A hockey goalie is standing on ice. Another player fires a puck (m = 0.14 kg) at the goalie with a velocity of +69 m/s.
a) If the goalie catches the puck with his glove in a time of 4.0
×
10
−
3
s, what is the average force (magnitude and direction) exerted on the goalie by the puck?
b) Instead of catching the puck, the goalie slaps it with his stick and returns the puck straight back to the player with a velocity of -69 m/s. The puck and stick are in contact for a time of 4.0
×
10
−
3
s. Now, what is the average force exerted on the goalie by the puck?

The electrostatic force of repulsion between two protons separated by 75 pm is 2.31 x 10⁻¹¹ N.

The electrostatic force of repulsion between two protons can be calculated using Coulomb's law:

F = (kq1q2) / r²

where F is the electrostatic force, k is Coulomb's constant (8.99 x 10⁹ Nm²/C²), q1 and q2 are the charges of the two protons (1.60 x 10⁻¹⁹ C), and r is the distance between the protons (75 pm = 7.5 x 10⁻¹¹ m).

Plugging in these values, we get:

F = (8.99 x 10⁹ Nm²/C²) * (1.60 x 10⁻¹⁹ C)² / (7.5 x 10⁻¹¹ m)²

F = 2.31 x 10⁻¹¹ N

Therefore, the electrostatic force of repulsion between two protons separated by 75 pm is 2.31 x 10⁻¹¹ N.

Learn more about electrostatic force

brainly.com/question/9774180

#SPJ11

the current (I) through an 80 W toaster when it operating voltage on 220V is 0.36 A.

Power is the rate of doing work. Power is also defined as work divided by time. i.e. Power = Work ÷ Time. Its SI unit is Watt denoted by letter W. Watt(W) means J/s or J.s-1. Something makes work in less time, it means it has more power. Work is Force times Displacement. Dimension of Power is [M¹ L² T⁻³]. The Electric Power  is current times voltage.

P = VI

Putting all the values,

80W = 220×I

I = 80/220

I = 0.36 A

To know more about Current :

https://brainly.com/question/13076734

#SPJ2.

To determine the tension required to achieve a specific number of vibrations per second for a transverse wave, we can use the formula for wave speed:

v = λ * f

where:

v is the wave speed,

λ is the wavelength, and

f is the frequency.

In this case, we are given the wavelength (λ) as 3.23 cm and the frequency (f) as 625 vibrations per second.

First, let's convert the wavelength to meters:

λ = 3.23 cm = 3.23 * 10^(-2) m

Next, we can rearrange the formula to solve for the wave speed (v):

v = λ * f

Substituting the given values:

v = (3.23 * 10^(-2) m) * (625 s^(-1))

v = 2.01875 m/s

The wave speed is related to the tension (T) in the medium by the following equation for transverse waves:

v = sqrt(T/μ)

where:

v is the wave speed,

T is the tension in newtons, and

μ is the linear mass density of the medium.

To solve for T, we need to know the linear mass density of the medium, which is not provided in the question. Without this information, we cannot calculate the exact tension required to achieve the given frequency and wavelength.

To know more about wavelength refer here

https://brainly.com/question/31143857#

#SPJ11

For an electron ejected from potassium by light with a wavelength of 210 nm, the maximal photoelectron ejection speed is approximately 5.31 x 10⁵ m/s.

The maximum photoelectron ejection speed can be calculated using the equation:

E = hf - φ

where E is the maximum kinetic energy of the photoelectron, h is Planck's constant, f is the frequency of the incident light, and φ is the work function of the metal.

The frequency of the incident light can be calculated from its wavelength using the equation:

c = λf

where c is the speed of light in vacuum, λ is the wavelength of the light, and f is the frequency of the light.

Substituting the given values, we get:

f = c / λ = (3.00 x 10⁸ m/s) / (210 x 10⁻⁹ m) = 1.43 x 10¹⁵ Hz

The work function of potassium is approximately 2.3 eV or 3.68 x 10⁻¹⁹ J.

