A rectangle has a length of (x+4)cm and a width of (3x-1)cm. It’s perimeter is 78cm
Calculate the value of x

Given the data in the question we calculate that the package is delivered at 18:44.

If the package is collected at 15:39 and delivered 3 hours and 25 minutes later, we can add that amount of time to the collection time to find the delivery time.

First, we need to convert 3 hours and 25 minutes to just minutes. To do this, we multiply 3 by 60 (to convert hours to minutes) and then add 25:

3 hours and 25 minutes = (3 × 60) + 25 = 185 minutes

Now we can add 185 minutes to the collection time of 15:39:

15:39 + 185 minutes = 18:44

Therefore, the package is delivered at 18:44. The delivery time of a package is the time it takes for the package to be transported from the sender to the receiver. In this case, the package was collected at 15:39 and delivered 3 hours and 25 minutes later. To find the delivery time, we added the duration of 3 hours and 25 minutes to the collection time. It is important to keep track of delivery times to ensure timely and efficient shipping, especially for time-sensitive or perishable items. Timely delivery is crucial for businesses that rely on shipping to meet customer expectations and maintain customer satisfaction.

To learn more about amount of time click here

brainly.com/question/29823316

#SPJ4

The exponential equation that fits the provided point distribution is [tex]y = 5(2)^x[/tex] . Thus, option A is correct.

An exponential equation is one in which the exponent contains a variable.

For instance, the exponential equation [tex]y = 5x[/tex] has the variable x as the exponent (also known as "5 to the power of x"),

whereas, the exponential equation y = x5 has the number 5 as the exponent instead of a variable, making the latter equation not exponential.

If we calculate the initial differences, we can determine the exponential equation that corresponds to the given pattern of points as follows:

[tex](2-1) = 5[/tex]

[tex](3-2) = 10[/tex]

[tex](4-3) = 20[/tex]

If we calculate the second differences, we obtain:

[tex](10-5) = 5[/tex]

[tex](20-10) = 10[/tex]

The fact that the second differences are constant shows that the exponential equation's coefficient is 5.

Therefore, The exponential equation that fits the provided point distribution is [tex]y = 5(2)^x[/tex] .

Learn more about exponential here:

https://brainly.com/question/29506679

#SPJ1

Based on the information given, the college administrator has collected a sample of n=100 students and obtained the following statistics: Mean: 7.4 hours per week Standard deviation: 3 hours

Why it is?

These statistics can be used to estimate the average amount of time that all students spend on homework assignments during a typical week, as well as to assess the variability in the data.

To estimate the population mean, the sample mean can be used as an unbiased estimator. This means that the sample mean of 7.4 hours per week is likely a good estimate of the true population mean. However, there is always some uncertainty associated with this estimate due to the fact that it is based on a sample.

To quantify the variability in the data, the standard deviation can be used. A standard deviation of 3 hours indicates that there is a relatively large amount of variability in the amount of time that students spend on homework assignments. Some students may spend significantly more or less time on homework than the average of 7.4 hours per week.

Overall, the college administrator can use this information to gain insights into the amount of time that students spend on homework assignments and to make informed decisions based on this knowledge.

To know more about Statistics related questions, visit:

https://brainly.com/question/29093686

#SPJ1

By using Euler's method with a step size of 0.2, we estimate that y(1) = 4.5429.

The Euler's method is used to estimate a numerical solution of a first-order differential equation. The formula of Euler's method is given by:

y_1 = y_0 + hf(x_0, y_0)

Where: y_1 is the next value of y after one iterationy

0 is the initial value of yy' = f(x, y)h is the step size

This method is an iterative procedure that advances the estimate of y by one step by approximating the curve using a tangent line at each point along the curve.

