bullet traveling 210 m/s embeds itself in a 3.2-kg pendulum hanging on a 2.9-m-long string, which makes the pendulum swing upward in an arc
Part A
Determine the vertical component of the pendulum's maximum displacement
Part B
Determine the horizontal component of the pendulum's maximum displacement.
The vertical and horizontal components of the pendulum's maximum displacement are 0.82 m and zero, respectively. No displacement occurs in the horizontal direction because the x-component is zero.
Mass of bullet, m = 29 g = 0.029 kg
Velocity of bullet, v = 210 m/s
Mass of pendulum, M = 3.2 kg
Length of pendulum, l = 2.9 m
Initial velocity of the bullet before colliding with the pendulum can be calculated as v = u + at ⇒ a = (v-u) / t
Here, u = 0 (initial velocity is zero)
t = time of flight of the bullet = 2.9 / (9.81) = 0.295 s
Hence, a = v / t = 210 / 0.295 = 712.71 m/[tex]s^2[/tex]
The momentum of the bullet just before hitting the pendulum can be given as:
p = m * v = 0.029 * 210 = 6.09 N s
Let us assume that after hitting the pendulum, the bullet and the pendulum stick together and move with a velocity 'V' (as shown in the figure).
Bullet and Pendulum moving together
According to the principle of conservation of momentum, the total momentum before the collision is equal to the total momentum after the collision:
(m * v) = (M + m) * V
⇒ V = m * v / (M + m)
⇒ V = 0.029 * 210 / (3.2 + 0.029)
⇒ V = 4.03 m/s
Now, the pendulum moves to a maximum height which can be calculated using the principle of conservation of energy:
Initial KE + Initial PE = Final KE + Final PE
1/2 * (M + m) * [tex]V^2[/tex] + 0 = (M + m) * g * h
⇒ h = [tex]V^2[/tex] / (2*g)
⇒ h = [tex]4.03^2[/tex] / (2*9.81)
⇒ h = 0.82 m
Part A: The vertical component of the pendulum's maximum displacement is 0.82 m.
Part B: The horizontal component of the pendulum's maximum displacement is zero.
The bullet hits the pendulum and gets embedded into it. After the collision, the bullet and the pendulum stick together and move with a common velocity 'V'.The pendulum moves to a maximum height of 0.82 m (which is the maximum displacement in the vertical direction). However, there is no displacement in the horizontal direction (i.e., the x-component of displacement is zero).
Learn more about displacement: https://brainly.com/question/248054
#SPJ11
We always see the same side of the Moon because a. the Moon does not rotate on its axis. b. the Moon rotates on its axis once for each revolution around Earth. c. when t…
We always see the same side of the Moon because
a. the Moon does not rotate on its axis.
b. the Moon rotates on its axis once for each revolution around Earth.
c. when the other side of the Moon is facing Earth, it is unlit.
d. when the other side of the Moon is facing Earth, it is on the opposite side of Earth.
e. none of the above
We always see the same side of the Moon because the "Moon rotates on its axis once for each revolution around Earth." Thus, the correct option will be B.
How does the Moon rotates?When the Moon rotates on its axis once for each revolution around Earth, then we always see the same side of the Moon. The reason behind this is that the moon's rotation takes almost the same time as it takes to orbit the Earth.
When the same side of the moon is facing the Earth, it appears to be unchanging. That is why we always see the same side of the moon from Earth. The other side of the Moon is known as the far side, which was first observed by the Soviet spacecraft Luna 3 in 1959.
Therefore, the correct option will be B.
Learn more about Moon here:
https://brainly.com/question/13538936
#SPJ11
Which of the following statements is true about the relationship between the two forms of Newton's second law (Fnet = dp/dt and Fnet = m.a) Select the correct answer
a. Fnet = dp/dt reduces to Fnet = m.a if the O acceleration of the object does not change with time. b. Fnet = m.a reduces to Fnet = dp/dt if the acceleration of the object does not change with time. c. Fnet = m.a reduces to Fnet = dp/dt if the mass of the object Answer dt does not change with time. d. Fnet = m.a reduces to Fnet = m.a if the dt momentum of the object does not change with time. e. Fnet = dp/dt reduces to Fnet = m.a if the mass of the object does not change with time. f. Fnet = m.a reduces to Fnet = dp/dt if the momentum of the object does not change with time.
