Answer:
16.7%
Explanation:
40 ml of salt water + 200 ml of solution = 240 ml
40/240 = 4/24 = 1/6=16.7%
crude oil is a liquid kind of___________
what is the answer?
#let's study
Dont need work pls help
what is the final volume (L) of each of the following diluted solutions? a 0.70 M HCl solution prepared from 25 mL of a 6.0 M HCl solution
The final volume of diluted solution is 214.39 mL
From the question given above, the following data were obtained:
Molarity of diluted solution (M₂) = 0.7 M
Molarity of stock solution (M₁) = 6 M
Volume of stock solution (V₁) = 25 mL
Volume of diluted solution (V₂) = ?M₁V₁ = M₂V₂
6 × 25 = 0.7 × V₂
150 = 0.7 × V₂
Divide both side by 0.7
V₂ = 150 / 0.7
V₂ = 214.39 mLTherefore, the volume of the diluted solution is 214.39 mL
Learn more: https://brainly.com/question/16294341
What is the formula for sodium phosphate
Answer:
Explanation:
It''s chemical formula is Na3PO4
p-Nitrobenzaldehyde is more reactive toward nucleophilic additions than pmethoxybenzaldehyde. Explain
The presence of electron donating methoxy group in p-methoxybenzaldehyde , makes it less reactive towards nucleophilic additions.
Nucleophilic addition reactions that involve of p-Nitrobenzaldehyde and p-methoxybenzaldehyde both occur at the C=O functional group. The electron density around the carbonyl is a key factor that controls the reactivity of each compound.
In p-Nitrobenzaldehyde, the electron withdrawing nitro group decreases the electron density around the carbonyl making it more vulnerable to nucleophilic attack.
In p-methoxybenzaldehyde, the methoxy group donates electrons by resonance towards the carbonyl thereby increasing the electron density around it so that it is less reactive towards nucleophillic addition reaction.
The nucleophilic attack on p-Nitrobenzaldehyde leads to more resonance structures than nucleophilic attack on p-methoxybenzaldehyde.
Learn more: https://brainly.com/question/4699407
the process of breaking food is to release energy is called _____
Answer:
The process by which food is broken down to release energy is called respiration
I hope it helps.
Answer:
Respiration
Explanation:
hope this helps.
g Consider an ideal atomic gas in a cylinder. The upper part of the cylinder is a moveable piston of negligible weight. The height of the cylinder is 30 cm. The outside pressure is 105 Pa. The temperature of the gas is kept at 250 K throughout the experiment. The volume filled by the gas is 2.0 l. Now assume that solid cylindrical weight with a mass of 3 kg is dropped onto the piston from a height of 10 m. Cylinder and piston have the same diameter. Assume that the kinetic energy of the weight is completely converted into heat transferred into the gas cylinder. Calculate the change of entropy of the gas and of the environment. Please read this text very carefully
A cylindrical weight with a mass of 3 kg is dropped onto the piston from a height of 10 m. The entropy of the gas is 1.18 J/K and the change in the entropy of the environment is -1.18 J/K.
A cylindrical weight with a mass (m) of 3 kg is dropped, that is, its initial velocity (u) is 0 m/s and travels 10 m (s). Assuming the acceleration (a) is that of gravity (9.8 m/s²). We can calculate the velocity (v) of the weight in the instant prior to the collision with the piston using the following kinematic equation.
[tex]v^{2} = u^{2} + 2as = 2 (9.8 m/s^{2} ) (10m) \\\\v = 14 m/s[/tex]
The object with a mass of 3 kg collides with the piston at 14 m/s, The kinetic energy (K) of the object at that moment is:
[tex]K = \frac{1}{2} m v^{2} = \frac{1}{2} (3kg) (14m/s)^{2} = 294 J[/tex]
The kinetic energy of the weight is completely converted into heat transferred into the gas cylinder. Thus, Q = 294 J.
Given all the process is at 250 K (T), we can calculate the change of entropy of the gas using the following expression.