Substituting the values into the equation for the maximum kinetic energy, we get:

E = hf - φ = (6.63 x 10⁻³⁴ J s) x (1.43 x 10¹⁵ Hz) - 3.68 x 10⁻¹⁹ J

E = 9.25 x 10⁻¹⁹ J

The maximum kinetic energy of the photoelectron is equal to the kinetic energy of a particle with a mass of 9.11 x 10⁻³¹ kg traveling at a velocity v. We can use the equation for kinetic energy to find the velocity v:

E = (1/2)mv²

Solving for v, we get:

v = √(2E / m) = √(2 x 9.25 x 10⁻¹⁹ J / 9.11 x 10⁻³¹ kg) = 5.31 x 10⁵ m/s

Therefore, the maximum photoelectron ejection speed for an electron ejected from potassium by light with a wavelength of 210 nm is approximately 5.31 x 10⁵ m/s.

Learn more about photoelectron on:

https://brainly.com/question/14558106

#SPJ11

The trichromatic theory of color vision states that color perception is due to the presence of three types of photoreceptor cells in the retina: red, green, and blue.

These cells are sensitive to different wavelengths of light and combine their signals to create our perception of a wide range of colors. In more detail, the theory suggests that our eyes have three types of cone cells that are each most sensitive to a specific range of wavelengths: long (red), medium (green), and short (blue). When light enters the eye, it stimulates these cone cells to varying degrees, depending on the wavelength composition of the light. The brain then interprets the signals from these cone cells to create our perception of different colors. This theory explains why mixing certain wavelengths of light can create the perception of various colors.

learn more about trichromatic here:

https://brainly.com/question/31546073

#SPJ11

The work done by the system is 148.2J

The quantity of energy transferred by the force to move an object is termed as work done. It is a scalar quantity and measured in Joules.

The work done on a spiral spring is expressed as;

W = 1/2ke² or 1/2fe

where k is the force constant and e is the displacement.

K = 12N/m

e = 24.7 meters

W = 1/2 × 12 × 24.7

W = 296.4/2

W = 148.2 J

therefore the work done by the system is 148.2 J

learn more about work done from

https://brainly.com/question/8119756

#SPJ4

The mass of the heavier object is 199.779 kg, while the lighter object is 0.221 kg. These values are obtained by solving a system of equations based on the combined mass and gravitational attraction between them. The gravitational force equation is used to relate the masses to the observed gravitational attraction.

Let's denote the mass of the heavier object as M and the mass of the lighter object as m. We are given that the combined mass of the two objects is 200 kg, so we have the equation:

M + m = 200 kg ---(1)

We are also given that the gravitational attraction between the objects is 8.37 × 10^(-6) N when their centers are 21.0 cm (or 0.21 m) apart. The gravitational force between two objects is given by the equation:

F = G * (M * m) / r^2

where F is the gravitational force, G is the gravitational constant (approximately 6.674 × 10^(-11) N m^2/kg^2), M and m are the masses of the objects, and r is the separation between their centers.

Plugging in the given values, we have:

8.37 × 10^(-6) N = (6.674 × 10^(-11) N m^2/kg^2) * (M * m) / (0.21 m)^2

Simplifying the equation:

8.37 × 10^(-6) N = (6.674 × 10^(-11) N m^2/kg^2) * (M * m) / 0.0441 m^2

8.37 × 10^(-6) N * 0.0441 m^2 = 6.674 × 10^(-11) N m^2/kg^2 * (M * m)

0.000368457 N m^2 = 6.674 × 10^(-11) N m^2/kg^2 * (M * m)

Dividing both sides of the equation by (6.674 × 10^(-11) N m^2/kg^2), we get:

0.000368457 N m^2 / (6.674 × 10^(-11) N m^2/kg^2) = M * m

55.221 kg = M * m ---(2)

We now have a system of two equations (equations 1 and 2) that we can solve simultaneously to find the values of M and m.

From equation 1:

M + m = 200 kg

m = 200 kg - M

Substituting this into equation 2:

55.221 kg = M * (200 kg - M)

Expanding the equation:

55.221 kg = 200M kg - M^2

Rearranging the equation:

M^2 - 200M + 55.221 kg = 0

This is a quadratic equation in terms of M. We can solve it using the quadratic formula:

M = (-b ± sqrt(b^2 - 4ac)) / 2a

Where a = 1, b = -200, and c = 55.221.

