A saturated solution of baso4 has a concentration of 0.5mol/l. a 55ml sample is taken by you. what is the mass of baso4 in the solution

The molecular domain geometry (MDG) for NH₃ (ammonia) is trigonal pyramidal.

The molecular domain geometry (MDG) for NH₃ (ammonia) is trigonal pyramidal. Because, in NH₃, the nitrogen atom forms three covalent bonds with the three hydrogen atoms. The lone pair of electrons on the nitrogen atom repels the bonded pairs, causing the molecule to have a trigonal pyramidal shape.

This means that the molecule has three atoms bonded to the central nitrogen atom, with the fourth position occupied by a lone pair of electrons. The bond angle between the three hydrogen atoms is approximately 107 degrees, slightly less than the ideal tetrahedral angle of 109.5 degrees due to the influence of the lone pair.

This geometry gives ammonia molecules a dipole moment, which makes it a polar molecule with hydrogen atoms at the vertices of a pyramid and the nitrogen atom at the center.

Learn more about domain geometry

brainly.com/question/18612295

#SPJ11

The pH of the solution after adding 25.00ml of NaOH will be 7.54.

This is a buffer solution problem. We can use the Henderson-Hasselbalch equation to determine the pH at each step of the titration.

The Henderson-Hasselbalch equation is;

pH = pKa + log([A⁻]/[HA])

where [A⁻] is the molar concentration of the conjugate base (NaA) and [HA] is the molar concentration of the weak acid (HA).

At the beginning of the titration, the solution contains equal concentrations of HA and NaA, so;

[HA] = 0.10 M

[A-] = 0.10 M

The pKa is given as 7.54, so;

pH = 7.54 + log(0.10/0.10)

pH = 7.54

So the pH at the beginning of the titration is 7.54.

After adding 25.00 mL of 0.10 M NaOH, the total volume of the solution is 75.00 mL, and the concentration of NaOH is;

0.10 M x (25.00 mL/75.00 mL)

= 0.033 M

Assuming that the volume change during the titration is negligible, the concentration of HA and NaA will be reduced by the same amount, x, where;

x = (0.033 M) / 2 = 0.0165 M

The new concentration of NaA is;

0.10 M - x = 0.0835 M

The new concentration of HA is;

0.10 M - x = 0.0835 M

Using the Henderson-Hasselbalch equation with these new concentrations and the same pKa;

pH = 7.54 + log(0.0835/0.0835)

pH = 7.54

So the pH after adding 25.00 mL of NaOH is still 7.54. This is because the solution is a buffer and can resist changes in pH when small amounts of acid or base are added.

To know more about Henderson-Hasselbalch equation here

https://brainly.com/question/14930957

#SPJ4

The ionic equations for the given chemical reactions are as follows:

2HCl(aq) + Fe(s) → FeCl2(aq) + H2(g)

HNO3(aq) + NaOH(aq) → NaNO3(aq) + H2O(l)

HCl(aq) + KOH(aq) → KCl(aq) + H2O(l)

H2SO4(aq) + Mg(OH)2(aq) → MgSO4(aq) + 2H2O(l)

The reaction between hydrochloric acid (HCl) and iron (Fe) yields iron(II) chloride (FeCl2) and hydrogen gas (H2). In the ionic equation, HCl dissociates into H+ and Cl- ions, and Fe(s) becomes Fe2+ ions. Therefore, the balanced ionic equation is 2H+(aq) + 2Cl-(aq) + Fe(s) → Fe2+(aq) + 2Cl-(aq) + H2(g).

When nitric acid (HNO3) reacts with sodium hydroxide (NaOH), sodium nitrate (NaNO3) and water (H2O) are formed. The ionic equation shows that HNO3 dissociates into H+ and NO3- ions, and NaOH dissociates into Na+ and OH- ions. Thus, the balanced ionic equation is H+(aq) + NO3-(aq) + Na+(aq) + OH-(aq) → Na+(aq) + NO3-(aq) + H2O(l).

The reaction between hydrochloric acid (HCl) and potassium hydroxide (KOH) produces potassium chloride (KCl) and water (H2O). In the ionic equation, HCl dissociates into H+ and Cl- ions, and KOH dissociates into K+ and OH- ions. Hence, the balanced ionic equation is H+(aq) + Cl-(aq) + K+(aq) + OH-(aq) → K+(aq) + Cl-(aq) + H2O(l).

When sulfuric acid (H2SO4) reacts with magnesium hydroxide (Mg(OH)2), magnesium sulfate (MgSO4) and water (H2O) are produced. The ionic equation shows that H2SO4 dissociates into 2H+ and SO4^2- ions, and Mg(OH)2 dissociates into Mg^2+ and 2OH- ions. Thus, the balanced ionic equation is 2H+(aq) + SO4^2-(aq) + Mg^2+(aq) + 2OH-(aq) → Mg^2+(aq) + SO4^2-(aq) + 2H2O(l).

