A niobium alloy is produced by introducing tungsten substitutional atoms into the BCC structure; eventually an alloy is produced that has a lattice parameter of 0.32554 nm and a density of 11.95 g/cm3. Calculate the fraction of the atoms in the alloy that are tungsten.

Answers

Answer 1

To calculate the fraction of the atoms in the niobium alloy that are tungsten, we need to use the concept of lattice parameter and density.

The atomic radii of niobium and tungsten are different, which affects the lattice parameter. The substitution of tungsten atoms into a niobium lattice would cause an increase in the lattice parameter. This increase is related to the concentration of tungsten atoms in the alloy.

The relationship between lattice parameter and atomic radius can be described as:

a = 2^(1/2) * r

where a is the lattice parameter and r is the atomic radius.

Using the given lattice parameter of 0.32554 nm, we can calculate the atomic radius of the niobium-tungsten alloy as:

r = a / (2^(1/2)) = 0.2299 nm

The density of the alloy is given as 11.95 g/cm3. We can use this density and the atomic weight of niobium and tungsten to calculate the average atomic weight of the alloy as:

density = (mass / volume) = (n * A) / V

where n is the number of atoms, A is the average atomic weight, and V is the volume occupied by n atoms.

Rearranging the equation gives:

A = (density * V) / n

Assuming that the niobium-tungsten alloy contains only niobium and tungsten atoms, we can write:

A = (density * V) / (x * Na * Vc) + ((1 - x) * Nb * Vc))

where x is the fraction of atoms that are tungsten, Na is Avogadro's number, Vc is the volume of the unit cell, and Nb is the atomic weight of niobium.

We can simplify the equation by substituting the expression for Vc in terms of the lattice parameter a:

Vc = a^3 / 2

Substituting the given values, we get:

A = (11.95 g/cm3 * (0.32554 nm)^3 / (x * 6.022 × 10^23 * (0.2299 nm)^3)) + ((1 - x) * 92.91 g/mol * (0.32554 nm)^3 / 2)

Simplifying and solving for x, we get:

x = 0.0526 or 5.26%

Therefore, the fraction of atoms in the niobium-tungsten alloy that are tungsten is 5.26%.

For more details regarding alloy, visit:

https://brainly.com/question/1759694

#SPJ1


Related Questions

In general, what is the minimum size of the Layer 2 Ethernet Frame in bytes? What is/are the maximum size(s)?

Answers

An Ethernet frame is a unit of data transmitted between devices in a computer network. It consists of a header and a payload, which contains the actual data. The header includes source and destination MAC addresses, length, and error detection information.

The minimum size of a Layer 2 Ethernet Frame is 64 bytes, which ensures proper collision detection. The maximum size can be 1,518 bytes for a standard Ethernet frame or up to 9,000 bytes for a jumbo frame.

Ethernet frames consist of multiple fields such as Preamble, Start Frame Delimiter, Destination and Source MAC addresses, EtherType or Length field, Payload, and Frame Check Sequence. The minimum frame size of 64 bytes is required to maintain the Ethernet network's efficiency and guarantee proper functionality.

In conclusion, the minimum size of a Layer 2 Ethernet Frame is 64 bytes, while the maximum size is typically 1,518 bytes for standard frames or up to 9,000 bytes for jumbo frames. These sizes help ensure efficient network operation and accurate collision detection.

To know more about Ethernet Frame visit:

https://brainly.com/question/22862403

#SPJ11

The bandwidth of an amplifier is A) the range of frequencies between the lower and upper 3 dB frequencies B) the range of frequencies found using f2 -f1 C) the range of frequencies over which gain remains relatively constant D) All of the above

Answers

The bandwidth of an amplifier refers to the range of frequencies over which the amplifier effectively amplifies the input signal. Here, the correct answer is D) All of the above.

The bandwidth can be defined as the range of frequencies between the lower and upper 3 dB frequencies (A). These frequencies are where the gain has dropped by 3 dB compared to the maximum gain, indicating that the amplifier's performance has decreased by half its maximum power.

Additionally, the bandwidth can be calculated by subtracting the lower frequency from the higher frequency  in the operational range (B). This mathematical difference provides a measure of the range within which the amplifier functions effectively.

Lastly, the bandwidth also refers to the range of frequencies over which the gain remains relatively constant (C). Within this range, the amplifier can maintain its performance and provide a stable output for the input signals it receives.

Learn more about amplifier gain here:

https://brainly.com/question/31086456

#SPJ11

The signal s(t) is transmitted through an adaptive delta modulation scheme Consider a delta modulation scheme that samples the signal s(t) every 0.2 sec to create s(k). The quantizer sends e(k to the channel if the input s(k) is higher than the output of the integrator z(k), and e(k)--1 otherwise .

Answers

The signal s(t) is transmitted through an adaptive delta modulation scheme, where s(k) is created by sampling the signal every 0.2 sec. The quantizer sends e(k) to the channel depending on whether s(k) is higher or lower than the output of the integrator z(k).

Delta modulation is a type of pulse modulation where the difference between consecutive samples is quantized and transmitted. In adaptive delta modulation, the quantization step size is adjusted based on the input signal. This allows for better signal quality and more efficient use of bandwidth.

In this specific scheme, the signal s(t) is sampled every 0.2 sec to create s(k). The quantizer then compares s(k) to the output of the integrator z(k), which is a weighted sum of the previous inputs and quantization errors. If s(k) is higher than z(k), e(k) is sent to the channel. Otherwise, e(k) is subtracted by 1 and then sent to the channel.

To know more about quantizer visit:-

https://brainly.com/question/14805981

#SPJ11

17. A town generates 1,000 m d' of wastewater with a COD of 192 mg L. Given the growth parameters below, what value of S and 8 are needed to maintain a MLVSS concentration of 2,500 mg L- in a completely mixed activated sludge process if o. is 6 d? (0.56 mg/L, 0.15 di Growth constants Ks (mg/L) kd (d-1) 10.00 0.1 5.0 0.40 um (d-1) Y(mg/mp)

Answers

To maintain a MLVSS concentration of 2,500 mg/L in a completely mixed activated sludge process, the required substrate concentration (S) is approximately 86.81 mg/L.

MLVSS concentration requirement?

To calculate the required values of S and θ (theta) for maintaining a MLVSS (Mixed Liquor Volatile Suspended Solids) concentration of 2,500 mg/L in a completely mixed activated sludge process, we can use the Monod equation and the biomass yield equation.

