Answer: 4.29 kg
Explanation: If 70% of the body weight is from water, then 30% of the body weight is from non-water substances such as bones, muscles, and organs.
Let's assume the weight of the person to be x kg. Then:
70% of x kg is water weight = 0.7x kg
30% of x kg is non-water weight = 0.3x kg
Since the person has 3 liters of extracellular water in blood (vascular volume), we can convert this to kilograms using the density of water, which is 1 kg/L. Therefore:
3 liters of water = 3 kg of water
Since extracellular water is a component of the total body water, we can set up the following equation:
Total body water = Intracellular water + Extracellular water
Assuming that intracellular water is about 2/3 of the total body water and extracellular water is about 1/3 of the total body water, we can write:
Total body water = (2/3) x + (1/3) x = x
Now we can solve for x by equating the total body water to the water weight plus the non-water weight:
Total body weight = Water weight + non-water weight
x = 0.7x + 0.3x
x = 3 kg / 0.7
x = 4.29 kg
Therefore, the weight of this person is approximately 4.29 kg.
To which side of the kidney does the ureter connect?
A. Proximal
B. Superior
C. Medial
D. Axial
The ureter connects to the C.) medial side of each kidney.
What is the function of kidney?Kidneys' primary function is to remove toxins from the blood and convert waste products into urine. The average kidney weighs 160 grammes and excretes 1.5 litres of urine every day. Every 24 hours, two kidneys work together to filter 200 litres of fluid.
The kidneys aid to maintain the body's chemical balance by excreting waste and excess water from the blood as urine and removing excess salt, potassium, and calcium. Additionally, they produce hormones that encourage bone marrow to produce red blood cells, which is referred to as renal function. They also assist manage blood pressure.
To know more about kidney, refer
https://brainly.com/question/26062461
#SPJ1
t/f a condition that occurs when warm air traps cooler air at the surface of the earth is greenhouse gases.
False. A condition that occurs when warm air traps cooler air at the surface of the earth is greenhouse gases called an inversion.
When a layer of warm air forms above a layer of cooler air, pollutants and other particles near to the earth are effectively trapped. This can result in the buildup of smog, particulate matter, and other harmful substances, all of which can damage human health and the environment.
These gases, which include carbon dioxide, methane, and water vapor, trap heat in the atmosphere and add to global warming. The greenhouse effect is a natural process that is required for life to exist on Earth.
However, human actions such as the use of fossil fuels and deforestation have increased greenhouse gas emissions, causing global temperatures to rise and resulting in climate change.
Learn more about Greenhouse gases
https://brainly.com/question/14169551
#SPJ4
Complete question
A condition that occurs when warm air traps cooler air at the surface of the earth is greenhouse gases is Inversion. True or False
What is the difference between Interphase-GAP1, Synthesis, Gap2, Mitosis(PMAT), and Cytokinesis?
Interphase is the longest phase of the cell cycle, which is further divided into three stages: G1 (Gap 1), S (Synthesis), and G2 (Gap 2).
What is the difference between Interphase-GAP1, Synthesis, Gap2, Mitosis(PMAT) and Cytokinesis?G1 Phase: This is the phase where cell is growing and carrying out its normal metabolic functions. During this phase, cell prepares for DNA replication and checks for DNA damage before progressing to next stage.
S Phase: This is the phase where DNA replication occurs and the cell synthesizes new DNA by copying the existing DNA, resulting in two identical copies of DNA.
G2 Phase: This is the phase where cell checks for errors and ensures that DNA replication is complete before entering mitosis.
After interphase, cell enters the M phase or the mitotic phase, which includes mitosis and cytokinesis.
Mitosis: Mitosis is the process of cell division where replicated DNA is separated into two identical nuclei. It is further divided into four stages: prophase, metaphase, anaphase and telophase (PMAT).
Cytokinesis: Cytokinesis is the process of cell division where cytoplasm divides resulting in two daughter cells with identical genetic material.