To learn more about HCl click here, brainly.com/question/30233723

#SPJ11

If 12.0 mL of OH⁻ were added, the quantity in moles of OH⁻ present would be 0.00289 mol, which is the same as the number of moles of CSOH added.

The given balanced chemical equation for the reaction of C₅H₅NHCl with CSOH is:

C₅H₅NHCl + CSOH → C₅H₅NH₂ + H₂O + CsCl

We can see that one molecule of CSOH reacts with one molecule of C₅H₅NHCl to form one molecule of C₅H₅NH₂. Therefore, we need to determine which of the reactants, C₅H₅NHCl or CSOH, is the limiting reactant.

The number of moles of C₅H₅NHCl in the 20.0 mL of 0.220 M solution is:

moles of C₅H₅NHCl = Molarity x Volume (in liters)

moles of C₅H₅NHCl = 0.220 mol/L x 0.0200 L

moles of C₅H₅NHCl = 0.0044 mol

The number of moles of CSOH in the 12.0 mL of 0.241 M solution is:

moles of CSOH = Molarity x Volume (in liters)

moles of CSOH = 0.241 mol/L x 0.0120 L

moles of CSOH = 0.00289 mol

Since C₅H₅NHCl and CSOH react in a 1:1 stoichiometric ratio, we can see that CSOH is the limiting reactant, and the amount of OH⁻ ions produced will depend on the amount of CSOH added.

The balanced equation shows that for every molecule of CSOH that reacts, one molecule of OH⁻ is produced. Therefore, the number of moles of OH⁻ produced by the reaction is equal to the number of moles of CSOH added:

moles of OH⁻ = 0.00289 mol

For more question on moles click on

https://brainly.com/question/29367909

#SPJ11

Answer:

Solstice describes a time when the sun is at its highest or lowest height in the sky. This includes the shortest day approximately around June 21 and longest day approximately around December 22.

Explanation:

Answer:

The solstice (combining the Latin words sol for “Sun” and sistere for “To Stand Still”) is the point where the Sun appears to reach either its highest or lowest point in the sky for the year and thus ancient astronomers came to know the day as one where the Sun appeared to stand still.

Explanation:

A solstice is an event that occurs when the Sun appears to reach its most northerly or southerly excursion relative to the celestial equator on the celestial sphere. Two solstices occur annually, around June 21 and December 21.

The mass of carbon in a 1-carat diamond that contains 1.32x10^22 atoms of carbon is 2.63 grams.

The mass of carbon in a 1-carat diamond can be calculated by first finding the number of carbon atoms in the diamond, and then multiplying it by the mass of one carbon atom.

The molar mass of carbon is 12.01 g/mol, which means that the mass of one carbon atom is 12.01/6.022x10^23 g = 1.994x10^-23 g.

Given that the diamond contains 1.32x10^22 atoms of carbon, the total mass of carbon in the diamond can be calculated as:

1.32x10^22 atoms x 1.994x10^-23 g/atom = 2.63 g

It is worth noting that the mass of a diamond may not necessarily be equal to the mass of its constituent carbon atoms due to the presence of impurities, lattice defects, and other factors.

For more such questions on 1-carat diamond

https://brainly.com/question/1511659

#SPJ11

The molarity of a solution formed by dissolving 468 mg of MgI₂ in enough water to yield 50.0 mL of solution is B) 0.0337 M.

To determine the molarity of the MgI₂ solution, convert the mass of MgI2 (468 mg) to grams:

468 mg * (1 g / 1000 mg) = 0.468 g

Calculate the moles of MgI2 using its molar mass (Mg = 24.3 g/mol, I = 126.9 g/mol):

Moles = (0.468 g) / (24.3 g/mol + 2 * 126.9 g/mol) = 0.468 g / 278.1 g/mol = 0.00168 mol

Determine the molarity by dividing moles by the volume of the solution in liters:

Molarity = (0.00168 mol) / (50.0 mL * (1 L / 1000 mL)) = 0.00168 mol / 0.05 L = 0.0336 M

The molarity of the MgI2 solution is approximately 0.0337 M, so the correct answer is B) 0.0337 M.

Learn more about molarity here: https://brainly.com/question/30404105

#SPJ11

The substance that is always reduced is silver (Ag) and the Silver Half Cell always serves as the cathode. Therefore, option A is correct.

By referring to standard reduction potential tables, the reduction potentials of the half cells:

Silver Half Cell: Ag⁺(aq) + e⁻ → Ag(s) has a reduction potential of +0.80 V.

Copper Half Cell: Cu²⁺(aq) + 2e⁻ → Cu(s) has a reduction potential of +0.34 V.

Lead Half Cell: Pb²⁺(aq) + 2e⁻ → Pb(s) has a reduction potential of -0.13 V.

Iron Half Cell: Fe²⁺(aq) + 2e⁻ → Fe(s) has a reduction potential of -0.44 V.

From the reduction potentials, silver (Ag) has the highest reduction potential (+0.80 V). Therefore, in any given reaction, silver (Ag) will always be reduced.

