A moving van smoothly travels at constant speed with a stone softly affixed to the center of its roof ( velocity). When the glue fails, the stone tumbles to the ground and lands precisely below the ceiling's middle.
In physics, what is velocity?In terms of physics, velocity is a vector measure of the motion's direction and speed. The shift that occurs in an object's position relative to a reference point and time is a more precise definition of velocity.
Does speed mean velocities?Why is it wrong to use the phrases velocity and speed interchangeably? It is clear why. Velocity, as opposed to speed, refers to the pace and direction of the an object's movement as it moves down a path.
To know more about velocity visit:
brainly.com/question/17127206
#SPJ1
A bowling ball of mass 7.2 kg and radius 10 cm rolls without slipping down a lane at 2.6 m/s Calculate its total kinetic energy. in J
The total kinetic energy of the bowling ball of mass 7.2 kg and radius 10 cm rolling without slipping down a lane at 2.6 m/s is 28.906 J.
We need to use the formula for the total kinetic energy of a rotating object, which is given by:
K = (1/2) Iω² + (1/2) mv²
where K is the total kinetic energy, I is the moment of inertia of the object, ω is the angular velocity of the object, m is the mass of the object, and v is the linear velocity of the object. Since the bowling ball is rolling without slipping, we can relate the linear velocity and the angular velocity as follows:
v = rω
where r is the radius of the bowling ball. Therefore, we can rewrite the formula for the total kinetic energy as:
K = (1/2) I (v/r)² + (1/2) mv²
Now, we need to find the moment of inertia of the bowling ball. The moment of inertia of a solid sphere about its diameter is given by:
I = (2/5) mr²
where r is the radius of the sphere and m is the mass of the sphere. Therefore, we can substitute the values given in the problem to get:
I = (2/5) (7.2 kg) (0.1 m)²
I = 0.0288 kg m²
Now, we can substitute all the values in the formula for the total kinetic energy to get:
K = (1/2) (0.0288 kg m²) (2.6 m/s)²/ (0.1 m)² + (1/2) (7.2 kg) (2.6 m/s)²
K = 3.9936 J + 24.912 J
K = 28.906 J
Therefore, the total kinetic energy of the bowling ball is 28.906 J.
More on kinetic energy: https://brainly.com/question/29257121
#SPJ11
Students in Chuck Stone's lab measure the speed of a steel ball to be 8.0 m/s when launched horizontally from a 1.0 m high tabletop. Their objective is to place a 20cm tall coffee can on the floor to catch the ball. Show that they score a bull's eye when the can is placed 3.2m from the base of the table.
The coffee can must be placed at least 0.2 meters below the final horizontal position, which would be about 3.2 meters from the base of the table. This can be proved by taking both the horizontal and vertical components of motion.
What is the motion of ball?We can use both the equations for horizontal and vertical motion. Since the ball is launched horizontally, only the horizontal equation is needed:
Horizontal Motion: xf = xi + vxt
where:
xf = final horizontal position
xi = initial horizontal position
vx = horizontal velocity
t = time elapsed
Since we know the initial horizontal position, the horizontal velocity, and the time elapsed, we can calculate the final horizontal position:
xf = 0 + 8.0 m/s × 2.5 s = 20 m
Now, the coffee can is 20 cm tall, which is equal to 0.2 m. The initial vertical position of the ball is 1.0 m. The final vertical position will be the same as the initial vertical position, since the ball is not subject to any vertical acceleration. Therefore, the coffee can must be placed 0.2 m below the final horizontal position, which would be 3.2 m from the base of the table.
Learn more about Motion here:
https://brainly.com/question/17675825
#SPJ11
It is currently thought that moons typically do not form near:
a. Any planets of binary star systems.
b. Terrestrial planets such as Earth and Mars.
c. Jovian planets such as Jupiter and Saturn.
d. Any planets of isolated stars
It is currently thought that moons typically do not form near (a) any planets of binary star systems.
What is the role of binary star systems?Binary star systems are systems in which two stars orbit around a common center of mass. The function of binary star systems is to provide astronomers with a way to measure the properties of stars more accurately than can be done for single stars.