Solving the quadratic equation, we find two possible values for M:

M ≈ 0.221 kg (rounded to three decimal places) or M ≈ 199.779 kg (rounded to three decimal places).

Since M represents the mass of the heavier object, the mass of the heavier object is approximately 199.779 kg, and the mass of the lighter object is approximately 0.221 kg.

You can learn more about mass at: https://brainly.com/question/30940568

#SPJ11

We can prove that it is decidable whether a Turing machine M, on input w, ever attempts to move its head past the right end of the input string w by constructing a new Turing machine M' that simulates M on input w, and keeps track of the position of the head during the simulation.

The high-level description of M' is as follows

1 Copy the input string w onto a separate tape.

2 Initialize a counter c to 0.

3 Simulate M on w using the standard Turing machine simulation procedure, while keeping track of the position of the head at each step.

4 If the head attempts to move past the right end of the input string, increment the counter c by 1.

5 Continue simulating M until it halts.

6 If M halts in an accepting state, accept; otherwise, reject.

Since M' simulates M on input w, it will halt if and only if M halts on input w. If M attempts to move its head past the right end of w, M' will increment the counter c, which keeps track of this event. Therefore, after simulating M on w, M' can examine the value of c to determine whether M attempted to move its head past the right end of w.

Since the simulation of M on w can be performed by a Turing machine, and the operation of incrementing c is a basic arithmetic operation that can be performed by a Turing machine, the entire operation of M' can be performed by a Turing machine. Therefore, M' is a Turing machine that decides whether M, on input w, ever attempts to move its head past the right end of w.

Therefore, it is decidable.

To know more about Turing machine here

https://brainly.com/question/15966626

#SPJ4

Answer:We can use the formula:

P = V(rms) * I(rms)

where P is the power, V(rms) is the rms voltage, and I(rms) is the rms current.

First, we need to convert the power from MW to W:

40 MW = 40,000,000 W

Next, we can rearrange the formula to solve for I(rms):

I(rms) = P / V(rms)

Substituting the given values:

I(rms) = 40,000,000 W / 75,000 V = 533.33 A

Therefore, the rms current in the transmission lines is 533.33 A.

learn more about rms current

https://brainly.com/question/30097489?referrer=searchResults

#SPJ11

To calculate the time (t) taken for the ball to hit the ground: Using the kinematic equation,v = u + at0 = 22.8 - 9.8t9.8t = 22.8t = 22.8/9.8t = 2.33 s. Therefore, it will take 2.33 s for the ball to hit the ground.

To calculate the maximum height reached by the ball: Using the kinematic equation,s = ut + (1/2)at², Where,s = maximum height reached by the ball t = time taken to reach the maximum height, u = initial velocity of the ball, a = acceleration of the ball 0 = 22.8t - (1/2)(9.8)t²22.8t = (1/2)(9.8)t²4.9t² = 22.8tt² = 22.8/4.9t ≈ 1.20s.

Hence, at a time of 1.20 s, the ball reaches the maximum height.

Using the kinematic equation,v² = u² + 2asHere, v = final velocity = 0, u = initial velocity, a = acceleration = -9.8s = maximum height reached by the ball0 = (22.8)² + 2(-9.8)s515.84 = 19.6s.

The ball reaches a maximum height of approximately 26.3 m above the ground.

To calculate the velocity of the ball just before it hits the ground: Using the kinematic equation,v = u + atv = 22.8 - 9.8(2.33)v = -4.86 m/s.

Hence, the velocity of the ball just before it hits the ground is -4.86 m/s.

Learn more about kinematic equation here ;

https://brainly.com/question/28980475

#SPJ11

A. the car would have the greater speed between the two. and B. the truck would have a higher kinetic energy compared to the car when they are moving at the same speed.

(a) If the car and the truck have the same kinetic energy but the truck has more mass, then the **car has a greater speed**.

