A free electron is suspended in an electric field near the surface of the Earth.a. Give an expression for the magnitude of this electric field assuming the electron is stationary, in terms of the mass me� and charge e of the electron, and the gravitational acceleration g.b. What is the magnitude of this electric field, in N/C, assuming the electron is stationary?c. What does the small value for this field imply regarding the relative strength of the gravitational and electrostatic interaction?

The activation energy of this reaction is approximately 94.6 kJ/mol.

To determine the activation energy of a reaction, we can use the Arrhenius equation:

[tex]k = A * e^(-Ea/RT)[/tex]

where k is the rate constant of the reaction, A is the pre-exponential factor, Ea is the activation energy, R is the gas constant, T is the temperature in Kelvin.

Let's assume that the pre-exponential factor A is constant, and the temperature is increased from T1 = 92.2°C to T2 = 105°C, such that the rate constant doubles (i.e., k2 = 2 * k1). We can use these two sets of data to find the activation energy Ea:

[tex]k2/k1 = e^(-Ea/R * (1/T2 - 1/T1))[/tex]

[tex]2 = e^(-Ea/R * (1/(105+273.15) - 1/(92.2+273.15)))2 = e^(-Ea/8.3145 * (-0.0039))ln(2) = -Ea/8.3145 * (-0.0039)Ea = -ln(2) * 8.3145 / (-0.0039) = 94.6 kJ/mol[/tex]

Learn more about activation energy here:

https://brainly.com/question/28384644

#SPJ4

The variables in the kinematic equations for motion in one dimension with constant acceleration are time, initial position, initial velocity, initial acceleration, velocity, and position.

The following are accurate definitions for the variables in the kinematic equations for motion in one dimension with constant acceleration:

A. x(t) represents the particle's position at time t as determined by its initial position x. (0).

B. v(t) represents the particle's speed at time t as determined by its initial speed v. (0).

C. The particle's starting position, or the position at time t=0, is represented by the number x(0).

D. The initial velocity of the particle, or its speed at time t=0, is known as v(0).

E. an is the particle's constant acceleration.

It's vital to remember that the x and v subscripts denote the time at which the location or velocity is being measured. As an illustration, x(0) is the particle's position at time.

Learn more about acceleration here:

https://brainly.com/question/2303856

#SPJ4

E: "Removing charge from the rod" will increase the electric field strength at the position of the dot.

The electric field strength at the position of the dot depends on the charge and the distance from the charge. Therefore, any change that affects the charge or the distance will also affect the electric field strength.

You can learn more about electric field strength at

https://brainly.com/question/1216683

#SPJ4

The statement Ex = 0 at points A and B, and Ey = 0 at points A and C

is true for the coordinate system.

A mathematical tool called a coordinate system is used to find and quantify points in space. It offers a means of expressing how objects or points are situated and facing in either two- or three-dimensional space. Each point in a coordinate system is designated by its position in relation to a set of axes. The coordinate axes, often known as the axes, are typically depicted by two or three lines that intersect at the origin. These axes are used to measure coordinates, which pinpoint a point's exact location. The two most used coordinate systems are the polar coordinate system and the cartesian coordinate system, which both use two or three perpendicular axes to indicate a point's location.

To know more about the coordinate system, check out:

https://brainly.com/question/28445325

#SPJ4

The bowling ball has a rotating kinetic energy of 8.573 J and a total velocity of 134.573 J.

A particle or an item that is in motion has a sort of energy called kinetic energy. An item accumulates kinetic energy when work, which involves the energy transfer, is done on it by exerting a net force. The word "kinetic" derives from the Greek "kinesis," which means motion. Any direction can be used to move it. As can be seen, kinetic energy rises with increasing mass and/or speed, and it stays unchanged if an object slows down or accelerates up.

To calculate rotational kinetic energy:

Rotational kinetic energy = (1/2) * I * ω^2

where I is the intertia of solid

I = (2/5) * m * r^2, m is the mass and r is radius

Substituting the given values, we get:

I = (2/5) * 7 kg * (0.109 m)^2

I = 0.00265 kg * m^2

The angular velocity of the ball ω = v / r

let v is the linear velocity of the ball.