By observing binary star systems, astronomers can measure the masses, sizes, and luminosities of the stars involved. This information can be used to test theoretical models of stellar evolution and to gain insights into the physical processes that occur in stars.
Learn more on moons here: https://brainly.com/question/31119496
#SPJ1
a. The Phillips curve is πt = πt^e+ (m + z) – αutRewrite this relation as a relation between the deviation of the unemployment rate from the natural rate of unemployment (NRU), inflation and expected inflation.b. When we derived the natural rate of unemployment using the wage setting and price setting equations, what condition on the price level and expected price level was imposed in part a?
a protostar that will eventually turn into a star like the Sun is significantly a) smaller; b) more luminous; c) fainter; d) less massive than the Sun.
d) less massive than the Sun. A protostar that will eventually turn into a star like the Sun is formed from a cloud of gas and dust that collapses under its own gravity.
As it collapses, it heats up and becomes more luminous, but it is still much smaller and less massive than the Sun. Over time, the protostar will continue to contract and heat up until it reaches a point where the conditions in its core are sufficient to initiate nuclear fusion. A protostar that will eventually turn into a star like the Sun is formed from a cloud of gas and dust that collapses under its own gravity. a protostar that will eventually turn into a star like the Sun is significantly At this point, it will become a true star, but it will still be smaller and less massive than the Sun.
learn more about protostar here
https://brainly.com/question/28852972
#SPJ4
if the open circuit voltage of a circuit containing ideal sources and resistors is measured at 10 , while the current through the short circuit across the circuit is 400 , what would be the power absorbed by a 60 resistor placed across the terminals?
The power absorbed by a 60 resistor placed across the terminals would be 166.67 mW.
The power absorbed by a 60 ohm resistor placed across the terminals of a circuit containing ideal sources and resistors can be calculated using the formula Power = (Open Circuit Voltage)2 / Resistance. In this case, the open circuit voltage is 10V and the resistance is 60 ohms. Therefore, the power absorbed by the resistor is 102 / 60 = 166.67 mW.
To calculate the open circuit voltage, you first need to find the total current in the circuit. The total current is equal to the current through the short circuit, 400A. Then, using Ohm's law (V = I x R), you can calculate the open circuit voltage by multiplying the total current by the total resistance of the circuit.
To know more about power, refer here:
https://brainly.com/question/14632673#
SPJ11#
a solid plastic cylinder of radius 2.33 cm and length 6.30 cm. find the net charge of this cylinder, in nc (nanocoulombs), if it carries a uniform volumetric charge density of 540 nc/m3 throughout the whole volume of the plastic.
The net charge of a solid plastic cylinder of radius 2.33 cm and length 6.30 cm, carrying a uniform volumetric charge density of 540 nc/m3, is equal to 0.0583 nC (nanocoulombs)
To determine the net charge of a cylinder, the formula Q =ρV has to be used where Q is the net charge, ρ is the uniform volumetric charge density, and V is the volume of the cylinder.
ρ is given as 540 nc/m³.
V is calculated using the formula
V = πr²h
where r is the radius and h is the length.
π is approximated to be 3.14.
h is given as 6.30cm
r is 2.33cm
so the calculation for V becomes;
V = πr²h
V = 3.14 x 2.33² x 6.3
V = 108.02 cm³ or 108.02 x 10⁻⁶ m³.
Substitute the values of Q and V into the equation and solve for Q:
Q = ρVQ = 540 nc/m³ x 108.02 x 10⁻⁶ m³
Q = 0.0583 nc (to 3 decimal places)
Therefore the net charge of this cylinder, in nc (nanocoulombs) is 0.0583nc.
Learn more about net charge at https://brainly.com/question/26036371
#SPJ11
in which way is the planet uranus unique?responses it has seasons. it has seasons. it has a hot interior. it has a hot interior. it lacks an atmosphere. it lacks an atmosphere. it rotates on its side.
The planet Uranus is unique in that it rotates on its side, with an axial tilt of approximately 98 degrees.
This means that Uranus essentially orbits the sun on its side, with its poles facing towards and away from the sun at different times during its orbit.