[tex]\Delta S_{gas} = \frac{Q}{T} = \frac{294 J}{250K} = 1.18 J/K[/tex]
The change in the entropy of the environment, has the same value but opposite sign than the change in the entropy of the gas. Thus, [tex]\Delta S_{env} = -1.18 J/K[/tex]
A cylindrical weight with a mass of 3 kg is dropped onto the piston from a height of 10 m. The entropy of the gas is 1.18 J/K and the change in the entropy of the environment is -1.18 J/K.
Learn more: https://brainly.com/question/22655760
*1. The internal energy with a system associated with the motion of particles and that can be added to a substance is called_____.
A. Thermal energy
B. Electrostatic forces
C. Temperature
D. Kinetic energy
•
•
•
*2. Which statement describes the effect of adding more energy to a system, assuming a phase change does not occur?
A. The particles within the system will have greater motion, and the temperature will decrease.
B. The particles within the system will have greater motion, and the temperature will increase.
C. The particles within the system will have less motion, and the temperature will increase.
D. The particles within the system will have less motion, and the temperature will decrease.
•
•
•
*3. Which statement correctly describes how attractions that hold particles break?
A. Attractions due to electrostatic forces. When particles have low enough energy, these forces can no longer keep particles together.
B. Attractions due to gravitational forces. When particles have low enough energy, these forces can no longer keep particles together.
C. Attractions due to gravitational forces. When particles move fast enough, these forces can no longer keep particles together.
D. Attractions due to electrostatic forces. When particles move fast enough, these forces can no longer keep particles together.
•
•
•
*4. Which statement explains why a rubber band analogy is not a perfect comparison for bonds in a substance when considering phase changes?
A. For a phase change from liquid to gas, the bonds break completely and particles can move independently of each other.
B. For a phase change from liquid to gas, the bonds do not break completely and the particles can still slide past each other.
C. For a phase change from solid to liquid, the bonds break completely and particles can move independently of each other.
D. For a phase change from solid to liquid, the bonds do not break completely in the particles can still slide past each other.
•
•
•
*5. The boiling point of benzene is 80°C. Which pair of samples will have the same average kinetic energy as benzene molecules?
A. Two samples of liquid benzene, one at 70°C in the other at 80°C.
B. A sample of liquid benzene at 70°C and a sample of gaseous benzene at 90°C.
C. Two samples of gaseous benzene, one at 80°C in the other at 90°C.
D. A sample of liquid benzene at 80°C and a sample of gaseous benzene at 80°C.
Answer:
1. A/Thermal Energy
2. B/The particles within the system will have greater motion, and the temperature will increase.
3. C/Attractions occur due to electrostatic forces. When particles move fast enough, these forces can no longer keep particles together.
4. D/ For a phase change from solid to liquid, the bonds do not break completely and particles can still slide past each other.
5. D/ a sample of liquid benzene at 80ºC and a sample of gaseous benzene at 80ºC
Explanation:
I took the Test.
1. Internal energy associated with systems and particles is thermal energy. Thus, option A is correct.
The internal energy has been described as the energy that has been assessed by the molecules and bonds at the STP. Thermal energy has been the energy of particular molecules and the system comprising all the molecules have the summation of the thermal energy.
Thus, internal energy associated with systems and particles is thermal energy. Thus, option A is correct.
2. The addition of energy results in greater motion with an increase in temperature has been representation no phase change. Thus, option B is correct.
The addition of energy to the substance results in the increased motion of the particles. The energy higher than the threshold energy has been responsible for the phase change of the substance.
The addition of energy results in greater motion with an increase in temperature has been representation no phase change. Thus, option B is correct.
3. The movement of the particles under the gravitational attraction is not enough to hold the particles together at a longer distance. Thus, option B is correct.
The attraction has been the force that has been responsible for holding the particles in a molecule. Different attractions have a different levels of stability and strength.
The movement of the particles under the gravitational attraction is not enough to hold the particles together at a longer distance. Thus, option B is correct.