Substituting the given values, we get:

ω = 6 m/s / 0.109 m

ω = 55.046 rad/s

by substituting this values into formulae we get

Rotational KE= (1/2) * 0.00265 kg * m^2 * (55.046 rad/s)^2

Rotational KE = 8.573 J

Therefore, the rotational kinetic energy of the bowling ball is 8.573 J.

The translational kinetic energy can be calculated as:

Translational kinetic energy = (1/2) * m * v^2

Substituting the given values, we get:

Translational KE= (1/2) * 7 kg * (6 m/s)^2

Translational KE = 126 J

Therefore, the total KE of the ball is:

Total kinetic energy = Rotational kinetic energy + Translational kinetic energy

Total KE = 8.573 J + 126 J

Total kinetic energy = 134.573 J

Therefore, the total kinetic energy of the ball is 134.57

To know more about motion visits:

https://brainly.com/question/29255792

#SPJ1

Static friction is a force which keeps an object at rest. Static friction can be harmful as it releases energy in the form of heat due to rubbing of two bodies.

Static friction is a force which keeps an object at the state of rest. Static friction can be defined as the friction which is experienced when the individuals try to move a stationary object on a smooth surface, without actually triggering any relative motion between the two objects or body and the surface on which it is moving.

In static friction, the frictional force resists the force which is applied to an object in motion, and the object which remains at the state of rest until the force of static friction is overcome. In the kinetic friction, the frictional force resists the motion of an object. This produces heat energy.

Learn more about Static friction here:

https://brainly.com/question/13000653

#SPJ9

All three statements are correct based on the given information provided in the question.

All three statements are correct based on the given information. The first two statements relate to the amount of potential energy and kinetic energy the ball possesses, respectively, before impact with the board, which determines whether the board will break or not. The third statement relates to the conservation of energy, which dictates that the total energy of the system (the ball and the board) must remain constant, and some of the kinetic energy of the ball is transferred to the board as potential energy before the board breaks.

Learn more about potential energy here brainly.com/question/24284560

#SPJ4

The integral that can be used to find the value of k when the tank becomes empty is  [tex]\int\limits^k_{18}[/tex] R(t)dt = 1310

The differential solution is a function that satisfies the intended differential. In this case, it is intended to find the value of R(t).

The solution to the differential equation can be an analytical solution, where the answer to the differential equation can be expressed in terms of basic functions such as eⁿ, sin t, cost t, etc.

Not all differential equations can be solved analytically. Differential payment solutions can also be searched using numerical methods that produce solutions with approximate values.

So, the uniqueness involving the integral expression on the water pumped into the tank is [tex]\int\limits^k_{18}[/tex] R(t)dt = 1310

Your question is incomplete but most probably your full question was:

For t > 18 no water is pumped into the tank, but water continues to be removed at the rate R(t) until the tank becomes empty. Let k be the time at which the tank becomes empty. Write, but do not solve, an equation involving an integral expression that can be used to find the value of k.

Learn more about the water rate in the tank at https://brainly.com/question/28740063

#SPJ4

Answer:

(a) The kinetic energy of the particle will decrease if the particle's velocity changes from -3 m/s to -2 m/s.

(b) The kinetic energy of the particle will increase if the particle's velocity changes from -2 m/s to 2 m/s.

(c) The work done on the particle in both situations is positive. This is because work is the energy transferred to or from a system and the kinetic energy of the particle increases in both cases, indicating energy was transferred to the particle.

(a) The marginal cost function is MC = 3Q + 464.

(b) The marginal cost function is MC = 160 + 5 + 6Q + 6Q^2.

The marginal cost (MC) of a product is the change in the total cost of producing an additional unit of the product.