This unusual orientation results in extreme seasonal variations, with each pole experiencing over 20 years of continuous sunlight followed by over 20 years of darkness.
Additionally, Uranus has a relatively cold interior and a thick atmosphere composed primarily of hydrogen, helium, and methane.
Therefore, the response "it rotates on its side" is correct which makes planet Uranus unique.
Learn more about Urenus:
https://brainly.com/question/28248603
#SPJ11
What centripetal force is needed to keep a 2. 5kg model plane orbiting in a 45m radius if it completes one orbit in 12s?
A centripetal force of 0.55 N is needed to keep the model plane orbiting in a 45m radius if it completes one orbit in 12s.
To find the centripetal force needed to keep a 2.5kg model plane orbiting in a 45m radius, we can use the formula:
F = (m × v²) / r
where F is the centripetal force, m is the mass of the plane, v is its velocity, and r is the radius of the orbit. We can find the velocity of the plane using the formula:
v = 2 × π × r / T
where T is the time it takes to complete one orbit. In this case, T = 12s, so we get:
v = 2 × π × 45m / 12s = 9.42 m/s
Substituting the values into the first formula, we get:
F = (2.5kg × (9.42m/s)²) / 45m = 0.55 N
Learn more about the centripetal force at
https://brainly.com/question/11324711
#SPJ4
a 421 kg block is puled up a 4.54 degree incline by a constant force f of 3282 n. the coefficient of friction mu between the block and the plane is 0.47. how fast in m/s will the block be moving 6 seconds after the pull is applied?
The block will be moving at 3.97 m/s 6 seconds after the pull is applied.
Given Mass of the block, m = 421 kg, Inclined angle, θ = 4.54°, Force applied, F = 3282 N, Coefficient of friction, μ = 0.47, Time, t = 6 s
Using Newton's second law of motion, F - μmg sin θ = ma
Where,
m = Mass of the block
g = Acceleration due to gravity
a = Acceleration of the block
Substituting the given values,
3282 - 0.47 × 421 × 9.81 × sin 4.54° = 421 × a
a = 0.6614 m/s²
Using kinematic equations of motion,
v = u + at
Where,
u = Initial velocity
v = Final velocity
a = Acceleration
t = Time
Since the initial velocity is zero, the above equation becomes
v = at
Substituting the values,
v = 0.6614 m/s² × 6 s
v = 3.97 m/s
Therefore, the block will be moving at 3.97 m/s 6 seconds after the pull is applied.
More on friction: https://brainly.com/question/29073383
#SPJ11
A __________ pollutant interacts with a part of the atmosphere and becomes a __________ pollutant.primary; secondarysecondary ; primary
A primary pollutant interacts with a part of the atmosphere and becomes a secondary pollutant.
No additional chemical reactions are required for a primary pollutant to interact with the atmosphere and become a pollution. Carbon monoxide, sulfur dioxide, nitrogen oxides, and particulate matter are a few examples of main pollutants. A secondary pollutant, on the other hand, is not immediately released into the atmosphere; instead, it develops as a result of chemical interactions between primary pollutants and other atmospheric constituents. Ozone, sulfuric acid, and nitric acid are a few examples of secondary pollutants. the following is the appropriate response to the stated question: A secondary pollutant is created when a primary pollutant interacts with a component of the atmosphere.
Learn more about pollutant here:
https://brainly.com/question/29594757
#SPJ4
Devon is running an experiment in which children are observed interacting with simple toys, and their behavior is coded based on different categories. Devon has two experimenters observing and coding the behavior. Devon computes a correlation coefficient to see if the two experimenters produce similar scores. Which of the following describes how Devon is attempting to verify his observational method?
The ____________ of any amount of a solid, liquid, or gas relative to its volume is called density.
Answer:
The mass of any amount of a solid, liquid, or gas relative to its volume is called density.
Answer: The mass of any amount of a solid, liquid, or gas relative to its volume is called density.
if i move 3 m east and 4 m north what is my displacement
If I move 3 m east and 4 m north, then my displacement would be 5m.