The Monod equation relates the specific growth rate (μ) of microorganisms to the substrate concentration (S), the maximum specific growth rate (μm), and the half-saturation constant (Ks):

μ = μ[tex]m * (S / (Ks + S))[/tex]

The biomass yield equation relates the biomass production rate (Y) to the specific growth rate (μ) and the substrate consumption rate:

[tex]Y = (X / S) * (dS / dt)[/tex]

Given the growth parameters:

μm = [tex]0.56 mg/L[/tex]

Ks = 0.56 mg/L[tex]0.56 mg/L[/tex]

kd = [tex]0.1 d^(-1)[/tex]

um = [tex]5.0 d^(-1)[/tex]

Y = [tex]0.15 mg/mg[/tex]

We'll assume that MLVSS concentration (X) is equal to the MLSS (Mixed Liquor Suspended Solids) concentration.

First, let's calculate the maximum specific growth rate (μm) based on the given maximum specific growth rate coefficient (um) and the decay rate constant (kd):

μm = um - kd

[tex]= 5.0 d^(-1) - 0.1 d^(-1[/tex])

=[tex]4.9 d^(-1)[/tex]

Now, we can calculate the required substrate concentration (S) using the biomass yield equation:

Y = [tex](X / S) * (dS / dt)[/tex]

[tex]0.15 mg/mg = (2500 mg/L) / S * dS / dt[/tex]

Since dS / dt is the wastewater flow rate (Q) divided by the wastewater concentration (COD), we have:

[tex]0.15 = (2500) / S * Q / COD[/tex]

[tex]0.15 = (2500) / S * Q / COD[/tex]

We know that the wastewater flow rate (Q) is 1000 m^3/d and the wastewater COD is 192 mg/L. Substituting these values:

0.15 = (2500) / S * (1000 m^3/d) / (192 mg/L)

To simplify the units, we convert the flow rate to L/d and the COD to m[tex]g/m^3:[/tex]

[tex]0.15 = (2500) / S * (1000000 L/d) / (192000 mg/m^3)[/tex]

[tex]0.15 = 13.020833 / S[/tex]

Now, we can solve for S:

[tex]0.15 = 13.020833 / S[/tex]

[tex]S = 86.805556 mg/L[/tex]

So, the required substrate concentration (S) is approximately 86.81 mg/L.

Next, we can calculate the hydraulic retention time (θ) using the formula:

θ = 1 / (Q / V)

Where Q is the wastewater flow rate and V is the reactor volume.

Given that Q = 1000 m^3/d and the volume V is unknown, we need more information to calculate θ and determine the reactor volume required to maintain the desired MLVSS concentration.

Learn more about MLVSS

brainly.com/question/29891312

#SPJ11

a single-phase transformer is rated 10 kva, 7,200/120 v, 60 hz. the following test data was performed on this transformer:

Answers

The statement provides information about a single-phase transformer's rating, voltage specifications, frequency, and mentions the performance test data without specifying the details.

What information does the given statement provide about a single-phase transformer?

The given statement provides information about a single-phase transformer that is rated at 10 kVA and has a primary voltage of 7,200 V and a secondary voltage of 120 V, operating at a frequency of 60 Hz.

It mentions that certain test data was performed on this transformer, but the specific details of the test data are not provided.

The test data could include measurements of parameters such as winding resistances, impedance, voltage regulation, efficiency, or other performance characteristics of the transformer.

Without the specific test data, it is not possible to provide further explanation or analysis.

Learn more about single-phase transformer's

brainly.com/question/27907429

#SPJ11

ased on your experience in this lab, summarize the effects of independently increasing the proportional and integral gains on overshoot, steady-state error, and system oscillations.

Answers

Based on my experience in this lab, independently increasing the proportional and integral gains has varying effects on overshoot, steady-state error, and system oscillations. Increasing the proportional gain generally results in a reduction in steady-state error and a faster response time, but also leads to an increase in overshoot and potentially unstable system oscillations.

On the other hand, increasing the integral gain reduces steady-state error and overshoot but can also lead to system oscillations and instability.It is important to note that the effects of increasing these gains are highly dependent on the specific system being controlled and the values of the gains themselves. Finding the optimal values for each gain requires careful tuning and testing to ensure stable and efficient control.Overall, it is important to balance the benefits of reducing steady-state error and improving response time with the potential drawbacks of increased overshoot and instability when increasing these gains. Careful testing and tuning can help ensure that the system is operating optimally and producing the desired results.

For such more question on instability

https://brainly.com/question/2731458

#SPJ11

In control theory, proportional and integral gains are the two parameters used to adjust the behavior of a control system.

Increasing the proportional gain makes the system more responsive to errors, while increasing the integral gain reduces steady-state errors.

However, changing these parameters can also have unintended consequences on the system's behavior.

Here are some effects of independently increasing the proportional and integral gains on overshoot, steady-state error, and system oscillations:

Proportional gain (Kp): Increasing the proportional gain makes the system more responsive to errors, leading to faster convergence and smaller steady-state errors. However, increasing Kp also increases the overshoot, which is the extent to which the system overshoots the set point before reaching steady-state. Furthermore, high values of Kp can lead to oscillations and instability in the system.

Integral gain (Ki): Increasing the integral gain reduces steady-state errors by integrating the error over time, effectively eliminating any constant error. However, increasing Ki also increases the response time of the system, leading to slower convergence. Additionally, high values of Ki can lead to overshoot and oscillations, especially in systems with high saturation or nonlinearities.

In summary, increasing Kp improves the system's response time and reduces steady-state error, but at the expense of increased overshoot and instability. Increasing Ki reduces steady-state error and eliminates constant error, but at the expense of slower response time and increased overshoot and oscillations. Balancing the proportional and integral gains is important to achieve optimal system performance, and often requires tuning through experimentation and testing.

Learn more about integral here:

https://brainly.com/question/18125359

#SPJ11

Problem 2 Give an example set of denominations of coins so that a greedy change making algo- rithm will not use the minimum number of coins. Give an instance, show the output of the greedy algorithm on this instance, and show better output

Answers

Thus, the greedy algorithm results in using 4 coins, while a more optimal solution only requires 2 coins.

A greedy change making algorithm is one that always selects the largest coin denomination that is less than or equal to the amount of change due, until the amount of change due is zero. However, in some cases, this algorithm may not always result in the minimum number of coins being used.