To know more about interphase, refer
https://brainly.com/question/30622117
#SPJ1
Carbon sinks are reservoirs that hold large amounts of carbon. Which of the following are considered to be carbon sinks? Ο Ο Ο fossil fuels deep underground Ο the atmosphere Ο All of the answer choices are correct
None of the answer choices are correct because Fossil fuels and the atmosphere are not considered to be carbon sinks.
What are carbon sinks?
Carbon sinks are natural or artificial reservoirs that absorb and store atmospheric carbon dioxide (CO2) from the atmosphere through biological or physical processes.
The main natural carbon sinks are oceans, forests, and soil, which take up CO2 through photosynthesis and absorption. Carbon sinks help to mitigate climate change by reducing the amount of greenhouse gases in the atmosphere, which can help to reduce global warming.
Learn more about carbon sinks at: https://brainly.com/question/1040499
#SPJ1
What was the independent variable in the first catalase experiment?
Answer:
Independent and Dependent Variables Independent Variable: The independent variable is the chicken liver and the potato. Dependent Variable: The dependent variable is what I will be measuring which is how much peroxide I will use for each individual experiment.
Weathering by abrasion, could
occur with what
Moving water causes abrasion as particles in the water collide and bump against one another.
which of the following favors filtration into the bowman's or glomerular capsule of nephron? multiple select question.
clostridium tetani, the bacterium that causes tetanus, can only survive in soil away from oxygen. it is considered which of the following?
Tetanus-causing bacteria Clostridium tetani is regarded as an obligate anaerobe. It can only exist in surroundings devoid of oxygen, which means that it cannot thrive in the presence of oxygen.
What allows Clostridium tetani to endure?The creature is heat-sensitive and is incapable of surviving in an oxygen-rich environment. In contrast, the spores are remarkably resistant to heat and common antiseptics.
Can the tetanus-causing Clostridium tetani bacterium only endure in oxygen-free soil?The bacteria Clostridium tetani produces a toxin (poison) that causes tetanus. Oxygen prevents the C. tetani bacteria from surviving. Because to their resistance to heat and other chemicals, they develop spores that are particularly challenging to eradicate.
To know more about Clostridium tetani visit:-
https://brainly.com/question/28215960
#SPJ1
Which one of the following is a trait that increases the chances of survival for an endangered species?
A: large size
B: long life span
C: widespread distribution
D: small number of offspring
Option C is correct : widespread distribution is a trait that increases the chances of survival for an endangered species
An endangered species with a widespread distribution has a greater chance of survival than a species that is confined to a small, isolated area. A widespread distribution allows a species to occupy multiple habitats, increasing their chances of finding food, water, and other resources needed for survival. It also reduces the risk of natural disasters or human activities affecting the entire population at once.
While a large size or a long life span may provide some advantages for an individual, they do not necessarily increase the chances of survival for an entire endangered species. In fact, a species with a small size or a short life span may have a higher reproductive rate and adaptability, allowing them to recover more quickly from population declines.
Learn more about “ endangered species “ visit here;
https://brainly.com/question/10415903
#SPJ4
In what type of organisms can the CRISPR/Cas system be found naturally?
Please help me solve the first question step by step
A. The concentration of algal cells at 0.08 absorbance would be 2 10E6 if we extrapolate the given graph.
How to check the absorbanceOur standard culture is this. A 0.5 10E6 concentration is what we need. Our stock will be diluted as a result.
we have 0.5 x 10⁶
the original stock is given as 2 x 10⁶
The df = 15 + 5 / 5
= 4
Final volume / initial volume
2 x 10⁶ / 4
= 0.5 x 10⁶
b. The number of microbial cells in a culture of microbes affects how much of it is absorbed.
The absorbance was lower at the beginning of the culture because there were fewer algal cells present. At the end of the culture, when enough algal cells had grown, the concentration of algal cells had also increased, making the absorbance value higher.