Kinetic energy is given by the equation KE = (1/2)mv^2, where m is the mass and v is the velocity (speed) of the object. Since both the car and the truck have the same kinetic energy, we can set their kinetic energy equations equal to each other: (1/2)m_car*v_car^2 = (1/2)m_truck*v_truck^2.

If the truck has more mass than the car (m_truck > m_car), to maintain the equation's balance, the car must have a greater velocity (speed) than the truck (v_car > v_truck). Therefore, the car would have the greater speed between the two.

(b) If the car and the truck are moving with the same speed, then the **kinetic energy of the truck would be greater** if it has more mass.

As mentioned earlier, kinetic energy is proportional to the mass and the square of the velocity. Since the car and the truck have the same speed, the kinetic energy equation for both objects becomes KE = (1/2)m*v^2.

However, since the truck has more mass than the car, the kinetic energy of the truck would be greater because kinetic energy is directly proportional to mass. Thus, the truck would have a higher kinetic energy compared to the car when they are moving at the same speed.

To learn more about kinetic energy
https://brainly.com/question/8101588
#SPJ11

a) When the length of the copper wire is reduced, the reading in the ammeter will remain unchanged as long as the resistance of the wire remains constant.

This is because the current flowing through a wire is inversely proportional to its length, according to Ohm's Law (V = IR), where V is the voltage, I is the current, and R is the resistance. As long as the voltage and resistance remain constant, the current will also remain constant.

b) If a thicker copper wire is used, the reading in the ammeter will decrease. This is because the resistance of a wire is inversely proportional to its cross-sectional area. When a thicker wire is used, its cross-sectional area increases, leading to a decrease in resistance. According to Ohm's Law, with a constant voltage, a decrease in resistance will result in an increase in current. Therefore, the ammeter reading will be higher when a thicker wire is used.

c) If a nichrome wire of the same length and cross-sectional area is used in place of the copper wire, the reading in the ammeter will depend on the resistance of the nichrome wire. Nichrome has a higher resistivity compared to copper, meaning it has a higher resistance for the same length and cross-sectional area. Therefore, when the nichrome wire is used, the resistance of the circuit increases, resulting in a decrease in current according to Ohm's Law. As a result, the ammeter reading will be lower when the nichrome wire is used

learn more about electric circuit here:

https://brainly.com/question/13443886

#SPJ11

There is a 3.375 Newton force between the two charges.

F = (k × q1 × q2) / r²

where F is the force, k is the Coulomb constant (k = 9 109 N/m2/C2), q1 and q2 are the charges' magnitudes, and r is their separation from one another.

In this instance, a 40 m gap separates a 2 C negative charge from a 3 C positive charge. The force will be attractive because opposing charges attract one another. As a result, we consider the charge's magnitude to be positive in the equation. When the values in the equation are substituted, we obtain:

F = (9 × 10⁹ N·m²/C²) × (2 C) × (3 C) / (40 m)²

(Rounded to three decimal places) F = 3.375 N

Therefore, there is a 3.375 Newton force between the two charges.

Learn more about force:

https://brainly.com/question/30526425

#SPJ1

The speed of light in fused quartz with a refractive index of n=1.458 is 2.06 ×[tex]10^8[/tex] m/s .

The speed of light in a vacuum is always constant and is equal to 3 x [tex]10^8[/tex]  m/s. However, when light passes through a medium, such as fused quartz with an index of refraction of n=1.458, the speed of light is slowed down. The relationship between the speed of light in a vacuum and the speed of light in a medium is given by the formula:

v = c/n

where v is the speed of light in the medium, c is the speed of light in a vacuum, and n is the refractive index of the medium.

Using the given wavelength of 589 nm, we can convert it to meters by dividing by [tex]10^9[/tex] :

589 nm = 589 x [tex]10^-^9[/tex]  m

Plugging in the values we get:

v = (3 x [tex]10^8[/tex]  m/s) / 1.458
v = 2.06 x [tex]10^8[/tex] m/s

Therefore, the speed of light in fused quartz with a refractive index of n=1.458 is approximately 2.06 x [tex]10^8[/tex]  m/s.