Here's an example of a coin denomination set and an instance where a greedy change-making algorithm does not result in the minimum number of coins:

Denomination set: {1, 4, 5}
Instance: 8

Greedy algorithm output:
1. Choose the largest coin (5), remaining amount: 8 - 5 = 3
2. Choose the largest coin (1), remaining amount: 3 - 1 = 2
3. Choose the largest coin (1), remaining amount: 2 - 1 = 1
4. Choose the largest coin (1), remaining amount: 1 - 1 = 0
Result: 5, 1, 1, 1 (4 coins)

Better output:
1. Choose the second-largest coin (4), remaining amount: 8 - 4 = 4
2. Choose the second-largest coin (4), remaining amount: 4 - 4 = 0
Result: 4, 4 (2 coins)

In this case, the greedy algorithm results in using 4 coins, while a more optimal solution only requires 2 coins.

Know more about the greedy algorithm

https://brainly.com/question/29243391

#SPJ11

air at 1 atmosphere and flows in a 3 centimeter diameter pipe. the maximum velocity of air to keep the flow laminar is

Answers

The maximum velocity of air to keep the flow laminar is approximately 0.44 m/s.

What is the maximum velocity of air?

The maximum velocity of air to maintain laminar flow in a pipe can be determined using the concept of the critical Reynolds number. For flow in a pipe, the critical Reynolds number for the transition from laminar to turbulent flow is typically around 2,300.

The Reynolds number (Re) is calculated using the formula Re = (ρVD)/μ, where ρ is the density of air, V is the velocity, D is the diameter of the pipe, and μ is the dynamic viscosity of air.

By rearranging the formula and substituting the known values (ρ = 1.2 kg/m³, D = 0.03 m, μ = 1.8 × 10 ⁻⁵kg/(m·s)), we can solve for the maximum velocity to be approximately 0.44 m/s.

Learn more about velocity

brainly.com/question/30559316

#SPJ11

In this phase of the systems life cycle, the new information system is installed and adapted to the new system, and people are trained to use it. A. Systems implementation
B. Systems analysis
C. Systems design
D. Systems development

Answers

In Systems implementation phase of the systems life cycle, the new information system is installed and adapted to the new system, and people are trained to use it

So, the correct answer is A.

This phase is crucial in ensuring the successful deployment of a new information system. During this stage, the system is installed, configured, and customized to meet the organization's needs.

The implementation process involves testing, data conversion, and system integration. Additionally, training programs are provided to users to help them adapt to the new system and utilize its features effectively.

The implementation phase requires a coordinated effort between the project team, end-users, and other stakeholders to ensure that the system is functional, reliable, and meets the desired requirements.

Hence, the answer of the question is A

Learn more about system implementation at

https://brainly.com/question/24258126

#SPJ11

while organizing a storage cabinet, a technician discovers a box of hard drives that are incompatible with current hardware and may contain sensitive of the following is the

Answers

The technician should handle the discovery of incompatible hard drives containing potentially sensitive data by following established protocols for data security and disposal.

What should the technician do with incompatible hard drives containing sensitive data?

When a technician comes across a box of hard drives that are incompatible with the current hardware and may contain sensitive data, it is crucial to handle the situation with care. The first step is to adhere to established protocols for data security and privacy. This may involve isolating the hard drives and limiting access to authorized personnel only.

Next, the technician should consult with the appropriate stakeholders, such as IT personnel or data security experts, to determine the best course of action. It may involve securely erasing the data on the hard drives using specialized software or physically destroying the drives to ensure data confidentiality.

The importance of data security protocols and the proper handling of incompatible hardware to protect sensitive information from unauthorized access and potential breaches.

Learn more about incompatible

brainly.com/question/31459443

#SPJ11

Given a list of unique elements, a permutation of the list is a reordering of the elements. For example, [2, 1, 3], [1, 3, 2], and [3, 2, 1] are all permutations of the list [1, 2, 3].
Implement permutations, a generator function that takes in a lst and outputs all permutations of lst, each as a list (see doctest for an example). The order in which you generate permutations is irrelevant.
Hint: If you had the permutations of lst minus one element, how could you use that to generate the permutations of the full lst?
Note that in the provided code, the return statement acts like a raise StopIteration. The point of this is so that the returned generator doesn't enter the rest of the body on any calls to next after the first if the input list is empty. Note that this return statement does not affect the fact that the function will still return a generator object because the body contains yield statements.
def permutations(lst):
"""Generates all permutations of sequence LST. Each permutation is a
list of the elements in LST in a different order.
The order of the permutations does not matter.
>>> sorted(permutations([1, 2, 3]))
[[1, 2, 3], [1, 3, 2], [2, 1, 3], [2, 3, 1], [3, 1, 2], [3, 2, 1]]
>>> type(permutations([1, 2, 3]))

>>> sorted(permutations((10, 20, 30)))
[[10, 20, 30], [10, 30, 20], [20, 10, 30], [20, 30, 10], [30, 10, 20], [30, 20, 10]]
>>> sorted(permutations("ab"))
[['a', 'b'], ['b', 'a']]
"""
if not lst:
yield []
return.

Answers

To implement the permutations function, we can start by checking if the input list is empty. If it is, we yield an empty list. If the list has only one element, we yield a list containing that element.

Otherwise, we can generate all permutations of the list by iterating over each element, removing it from the list, and recursively generating all permutations of the remaining list. For each of these permutations, we insert the removed element in every possible position and yield the resulting permutation.

Here is the implementation of the permutations function:

def permutations(lst):
   if not lst:
       yield []
   elif len(lst) == 1:
       yield lst
   else:
       for i in range(len(lst)):
           rest = lst[:i] + lst[i+1:]
           for p in permutations(rest):
               yield [lst[i]] + p

We can test the function with the provided doctests:

>>> sorted(permutations([1, 2, 3]))
[[1, 2, 3], [1, 3, 2], [2, 1, 3], [2, 3, 1], [3, 1, 2], [3, 2, 1]]
>>> sorted(permutations((10, 20, 30)))
[[10, 20, 30], [10, 30, 20], [20, 10, 30], [20, 30, 10], [30, 10, 20], [30, 20, 10]]
>>> sorted(permutations("ab"))
[['a', 'b'], ['b', 'a']]

Note that the function returns a generator object, which can be sorted or iterated over to obtain all permutations of the input list.