4. The phase change of the molecules has been mediated by overcoming the force of attraction that allows the molecules to move freely. The solid to liquid phase change has been mediated with the breaking of the attraction between the bonds allowing free movement.
Thus, statement 4 is incorrect, and option D is correct.
5. The kinetic energy has been the energy possessed by the moving molecules in the medium. The molecules in liquid and gas have been possessing the same energy at the same temperature, Thus, option D is correct.
For more information about energy and electrostatic interactions, refer to the link:
https://brainly.com/question/6170401
My QUESTION
A car is travelling 35 miles per hour. How fast is it going when
measured in meters per minute?
Answer:
933.33 m/ min
Explanation:
1 mile = 1.6 km
So the car travels 1.6× 35 km in 1 hour
One hour has 60 minutes
So speed of car = 1.6×35 km / 60 minutes
1km = 1000 m
Speed = 1.6×35×1000 m/ 60 minutes
= 933.33 meters per minute
A car is traveling 35 miles per hour. The speed that is measured in meters per minute is 933.33 m/ min.
What is speed?Speed is the dimension of distance. It is calculated in meters per second. It is the rate of change of an object in a direction. Speed is calculated by dividing the distance by time. It is a scalar quantity.
Given, that a car is traveling 35 miles per hour. The speed is given, in miles we just have to convert the miles into meters per minute. Miles if the English unit of measurement and meter is the SI unit of measurement.
1 mile = 1.6 km
So the car travels 1.6× 35 km in 1 hour
One hour has 60 minutes
So speed of car = 1.6×35 km / 60 minutes
1km = 1000 m
Speed = 1.6 × 35 × 1000 m/ 60 minutes
= 933.33 meters per minute
Thus, the speed of the car is 933.33 m/ min.
To learn more about speed, refer to the link:
https://brainly.com/question/7359669
#SPJ2
helpp
What mass of carbon dioxide will be produced if
144 g of carbon react with 384 g of oxygen gas
according to the equation C+02 → CO2?
The mass of the carbon dioxide that will be produced when 144 g of carbon react with 384 g of oxygen gas is 528 g
We'll begin by calculating the masses of C and O₂ that reacted and the mass of CO₂ produced from the balanced equation.
C + O₂ —> CO₂
Molar mass of C = 12 g/mol
Mass of C from the balanced equation = 1 × 12 = 12 g
Molar mass of O₂ = 2 × 16 = 32 g/mol
Mass of O₂ from the balanced equation = 1 × 32 = 32 g
Molar mass of CO₂ = 12 + (2×16) = 44 g/mol
Mass of CO₂ from the balanced equation = 1 ×44 = 44 g
SUMMARY:
From the balanced equation above,
12 g of C reacted with 32 g of O₂ to produce 44 g of CO₂
Next, we shall determine the limiting reactantFrom the balanced equation above,
, 12 g of C reacted with 32 g of O₂.
Therefore,
144 g of C will react with = (144 × 32)/12 = 384 g of O₂.
From the calculations made above, we can see that both C and O₂ are sufficient for the reaction. Thus, C and O₂ are both limiting reactants.
Finally, we shall determine the mass of CO₂ obtained from the reaction.From the balanced equation above,
balanced equation above, 12 g of C reacted to produce 44 g of CO₂.
Therefore,
144 g of C will react to produce = (144 × 44)/12 = 528 g of CO₂.
Thus, the mass of CO₂ obtained from the reaction is 528 g
Learn more: https://brainly.com/question/12968502
Which of the following types of models is generally used to predict long-term events? a. idea model b. physical model c. computer model d. none of the above Please select the best answer from the choices provided A B C D Mark this and return
Answer:
C
Computer model is generally used to predict long-term events
I hope it helps.
A gas has a volume of 3.7 liters with a pressure of 1.75 atm. What is the pressure of the gas if its volume is raised to 4.5 L?
Answer: 251 K
Explanation: hope this helps :)
answer this please thank you
Answer:
6am
Explanation:
answer this please thank you
How many grams are in 0.787 moles of kcn
Answer:
=> moles = Given mass/molar mass
=> 0.787 = Given mass/(39 + 12 + 14)
=> 0.787 = Given mass/65
=> mass = 0.787 × 65
=> mass = 51.155 g
answer this please ......................
