A gas moxture of helium, nitrogen, argon, and oxgeen has a total pressure of 17.2pi. The partial pressure of halium is 2,9psL. The partial pressure of nitrogen is 10.7 pii. The partial pressure of argon is 2.7 psi. What is the partial pressure of exygen in the mixdure fin piab?

Answers

Answer 1

The partial pressure of oxygen in the mixdure fin piab is 0.9 psi.

To calculate the partial pressure of oxygen, we must first remember that total pressure equals the sum of the partial pressures of all the gases in the mixture:

Total pressure = helium partial pressure + nitrogen partial pressure + argon partial pressure + oxygen partial pressure

Substituting the following values:

17.2 psi = 2.9 psi + 10.7 psi + 2.7 psi + oxygen partial pressure

Calculating the partial pressure of oxygen:

oxygen partial pressure = 17.2 psi - 2.9 psi - 10.7 psi - 2.7 psi = 0.9 psi

The partial pressure of oxygen in the mixture is thus 0.9 psi.

For such more question on pressure:

https://brainly.com/question/24719118

#SPJ11

Answer 2

The partial pressure of oxygen in the mixture, given that helium has a partial pressure of 2.9 psi, is 0.9 psi

How do i determine the partial pressure of oxygen?

The following data were obtained from the question:

Total pressure =  17.2 psiPartial pressure of helium = 2.9 psiPartial pressure of nitrogen = 10.7 psiPartial pressure of argon = 2.7 psiPartial pressure of oxygen =?

The partial pressure of oxygen can be obtained as follow:

Total pressure = Partial pressure of helium + Partial pressure of notrogen + Partial pressure of argon + Partial pressure of oxygen

17.2 = 2.9 + 10.7 + 2.7 + Partial pressure of oxygen

17.2 = 16.3 + Partial pressure of oxygen

Collect like terms

Partial pressure of oxygen = 17.2 - 16.3

Partial pressure of oxygen = 0.9 psi

Thus, the partial pressure of oxygen in the mixture is 0.9 psi

Learn more about partial pressure:

https://brainly.com/question/15577259

#SPJ4


Related Questions

Calculate deltaH° fornthe following reaction: IF7(g) + I2(g) --> IF5(g) + 2IF(g) using the following information: IF5. -840 IF7. -941 IF. -95

Answers

Therefore, the standard enthalpy change for the given reaction is -947 kJ/mol.

To calculate deltaH° for the given reaction, we need to use the Hess's law of constant heat summation. Hess's law states that the total enthalpy change of a reaction is independent of the pathway taken and depends only on the initial and final states of the system.
We can break down the given reaction into a series of reactions, for which we have the enthalpy values.
First, we need to reverse the second equation to get I2(g) --> 2IF(g), and change the sign of its enthalpy value:
I2(g) --> 2IF(g)     deltaH° = +95 kJ/mol
Next, we can add this equation to the first equation, in which IF7(g) is reduced to IF5(g):
IF7(g) + I2(g) --> IF5(g) + 2IF(g)
IF7(g) --> IF5(g) + 2IF(g)   deltaH° = (+840 kJ/mol) + (2 x (-941 kJ/mol)) = -1042 kJ/mol
Finally, we can substitute the values we have calculated into the overall reaction equation:
deltaH° = (-1042 kJ/mol) + (+95 kJ/mol)
deltaH° = -947 kJ/mol
Therefore, the standard enthalpy change for the given reaction is -947 kJ/mol.
Note that the answer is a negative value, indicating that the reaction is exothermic (releases heat). Also, make sure to provide a "long answer" to fully explain the process used to calculate deltaH°.

To know more about enthalpy change visit:-

https://brainly.com/question/29556033

#SPJ11

draw the epoxide and organometallic reagent needed to synthesize the following alcohol. indicate stereochemistry where appropriate.

Answers

Synthesizing alcohols from epoxides and organometallic reagents involves the opening of the epoxide ring by the organometallic reagent, resulting in the formation of a diol. The stereochemistry of the product depends on the starting materials and reaction conditions.

Epoxides are three-membered cyclic ethers that contain a ring of two carbon atoms and one oxygen atom. They are highly reactive due to the ring strain and the electron-rich oxygen atom, making them useful intermediates in organic synthesis.

Organometallic reagents are compounds that contain a metal atom covalently bonded to a carbon atom, which is usually an alkyl or aryl group. Common examples include Grignard reagents, which are formed by reacting an alkyl or aryl halide with magnesium metal in the presence of an ether solvent.

To synthesize alcohol from an epoxide and an organometallic reagent, the epoxide is first opened by the nucleophilic attack of the organometallic reagent on the less hindered carbon atom of the epoxide ring. This results in the formation of a new carbon-carbon bond and the opening of the ring, leading to the formation of a diol.

The stereochemistry of the product depends on the stereochemistry of the starting materials and the reaction conditions. If the organometallic reagent is chiral and reacts with the epoxide in a stereospecific manner, then the product will have a specific stereochemistry. However, if the reaction is not stereospecific, then the stereochemistry of the product will be a mixture of isomers.

To learn more about organometallic reagents

https://brainly.com/question/29980092

#SPJ4

in the electron configuration of inner transition metal pr, the designation of the orbital with the highest energy is ____.4f6p2d7f5s

Answers

In the electron configuration of inner transition metal pr, the designation of the orbital with the highest energy is 5s.

The electron configuration of Pr is [Xe]4f³ 6s², where [Xe] represents the electron configuration of the noble gas xenon. The inner transition metals are characterized by the filling of their f-orbitals, which are located below the d-orbitals in the periodic table.

In Pr, the 4f subshell is partially filled with three electrons, and the 6s subshell is filled with two electrons. Therefore, the orbital with the highest energy is the next available orbital after 6s, which is 5p.

However, the given electron configuration includes only up to 5s, indicating that 5s is the highest energy orbital present in the configuration.

To know more about electron configuration, refer here:

https://brainly.com/question/31812229#

#SPJ11

how many of the following three choices have tetrahedral electron geometry?HCNClF3ClO4-a. 0b. 1c. 2d. 3

Answers

ClO4 have tetrahedral electron geometry, To determine the electron geometry of a molecule, we need to first determine its molecular geometry by considering the arrangement of the atoms and lone pairs around the central atom.

The correct option is :- (B)

If the arrangement is tetrahedral, then the electron geometry is also tetrahedral.

HCN: The central atom is carbon, which has three groups bonded to it (one hydrogen, one carbon, and one nitrogen) and no lone pairs. The molecular geometry is therefore trigonal planar, not tetrahedral.