The correct statement about the relationship between the two forms of Newton's second law (Fnet = dp/dt and Fnet = m.a) is option D "Fnet = m.a reduces to Fnet = dp/dt if the momentum of the object does not change with time.
What is Newton's second law?Newton's second law of motion states that the acceleration of an object is directly proportional to the force applied to it and inversely proportional to its mass. In other words, Fnet = m.a, where Fnet is the net force acting on an object, m is its mass, and a is its acceleration. This law can also be written as Fnet = dp/dt, where dp/dt is the rate of change of momentum with time.
Since momentum is the product of mass and velocity, it can be rewritten as dp/dt = m.dv/dt + v.dm/dt, where v is the velocity of the object. If the mass of the object remains constant over time, then v.dm/dt is zero and dp/dt reduces to m.dv/dt, which is equal to Fnet.
Therefore, Fnet = dp/dt reduces to Fnet = m.a if the object's acceleration does not change with time. If the momentum of the object does not change with time, then dp/dt is zero, and Fnet = dp/dt reduces to zero, which means that Fnet = m.a is also zero. Therefore, Fnet = m.a reduces to Fnet = dp/dt if the momentum of the object does not change with time.
To know more about Newton's second law:
https://brainly.com/question/13447525
#SPJ11
if thee electron at the surface of the negative plate were released from rest, what would be its velocity
If an electron at the surface of the negative plate were released from rest, its velocity would depend on the potential difference between the plates.
Potential difference (V) is the work done per unit charge. Its unit is volts (V). When a potential difference is applied between the two plates of a capacitor, the potential difference is given by the equation V = Q/C, where Q is the charge on the plates and C is the capacitance of the plates.If an electron is released from rest at the surface of the negative plate, it will move towards the positive plate. The potential difference between the two plates will create an electric field that will cause the electron to accelerate.
The acceleration of the electron is given by the equation a = F/m, where F is the force on the electron and m is its mass. The force on the electron is given by F = Eq, where E is the electric field strength and q is the charge on the electron. Therefore, the acceleration of the electron is given by a = Eq/m.After a time t, the velocity of the electron is given by v = at. Therefore, the velocity of the electron at any time t is given byv = (Eq/m)t.Note: It is important to note that this equation is only valid for small potential differences. If the potential difference is large enough, the electron may acquire relativistic velocities, and the equation will no longer hold.
Learn more about potential difference at:
https://brainly.com/question/16541033
#SPJ11
An 8 kg ball travelling at 4 m/s collides head on with a 3 kg ball travelling at 14 m/s. The balls bounce off each other and travel back the way they came. The 8 kg ball travels away at 2 m/s. calcukate: the velocity of the 3 kg ball after the collision.
The velocity of the 3 kg ball after collision with the 8 kg ball is 2 m/s.
What is velocity?Velocity is the rate of change of displacement.
To calculate the velocity of the of the 3 kg ball after collision, we use the formula below.
Formula:
MU+mu = MV+mv................... Equation 1Where:
M = Mass of the bigger ballm = Mass of the smaller ballU = Initial velocity of the bigger ballu = Initial velocity of the smaller ballV = Final velocity of the bigger ballv = Final velocity of the smaller ballFrom the question,
Assuming: The bigger ball is initial traveling to the right and lets take right to be positive.
Given:
M = 8 kgm = 3 kgU = 4 m/su = -14 m/sV = - 3 m/sSubstitute these values into equation 1 and solve for v
(8×4)+(-14×3) = (-2×8)+(3×v)32-42 = -16+3v3v = -10+163v = 6v = 6/3v = 2 m/sHence, the velocity of the 3 kg ball is 2 m/s.
Learn more about velocity here: https://brainly.com/question/24445340
#SPJ1
2.1 What is meant by triboelectric charging?
Answer:
Explanation:
The triboelectric effect (also known as triboelectric charging) is a type of contact electrification on which certain materials become electrically charged after they are separated from a different material with which they were in contact.
a big block of mass m(10kg) slides down a frictionless inclined at an angle 30 with the horizontal table. initially the block is at the top of the incline at rest. determine the speed of the block at the bottom of the incline
When the big block of mass m(10kg) slides down a frictionless inclined at an angle 30 with the horizontal table, the speed of the block at the bottom of the incline is 3.14 m/s.
