Answer:
1. t = 5.89 s
2. h = 170 m
3. Vf = 57.8 m/s
Explanation:
1.
First, we analyze the horizontal motion of the golf ball. Assuming the air friction to be negligible, the horizontal motion will be uniform. So, e can use the following equation:
[tex]s = vt[/tex]
where,
s = horizontal distance covered by the golf ball = 471 m
v = horizontal speed of golf ball = 80 m/s
t = time taken by the golf ball in air = ?
Therefore,
[tex]471\ m = (80\ m/s)t\\\\t = \frac{471\ m}{80\ m/s}\\\\[/tex]
t = 5.89 s
2.
Now, we analyze the vertical motion. Using 2nd equation of motion:
[tex]h = v_{i}t + \frac{1}{2}gt^2[/tex]
where,
h = height of cliff = ?
vi = vertical component of initial speed of ball = 0 m/s(ball was shot horizontally)
g = acceleration due to gravity = 9.81 m/s²
t = time of flight = 5.89 s
Therefore,
[tex]h = (0\ m/s)(5.89\ s) + \frac{1}{2}(9.81\ m/s^2)(5.89\ s)^2[/tex]
h = 170 m
3.
Now, we can use 1st equation of motion:
[tex]v_{f} = v_{i} + gt\\v_{f} = 0 m/s + (9.81\ m/s^2)(5.89\ s)\\[/tex]
Vf = 57.8 m/s
a rock falls for 4 seconds. How far did it fall
Answer:
d = 80 m
Explanation:
It is given that,
A rock falls for 4 seconds.
We need to find how far did it fall.
let it cover d distance.
Using equation of motion to find it :
[tex]d=ut+\dfrac{1}{2}at^2[/tex]
Here, u = 0 (at rest initially)
a = g
[tex]d=\dfrac{1}{2}gt^2\\\\d=\dfrac{1}{2}\times 10\times 4^2\\\\d=80\ m[/tex]
It will fall at a distance of 80 m.
Roughly speaking, the radius of an atom is about 10,000 times greater than that of its nucleus. If an atom were magnified so that the radius of its nucleus became 2.0 cm, about the size of a marble, what would be the radius of the atom in miles
Answer:
0.124 miles
Explanation:
Since the radius of the atom R = 10000r where r = radius of nucleus. Now, if r = 2.0 cm = 0.02 m,
R = 10000r
= 10000 × 0.02 m
= 200 m
We know that 1 mile = 1609 m.
So the radius of the atom in miles is R = 200 m × 1 mile/ 1609 m = 0.124 miles
So, the radius of the atom in miles is 0.124 miles
A 40-kg person is climbing 3 m up a flight of stairs in 6 seconds. How much work did they do climbing the stairs? (acceleration due to gravity = 10 m/sec2)
Answer:
1200J
Explanation:
W.D=mass×accelerarion due to gravity×distance
W.D=40kg×10m/s²×3m
W.D=1200kgm²/s²
W.D=1200J
A 40 kg person is climbing 3 m up a flight of stairs in 6 seconds, then the work done by the person to climb the stairs is 1200 J.
What is Work done?When we apply a force called "F" to a block, the body moves with an acceleration or, additionally, its speed changes depending on the force's direction. The system's kinetic energy changes depending on whether the speed increases or decreases.
Energy must be transformed into another form because, as far as we are aware, it cannot be created or destroyed. In this view, it is referred to as work completed.
[tex]Work\ done = Force*Distance[/tex]
and Force = mg
Substitute all the values in the above formula,
W.D = 40 kg × 10 m/s² × 3 m
W.D = 1200 kg m²/s² or,
W.D = 1200 J
To get more information about Work done :
https://brainly.com/question/28172139
#SPJ2
1. Answer the question below. Use the rubric in the materials for help if needed.
Devon drove 50 miles west and then drove 15 miles north. Determine Devon's displacement. Show your work.
I need help
Answer:
d = 52.20 miles
Explanation:
Given that,
Devon drove 50 miles west and then drove 15 miles north.
