A quantity of a monatomic ideal gas expands to twice the volume while maintaining the same pressure. If the internal energy of the gas were U0 before the expansion, what is it after the expansion?

The molarity of NaOH is 0.748 M.

To find the molarity of NaOH, we first need to use stoichiometry to determine the amount of NaOH that reacted with the [tex]H_2SO_4[/tex].

From the balanced chemical equation:

[tex]$H_2SO_4 + 2NaOH \rightarrow Na_2SO_4 + 2H_2O$[/tex]

we can see that one mole of [tex]H_2SO_4[/tex] reacts with two moles of NaOH.

Therefore, the number of moles of [tex]H_2SO_4[/tex] that reacted is:

[tex]$0.200 \frac{\text{mol}}{\text{L}} \times 0.131 \text{ L} = 0.0262 \text{ moles H}_2\text{SO}_4$[/tex]

Since the molar ratio of [tex]H_2SO_4[/tex] to NaOH is 1:2, the number of moles of NaOH that reacted is:

0.0262 moles [tex]H_2SO_4[/tex] x 2 moles NaOH/1 mole [tex]H_2SO_4[/tex] = 0.0524 moles NaOH

Now that we know the number of moles of NaOH that reacted, we can use the volume of NaOH and the number of moles of NaOH to calculate the molarity of NaOH:

Molarity of NaOH = moles of NaOH/volume of NaOH (in liters)

Volume of NaOH = 70.0 mL = 0.07 L

Molarity of NaOH = 0.0524 moles NaOH / 0.07 L = 0.748 M

To learn more about molarity

https://brainly.com/question/8732513

#SPJ4

In cyclohexane, a six-membered carbon ring, there are two different positions where hydrogen atoms can be found: axial and equatorial.

Axial Hydrogens (Ha): These hydrogens are positioned perpendicular or pointing up" or pointing down with respect to the plane of the cyclohexane ring. They extend above or below the ring structure. Equatorial Hydrogens (He): These hydrogens are positioned in the plane of the cyclohexane ring. They extend outward from the ring structure. To differentiate between axial and equatorial hydrogens in a cyclohexane molecule, you typically need to refer to the specific carbon atoms to which the hydrogens are attached.

Learn more about hydrogen here:

https://brainly.com/question/31018544

#SPJ11

When NaF is in aqueous solution it dissociates into ions and reacts with water forming NaOH and HF.

The solution would be a mixture of a strong base and a weak acid. Both of these substances contribute to the pH of the solution. We calculate pH as follows: Ka + Kb = 1x10^-14 Kb = 1x10^-14 - 3.5x 10 ^-5mKb = 6.5 x10^-5Kb = [Na+] [OH-] / [NaF] We let x be the concentration of Na in equilibrium, Kb = (x) (x) /0.22 6.5 x10^-5 = x^2 /0.22 x = 3.78x10^-3 = [OH]pOH = -log [OH] pOH = 2.42 pH + pOH = 14  pH = 14 - pOH  pH = 14 - 2.42 pH = 11.58

Therefore, the pH of the solution would be 11.58.

Learn more about concentration here:

https://brainly.com/question/12970323

#SPJ11

The value of Ka for the acid HA is 2.29 x 10⁻³. Hence, the correct answer is "Ka = 2.29 x 10⁻³".

Using the given equation, we can write the expression for Ka as:

Ka = [A-][H₃O⁺]/[HA]

We need to find the value of Ka for the acid HA, given that a 1.80 M solution of the acid has a pH of 1.200.

We know that pH = -log[H₃O+]. Therefore, [H₃O+] can be calculated as:

[H₃O+] = 10^(-pH) = 10^(-1.200) = 0.0630957 M

Since the acid HA is a monoprotic weak acid, the concentration of the conjugate base A- is equal to the concentration of the H₃O+ ions produced upon dissociation of HA. Therefore, [A-] = [H₃O+] = 0.0630957 M.

The initial concentration of HA is given as 1.80 M. We can assume that the change in the concentration of HA upon dissociation is small compared to the initial concentration, so we can use the approximation [HA] ≈ initial concentration.

Substituting the values in the expression for Ka, we get:

Ka = [A-][H₃O+]/[HA] = (0.0630957)^2/1.80 = 0.002289 = 2.29 x 10⁻³"

To learn more about acid HA refer here:

https://brainly.com/question/1512259#

#SPJ11

The least conductive 1.5 M solutions among the given options are b) Ethanol and c) Glucose, as they do not produce any ions in the solution.