To know more about Refractive index refer here :

https://brainly.com/question/5170843

#SPJ11

The time difference between the two events in the second inertial system can be found using the equation:

Δx' = γ(Δx - vΔt)

Where Δx' is the observed distance between the two events in the second inertial system (15845 km), Δx is the actual distance between the two events in the first inertial system (8880 km), v is the relative velocity between the two inertial systems, and γ is the Lorentz factor given by:

γ = 1/√(1 - v^2/c^2)

where c is the speed of light.

Solving for Δt, we get:

Δt = (Δx - Δx'/γ) / v

Assuming the relative velocity between the two inertial systems is 0.6c (where c is the speed of light), we get:

γ = 1/√(1 - 0.6^2) = 1.25

Δt = (8880 km - 15845 km/1.25) / (0.6c)

Δt = (8880 km - 12676 km) / (0.6c)

Δt = (-3796 km) / (0.6c)

Using the conversion factor 1 km = 3.33564e-9 s, we can convert this to seconds:

Δt = (-3796 km) / (0.6c) * (1 km / 3.33564e-9 s)

Δt = -0.715 s

Therefore, the time difference between the two events in the second inertial system is -0.715 seconds. This negative sign indicates that the second event is observed to occur before the first event in this inertial system.

learn more  about inertial

#SPJ11

Answer:

The wave speed is given by:

v = √(T/μ)

where T is the tension in the cord and μ is the linear mass density (mass per unit length) of the cord.

μ = m/L

where m is the mass of the cord and L is its length.

So we have:

μ = m/L = 0.65 kg / 28 m = 0.023214 kg/m

v = √(T/μ) = √(150 N / 0.023214 kg/m) = 62.25 m/s

The time it takes for a pulse to travel from one support to the other is the distance between the supports divided by the wave speed:

t = d/v = 28 m / 62.25 m/s ≈ 0.45 s

Therefore, it will take approximately 0.45 seconds for a pulse to travel from one support to the other.

learn more about  pulse

https://brainly.com/question/31823574?referrer=searchResults

#SPJ11

The maximum oxidation state observed for titanium is +4. This is because titanium has four valence electrons and can lose all of them to form Ti4+ ion, which has a noble gas electron configuration of argon.

The maximum oxidation state observed for technetium is larger than the value for titanium.

Technetium is a radioactive element that exhibits a wide range of oxidation states, ranging from -1 to +7.

The most stable and commonly observed oxidation state of technetium is +7, which is larger than the maximum oxidation state observed for titanium.

This is due to the fact that technetium has a higher atomic number and therefore has more electrons available for bonding and oxidation.

Read more about the Oxidation state.

https://brainly.com/question/11313964

#SPJ11

The electric flux through the top surface of the cube is approximately 1.16 × 10³ N·m²/C.

To find the electric flux through the top surface of the cube, we will use Gauss's Law. The equation for Gauss's Law is:

Φ = Q / ε₀

where Φ represents the electric flux, Q is the charge enclosed (31.0 nC, or 31.0 × 10⁻⁹ C), and ε₀ is the vacuum permittivity constant (8.85 × 10⁻¹² C²/N·m²).

Since the charge is at the center of the cube, the flux will be evenly distributed through all six faces of the cube. To find the electric flux through the top surface, we simply need to divide the total flux by 6:

Φ_top_surface = (Q / ε₀) / 6

Φ_top_surface = (31.0 × 10⁻⁹ C) / (8.85 × 10⁻¹² C²/N·m²) / 6

After calculating the values, we get:

Φ_top_surface ≈ 1.16 × 10³ N·m²/C

The electric flux is approximately 1.16 × 10³ N·m²/C.

Learn more about Gauss's Law here: https://brainly.com/question/14773637

#SPJ11

The sets of conditions that produce a spontaneous process are ΔH < 0; ΔS > 0 (all temperatures) and ΔH > 0; ΔS > 0 (low temperatures).

A spontaneous process is determined by the Gibbs free energy (ΔG) equation: ΔG = ΔH - TΔS. There are four given conditions:
1. ΔH < 0; ΔS > 0: Since both ΔH and ΔS are favorable, the process is spontaneous at all temperatures.
2. ΔH < 0; ΔS < 0: The process may be spontaneous at low temperatures if ΔH dominates over TΔS.
3. ΔH > 0; ΔS < 0: Both ΔH and ΔS are unfavorable, and the process is not spontaneous at any temperature.
4. ΔH > 0; ΔS > 0: The process is spontaneous at low temperatures when the favorable ΔS dominates over the unfavorable ΔH.
Thus, the first and fourth conditions lead to a spontaneous process.