(a) AC = 1.5Q + 4 + 460

The total cost (TC) of producing Q units is given by:

TC = AC * Q

TC = (1.5Q + 4 + 460) * Q

TC = 1.5Q^2 + 4Q + 460Q

TC = 1.5Q^2 + 464Q + 460

The marginal cost function is given by the derivative of the total cost function with respect to Q:

MC = dTC/dQ

MC = d/dQ (1.5Q^2 + 464Q + 460)

MC = 3Q + 464

b) AC = 160 + 5 + 3Q + 2Q²

The total cost of producing Q units is given by:

TC = AC * Q

TC = (160 + 5 + 3Q + 2Q^2) * Q

TC = 160Q + 5Q + 3Q^2 + 2Q^3

The marginal cost function is given by the derivative of the total cost function with respect to Q:

MC = dTC/dQ

MC = d/dQ (160Q + 5Q + 3Q^2 + 2Q^3)

MC = 160 + 5 + 6Q + 6Q^2.

Learn more about marginal cost here: https://brainly.com/question/17230008

#SPJ1

The maximum height reached is approximately 101 meters above the ground.

Using this equation, we can solve for the time in the air, which turns out to be approximately 4.06 seconds. To find the range of the objects, we can use the horizontal component of the velocity of the cannonball, which is given by :

[tex]v = v 0 cos(theta),[/tex]

where v0 is the initial velocity of the cannonball and theta is the angle of elevation. We can use the equation of motion for the vertical component of the motion, which is given by:

[tex]height = v0y * t + (1/2) * g * t^2,[/tex]

where v0y is the initial vertical velocity and g is the acceleration due to gravity.

To know more about  initial vertical velocity, here

https://brainly.com/question/18965435

#SPJ4

The release of the kinetic energy in a crash is what caused vehicles to be damaged or destroyed and the occupants injured or killed.

The energy an object has as a result of motion is known as kinetic energy in physics. It is described as the effort required to move a mass-determined body from rest to the indicated velocity. The body holds onto the kinetic energy it acquired during its acceleration until its speed changes.

We deduct the initial energy from the end energy to get the change in kinetic energy.

When a particle with mass m starts moving in a straight line, the rate of change of kinetic energy is equal to n times (n is a constant with the proper dimension).

Learn more about kinetic energy here brainly.com/question/26472013

#SPJ4

Answer:

Explanation:

Here is the definition of each variable used in the expression for the electric field strength:

• r: radial distance from the center of the shell to the point where the electric field strength is being calculated

• a: radius of the shell

• b: thickness of the shell

• ρ_0: charge density in the shell

• ε_0: permittivity of free space, a constant that relates the electric flux density to the electric field strength. Its value is approximately 8.854 x 10^(-12) C^2/Nm^2.

• E: electric field strength, a vector quantity that describes the force experienced by a unit positive test charge placed at a particular point in an electric field.

• ∇: the gradient operator, a vector differential operator that describes the rate of change of a scalar field with respect to position.

• ∫: the definite integral symbol, denoting the sum of an infinite number of infinitesimal quantities over a specified range.

• dr': infinitesimal element of the radial distance used in the integration over the shell.

The electric field strength in a region is given by the gradient of the electric potential, V, in that region. The electric potential is related to the charge distribution, ρ, by the Poisson equation:

∇^2V = -(1/ε_0) * ρ

where ε_0 is the permittivity of free space.

If we assume the charge distribution is spherically symmetric, such that ρ = ρ(r), we can express the electric potential as:

V(r) = (1/4πε_0) * ∫(ρ(r')/|r-r'|) dV'

We can simplify this expression by assuming that the charge distribution is confined to a thin shell of radius a and thickness 2b, so that ρ(r) = ρ_0 for a-b <= r <= a+b and ρ(r) = 0 elsewhere. The electric potential in the region a can then be calculated by integrating over the shell:

V(r) = (1/4πε_0) * ρ_0 * ∫_{a-b}^{a+b} (1/|r-r'|) * dr'

To find the electric field strength, we need to take the gradient of the electric potential:

E = -∇V

Substituting in the expression for the electric potential, we get:

E = -∇[(1/4πε_0) * ρ_0 * ∫_{a-b}^{a+b} (1/|r-r'|) * dr']

So, the electric field strength in the region a is proportional to the gradient of the integral of the charge distribution over the shell, and is expressed in terms of the radius, a, the thickness, b, the charge density, ρ_0, and the permittivity of free space, ε_0.