We need to find Devon's displacement. Let it is d. It can be calculated as follows :
[tex]d=\sqrt{50^2+15^2} \\\\=52.20\ \text{miles}[/tex]
Hence, Devon's displacement is 52.20 miles.
An object in space has altitude of 2210 km, velocity of 7000 m/s and flight path angle of 20 degrees. Find the eccentricity, semi-major axis, angular momentum/mass, and kinetic and potential energies/mass
Answer:
Eccentricity = 0.0557
Semi-major axis = 9,095 km
Angular momentum/mass = 60,116 [tex]\frac{km^{2} }{Sec}[/tex]
Kinetic energies/mass = 24,500 KJ
Potential energies/mass = 21,673 KJ
Explanation:
Eccentricity
To find the eccentricity use the following formula
Eccentricity = [ Altitude from the earth x ( [tex]Velocity^{2}[/tex] / Gravitational parameter for the Earth ) ] - 1
Where
Altitude from the earth radius = Radius of the earth + Altitude of the earth from radius = 6,378 km + 2,210 km = 8,588 km
Velocity = 7,000 m/s
Gravitational parameter for the Earth = 3.986004418 × [tex]10^{14}[/tex]
Eccentricity = ?
Placing values in the formula
Eccentricity = [ ( 8,588 km x 1000 ) x ( [tex]7000^{2}[/tex] / 3.986004418 × [tex]10^{14}[/tex] ) ] - 1
Eccentricity = 0.0557
Semi-major axis
Total Distance = Semi-major axis x ( 1 - Eccentricity )
Where
Total Distance = 8,588 km
Eccentricity = 0.0557
8,588 x 1,000 m = Semi-major axis x ( 1 - 0.0557 )
8,588,000 m = Semi-major axis x 0.9443
Semi-major axis = 8,588,000 m / 0.9443
Semi-major axis = 9,094,567.40 m
Semi-major axis = 9,094.56740 km
Semi-major axis = 9,095 km
Angular momentum/mass
L = MVR
L/M = VR
Where
V = Velocity = [tex]\frac{7,000 m/s}{1000}[/tex] = 7 km/s
R = Total Radius = Radius of Earth + Altitude = 6,378 km + 2,210 km = 8,588 km
Placing values in the formula
L/M = 7 km/s x 8,588 km = 60,116 [tex]\frac{km^{2} }{Sec}[/tex]
Kinetic energies/mass
Ke = I [tex]W^{2}[/tex]
Ke = [tex]\frac{1}{2} mr^{2}[/tex] [tex]W^{2}[/tex] ( Where I = [tex]mr^{2}[/tex] )
[tex]\frac{ke}{m}[/tex] = [tex]\frac{r^2}{2}[/tex] [tex]W^{2}[/tex]
[tex]\frac{ke}{m}[/tex] = [tex]\frac{r^2}{2}[/tex] [tex]\frac{V^2}{r^2}[/tex] ( [tex]W^{2}[/tex] = [tex]\frac{V^2}{r^2}[/tex] )
[tex]\frac{ke}{m}[/tex] = [tex]\frac{V^2}{2}[/tex]
[tex]\frac{ke}{m}[/tex] = [tex]\frac{7000^2}{2}[/tex]
[tex]\frac{ke}{m}[/tex] = 24,500,000 J
[tex]\frac{ke}{m}[/tex] = 24,500 KJ
Potential energies/mass
PE = mgh
[tex]\frac{PE}{m}[/tex] = gh
Where
g = 9.807 [tex]\frac{m}{s^2}[/tex]
h = 2,210 km x 1,000 = 2,210,000 m
Placing values in the formula
[tex]\frac{PE}{m}[/tex] = 9.807 [tex]\frac{m}{s^2}[/tex] x 2,210,000 m
[tex]\frac{PE}{m}[/tex] = 21,673,470 J
[tex]\frac{PE}{m}[/tex] = 21,673.470 KJ
[tex]\frac{PE}{m}[/tex] = 21,673 KJ
Which has a stronger force binding the nucleus together Hydrogen and Helium
Answer:
Explanation:
Nucleus
The maker of an automobile advertises that it takes 13 seconds to accelerate from 5 kilometers per hour to 65 kilometers per hour. Assuming constant acceleration, compute the acceleration in meters per second per second. Round your answer to three decimal places.