Learn more about spontaneous process here:

https://brainly.com/question/30738654

#SPJ11

The mass of the ladder can be calculated using the given information and the principles of statics, so the mass of the ladder is approximately: 6.12 kg.

First, we can use trigonometry to find the force of gravity acting on the ladder. The vertical component of the force of gravity is given by,
m*g,
where m is the mass of the ladder and
g is the acceleration due to gravity.

Using the angle between the ladder and the floor, we can find the magnitude of the force of gravity on the ladder as:
F_g = m*g*cos(65°).

Next, we can use Newton's second law to set up an equation for the forces in the vertical direction. Since the ladder is not moving vertically, the net force in this direction must be zero.

Therefore, the normal force of the wall on the ladder must balance the force of gravity, giving us:
F_N - F_g = 0

Substituting the given values, we get:
34.3 N - m*g*cos(65°) = 0

Solving for m, we get:
m = (34.3 N)/(g*cos(65°))

Using the value for the acceleration due to gravity at sea level, g = 9.81 m/s^2, we can calculate the mass of the ladder as:
m = (34.3 N)/(9.81 m/s^2*cos(65°)) = 6.12 kg

To know more about "Newton's second law" refer here:

https://brainly.com/question/13448325#

#SPJ11

The liquid's index of refraction is approximately 1.555.

determine the liquid's index of refraction given that a laser beam in air is incident on the liquid at an angle of 40.0° with respect to the normal and the laser beam's angle in the liquid is 24.0°.

To find the liquid's index of refraction, you can use Snell's Law:

n1 * sin(θ1) = n2 * sin(θ2)

where n1 and θ1 represent the index of refraction and angle of incidence for the first medium (air), and n2 and θ2 represent the index of refraction and angle of incidence for the second medium (liquid).

Convert angles to radians.
θ1 = 40.0° * (π/180) = 0.6981 radians
θ2 = 24.0° * (π/180) = 0.4189 radians

Use Snell's Law to solve for n2 (the liquid's index of refraction). The index of refraction for air, n1, is approximately 1.

1 * sin(0.6981) = n2 * sin(0.4189)

Step 3: Solve for n2.
n2 = sin(0.6981) / sin(0.4189) ≈ 1.555

So, The liquid's index of refraction is approximately 1.555.

Learn more about liquid's index of refraction

brainly.com/question/30111419

#SPJ11

The terms low-spin state and high-spin state refer to the electronic configuration of a metal ion in a complex.



In a low-spin state, the metal ion has paired electrons in its d-orbitals. This results in a smaller splitting of the energy levels, or a smaller crystal field stabilization energy (CFSE). The CFSE is the energy gained by the metal ion when it is surrounded by ligands. In a low-spin state, the CFSE is smaller because the electrons in the d-orbitals are paired, and the ligands have less effect on the metal ion.

In contrast, in a high-spin state, the metal ion has unpaired electrons in its d-orbitals. This results in a larger splitting of the energy levels, or a larger CFSE. In a high-spin state, the CFSE is larger because the electrons in the d-orbitals are unpaired, and the ligands have a greater effect on the metal ion.

Overall, the low-spin state is more stable than the high-spin state because it has a smaller CFSE. The energy difference between the two states is called the spectrochemical series, which is a ranking of ligands based on their ability to split the energy levels of a metal ion. Strong-field ligands tend to favor a low-spin state, while weak-field ligands tend to favor a high-spin state.

learn more about low-spin state

https://brainly.com/question/31385125

#SPJ11

The renal hilum lies on the medial surface of the kidney. The renal hilum is the area on the kidney where the renal artery, renal vein, and ureter enter or exit.