Answer:

Explanation:

The problem you're describing involves two blocks connected by a rope over a pulley, with each block resting on a separate incline plane. The acceleration of each block and the tension in the rope can be determined using the principles of dynamics and conservation of energy.

Let's call the masses of the two blocks m1 and m2, the incline angles of the two planes θ1 and θ2, and the acceleration of each block a1 and a2.

The net force on each block is given by the sum of the gravitational force, the normal force, and the tension in the rope.

For block 1:

m1 * g * sin(θ1) - m1 * a1 = T

For block 2:

m2 * g * sin(θ2) - m2 * a2 = -T

where g is the acceleration due to gravity and T is the tension in the rope.

From these equations, we can see that the tension in the rope is equal in magnitude but opposite in direction for each block. The acceleration of each block can be found by rearranging the equations and solving for a1 and a2.

The condition for block 2 to be moving down its incline plane is that the net force on the block must be in the direction of motion, which means that the tension in the rope must be less than the gravitational force acting on the block. This can be expressed as:

T < m2 * g * sin(θ2)

Here is a definition of each variable in the problem:

m1: mass of block 1

m2: mass of block 2

θ1: incline angle of the first plane

θ2: incline angle of the second plane

a1: acceleration of block 1

a2: acceleration of block 2

g: acceleration due to gravity

T: tension in the rope

I hope this helps! Let me know if you have any other questions or if you need further clarification.

The intensity level of the siren at a distance of 100m from the fire truck is 60 dB.

The decibel scale used to quantify a sound wave's energy or strength is known as the intensity level (dB). The sound pressure level is measured using a logarithmic scale in comparison to a reference sound level. The sound gets louder as the intensity level rises. The human ear can hear noises between the threshold of hearing (0 dB) to 120 dB. (threshold of pain). Maintaining safe noise levels is crucial because prolonged exposure to loud noises can cause hearing loss or injury. In order to assure the correct design and maintenance of structures, machinery, and equipment, understanding the intensity level is crucial in disciplines like engineering, acoustics, and environmental health and safety.

The intensity level of a sound wave decreases with distance from the source according to the inverse-square law, which states that the intensity is inversely proportional to the square of the distance. Therefore, if the distance from the source is increased by a factor of 10 (from 10m to 100m), the intensity level will decrease by a factor of 10² = 100. To calculate the intensity level at a distance of 100m, we can use the following formula:

IL2 = IL1 - 20 log (d2/d1)

where IL1 is the initial intensity level (80 dB), d1 is the initial distance (10 m), d2 is the new distance (100 m), and IL2 is the new intensity level.

Now,

IL2 = 80 dB - 20 log (100/10)

IL2 = 80 dB - 20 log (10)

IL2 = 80 dB - 20 x 1

IL2 = 60 dB

To know more about the intensity level, check out:

https://brainly.com/question/30101270

#SPJ4

The ball will rise to a height of approximately 31.25 meters.

First we can use the concept of energy conservation. Initially, the baseball has kinetic energy due to its motion, and as it rises, this kinetic energy is converted into potential energy due to its increased height.

The sum of the kinetic and potential energy of the baseball must remain constant, so we can use this principle to determine the maximum height reached by the ball.

The formula for kinetic energy is:

KE = 0.5 x m x v^2

where m is the mass of the ball (0.4 kg) and v is the velocity of the ball (25 m/s).

The formula for potential energy is:

PE = m x g x h

where m is the mass of the ball, g is the acceleration due to gravity (9.8 m/s^2), and h is the height of the ball.

Since the total energy is conserved, we can set the initial kinetic energy equal to the final potential energy and solve for h:

0.5 x m x v^2 = m x g x h

0.5 x 0.4 kg x (25 m/s)^2 = 0.4 kg x 9.8 m/s^2 x h

h = (0.5 x (25 m/s)^2) / (9.8 m/s^2)

h = 31.25 m

Therefore, the ball will rise to a height of approximately 31.25 meters.