Answer: the acceleration is 1.282 m/s²
Explanation:
Given that;
Time t = 13 sec
Initial velocity U = 5 kmph = (5 × 1000)/(60 × 60) = 1.3888 m/s
final velocity V = 65 kmph = (65 × 1000)/(60 × 60) = 18.0555 m/s
Now we know that;
V = U + at
we substitute
18.0555 = 1.3888 + 13a
18.0555 - 1.3888 = 13a
13a = 16.6667
a = 16.6667 / 13
a = 1.282 m/s²
Therefore the acceleration is 1.282 m/s²
On a part-time job, you are asked to bring a cylindrical iron rod of density 7800 kg/m^3 , length 92.4 cm and diameter 2.15 cm from a storage room to a machinist. Calculate the weight of the rod, w. Assume the free-fall acceleration is g =9.81m/s^2
Answer:
25.68 N
Explanation:
From the question given above, the following data were obtained:
Density of cylindrical rod = 7800 kg/m³
Length = 92.4 cm
Diameter = 2.15 cm
Acceleration due to gravity (g) = 9.8 m/s²
Weight of rod =?
Next, we shall determine the volume of the rod. This can be obtained as follow:
Height (h) = 92.4 cm
Diameter (d) = 2.15 cm
Pi (π) = 3.14
Volume (V) =?
V = π(d/2)²h
V = 3.14 × (2.15/2)² × 92.4
V = 335.29 cm³
Next, we shall convert 335.29 cm³ to m³. This can be obtained as follow:
1 cm³ = 1×10¯⁶ m³
Therefore,
335.29 cm³ = 335.29 cm³ × 1×10¯⁶ m³ / 1 cm³
335.29 cm³ = 0.00033529 m³
Thus, 335.29 cm³ is equivalent to 0.00033529 m³.
Next, we shall determine the mass of the rod. This can be obtained as follow:
Density of rod = 7800 kg/m³
Volume of rod = 0.00033529 m³.
Mass of rod =?
Density = mass /volume
7800 = mass / 0.00033529
Cross multiply
Mass of rod = 7800 × 0.00033529
Mass of rod = 2.62 Kg
Finally, we shall determine the weight of the rod. This can be obtained as follow:
Mass (m) of rod = 2.62 Kg
Acceleration due to gravity (g) = 9.8 m/s²
Weight (W) of rod =?
W = m × g
W = 2.62 × 9.8
W = 25.68 N
Therefore, the weight of the rod is 25.68 N
What type of simple machine is an electric fan?
Answer:
An electric fan is considered to be a mixture of several simple machines. It includes the Wheel and Axle type, wedges, and the Inclined plane types. The blades of an electric fan are the inclined planes and the wedges.
How has the magnet affected the block of material next to it?
A. The domains in the end of the block farthest from the magnet are aligned with its magnetic field.
B. The domains in the end of the block closest to the magnet are aligned with its magnetic field.
C. The domains in the center of the block are aligned with the magnetis magnetic field
D. The domains in the entire block are aligned with the magnets magnetic field
Answer: (APE X) B
Explanation: I am taking it and I just got it right
The magnetic characteristics of a substance are determined by the magnetic moments of its atoms, the domains which are closest to the magnet are aligned with its magnetic field, hence option b is correct.
What is the effect of a magnet?Long-range alignments of magnetic moments in ferromagnetic materials, known as domains, include magnetic moments that all point in the same direction.
This indicates that the atoms' individual magnetic moments are lined up with one another and pointing in the same general direction.
Therefore, a magnetic substance will get magnetized if it is placed close to a magnet. Magnetism is the name for this kind of electricity, hence option b is correct.
Learn more about the magnet, here:
https://brainly.com/question/10666129
#SPJ2
What is albedo? What on Earth has high albedo?