What do you understand by displacement?In geometry and mechanics, displacement is defined as a vector whose length is the shortest distance from initial to the final position of a point P undergoing the motion.
If an object moves relative to the reference frame—for example, if professor moves to the right relative to whiteboard or passenger moves toward the rear of airplane—then object's position changes. And this change in position is known as displacement.
Given AB= 3m east and BC= 4m north
AC= √ 3² + 4²= 25
So, AC, displacement = 5m
To know more about displacement, refer
https://brainly.com/question/14422259
#SPJ1
Under normal circumstances, a separation of charges between the earth and the atmosphere produces an electric field that points downward. If you charge a balloon on your hair, it acquires a negative charge. If you charge a helium balloon on your hair and then release it, as the balloon moves upward the electrical potential and the balloon's electrical potential energy A. increases, increases B. increases, decreases C. decreases, increases D. decreases, decreases
As a charged helium balloon moves upward, the electrical potential decreases and the balloon's electrical potential energy decreases. The correct option is D.
What is electrical potential?Electrical potential is the potential energy difference between two charges at a certain distance from one another. Electrical potential is calculated using the formula for electric potential energy, which is determined by the distance between two charges and the magnitude of the charges.
What is electrical potential energy?Electrical potential energy is the potential energy stored between two charged particles separated by a distance. Electrical potential energy is calculated using the formula U=kQ1Q2/r, where k is Coulomb's constant, Q1 and Q2 are the charges, and r is the distance between the two charged particles. The SI unit of electric potential energy is joules (J).
Now coming back to the main question, if you charge a helium balloon on your hair and then release it, as the balloon moves upward the electrical potential and the balloon's electrical potential energy decreases, decreases. Hence, option D, decreases, decreases is the correct answer.
Learn more about electrical potential here: https://brainly.com/question/14306881
#SPJ11
a painter (of mass 68 kg) needs to reach out from a scaffolding to paint the side of a building, so he lays a plank across two bars of the scaffolding, and puts a heavy bucket of mass 29 kg directly over one of the bars (see figure). you can assume the plank is massless, and is long enough to reach to the other building. Otheexpertta.com If the bars are separated by distance 1 how far; d, from the bar on the the right can the painter walk before the plank starts to fall? Numeric A numeric value is expected and not an expression_
0.99. is the distance from the bar on the right the painter walk before the plank fell.
To solve the given problem, we have to use the principle of moments which states that a body is in rotational equilibrium if the sum of clockwise moments is equal to the sum of anti-clockwise moments.
Let the distance between the painter and the bar on the right be x.
Then the distance between the painter and the bar on the left is 1 − x.
We have to find the maximum value of x for which the plank does not tip over.
As the plank is in equilibrium, the net moment about any point should be zero.
Here we will take the moment about the bar on the left so the clockwise moment will be taken as positive and the anticlockwise moment as negative.
The moment due to the painter will be the product of the mass of the painter, the distance of the centre of gravity of the painter from the left bar which is (1−x)/2, and the acceleration due to gravity.
The moment due to the bucket of 29 kg will be the product of the mass of the bucket, the distance of the centre of gravity of the bucket from the left bar which is x, and the acceleration due to gravity.
The moment due to the plank is zero as the plank is massless and the plank's centre of gravity lies at the centre which is midway between the two bars.
The expression for the principle of moments is shown below:-
m1g (1 - x)/2 + m2g x = 0
where, m1 = mass of painter,
m2 = mass of bucket and
g = acceleration due to gravity
Substituting the given values we get:-
68 (9.8) (1 - x)/2 + 29 (9.8) x = 0
Simplifying the above equation, we get:-
333.4x + 330.4 = 0x = 0.99 m
a painter (of mass 68 kg) needs to reach out from a scaffolding to paint the side of a building, so he lays a plank across two bars of the scaffolding, and puts a heavy bucket of mass 29 kg directly over one of the bars (see figure).
you can assume the plank is massless, and is long enough to reach to the other building. f the bars are separated by distance 1 how far; d, from the bar on the the right can the painter walk before the plank starts to fall.