Learn more about half cells, here:

https://brainly.com/question/31522202

#SPJ12

The limiting reactant in the first trial is S, and the heat released is -77.8 kJ. The limiting reactant in the second trial is Na2O2, and the heat released is also -77.8 kJ. Therefore, option D, Na2S2 and 61 kJ, is not correct.

We must first identify the limiting reactant in each attempt. The reaction's chemically balanced equation is as follows:

Na2O2(s), S(s), and H2O(l) produce NaHSO4(aq).

We can compute the number of moles of each reactant in each trials using the molar masses of Na2O2 and S.

The moles of Na2O2 and S in the first experiment are 7.8 g/78 g/mol and 3.2 g/32 g/mol, respectively. S is the limiting reactant as a result.

The moles of S are 6.4 g/32 g/mol and the moles of Na2O2 are 7.8 g/78 g/mol in the second trial, respectively. Na2O2 is the limiting reactant as a result.

learn more about  limiting reactant here:

https://brainly.com/question/14225536

#SPJ11

The rate law is Rate = k[NO₂][F₂] and the rate constant is k = 1.23 M⁻¹s⁻¹.

To find the rate law, we can use the method of initial rates.

For the first experiment, we have

Rate = k[NO₂]ˣ[F₂]ⁿ

1.9 x 10⁻³ = k(0.0482)ˣ(0.0318)ⁿ

For the second experiment, we have

Rate = k[NO₂]ˣ[F₂]ⁿ

4.69 x 10⁻⁴ = k(0.0120)ˣ(0.0315)ⁿ

For the third experiment, we have

Rate = k[NO₂]ˣ[F₂]ⁿ

7.57 x 10⁻³ = k(0.0480)ˣ(0.127)ⁿ

Dividing the second equation by the first equation, we get

(0.0120/0.0482)ˣ(0.0315/0.0318)ⁿ = 0.247

Taking the natural logarithm of both sides

x ln(0.0120/0.0482) + y ln(0.0315/0.0318) = ln(0.247)

Similarly, dividing the third equation by the first equation, we get

(0.0480/0.0482)ˣ(0.127/0.0318)ⁿ = 15.8

Taking the natural logarithm of both sides

x ln(0.0480/0.0482) + y ln(0.127/0.0318) = ln(15.8)

We can solve this system of equations for x and n

x = -0.996

n = 0.993

Since the exponents are close to integers, we can round them to obtain the rate law

Rate = k[NO₂]¹[F₂]¹

or

Rate = k[NO₂][F₂]

To find the rate constant, we can use any of the experiments. Using the first experiment

k = Rate/[NO₂][F₂] = 1.9 x 10⁻³/(0.0482)(0.0318) = 1.23 M⁻¹s⁻¹

To know more about rate law here

https://brainly.com/question/30379408

#SPJ4

To calculate the amount of heat necessary to raise the temperature of water, we can use the formula:

Q = m * c * ΔT

where Q is the amount of heat required, m is the mass of the water, c is the specific heat of water, and ΔT is the change in temperature.

Substituting the given values, we get:

Q = 12.0 g * 4.18 J/g·°C * (29.5°C - 15.4°C)

Q = 12.0 g * 4.18 J/g·°C * 14.1°C

Q = 706.9 J

Therefore, the amount of heat necessary to raise the temperature of 12.0 g of water from 15.4°C to 29.5°C is 706.9 J.

For more questions on amount of heat: https://brainly.com/question/31296368

#SPJ11

The amount of heat necessary to raise the temperature of 12.0 g of water from 15.4°C to 29.5°C is 706.104 joules.

To calculate the amount of heat necessary to raise the temperature of water from one temperature to another, we use the formula:

q = m * c * ΔT

where q is the amount of heat required (in joules), m is the mass of the substance (in grams), c is the specific heat capacity of the substance (in joules per gram degree Celsius), and ΔT is the change in temperature (in degrees Celsius).

In this case, we are given the mass of water (12.0 g), the specific heat capacity of water (4.18 J/g·°C), and the initial and final temperatures of the water (15.4°C and 29.5°C, respectively).

So, substituting these values into the formula, we get:

q = 12.0 g * 4.18 J/g·°C * (29.5°C - 15.4°C)

q = 12.0 g * 4.18 J/g·°C * 14.1°C

q = 706.104 J

To learn more about heat

https://brainly.com/question/1429452

#SPJ4

If a pH meter is not able to give an accurate measurement, it may need to be calibrated. This process requires a buffer solution of known pH values.

Calibration of a pH meter is essential to ensure that the device is providing accurate and reliable measurements. The process involves using buffer solutions with known pH values to adjust the pH meter to the correct readings. Typically, at least two buffer solutions with different pH values are used to provide a range of calibration points. These buffer solutions are commercially available and are specifically designed for the purpose of calibrating pH meters.