Learn more about energy conservation here : brainly.com/question/18285044

#SPJ1

"The angular resolution of the Hubble Space Telescope is better for shorter (bluer) wavelengths of light than for longer (redder) wavelengths of light.

The large research observatories on mauna kea use giant reflecting telescope.

Spectrograph, separate the various colours of light, allowing astronomers to determine stellar composition and many other stellar properties.

The twin 10-m keck telescopes can work together to obtain better angular resolution through a technique known as interferometry.

The Chandra X-ray observatory focuses X rays with grazing incident mirrors.

A 10-meter telescope has a larger light-collecting area than a 4-meter telescope. Galileo's telescope designs using lenses were examples of reflecting telescope."

The tool that is used to display a magnified view of a distant object is a telescope.

There are several telescope kinds that are utilised for various tasks.

The Hubble telescope and its best resolution cameras produce an angular resolution of around 0.04 arc seconds in visible light (at wavelengths close to 500 nm). The human eye can distinguish between objects separated by 40 arc seconds or less.

Astronomers can divide light from space into a spectrum and analyse its spectral lines to determine what substances are released or absorbed using specialised tools like a spectrograph or spectroscope.

By seeing at shorter wavelengths and extending the distance between telescopes, one can acquire a finer angular resolution.

To know more about telescopes:

https://brainly.com/question/15670718

#SPJ4

If a graded receptor potential made the resting membrane potential of the axon more negative (for example, -70 mV changes to 75 m), it would be more difficult for this axon to reach the threshold voltage (option D)

The resting membrane potential will become less negative as the extracellular K+ concentration rises.

Because the negative charge inside the cell exceeds the positive charge outside, the resting membrane potential is negative.

The distinction between the inside and outside of the cell is lessened as a result.

The resting membrane potential would be impacted by a change in Na+ or K+ conductance.

Since the membrane is more permeable to K+, a change in K+ conductance would have a bigger impact on resting membrane potential than a change in Na+ conductance.

Learn more about membrane potential here: https://brainly.com/question/30433151

#SPJ4

The prediction of the combined (net) force on the cart is towards the left direction.

Net Force, which is essentially the total of all the forces operating on an item, is the combination or consequence of those forces.

Balanced forces are those acting on an item that add up to a net force of zero. The velocity of an object is unaffected by balanced forces, as seen in the illustration on the page opposite. Unbalanced forces are those acting on an item that add together to provide a net force that is not zero.

Motion is toward right but the cart is slowing down so the cart is accelerating towards left,

Now F = ma

Since, acceleration is to the left hence the net force is also to the left.

Learn more about Combined force:

https://brainly.com/question/28969457

#SPJ4

The following situations are similar to Copernicus's explanation for the retrograde motion:

A runner on an inner track lapping a slower runner on an outer track.

A fire truck overtaking and passing other vehicles on the road.

When a planet appears to be moving backward in its orbit when viewed from Earth, this is known as retrograde motion. It happens when Earth crosses in front of a slower-moving outer planet or when an inner planet catches up to and passes Earth. As it moves in contrast to the background stars, the planet appears to move in a loop or zigzag pattern. Ancient astronomers initially noticed retrograde motion and thought the planets were moving haphazardly or in the opposite direction. However, it is now known that this phenomenon is an optical illusion brought on by the planet's orbit differing from Earth's orbit in both speed and direction. Astronomers use the notion of retrograde motion to better comprehend the dynamics of our solar system.

To know more about retrograde motion, check out:

https://brainly.com/question/29823621

#SPJ1

A point between two opposite charges is where the net electric field is zero. The electric field due to many charges can be calculated by computing the individual electric fields due to each charge then vector summing them.

I need to be aware of the charges' placements and magnitudes in order to fix this issue. I can't offer a precise answer without this information. I can offer the broad strategy for resolving the issue, though.