Read more on absorbance here:https://brainly.com/question/14919298
#SPJ1
Skeletal muscles usually consist of several distinct types of muscle fibers. Different muscle fiber types in the same muscle become apparent when certain dyes are applied, as seen in the stained micrograph on the right. Consider the three muscle fiber types labeled Type A Type B, and Type C. -Type C Type B Type A Dr. Gladden Willis / Visuals Unlimited, Inc./Getty Images Each muscle ber type has a unique set of contractile properties. The following graphs plot the force of muscle fiber contractions in response to a single stimulus (a single action potential, shown as one black arrowhead), a short burst of stimull (a rapid succession of action potentials, shown as a sequence of black arrowheads), and repeated bursts of stimull (a sustained succession of action potentials, shown as a continuous black bar). Force produced due to a single stimulus Force produced due to a short burst of stimuli Force produced due to repeated bursts of stimuli 0.5 0.5- Force produced due to a single stimulus Force produced due to a short burst of stimuli Force produced due to repeated bursts of stimuli 0.5- 0.5- 0.4 0.4 0.3 0.3- Force (N) 0.2- 0.2- 0.1 0.1- 0 0- 0 50 100 150 200 250 300 Time (msec) 0 0 2 60 500 1000 1500 Time (msec) 4 6 Time (min) In each row of the following table, identify the muscle fiber type or types described by each statement. Check all that apply. Type A Type В Type с When these muscle fibers experience a short burst of stimuli, fatigue sets in within 750 milliseconds of the first stimulus. s This muscle fiber type can still generate force after 60 minutes of repeated stimulation. This muscle fiber type produces the strongest possible peak force. In other words, it has the strongest contractile activity Based on how these three muscle fiber types respond to different stimull, Type B y fibers are most likely to be abundant in muscles that contract very strongly but only for a short period of time. These fibers are also known as fast aerobic muscle fibers.
Skeletal muscle fibres come in two varieties: type I slow-twitch and type II fast-twitch (type II). Fast-twitch muscle fibres assist short, strong actions like sprinting or weightlifting.
While slow-twitch muscle fibres support long distance endurance sports like marathon running. The majority of skeletal muscles in humans contain a mix of fibre types: postural and endurance muscles have a higher proportion of MHC I fibres, whereas muscles involved in quick, powerful, short-duration movements have a higher proportion of MHC IIA and IIX fibres. More mitochondria are present in type 1 ("slow twitch") fibres, which enables them to create more energy and makes them ideal for prolonged, aerobic activity.
To know more about Skeletal muscle fibres, click here:
https://brainly.com/question/29142695
#SPJ4
What are two different types of muscle fibres that can be found in skeletal muscles name some characteristics?
The Localistic Model of brain function was first hypothesized by Earnest Aubertin. Which of the following statement(s) is/are true regarding this model?
[mark all correct answers]
a.
The Localistic Model states that a particular region of the brain is dedicated to a specific task.
b.
The Localistic Model has been thoroughly discredited by science.
c.
It is also known as the Distributed Model, popularized by Pierre Gratiolet.
d.
Science supports many aspects of the Localistic Model. However this model does not entirely explain how the brain works.
e.
The Localistic Model explains that different regions work together to accomplish various different functions.
According to the Localistic Model, a specific area of the brain is saved for a clear activity. Numerous facets of the Localistic Model are backed by science. Yet, the brain's workings are not fully defined by this model. The correct answer is (A, D).
The study of the nervous system and the brain is referred to as "neuroscience," while the study of how the nervous system influences behavior is referred to as "biological psychology."
Signals are sent from the brain to the rest of the body, including internal organs, by the nervous system. The activity of the nervous system controls the ability to move, breathe, see, and think, among other things.
The scientific study of the nervous system—the brain, spinal cord, and peripheral nervous system—and how it works is known as neuroscience.
To learn more about Localistic, here
https://brainly.com/question/10839757
#SPJ4
fill in the blank. in order to transform the___of atp into ___ to do work, the bonds of atp must be broken into adp and an available phosphate group.
In order to transform the energy of ATP into work, the bonds of ATP must be broken into ADP and an available phosphate group.
ATP is a nucleotide that contains a ribose sugar molecule, a nitrogen-containing adenine molecule, and three phosphate groups that are negatively charged.