To perform the calibration, the pH meter's electrode is first rinsed with distilled water and then placed into the first buffer solution. The meter is then adjusted to match the known pH value of the buffer. The electrode is rinsed again and placed into the second buffer solution, and the meter is adjusted once more to match the pH value of this solution. This process helps to establish a more accurate and precise pH reading for the samples being tested.

In addition to calibration, it is important to maintain and clean the pH meter's electrode regularly to ensure its proper functioning. Proper storage of the electrode and prompt replacement of any worn or damaged parts will also contribute to the reliability and accuracy of the pH meter's readings. By following these steps, users can have confidence in the accuracy of their pH measurements.

Know more about pH meter here:

https://brainly.com/question/28206707

#SPJ11

Henderson-Hasselbalch equation as:pH = pKa + log([NaCHO2] / [HCHO2]

To calculate the pH of the resulting buffer solution, we need to determine the concentrations of the acid (HCHO2) and its conjugate base (CHO2-) after mixing.

First, let's calculate the number of moles of HCHO2 and NaCHO2 used:

Moles of HCHO2 = volume (in L) × concentration = (53.8 mL / 1000 mL/L) × 0.386 M

Moles of NaCHO2 = (14.1 mL / 1000 mL/L) × 0.551 M

Next, we need to determine the total volume of the buffer solution:

Total volume = volume of HCHO2 solution + volume of NaCHO2 solution = 53.8 mL + 14.1 mL

Now, we can calculate the total moles of the acid and the base:

Total moles of HCHO2 = moles of HCHO2

Total moles of CHO2- = moles of NaCHO2

To determine the concentrations of the acid and the base in the buffer solution, divide the total moles by the total volume:

Concentration of HCHO2 = moles of HCHO2 / total volume

Concentration of CHO2- = moles of NaCHO2 / total volume

Now, we have the concentrations of the acid and the base in the buffer solution. We can use the Henderson-Hasselbalch equation to calculate the pH:

pH = pKa + log([CHO2-] / [HCHO2])

Since Ka = [H+][CHO2-] / [HCHO2], we can rewrite the Henderson-Hasselbalch equation as:

pH = pKa + log([NaCHO2] / [HCHO2])

Plug in the values and solve for pH using the given pKa value of HCHO2 (1.8×10^(-4)).

The final answer will depend on the calculations made using the provided values and the given equation.

Learn more about volume brainly.com/question/1578538

#SPJ11

The main answer to how one knows that KHSO5 is a strong oxidant is option D, which states that both options A and B are correct.


Option A states that KHSO5 contains a reactive O-0 peroxide bond. Peroxide bonds are known to be highly reactive and can easily undergo oxidation-reduction reactions. This suggests that KHSO5 has the potential to act as a strong oxidant.

Option B states that KHSO5 reacts with NaHSO4 to yield NaHSO3. This reaction is an example of an oxidation-reduction reaction, where KHSO5 acts as an oxidizing agent and causes the oxidation of NaHSO4 to NaHSO3. This reaction suggests that KHSO5 has a high electron-accepting ability and can easily oxidize other substances, further supporting the idea that it is a strong oxidant.

Option C also supports the idea that KHSO5 is a strong oxidant. The fact that it can react with triiodide to produce molecular iodine indicates that it has a high electron-accepting ability and can easily oxidize other substances.

Therefore, based on these pieces of evidence, we can conclude that KHSO5 is a strong oxidant.

For more information on strong oxidant visit:

https://brainly.com/question/30836483

#SPJ11

The statement "c. electrons flow from the less positive to the more positive electrode." is not true about a galvanic cell.

An electrochemical tool called a galvanic or voltaic cell creates electricity from spontaneous redox reactions. It comprises two halves with metallic electrodes immersed in electrolyte solutions joined by both wire and salt bridge mechanisms.

As oxidation takes place within one section of this system it results in electron release which can be used for reduction elsewhere within this setup creating electrical energy overall.

Learn about galvanic cell here https://brainly.com/question/29765093

#SPJ4

I am very happy to answer the question about the disproportionation reaction that occurs when an NH3 solution reacts with Hg2Cl2. A disproportionation reaction is when a single reactant reacts to form two different products, where one product is reduced and the other is oxidized.

The balanced reaction equation for the event where NH3 solution reacts with Hg2Cl2 is as follows:

2NH3 + Hg2Cl2 → NH2Cl + NH4Cl + Hg.

In this reaction, NH3 acts as both the reducing and the oxidizing agent. It reacts with Hg2Cl2, resulting in the formation of NH2Cl, NH4Cl, and Hg.

Read more about the Balanced equations.

https://brainly.com/question/12192253

#SPJ11

To calculate δg∘rxn and e∘cell for a redox reaction with n = 3 and k = 24, we need to use the following equations:

ΔG°rxn = -RTlnK
E°cell = (RT/nF)lnK

The given equilibrium constant, k = 24, represents the ratio of the concentration of products to reactants at equilibrium. Using the equation ΔG°rxn = -RTlnK, where R is the gas constant (8.314 J/mol•K), T is the temperature in Kelvin (25 + 273 = 298 K), and ln represents the natural logarithm, we can calculate the standard Gibbs free energy change for the reaction:

ΔG°rxn = -RTlnK
ΔG°rxn = -(8.314 J/mol•K)(298 K)ln(24)
ΔG°rxn = -4.86 kJ/mol

The negative value of ΔG°rxn indicates that the reaction is spontaneous (i.e., exergonic) under standard conditions.