We must apply Coulomb's law to determine the electric field where particle x or y is located. The electric field produced by a point charge Q at a distance r is described by Coulomb's law as follows:

E = kQ/r^2

where k equals 8.9910-9 Nm2/C2, the Coulomb constant. In order to determine the electric field due to each charge independently and then add them vectorially, we must first determine the c due to each charge at the location of particle x or y.

Learn more about Coulomb's law here:

https://brainly.com/question/9261306

#SPJ4

A spacecraft can reduce its speed during a trip to Mars by firing reverse rockets to increase force acting opposite of the direction of travel.

option C.

To reduce the speed of a spacecraft during a trip to Mars, the most common method is to fire reverse rockets, also known as braking thrusters.

These thrusters are used to generate a force that acts in the opposite direction of the spacecraft's motion, slowing it down. This is called a deceleration burn, and it is an important step in the process of entering into orbit around a planet or landing on its surface.

The reverse thrust slows down the spacecraft, reducing its speed and allowing it to be captured by the planet's gravity. This is crucial for the success of the mission and ensures that the spacecraft can be safely guided into orbit or landed on the surface of the planet.

Learn more about speed of spacecraft here: https://brainly.com/question/29727760

#SPJ1

The work that the electric force do on q₀ during its motion from A to B is + 0.792 J.

When an item is pushed across a specific distance by an external force, work is the quantity of energy that is transmitted to the object.

In the given problem, distance between q₀ and q is:

d₁ = √2 x 7.00 cm = 9.90 cm

The distance between q₀ and the charge q is:

d₂ = √2 x 7.00 cm = 9.90 cm

The electric force between two charges is given by Coulomb's law:

F = k × q₁× q₂ / r²

where k is the Coulomb constant, q₁ and q₂ are the charges, and r is the distance between them.

At point A, the electric force on q₀ due to the charge q is:

F1 = k × q₀ × q / d₁²

= (9.0 x 10⁹ N·m²/C²) × (-1.00 × 10⁻⁶C) × (7.00 × 10⁻⁶ C) / (9.90 x 10⁻² m)²

= -4.002 N

The negative sign indicates that the force is in the opposite direction to the displacement of q₀.

At point B, the electric force on q₀ due to the charge q is:

F2 = k × q₀ × q / d₂²

= (9.0 × 10⁹)× (-1.00 × 10⁻⁶) × (7.00 × 10⁻⁶) / (9.90 × 10⁻²)²

= -4.002 N

So, work done by a constant force:

W = F × d × cosθ

So the work done by the electric force on q₀ from A to B is:

W = F1 × d1 × cos(180) + F2 × d2 × cos(180) = (-4.002 N) × (9.90 × 10⁻² m) × (-1) + (-4.002 N) × (9.90 × 10⁻² m) × (-1) = 0.792 J

The positive value indicates that the work done by the electric force is in the direction opposite to the displacement of  q₀, which means that the electric force does negative work on q₀.

Learn more about work done, here:

https://brainly.com/question/13662169

#SPJ1

The luminosity doubles  if the voltage of the battery is doubled.

Describe luminosity.

Luminosity, which is essentially measured in joules per second or watts in SI units, refers to the total energy produced by various celestial bodies (stars, galaxies) per unit time. A light-emitting object's radiant power, which is measured in absolute terms as luminosity, is the electromagnetic power that it radiates out over time.

The brightness of the bulb increases as the voltage rises. All of the bulbs in a series circuit are turned off when one of the bulbs is unscrewed. The brightness of the bulbs in a series circuit reduces as the number of lamps increases.

P=AVI,

If V is doubled, P also becomes doubled.

To learn more about voltage use link below:
https://brainly.com/question/1176850

#SPJ1

The largest area that the window could be is when it has the maximum height and width, so

Between the interior jambs on the left and right, measure the distance horizontally with a tape measure. Shut the window and take a similar measurement in the centre of the window from jamb to jamb.

At the top of the window, measure the space between the jambs. Take the shortest reading.