Answer:
River esk the third one is righttt
The sum of the number of proteins and neutrons in an atoms nucleus is its __________ ___________.
Answer:
Mass Number
Explanation:
In nuclear physics, the sum of the numbers of protons and neutrons present in the nucleus of an atom.
Please vote brainliest!
HELP ME OUT PLEASE!!!!!!!!!
Compare and contrast model A with model C. How are they alike: How are they different?
A) They are composed of different elements in the same ratio.
B) They are composed of the same elements in different ratios.
C) They are composed of different elements in different ratios
D) The are composed of the same elements but the bond types differ
Answer:
Model C has more double the oxygen than A. I think it is B
Explanation:
how many moles are there in 3.25x10^20 particles of lead oxide
Answer:
5.39 X 10-4
Explanation:
Try Checking It Out If It Right Or Not
Define electrolysis
Electrolysis is the production of a chemical reaction by passing an electric current to liquid containing ions.
A strand of DNA has the following string of bases:
TAACGTCG
What is the order of bases of the RNA molecule that is built from this DNA?
The genetic makeup of the majority of these organisms is either RNA or DNA. For instance, some viruses' genetic material may be RNA whereas others' genetic material may be DNA. RNA is present in the Human Immunodeficiency Virus (HIV), which after adhering to the host cell, transforms into DNA.
DNA is a collection of molecules that is in charge of transporting and passing genetic information from parents to children. A ribonucleic acid called RNA aids in the body's production of proteins. In the human body, new cells are created as a result of this nucleic acid.
Instead of thymine, uracil is present in RNA. All other bases are same as DNA like adenine, guanine and cytosine. The order of bases in RNA is:
UAACGUCG.
To know more about RNA, visit;
https://brainly.com/question/14317249
#SPJ1
Name the following Type 3 compound
1. PCIE
2. P406
3. SF6
4. SO3
5. SO2
6. N203
7. SiO2
8. O2F2
9. XeF6
Answer:
32
Explanation:
Hot air balloons are open at their lower and end. A basket is suspended from the balloon and can take several passengers as well as the pilot. A propane burner fixed to the basket is used to heat up the air in the balloon A hot balloon has a volume of 1500 m3 and its volume does not change when the enclosed air is heated.
1) Use the ideal gas equation, pV=nRT. to calculate how many molecules of the balloon contains at a temperature of 10 °C and a pressure 10.1 KP.
2) Calculate the mass of air it contains, assuming an average M of 29.
(a) The number of molecules contained by the balloon at the given condition is 6,438.97 moles.
(b) The mass of air in the balloon is 186.73 kg.
The given parameters;
volume of the balloon, V = 1500 m³temperature, T = 10⁰C = 273 + 10 = 283 Kpressure, = P = 10.1 kPa = 10,100 PaThe number of molecules contained by the balloon at the given condition is calculated as follows;
[tex]PV = nRT[/tex]
where;
R is ideal gas constant = 8.314 J/mol.Kn is the number of moles air in the balloon;[tex]n = \frac{PV}{RT} \\\\n = \frac{10,100 \times 1500}{8.314 \times 283} \\\\n = 6,438.97 \ moles[/tex]
The mass of air in the balloon is calculated as;
[tex]n = \frac{m}{M} \\\\m = nM\\\\m = 6,438.97\ moles \ \times \ 29 \ g/mol\\\\m = 186.73 \ kg[/tex]
Learn more here:https://brainly.com/question/13248885
What is the temperature, in Celsius, of 20.8 g of carbon dioxide (CO2) in a 575 mL container under 1.5 atm of pressure?