To know more about input list visit:

https://brainly.com/question/30025939

#SPJ11

More _____ are killed from falls than in any other construction occupation.

Answers

More construction workers are killed from falls than in any other construction occupation.

Falls are a significant cause of fatalities in the construction industry. Construction workers often perform tasks at heights, such as working on scaffolds, ladders, or rooftops, which puts them at a higher risk of falling accidents. Due to the nature of their work, construction workers are exposed to various hazards, including unstable surfaces, inadequate fall protection systems, and human error. These factors contribute to the higher occurrence of fatal falls compared to other construction-related incidents.

Falls can result in severe injuries and fatalities, making fall prevention and safety measures crucial in the construction industry. Organizations and regulatory bodies have implemented safety guidelines and regulations to minimize the risk of falls and protect workers. These measures include providing proper fall protection equipment, conducting regular safety training, ensuring the stability of working surfaces, and implementing effective fall prevention strategies. Despite these efforts, falls remain a significant occupational hazard in construction, emphasizing the need for continuous vigilance and adherence to safety protocols to protect workers from fall-related accidents

Learn more about Construction workers here:

https://brainly.com/question/28735578

#SPJ11

1. What factors affect the costs of labor when estimating masonry?
2. How may the type of bond (pattern) affect the amount of materials required?
3. Why is high accuracy required with an item such as masonry?
4. Why should local suppliers be contacted early in the bidding process when special shapes or colors are required?
5. Why must the estimator separate the various sizes of masonry units in the estimate?
6. What is a cash allowance and how does it work?

Answers

1. When estimating masonry costs, several factors affect labor costs, including project complexity, regional labor rates, and worker skill levels.

2. The type of bond or pattern used in the masonry can also influence the amount of materials required. More intricate patterns may necessitate additional materials, leading to higher costs.

3. High accuracy is crucial for masonry work, as any discrepancies can result in structural issues or unsatisfactory aesthetics.

4. Local suppliers should be contacted early in the bidding process when special shapes or colors are required because it can take time to source these materials.

5. Estimators must consider various sizes of masonry units in their estimates to ensure accurate material and labor costs, preventing budget overruns.

6. A cash allowance is a predetermined amount of money set aside in a construction contract for specific items or tasks that are not yet determined. It works by providing flexibility in the budget for the contractor to purchase materials or services as needed without modifying the overall contract price.

1. The costs of labor when estimating masonry can be affected by several factors, such as the complexity of the project, the level of skill required, the availability of skilled laborers, and the location of the project site. Other factors that can affect labor costs include the seasonality of the project and the prevailing wage rates in the area.

2. The type of bond or pattern used in masonry can affect the amount of materials required. Different bond patterns require different amounts of bricks or blocks and may require more or less mortar. For example, a running bond pattern may require fewer materials than a Flemish bond pattern due to how the bricks or blocks are laid.

3. High accuracy is required in masonry because any errors or discrepancies in the measurements or calculations can lead to significant problems with the structural integrity of the building. Masonry is a load-bearing component of a building, and mistakes can result in safety hazards and costly repairs.

4. Local suppliers should be contacted early in the bidding process when special shapes or colors are required because these materials may not be readily available or need to be custom ordered. By contacting local suppliers early, the estimator can get accurate pricing and ensure the materials will be available when needed.

5. The estimator must separate the various sizes of masonry units in the estimate to ensure that the correct number of units are ordered and used on the project. Different sizes of bricks or blocks require different amounts of mortar and can affect the overall cost of the project.

6. A cash allowance is a specified amount of money set aside in a construction contract for a particular item or material. If the actual cost of the item or material exceeds the cash allowance, the owner will be responsible for paying the difference. If the actual cost is less than the cash allowance, the remaining funds may be returned to the owner. Cash allowances are used to provide flexibility in the bidding process and allow for unforeseen costs or changes in materials.

Know more about Masonry here :

https://brainly.com/question/16015856

#SPJ11

One method of meeting the extra electric power demand at peak periods is to pump some water from a large body of water (such as a lake) to a reservoir at a higher elevation at times of low demand and to generate electricity at times of high demand by letting this water run down and rotate a turbine (i. E. , convert the electric energy to potential energy and then back to electric energy). For an energy storage capacity of 5 × 10^6 kWh, determine the minimum amount of water that needs to be stored at an average elevation (relative to the ground level) of 75m. 2. 45 x 10^10kg
24. 5 x 10^10kg
1. 212 x 10^10kg
0. 245 x 10^10kg

Answers

The minimum amount of water that needs to be stored at an average elevation of 75 meters is: A. 2.45 × 10¹⁰ kg.

How to calculate the the minimum amount of water?

In Mathematics and Science, the potential energy (GPE) possessed by any physical object or body can be calculated by using this mathematical expression:

PE = mgh

Where:

PE represents potential energy.m represents the mass.h represents the height.g represents acceleration due to gravity.

By making mass (m) the subject of formula and performing the necessary conversion, we have:

Mass, m = gh/PE

Mass, [tex]m = \frac{5 \times 10^6\; KWh}{9.82 \; m/s^2 \times 75 \; m} \times \frac{3600 \;seconds}{1\;hour} \times \frac{1000 \;m^2/s^2}{KW \cdot s/kg}[/tex]

Mass, m = 2.45 × 10¹⁰ kg

Read more on potential energy here: brainly.com/question/28687188

#SPJ4

r21. define the following terms in the context of snmp: managing server, managed device, network management agent and mib.

Answers

In the context of Simple Network Management Protocol (SNMP), a managing serveris a central computer that collects and processes information about network devices.

It analyzes the performance, configuration, and status of devices to optimize network performance and troubleshoot issues.

A managed device, on the other hand, is any network-connected equipment (e.g., routers, switches, printers) that is monitored and controlled by the managing server. These devices support SNMP and can provide data about their current status and configuration.

The Network Management Agent is a software component that resides on managed devices. It facilitates communication between the managing server and managed device by collecting and reporting device data, and executing management commands from the managing server.

The Management Information Base (MIB) is a hierarchical database containing information about the managed device's parameters and characteristics. MIBs are structured in a tree-like format, with each node representing a specific aspect of the device. The managing server uses MIBs to gather information about the device and make necessary adjustments.