ClF3: The central atom is chlorine, which has three fluorine atoms bonded to it and two lone pairs. The arrangement is trigonal bipyramidal, and the molecular geometry is T-shaped, not tetrahedral.

ClO4-: The central atom is chlorine, which has four oxygen atoms bonded to it and no lone pairs. The arrangement is tetrahedral, and so is the molecular geometry. Therefore, only one of the three choices, ClO4-, has a tetrahedral electron geometry.

To know more about tetrahedral refer here :-

https://brainly.com/question/18612295#

#SPJ11

119/50 Snis the chemical symbol for Tin. Tin is found in cool stars in its tripley ionized state. How many protons, neutron, and electrons does this ion have in this state?options:119 p, 50 n, 47 e50 p, 119 n, 116 e50 p, 69 n, 47 e50 p, 69 n, 44 e

Answers

The correct option is: 50 p, 69 n, 47 e.

The chemical symbol for Tin is Sn and its atomic number is 50, which means it has 50 protons in its nucleus.

The given ion, Sn3+, means that three electrons have been removed from the neutral atom of Tin. Therefore, the ion would have 50 protons, 69 neutrons (as the mass number is 119, given in the chemical symbol), and 47 electrons. This is because when three electrons are removed from the neutral atom, the ion has a positive charge, which means it has lost three negatively charged electrons and is left with 47 electrons. It is interesting to note that Tin's triple ionization state is found in cool stars, where the temperature is lower than that of the Sun. This shows that different states of ions and different elements can exist in various states in different environments.

The chemical symbol for Tin is represented as 119/50 Sn. In this notation, the number at the bottom (50) indicates the atomic number, which is the number of protons in the nucleus of the atom. The number at the top (119) represents the mass number, which is the sum of protons and neutrons.
In its triply ionized state, Tin has lost three electrons, but the number of protons and neutrons remains the same. To calculate the number of neutrons, subtract the atomic number (protons) from the mass number: 119 - 50 = 69 neutrons.
SO, in its triply ionized state, Tin has 50 protons, 69 neutrons, and 47 electrons (since it has lost 3 electrons).

To know more about tin refer: https://brainly.com/question/31605969?referrer=searchResults

#SPJ11

What carboxylic acid and alcohol are needed to synthesize benzyl acetate?

Answers

Acetic acid and benzyl alcohol are needed to synthesize benzyl acetate through an esterification reaction.

To synthesize benzyl acetate, you will need the carboxylic acid , acetic acid and the alcohol benzyl alcohol. Here's a step-by-step explanation:

1. Identify the carboxylic acid: Acetic acid (CH3COOH) is required for this synthesis. It contains a carboxyl group (COOH) that will react with the alcohol.

2. Identify the alcohol: Benzyl alcohol (C6H5CH2OH) is needed. It contains a hydroxyl group (OH) that will react with the carboxylic acid.

3. Perform the esterification reaction: Combine acetic acid and benzyl alcohol in the presence of an acid catalyst (such as sulfuric acid) to form benzyl acetate (C6H5CH2OOCCH3) and water as a byproduct.

In summary, acetic acid and benzyl alcohol are needed to synthesize benzyl acetate through an esterification reaction.

Learn more about carboxylic acid here,

https://brainly.com/question/26855500

#SPJ11

Specify the number of possible isomers of nitrobenzoic acid. 6 Write the name of one of these isomers. Abbreviate ortho (o), meta (m) and para (p), no italics, if you elect to use these terms. Fill in the blank 2 o-nitrobenzoic acid Specify the number of possible isomers of tribromobenzoic acid. 6 Write the name of one of these isomers. Abbreviate ortho (o), meta (m) and para (p), no italics, if you elect to use these terms. Fill in the blank 4 2,4,6-tribromobenzoic acid

Answers

Nitrobenzoic acid can have a total of 6 possible isomers. One of these isomers is o-nitrobenzoic acid.Tribromobenzoic acid can have a total of 4 possible isomers. One of these isomers is 2,4,6-tribromobenzoic acid.

Isomers are different compounds with the same molecular formula but different arrangements or orientations of atoms. In the case of nitrobenzoic acid, the isomers differ in the position of the nitro (-NO2) group on the benzene ring. The "o-" in o-nitrobenzoic acid indicates that the nitro group is located in the ortho position, which is adjacent to the carboxyl group (-COOH) on the benzene ring.

Similarly, in tribromobenzoic acid, the isomers differ in the position of the bromine (-Br) substituents on the benzene ring. The numbering in 2,4,6-tribromobenzoic acid indicates that the bromine atoms are located in the 2nd, 4th, and 6th positions on the benzene ring.

Overall, these compounds demonstrate the concept of isomerism, where different arrangements of atoms lead to distinct chemical structures and properties.

To learn more about Nitrobenzoic acid click here : brainly.com/question/13142414

#SPJ11

The bromine-82 nucleus has a half-life of 1.0 × 10^3 min. If you wanted 1.0 g 82Br and the delivery time was 3.0 days, what mass of NaBr should you order (assuming all of the Br in the NaBr was 82Br)?

Answers

We need to order 0.0152 g of NaBr to obtain 1.0 g of 82Br with a half-life of 1.0 × 10³ min and a delivery time of 3.0 days.

To obtain 1.0 g of 82Br with a half-life of 1.0 × 10³ min and a delivery time of 3.0 days, we need to calculate the required amount of NaBr.

First, we need to calculate the decay constant of 82Br:

decay constant (λ) = ln(2) / half-life

= ln(2) / (1.0 × 10³ min)

= 6.93 × 10⁻⁴ min⁻¹

Next, we need to calculate the total number of decays that will occur during the delivery time of 3.0 days:

total number of decays = initial number of 82Br atoms × e(-λ × time)

To calculate the initial number of 82Br atoms, we can use the Avogadro's number:

initial number of 82Br atoms = (1.0 g / molar mass of 82Br) × Avogadro's number

= (1.0 g / 81.9167 g/mol) × 6.022 × 10²³/mol

= 7.286 × 10²¹ atoms

Using this value and the delivery time of 3.0 days (converted to minutes), we can calculate the total number of decays:

total number of decays = 7.286 × 10²¹ × e^(-6.93 × 10⁻⁴ min⁻¹ × 3.0 days × 24 hours/day × 60 min/hour)

= 2.94 × 10²¹ decays

Since each decay of 82Br results in the formation of one 82Br nucleus, we need to order an amount of NaBr containing 2.94 × 10²¹ atoms of 82Br. The molar mass of NaBr is:

molar mass of NaBr = 102.89 g/mol

Therefore, the mass of NaBr required is:

mass of NaBr = (2.94 × 10²¹ atoms / Avogadro's number) × molar mass of NaBr

= (2.94 × 10²¹ / 6.022 × 10²³) × 102.89 g

= 1.52 × 10⁻² g

learn more about molar mass here:

https://brainly.com/question/22997914

#SPJ11

A gauge pressure is measuring 4. 66 atm of pressure inside a basketball. What is the absolute pressure inside the basketball?