To determine which 1.5 M solution will be the least conductive. The least conductive solutions will be those with the fewest ions since conductivity is dependent on the presence of ions in the solution. Here are the options:

a) Acetic acid - A weak acid that partially ionizes in water, producing some ions.
b) Ethanol - A non-electrolyte that does not ionize in water, producing no ions.
c) Glucose - A non-electrolyte that does not ionize in water, producing no ions.
d) Hydrochloric acid - A strong acid that completely ionizes in water, producing a large number of ions.

Considering the information above, the least conductive 1.5 M solutions among the given options are b) Ethanol and c) Glucose, as they do not produce any ions in the solution.

To know more about conductivity : https://brainly.com/question/1446556

#SPJ11

The resulting components that will participate in multiple equilibria when hydroxylapatite dissolves in aqueous acid are Ca2+ and HPO42-.

When hydroxylapatite dissolves in aqueous acid, it undergoes acid-base reactions that produce multiple species in solution. The dissolution can be represented by the following equation:

Ca10(PO4)6(OH)2(s) + 12H+ (aq) → 10Ca2+ (aq) + 6HPO42- (aq) + 2H2O(l)In this equation, the solid hydroxylapatite (Ca10(PO4)6(OH)2) reacts with 12 hydrogen ions (H+) from the aqueous acid to form 10 calcium ions (Ca2+), 6 hydrogen phosphate ions (HPO42-), and 2 water molecules (H2O).

To know more about hydroxylapatite visit:

https://brainly.com/question/14630752

#SPJ11

a. Since CoCl(s) is blue in color, the paper coated with cobalt chloride will appear blue under low humidity conditions.

b. Since CoCl2.6H2O(s) is pink in color, the paper coated with cobalt chloride will appear pink under high humidity conditions.

c. The product formed in the forward reaction is hydrated cobalt chloride, CoCl2.6H2O.

a) When the humidity is low (20%), there will be less water vapor in the air to react with the cobalt chloride. As a result, the equilibrium will shift to the left-hand side of the equation, favoring the formation of the anhydrous cobalt chloride (CoCl2) in the solid state. Since CoCl(s) is blue in color, the paper coated with cobalt chloride will appear blue under low humidity conditions.

b) When the humidity is high (80%), there will be more water vapor in the air to react with the cobalt chloride. As a result, the equilibrium will shift to the right-hand side of the equation, favoring the formation of the hydrated cobalt chloride (CoCl2.6H2O) in the solid state. Since CoCl2.6H2O(s) is pink in color, the paper coated with cobalt chloride will appear pink under high humidity conditions.

c) This compound contains six water molecules per formula unit of CoCl2 and is pink in color.

For more question on humidity click on

https://brainly.com/question/21494654

#SPJ11

To prepare a 0.500 M solution of KMnO4 with a volume of 2.00 L, a total of 3.16 grams of KMnO4 should be used.

The molarity (M) of a solution is defined as the number of moles of solute per liter of solution. To calculate the mass of KMnO4 required to prepare the given solution, we need to convert the volume of the solution to liters and then use the molarity formula.

Given:

Desired molarity (M) = 0.500 M

Desired volume (V) = 2.00 L

First, we rearrange the molarity formula to solve for moles:

moles = Molarity x Volume

moles = 0.500 M x 2.00 L = 1.00 mol

Next, we use the molar mass of KMnO4 to convert moles to grams:

Molar mass of KMnO4 = 39.10 g/mol (K) + 54.94 g/mol (Mn) + 4(16.00 g/mol) (O) = 158.04 g/mol

mass = moles x molar mass

mass = 1.00 mol x 158.04 g/mol = 158.04 g

Therefore, to prepare 2.00 L of a 0.500 M KMnO4 solution, approximately 3.16 grams of KMnO4 should be used.

Learn more about molarity here:

https://brainly.com/question/2817451

#SPJ11

The number 0.625 is a rational number.

A rational number is a number that can be expressed as a fraction, where both the numerator and the denominator are integers. In the case of 0.625, it can be written as 625/1000, which can be further simplified to 5/8. Since both 5 and 8 are integers, 0.625 is a rational number.

To determine if a decimal number is rational or irrational, we look for a pattern or repetition in the decimal representation. If the decimal terminates or repeats, it is a rational number. In the case of 0.625, it terminates after three decimal places, and it can be expressed as a fraction, meeting the criteria for a rational number.