Learn more about Simple Network Management Protocol here:

https://brainly.com/question/17371161

#SPJ11

The intensity of electromagnetic wave B is four times that of wave A. How does the magnitude of the electric field amplitude of wave A compare to that of wave B?
The electric field amplitude of wave A is one-fourth that of wave B
The electric field amplitude of wave A is three times that of wave B
The electric field amplitude of wave A is two times that of wave.
The electric field amplitude of wave A is four times that of wave B
The electric field amplitude of wave A is one half that of wave B

Answers

The electric field amplitude of wave A is one-fourth that of wave B.

The intensity of an electromagnetic wave is proportional to the square of its electric field amplitude. Since wave B has an intensity that is four times that of wave A, the electric field amplitude of wave B must be two times that of wave A (since 2 squared equals 4). Therefore, the electric field amplitude of wave A is one-fourth that of wave B (since 1/4 squared equals 1/16, which is one-fourth of 1).

The relationship between the intensity of an electromagnetic wave and its electric field amplitude is given by the formula I = (c * ε0/2) * E^2, where I is the intensity, c is the speed of light, ε0 is the permittivity of free space, and E is the electric field amplitude. Since the speed of light and the permittivity of free space are constants, we can see that the intensity of a wave is proportional to the square of its electric field amplitude. In this case, we are told that the intensity of wave B is four times that of wave A. Therefore, we can write: I_B = 4 * I_A Using the formula above, we can also write: (c * ε0/2) * E_B^2 = 4 * (c * ε0/2) * E_A^2 Canceling out the constants and taking the square root of both sides, we get: E_B = 2 * E_A This tells us that the electric field amplitude of wave B is two times that of wave A. Therefore, the correct answer is that the electric field amplitude of wave A is one-fourth that of wave B, since the intensity is proportional to the square of the electric field amplitude.

To know more about amplitude visit:

https://brainly.com/question/8662436

#SPJ11

consider the following mos amplifier where r1 = 553 kΩ, r2 = 421 kΩ, rd= 47 kΩ, rs = 20 kΩ, and rl=100 kΩ. the mosfet parameters are: kn = 0.44 ma/v, vt = 1v, and =0.0133 v-1. find the voltage gain

Answers

The voltage gain can be calculated using the formula Av = -gmˣ (rd || rl), where gm is the transconductance of the MOSFET and rd || rl is the parallel combination of the drain resistance (rd) and the load resistance (rl).

How can the voltage gain of the given MOS amplifier be calculated?

In the given MOS amplifier, the voltage gain can be determined by analyzing the circuit using small-signal analysis techniques. The voltage gain is defined as the ratio of the change in output voltage to the change in input voltage.

To find the voltage gain, we need to calculate the small-signal parameters of the MOSFET, such as transconductance (gm), output conductance (gds), and the small-signal voltage at the drain (vds).

Using the given MOSFET parameters and the resistor values, we can calculate the small-signal parameters. Once we have these parameters, we can use the voltage divider rule and Ohm's law to calculate the voltage gain.

The voltage gain can be expressed as Av = -gm ˣ(rd || rl), where gm is the transconductance of the MOSFET and rd || rl is the parallel combination of the drain resistance (rd) and the load resistance (rl).

By substituting the values of gm, rd, and rl, we can determine the voltage gain of the MOS amplifier.

Learn more about voltage gain

brainly.com/question/28891489

#SPJ11

Consider the attribute set R=ABCDEFGH and the FD set F={AB-->C, AC-- >B, AD-->E, B-->D, BC-->A, E-->G} For each one of the following sets of attributes: i) Compute the set of functional dependencies that hold over that set ii) Compute a minimal cover a) ABC, b) ABCD, c) ABCEG, d) DCEGH, e) ACEH

Answers

To compute the set of functional dependencies that hold over a given set of attributes, we need to check which of the FDs in F have all their attributes contained within that set. For example, if we take the set ABC, we can see that AB->C, AC->B, and B->D hold over this set.

To compute a minimal cover, we need to first find all the dependencies implied by the FD set F. We can then remove any redundant dependencies to obtain a minimal cover. For example, if we take the set ABCD, we can see that AB->C and B->D hold over this set. However, AC->B can be removed since it is implied by AB->C and B->D. a) ABC: Set of functional dependencies = {AB->C, AC->B, B->D} Minimal cover = {AB->C, B->D} b) ABCD: Set of functional dependencies = {AB->C, B->D} Minimal cover = {AB->C, B->D} c) ABCEG: Set of functional dependencies = {AB->C, AC->B, AD->E, E->G} Minimal cover = {AB->C, AD->E, E->G} d) DCEGH: Set of functional dependencies = {AD->E, E->G} Minimal cover = {AD->E, E->G} e) ACEH: Set of functional dependencies = {AC->B, AD->E, E->G} Minimal cover = {AC->B, AD->E, E->G} Note that in each case, the minimal cover has been obtained by removing any redundant dependencies. This is important because it ensures that the set of dependencies is minimal and cannot be further reduced.

Learn more about attributes here-

https://brainly.com/question/30169537

#SPJ11

.public int recur(int x) { if (x > 0) { return 2 * recur(x / 2); } if (x < 0) { return recur(x - 10) / 2; } return 10; }
What value is returned as a result of the call recur(5)?
a. 5
b. -5
c. -60
d. 80
e. Nothing is returned: an error is caused by infinite recursion.

Answers

The answer is not one of the options given, and the correct answer is: e. Nothing is returned: an error is caused by infinite recursion. The method will continue to call itself infinitely with values less than 1, resulting in a StackOverflowError.

The code provided is a recursive method called "recur" that takes an integer parameter "x" and returns an integer value. The method first checks if the value of "x" is greater than 0. If it is, the method calls itself with "x/2" and multiplies the result by 2. If the value of "x" is less than 0, the method calls itself with "x-10" and divides the result by 2. If the value of "x" is 0, the method simply returns 10.
To determine the value returned by the call "recur(5)", we need to follow the method's logic. Since 5 is greater than 0, the method calls itself with "5/2" which is 2, and multiplies the result by 2. This returns 4.
To know more about recursive method visit:

brainly.com/question/13106357

#SPJ11

(a) [8 points] Give a recursive algorithm for finding the sum of the first n odd positive integers.
(b) [10 points] Give a recursive algorithm for finding n! mod m whenever n and m are positive integers.
(c) [12 points] Devise a recursive algorithm for computing n2 where n is a nonnegative integer, using the fact that (n + 1)2 = n2 + 2n + 1. Then prove that this algorithm is correct.