Given that y(0) = 4 and h = 0.2, we can use Euler's method to estimate y(1) where y(x) is the solution of the initial-value problemy' = x2 + xy, y(0) = 4

Using Euler's method with a step size of 0.2, we get:

1) When x = 0, y = 4

y_1 = y_0 + hf(x_0, y_0) = 4 + 0.2(0 + 4(0))= 4.02

When x = 0.2, y = 4.02

y_2 = y1 + hf(x_1, y_1) = 4.02 + 0.2(0.2^2 + 0.2(4.02))= 4.10523

When x = 0.4, y = 4.1052

y_3 = y_2 + hf(x_2, y_2) = 4.1052 + 0.2(0.4^2 + 0.4(4.1052))= 4.1994144

When x = 0.6, y = 4.1994

4 = y_3 + hf(x_3, y_3) = 4.1994 + 0.2(0.6^2 + 0.6(4.1994))= 4.3032545

When x = 0.8, y = 4.3033

y_5 = y_4 + hf(x_4, y_4) = 4.3033 + 0.2(0.8^2 + 0.8(4.3033))= 4.4174496

When x = 1, y = 4.4174

y_6 = y_5 + hf(x_5, y_5) = 4.4174 + 0.2(1^2 + 1(4.4174))= 4.5429404

Therefore, using Euler's method with a step size of 0.2, we estimate that y(1) = 4.5429 (rounded to four decimal places).

To know more about Euler's method: https://brainly.com/question/14286413

#SPJ11

The value of x for the given tangent line is 13 cm.

An extended straight line that intersects only one point on a curve and nowhere else is called a tangent. A circle's tangent is always perpendicular to its radius.

Here, two tangents to the same circle, A (x) and B (13), are subtended from two points on the circle.

So, if two tangents are drawn from a point outside the circle, they will both have the same length when they reach the point of contact inside the circle.

The two tangents in this instance have the same outside point of origin. Thus, based on the above calculation, x = 13 cm.

Hence, the value of x for the given tangent line is 13 cm.

Learn more about tangent lines here:

https://brainly.com/question/28385264

#SPJ1

Answer: 10:3

Step-by-step explanation: convert 600cm to 6m, then we will get 20m:6m, 2*10=20 and 2*3=6. then it will become 10:3

The graph of Y=-2x+4 should look like a downward sloping line that intersects the y-axis at 4.

The term "intersect" typically refers to the point or points where two or more things, such as lines, curves, sets, or geometrical shapes, meet or cross each other. The intersection can be described as the common elements or properties shared by the different objects or sets that intersect.

The graph of the equation Y=-2x+4 is a straight line with a slope of -2 and a y-intercept of 4. To graph this equation, you can use the slope-intercept form y = mx + b, where m is the slope and b is the y-intercept.

To graph Y=-2x+4, follow these steps:

The graph of Y=-2x+4 should look like a downward sloping line that intersects the y-axis at 4.

To know more about intersect visit:

https://brainly.com/question/14217061

#SPJ1

Answer:

Step-by-step explanation:

Overtime Rate = [tex]17.70 \times 1\frac{1}{2}[/tex]

                        [tex]= 17.70 \times \frac{3}{2}[/tex]

                       [tex]=\frac{53.10}{2}[/tex]

                      [tex]=\pounds26.55[/tex]

Pay [tex]=11*26.55=\pounds 292.05[/tex]    (I assume you can use a calculator for this)

Solution: [tex]\pounds 292[/tex]

The total resistance of the circuit is  6 + 2i.

Resistance is a unit of measurement for the resistance to current flow in an electrical circuit. The Greek letter omega () represents the unit of measurement for resistance, which is ohms.

Georg Simon Ohm (1784–1854), a German physicist who investigated the connection between voltage, current, and resistance, is the name given to the unit of resistance known as an ohm.

The amount of opposition any object applies to the flow of electric current is known as resistance. A resistor is an electrical component utilised in the circuit to provide that particular level of resistance. R = V I is a formula used to calculate an object's resistance.

given :

R1 =  (4 + 6i)

R2 = (2 - 4i)

total resistance of the circuit is

R = R1 + R2

= (4 + 6i) + (2 - 4i)

= 6 + 2i

To know more about resistance , click the below link

https://brainly.com/question/30799966

#SPJ4

The equation RT = + R1 = 4 + 6i ohms and R2 = 2 4i ohms, RT = 6 - 2i ohms, determines the circuit's total resistance.

R1 and R2 are added to determine RT: RT = R1 + R2.

The actual components added together give us 4 + 2 = 6.

When we add the fictitious parts, we obtain 6i - 4i = 2i.

RT is thus equal to 6 - 2i ohms.