To learn more about rational number click here : brainly.com/question/17450097

#SPJ11

there are approximately 1.91 x 10^24 molecules in 450 grams of Na2SO4.To determine the number of molecules in 450 grams of Na2SO4, we need to use the concept of Avogadro's number and the molar mass of Na2SO4.

The molar mass of Na2SO4 can be calculated by adding up the atomic masses of its constituent elements:

Na (sodium) = 22.99 g/mol
S (sulfur) = 32.07 g/mol
O (oxygen) = 16.00 g/mol

Molar mass of Na2SO4 = 2(22.99 g/mol) + 32.07 g/mol + 4(16.00 g/mol) = 142.04 g/mol

Now, we can calculate the number of moles in 450 grams of Na2SO4 using the formula:

moles = mass (in grams) / molar mass

moles = 450 g / 142.04 g/mol ≈ 3.17 moles

Finally, we can use Avogadro's number, which states that there are 6.022 x 10^23 molecules in one mole of a substance, to calculate the number of molecules:

number of molecules = moles x Avogadro's number

number of molecules = 3.17 moles x 6.022 x 10^23 molecules/mol ≈ 1.91 x 10^24 molecules

Therefore, there are approximately 1.91 x 10^24 molecules in 450 grams of Na2SO4.

 To  learn  more  about moles click here:brainly.com/question/15209553

#SPJ11

When calcium ions (Ca²⁺) move out of a neuron, they carry positive charges with them. As a result, the area outside the neuron, where the calcium ions are moving to, would experience a net loss of positive charge. Therefore, the overall charge outside C. the neuron would become more negative.

An atom consists of protons, neutrons, and electrons. Protons carry a positive electric charge, electrons carry a negative electric charge, and neutrons have no net electric charge. The charge of a proton is +1, the charge of an electron is -1, and the charge of a neutron is 0.

Neutrons are subatomic particles found in the nucleus of an atom along with protons. Protons have a positive charge and help determine the atomic number and identity of the element, while neutrons have no charge.

Learn more about the charge of neutron: https://brainly.com/question/29771588

#SPJ11

Adol condensations with ketones can indeed occur under acidic conditions.Therefore, the choice of acid, solvent, and temperature is crucial for the success of the reaction.

Adol condensations are reactions in which two carbonyl compounds (aldehydes or ketones) react to form a β-hydroxy carbonyl compound. These reactions are usually catalyzed by a base, which abstracts a proton from the carbonyl compound and activates the carbonyl group for nucleophilic attack. However, under acidic conditions, the mechanism of the reaction is different. In this case, the acid protonates the carbonyl compound, which makes it more electrophilic and prone to nucleophilic attack by the enolate formed from the other carbonyl compound. This leads to the formation of the β-hydroxy carbonyl compound.

In the case of acidic conditions, the reaction mechanism involves protonation of the carbonyl group of the ketone, followed by the nucleophilic attack of the enol or enolate ion. The resulting intermediate then undergoes dehydration to yield the final product, a conjugated enone.

To know more about acidic visit:

https://brainly.com/question/14072179

#SPJ11

The molar mass of tantalum is approximately 180.94 g/mol.

To convert moles to grams, we can use the following formula:

mass (g) = moles × molar mass

Thus,

mass = 23 mol × 180.94 g/mol = 4160.62 g

Therefore, 23 moles of tantalum is approximately 4160.62 grams.

To know more about tantalum refer here

https://brainly.com/question/24198197#

#SPJ11

The chemical species most likely to undergo chemistry with hydroxide (OH⁻) is phosphate.

This is because hydroxide ion (OH⁻) has a negative charge and phosphate ion (PO₄)³⁻ has a positive charge. Opposite charges attract each other and therefore, phosphate ion is attracted towards hydroxide ion. The reaction between hydroxide and phosphate ions forms a strong base called sodium phosphate, which is used in many industrial processes. Sulfate, chlorine, carbonate, bromine, iodine, and lead do not have a positive charge, and therefore, they are less likely to undergo a reaction with hydroxide ions.

Therefore, out of the given options, phosphate is the chemical species that is most likely to undergo chemistry with hydroxide (OH⁻).

Learn more about hydroxide at https://brainly.com/question/21393201

#SPJ11

There are approximately 3.59 moles of Li in 25.0g. ( Divide the mass of Li by its molar mass to find moles.)