Answer:
The fraction of incident light or radiation reflected by a surface or body, commonly expressed as a percentage.
2.
biology The whitish inner portion of the rind of citrus fruits that is a source of pectin, commonly referred to as the pith.
Explanation:
If The density of this stainless steel is7.85 g/cm3,specific heatis 0.5 J/g.K, melting pointis 1673K, heat of fusion s0.260J/kg. How much energy is required to re-melt this tube completely from room temperature
Answer:
[tex]\Delta H=687.4 J[/tex]
Explanation:
Hello!
In this case, for this melting process, we can identify two sub-processes in order to take the stainless steel from solid to liquid:
1. Heat up from 298.15 K to 1673 K.
2. Undergo the phase transition.
Both process have an associated enthalpy as shown below:
[tex]\Delta H_1=1g*0.5\frac{J}{g*K} (1673K-298.15K)=687.4J[/tex]
[tex]\Delta H_2=0.001kg*\frac{0.260J}{kg} =0.00026J[/tex]
Therefore, the required heat is:
[tex]\Delta H=\Delta H_1+\Delta H_2\\\\\Delta H=687.4J+0.00026J\\\\\Delta H=687.4J[/tex]
Notice the problem is not providing neither the mass or volume, that is why we assumed the mass is 1 g; however, it can be changed to the mass you are given.
Best regards!
A mixture contains salt, sand, pebbles, and grass. Which part of this mixture is soluble in water?
Grass
Pebbles
Salt
Sand
Answer:
hey!
the answer is
salt
Explanation:
this is due to sand, grass and pebbles are not soluble (they do not dissolve in water)
pls put brainliest
An apple (mass = 0.25 kg) on a string 1 m in length is whirled above a student's head in a circle. The apple has a tangential speed of 12 m/s. What is the magnitude of the centripetal force on the apple?
Answer:
36N
Explanation:
Given parameters:
Mass of apple = 0.25kg
length of string = 1m
tangential speed = 12m/s
Unknown:
magnitude of centripetal force = ?
Solution:
The centripetal force keeps a body moving along a circular path.
It is mathematically derived using the expression below;
F = [tex]\frac{mv^{2} }{r}[/tex]
F is the centripetal force
m is the mass
v is the tangential speed
r is the radius
Now insert the parameters and solve;
F = [tex]\frac{0.25 x 12^{2} }{1}[/tex] = 36N
The distance between the object and its image formed by a plane mirror appears to be 24 cm. What is the distance between the mirror and the object?
Answer:
in a plane mirror distance of object from mirror is equal to distance of image
so it will be 24 ÷ 2 = 12 cm
1) A rock is thrown downward from the top of a 40.0-m-tall tower with an initial speed of 12 m/s. Assuming
negligible air resistance, what is the speed of the rock just before hitting the ground?
Answer:
By using [tex]v^{2}_{f} = v^{2}_{i} + 2a\Delta y[/tex], with [tex]v_{i} = -12m/s[/tex] and [tex]\Delta y = -40m[/tex]:
[tex]v^{2}_{f} = v^{2}_{i} + 2a/Delta y[/tex]
[tex]v^{2} = (-12m/s)^{2} + 2(-9.80m/s^{2})(-40m)[/tex]
[tex]v = -30m/s[/tex]
Explanation:
Hope this helped!
A rock is thrown downward from the top of a 40 m tall tower, with The speed of the rock just before hitting the ground will be equal to -30 m/s.
What is Friction?Friction is the resistance to a thing moving or rolling over another solid object. Although frictional forces can be advantageous, such as the traction required to walk while slipping, they also provide a significant amount of resistance to motion. In order to overcome frictional resistance in the moving parts, about 20% of an automobile's engine power is used.
The forces of attraction, also referred to as adhesion, between the contact zones of the surface, which are always minutely uneven, seem to be the main contributor to friction between metals.
From the given information in the question,
v²(f) = v²(i) + 2aΔy
v² = (-12 m/s)² + 2(-9.8)(-40)
v = -30 m/s.
Therefore, the velocity of the rock is -30 m/s.