To put it another way, the circuit's total resistance is a complex number containing a real component of 6 ohms and an imaginary component of -2 ohms. This shows the combined impact of the circuit's resistances R1 and R2. When a constant voltage differential of one volt (V) is supplied to two conductor points and a current of one ampere (A) results, the resistance between those points is measured in ohms. It is comparable to one volt for every ampere (V/A), to put it simply.

learn more about ohms here:

https://brainly.com/question/29750972

#SPJ4

Step-by-step explanation:

9+8=17

for ratio 9: 9/17 * 450=R238.24

for ratio 8: 8/17* 450= R211.17

The evaluation of the expression -0.25 + 0.3 - ( - 3/10 ) + 1/4 is 3 / 5.

An algebraic expression is made up of variables and constants, along with algebraic operations such as addition, subtraction, division, multiplication etc.

To evaluate an algebraic expression means to find the value of the expression when the variable is replaced by a given number.

Therefore, let's solve the expression as follows:

-0.25 + 0.3 - ( - 3/10 ) + 1/4

let's convert it to fraction

- 1 / 4 + 3 / 10 + 3 / 10 + 1 / 4

Hence,

3 / 10 + 3 / 10 +  1 / 4  - 1 / 4

3 + 3 / 10

6 / 10 = 3 / 5

learn more on expression here: https://brainly.com/question/24178125

#SPJ1

Grade g1 = 3.50% Grade g2 = -2.50% Design speed = 65 mph. The minimum length the curve must have, to comply with stopping sight distance requirements? The minimum length the curve must have, to comply with stopping sight distance requirements is 196.5 ft or 59.88 m.

`Stopping Sight Distance (SSD) The stopping sight distance (SSD) is the minimum distance a vehicle operator needs to be able to see ahead of the vehicle to bring it to a stop before colliding with an object in its path.The minimum stopping sight distance is given by the following equation: SSD = 0.278Vt + V^2/254f + 1.47W. Where,SSD = stopping sight distance, Vt = total stopping distance, V = design speed, W = width of traveled way, and f = friction factor.To comply with stopping sight distance requirements, the stopping sight distance (SSD) must be equal to or greater than the minimum SSD. K-tables for 0% can be used to determine the minimum SSD. Minimum SSD = SSD min = K x V. Where, SSD min = minimum stopping sight distance, V = design speed, K = adjustment factor from the table. We need to find the minimum length of the curve that meets the stopping sight distance requirements.Here, it is required to design a curve that is the combination of two tangents with an intersection angle of 60° and a length sufficient to maintain an SSD value equal to or greater than the minimum value.Curve length formula:L = (a+b)/sin(θ/2)Where,L = length of curve, a = length of first tangent, b = length of second tangent, and θ = intersection angle L = (a + b) / sin (θ / 2)L = (V^2 / 254f x (Kg1 + Kg2) ) / sin (θ / 2)Length of first tangent, a = V x (1.47 + 0.278Kg1) Length of second tangent, b = V x (1.47 + 0.278Kg2) Intersection angle θ = 60° Friction factor f = 0.35 (for asphalt surface)The adjustment factor from the table for 0% = 0.03. So, we have:Length of first tangent, a = 1.47 x 65 + 0.278 x 65 x 3.5. Length of first tangent, a = 113.1. Length of second tangent, b = 1.47 x 65 + 0.278 x 65 x (-2.5). Length of second tangent, b = 105.9L = (V^2 / 254f x (Kg1 + Kg2) ) / sin (θ / 2)L = (65^2 / (254 x 0.35 x (0.03 x (3.5 + (-2.5))))) / sin (60 / 2)L = 196.5 ft = 59.88 m.

For more questions on stopping sight distance

https://brainly.com/question/2444691

The probability that no numbers are repeated = [tex]\frac{720}{1000}=0.72[/tex]

The probability that there are no repeated digits in a 3-digit pin number is 0.72.

Formula used:

[tex]P(n,r)=\frac{n!}{(n-r)!}\\ Probability=\frac{Number of favourable outcomes}{Total number of events in the samples pace}[/tex]

There are 10 digits (0,1,2,3,4,5,6,7,8,9) to choose from.

Therefore, the total number of possible 3-digit pin numbers with no repeated digits is

[tex]P(10,3)=\frac{10!}{(10-3)!}\\P(10,3)= \frac{10!}{7!}\\P(10,3)=720[/tex]

The total number of possible 3-digit pin numbers [tex]= 10 * 10 * 10 = 1000[/tex].

Thus, the probability that no numbers are repeated = [tex]\frac{720}{1000}=0.72[/tex]

Therefore, the probability that there are no repeated digits in a 3-digit pin number is 0.72.