Answer:
Ideal Gas Law Calculator. Easily calculate the pressure, volume, temperature or quantity in moles of a gas using this combined gas law calculator (Boyle's law calculator, Charles's law calculator, Avogadro's law calculator and Gay Lussac's law calculator in one).Supports a variety of input metrics such as Celsius, Fahrenheit, Kelvin, Pascals, bars, atmospheres, and volume in both metric and
GIVING BRAINLY AND 20 POINTS
A sound wave in air has the wavelength of 1.36 m. Calculate its frequency? Assume the speed is 340 m/s.
Answer: the answer is 0.074Hz
Explanation:
Given, (In air)
Velocity V=340m/s
Frequency f=20,000Hz
Wavelegth λ=?
V=f.λ
λ=
F
V
=
20,000
340
=0.017Hz
Also, Given (in Water)
Velocity, V=1480m/s
Frequencyf=20,000Hz
wavelength, λ=?
V=F.λ
λ=
F
V
=
20,000
1480
=0.074Hz
Answer:
frequency
Explanation:
frequency is velocity/ wavelength
340/1.36
250
A student mixes some soap with water and then blows through a straw into the solution. Bubbles form. Do you think a chemical change has taken place? Explain
Answer:
No it has not.
Explanation:
The actual chemical compound has not changed, the materials have mixed but no reaction has taken place. Blowing the bubbles causes a physical change. Hope this helped!
Mixing soap and water and forming bubbles is a physical change as there is no change in composition.
What is a physical change?
Physical changes are defined as changes which affect only the form of a substance but not it's chemical composition. They are used to separate mixtures in to chemical components but cannot be used to separate compounds to simpler compounds.
Physical changes are always reversible using physical means and involve a change in the physical properties.Examples of physical changes include melting,boiling , change in texture, size,color,volume and density.Magnetism, crystallization, formation of alloys are all reversible and hence physical changes.
They involve only rearrangement of atoms and are often characterized to be changes which are reversible.
Learn more about physical changes,here:
https://brainly.com/question/17931044
#SPJ2
Draw the Lewis structure for C2H4 (whose skeletal structure is H2CCH2). Draw the molecule by placing atoms on the grid and connecting them with bonds. Include all lone pairs of electrons. - CHONSPFBrClIXMore
Answer:
This is a picture of it hope this helps!
The Lewis structure along with bonds for ethene (C₂H₄) is drawn below-
A Lewis Structure is a very simplified representation of the valence shell electrons in a molecule. It is used to show how the electrons are arranged around individual atoms in a molecule.
The shared pairs of electrons are drawn as lines between atoms, while lone pairs of electrons are drawn as dots next to atoms.
They also display the total number of lone pairs present in each of the atoms that constitute the molecule.
Learn more about Lewis structure, here:
https://brainly.com/question/29603042
#SPJ6
Nail polish remover is something that girls just can't do without. Which of the following has been used as the active ingredient in nail polish remover?
limonene
acetone
methanol
ethanol
Answer:
Acetone has been used as the active ingredient in nail polish remover.
How many moles of c3h6will be consumed when 4.11 mol of co2 are produced in the following equation 2c3h6 +9o2 - 6co2 + 6H2o
Answer: a.1.37 b.4.11 c.6.00 d.12.3
Explanation:
Calculate the percent by mass of each element in LiClO2.
% Li:
% Cl:
% O:
ok done. Thank to me :>
Answer: Mass percent of Li: total mass Li = 6.94 g/mol. % Li = mass Li mass LiClO 2 × 100 % Li = 6 . ...
Mass percent of Cl: total mass Cl = 35.45 g/mol. % Cl = mass Cl mass LiClO 2 × 100 % Cl = 35 . ...
Mass percent of O: total mass O = 32.00 g/mol.
Explanation:
What is a solute?
substance in which another substance dissolves and mixes evenly A
a solution unable to be separated by any means B
a mixture that can easily be separated with simple tools C
the substance that dissolves into another substance D
[tex]▪▪▪▪▪▪▪▪▪▪▪▪▪ {\huge\mathfrak{Answer}}▪▪▪▪▪▪▪▪▪▪▪▪▪▪[/tex]
The Correct choice is ~ D
Solute is the substance that dissolves into another substance