To determine the number of moles in the given equation, we need to divide the mass of Li (25.0g) by its molar mass (6.94g/mol). This calculation gives us:

Number of moles = Mass of Li / Molar mass of Li
                = 25.0g / 6.94g/mol
                ≈ 3.59 moles

Therefore, there are approximately 3.59 moles of Li in 25.0g.

This calculation is based on the concept of molar mass, which represents the mass of one mole of a substance. In this case, the molar mass of Li is 6.94g/mol.
By dividing the given mass of Li (25.0g) by its molar mass, we convert the mass into moles. This conversion allows us to compare the quantity of a substance on a consistent basis, irrespective of the sample's mass.

To Learn more about molar mass click here
brainly.com/question/31545539

#SPJ11

Ni(g) → Ni⁺(g) + e⁻, Ni⁺(g) → Ni²⁺(g) + e⁻; phases represented as (g) for gaseous state.

Nickel is a transition metal with an atomic number of 28. The first two ionization energies of nickel can be expressed by the following chemical equation:

Ni(g) → Ni⁺(g) + e⁻ (first ionization energy)

Ni⁺(g) → Ni²⁺(g) + e⁻ (second ionization energy)

In the first ionization energy, one electron is removed from the neutral nickel atom to form a singly charged nickel ion. In the second ionization energy, an additional electron is removed from the nickel ion to form a doubly charged nickel ion.

The phases of nickel in this chemical equation are represented as (g), which stands for gaseous state. This indicates that the first and second ionization energies of nickel are measured in the gas phase.

The first ionization energy of nickel is 7.64 eV, and the second ionization energy of nickel is 18.17 eV. These values indicate that it requires more energy to remove a second electron from the Ni⁺ ion than to remove the first electron from the neutral Ni atom.

This is due to the stronger electrostatic attraction between the positively charged Ni²⁺ ion and the remaining electron, compared to the attraction between the positively charged Ni⁺ ion and the remaining electron in the first ionization energy.

For more question on gaseous  visit:

https://brainly.com/question/1776161

#SPJ11

The percent ionization of a 0.155 M solution of acetic acid, HC₂H₃O₂, with a Ka of 1.76 x 10^-5 is 1.57%.

Acetic acid is a weak acid, meaning it does not completely ionize in solution. The Ka value represents the acid dissociation constant, which is the equilibrium constant for the dissociation reaction of the acid. To calculate the percent ionization, we need to determine the concentration of H+ ions that have been formed from the dissociation of the acid. Using the Ka value and the initial concentration of the acid, we can calculate the concentration of H+ ions at equilibrium.

The percent ionization is then calculated as the concentration of H+ ions divided by the initial concentration of the acid, multiplied by 100. In this case, the percent ionization is found to be 1.57%. This indicates that only a small fraction of the acid molecules have dissociated into ions, and the majority of the acid remains in its molecular form in solution.

To learn more about percent ionization here

https://brainly.com/question/14225136

#SPJ4

Air pressure is influenced by various factors such as weather patterns, elevation, and atmospheric conditions, which can vary greatly between different locations and change over time.

To obtain the air pressure readings for a particular day, I would recommend checking reliable weather sources or using weather apps or websites that provide up-to-date atmospheric pressure data. These sources often provide current weather conditions, including air pressure, for various cities around the world.

Additionally, it is worth noting that air pressure readings are typically given in units of hectopascals (hPa) or millibars (mbar) rather than meters of barometric pressure (mB). The standard atmospheric pressure at sea level is approximately 1013.25 hPa or 1013.25 mbar, so finding a precise value of exactly 1012 mB might be uncommon.

Learn more about atmospheric conditions here

https://brainly.com/question/24747263

#SPJ11

To convert 3-methyl-2-butanol into 3-methyl-1-butanol, we can use an oxidation-reduction reaction. First, we will oxidize the alcohol group on the second carbon of 3-methyl-2-butanol to a ketone using a mild oxidizing agent such as chromic acid. The resulting compound will be 3-methyl-2-butanone.