To know more about Friction:
https://brainly.com/question/13000653
#SPJ2
A 15 N force is applied to a 12 kg box for 6 s. The box is initially at rest. What is the speed of the box at the end of the 6 s interval
Answer:
The speed of the box at the end of the 6 s interval is 7.5 m/s.
Explanation:
Given;
magnitude of the force, f = 15 N
mass of the box, m = 12 kg
initial velocity of the box, u = 0
time of the box motion, t = 6s
The applied force on the box is given by Newton's second law of motion;
f = ma
where;
a is the acceleration of the box
a = f / m
a = (15) / (12)
a = 1.25 m/s²
The final velocity of the box is calculated as;
v = u + at
v = 0 + (1.25 x 6)
v = 7.5 m/s.
Therefore, the speed of the box at the end of the 6 s interval is 7.5 m/s.
8
9
TIME REMAINING 10:34
Which statement describes an atomic nucleſus?
An atomic nucleus is negatively charged.
An atomic nucleus has no electrical charge.
An atomic nucleus consists of mostly empty space.
An atomic nucleus contains most of the atom's mass,
An atomic nucleus . . .
-- contains all of the atom's positive charge
-- contains almost all of the atom's mass
-- contains none of the atom's negative charge.
Answer:
An atomic nucleus . . .
-- contains all of the atom's positive charge
-- contains almost all of the atom's mass
-- contains none of the atom's negative charge.
Explanation:
yaaaaaa what the person on top said
I AM 145 LBS. I FELL FROM A TABLE TOP THAT WAS 4.5 FEET HIGH AND LANDED ON MY HAND WHICH WAS TURNED BACKWORDS. I BROKE BOTH MAJOR BONES IN MY ARM DIRECTLY ABOVE MY WRIST. WHAT IS THE FORMULA OF THE FORCE AND WEIGHT HITTING THE FLOOR
a ray of light parallel to the principal axis of spherical mirror
Answer:
This question is incomplete but the completed question is below
A ray of light parallel to the principal axis of a spherical mirror passes through its _____ after reflection.
(a) focus (b) pole (c) centre of curvature (d) imaginary centre of curvature
The correct option is (a)
Explanation:
After reflection, a ray of light will usually appear to diverge after they hit a spherical mirror, extending behind the mirror to meet at a point (called the focus or focal point) between the pole and the centre of curvature of this mirror. Hence, option a is the correct option.
please write the definition of instantaneous speed, velocity and acceleration and solve problems on them please show workings
Answer:
instantaneous speed: The instantaneous speed is the speed of an object at a particular moment in time. And if you include the direction with that speed, you get the instantaneous velocity. In other words, eight meters per second to the right was the instantaneously velocity of this person at that particular moment in time.
velocity: the speed of something in a given direction.
acceleration: a vehicle's capacity to gain speed within a short time.
solve problems: Problem solving consists of using generic or ad hoc methods in an orderly manner to find solutions to problems.
Explanation:
what is the shallowest part of the ocean ecosystem is called
Answer:
intertidal zone.
the shallowest part of the ocean ecosystem, where the ocean floor os covered and uncovered as the tide goes in and out. Plankton. the organisms that float on the water in aquatic ecosystems and are unable to swim.
On what does kinetic energy depend?
a. Mass and velocity b. Gravity and mass c. Gravity and height d.
Velocity and gravity
Answer:
b
Explanation:
Answer:
Gravity and Mass
Explanation:
Kinetic energy is the energy of something moving. To get a lot of kinetic energy, there has to be a situation where the gravity is moving in the way the object is moving. The heavier the object, the faster it'll move.
Click to review the online content. Then answer the question(s) below, using complete sentences. Scroll down to view aditional
questions
Cause and Effect Graphic Organizers
Describe how T-charts and Star Charts can be used to organize information into cause and effect relationships.
I
Answer:
A T-chart is used comparing two sides of a topic for example pros and cons or cause and effect. A star diagram is used for organizing the characteristics of a single topic, a central space is used for displaying the topic, with each point showing or listing an attribute about the topic.