Answers

The absolute pressure inside the basketball can be calculated by adding the atmospheric pressure to the gauge pressure. Atmospheric pressure is typically around 1 atm at sea level.

Therefore, the absolute pressure inside the basketball can be calculated as the sum of the gauge pressure and the atmospheric pressure.

In this case, the gauge pressure is given as 4.66 atm. Assuming atmospheric pressure is 1 atm, the absolute pressure inside the basketball would be:

Absolute pressure = Gauge pressure + Atmospheric pressure

Absolute pressure = 4.66 atm + 1 atm

Absolute pressure = 5.66 atm

Therefore, the absolute pressure inside the basketball is 5.66 atm. This represents the total pressure exerted by the gas inside the basketball, including both the gauge pressure and the atmospheric pressure.

To learn more about absolute pressure click here :

brainly.com/question/13390708

#SPJ11

A 3.75-g sample of limestone (caco3) contains 1.80 g of oxygen and 0.450 g of carbon. what is the percent o and the percent c in limestone?

Answers

The percent oxygen in limestone is 48% and the percent carbon is 12%.

To find the percent oxygen and carbon in limestone, we need to use the formula:
% element = (mass of element / total mass of compound) x 100%
First, we need to calculate the mass of calcium in the sample:
Mass of calcium = total mass of compound - mass of oxygen - mass of carbon
Mass of calcium = 3.75 g - 1.80 g - 0.450 g
Mass of calcium = 2.52 g
Now we can calculate the percent oxygen:
% O = (1.80 g / 3.75 g) x 100%
% O = 48%
And the percent carbon:
% C = (0.450 g / 3.75 g) x 100%
% C = 12%
Therefore, the percent oxygen in limestone is 48% and the percent carbon is 12%.
To know more about limestone visit:

https://brainly.com/question/30717890

#SPJ11

what is the balanced chemical reaction that catalase regulates

Answers

Catalase is an enzyme that regulates the decomposition of hydrogen peroxide into water and oxygen. The balanced chemical equation for this reaction is:

2 H2O2 → 2 H2O + O2

In this reaction, two molecules of hydrogen peroxide (H2O2) react to form two molecules of water (H2O) and one molecule of oxygen gas (O2). This reaction is highly exothermic, releasing a large amount of energy in the form of heat and light.

Without the presence of catalase, this reaction would occur spontaneously and release a significant amount of harmful reactive oxygen species (ROS) that could damage the cell and its components.

Catalase plays a critical role in regulating this reaction by catalyzing the breakdown of hydrogen peroxide into water and oxygen. The catalytic activity of catalase allows it to significantly increase the rate of the reaction, while at the same time reducing the harmful effects of the ROS produced during the reaction.

Specifically, catalase converts the highly reactive hydrogen peroxide molecules into water and oxygen gas through a two-step process.

In the first step, catalase binds to a molecule of hydrogen peroxide, causing it to break down into a molecule of water and an oxygen molecule that is bound to the enzyme. In the second step, the bound oxygen molecule is released from the enzyme, allowing it to react with another molecule of hydrogen peroxide and continue the cycle.

Overall, the catalytic activity of catalase allows it to efficiently and safely regulate the decomposition of hydrogen peroxide into water and oxygen gas, preventing the accumulation of harmful ROS and protecting the cell from oxidative damage.

To know more about decomposition refer here

https://brainly.com/question/8009068#

#SPJ11

write the formula for a complex formed between ni2 and cn− with a coordination number of 4

Answers

The formula for the complex formed between Ni2+ and CN- with a coordination number of 4 is [Ni(CN)4]2-.
In this complex, Ni2+ ion acts as the central metal ion and four CN- ions act as ligands.

Each CN- ion donates one electron pair to the central Ni2+ ion forming four coordinate covalent bonds. The resulting complex has a tetrahedral geometry with a coordination number of 4.The negative charge on the complex ion is due to the presence of two extra electrons on the complex as a result of the coordination of four CN- ligands. The overall charge of the complex ion is balanced by the 2- charge on the complex ion.
 

In this complex, Ni²⁺ is the central metal ion, and CN⁻ is the ligand. The coordination number of 4 indicates that there are four CN⁻ ligands attached to the Ni²⁺ ion.To write the formula, you enclose the central metal ion and the ligands in square brackets, followed by the overall charge of the complex. In this case, Ni²⁺ has a +2 charge, and there are four CN⁻ ligands with a -1 charge each. Thus, the overall charge of the complex is 2 - 4 = -2, and the formula is [Ni(CN)₄]²⁻.

To know more about metal visit:

https://brainly.com/question/29400906

#SPJ11

Structure of 2,4,5-Trimethyl-4-(1-methylethyl)heptane​

Answers

The structure of 2,4,5-trimethyl-4-(1-methylethyl)heptane can be represented as a branched hydrocarbon with a seven-carbon chain. It contains three methyl groups ([tex]CH_{3}[/tex]) attached to carbons 2, 4, and 5, and an isopropyl group ([tex]CH(CH_{3}) _{2}[/tex]) attached to carbon 4.

To draw the structure of 2,4,5-trimethyl-4-(1-methylethyl)heptane, we start with a seven-carbon chain. The carbons are numbered consecutively, with the substituents indicated by the numbers. Starting from the main chain, we have three methyl groups (CH_{3}) attached to carbons 2, 4, and 5. This means that there are additional methyl groups branching off from these carbons.

Additionally, at carbon 4, we have an isopropyl group, also known as 1-methylethyl group (CH(CH_{3}) _{2}). The isopropyl group consists of three carbon atoms, with the central carbon attached to two methyl groups. Overall, the structure of 2,4,5-trimethyl-4-(1-methylethyl)heptane can be visualized as a complex, branched hydrocarbon with multiple methyl groups and an isopropyl group attached to a seven-carbon chain.

Learn more about hydrocarbon here: https://brainly.com/question/30666184

#SPJ11

What is the molar solubility of AgCl in 0.10 M NaCN if thecolorless complex ion Ag(CN)2- forms? Ksp for AgCl is 1.8 x 10^-10and Kf for Ag(CN)2- is 1.0 x 10^21.
For the right answer I will leave maximum feedback. Need itfast, thanks.
The options are: .a. 20Mb. 40Mc. 50Md. 10M

Answers

The molar solubility of AgCl in 0.10 M NaCN is c. 50 M.