Answers

The code sum equals one for the base area where n equals one. One may calculate the sum of the first n odd positive integers by adding the value of the nth odd integer (2n-1) to the summation of the preceding n-1 odd integers. The  recursive algorithm for a, b and C are given in the image attached.

What is the algorithm  about?

The process is executed repeatedly through recursion until the point where the base condition is met.

To show the accuracy of this algorithm, we can utilize the technique of mathematical induction. The initial condition is easily proven as the result of 0 raised to the power of 2 is 0, If we suppose the algorithm accurately determines the square of every non-negative whole number up to k.

Learn more about  recursive algorithm from

https://brainly.com/question/25778295

#SPJ4

the scope of the project, the data captured, and the usability of new information technology systems are some of the decisions taken by:

Answers

The scope of a project, the data captured, and the usability of new information technology systems are all decisions that are typically made by the project team. This team can be made up of various stakeholders, including project managers, IT professionals, data analysts, and business users.

The scope of a project refers to the specific goals and objectives that the project is intended to achieve. This may involve defining the overall project goals, identifying the specific tasks and activities that need to be completed, and determining the resources and budget needed to complete the project successfully.

The data captured during the project may include a wide range of information, such as customer information, sales data, financial records, and other important data sets. The project team will need to decide which data is relevant and necessary to achieve the project goals and ensure that it is captured accurately and securely.

Finally, the usability of new information technology systems is a crucial consideration in any project. This may involve evaluating the ease of use of new software applications, ensuring that data is presented in a clear and meaningful way, and testing the system to ensure that it is reliable and performs as expected.

Overall, the project team is responsible for making key decisions related to the scope, data, and usability of new information technology systems. By working together effectively, the team can help ensure that the project is successful and meets the needs of all stakeholders.

Learn more about IT professionals here:-

https://brainly.com/question/7464249

#SPJ11

For each of the following functions indicate the class Θ(g(n)) the function belongs to. (Use the simplest g(n) possible in your answers.) Prove your assertions. a. (n2+1)10 c. 2n lg(n +2)2(n 2)2lg e. [log2n] d. 2"+1+3-1

Answers

a. The function (n^2 + 1)^10 belongs to the class Θ(n^20), because (n^2 + 1)^10 ≤ (n^2)^10 = n^20 for all n ≥ 1, and (n^2 + 1)^10 ≥ (n^2)^10/2 = (n^20)/2 for all n ≥ 2.

b. The function 2^n lg(n + 2)^2/(n^2 lg(n))^2 belongs to the class Θ(2^n), because 2^n lg(n + 2)^2/(n^2 lg(n))^2 ≥ 2^n for all n ≥ 1, and 2^n lg(n + 2)^2/(n^2 lg(n))^2 ≤ 2^(n+2) for all n ≥ 2.

c. The function [log2n] belongs to the class Θ(log n), because [log2n] ≤ log2n ≤ [log2n] + 1 for all n ≥ 1.

d. The function 2^(n+1) + 3^(n-1) belongs to the class Θ(3^n), because 2^(n+1) + 3^(n-1) ≤ 3(3^n)/2 for all n ≥ 1, and 2^(n+1) + 3^(n-1) ≥ 3^n for all n ≥ 3.


For each of the following functions, I will indicate the class Θ(g(n)) the function belongs to and provide a brief proof for each:

a. (n^2+1)^10
The function belongs to Θ(n^20). This is because the highest power of n is the dominating factor, and other terms become insignificant as n grows larger.

b. 2n lg((n+2)^2)(n^2)2lg
Assuming "lg" stands for logarithm base 2, this function belongs to Θ(n^3*log(n)). Here, the main factors are n from 2n and n^2 from (n^2)2lg, multiplied by the logarithmic term lg((n+2)^2), which simplifies to 2*log(n+2) ≈ 2*log(n).

c. [log2n]
This function belongs to Θ(log(n)), since the brackets indicate the integer part of the logarithm, which only marginally affects the growth of the function.

d. 2^(n+1)+3^(n-1)
The function belongs to Θ(3^n), as the exponential term 3^(n-1) dominates the growth of the function compared to 2^(n+1).


To know about function visit:

https://brainly.com/question/12431044

#SPJ11

Star A has a parallax of 2 arc sec, while Star B has that of 4 arc sec when observed on Earth. Choose the correct statement. A. Star B is 0.25 pc away from the Earth. B. Star A is 2 pc away from the Earth. C. Star A is closer than Star B from the Earth. D. You need to know the sizes of the stars to know the distances to these stars.

Answers

Star B is closer to Earth than Star A, and Star A is 2 pc away from the Earth. Knowing the sizes of the stars is not necessary. Therefore, the correct option is (B) Star A is 2pc away from the Earth.

The correct statement is B. Star A is 2 pc away from the Earth.

Parallax is the apparent shift of a star's position against the background as the Earth orbits around the Sun.

The parallax angle is inversely proportional to the distance of the star, so the larger the parallax, the closer the star is to Earth.

In this case, Star A has a smaller parallax than Star B, which means it is farther away.

The distance can be calculated using the formula:

distance (in parsecs) = 1 / (parallax angle in arc seconds).

Therefore, Star A is 2 parsecs away from Earth, while Star B is only 0.5 parsecs away.

The size of the stars is not relevant for determining their distance using parallax.

Therefore, the correct option is (B) Star A is 2pc away from the Earth.

For more such questions on Stars:

https://brainly.com/question/30333308

#SPJ11

Based on the given information, the correct statement is C. Star A is closer than Star B from the Earth. This is because the parallax of a star is inversely proportional to its distance from Earth. Since Star A has a smaller parallax than Star B, it means that Star A is farther away from Earth than Star B. Therefore, option B is incorrect. However, we cannot determine the exact distance of either star from Earth based on just their parallax values. Option D is also incorrect because we can determine the distance of a star using its parallax value and the known distance between the Earth and the Sun, without knowing the size of the star.

To know more about your parallax click here

https://brainly.com/app/ask?entry=top&q=PARRALAX

#SPJ11

determine the composition of the vapor phase, given a liquid phase concentration x1 of 0.26 at the given pressure, and the fraction of vapor and liquid that exit the flash tank.

Answers

To determine the composition of the vapor phase, we need to use the vapor-liquid equilibrium data for the given pressure. We also need to know the mole fraction of the liquid phase component, which is given as x1 = 0.26. With this information, we can use the following steps:

Calculate the mole fraction of the vapor phase component using the vapor-liquid equilibrium data for the given pressure.Calculate the total mole fraction in the flash tank using the vapor and liquid fractions.Use the total mole fraction and the mole fraction of the vapor phase component to calculate the mole fraction of the liquid phase component.Subtract the mole fraction of the liquid phase component from 1 to obtain the mole fraction of the vapor phase component.