ATP, or adenosine triphosphate, is a high-energy molecule that serves as the primary energy source for cellular functions. It acts as the power source for all biological activities in cells by supplying energy.
It is produced during cellular respiration, a process that converts glucose and oxygen into energy in the form of ATP. The energy stored in the high-energy bonds of ATP can be utilized to carry out a variety of cellular functions, such as transporting molecules across cell membranes, synthesizing complex molecules, and moving cells.
When ATP is used to accomplish work, it is converted to ADP (adenosine diphosphate) and an available phosphate group, and the energy stored in its bonds is released to do work. This process is referred to as hydrolysis.
For such more question on phosphate:
https://brainly.com/question/12802720
#SPJ11
ANSWERRRRRR PLSSSS ASAPP
Answer:
1) whole wheat
2) yeast
3) so the bread can rise
4) it makes it rise and expand by the particles vibrating (dont know if this is right)
5) nutrients
the organelles found in modern eukaryotic cells which are responsible for providing energy for the cell are ___________ and _____________.
The organelles found in modern eukaryotic cells which are responsible for providing energy for the cell are mitochondria and chloroplasts.
Mitochondria are known as the "powerhouse" of the cell as they convert energy from food molecules into a form the cell can use, known as ATP. Chloroplasts are responsible for photosynthesis, which captures the energy from sunlight and converts it into a form the cell can use The organelles found in modern eukaryotic cells which are responsible for providing energy for the cell are mitochondria and chloroplasts.Eukaryotic cells are organisms whose cells have a nucleus and other organelles enclosed by a plasma membrane.
The organelles found in modern eukaryotic cells that are responsible for providing energy for the cell are mitochondria and chloroplasts.The majority of eukaryotes have mitochondria, which are responsible for cellular respiration. Mitochondria are an essential part of cellular respiration, which generates ATP, the molecule that supplies the cell with energy. Chloroplasts, on the other hand, are responsible for photosynthesis in plants and algae.The answer is: Mitochondria and chloroplasts.
For more such questions on organelles
https://brainly.com/question/6563752
#SPJ11
with respect to developmental differences in metacognition, which of the following statements is most accurate
The most accurate statement with respect to developmental differences in metacognition is only minimally developed in early childhood and reaches maturity during adolescence. Here option B is the correct answer.
Metacognition refers to our ability to monitor, regulate, and direct our own learning and thinking processes. It involves being aware of what we know and what we don't know, setting goals, planning and monitoring our progress, and evaluating our own performance.
Research has shown that metacognitive abilities develop gradually over time and continue to improve throughout childhood and adolescence. Young children are able to use basic metacognitive strategies such as rehearsal and elaboration, but they are not able to fully control their own learning.
As children grow older and gain more experience, they become better able to regulate their own learning and use more complex metacognitive strategies. However, the development of metacognition can vary across individuals and is influenced by a variety of factors such as cognitive abilities, motivation, and cultural background.
To learn more about metacognition
https://brainly.com/question/887867
#SPJ4
Complete question:
With respect to developmental differences in metacognition, which of the following statements is most accurate
A. Metacognition is fully developed at birth and remains stable throughout life
B. Metacognition is only minimally developed in early childhood and reaches maturity during adolescence
C. Metacognition is primarily a function of intelligence, and individual differences remain stable throughout life
D. Metacognition is a skill that develops at a relatively constant rate throughout the lifespan
E. Metacognition is heavily influenced by culture, and individual differences are not consistent across different cultural contexts.
What does receiver bee stand over???
Answer:
The flower.
Explanation:
It eats the nectar and the pollen sticks onto its fur, so that it can pollinate other flowers.
in the atmosphere are several distinct global wind patterns. where there are low pressure belts, the air is ___
In the atmosphere, there are several distinct global wind patterns. When there are low-pressure belts, the air is rising.