Given that
Mass of the block, m = 10 kg.
Angle of inclination, θ = 30°
Initial velocity, u = 0.
Frictional force, f = 0.
Using the formula for gravitational force, F = mg
where, g = 9.8 m/s² (acceleration due to gravity)
F = mg= 10 kg × 9.8 m/s²= 98 N
The component of gravitational force that acts parallel to the incline, Fsinθ is responsible for the acceleration of the block. Fsinθ = ma; Where a is the acceleration of the block.
a= (98 N)sin 30° / 10 kg= 4.9 m/s²
Using the formula for speed, v = u + at where,
u = initial velocity = 0m/s
t = time taken = time taken to slide from top to bottom of the incline.= √(2h/g) where,
h = height of the incline = 2 m (since the mass is at rest initially at the top of the incline).
Therefore, t = √(2 × 2 m / 9.8 m/s²)= 0.64 s
Substituting the values in the above formula, v = u + at= 0 + (4.9 m/s² × 0.64 s)= 3.14 m/s.
To know more about speed, refer here:
https://brainly.com/question/29309579#
SPJ11#
5
Read the following sentences:
In those early games, balls and bats were often homemade. Anyone who
used a glove or mask was called a sissy. How would you like to squat
behind home plate with no glove or catcher's mask and have the ball
whiz toward you?
From this textual evidence, which viewpoint seems closest to what the article's
author likely believes?
A The changes in rules regarding safety in baseball over the years have been
an improvement.
B The changes in rules regarding safety in baseball over the years have not
made the game safer.
C
The changes in rules regarding safety in baseball over the years have had
no effect.
D The changes in rules regarding safety in baseball over the years may
be eliminated.
Three engines operate between reservoirs separated in temperature by 300 K. The reservoir temperatures are as follows:Engine A: Th = 1000 K, Tc = 700 K;Engine B: Th = 800 K, Tc = 500 K;Engine C: Th = 600 K, Tc = 300 K.Rank the engines in order of theoretically possible efficiency, from highest to lowest.
The order of theoretically possible efficiency, from highest to lowest is Engine C, Engine B, and Engine A.
The theoretical efficiency of a Carnot engine is given by the formula:
Efficiency = 1 - T_{c} / Th
where Th and T_{c} are the temperatures of the hot and cold reservoirs, respectively.
Using this formula, we can calculate the efficiency of each engine.
For engine A, we have:
Efficiency = 1 - T_{c} / Th = 1 - 700 K / 1000 K = 0.3 or 30%
For engine B, we have:
Efficiency = 1 - T_{c} / Th = 1 - 500 K / 800 K = 0.375 or 37.5%
For engine C, we have:
Efficiency = 1 - T_{c} / Th = 1 - 300 K / 600 K = 0.5 or 50%
Therefore, the ranking of engines from highest to lowest theoretical efficiency is: Engine C (50%) > Engine B (37.5%) > Engine A (30%)
To practice more questions about theoretical efficiency:
https://brainly.com/question/29339898
#SPJ11
5. (10 pts) The shedding frequency based on the analysis of Question 3 is to be determined through the use of a small-scale model to be tested in a water tunnel. For the specific bridge structure of interestD=20 cmandH=300 cm, and the wind speedVis25 m/s. Assume the air is at MSL ISA conditions. For the model, assume that D m=2 cm. (a) Determine the length of the model Hm needed for geometric scaling. (b) Determine the flow velocity Vm needed for Reynolds number scaling. (c) If the shedding frequency for the model is found to be 27 Hz, what is the corresponding frequency for the full-scale structural component of the bridge? Notes: Refer to the eBook for the properties of air. Assume the density of water rho H2O= 1000 kg/m3 and the dynamic viscosity of water μ H2O=1×10^−3 kg/m/s.
Length of the model Hm = 12 cm. The flow velocity Vm = 5 m/s. Frekuensi yang sesuai untuk skala penuh komponen struktural jembatan adalah 2,7 Hz.
To determine the length of the model, Hm, for geometric scaling, you must use the relationship Hm/H = Dm/D, where Dm is the model's diameter, D is the full scale structure's diameter, and Hm and H are the model and full-scale heights, respectively. Substituting in the given values, we have Hm/300 cm = 2 cm/20 cm, which can be solved for Hm to find that Hm = 12 cm.