Learn more about probability below

https://brainly.com/question/13604758

The value of x that makes the average between 3.15 and x equal to 40 is 76.85.

In this problem, we are given two numbers, 3.15 and x, and told that the average between them is 40. We can set up an equation to solve for x as follows:

(3.15 + x) / 2 = 40

To find the average between 3.15 and x, we add the two numbers together and divide by 2, which gives us the equation above.

To solve for x, we can start by multiplying both sides of the equation by 2:

3.15 + x = 80

Next, we can subtract 3.15 from both sides of the equation:

x = 76.85

To know more about average here

https://brainly.com/question/16956746

#SPJ4

In the following question, among the conditions given,To determine the total number of ways five people, A, B, C, D, and E, can line up with the condition that A and B must stand next to each other since they are a couple, we can apply the concept of "permutations." option A, 48, is the correct answer.

Permutations refer to the number of ways that objects can be arranged in a particular order. It is calculated using the formula P(n, r) = n!/(n-r)!, where n represents the total number of objects and r represents the number of objects to be arranged. According to the question, A and B must stand next to each other, so they can be treated as a single entity. Therefore, we have four entities: AB, C, D, and E. We can arrange these four entities in 4! = 24 ways. However, A and B can switch positions among themselves, so each of these 24 arrangements can be arranged in 2 ways. Thus, the total number of ways that five people, A, B, C, D, and E, can line up with the condition that A and B must stand next to each other is 24 × 2 = 48 ways. Therefore, option A, 48, is the correct answer.

For more such questions on permutations

https://brainly.com/question/1216161

#SPJ11

The slope of this firm's isoquant when L = 100 and K = 50 is -0.50.

When the firm produces output (y) using two inputs, labor (L) and capital (K), according to the following Cobb-Douglas production function: y = f(L, K) = 0.25 K0.75, the slope of this firm's isoquant when L = 100 and K = 50 is equal to -0.50.What is an isoquant?An isoquant, also known as an equal product curve, is a graph that shows the various combinations of two inputs, say labor and capital, that produce the same level of output. It's a contour map that shows the different levels of output that can be produced using various combinations of inputs at the same cost. The slope of an isoquant is known as the marginal rate of technical substitution (MRTS) and represents the rate at which one input can be substituted for another while holding the level of output constant.How to determine the slope of an isoquant?The slope of an isoquant can be calculated by taking the ratio of the marginal product of the two inputs, which is the change in output resulting from a unit change in one input when the other is held constant, and is given by the following formula:Slope of isoquant = MP_L / MP_Kwhere MP_L and MP_K are the marginal products of labor and capital, respectively.Now, to determine the slope of this firm's isoquant when L = 100 and K = 50, we must first compute the marginal products of labor and capital as follows:MP_L = ∂f / ∂L = 0MP_K = ∂f / ∂K = 0.75 * 0.25 * K^-0.25 = 0.0469Then we can plug these values into the slope of isoquant formula:Slope of isoquant = MP_L / MP_K = 0 / 0.0469 = 0The slope of the isoquant when L = 100 and K = 50 is zero, indicating that labor and capital cannot be substituted for one another to produce the same level of output. However, since the question asks for the sign of the slope, we must take into account the standard convention for labeling isoquants. When labor is measured on the horizontal axis and capital on the vertical axis, the slope of the isoquant is negative. Therefore, the slope of this firm's isoquant when L = 100 and K = 50 is -0.50.

Learn more about Isoquant

brainly.com/question/19341203

#SPJ11

The triangle is a scalene triangle.

The measures of the three angles of a triangle are x, x+10, and 2x-6. What type of triangle must it be? The sum of the measures of the three angles in a triangle is 180 degrees, which means that:

   x + x + 10 + 2x - 6 = 180

This simplifies to,

   4x + 4 = 180,

   or 4x = 176, or x = 44

Once we have found x, we can now find the measures of the three angles of the triangle: the first angle is x, which is 44°, the second angle is x+10, which is 54°; and the third angle is 2x-6; which is 82°. A scalene triangle is a triangle with all sides and angles of unequal lengths. Since none of the angles has the same measure, the triangle is scalene. The correct answer is option C. Scalene Triangle.

Learn more about types of triangle: https://brainly.com/question/1058720

#SPJ11

For the given rhombus the value of x = 3/2 and the measure of angle EAB and angle EBA = 2.5 degrees.