Next, we will reduce the ketone on the second carbon of 3-methyl-2-butanone to an alcohol using a reducing agent such as sodium borohydride or lithium aluminum hydride. The final product will be 3-methyl-1-butanol, with the alcohol group now located on the first carbon.
Overall, the synthetic route to convert 3-methyl-2-butanol to 3-methyl-1-butanol is as follows:
3-methyl-2-butanol → 3-methyl-2-butanone (oxidation using chromic acid) → 3-methyl-1-butanol (reduction using NaBH4 or LiAlH4)
To convert 3-methyl-2-butanol into 3-methyl-1-butanol, you can follow this synthetic route:
1. First, perform an acid-catalyzed dehydration of 3-methyl-2-butanol to form a double bond, creating 3-methyl-2-butene.
2. Next, perform hydroboration-oxidation on 3-methyl-2-butene. Use borane (BH3) as the boron source and hydrogen peroxide (H2O2) as the oxidizing agent. This will add a hydroxyl group across the double bond, forming 3-methyl-1-butanol as the final product.

To know more about oxidation-reduction visit:

https://brainly.com/question/3867774

#SPJ11

The velocities of heavy gas molecules are generally slower than those of light gas molecules at a given temperature. This is because the average kinetic energy of gas molecules is proportional to their temperature and inversely proportional to their mass.

Since heavy gas molecules have greater mass, they have a lower average kinetic energy at a given temperature compared to lighter gas molecules. Therefore, heavy gas molecules tend to move more slowly than lighter gas molecules at the same temperature.

However, it is important to note that the actual velocities of gas molecules can vary greatly depending on factors such as temperature, pressure, and the type of gas involved.

To know more about the velocities refer here :

https://brainly.com/question/16809028#

#SPJ11

The theoretical yield of water is 8.14 grams. To find the theoretical yield of water, we first need to balance the chemical equation for the combustion of propane (C3H8) with oxygen (O2) to form carbon dioxide (CO2) and water (H2O).

To determine the theoretical yield of water from 5 grams of C3H8 and 20 grams of O2, you need to follow these steps:
1. Write the balanced chemical equation: C3H8 + 5O2 → 3CO2 + 4H2O

2. Convert grams to moles: - For C3H8: 5 g / (44.1 g/mol) = 0.113 mol - For O2: 20 g / (32.0 g/mol) = 0.625 mol
3. Determine the limiting reactant:  - O2 requirement for complete combustion of C3H8: 0.113 mol C3H8 x (5 mol O2 / 1 mol C3H8) = 0.565 mol O2 Since 0.565 mol O2 is required and there is 0.625 mol O2 available, O2 is in excess and C3H8 is the limiting reactant.
4. Calculate the theoretical yield of water: - 0.113 mol C3H8 x (4 mol H2O / 1 mol C3H8) = 0.452 mol H2O
- Convert moles of H2O to grams: 0.452 mol H2O x (18.0 g/mol) = 8.14 g H2O

To know more about combustion  visit :-

https://brainly.com/question/30794605

#SPJ11

The jump rate at 750°C is approximately [tex]1.84×10^24 jumps/s[/tex].

To calculate the jump rate at 750°C, we can use the Arrhenius equation:

[tex]k = A * exp(-Ea/RT)[/tex]

where k is the rate constant, A is the frequency factor, Ea is the activation energy, R is the gas constant (8.314 J/(mol·K)), and T is the temperature in Kelvin.

We are given that at 400°C, the jump rate is 5×10^5 jumps/s and the activation energy is 30,000 cal/mol. We need to find the jump rate at 750°C.

First, we need to convert the activation energy from calories per mole to joules per mole:

Ea = 30,000 cal/mol * 4.184 J/cal = 125,520 J/mol

Next, we need to convert the temperatures to Kelvin:

T1 = 400°C + 273.15 = 673.15 K

T2 = 750°C + 273.15 = 1023.15 K

Now we can use the Arrhenius equation to find the new jump rate:

[tex]k2 = A * exp(-Ea/RT2)[/tex]

We can solve for A by using the jump rate at 400°C:

[tex]5×10^5 jumps/s = A * exp(-Ea/RT1)[/tex]

[tex]A = 5×10^5 jumps/s * exp(Ea/RT1) = 5×10^5 jumps/s * exp(125,520 J/mol / (8.314 J/(mol·K) * 673.15 K)) = 6.95×10^12[/tex]

Now we can plug in A and the new temperature into the Arrhenius equation:

[tex]k2 = 6.95×10^12 * exp(-125,520 J/mol / (8.314 J/(mol·K) * 1023.15 K)) = 1.84×10^24[/tex]

Therefore, the jump rate at 750°C is approximately 1.84×10^24 jumps/s.