To determine the flow velocity Vm for Reynolds number scaling, you must use the relationship Vm/V = sqrt(rhoH2O/rho)*(D/Dm), where rho is the air density and rhoH2O is the water density. Substituting in the given values, we have Vm/25 m/s = sqrt(1000 kg/m3/1.225 kg/m3)*(20 cm/2 cm). Solving for Vm, we find that Vm = 5 m/s.
To determine the shedding frequency for the full-scale structure of the bridge, we must use the relationship f/fmodel = (Vmodel/V)*(Dmodel/D). Substituting in the given values, we have f/27 Hz = (5 m/s/25 m/s)*(2 cm/20 cm). Solving for f, we find that the corresponding frequency for the full-scale structural component of the bridge is 2.7 Hz.
Learn more about the flow velocity: brainly.com/question/28595543
#SPJ11
a rectangular field is twice as long as it is wide. the perimeter of the field is 450 yards. find the dimensions of the field. you must find an equation to represent the situation and solve.
The dimensions of the field can be found to be 75 yards in width and 150 yards in length.
Given:
Let the width of the rectangular field be x
Length of the rectangular field = 2x
Perimeter of the rectangular field = 450 yards
Formula Used:
Perimeter of a rectangle = 2 (l + w)
Where l and w are the length and width of the rectangle respectively.
Solution:
As per the question,
Perimeter of the rectangular field = 450 yards
Therefore, 2(Length + Width) = 450
2(x + 2x) = 450
2(3x) = 450
6x = 450
x = 75
Therefore, the width of the rectangular field is 75 yards
Length of the rectangular field = 2x = 2 × 75 = 150 yards
Hence, the dimensions of the field are 75 yards by 150 yards.
To know more perimeter, refer here:
https://brainly.com/question/30252651#
#SPJ11
The warming of a car in the sun is an excellent analogy for the greenhouse effect of our atmosphere. Complete the analogy with the words and phrases then place the sentences in order. Drag the text blocks below into their correct order. visible light с The car windows allow and infrared radiation to pass into the car. Similarly, our atmosphere allows infrared radiation and to pass through. none polar ice caps The car's interior, like the Earth's absorbs and infrared radiation then emits infrared radiation back out.
The car's interior, like the Earth's, absorbs visible light and infrared radiation, then emits infrared radiation back out.
c. Visible light and infrared rays can enter the car through the windows. Similar to how visible light and infrared radiation can pass through our atmosphere. a. Similar to how a car's exterior reflects some incoming radiation, the polar ice caps do the same. b. Just like the Earth, the interior of the car collects visible light and infrared radiation before reemitting it. d. The automobile gets hotter since none of the radiation can get through the windows. Similar to how part of the radiation that the Earth emits is trapped in the atmosphere, global warming results.
Order correctly: Visible light and infrared radiation can enter the car through the windows.
Learn more about car here:
https://brainly.com/question/11733094
#SPJ4
When only one lightbulb blows out, an entire string of decorative lights goes out. The lights in this string must be connected in
a. parallel with one current pathway
b. parallel with multiple current pathways
c. series with one current pathway
d. series with multiple current pathways
When only one lightbulb blows out, an entire string of decorative lights goes out, which means that the lights in this string must be connected in series with one current pathway.
In a series circuit, the components are connected end to end in a single path, so the current flows through each component in turn. If one component, such as a lightbulb, fails, the circuit becomes incomplete, and the current cannot flow through any of the components downstream of the failed component. This results in all the lights in the series circuit going out when one lightbulb blows out.
In contrast, in a parallel circuit, the components are connected across multiple current pathways, so if one component fails, the current can still flow through the other components, and they will continue to function normally. Therefore, if one lightbulb blows out in a parallel circuit, the other lights will continue to work.
Learn more about the series circuit:
https://brainly.com/question/19865219
#SPJ11
What is the flux through any closed surface surrounding a cylinder with surface charge densityσ = k sin φ , where k is a constant. Its height is H , and its radius is R.
The flux through any closed surface surrounding a cylinder with height H and radius R having surface charge density σ = k sin φ, where k is a constant, is φ₀=2πRLk sin φ/ε₀.
Since the cylinder's surface charge density is given by σ = k sin φ
Therefore, the total charge on the cylinder's curved surface
Q = σ(2πRL)
Where L is the height of the cylinder, Q = 2πRLk sin φ .