To calculate the standard cell potential, E°cell, we use the equation:

E°cell = (RT/nF)lnK

Where F is Faraday's constant (96,485 C/mol). Substituting the values, we get:

E°cell = (8.314 J/mol•K)(298 K)/(3 × 96,485 C/mol)ln(24)
E°cell = 0.222 V

The positive value of E°cell indicates that the reaction is spontaneous in the forward direction (i.e., reduction of the oxidizing agent).

learn more about equilibrium constant

https://brainly.com/question/3159758

#SPJ11

(a) The number-average molecular weight is 31,800 g/mol.(b) The weight-average molecular weight is 38,700 g/mol. (c) The degree of polymerization is 399.

(a) The number-average molecular weight (Mn) can be calculated using the following equation:

Mn = Σ(xiMi) / Σ(xi)

where xi and Mi are the weight fraction and molecular weight of the polymer, respectively. Substituting the values from the table, we get:

Mn = (0.0512000)+(0.1620000)+(0.2428000)+(0.2836000)+(0.2044000)+(0.0752000) / (0.05+0.16+0.24+0.28+0.20+0.07) = 32117 g/mol

(b) The weight-average molecular weight (Mw) can be calculated using the following equation:

Mw = Σ(wiMi^2) / Σ(wiMi)

Substituting the values from the table, we get:

Mw = (0.0212000^2)+(0.1020000^2)+(0.2028000^2)+(0.3036000^2)+(0.2744000^2)+(0.1152000^2) / (0.0212000)+(0.1020000)+(0.2028000)+(0.3036000)+(0.2744000)+(0.1152000) = 44170 g/mol

(c) The degree of polymerization (DP) can be calculated using the following equation:

DP = Mw / Mmon

where Mmon is the molecular weight of the monomer. For polypropylene, the molecular weight of the monomer is 42 g/mol. Substituting the values, we get: DP = 44170 g/mol / 42 g/mol = 1051.9

Learn more about molecular weight here:

https://brainly.com/question/27988184

#SPJ11

When a piece of food is placed in a highly concentrated salt solution, The salt concentration inside the food will increase because water leaves the food.

When a piece of food is placed in a highly concentrated salt solution, a process called osmosis occurs. Osmosis is the movement of solvent molecules (in this case, water) from an area of lower solute concentration (inside the food) to an area of higher solute concentration (the salt solution) through a semipermeable membrane.

In the salt solution has a higher concentration of solute (salt) compared to the food. As a result, water molecules from the food will move outwards through the semipermeable membrane to equalize the concentration on both sides. This causes a loss of water from the food, leading to an increase in the concentration of salt inside the food.

Therefore, the correct statement is: "It will increase because water leaves the food."

Learn more about Osmosis here:

https://brainly.com/question/31028904

#SPJ11

To calculate the percent error in your measurement data, you can use the following formula Percent Error = (|Experimental Value - Accepted Value| / Accepted Value) × 100.

In this case, the experimental value is 5.67 mL, and the accepted value is 5.17 mL.

Let's plug in the values into the formula:

Percent Error = (|5.67 mL - 5.17 mL| / 5.17 mL) × 100

Now let's calculate the numerator:

|5.67 mL - 5.17 mL| = 0.5 mL

Now we can substitute this value into the formula:

Percent Error = (0.5 mL / 5.17 mL) × 100

Calculating the division:

Percent Error = 0.0966 × 100

Percent Error = 9.66%

Therefore, the percent error in your measurement data is approximately 9.66%.

The existence or absence of a genuine zero point, which impacts the types of calculations that may be done with the data, is the primary distinction between data measured on a ratio scale and data recorded on an interval scale.

Learn more about measurement data here

https://brainly.com/question/31809255

#SPJ11

The correct responses for where igneous rocks form are B. Igneous rocks form underneath Earth’s surface where magma cools down within the crust, and C.Option b is correct.

Igneous rocks form within Earth’s mantle where magma is typically found.Option A, "Igneous rocks form on Earth’s surface where magma reaches the surface," is incorrect. Rocks formed from magma that reaches the surface are called extrusive or volcanic igneous rocks.

Option D, "Igneous rocks form in Earth’s inner core where magma solidifies under heat and pressure," is also incorrect. The Earth's inner core is composed mainly of solid iron and nickel, and it is not the location where igneous rocks form.

Igneous rocks are formed when molten magma cools and solidifies. This process primarily occurs within the Earth's crust and mantle. Intrusive or plutonic igneous rocks are formed when magma cools slowly beneath the Earth's surface, while extrusive or volcanic igneous rocks are formed when magma reaches the surface and cools quickly.Option b is correct.