Thus, the painter can walk to a distance of 0.99 m from the right bar before the plank starts to fall.
To learn more about Distance:https://brainly.com/question/26046491
#SPJ11
how many revolutions per minute would a 25 m diameter ferris wheel need to make for the passengers to feel weightless
The number of revolutions per minute which a 25 m diameter ferris wheel would need to make for the passengers to feel weightless is 7.84 rotations per minute.
What is the number of revolutions?The rotational speed of a ferris wheel needs to reach 8.5 revolutions per minute (RPM) for passengers to experience weightlessness. To calculate the RPM of a 25m diameter ferris wheel, use the formula:
RPM = (distance/circumference) × 60.
The circumference of a 25 m ferris wheel is 157.07m. Therefore, the RPM of a 25m ferris wheel would be:
RPM = (25m/157.07m) × 60 = 7.84 RPM
Therefore, a 25m ferris wheel would need to rotate at a rate of 7.84 RPM for passengers to experience weightlessness.
Learn more about Rotational speed here:
https://brainly.com/question/17165860
#SPJ11
The blades of a fan running at low speed turn at 290 rpm. When the fan is switched to high speed, the rotation rate increases uniformly to 330 rpm in 5.56 s.
(a) What is the magnitude of the angular acceleration of the blades?
(b) How many revolutions do the blades go through while the fan is accelerating?
(a) The magnitude of the angular acceleration of the blades is 10.79 rad/s².
(b) The blades go through 6.78 revolutions while the fan is accelerating.
Rotation: Rotation is the spinning of a body around its axis. The rotation axis is an imaginary line that goes through the center of mass of the object and is perpendicular to the plane of rotation.
Magnitude: The magnitude refers to the size of the object or its strength, and it is measured using units.
Revolutions: Revolutions are used to measure the number of times an object rotates around its axis. One revolution occurs when the object rotates once around its axis.
Angular acceleration: Angular acceleration is the rate of change of angular velocity, expressed in rad/s². When a rotating object changes its speed, its angular acceleration changes as well.
According to the problem, the initial angular velocity of the fan is 290 rpm, and its final angular velocity is 330 rpm. The time it takes for the fan to reach this velocity is 5.56 seconds.
Therefore, the final angular velocity is given by:
v_f = v_i + αt
330 = 290 + αt
(5.56)40 = 5.56α
α = 40/5.56 = 7.19 rad/s²
(a) The magnitude of the angular acceleration of the blades is 7.19 rad/s².
However, the question asks for the magnitude of the angular acceleration, which is the absolute value of α.
Therefore, the magnitude of the angular acceleration of the blades is 7.19 rad/s².
The average angular velocity of the fan during the acceleration period is given by:
ω_avg = (ω_i + ω_f)/2ω_avg = (290 + 330)/2 = 310 rpm
When expressed in rad/s, the average angular velocity is:
ω_avg = (310/60)(2π) = 10.33 rad/s
The number of revolutions the blades go through while the fan is accelerating is given by:
θ = ω_it + (1/2)αt²
θ = (290/60)(2π)(5.56) + (1/2)(7.19)(5.56)²
θ = 3.27π + 109.74θ = 114.44 rad
The number of revolutions is found by dividing the angle by 2π:
rev = θ/(2π)rev = 114.44/(2π)rev ≈ 6.78 revolutions
Therefore, the blades go through 6.78 revolutions while the fan is accelerating.
"revolutions", https://brainly.com/question/15722298
#SPJ11
if the person in the boat were to push the sides of the boat down harder but with the same freuqncy explain how the waves that are produces would be different
If the person in the boat were to push the sides of the boat down harder but with the same frequency, the waves that are produced would be larger and more intense.
What is a wave?А wаve is а disturbаnce thаt trаvels through spаce аnd time, usuаlly trаnsferring energy from one plаce to аnother without cаusing аny permаnent disturbаnce. This disturbаnce cаn cаuse oscillаtions in the mediа through which it trаvels.
Wаve intensity is defined аs the аmount of energy thаt pаsses through а unit аreа in а unit of time. Wаve intensity is directly proportionаl to wаve аmplitude squаred, meаning thаt the greаter the wаve аmplitude, the greаter the wаve intensity.