It is located on the concave medial surface of the kidney, which faces towards the vertebral column. The renal hilum is an important site for surgical access to the kidney and is also the location where the renal pelvis, which is the expanded upper end of the ureter, exits the kidney. The position of the renal hilum on the medial surface of the kidney also allows for the formation of the renal sinus, which is a cavity that contains blood vessels, lymphatic vessels, and nerves.

Learn more about kidney here;

https://brainly.com/question/31058361

#SPJ11

The magnet must do zero work to stay clinging onto a fridge if the magnet is not moving at all. The correct option is A. zero.

Work is defined as the energy transferred to or from an object by a force acting on the object, causing the object to move in the direction of the force.

In this case, the magnet is not moving and is simply held in place by the magnetic force between the magnet and the fridge.

The force of gravity and frictional force against the fridge may affect the magnet, but they are not directly related to the amount of work the magnet is doing. Therefore, no work is being done by the magnet, and the answer is A) zero.

To know more about magnetic force, refer here:

https://brainly.com/question/3160109#

#SPJ11

The current in the loop at t=0.0s is zero since there is no change in the magnetic field at that time. The current in the loop at t=1.0s is -2.9 A. The current in the loop at t=2.0s is -5.7 A.

PART B: The current in the loop at t=1.0s can be calculated using Faraday's law of electromagnetic induction, which states that the induced emf in a loop is equal to the negative rate of change of magnetic flux through the loop. In this case, the magnetic flux through the loop is equal to the product of the magnetic field and the area of the loop, or Φ=B*A.

Therefore, the induced emf is given by ε=-dΦ/dt=-B*dA/dt=-B*A*(Δt)^-1. The current in the loop is then given by I=ε/R, where R is the resistance of the loop. Plugging in the given values, we get:[tex]\phi = (4-2(1))^2*(0.2)^2=0.24 Tm[/tex]²

ε=-dΦ/dt=-0.4 T·m²/s

I=ε/R=-2.9 A.

PART C: The current in the loop at t=2.0s can be calculated using the same method as in part B, but with the magnetic field value at t=2.0s. Plugging in the given values, we get: [tex]\phi= (4-2(2))^2*(0.2)^2=0.08 Tm^{2}[/tex]

ε=-dΦ/dt=-0.8 T·m²/s

I=ε/R=-5.7 A.

To know more about current, refer here:

https://brainly.com/question/30764391#

#SPJ11

The factor of safety using the Coulomb-Mohr theory, for the state of plane stress (a) σx = 12 kpsi, σy = 0 kpsi, τxy = –8 kpsi is 0.389, and (b) σx = -10 kpsi, σy = 15 kpsi, τxy = 10 kpsi is 0.136

Sut = 36 kpsi, Suc = 35 kpsi, εf = 0.045

(a) σx = 12 kpsi, σy = 0 kpsi, τxy = –8 kpsi

The maximum and minimum principal stresses are given by:

[tex]\sigma_1 = \frac{{\sigma_x + \sigma_y}}{2} + \sqrt{\left(\frac{{\sigma_x - \sigma_y}}{2}\right)^2 + \tau_{xy}^2}[/tex]

[tex]\sigma_2 = \frac{{\sigma_x + \sigma_y}}{2} - \sqrt{\left(\frac{{\sigma_x - \sigma_y}}{2}\right)^2 + \tau_{xy}^2}[/tex]

Substituting the values, we get:

σ1 = 14 kpsi, σ2 = -2 kpsi

The factor of safety based on the Coulomb-Mohr theory is given by:

[tex]FS = \left(\frac{\sigma_1}{S_{ut}}\right) + \left(\frac{\sigma_2}{S_{uc}}\right)[/tex]

Substituting the values, we get:

FS = (14/36) + (-2/35)

FS = 0.389

(b) σx = -10 kpsi, σy = 15 kpsi, τxy = 10 kpsi

The maximum and minimum principal stresses are given by:

[tex]\sigma_1 = \frac{{\sigma_x + \sigma_y}}{2} + \sqrt{\left(\frac{{\sigma_x - \sigma_y}}{2}\right)^2 + \tau_{xy}^2}\\[/tex]