We can use the vapor-liquid equilibrium data to determine the mole fraction of the vapor phase component. For example, if the equilibrium data gives a mole fraction of 0.4 for the vapor phase component at the given pressure, then we know that the vapor phase contains 0.4 moles of the vapor phase component for every mole of the total mixture.

The total mole fraction in the flash tank can be calculated using the vapor and liquid fractions. For example, if the flash tank produces a vapor fraction of 0.6 and a liquid fraction of 0.4, then the total mole fraction is:

Total mole fraction = (0.6 * mole fraction of vapor phase component) + (0.4 * mole fraction of liquid phase component)

Using the given liquid phase concentration of x1 = 0.26, we can calculate the mole fraction of the liquid phase component as:

Mole fraction of liquid phase component = x1 / (1 - x1)

Finally, we can calculate the mole fraction of the vapor phase component as : Mole fraction of vapor phase component = 1 - mole fraction of liquid phase component

This will give us the composition of the vapor phase in the flash tank.

To know more about equilibrium: https://brainly.com/question/517289

#SPJ11

find the equivalent inductance leq in the given circuit, where l = 5 h and l1 = 11 h. the equivalent inductance leq in the circuit is h.

Answers

The equivalent inductance leq in the circuit is 3.25 h. To find the equivalent inductance leq in the given circuit, we need to use the formula for the total inductance of inductors connected in series.

1/leq = 1/l + 1/l1
Substituting the given values, we get:
1/leq = 1/5 + 1/11
Solving for leq, we get:
b

In order to find the equivalent inductance (Leq) of the given circuit with L = 5 H and L1 = 11 H, you will need to determine if the inductors are connected in series or parallel. If the inductors are in series, Leq is simply the sum of L and L1. If they are in parallel, you will need to use the formula 1/Leq = 1/L + 1/L1.  

To know more about inductance visit-

https://brainly.com/question/18575018

#SPJ11

Find the trip name of all reservations for hiking trips and sort the results by trip name in ascending order.
SQL Code for Q11:
SELECT DISTINCT TRIP_NAME
FROM RESERVATION, TRIP
WHERE RESERVATION.TRIP_ID = TRIP.TRIP_ID
AND TYPE ='Hiking'
Order by TRIP_NAME;

Answers

list of distinct trip names for all hiking trips that have reservations, sorted in ascending order by trip name.

How would you modify the query to show the number of reservations made for each hiking trip?

Your SQL code looks correct to retrieve the trip names of all reservations for hiking trips and sort them in ascending order by trip name. Just one suggestion, you can use explicit JOIN syntax instead of implicit join for better readability and maintainability of the query. Here's an updated version:

```

SELECT DISTINCT TRIP.TRIP_NAME

FROM RESERVATION

JOIN TRIP ON RESERVATION.TRIP_ID = TRIP.TRIP_ID

WHERE TRIP.TYPE = 'Hiking'

ORDER BY TRIP.TRIP_NAME ASC;

```

This code should return a list of distinct trip names for all hiking trips that have reservations, sorted in ascending order by trip name.

Learn more about Hiking

brainly.com/question/31744283

#SPJ11

What type of organization is heavily using AI-enabled eHRM processes now?

Answers

Many large organizations, including those in the healthcare, finance, and technology industries, are heavily using AI-enabled eHRM processes now.

AI-enabled eHRM (Electronic Human Resource Management) processes are becoming increasingly popular among organizations, as they allow for more efficient and accurate management of employee data. This technology uses AI to analyze data and make predictions about employee performance and behavior, allowing HR managers to make better-informed decisions about hiring, training, and retention.

Many large organizations in various industries, including healthcare, finance, and technology, are now using AI-enabled eHRM processes to improve their HR operations. In healthcare, for example, AI-powered eHRM systems can help identify patterns in patient data to improve healthcare outcomes.

In finance, these systems can help with compliance and regulatory reporting. In technology, AI-enabled eHRM processes can help identify and attract top talent, and improve employee engagement and retention.

Learn more about technology here:

https://brainly.com/question/28288301

#SPJ11

in illustration 6, what can close the systemic offset between the actual and desireda. Offset b. Kd c. Kid. Кр

Answers

In Illustration 6, the systemic offset between the actual and desired can be closed by Kd (derivative gain).

What component can close the systemic offset between the actual and desired values in Illustration 6?

In control systems, the systemic offset refers to the steady-state difference between the actual value and the desired value of a controlled variable.

To minimize or eliminate this offset, various control techniques are employed.

Among the options provided, Kd (derivative gain) is the most relevant for addressing the systemic offset.

The derivative control component in a control system responds to the rate of change of the error signal between the actual and desired values.

By adjusting the derivative gain, the system can anticipate and counteract changes in the error signal, helping to reduce the systemic offset.

The proportional gain (Kp) and integral gain (Ki) are also important components in control systems, but they are primarily focused on reducing other types of errors, such as proportional and integral errors respectively.

While they contribute to overall control performance, they may not directly address the systemic offset as effectively as the derivative gain.

Therefore, to close the systemic offset between the actual and desired values in Illustration 6, adjusting the Kd (derivative gain) would be the most appropriate choice.

Learn more about derivative gain

brainly.com/question/31463018

#SPJ11

Consider an LTI system with impulse response as, h(t) = e^-(t-2)u(t - 2) Determine the response of the system, y(t), when the input is x(t) = u(t + 1) - u(t - 2)

Answers

Therefore, the response of the LTI system with the given impulse response to the input x(t) = u(t + 1) - u(t - 2) is y(t) = e^(t-2-u(t-2)) [u(t-3) - u(t)].

We can use the convolution integral to find the output of the LTI system:

y(t) = x(t) * h(t) = ∫[x(τ) h(t - τ)]dτ

where * denotes convolution and τ is the dummy variable of integration.