The formation of Ag(CN)₂⁻complex ion reduces the concentration of Ag+ ions available to form AgCl precipitate, thus increasing the solubility of AgCl. Using the equilibrium constants for the dissolution of AgCl and the formation of Ag(CN)₂⁻ complex, we can calculate the molar solubility of AgCl in the presence of NaCN. The molar solubility is found to be 50 M, which is option C.

It is important to note that the high stability constant of Ag(CN)₂⁻compared to the low solubility product constant of AgCl leads to the formation of the complex ion and hence increased solubility of AgCl in the presence of NaCN.

Therefore, the correction option is c. 50 M.

To learn more about molar solubility here

https://brainly.com/question/28170449

#SPJ4

for each of the metabolic transformations (a) through (d), determine whether the compound on the left has undergone oxidation or reduction. balance each transformation by inserting

Answers



Metabolic transformations involve the conversion of one compound into another through a series of chemical reactions.

In order to determine whether a compound has undergone oxidation or reduction, we need to look at the changes in the oxidation state of the atoms involved.



Oxidation is the loss of electrons or an increase in oxidation state, while reduction is the gain of electrons or a decrease in oxidation state.



(a) Compound on the left: C3H8O. This compound has been transformed into C3H6O through the loss of two hydrogen atoms. This loss of hydrogen atoms is a clear indication of oxidation, as hydrogen is a reducing agent.



The balanced transformation is: C3H8O -> C3H6O + 2H+ + 2e-.



(b) Compound on the left: CH3CHO. This compound has been transformed into CH3COOH through the addition of an oxygen atom and the loss of two hydrogen atoms.

This increase in the number of oxygen atoms and the loss of hydrogen atoms are indications of oxidation.



The balanced transformation is: CH3CHO + H2O + O2 -> CH3COOH + H2O.



(c) Compound on the left: C6H12O6. This compound has been transformed into C2H5OH and CO2 through the loss of hydrogen atoms and the gain of oxygen atoms.

The loss of hydrogen atoms is a clear indication of oxidation, while the gain of oxygen atoms is a clear indication of reduction.



The balanced transformation is: C6H12O6 -> 2C2H5OH + 2CO2.



(d) Compound on the left: C5H12O. This compound has been transformed into C5H10O through the loss of two hydrogen atoms. This loss of hydrogen atoms is a clear indication of oxidation.



The balanced transformation is: C5H12O -> C5H10O + 2H+ + 2e-.



In summary, for the metabolic transformations (a) through (d), the compound on the left has undergone oxidation in all cases except for transformation (c), where it has undergone both oxidation and reduction.

By balancing each transformation, we can see that these reactions involve the transfer of electrons, which is a key feature of oxidation-reduction reactions.

To know more about Metabolic transformations refer here

https://brainly.com/question/31681301#

#SPJ11

A quantity of Xe occupies 321 mL at 300 oC and 2.09 atm. What will be the temperature if the volume is increased to 553 mL at 305 torr?259 K586 K134 K189.5 K306 K

Answers

The temperature if the volume is increased to 553 mL at 305 torr will be  189.5 K.

To solve this problem, we can use the combined gas law equation, which relates the initial and final conditions of pressure, volume, and temperature. The equation is as follows:

(P1V1/T1) = (P2V2/T2)

Where P1, V1, and T1 are the initial pressure, volume, and temperature, respectively, and P2, V2, and T2 are the final pressure, volume, and temperature, respectively.

We are given that the initial conditions are:

P1 = 2.09 atm
V1 = 321 mL
T1 = 300 K

We are also given that the final conditions are:

P2 = 305 torr (which we need to convert to atm)
V2 = 553 mL

To convert torr to atm, we divide by 760 torr/atm:

305 torr ÷ 760 torr/atm = 0.4013 atm

Substituting the values into the equation, we get:

(2.09 atm)(321 mL)/(300 K) = (0.4013 atm)(553 mL)/(T2)

Simplifying the equation, we get:

T2 = (0.4013 atm)(553 mL)(300 K)/(2.09 atm)(321 mL) = 189.5 K

Therefore, the final temperature is 189.5 K.

The question could be rephrased as:

A quantity of Xe occupies 321 mL at 300 oC and 2.09 atm. What will be the temperature if the volume is increased to 553 mL at 305 torr?

1. 259 K

2. 586 K

3. 134 K

4. 189.5 K

5. 306 K

Learn more about gas law at: https://brainly.com/question/27870704

#SPJ11

For the reaction 2A + 3B ® 4C + 5D, the rate of the reaction in terms of DA would be written as ________?

Answers

The main answer to this question is that the rate of the reaction in terms of DA would be written as -1/5(d[DA]/dt) = k[A]²[B]³, where k is the rate constant, [A] and [B] are the concentrations of A and B, and d[DA]/dt is the rate of change of the concentration of DA over time.

The explanation for this answer is that DA is a product of the reaction, so its rate of change can be expressed in terms of the rate of the reaction using stoichiometry. Since 5 moles of D are produced for every 2 moles of A consumed, the rate of the reaction in terms of DA can be written as -1/5(d[DA]/dt) = d[D]/dt = 4(d[C]/dt) + 5(d[D]/dt) = 4k[A]²[B]³ + 5(d[DA]/dt), where d[D]/dt is the rate of change of the concentration of D over time, and d[C]/dt is the rate of change of the concentration of C over time. By rearranging this equation and solving for d[DA]/dt, we can obtain the main answer given above.

For more information on stoichiometry visit:

https://brainly.com/question/30215297

#SPJ11

what are the formal charges on the central atoms in each of the reducing agents?
a. +1
b. -2
c. -1
d. 0

Answers

Finally, the reducing agent in this case has a central atom with a 0 formal charge. This means that the central atom has the same number of electrons as it would in a neutral state.

First, let's define what a reducing agent is. A reducing agent is a substance that donates electrons to another substance in a chemical reaction. In other words, it is a substance that is oxidized (loses electrons) in order to reduce (gain electrons) another substance.

Now, onto the formal charges of the central atoms in each of the reducing agents:
a. +1
The formal charge of an atom is the difference between the number of valence electrons in an isolated atom and the number of electrons assigned to that atom in a Lewis structure. In this case, the reducing agent has a central atom with a +1 formal charge. This means that the central atom has one fewer electron than it would in a neutral state.
b. -2
Similarly, the reducing agent in this case has a central atom with a -2 formal charge. This means that the central atom has two more electrons than it would in a neutral state.
c. -1
The reducing agent in this case has a central atom with a -1 formal charge. This means that the central atom has one more electron than it would in a neutral state.
d. 0
Finally, the reducing agent in this case has a central atom with a 0 formal charge. This means that the central atom has the same number of electrons as it would in a neutral state.