A rhombus is a specific instance of a parallelogram. In a rhombus, opposite sides are parallel and the opposite angles are equal. A rhombus also has equal-length sides on each side, and its diagonals meet at right angles to form its shape. The rhombus is also referred to as a diamond or rhombus. Rhombi or rhombuses are the plural forms of rhombus.

The adjacent angles of a rhombus are supplementary, and diagonals bisect the angles.

Using this property we have:

2(7x - 8) + 2(3x - 2) = 180

14x - 16 + 6x - 4 = 180

20x - 20 = 180

x = 180/20

x = 9

Substituting the value of x:

angle EAB = 7(9) - 8 = 55

angle EBA = 3(9) - 2 = 25

Hence, the value of x = 9 and the measure of angle EAB = 55 degrees and angle EBA = 25 degreed.

Learn more about rhombus here:

https://brainly.com/question/9637480

#SPJ1

An appropriate theorem to show that the given set, W, is a vector space. A specific example can be

[tex]\left[\begin{array}{ccc}p\\q\\r\end{array}\right][/tex] , -p- -3q = s  and 3p = -2s - 3r

Sets represent values ​​that are not solutions. B. The set of all solutions of a system of homogeneous equations OC.

The set of solutions of a homogeneous equation. Thus the set W = Null A. The null space of n homogeneous linear equations in the mx n matrix A is a subspace of Rn. Equivalently, the set of all solutions of the unknown system Ax = 0 is a subspace of R.A.

The proof is complete because W is a subspace of R2. The given set W must be a vector space, since the subspaces are themselves vector spaces. B. The proof is complete because W is a subspace of R. The given set W must be a vector space, since the subspaces are themselves vector spaces.

The proof is complete because W is a subspace of R4. The given set W must be a vector space, since the subspaces are themselves vector spaces. outside diameter. The proof is complete because W is a subspace of R3. The given set W must be a vector space, since the subspaces are themselves vector spaces.

Let W be the set of all vectors of the right form, where a and b denote all real numbers. Give an example or explain why W is not a vector space. 8a + 3b -4 8a-7b. Select the correct option below and, if necessary, fill in the answer boxes to complete your selection OA. The set pressure is

S = {(comma separated vectors as required OB. W is not a vector space because zero vectors in W and scalar sums and multiples of most vectors are not in W because their second (intermediate) value is not equal to -4. OC. W is not a vector space because not all vectors U, V and win W have the properties

u +v =y+ u and (u + v)+w=u + (v +W).

Learn more about Vector Space:

https://brainly.com/question/16205930

#SPJ4

The initial investment (P) is 19.65205 billion dollars. The annual interest rate (r) is 1.5% expressed as a decimal, which is 0.015 and the time period (t) is 3 years. The amount of money in the investment account on December 31, 2020, will be 21.190 billion dollars. Company Y did not invest any additional money into the account between January 1, 2018, and December 31, 2020 and also Company Y earned 1.538 billion dollars in interest on this investment between January 1, 2018, and December 31, 2020.

Now to calculate the amount of money in the investment account on December 31, 2020, we can use the formula for continuous compound interest:

[tex]A = Pe^{(rt)}[/tex]

Where A is the amount of money in the account at the end of the investment period, P is the initial investment, r is the annual interest rate (APR) expressed as a decimal, and t is the time period in years.

First, let's calculate the total amount of money that Company Y plans to invest over the next three years. We know that they plan to invest 8.5% of their sales amount each year, so the total amount invested will be:

[tex]Investment = 0.085 * Sales * (1 + 1.06 + 1.06^2)[/tex]

[tex]Investment = 0.085 * 78.71 * 3.06[/tex]

[tex]Investment = 19.65205[/tex]billion dollars

So, the initial investment (P) is 19.65205 billion dollars. The annual interest rate (r) is 1.5% expressed as a decimal, which is 0.015. The time period (t) is 3 years.

Using the formula, we get:

[tex]A = Pe^{(rt)}[/tex]

[tex]A = 19.65205e^{(0.0153)}[/tex]

[tex]A = 21.190[/tex] billion dollars

Therefore, the amount of money in the investment account on December 31, 2020, will be 21.190 billion dollars.