To know more about Arrhenius equation refer here

https://brainly.com/question/12907018#

#SPJ11

The correct option is:
d. Electrolysis of molten NaCl produces Na(s) and Cl2(g), whereas electrolysis of aqueous NaCl produces H2(g) and Cl2(g).

The difference in the products obtained when molten and aqueous NaCl are electrolyzed is due to the different states of matter of the NaCl. When NaCl is molten, it is in a liquid state, which means the ions are free to move and conduct electricity. Therefore, electrolysis of molten NaCl produces hydrogen gas and chlorine gas. On the other hand, when NaCl is dissolved in water to form aqueous NaCl, it is in a different state of matter where the ions are surrounded by water molecules and do not have the same freedom of movement. Electrolysis of aqueous NaCl produces sodium metal and chlorine gas instead of hydrogen gas, because water is oxidized instead of chloride ions. Overall, the different products obtained are due to the difference in the electrolysis process and the state of matter of NaCl.
Different products are obtained when molten and aqueous NaCl are electrolyzed because of the presence of water in the aqueous solution.

To know more about Electrolysis visit:

https://brainly.com/question/12994141

#SPJ11

We need to add 1.2 L of water to 100 mL of 18 M sulfuric acid to prepare a 1.5 M solution.

To prepare a 1.5 M solution of sulfuric acid from 18 M sulfuric acid, we need to dilute the concentrated acid by adding water. The amount of water required can be calculated using the formula:

M1V1 = M2V2

where M1 is the initial concentration of the acid (18 M), V1 is the initial volume of the acid (100 mL), M2 is the final concentration of the diluted solution (1.5 M), and V2 is the final volume of the diluted solution (unknown).

Substituting the values into the formula, we get:

(18 M) x (100 mL) = (1.5 M) x (V2)

Solving for V2, we get:

V2 = (18 M x 100 mL) / 1.5 M

V2 = 1200 mL or 1.2 L

Therefore, we need to add 1.2 L of water to 100 mL of 18 M sulfuric acid to prepare a 1.5 M solution.

To know more about sulfuric acid refer here

https://brainly.com/question/29303579#

#SPJ11

None of the given aldehydes would produce glycine using a Strecker synthesis. A Strecker synthesis is a method used to synthesize amino acids from aldehydes or ketones.

The reaction involves the condensation of an aldehyde or ketone with ammonium chloride and potassium cyanide, followed by hydrolysis to yield the corresponding amino acid.

However, only aldehydes or ketones that contain at least one α-hydrogen atom can undergo this reaction. Among the given options, only propanal and butanal have α-hydrogen atoms, but they would not produce glycine in a Strecker synthesis.

Glycine is the simplest amino acid and has a carboxyl group and an amino group attached to the same carbon atom, which cannot be formed from the given aldehydes using the Strecker synthesis.

To know more about aldehydes refer here :-

https://brainly.com/question/30459994#

#SPJ11

The half-life of the reaction is approximately 461.63 seconds.

To determine the rate constant and half-life of a first-order reaction, we

can use the following equations:

For a first-order reaction:

           ln(A₀/A) = kt

Where:

We are given the following information:

Let's assume A₀ is 1 (since it's a ratio, it doesn't affect the calculations).

The equation becomes:

       ln(1/45) = k * 65

Now we can solve for k:

ln(1/45) = k * 65

k * 65 = ln(45)

k = ln(45) / 65

Using a calculator, we find k = -0.00150 s⁻¹ (rounded to five decimal places).

The rate constant (k) for the reaction is approximately -0.00150 s⁻¹.

Now, let's calculate the half-life (t₁/₂) of the reaction. The half-life is the

time it takes for the reactant concentration to decrease to half of its initial

value.

For a first-order reaction, the half-life is given by the equation:

                                t₁/₂ = ln(2) / k

Plugging in the value of k we calculated earlier:

t₁/₂ = ln(2) / (-0.00150)

t₁/₂ = 461.63 s (rounded to two decimal places)

To know more about half-life refer here

https://brainly.com/question/31666695#

#SPJ11

Therefore, the answer is (c) 0.0228.

The ka value for an acid is a measure of its strength, and it is calculated using the equilibrium concentrations of the acid and its conjugate base. In this case, the given equilibrium concentrations for the acid ha and its conjugate base a- are [ha]=1.65 M and [a-]=0.0971 M, respectively.