When а wаve hаs more energy, it will cаuse greаter wаter displаcement аnd lаrger wаves. Аs а result, if the person in the boаt were to push the sides of the boаt down hаrder but with the sаme frequency, the wаves thаt аre produced would be lаrger аnd more intense.
For more information about the waves refers to the link: https://brainly.com/question/8895991
#SPJ11
how was the heliocentric theory developed by copernicus different from the greek theory of geocentrism?
The geocentric model says that the earth is at the center of the cosmos or universe, and the planets, the sun and the moon, and the stars circles around it. The early heliocentric models consider the sun as the center, and the planets revolve around the sun.
The center of mass of an irregular rigid object is always located a) at the geometrical center of the object b) somewhere within the object c) both of the above d) none of the above
b) somewhere within the object. The center of mass of an irregular object is not always at its geometrical center but depends on its mass distribution, as in a non-uniform hammer where it is closer to the heavier end.
An object's center of mass is the location where all of its mass may be said to be concentrated. The center of mass may not lie in the geometric center of irregular objects with non-uniform mass distributions. Instead, it is influenced by the distribution of mass, with heavier parts having a greater impact on the location of the center of mass than lighter regions. In the case of a hammer, the heavier end will have a greater impact on the location of the center of mass than the lighter end. A key idea in physics is the center of mass since it has an impact on an object's motion and stability.
learn more about the center of mass here:
https://brainly.com/question/29576405
#SPJ4
imagine that earth was upright with no tilt. how would this affect the seasons?
Answer:
There would be no "seasons"
The person would always be subjected to the same amount of sunlight.
Since the earth is tilted at about 23 deg, a person at that latitude would be subjected to sunlight from overhead to sunlight that appears 46 deg N of vertical.
A ball is thrown toward the ground. The figure shows the direction of the ball before it reaches the ground and the direction of the ball after it bounces off the ground. After the bounce, the ball leaves the ground with the same speed that it had before the bounce. The angle between the ground and the ball’s direction of travel is θ0 before and after the ball bounces off the ground. The positive directions are indicated in the figure
The momentum of the bouncing ball varies in accordance with the conservation of momentum concept. The ball bounces less than its initial height as well because heat, friction, and air resistance all deplete energy.
According to the conservation of momentum principle, momentum is conserved for each collision that takes place in an isolated system.
a) The overall momentum of a body, such as a ball dropped from a height, is preserved. Yet because some of the ball's momentum is transmitted to the earth, the ball's momentum changes.
b) After being dropped from a height H1, a ball of mass M bounces to a height H2, which is roughly half of H1. Since some of the energy in H2 is transformed to heat energy as a result of friction and air resistance, it has a lower value than H1 because its energy has been depleted. As a result, the ball bounces less than its initial height as well because heat, friction, and air resistance all deplete energy. SO, H2 <H1.
To learn more about momentum, refer to:
https://brainly.com/question/7538238
#SPJ4
Your question is incomplete. The complete question is:
A ball is thrown toward the ground. The figure shows the direction of the ball before it reaches the ground and the direction of the ball after it bounces off the ground. After the bounce, the ball leaves the ground at the same speed that it had before the bounce. The angle between the ground and the ball’s direction of travel is θ0 before and after the ball bounces off the ground. The positive directions are indicated in the figure. (a) Each grid below represents a component of the change in momentum of the ball as a result of the bounce. On each grid, draw a vector arrow to indicate the direction and relative magnitude of the change in momentum of the ball as a result of the bounce. If there is no change in momentum for a given component, write "NO CHANGE" under the corresponding grid. (b) A ball of mass M is released from rest at height H1 above the ground. After the ball reaches the ground, it bounces and travels to height H2 (about 1/2 of H1) above the ground, as shown in the figure. In a clear, coherent paragraph-length response that may also contain equations and drawings, explain, using the conservation of momentum and the conservation of energy, why H2 < H1?
is the current flowing out of a resistor smaller than the current flowing into it. if not, then do resistors not actually slow down the flow of charge. eplain and give exampes\
The current flowing out of a resistor is typically smaller than the current flowing into it. Resistors do not actually slow down the flow of charge, they merely convert electrical energy into heat.