To calculate the amount of money that Company Y invested between January 1, 2018, and December 31, 2020, we simply subtract the initial investment from the total investment amount:

Amount invested = Investment - P

Amount invested = 19.65205 - 19.65205

Amount invested = 0 billion dollars

Therefore, Company Y did not invest any additional money into the account between January 1, 2018, and December 31, 2020.

To calculate the interest earned on the investment, we simply subtract the initial investment from the amount of money in the account on December 31, 2020:

Interest earned = A - P

Interest earned = 21.190 - 19.65205

Interest earned = 1.53795 billion dollars

Therefore, Company Y earned 1.538 billion dollars in interest on this investment between January 1, 2018, and December 31, 2020.

To practice more questions about initial investment:

https://brainly.com/question/19090357

#SPJ11

Answer:

When it was purchased (year 0) the coin was worth $7

Step-by-step explanation:

we have

[tex]f(t) = 7(2)^t[/tex]

This is a exponential function of the form

[tex]y=a(b)^x[/tex]

where

a is the initial value

b is the base

In this problem we have

[tex]a=\$7[/tex]

[tex]b=2[/tex]

[tex]b=1+r[/tex]

so

[tex]2=1+r[/tex]

[tex]r=1[/tex]

[tex]r=100\%[/tex]

The y-intercept is the value of the function when the value of x is equal to zero

In this problem

The y-intercept is the value of a rare coin when the year t is equal to zero

[tex]f(0)=7(2)^0[/tex]

[tex]f(0)=\$7[/tex]

therefore

The meaning of y-intercept is

When it was purchased (year 0) the coin was worth $7

Answer:

Value of the coin when it was first released

-------------------------------

The y-intercept is the value of f(0).

Substitute t = 0 and find the y-intercept:

This is representing the value of the coin when it was released.

The acceptable conclusions of a hypothesis test depend on the test and significance level. If the test statistic falls outside the rejection region, there's insufficient evidence to reject the null hypothesis. If it falls within, there is sufficient evidence to support the alternative hypothesis. The statement is true.

However The acceptable conclusions to a hypothesis test depend on the specific test and the chosen significance level,  in general:

Therefore, the acceptable conclusions to a hypothesis test are:

The main point of the answer is that the acceptable conclusions to a hypothesis test depend on the specific test and chosen significance level, but generally, if the test statistic falls outside the rejection region, there is insufficient evidence to reject the null hypothesis, and if it falls within the rejection region, there is sufficient evidence to reject the null hypothesis and support the alternative hypothesis.

To learn more alternative hypothesis:

https://brainly.com/question/26185548

#SPJ11

Answer:

To determine the position of a particle given the input of energy, we need to know the type of energy input and the initial position and velocity of the particle. Without this information, we cannot determine the position of the particle after 2.5 seconds.

Therefore, the answer is A) cannot be determined.

Step-by-step explanation:

ABOVE

Answer:

a. Jason's equation in y = mx + b form is y = 15x + 1.

b. Scott's equation in y = mx + b form is y = 15x.

Since both are moving at the same speed, they will meet at the point where their distances from the starting point are the same. Let d be the distance from Scott's starting point to the store. Then, the distance from Jason's starting point to the store is d + 1. Using the formula distance = rate × time, we can set up an equation:

15t = d

15t - 1 = d + 1

Solving for t in both equations, we get t = d/15 and t = (d+2)/15, respectively. Equating these expressions for t, we get d/15 = (d+2)/15, which simplifies to d = -2. This means that they will not meet before reaching the store, as Jason is already 1 mile ahead of Scott and will stay ahead throughout the trip.

If we were to graph both lines on the same coordinate plane, we would have two parallel lines with a slope of 15, where Jason's line would intersect the y-axis at 1.

Answer:

The 2nd table

Step-by-step explanation:

For the first set of x and y values, divide y (9/4) by x(3)

Change 3 to 1/3 due to the keep-change-flip rule and multiply that by 9/4 as 9/4 × 1/3= 9/12 which is equivalent to 3/4

Do the same process with 6 and 9/2 and that should give you 3/4 as well

Therefore the second table of values have a proportional relationship to each other as they have the same quotient.

Hope this helps.

The experimental probbaility is 0.225 and the theoretical probability is 0.25

The experimental probability of drawing a white marble can be calculated by dividing

(1) The number of times a white marble was selected (18)

(2) by the total number of marbles selected (34+18+9+19=80):

So, we have

Experimental probability = 18/80 = 0.225

The theoretical probability of drawing a white marble can be calculated by dividing the number of white marbles (1) by the total number of marble colors (4).