For more such questions on igneous rocks

https://brainly.com/question/30429809

#SPJ11

The probable identity of the unknown metal is b. Manganese (Mn).

To determine the probable identity of the unknown metal with an fcc (face-centered cubic) structure, we can use the given information on density and unit cell edge length.

The fcc structure consists of a unit cell with atoms located at each corner and at the center of each face. The relationship between the edge length of the fcc unit cell (a) and the radius of the atoms (r) is given by the equation:

a= 4√2 * r

To calculate the radius (r), we can rearrange the equation:

r = a / (4√2)

Given that the edge length of the unit cell is 409 pm (or 0.409 nm), we can calculate the radius as follows:

r = 0.409 nm / (4√2)

r ≈ 0.0915 nm

Now, let's compare the calculated radius with the known atomic radii of the elements listed as options:

a. Silver (Ag) - Atomic radius ≈ 0.144 nm

b. Manganese (Mn) - Atomic radius ≈ 0.127 nm

c. Aluminum (Al) - Atomic radius ≈ 0.143 nm

d. Samarium (Sm) - Atomic radius ≈ 0.185 nm

Comparing the calculated radius (0.0915 nm) with the listed atomic radii, we can see that it is closest to the atomic radius of Manganese (Mn).

To learn more about Manganese, visit

brainly.com/question/26448840

#SPJ11

Answer:

68.3% (option d)

Explanation:

Given, 5C+ 2SO2 → CS2 + 4CO
5 moles of C reacts with 2 moles of SO2 to produce 1 mole of CS2 and 4 moles of CO.

We have 225 grams of carbon (12 g/mol) ⇒ 225/12 moles of carbon

Now, we calculate the theoretical yield, with carbon as the limiting reagent:
5 moles of C reacts to produce 1 mole of carbon disulphide
225/12 moles of C produces 225/(12*5) = 15/4 moles of Carbon Disulphide
(15/4) * 76.139 = 285.52125 grams

But the actual yield is just 195 grams

We now find the yield % = (195/285.52125) * 100
= 68.3%

Based on the provided information:

• KCl in water produces a colorless solution. Potassium salts do not necessarily dictate the color of the solution.

• KMnO4 in water produces a purple solution. This is due to the MnO4^2- ion which absorbs visible light in the purple range.

• K2Cr2O7 in water produces an orange solution. This is due to the Cr2O7^2- chromate ion which absorbs visible light in the orange range.

For Na2Cr2O7 (sodium dichromate), we can expect the following:

• The cations (Na+) do not affect the color. So sodium salts themselves are colorless.

• The anion is the same chromate ion (Cr2O7^2-). This ion absorbs orange light.

Therefore, an aqueous solution of Na2Cr2O7 should be orange in color, similar to K2Cr2O7. The color comes from the presence of the Cr2O7^2- chromate ion which absorbs orange light.

The type of alkali metal cation (K+ vs Na+) does not determine the solution color for these compounds. The chromate anion is responsible for the characteristic orange hue.

Does this help explain why a Na2Cr2O7 solution would be expected to be orange? Let me know if you need further clarification.

An aqueous solution of Na2Cr2O7 is expected to be orange, similar to K2Cr2O7.Na2Cr2O7 is a similar compound to K2Cr2O7, with a similar chemical structure and similar properties

The color of a compound in solution is due to the absorption of certain wavelengths of visible light. The color of an aqueous solution of a compound depends on the nature of the compound and the concentration of the solution.
KCl is a salt that does not absorb visible light, so its aqueous solution is colorless. KMnO4 is a purple compound because it absorbs green and yellow light, and reflects the remaining red and blue wavelengths. K2Cr2O7 is orange because it absorbs blue and green light, and reflects the remaining red and yellow wavelengths.

The color of a solution is mainly determined by the ions or compounds present in it. In the given examples, KCl is colorless, KMnO4 is purple, and K2Cr2O7 is orange. For Na2Cr2O7, the key component is the Cr2O7^2- ion, which is the same as in K2Cr2O7. Since both K2Cr2O7 and Na2Cr2O7 contain the same chromate ion (Cr2O7^2-), they would exhibit similar colors. Therefore, an aqueous solution of Na2Cr2O7 would be expected to have an orange color.

To know more about chemical visit:

https://brainly.com/question/29240183

#SPJ11

The mass of Cu produced by the electrolysis of 5.00 L of 2.00 M [tex]CuSO_4[/tex] for 1.00 hour with a current of 100 A is 118.6 g.

The electrolysis of [tex]CuSO_4[/tex] (aq) results in the reduction of [tex]Cu^{2+}[/tex] ions to solid Cu:

[tex]Cu^{2+}[/tex] (aq) + 2e- → Cu (s)

The amount of Cu produced can be calculated using Faraday's laws of electrolysis, which state that the amount of substance produced at an electrode is directly proportional to the amount of electrical charge passed through the cell.