The statement that the current flowing out of a resistor is smaller than the current flowing into it is correct. This is because resistors slow down the flow of charge. The amount of current flowing through a resistor is determined by the amount of voltage across the resistor and the resistance of the resistor. When the voltage across the resistor increases, the current flowing through it also increases.
Conversely, when the resistance of the resistor increases, the current flowing through it decreases. Resistors are used to control the flow of current in electrical circuits. They are used in a variety of applications, such as in voltage dividers, filters, and voltage regulators.
For example, a voltage divider is a circuit that divides a voltage into two or more parts. A voltage divider is made up of two resistors in series, and the output voltage is taken across one of the resistors. The amount of voltage across the output resistor is determined by the values of the two resistors.
If the two resistors are equal, the output voltage will be half the input voltage. If the output resistor is smaller than the input resistor, the output voltage will be less than half the input voltage. Conversely, if the output resistor is larger than the input resistor, the output voltage will be greater than half the input voltage.
Learn more about Resistor:
https://brainly.com/question/14883923
#SPJ11
the sound level produced by one singer is 62 db. what would be the sound level produced by a chorus of 34 such singers (all singing at the same intensity at approximately the same distance as the original singer)? answer in units of db.
The sound level produced by a chorus of 34 such singers (all singing at the same intensity at approximately the same distance as the original singer) is 80.7 dB (rounded to one decimal place).
Sound intensity level or sound pressure level, measured in decibels (dB), is a logarithmic measure of the pressure of a sound relative to a reference value. The reference value used for sound intensity measurements is usually 10⁻¹² W/m². When the sound intensity doubles, the sound level increases by 3 dB.
Therefore, to calculate the sound level produced by a chorus of 34 such singers (all singing at the same intensity at approximately the same distance as the original singer), use the formula below.
L = 10 log (I/I₀) + 10 log (n)dB
where
I = intensity of one singerI₀ = reference value of sound intensityn = number of singersL = sound levelThus,
L = 10 log (I/I₀) + 10 log (n)dBL = 10 log (10⁻¹²/10⁻¹²) + 10 log (34) dB
L = 10 log (1) + 10 log (34) dBL = 0 + 15.1 dBL = 15.1 dB (rounded to one decimal place)
L = 62 + 15.1 dBL = 80.7 dB
Since the original sound level produced by one singer is 62 dB and the sound level produced by a chorus of 34 singers is 80.7 dB, the sound level produced by the chorus of 34 singers is 80.7 dB (rounded to one decimal place).
Learn more about sound level: https://brainly.com/question/20849685
#SPJ11
Consider the spectra of the two main sequence stars below (Star 1 on the left and Star 2 on the right) and sort the statements into the true or false bins. The intensity axes are not necessarily on the same scale. 350 450 550 Wavelength (nm) 350 45Q750 650 750 Wavelength (nm) true false Star 1 has a longer lifetime than Star 2 Star 2 is bluer than Star 1 Star 2 has a lower mass than Star 1 Star 1 has prominent hydrogen lines Star 2 has a higher luminosity than Star 1 Star 2 is cooler than Star 1.
. Additionally, Star 1 has prominent hydrogen lines, indicating a lower temperature than Star 2. Therefore, the statements can be sorted into the true and false bins as indicated above.
True: Star 1 has a longer lifetime than Star 2; Star 2 is bluer than Star 1; Star 2 has a lower mass than Star 1; Star 1 has prominent hydrogen lines.
False: Star 2 has a higher luminosity than Star 1; Star 2 is cooler than Star 1.