To know more about reducing agent visit:-

https://brainly.com/question/2890416

#SPJ11

Before you leave you need to make sure your team has enough water for everyone due to that intentionality of your journey everyone is here unexpectedly and you only have 12 empty soda cans and 150 gallon water container for the back of the Jeep you have to make sure to measure out enough water for seven day journey

Answers

To ensure that there is enough water for everyone during the seven-day journey, we need to calculate the amount of water required per person per day and then multiply it by the number of people and the number of days.

Let's assume there are "n" people in the group.

The total water required for one person per day can vary depending on factors like climate, activity level, and individual needs. On average, a person needs about 2-3 liters of water per day to stay properly hydrated.

Let's take the middle range of 2.5 liters per person per day. Multiply this by the number of people (n) to get the total water required per day for the group.

Total water required per day = 2.5 liters/person/day * n people

Now, multiply the total water required per day by the number of days (7) to get the total water required for the entire journey.

Total water required for the journey = Total water required per day * number of days

Once you have the total water required for the journey, you can check if the 150-gallon water container is sufficient.

1 gallon is equivalent to approximately 3.785 liters. Therefore, the 150-gallon water container can hold:

150 gallons * 3.785 liters/gallon = 567.75 liters

Compare the total water required for the journey with the capacity of the 150-gallon water container. If the container can hold more water than what is required, you have enough water for the journey. Otherwise, you may need to consider additional water sources or containers.

As for the 12 empty soda cans, they are not a suitable option for storing water for a journey of this length and number of people. They are not designed for long-term storage or transportation of water and may not provide an adequate volume of water. It is recommended to use appropriate water containers or bottles for storing water during the journey.

To learn more about water click here:

brainly.com/question/32195714

#SPJ11

Determine if each of the following complexes exhibits geometric isomerism. If geometric isomers exist, determine how many there are. (Hint: [Cu(NH3)4]2+ is square-planar).
No isomers, two isomers, three isomers:
[Rh(bipy)(o−phen 2]3+
[Cu(NH3)4]2+
[Co(NH3)3(bipy)Br]2+

Answers

[tex][Co(NH$_3$)$_3$(bipy)Br]$^{2+}$[/tex] is the complex that exhibits two geometric isomers.

[tex][Rh(bipy)(o-phen)$_2$]$^{3+}$:[/tex]

This complex has a square planar geometry due to the presence of two bidentate ligands, bipy and o-phen. Thus, it does not exhibit geometric isomerism.

[tex][Cu(NH$_3$)$_4$]$^{2+}$:[/tex]

This complex has a square planar geometry due to the presence of four ammonia ligands. Square planar complexes exhibit geometric isomerism when two identical ligands are positioned opposite to each other, which is not possible in this case since all four ligands are the same. Therefore, this complex does not exhibit geometric isomerism.

[tex][Co(NH$_3$)$_3$(bipy)Br]$^{2+}$:[/tex]

This complex has a tetrahedral geometry due to the presence of three ammonia ligands and one bipy ligand. Tetrahedral complexes exhibit geometric isomerism when two identical ligands are positioned across each other. In this case, the bipy ligand and the bromide ion can potentially be positioned across from each other, resulting in two possible isomers: a cis isomer and a trans isomer.

Learn more about geometric isomers here:

https://brainly.com/question/31744339

#SPJ11

which sample contains more molecules: 2.0l of cl2 at stp, or 3.0l of ch4 at 300k and 1.5atm ?

Answers

Sample of 3.0 L of CH₄ (methane) contains more molecules than 2.0 L of Cl₂ (chlorine).

To determine which sample contains more molecules, we need to use the Ideal Gas Law, which relates the number of molecules of a gas to its pressure, volume, and temperature.

The Ideal Gas Law is given by;

PV = nRT

where P is pressure of the gas in atmospheres (atm), V is volume of the gas in liters (L), n is number of moles of the gas, R is ideal gas constant (0.0821 L·atm/(mol·K)), and T is temperature of the gas in Kelvin (K).

To compare the number of molecules of Cl₂ and CH₄, we can use the following equation;

n = PV/RT

where n is number of moles of the gas.

For Cl₂ at STP (Standard Temperature and Pressure, which is 0°C and 1 atm), we have;

P = 1 atm

V = 2.0 L

T = 273 K (0°C)

n = (1 atm) x (2.0 L) / [(0.0821 L·atm/(mol·K)) x (273 K)]

n = 0.082 mol

For CH₄ at 300K and 1.5 atm, we have;

P = 1.5 atm

V = 3.0 L

T = 300 K

n = (1.5 atm) x (3.0 L) / [(0.0821 L·atm/(mol·K)) x (300 K)]

n = 0.184 mol

Therefore, even though the volume of CH₄ is greater than that of Cl₂, the number of molecules of CH₄ is higher, due to the higher pressure and temperature. Thus, 3.0 L of CH₄ contains more molecules than 2.0 L of Cl₂.

To know more about Ideal Gas Law here

https://brainly.com/question/4147359

#SPJ4

In a 10.0 L vessel at 100.0 °C, 10.0 grams of an unknown gas exert a pressure of 1.13 atm. What is the gas? Data sheet and Periodic Table a. The gas is NH3 and the molar mass is 17 g.mol-1. b. The gas is NO and the molar mass is 30 g.mol-1 c. The gas is HCN and the molar mass is 27 g.mol-1 d. The gas is NO2 and the molar mass is 46 g.mol-1

Answers

According to the given statement the gas in the vessel is HCN and the molar mass is 27 g.mol-1.

To solve this problem, we need to use the ideal gas law equation, PV=nRT. We know the volume (10.0 L), temperature (100.0 °C = 373 K), pressure (1.13 atm), and we have the molar mass of the unknown gas. We can rearrange the equation to solve for n, the number of moles of gas:
n = PV/RT
Using the given values, we get:
n = (1.13 atm x 10.0 L) / (0.08206 L•atm/mol•K x 373 K)
n = 0.038 mol
Now we can use the mass of the gas (10.0 g) and the number of moles to calculate the molar mass:
molar mass = mass / moles
molar mass = 10.0 g / 0.038 mol
molar mass = 263 g/mol
Comparing this value to the given options, we see that the only gas with a molar mass close to 263 g/mol is HCN, with a molar mass of 27 g/mol. Therefore, the gas in the vessel is HCN.
To know more about ideal gas visit :

https://brainly.com/question/28257995

#SPJ11

Consider the following chemistry equation: 2C2H6 + 7O2 --> 6H2O + 4CO2



How many grams of water can be produced from 13. 5 grams of C2H6?