A jet aircraft is traveling at 219 m/s in horizontal flight. The engine takes in air at a rate of 77.9 kg/s and burns fuel at a rate of 4.19 kg/s. The exhaust gases are ejected at 934 m/s relative to the aircraft. Find the thrust of the jet engine. Answer in units of N. 019 (part 2 of 2) 10.0 points Find the delivered power. Answer in units of W
Answer: thrust [tex]-85905.24N[/tex]
delivered power [tex]= -18813247.56W[/tex]
Explanation:
given data:
horizontal speed = 219 m/s
rate of air intake = 77.9 kg/s
fuel combustion rate = 4.19 kg/s.
exhaust gases ejected = 934 m/s
solutuon:
Thrust of the engine
[tex]Fth = Ve * ( Mf - Ma ) - Vj *Ma[/tex]
[tex]= 934 * ( 4.19 - 77.9 ) - 219 *77.9[/tex]
[tex]= -68845.14 - 17060.1[/tex]
=[tex]-85905.24N[/tex]
delivered power
[tex]= Fth * Vj[/tex]
[tex]= -85905.24N * 219[/tex]
[tex]= -18813247.56W[/tex]
Given:
Horizontal speed = 219 m/sRate of air = 44.9 kg/sFuel combustion rate = 4.19 kg/sExhaust gas ejected = 934 m/sThrust of the engine will be:
→ [tex]F^{th} = Ve(Mf-Ms)-Vj\times Ma[/tex]
By putting the values, we get
[tex]= 934(4.19-77.9)-219\times 77.9[/tex]
[tex]= -68845.14-17060.1[/tex]
[tex]= -85905.24 \ N[/tex]
hence,
The delivered power will be:
= [tex]F^{th}\times Vj[/tex]
= [tex]-85905.24\times 219[/tex]
= [tex]-18813247.56 \ W[/tex]
Thus the solution above is right.
Learn more about power here:
https://brainly.com/question/20695102
Draw the Free- Body diagram of the 37 kilogram glass falling to the floor in a vacuum.
Then, use Newton’s Second Law to calculate how much force the glass hits the floor with.
Answer:
362.6 N
Explanation:
[tex]F_{g}=mg[/tex]
[tex]F_{g}=37\cdot9.8[/tex]
[tex]F_{g}=362.6\ N[/tex]
Therefore, the force that the glass hits the floor with is 362.6 N
Which electromagnetic waves have the shortest wavelength and the highest frequency?
i tried gamma and it said it was inncorect plz help
it is difficult to smooth floor why
Complete question is:
It's is difficult to walk on a wet floor than a smooth floor. Why?
Answer:
Because friction on wet floor is far lesser than on a smooth floor
Explanation:
On wet surfaces, the friction is far lesser than on smooth surfaces and thus the grip between the bottom of your shoes/feet and the ground is very very small and as such walking on the wet surface becomes more difficult. Whereas on Smooth surfaces, there is plenty of friction and as a result, there is enough grip between the bottom of your shoes/feet and the ground thereby making walking far easier.
A microscope using ultraviolet light is used to study bacteria. If the aperture diameter is 1.5 cm and it is desired to distinguish features with an angular size 0.036 arc seconds, what maximum wavelength can be used
Given :
A microscope using ultraviolet light is used to study bacteria. If the aperture diameter is 1.5 cm.
Angular size is 0.036 arc seconds.
To Find :
The maximum wavelength that can be used.
Solution :
Converting given angle into radians :
[tex]\theta = \dfrac{0.036}{3600}\times \dfrac{\pi}{180}\\\\\theta = 1.745\times 10^{-7}\ radians[/tex]
Now, we know maximum wavelength is given by :
[tex]\lambda = \dfrac{\theta \times D}{1.22}\\\\\lambda = \dfrac{1.745\times 10^{-7} \times 0.015}{1.22}\ m\\\\\lambda =2.145 \times 10^{-7}\ m[/tex]
Hence, this is the required solution.
pls tell the answer
Just flip one of the batteries to connect one's positive terminal to others negative terminal.