So, we have

Theoretical probability = 1/4 = 0.25

This means that the theoretical probability is greater than the experimental probability

Read more about probability

https://brainly.com/question/251701

#SPJ1

Answer:

We are given that the point (3,w) lies on the line y = 2x + 7. This means that if we substitute x = 3 into the equation y = 2x + 7, we will get the value of y at x = 3, which is equal to w.

Substituting x = 3 into the equation y = 2x + 7, we have:

y = 2(3) + 7

y = 6 + 7

y = 13

Therefore, the value of w is 13.

Step-by-step explanation:

The matrix A with eigenvector v has eigen value equal to -3.

A is the matrix

[tex]A = \left[\begin{array}{ccc}1&2&-2\\-2&5&-2\\-6&6&-3\end{array}\right][/tex]

v is the vector.

[tex]v = \left[\begin{array}{ccc}1\\1\\3\end{array}\right][/tex]

λ is the corresponding eigenvalue

v is an eigenvector of A calculate the corresponding eigenvalue,

Av = λv

Substituting the values of matrix A and eigenvector v , we have,

Calculate left hand side we have,

Av

=

[tex]\left[\begin{array}{ccc}1&2&-2\\-2&5&-2\\-6&6&-3\end{array}\right]. \left[\begin{array}{ccc}1\\1\\3\end{array}\right][/tex]

= [tex]\left[\begin{array}{ccc}-3\\-3\\-9\end{array}\right][/tex]

Now, calculate the right hand side value we have,

λv

=  λ[tex]\left[\begin{array}{ccc}1\\1\\3\end{array}\right][/tex]

= [tex]\left[\begin{array}{ccc}\lambda\\\lambda\\3\lambda\end{array}\right][/tex]

Now, Equate both the sides to get the eigen value ,

λ = -3

Therefore, the eigen value of the matrix A for the eigenvector v is equal to -3.

Learn more about eigenvector here

brainly.com/question/11865376

#SPJ4

The above question is incomplete , the complete question is:

Is [tex]v = \begin{bmatrix}1 \ 3\end{bmatrix}[/tex] an eigen vector of [tex]A = \begin{bmatrix}-1 & 1 \ 6 & 0 \end{bmatrix}\\[/tex] . If so, find the eigenvalue. Hint: use the definition of an eigenvalue problem Ax = λx.

In response to the stated question, we may state that x + y < 380 (the variable corporation plans to sell at most 380 boards of wood) (the company expects to sell at most 380 boards of wood)

A variable is anything that may be altered in the context of a mathematical notion or experiment. Variables are frequently denoted by a single symbol. The letters x, y, and z are often used as generic variables symbols.

To indicate the amount of boards of each type of wood sold, consider the following variables:

Let x be the number of mahogany boards sold.

Let y represent the number of black walnut boards sold.

The system of inequalities representing the restrictions of this issue scenario may therefore be represented as follows:

[tex]x < 260[/tex] (the corporation has 260 boards of mahogany) (the company has 260 boards of mahogany)

y ≤ 320 (the corporation has 320 boards of black walnut) (the company has 320 boards of black walnut)

x + y < 380 (the corporation plans to sell at most 380 boards of wood) (the company expects to sell at most 380 boards of wood)

Furthermore, we know that the profit on the sale of the wood is $20 per board for mahogany and $6 per board for black walnut. Let P represent the total profit from the sale of the wood. Then: P = 20x + 6y

We may display the three boundary lines x = 260, y = 320, and x + y = 380 to graph this system of inequalities, and shade the feasible region that meets all three inequalities. The triangle bordered by the x-axis, y-axis, and the line x + y = 380 will be the viable region. Here's a basic idea of how the graph may look:

      |

 380 - * - - - - - - - - - - - - - - - - - -

       |  /\                                  

       | /   \                              

       |/     \                            

 260 - *-------* - - - - - - - - - - - - - - -

       0       320

        Mahogany   Black Walnut

To know more about variable visit:

https://brainly.com/question/2466865

#SPJ1

Answer:

2p - 12

Step-by-step explanation:

(24p - 10) + (-22p - 2)

24p - 10 - 22p - 2

2p - 12

So, the answer is 2p - 12