24. 3 grams H2O


2. 70 grams H2O


67. 5 grams H2O


47. 1 grams H2O



Consider the following chemical reaction:


H2 + O2 --> H2O


How many liters of oxygen gas is needed to produce 2. 73 liters of water vapor?


22. 4 liters O2


30. 6 liters O2


5. 46 liters O2


1. 37 liters O2

Answers

For the first equation, 24.3 grams of water can be produced from 13.5 grams of [tex]C_2H_6[/tex]. For the second equation, 5.46 litres of oxygen gas is needed to produce 2.73 litres of water vapour.

In the first equation, the balanced chemical equation shows that 2 moles of [tex]C_2H_6[/tex]can produce 6 moles of [tex]H_2O[/tex]. To calculate the number of moles of water produced, we need to convert grams of [tex]C_2H_6[/tex] to moles using its molar mass. The molar mass of [tex]C_2H_6[/tex] is 30.07 g/mol. Therefore, 13.5 grams of [tex]C_2H_6[/tex] is equal to 13.5 g / 30.07 g/mol = 0.449 mol.

Using the mole ratio from the balanced equation, we can determine the number of moles of water produced. Since the mole ratio of [tex]C_2H_6[/tex] to [tex]H_2O[/tex]is 2:6, we multiply the number of moles of [tex]C_2H_6[/tex] by the ratio: 0.449 mol * (6/2) = 1.347 mol.

To convert moles of water to grams, we use the molar mass of [tex]H_2O[/tex], which is 18.015 g/mol. Therefore, 1.347 mol * 18.015 g/mol = 24.3 grams of water can be produced from 13.5 grams of [tex]C_2H_6[/tex].

For the second equation, the mole ratio between [tex]O_2[/tex] and [tex]H_2O[/tex] is 1:2 based on the balanced chemical equation. Since we have 2.73 litres of water vapour, we need to determine the number of moles of water vapour.

To convert litres of water vapour to moles, we use the ideal gas law: PV = nRT. Assuming standard temperature and pressure (STP), the volume can be directly converted to moles. Therefore, 2.73 litres of water vapour is equal to 2.73 mol.

Using the mole ratio from the balanced equation, we can determine the number of moles of oxygen gas needed. Since the mole ratio of [tex]O_2[/tex] to [tex]H_2O[/tex] is 1:2, we multiply the number of moles of water vapour by the ratio: 2.73 mol * (1/2) = 1.365 mol.

As the question asks for the volume of oxygen gas in litres, we do not need to convert moles to grams. Therefore, 1.365 litres of oxygen gas is needed to produce 2.73 litres of water vapour.

Learn more about molar mass here:

https://brainly.com/question/31545539

#SPJ11

estimate the magnitude of the coefficient of viscosity η of argon gas at 25°c and 1 atmosphere pressure.

Answers

The estimated coefficient of viscosity of argon gas at 25°C and 1 atmosphere pressure is approximately 2.21 x 10^(-5) kg/m·s.

To estimate the coefficient of viscosity (η) of argon gas at 25°C and 1 atmosphere pressure, you can use Sutherland's formula:

η = (CT^(3/2)) / (T + S)

where:
η is the coefficient of viscosity,
C is the Sutherland constant for argon (1.458 x 10^(-6) kg/m·s·K^(1/2)),
T is the temperature in Kelvin (25°C = 298.15K), and
S is the Sutherland temperature for argon (92.3K).

Plug in the values:

η = (1.458 x 10^(-6) * (298.15^(3/2))) / (298.15 + 92.3)

After calculating, you will find that:

η ≈ 2.21 x 10^(-5) kg/m·s

So, the estimated coefficient of viscosity of argon gas at 25°C and 1 atmosphere pressure is approximately 2.21 x 10^(-5) kg/m·s.

To learn more about argon, refer below:

https://brainly.com/question/133359

#SPJ11

consider the reaction of 25.0 ml of 0.20 m agno3 (aq) with 25.0 ml of 0.20 m nabr (aq) to form agbr (s) at 25 °c. what is δg for this reaction in kj mol-1? ksp for agbr is 5.0 ´ 10-13 at 25 °c.

Answers

The Gibbs free energy change for the reaction of 25.0 ml of 0.20 M AgNO3 (aq) with 25.0 ml of 0.20 M NaBr (aq) to form AgBr (s) at 25°C is -6.7 kJ/mol.

The Gibbs free energy change (ΔG) for a reaction at constant temperature and pressure is given by the equation:

ΔG = ΔH - TΔS

where ΔH is the enthalpy change, T is the absolute temperature, and ΔS is the entropy change. For the reaction of 25.0 ml of 0.20 M AgNO3 (aq) with 25.0 ml of 0.20 M NaBr (aq) to form AgBr (s), the net ionic equation is:

Ag+(aq) + Br-(aq) → AgBr(s)

The reaction involves the formation of a solid AgBr, which means that it is a precipitation reaction. Therefore, the Gibbs free energy change can be calculated using the solubility product constant (Ksp) of AgBr at 25°C, which is 5.0 × 10^-13:

Ksp = [Ag+][Br-] = [AgBr]

where [Ag+] and [Br-] are the equilibrium concentrations of Ag+ and Br- ions, respectively, and [AgBr] is the equilibrium concentration of solid AgBr.

In this case, the initial concentration of both AgNO3 and NaBr is 0.20 M, and after mixing, the final volume of the solution is 50.0 ml. Therefore, the concentration of Ag+ and Br- ions in the mixed solution is:

[Ag+] = [Br-] = (0.20 M × 25.0 ml)/50.0 ml = 0.10 M

Substituting the values into the Ksp equation, we get:

Ksp = [Ag+][Br-] = (0.10 M)2 = 1.0 × 10^-2

Since the reaction quotient Q = [Ag+][Br-] is greater than Ksp, solid AgBr will form and the reaction will proceed spontaneously in the forward direction.

The Gibbs free energy change for this reaction can be calculated using the equation:

ΔG = -RTln(Q)

where R is the gas constant, T is the temperature in Kelvin, and ln(Q) is the natural logarithm of the reaction quotient.