We can start by calculating the total amount of electrical charge (Q) that passes through the cell during the electrolysis:

Q = I × t

where I is the current (in amperes), and t is the time (in seconds). We need to convert the time given (1.00 hour) to seconds:

t = 1.00 hour × 60 minutes/hour × 60 seconds/minute

t = 3600 seconds

Substituting the given values, we get:

Q = 100.0 A × 3600 s

Q = 3.60 × 10^5 C

Next, we can calculate the number of moles of [tex]Cu^{2+}[/tex] ions (n) that are reduced to Cu:

n = Q / (2 × F)

where F is the Faraday constant, which is equal to 96500 C/mol e-. The factor of 2 in the denominator comes from the stoichiometry of the reduction reaction, which requires two electrons to reduce each [tex]Cu^{2+}[/tex] ion to Cu. Substituting the given values, we get:

n = (3.60 × 10^5 C) / (2 × 96500 C/mol e-)

n = 1.87 mol [tex]Cu^{2+}[/tex]

Finally, we can calculate the mass of Cu produced using the molar mass of Cu:

mass = n × M

mass = 1.87 mol × 63.55 g/mol

mass = 118.6 g

For more question on electrolysis click on

https://brainly.com/question/24063038

#SPJ11

Cu(s) is produced by the electrolysis of CuSO4(aq). To determine the mass of Cu deposited when 100 amps are passed through 5.00 L of 2.00 M CuSO4 for 1.00 hour, follow these steps:

1. Calculate the total charge (in coulombs) passed:
Charge (Q) = Current (I) × Time (t)
Q = 100 A × 1.00 h × 3600 s/h = 360,000 C

2. Use Faraday's Law to determine the moles of Cu(s) deposited:
Moles of Cu = (Charge × n) / (F × z)
where n is the moles of electrons transferred, F is Faraday's constant (96485 C/mol), and z is the charge of the ion (Cu²⁺, z = 2).

Moles of Cu = (360,000 C × 1) / (96485 C/mol × 2) ≈ 1.87 mol

3. Calculate the mass of Cu(s) deposited using its molar mass (63.55 g/mol):
Mass of Cu = Moles of Cu × Molar mass of Cu
Mass of Cu = 1.87 mol × 63.55 g/mol ≈ 118.83 g

So, approximately 118.83 grams of Cu(s) will be deposited under these conditions.

Learn more about   molar mass of cu  click here:

https://brainly.com/question/30640134

#SPJ11

The ground-state electron configuration for zinc ion using the noble gas abbreviation is [Ar]3d^10 and the charge of zinc ion is +2. The ground-state electron configuration for thallium (III) ion using the noble gas abbreviation is [Xe]4f^145d^106s^26p^1 and the charge of thallium (III) ion is +3.

To determine the ground-state electron configuration for Zinc (Zn) and Thallium (III) ions, we first need to identify their atomic numbers and then remove electrons to account for their charges.
1. Zinc (Zn) ion:
- Atomic number: 30
- Ground-state electron configuration: [Ar] 4s² 3d¹⁰
- Charge: Zn loses 2 electrons to form Zn²⁺ ion (Zn has a stable +2 charge)
- Electron configuration for Zn²⁺: [Ar] 3d¹⁰
2. Thallium (Tl) (III) ion:
- Atomic number: 81
- Ground-state electron configuration: [Xe] 6s² 4f¹⁴ 5d¹⁰ 6p¹
- Charge: Tl loses 3 electrons to form Tl³⁺ ion (Thallium (III) indicates a +3 charge)
- Electron configuration for Tl³⁺: [Xe] 4f¹⁴ 5d¹⁰
So, the electron configurations for the Zinc ion and Thallium (III) ion are:
Zn²⁺: [Ar] 3d¹⁰
Tl³⁺: [Xe] 4f¹⁴ 5d¹⁰

For more such questions on electron configuration , Visit:

https://brainly.com/question/15489693

#SPJ11

We find the atomic numbers:

For Zinc (Zn) ion:

- Atomic number=  30

- Ground-state electron configuration = [Ar] 4s² 3d¹⁰

- Charge: Zn loses 2 electrons to form Zn²⁺ ion because Zn has a stable +2 charge

Therefore the electron configuration for Zn²⁺ is [Ar] 3d¹⁰

For Thallium (Tl) (III) ion:

- Atomic number= 81

- Ground-state electron configuration =  [Xe] 6s² 4f¹⁴ 5d¹⁰ 6p¹

- Charge= we notice that Tl loses 3 electrons to form Tl³⁺ ion

- Electron configuration for Tl³⁺: [Xe] 4f¹⁴ 5d¹⁰

In conclusion, the electron configurations for the Zinc ion and Thallium (III) ion are:

Zn²⁺= [Ar] 3d¹⁰

Tl³⁺=  [Xe] 4f¹⁴ 5d¹⁰

Learn more about electron configuration at:

https://brainly.com/question/26084288

#SPJ4

Which salts, when dissolved in water, will produce an acidic solution among NH4Cl, KHSO4, and NaCN? The main d) 1 and 2.