The concentration of the hydronium ion, H3O+, is also given as 0.388 M.
The balanced chemical equation for the dissociation of the acid ha is:
ha + H2O ⇌ H3O+ + a-
The equilibrium constant expression for this reaction is:
ka = [H3O+][a-]/[ha]
Substituting the given equilibrium concentrations into this expression, we get:
ka = (0.388 M)(0.0971 M)/(1.65 M)
Simplifying this expression, we get:
ka = 0.0228
For more such question on strength

https://brainly.com/question/27573138

#SPJ11

Hypothermia and a low pH would impair the activity of salivary amylase. The enzyme's catalytic function would be significantly reduced, leading to a decrease in its ability to break down starches in the mouth.

If someone had hypothermia and their body temperature dropped to 65°F, and their pH dropped to 3-4, the enzyme salivary amylase would experience significant changes in its activity. The enzyme's optimal temperature and pH are crucial for its proper functioning, and deviations from these optimal conditions can have detrimental effects.

At a temperature of 65°F, which is significantly lower than the enzyme's optimum of 98.6°F, the activity of salivary amylase would be greatly reduced. Enzymes generally work best within a specific temperature range, and extreme deviations from the optimum can cause the enzyme to become less effective or even inactive. The lower temperature would slow down the enzyme's catalytic activity, resulting in a decrease in its ability to break down starches into smaller sugar molecules.

Similarly, a pH of 3-4, which is significantly lower than the enzyme's optimum pH of 6-7, would also negatively impact the enzyme's activity. Salivary amylase functions optimally in a slightly acidic to neutral pH range. A pH that is too acidic would disrupt the enzyme's structure and affect its ability to bind to its substrate and catalyze the reaction efficiently.

To lean more about Hypothermia  click here : brainly.com/question/6552936

#SPJ11

There are approximately 22.05 moles of Kr in a 6.14 L sample at the same temperature and pressure.

To determine the number of moles of Kr in a 6.14 L sample at the same temperature and pressure, we can use the relationship between moles, volume, and pressure, which is constant for a given gas under the same conditions. In this case, we have:
Initial moles (n1) = 2.21 mol
Initial volume (V1) = 615 mL = 0.615 L
Final volume (V2) = 6.14 L
Since the temperature and pressure remain constant, the ratio of moles to volume is also constant. Therefore, we can set up the equation:
n1 / V1 = n2 / V2
Solving for the final moles (n2):
n2 = (n1 * V2) / V1
n2 = (2.21 mol * 6.14 L) / 0.615 L
n2 ≈ 22.05 mol
So, there are approximately 22.05 moles of Kr in a 6.14 L sample at the same temperature and pressure.

To know more about moles visit :

https://brainly.com/question/30759206

#SPJ11

The vapor pressure of octane at 38 degrees Celsius is approximately 27.59 torr.

To calculate the vapor pressure of octane at 38 degrees Celsius, we need to use the Clausius-Clapeyron equation:
ln(P2/P1) = -ΔHvap/R * (1/T2 - 1/T1)

P1 and T1 are the known vapor pressure and temperature, P2 is the vapor pressure at 38 degrees Celsius (which we want to find), T2 is the temperature in Kelvin (which is 38 + 273.15 = 311.15 K), ΔHvap is the heat of vaporization
ln(P2/13.95 torr) = -40 kJ/mol / (8.314 J/(mol*K)) * (1/311.15 K - 1/298.15 K)
Simplifying this equation:
ln(P2/13.95 torr) = -4813.85
Now we can solve for P2 by taking the exponential of both sides:
P2/13.95 torr = e^(-4813.85)
P2 = 2.382 torr
The vapor pressure of octane at 38 degrees Celsius is approximately 2.382 torr.
ln(P2/P1) = -(ΔHvap/R)(1/T2 - 1/T1)
P2 = ? at T2 = 38°C = 311.15 K
ΔHvap = 40 kJ/mol = 40,000 J/mol
Now, we can plug in the values and solve for P2:
ln(P2/13.95) = -(40,000 J/mol)/(8.314 J/mol·K)(1/311.15 K - 1/298.15 K)
ln(P2/13.95) = -1.988
Now, exponentiate both sides to solve for P2:
P2 = 13.95 * e^(-1.988) = 27.59 torr (rounded to two decimal places)

To know more about vapour pressure visit:-

https://brainly.com/question/2693029

#SPJ11