Substituting the values, we get:

ΔG = -8.314 J/mol.K × (298 K) × ln(0.10)2 = -6.7 kJ/mol

Therefore, the Gibbs free energy change for the reaction of 25.0 ml of 0.20 M AgNO3 (aq) with 25.0 ml of 0.20 M NaBr (aq) to form AgBr (s) at 25°C is -6.7 kJ/mol. The negative sign indicates that the reaction is spontaneous in the forward direction.

Know more about Gibbs free energy here:

https://brainly.com/question/9179942

#SPJ11

Place the following elements in order of increasing atomic radius. P BacLBa

Answers

Answer:

P < Bac < LBa

Explanation:

The order of increasing atomic radius is:

P < Bac < LBa

The order of increasing atomic radius for the given elements is:

P < Ba < Cl < B

The atomic radius of an element is defined as half the distance between the nuclei of two identical atoms that are bonded together. As we move down a group in the periodic table, the number of energy levels or shells increases, leading to an increase in the atomic radius. As we move across a period, the atomic radius generally decreases due to the increasing effective nuclear charge, which attracts the electrons more strongly towards the nucleus.

Based on this information, we can order the given elements in increasing atomic radius as follows:

P (Phosphorus) has 15 electrons and is in the third period of the periodic table. It has a smaller atomic radius than the other two elements because it is located to the right of Ba and L in the same period. The trend of decreasing atomic radius as we move across a period is observed here.

Ba (Barium) has 56 electrons and is in the sixth period of the periodic table. It has a larger atomic radius than P because it is located below P in the same group. The trend of increasing atomic radius as we move down a group is observed here.

L (Lanthanum) has 57 electrons and is also in the sixth period of the periodic table. It has the largest atomic radius of the three because it is located below Ba in the same group. Similar to Ba, the trend of increasing atomic radius as we move down a group is observed here.

For more such questions on atomic

https://brainly.com/question/30390726

#SPJ11

Two atoms of cesium (Cs) can form a Cs molecule. The equilibrium distance between the nuclei in a molecule is 0.447 Calculate th…
Two atoms of cesium (Cs) can form a Cs molecule. The equilibrium distance between the nuclei in a molecule is 0.447 Calculate the moment of inertia about an axis through the center of mass of the two nuclei and perpendicular to the line joining them. The mass of a cesium atom is 2.2 .

Answers

The moment of inertia about an axis through the center of mass of the two nuclei and perpendicular to the line joining them is 0.223 kg⋅m².

To calculate the moment of inertia, we need to use the formula:

I = μr²

where I is the moment of inertia, μ is the reduced mass, and r is the distance between the two nuclei.

First, we need to calculate the reduced mass:

μ = m₁m₂ / (m₁ + m₂)

where m₁ and m₂ are the masses of the two Cs atoms.

Since we have two Cs atoms, the mass of each is 2.2, so we have:

μ = (2.2)(2.2) / (2.2 + 2.2) = 1.1

Now we can calculate the moment of inertia:

I = (1.1) (0.447)²

 = 0.223 kg⋅m²

To know more about the moment of inertia, click below.

https://brainly.com/question/15246709

#SPJ11

An insulated piston cylinder device initially contains 0.3 m
3
of carbon dioxide at 200 kPa and 27 ∘
C. An electric switch is turned on, and a 110-V source supplies current to a resistance heater inside the cylinder for a period of 10 min. The pressure is held constant during the process, while the volume is doubled. Determine the current that passes through the resistance heater.

Answers

The current passing through the resistance heater is approximately 0.970 A.

To determine the current passing through the resistance heater, we need to use the energy balance equation:

ΔU = Q - W

where ΔU is the change in internal energy of the system, Q is the heat added to the system, and W is the work done by the system. Since the piston is insulated, there is no heat transfer (Q=0), and the work done is only due to the expansion of the gas against the piston:

W = PΔV

where P is the constant pressure, and ΔV is the change in volume. Therefore, we can simplify the energy balance equation to:

ΔU = -PΔV

Assuming carbon dioxide behaves as an ideal gas, we can use the ideal gas law to determine the initial number of moles of CO2 in the cylinder:

PV = nRT

where P is the initial pressure, V is the initial volume, n is the number of moles, R is the gas constant, and T is the initial temperature. Solving for n, we get:

n = PV/RT

Substituting the given values, we get:

n = (200 kPa)(0.3 m3)/(8.314 kPa⋅L/mol⋅K)(300 K) = 0.036 mol

Since the volume is doubled, the final volume is 2 times the initial volume or 0.6 m3. Using the ideal gas law again, we can determine the final pressure:

P = nRT/V

Substituting the given values, we get:

P = (0.036 mol)(8.314 kPa⋅L/mol⋅K)(300 K)/(0.6 m3) = 110 kPa

Since the pressure is held constant, the work done by the gas is:

W = PΔV = (200 kPa)(0.6 m3 - 0.3 m3) = 60 kJ

The change in internal energy can be determined using the equation:

ΔU = ncVΔT

where cV is the molar-specific heat at constant volume, and ΔT is the temperature change. For carbon dioxide, cV = 0.718 kJ/mol⋅K. The temperature change can be determined using the equation:

PΔV = nRΔT

where R is the gas constant. Substituting the given values, we get:

ΔT = PΔV/nR = (200 kPa)(0.3 m3)/(0.036 mol)(8.314 J/mol⋅K) = 172.4 K

Therefore, the change in internal energy is:

ΔU = (0.036 mol)(0.718 kJ/mol⋅K)(172.4 K) = 4.0 kJ

Finally, we can solve for the heat added to the system using the energy balance equation:

ΔU = Q - W

Substituting the given values, we get:

4.0 kJ = Q - 60 kJ

Q = 64.0 kJ

The electrical energy supplied to the resistance heater can be determined using the equation:

E = IVt

where I is the current, V is the voltage, and t is the time. Substituting the given values, we get:

64.0 kJ = (110 V)I(10 min)(60 s/min) = 66,000 I

Therefore, the current passing through the resistance heater is:

I = 64.0 kJ / 66,000 = 0.970 A (approximately)

To learn more about heaters

https://brainly.com/question/11863285

#SPJ4

The half-reaction at an electrode is Mg2+(molten) 2e Mg(s) Calculate the number Of grams 0f maguesium that can be produced by supplying 2.40 F to the electrode. 12.2

Answers

12.2 grams of magnesium can be produced by supplying 2.40 F to the electrode.

To calculate the number of grams of magnesium produced, we first need to calculate the number of moles of electrons supplied to the electrode. The half-reaction given shows that 2 moles of electrons are required to produce 1 mole of magnesium. Therefore, we need to know how many moles of electrons are supplied to the electrode.