Substituting the given expressions for x(t) and h(t), we get:

y(t) = [u(t + 1) - u(t - 2)] * [e^-(τ-2)u(τ - 2)]dτ

We can split the integral into two parts, from 0 to t-2 and from t-2 to ∞:

y(t) = ∫[u(τ + 1) e^-(t-τ-2)]dτ - ∫[u(τ - 2) e^-(t-τ-2)]dτ

The first integral is nonzero only when τ + 1 ≤ t - 2, or equivalently, τ ≤ t - 3. Thus, we have:

∫[u(τ + 1) e^-(t-τ-2)]dτ = ∫[e^-(t-τ-2)]dτ = e^(t-2-u(t-2)) u(t-2)

Similarly, the second integral is nonzero only when τ - 2 ≤ t - 2, or equivalently, τ ≤ t. Thus, we have:

∫[u(τ - 2) e^-(t-τ-2)]dτ = ∫[e^-(t-τ-2)]dτ = e^(t-2-u(t-2)) u(t)

Substituting these results back into the expression for y(t), we get:

y(t) = e^(t-2-u(t-2)) [u(t-2) - u(t-3)] - e^(t-2-u(t-2)) [u(t) - u(t-2)]

Simplifying, we get:

y(t) = e^(t-2-u(t-2)) [u(t-3) - u(t)]

To know more about LTI system,

https://brainly.com/question/31265334

#SPJ11

write a program that uses a loop to calculate the first seven values of the fibonacci number sequence, described by the following formula: fib(1) = 1, fib(2) = 1, fib(n) = fib(n – 1) fib(n – 2).

Answers

In this program, we start by defining the first two Fibonacci numbers, `fib1` and `fib2`, which are both equal to 1. We then print out these two values.

Here is a Python program that uses a loop to calculate the first seven values of the Fibonacci number sequence:

```
fib1 = 1
fib2 = 1
print(fib1)
print(fib2)
for i in range(3, 8):
   fib = fib1 + fib2
   print(fib)
   fib1 = fib2
   fib2 = fib
```



Next, we use a `for` loop to calculate the remaining five Fibonacci numbers. The loop iterates over the range from 3 to 8 (exclusive), since we have already calculated the first two Fibonacci numbers.

Inside the loop, we calculate the current Fibonacci number (`fib`) by adding the previous two Fibonacci numbers (`fib1` and `fib2`). We then print out the current Fibonacci number and update the values of `fib1` and `fib2` to prepare for the next iteration of the loop.

After the loop completes, we will have printed out the first seven values of the Fibonacci number sequence, as requested.

To know more about Fibonacci numbers visit:

https://brainly.com/question/13525235

#SPJ11

Other Questions
__________ is a technique used for reducing resistance to change and is used when resistance is due to misinformation.A. Education and communicationB. ParticipationC. Facilitation and supportD. Negotiation Frank can type a report in 7 hours. James takes 2 hours to type it. How long will it take the two of them typing together Assuming 100% efficiency of energy conservation, how many moles of ATP can be synthesized under standard conditions by the complete oxidation of 1 mol of glucose? Five-day-old Max has his eyes closed and has a breathing pattern that alternates between regularity and irregularity. This indicates that he is currently in the _____ newborn state Refer to the Canary Cruises Corporation Corporation Income Stateme operating cash flow for the Canary Cruises Corporation for 2019? A researcher designs a study that will investigate the effects of a newstatistical software on graduate students' understanding of statistics. Theresearcher creates a survey, consisting of 10 questions. She compares twosamples, each containing 10 randomly selected students. One sampleconsists of students graduating in May. The other sample consists ofstudents graduating the following May. Select all weaknesses in the design.A. The sample size is too small.B. One sample has more graduate level experience than the othersample.C. An exam should be used, instead.D. Randomly selected students were used. Ethan bought a computer on sale at a 30% discount off of the original price. If Ethan's sale price was $420.00, what was the original price of the computer? a. $1,400.00 b. $600.00 c. $294.00 d. $323.08 e. $546.00 A 25.0-mL sample of 0.150 M hypochlorous acid, HClO, is titrated with a 0.150 M NaOH solution. What is the pH after 13.3 mL of base is added? The Ka of hypochlorous acid = 3.0 x 10-8.A. 2.54B. 7.58C. 7.46D. 7.00E. 7.32 Click on those characteristics which form an exclusive chordate combination. Dorsal tubular nerve cord Pharyngeal slits Bilateral symmetry es Notochord Complete digestive tube Postanal tail Cranial brain/nerve Endostyle Deuterostome development Publish or perish A newly minted Ph.D. starts a tenure-track job and is one of two types: high-ability (CH) or low-ability (OL), where PH > 0. > 0. The assistant professor knows her type, the department that hires her only knows that she is high ability with probability p < 1/2. The assistant professor first chooses how hard to work (how many papers to publish), then the department decides whether to grant her tenure (T) or not (N). If the department grants tenure, then the assistant professor's payoff is V - 9/6, where V is the value of tenure and q is the number of papers published. The department's payoff is 1 if they tenure a high ability type and -1 if they tenure a low ability type. If the department does not grant tenure to the assistant professor, then the department gets a payoff of 0 and the assistant professor gets a payoff of -g/0. 1. What, if any, pooling PBEs are there? 2. Write out the incentive compatability constraints. 3. What is the separating PBE that involves the smallest number of papers needed to get tenure? why was reuven's school looked down upon compared to the other schools in the chosen one Calculate the current through the kettle when 2400 coulombs of charge flows in 250 seconds If managers do not pay enough attention to planning and organizing the network, they are going to end up being proactive vs. reactive in solving network.a. Trueb. false find the length of the loan in months, if $500 is borrowed with an annual simple interest rate of 13 nd with $565 repaid at the end of the loan. Which type of wireless technology uses microwave radio waves to transmit data? a. Infrared. b. Mediumband. c. Wideband. d. Narrowband. what is the theory that says the milky way formed from a large proto-galactic gas cloud? How are financial controls different for a global organization? provide three examples. How many unpaired electrons would you expect on Vanadium in V2O3 Enter an integer. All of the following are areas within which you must improve your abilities EXCEPT: a. forming concepts. b. generalizing concepts. c. applying concepts AnLCRseries circuit withL=0.120H,R=240, andC=7.30Fcarries an rms current of0.450Awith a frequency of400Hz.(a) What are the phase angle and power factor for this circuit?(b) What is the impedance of the circuit?(c) What is the rms voltage of the source?(d) What average power is delivered by the source?(e) What is the average rate at which electrical energy is converted to thermal energy in the resistor?(f) What is the average rate at which electrical energy is dissipated ( converted to other forms) in the capacitor?(g) In the inductor ?