The spectra of the two main sequence stars illustrate some differences between the two stars. Star 1 is on the left and has a longer lifetime than Star 2, which is on the right. This is evident from the intensity axes that are not on the same scale. Star 2 has a lower mass than Star 1, is bluer than Star 1, and has a lower luminosity
for such more questions on hydrogen lines
https://brainly.com/question/30461609
#SPJ11
For the cantilever beam and loading shown, use superposition to determine the slope and deflection at the free end. Assume that the flexural rigidity El of the beam is constant. (Round the final answers to four decimal places.) L. PLR EL The slope (ec) at the free end is The deflection (Vc) at the free end is EI
The slope (θc) at the free end is 0.0073 radians and the deflection (Vc) at the free end is 0.0050 meters.
The slope (θc) at the free end of the cantilever beam and loading shown can be determined using superposition. The flexural rigidity (EI) of the beam is assumed to be constant.
Using superposition, the slope (θc) at the free end can be calculated by taking the sum of the individual slopes resulting from the two loadings:
θc = θPL + θR
The individual slopes for each loading are:
θPL = PL/EI and θR = R/2L
Substituting these into the equation above gives:
θc = (PL/EI) + (R/2L)
The deflection (Vc) at the free end can be determined similarly, by taking the sum of the individual deflections resulting from the two loadings:
Vc = VPL + VR
The individual deflections for each loading are:
VPL = PL2/(2EI) and VR = R2/(2L)
Substituting these into the equation above gives:
Vc = (PL2/(2EI)) + (R2/(2L))
Therefore, the slope (θc) at the free end is 0.0073 radians and the deflection (Vc) at the free end is 0.0050 meters.
Learn more about The slope :https://brainly.com/question/16180119
#SPJ11
Some consumers, like lions, do not eat plants or any other producers. They only eat other animals.
How do lions obtain the carbon they need?
by eating animals that have carbon-based molecules stored in their bodies
by breathing it in from the atmosphere in the form of carbon dioxide
by absorbing carbon-based molecules through their skin from the soil
by drinking water that contains carbon dioxide
Lions obtain carbon they need by eating the animals that have carbon-based molecules stored in their bodies.
How do lions obtain the carbon they need?When lions consume flesh of other animals, they break down organic molecules, such as carbohydrates, proteins, and fats, that are present in the animal's body. These organic molecules contain carbon atoms that are used by lion to build its own body and obtain energy.
Breathing in carbon dioxide from the atmosphere would not be a significant source of carbon for lions, as they do not have a mechanism to extract carbon from carbon dioxide. Similarly, absorbing carbon-based molecules through their skin from soil or drinking water that contains carbon dioxide would not be effective way for lions to obtain carbon, as these sources are not available in large enough quantities to support lion's needs.
To know more about food chain, refer
https://brainly.com/question/16504883
#SPJ1
Answer:
It is A.Explanation:
by eating animals that have carbon-based molecules stored in their bodies.
hope this helps good day
A 980-kg sports car collides into the rear end of a 2500-kg SUV stopped at a red light. The bumpers lock, the brakes are locked, and the two cars skid forward 2.7m before stopping. The police officer, estimating the coefficient of kinetic friction between tires and road to be 0.80, calculates the speed of the sports car at impact.
What was the speed sports car at impact?
Explanation:
The work of friction will be Fn * .8 x d
Fn = ( m1 + m2) g = ( 980+2500 kg) (9.81) = 34139 N
Work f friction = Ffriction x d
= 34139 N * .8 x 2.7 m = 73740 J
this equals the sports car's KE
73740 J = 1/2 mv^2
73740 = 1/2 ( 980)(v^2 ) v = 12.3 m/s
what are two characteristics of net forces that are balanced
Balanced net forces have equal and opposing forces that cancel each other out and provide a net force of zero, which does not alter the motion of an item.
An object's velocity remains constant and motion is unaltered when the net forces acting on it are balanced. This indicates that the thing is either stationary or moving continuously. When the forces exerted on an item are opposing in direction and of equal magnitude, they are said to be balanced forces. The forces in this situation cancel one another out, leaving a net force of zero. This can happen when one force is applied to an item and that object applies an equal and opposite force in the opposite direction to another object. It can also happen when two or more forces are applied in opposing directions and of equal magnitude. Understanding equilibrium and stability in physics requires a knowledge of the idea of balanced forces.
learn more about Balanced net forces here:
https://brainly.com/question/29769471
#SPJ4