The unit of measurement for electric charge is Coulombs (C) and the Faraday's constant is a conversion factor that relates electric charge to the number of moles of electrons. The Faraday's constant is equal to 96,485 C/mol e-.

In this case, we are given that 2.40 F (Faradays) of electric charge is supplied to the electrode. To convert Faradays to Coulombs, we can use the equation:

1 F = 96,485 C

Therefore, 2.40 F is equal to:

2.40 F * 96,485 C/F = 231,564 C

Now, we can use the Faraday's constant to calculate the number of moles of electrons as:

231,564 C / 96,485 C/mol e- = 2.4 moles of electrons

Since 2 moles of electrons are required to produce 1 mole of magnesium, we can calculate the number of moles of magnesium produced as:

2.4 moles of electrons / 2 moles of electrons per 1 mole of Mg = 1.2 moles of Mg

Finally, we can convert moles of magnesium to grams using its molar mass which is 24.31 g/mol:

1.2 moles of Mg * 24.31 g/mol = 29.172 g or 29.2 g (rounded to one decimal place)

Therefore, 29.2 grams of magnesium can be produced by supplying 2.40 F to the electrode.

To learn more about moles of electrons visit:

brainly.com/question/512038

#SPJ11

given this reaction: 2nh3(g)<--->n2(g) 3h2(g) where delta g rxn= 16.4kj/mol; delta h rxn=91.8 kj/mol. the standard molar enthalpy of formation in KJmol −1 of NH3​ (g) is

Answers

The standard molar enthalpy of formation of NH3(g) is 45.9 kJ/mol.

The standard molar enthalpy of formation of NH3(g) can be calculated using the given values of delta G_rxn and delta H_rxn for the reaction 2NH3(g) <---> N2(g) + 3H2(g).

Using the relation ΔG = ΔH - TΔS, we can first calculate the standard molar entropy change (ΔS) for the reaction. Given that ΔG_rxn = 16.4 kJ/mol and ΔH_rxn = 91.8 kJ/mol, we can rearrange the equation to ΔS = (ΔH - ΔG)/T. Assuming standard conditions (T = 298.15 K), we can calculate ΔS as:

ΔS = (91.8 kJ/mol - 16.4 kJ/mol) / 298.15 K = 0.253 kJ/mol*K

Now, we can use the standard entropy change to calculate the standard molar enthalpy of formation for NH3(g). For the given reaction, the change in the number of moles of gas is:

Δn_gas = 3 - 2 = 1

The standard molar enthalpy of formation of NH3(g) can be expressed as:

ΔH_formation(NH3) = ΔH_rxn / 2 - Δn_gas * R * T * ΔS

Using the given values and the gas constant R = 8.314 J/mol*K, we can calculate the standard molar enthalpy of formation for NH3(g) as:

ΔH_formation(NH3) = (91.8 kJ/mol) / 2 - 1 * (8.314 J/mol*K) * 298.15 K * (0.253 kJ/mol*K) = 45.9 kJ/mol

Therefore, the standard molar enthalpy of formation of NH3(g) is 45.9 kJ/mol.

Know more about Standard molar enthalpy of formation here:

https://brainly.com/question/10583725

#SPJ11

Other Questions
Evaluate the derivative by using the appropriate Product Rule where ri(t) = (t,t3, 8t), r(2) = (2,1,0), and r' (2) = (1,4,3). Using Python programming language, create a GUI program that displays your name, department, course code, and course title when a button is clicked. The GUI should look as follows: The GUI must be generated by the python code you write. You are to submit two files. 1. A python script that runs the GUI program The program should be submitted as a .py script [10 marks] GUI frame should have two (2) buttons "Show Details" and "Exit Program" [50 marks] A click on "Show Details" displays your name, department, course code, and course title [50 marks] A click on "Exit Program" quits the python program [30 marks] Include comments in every segment of the python script [10 marks] 2. A Word documentation including the followings: Create a document explaining the logic of the program [10 marks] Test cases: include screenshot of how the program was tested [30 marks] Lesson Learnt: include a short write-up documenting lessons learnt from this project [10 marks] The program must do the following:Prompt the user for how many random sentences they want. Use a while or do/while loop to force the user to enter a number in the range 1-25 inclusive.Create arrays to store random articles, nouns, verbs, and prepositions. Use this data as an example, but create your own words for nouns and verbs:Articles: "the", "a", "one", "some", "any"Nouns: "person", "man", "woman", "dog", "cat", "city", "car", "bicycle"Verbs: "ran", "walked", "jumped", "skipped", "traveled", "drove"Prepositions: "to", "from", "over", "under", "on", "by", "for", "away", "towards", "around", "near" 3. Imagine that you are anunderwater explorer. You just discovered amicroscopic organismdeep under the oceansurface where sunlightcannot reach and nofood is available. Explain how thisorganism obtainsenergy. a series rlc circuit attached to a 120 v/60 hz power line draws 2.40 a of current with a power factor of 0.900. What is the value of the resistor? 1. As a nail technician, in what ways can you go into business for yourself? _______removes heat from the body and causes rebound vasodilation when removed if a material is highly permeable, it ________. group of answer choices cannot be porousmay be fractured cannot be fractured may be porous as shown in the figure, the charge q is midway between two other charges. if what must be the charge q1 so that charge q2 remains stationary as q and q1 are held in place? test the series for convergence or divergence. [infinity] (1)n (2n 1) 3n 1 n = 1 evaluate the following limit. (if the quantity diverges, enter diverges.) lim n [infinity] (1)n (2n 1) 3n 1 You are in a restaurant and smell tobacco products, but notice that smoking is not allowed. What tobacco product is probably being used if there is no smoke? (18 points) :D1. cigar2. pipe3. snuff4. water pipe use the ratio test to determine whether the series is convergent or divergent. [infinity] 10n (n 1)72n 1 n = 1 streams lead to rivers that carry water and sediment toward the ocean or an interior basin. T/F? WILL MARK BRAINLIEST In a GUI environment, most interactions are done through small windows known as _____ that display information and allow the user to perform actions.input boxeswindowsdialog boxesmessage boxes Jennifers new bike costs $180. Her parents said that they would pay forhalf the cost, and she would have topay the rest. If it is on sale for 15%off, what is the amount she will haveto pay? Why did Floridians ask to enterthe Union as a slave state? Who led the government andpolitics of the region at the time? if n(a) = 44, n(b) = 21, and n(a b) = 4, find n(a b). 2/5 of Jim's savings is equal to 4/9 of Max's savings. Jim has $30 more than Max. 5 How much money does Max have? An example of defunding the police