[tex]\sigma_2 = \frac{{\sigma_x + \sigma_y}}{2} - \sqrt{\left(\frac{{\sigma_x - \sigma_y}}{2}\right)^2 + \tau_{xy}^2}[/tex]

Substituting the values, we get:

σ1 = 23 kpsi, σ2 = -18 kpsi

The factor of safety based on the Coulomb-Mohr theory is given by:

[tex]FS = \left(\frac{\sigma_1}{S_{ut}}\right) + \left(\frac{\sigma_2}{S_{uc}}\right)[/tex]

Substituting the values, we get:

FS = (23/36) + (-18/35)

FS = 0.136

Therefore, the factor of safety at the optimum solution for (a) is 0.389 and for (b) is 0.136.

Learn more about Coulomb-Mohr theory at: https://brainly.com/question/15740246

#SPJ11

Like color, sound waves have two properties: amplitude (height) and frequency. Frequency is a measure of the number of oscillations or cycles of the wave per unit of time and corresponds to our perception of pitch.

The frequency of a sound wave determines the pitch that we perceive. Higher frequencies correspond to higher pitches, while lower frequencies correspond to lower pitches. For example, a high-frequency sound wave would be perceived as a high-pitched sound, like a whistle, whereas a low-frequency sound wave would be perceived as a low-pitched sound, like a deep rumble. Amplitude, on the other hand, relates to the intensity or loudness of the sound wave, with higher amplitudes corresponding to louder sounds. The frequency of a sound wave is measured in hertz (Hz) and represents the number of complete oscillations the wave makes in one second. It determines how "high" or "low" we perceive the pitch of a sound.

Learn more about number of oscillations or cycles here:

https://brainly.com/question/31472633

#SPJ11

The statement "In reality, when a circuit is first connected to a power source the current through the circuit does not jump discontinuously from zero to its maximum value" is True.

This is because the behavior of an electrical circuit is governed by the principles of electromagnetism, which include the laws of induction and capacitance. When a circuit is first connected to a power source, the voltage across the circuit changes instantaneously from zero to its maximum value, which can cause a transient response in the circuit. This transient response can cause the current in the circuit to increase rapidly, but it does not jump discontinuously from zero to its maximum value.

The rate of change of current in the circuit is determined by the inductance and capacitance of the circuit. An inductor resists changes in the current flow through a circuit, while a capacitor resists changes in the voltage across a circuit. These properties cause the current in the circuit to increase gradually until it reaches its steady-state value.

In addition, the resistance of the circuit also affects the rate of change of current. A circuit with high resistance will have a slower rate of change of current compared to a circuit with low resistance.

Therefore, the current in a circuit does not jump discontinuously from zero to its maximum value when the circuit is first connected to a power source due to the principles of electromagnetism and the properties of the circuit components.

To learn more about circuit refer here:

https://brainly.com/question/27206933

#SPJ11

The James Webb Space Telescope and the ground-based Keck telescopes will have mirrors about 2 meters in diameter.

Both telescopes will have primary mirrors made of multiple hexagonal-shaped segments. However, they differ in other aspects. The James Webb Space Telescope is designed to operate at infrared wavelengths, not ultraviolet, and it is a reflecting telescope, while the Keck telescopes are also reflecting telescopes but operate across a range of wavelengths, including visible and near-infrared. The James Webb Space Telescope and the ground-based Keck telescopes will have mirrors about 2 meters in diameter. Both telescopes will have primary mirrors made of multiple hexagonal-shaped segments.

learn more about Telescope here:

https://brainly.com/question/19349900

#SPJ11

the distance covered by traveling at a speed of 40 km/h for 5 hours is 200 km.

1) Distance between 2 cities = 375 km

Time taken by John to travel between 2 cities = 8 hours

We can use the formula:

Speed = Distance / Time

Speed = 375 km / 8 hours = 46.875 km/h

Therefore, John traveled at a speed of 46.875 km/h.2) Speed = 40 km/h

Time = 5 hours

We can use the formula:

Distance = Speed × Time

Distance = 40 km/h × 5 hours = 200 km

Therefore, the distance covered by traveling at a speed of 40 km/h for 5 hours is 200 km.

learn more about speed here

https://brainly.com/question/13943409

#SPJ11