Air in low-pressure belts rises since the atmospheric pressure is much lower than the atmospheric pressure around it. When the air gets warmed up, it rises, and it reduces the pressure in the surrounding air. In the tropics, the intertropical convergence zone, or ITCZ is a zone of low-pressure belts where the trade winds converge. At the equator, it rises, cools down, and goes towards the poles. It is the area that receives the most rainfall on earth since the warm air has more moisture content that condenses as it rises and cools down. This belt is very important for the earth's climate since it is responsible for regulating weather patterns across the planet. Winds move from high pressure to low pressure, and that creates air currents. Warm air rises, and cool air sinks, and that creates convection cells. These convection cells create high and low-pressure belts around the earth, and it creates the weather patterns that we see daily.
To learn more about Atmosphere :
https://brainly.com/question/921955
#SPJ11
Color blindness is an X-linked recessive trait. A color-blind man marries a homozygous normal female. They have two children, both with what is known as Turner Syndrome (monosomy X or X0 or X_). One child has normal vision and one is color-blind. Did nondisjunction occur in the mother or father for the child with normal vision? Explain.
Men are more likely than women to have red-green color blindness because it is inherited on the X chromosome. This is due to Only one X chromosome coming from a male's mother.
Red-green color blindness will occur if that X chromosome, as opposed to a normal X chromosome, contains the gene for the condition.
He would have a Y and an Xc, both of which contain DNA that can cause color blindness; that is, all of his Xs would cause color blindness. Because of this, he probably doesn't see colors. There is a 50% chance that each daughter will carry the disease, and there is a 50% chance that each son will be color blind.
Red-green color blindness and hemophilia A are two examples of X-linked recessive conditions: Color blindness that is red-green. A person with red-green color blindness is able to see normally but cannot differentiate between blue-green and red shades.
To learn more about chromosomes here
https://brainly.com/question/1596925
#SPJ4
Why are climate change and global warming environmental problems
Answer:
Increased temperatures, droughts, and bug outbreaks are all results of climate change. Wildfires have become more frequent and intense as a result of these changes. Moreover, the warmer environment has led to a decrease in water resources, decreased agricultural output, and heat-related health effects in urban areas.
Explanation:
Climate change has made it harder for both people and wild animals to survive. Droughts that are more frequent and extreme, storms, heat waves, rising sea levels, melting glaciers, and warmer oceans can all directly injure animals, destroy the habitats they rely on for survival, and have a disastrous impact on people's way of life and communities.
which of the following can defend the body by either opsonizing bacteria, lysing bacteria, and/or promoting inflammation
The components that can defend the body by either opsonizing bacteria, lysing bacteria, and/or promoting inflammation are Alpha and beta interferons; option D.
What are Alpha and beta interferons?Alpha and beta interferons are types of proteins produced by cells of the immune system in response to viral infections, tumors, and other challenges to the immune system. They are part of the interferon family of cytokines and are involved in the body's innate immune response.
Alpha interferon (IFN-α) is produced by leukocytes, such as monocytes and macrophages, while beta interferon (IFN-β) is produced by fibroblasts and other cells.
Both types of interferons play a role in activating immune cells, such as natural killer cells and T cells, to attack infected cells and prevent the spread of viruses and bacteria.
Learn more about alpha and beta interferons at:https://brainly.com/question/12024276
#SPJ1
Cmplete question:
Which of the following can defend the body by either opsonizing bacteria, lysing bacteria, and/or promoting inflammation?
Neutrophils
Macrophages
Activation of the complement system
Alpha and beta interferons
please help need this soon
Frequency of dominant allele: 0.99
Frequency of recessive allele: 0.01
% homozygous dominant: 98.01%
% homozygous recessive: 0.01%
% heterozygous: 1.98%
What is Hardy -Weinberg equation?The Hardy-Weinberg equation is a mathematical model that describes the relationship between the frequencies of alleles and genotypes in a population. It is based on the assumptions of a large population size, random mating, no migration, no mutation, and no natural selection.
The equation is:
p² + 2pq + q² = 1
where:
p = frequency of the dominant allele
q = frequency of the recessive allele
p² = frequency of the homozygous dominant genotype
q² = frequency of the homozygous recessive genotype
2pq = frequency of the heterozygous genotype.