Area = height x width [tex]= 160 cm x 82 cm = 13,120 cm²[/tex]

Additional heights of [tex]18, 52, 54,[/tex]And [tex]62[/tex] Inches can be added to the standard height range of 2 feet to 8 feet.

Rough openings are given in whole numbers, and the actual window size is calculated by subtracting 1/2 inch from each rough opening size.

Area = height x width [tex]= 150 cm x 70 cm = 10,500 cm²[/tex]

Therefore, The smallest area that the window could be is when it has the minimum height and width, so:

Learn more about height here:

https://brainly.com/question/28211216

#SPJ4

If a machine does some kind of work faster, then this mean that the power rating of the machine is higher. Power rating is directly proportional to the work done.

The power rating of an equipment is the highest power input which is allowed to flow through a particular equipment. According to the particular discipline, the power may be referred to as the electrical or mechanical power.

Work is proportional to the energy, and higher power means higher energy present in an object. If a machine does work at a faster rate, this means that it has high power rating.

Learn more about Power rating here:

https://brainly.com/question/26256725

#SPJ1

The time will take for each persons to make a round trip will be=2.5 hours for pier A and 0.75 hours for pier B

Let's first find the time it takes for the rower to make the round trip. The rower's velocity relative to the water is 4 km/h, but the water is flowing at 2.8 km/h in the direction from A to B, so the rower's velocity relative to the shore is:

v_r = 4 km/h - 2.8 km/h = 1.2 km/h

The distance the rower travels is 2 * 1500 m = 3000 m, or 3 km. Therefore, the time it takes for the rower to make the round trip is:

t_r = 3 km / 1.2 km/h = 2.5 hours

Now let's find the time it takes for the walker to make the round trip. The walker's velocity is 4 km/h, so the time it takes for them to walk 1500 m from A to B is:

t_w = 1500 m / 4 km/h = 0.375 hours

The walker then turns around and walks 1500 m back to A, which takes another 0.375 hours. Therefore, the total time it takes for the walker to make the round trip is:

t_w = 2 * 0.375 hours = 0.75 hours

So the rower takes 2.5 hours and the walker takes 0.75 hours to make the round trip from pier A to pier B and back.

To know more about round trip visit,

https://brainly.com/question/17482126

#SPJ4

The early Greek epicycle model was preferred over the heliocentric model of the solar system because it provided a more precise account of observed planetary motions.

Although Copernicus' system does not require epicycles to produce retrograde motion, he was forced to use them nonetheless because of his insistence on uniform circular motion in order for his model to produce accurate predictions (i.e., to "preserve appearances"), particularly to replicate the planets' non-uniform speeds.

Because its proponents were unable to explain why, the heliocentric, or Sun-centered, model of the solar system never achieved widespread acceptance.

To know more about solar system visit:-

https://brainly.com/question/12075871

#SPJ4

The top of the 12 ft ladder that leans against the house, and the bottom of the ladder is 9 ft from the side of the house = 7.9 ft

The triangle formed by the ladder must be a right angle with a hypotenuse (Side opposite to right angle) of 12 feet since the side of the house must be vertical to the ground to form a right angle.

Let x represent how high the ladder's top is above the ground.

We have the following using the Pythagoras theorem of right triangles:

c² = a² + b²

12² = 9² + x²

x² = 144 - 81

= 63

Hence,

x = √63

= 7.9 ft

The question is incomplete, it should be:

A 12 - ft ladder leans against the side of a house. the bottom of the ladder is 9 ft from the side of the house. how high is the top of the ladder from the ground? if necessary, round your answer to the nearest tenth.

Learn more about Pythagorean theorem here: https://brainly.com/question/343682

#SPJ4

Answer:

A person walking, a soaring baseball, a crumb falling from a table and a charged particle in an electric field are all examples of kinetic energy at work.

Explanation:

Walking and running. Cycling. In a windmill, when the moving air hits the blades, it causes rotation which ultimately leads to the generation of electricity. In a hydropower plant, when the kinetic energy of the moving water hits the turbine the kinetic energy of the water gets converted to mechanical energy.