From Gauss's Law, the total flux through a closed surface surrounding a cylinder with height H and radius R is given by φ₀=Qε₀ .Here, ε₀ represents the vacuum permittivity. Now, substituting the value of Q, we get
φ₀ = (2πRLk sin φ)/ε₀
Therefore, the flux through any closed surface surrounding a cylinder with height H and radius R having surface charge density σ = k sin φ, where k is a constant, is φ₀=2πRLk sin φ/ε₀.
Learn more about flux and surface charge density at: https://brainly.com/question/29665619
#SPJ11
A gas is compressed at a constant pressure from a volume of 10 m3 to a volume of 4 m3 , then work done on the system is:
a) nRT ln 1/6
b) nRT In2/5
c) nRT In 5/2
d) nRT In 6
None of the answer options provided are correct as they all involve calculations that assume certain values for the pressure, volume, and temperature of the gas.
What is Constant Pressure?
Constant pressure is a thermodynamic process in which the pressure of a system remains constant during the process. This means that any change in volume or temperature of the system must be accompanied by a corresponding change in some other property, such as the amount of heat added or removed from the system.
Since the gas is compressed at a constant pressure, the work done on the system can be calculated as:
W = -PΔV
In this case, P is constant, so we have:
W = -P(V2 - V1)
W = -P(4 m^3 - 10 m^3)
W = -P(-6 m^3)
W = 6P m^3
Since we are not given any information about the type of gas or its properties, we cannot use the ideal gas law to calculate the pressure P. Therefore, we cannot determine the exact value of the work done on the system.
Learn more about Constant Pressure from given link
https://brainly.com/question/2139620
#SPJ1
suppose that one particle of the flow approaches a plate of a capacitor. explain what happens to the other plate of the capacitor?
The other plate of the capacitor is induced with an opposite charge through electrostatic induction as the particle of the flow approaches one plate.
As the particle of the flow approaches one plate of the capacitor, it induces an opposite charge on the other plate of the capacitor through the process of electrostatic induction. The electric field produced by the charge on the approaching plate pushes the electrons on the other plate away from the approaching plate, resulting in an accumulation of charge of the opposite sign on the other plate.
This process continues until the potential difference between the plates becomes large enough to produce a discharge, after which the process of electrostatic induction ceases. The discharge may occur in the form of a spark or a breakdown of the dielectric material separating the plates, depending on the strength of the electric field and the dielectric strength of the material.
Overall, the other plate of the capacitor experiences a temporary polarization and a buildup of charge of the opposite sign due to the approaching particle.
To know more about capacitor, refer here:
https://brainly.com/question/30889004#
#SPJ11
what is the main factor to consider when planning your vessel’s approach to a dock where you intend to tie up?
Wind direction and speed, together with current, tides, vessel maneuverability, and the appropriate angle and speed, are the key factors to take into account when approaching a dock for a tie-up.
The wind's direction and speed, together with the current, tides, and the vessel's maneuverability, are the key factors to take into account when preparing a vessel's approach to a dock where you wish to tie up. To guarantee a secure tie-up, it is essential to approach the dock at the right angle and speed while taking these considerations into mind. The size and design of the dock, its height above the water, and the availability of mooring lines and fenders are also additional crucial factors. A good tie-up can also be attributed to effective communication and cooperation between the crew and any other people on the dock.
learn more about vessel maneuverability here:
https://brainly.com/question/4197253
#SPJ4
calculate the corresponding electric force on an electron near the surface of the earth and compare it to the gravitational force from the earth. d) how can you shield the electron from this force even if it fluctuates in time and space?
The corresponding electric force on an electron near the surface of the earth is approximately 1.76 x 10^−19 N, while the gravitational force from the earth on the same electron is approximately 9.08 x 10^-30 N. This shows that the gravitational force is much weaker than the electric force.
To shield the electron from this force, one can use a Faraday cage, which is an enclosure made of conductive materials that can block external electric fields.
The cage works by redistributing the charges so that they cancel out the external electric field. In the case of a fluctuating electric field, the cage will continue to protect the electron as long as the field changes are not too rapid. For stronger or rapidly changing fields, other types of shielding may be necessary.
For more similar questions on gravitational force:
brainly.com/question/2598080
#SPJ11