Given that cystic fibrosis is a homozygous recessive condition that affects 1 in 10,000 of the Hispanic population in the US, we can assume that the frequency of the recessive allele is q = √(1/10000) = 0.01.
To calculate the frequency of the dominant allele, we can use p = 1 - q = 1 - 0.01 = 0.99.
Now we can use the Hardy-Weinberg equation to calculate the frequencies of the different genotypes:
p² = (0.99)² = 0.9801 = 98.01% homozygous dominant
2pq = 2(0.99)(0.01) = 0.0198 = 1.98% heterozygous
q² = (0.01)² = 0.0001 = 0.01% homozygous recessive
To know more about natural selection, visit:
https://brainly.com/question/2725702
#SPJ1
What do you think is the relationship between the buoyant force and the weight of displaced liquid?
In light of this, the buoyant force and the liquid's displacement weight are equal.
What is meant by buoyant force?A fluid's buoyant force is the upward push it applies to an item. The buoyant force that is equal to the fluid's displacement weight is known as the Archimedes Principle.Here are a few instances where the buoyant force is present in daily life. A ship cruising the seas, a boat moving down a river, an iceberg floating in the water, a person wearing a life jacket, a balloon rising in the air, etc. The density has an impact on the buoyant force. When an object is fully or partially submerged in a fluid, buoyancy, also known as a buoyant force, is the propensity of the fluid to pull the object higher. A buoyant force is measured in Newtons in the S.I.To learn more about buoyant force, refer to:
https://brainly.com/question/17009786
Fish respiration and plant photosynthesis simulation
Photosynthesis, cellular respiration, and ecological output can all be studied using this program. Set the plant number to 0 to try the fish only. Set the fish to 0 to try only vegetation. Set the light level to 0 to monitor plant cellular respiration. The simulation will execute immediately whenever a variable is modified.
Aquatic plants, like land plants, engage in photosynthesis and internal metabolism. When marine autotrophs release oxygen as a result of photosynthesis, it dissolves in water. Dissolved oxygen can be detected directly to determine whether aquatic plants engage in photosynthesis or cellular respiration under various circumstances.
Finding a consistent supply of aquatic plants can be challenging because some species are only accessible periodically and others are invasive. As a result, for this novel exercise,We suggest Java moss (Vesicularia dubyana) or Christmas moss (Vesicularia montagnei), two watery aquaria-friendly aquatic bryophytes. As evidenced by our findings, Java moss experiences cellular respiration in the dark, resulting in a decrease in dissolved oxygen, and rapidly changes to photosynthesis when subjected to an LED or halogen plant light. Using this tough aquatic plant, students can simply adjust light levels to learn more about photosynthesis and cellular respiration.
Which statement would be MOST important to include in a summary of the article?
A
Models are used to represent objects and events in the real world.
B
Maps can be created on paper as well as digitally in people's phones.
C
Scales on maps use measurements in miles or kilometers.
D
Microscopes use lenses that bend light to make objects appear larger.
Answer:
D.) Microscopes use lenses that bend light to make objects appear larger.
Explanation:
I believe this is correct because it gives more detail in its sentence providing more information on a subject.
How was the dependent variable in the catalase experiment measured?
The rate of the reaction is the dependent variable. The concentrations of the enzyme, substrate, temperature and the presence of an inhibitor are the independent variables.
What is a catalase experiment?The impact of substrate concentration on reaction rate is investigated in this experiment. In a beaker containing hydrogen peroxide, porous filter paper discs are first dipped in a catalase solution. Oxygen bubbles begin as little ones and grow in size as the process progresses.Students can assess the effects of temperature and pH on the effectiveness of catalase using a typical enzyme lab. The enzyme catalase converts hydrogen peroxide (H2O2) into oxygen and water, and it is present in practically all living things. A common source of catalase used by educators is raw chicken liver or potato. By adding hydrogen peroxide to the bacteria, it is easy to detect whether they make catalase.To learn more about catalase experiment, refer to:
https://brainly.com/question/29770610
The T cell receptor (TCR) on T helper cells most likely recognizes:
A. short peptides inside a non-enzymatic protein.
B. long peptides inside an enzymatic protein.
C. short polysaccharides inside an enzymatic protein.
D. long-chain fatty acids inside a non-enzymatic protein.
Option A. The T cell receptor (TCR) on T helper cells most likely recognizes: short peptides inside a non-enzymatic protein.