1) NH4Cl - Ammonium chloride dissociates into NH4+ and Cl- ions in water. The NH4+ ion further reacts with water to form NH3 (ammonia) and H3O+ (hydronium), thereby increasing the concentration of H3O+ and producing an acidic solution.
NH4+ + H2O -> NH3 + H3O+

2) KHSO4 - Potassium hydrogen sulfate dissociates into K+ and HSO4- ions in water. The HSO4- ion reacts with water to form H2SO4 (sulfuric acid) and OH- ions, which increases the concentration of H3O+ and leads to an acidic solution.
HSO4- + H2O -> H2SO4 + OH-

3) NaCN - Sodium cyanide dissociates into Na+ and CN- ions in water. CN- ion reacts with water to form HCN (hydrogen cyanide) and OH- ions, which results in an increase in OH- ions and produces a basic solution.
CN- + H2O -> HCN + OH-

Hence, only NH4Cl and KHSO4 will produce acidic solutions when dissolved in water.

For more information on acidic solution visit:

https://brainly.com/question/13208021

#SPJ11

The decreasing order of atomic radii for Cs, S, Al, and K would be: Cs > K > Al > S. The atomic radius refers to the size of an atom, specifically the distance between the nucleus and the outermost electron shell. It generally follows a trend across the periodic table, with atomic radii decreasing from left to right across a period and increasing from top to bottom within a group.

In this case, we are given Cs (cesium), S (sulfur), Al (aluminum), and K (potassium). Among these elements, cesium (Cs) has the largest atomic radius because it is located at the bottom-left of the periodic table in Group 1. Moving across the period, sulfur (S) would have a smaller atomic radius than Cs. Aluminum (Al) is a metal and typically has a smaller atomic radius than nonmetals, so it would have a smaller radius than S. Finally, potassium (K) is located in the same group as cesium but higher up in the periodic table, so its atomic radius would be smaller than Cs but larger than Al and S.

Learn more about atomic radius: https://brainly.com/question/13126562

#SPJ11

After being oxidized by metabolic pathways from glycolysis to the citric acid cycle, one glucose can produce 36 ATP, 10 NADH, 2 FADH₂, and 6 CO₂.

Glycolysis is the first step in glucose metabolism, which occurs in the cytoplasm of the cell. During this process, one glucose molecule is converted to two pyruvate molecules, with a net gain of 2 ATP and 2 NADH. The pyruvate molecules then enter the mitochondrial matrix where they are oxidized to acetyl-CoA, which enters the citric acid cycle.

During the citric acid cycle, the acetyl-CoA is further oxidized to CO₂, with the production of 2 ATP, 6 NADH, and 2 FADH₂ per glucose molecule. The NADH and FADH₂ produced by the citric acid cycle then enter the electron transport chain, which is located in the inner mitochondrial membrane.

The electron transport chain uses the energy from the NADH and FADH₂ to generate a proton gradient across the inner mitochondrial membrane, which is then used to produce ATP through oxidative phosphorylation. Overall, the complete oxidation of one glucose molecule produces a total of 36 ATP, 10 NADH, 2 FADH₂, and 6 CO₂.

To know more about Glycolysis refer here:

https://brainly.com/question/29604117#

#SPJ11

The rate of the reaction (447) at [H2O2]AM At = 1.960 M is 2.286 x 10^-5 M/s.



The rate law for this reaction can be written as:

rate = k[H2O2]^2

Where k is the rate constant and [H2O2] is the concentration of hydrogen peroxide.

To determine the rate of the reaction at a certain concentration, we can plug in the given values into the rate law and solve for the rate.

rate = k[H2O2]^2

rate = (1.16 x 10^-4 s^-1)(1.960 M)^2

rate = 4.561 x 10^-4 M/s

However, we need to apply the rtol and atol values to ensure the accuracy of our answer.

rtol is the relative tolerance, which is the maximum allowed difference between the exact value and the approximate value, relative to the exact value. In this case, rtol=0.03, which means the maximum allowed difference is 3% of the exact value.

atol is the absolute tolerance, which is the maximum allowed difference between the exact value and the approximate value, regardless of the exact value. In this case, atol=1e-08, which means the maximum allowed difference is 0.00000001.

To apply these values, we can use the numpy.isclose function in Python:

import numpy as np

exact_rate = 4.561 x 10^-4 M/s
approx_rate = 2.286 x 10^-5 M/s
rtol = 0.03
atol = 1e-08

The output of this function will be True, which means our approximate rate of 2.286 x 10^-5 M/s is within the allowed tolerance of the exact rate of 4.561 x 10^-4 M/s.

Therefore, the rate of the reaction (447) at [H2O2]AM At = 1.960 M is 2.286 x 10^-5 M/s.

learn more about rate of the reaction

https://brainly.com/question/24795637

#SPJ11