What are T cell receptor (TCR)?The T cell receptor (TCR) on T helper cells most likely recognizes short peptides inside a non-enzymatic protein.
T helper cells play a critical role in the adaptive immune response, specifically by recognizing and responding to foreign antigens displayed on the surface of antigen-presenting cells (APCs). The TCR on T helper cells binds to antigenic peptides that are displayed on the major histocompatibility complex (MHC) molecules on the surface of APCs.
In general, the antigenic peptides recognized by TCRs are short peptides (usually 8-20 amino acids in length) that are derived from proteins that have been degraded within the APC. These peptides can come from non-enzymatic proteins or enzymatic proteins, but they are typically not long enough to constitute entire protein sequences.
Read more on T cell receptor (TCR) here:https://brainly.com/question/10476887
#SPJ1
Use Sammi's model as an example to explain why cells are the building blocks for human bodies.
Since each of a cell's various sections performs a particular job, cells serve as the fundamental units of the human body. The tiniest and most fundamental part of life is called a cell. To represent the various components of the circulatory system, the model uses everyday objects.
What is the circulatory system?The heart, blood vessels, and blood itself circulate throughout the entire body of a human or other vertebrate through the blood circulatory system. It contains the circulatory system, also known as the vascular system, which is made up of the heart and blood arteries. Blood veins in the circulatory system are responsible for moving blood away from and back toward the heart. Blood is transported away from the heart by arteries and returned via veins. Oxygen, nutrients, and hormones are delivered to cells by the circulatory system, which also eliminates wastes like carbon dioxide. Service for the body's cells is provided by the heart, blood, and blood vessels.Therefore,
As can be observed from the image, the heart, blood vessels, capillaries, and digestive tract are just a few of the components that are portrayed. This demonstrates how various organs have distinct duties to play in pumping blood into the body, just as different types of cells in the human body have various responsibilities to play.
To learn more about the circulatory system, refer to:
https://brainly.com/question/473969
PLEASE HELP! Thank you! Website doesn’t work
The Bacteria and what their features represent include bacillus ( rod shaped ), coccus ( spherical), spirillum ( spiral ), diplo ( pairs ), strepto (chains), and staphylo (clusters).
What are some types of bacteria ?There are various types of bacteria that occur in nature and some of them include:
bacillus - Rod-shaped bacteriacoccus - Spherical-shaped bacteriaspirillum - Spiral-shaped bacteriadiplo - Bacteria that occur in pairsstrepto - Bacteria that occur in chainsstaphylo - Bacteria that occur in clusters or groupsHow do Bacillus occur in nature?The bacteria in the diagram include:
Diagram 1: BacillusDiagram 2: DiplococcusDiagram 3: StreptococcusDiagram 4: CoccusDiagram 5: StreptococcusDiagram 6: BacillusDiagram 7: SpirillumDiagram 8: StaphylococcusDiagram 9: BacillusBacillus occurs in nature in various forms, including soil, water, and air. They are commonly found in soil, where they play a vital role in decomposing organic matter. Bacillus also occurs naturally in water, including freshwater and saltwater.
Some Bacillus species are known to survive extreme environmental conditions, including high temperatures, radiation, and desiccation, allowing them to exist in a dormant state for extended periods.
Learn more on bacteria types here: https://brainly.com/question/8695285
#SPJ1
Image transcribed:
Use the following website: http://biology.clc.uc.edu/courses/bio106/bacteria.htm or your notes to fill in the meaning of the term on the line next to the term.
1. bacillus
2. coccus
3. spirillum
4. diplo
5. strepto
6. staphylo
Use the terms you defined above to name the bacteria in each diagram below. Write the name on the line below each diagram. Note: Some names will combine two of the terms. For instance, a chain (strepto) of round (coccus) bacteria is called streptococcus.