Answer:
Below
Explanation:
Each exerts pressure proportional to its fraction of the total
total = .200 + .100 + .200 = .500 mol
argon is .200 of this
.200 / .500 * 5 atm = 2 atm
Arrange the following compounds in order of decreasing acidity: Rank from most acidic to least acidic: To rank items a5 equivalent; overlap them: Reset Help CH3C = CH CH,COOH CHzNHz CH,CHz CH;SOzH CHzSH CH;OH Most acidic Least acidic The correct ranking cannot be determined
The correct ranking cannot be determined. to determine the acidity of a compound, we need to compare the stability of the corresponding conjugate bases. However, the given compounds belong to different functional groups, and their corresponding conjugate bases differ in structure and stability.
Therefore, we cannot directly compare their acidities. Additionally, the position of substituents in the molecule can affect the acidity of the compound, making it difficult to determine a clear ranking. Therefore, we cannot establish a definitive ranking of the given compounds based on their acidity.
Learn more about acidity here:
https://brainly.com/question/14072179
#SPJ11
Consider the following system at equilibrium where Kc = 1.20×10-2 and ΔH° = 87.9 kJ/mol at 500K. PCl5(g) <=> PCl3(g) + Cl2(g) The production of PCl3(g) is favored by: (Indicated true (T) or false (F) for each of the following choices) 1. ____ Increasing the temperature 2. __ Increasing the pressure (by changing the volume) 3. _____ Decreasing the volume 4. _____ Adding PCl5 5. ______ Removing Cl2
1. True Increasing the temperature 2. False Increasing the pressure (by changing the volume) 3. True Decreasing the volume 4. False Adding PCl5 5. True Removing Cl2
1. True - According to Le Chatelier's principle, if the equilibrium constant is small, the forward reaction is endothermic. Therefore, increasing the temperature would shift the equilibrium towards the products, favoring the production of PCl3.
2. False - Changing the pressure by increasing the volume would shift the equilibrium towards the side with more moles of gas. In this case, there is no difference in the number of moles of gas on either side of the equation, so changing the pressure would not affect the equilibrium position.
3. True - Decreasing the volume would increase the pressure, which would favor the side with fewer moles of gas. In this case, there is only one mole of gas on the product side and two moles of gas on the reactant side, so decreasing the volume would favor the production of PCl3.
4. False - Adding more PCl5 would shift the equilibrium towards the side with more PCl5, favoring the production of Cl2 and PCl3.
5. True - Removing Cl2 would shift the equilibrium towards the products, favoring the production of PCl3.
For more such questions on temperature , Visit:
https://brainly.com/question/27988898
#SPJ11
The chemical reaction is PCl5(g) <=> PCl3(g) + Cl2(g)
where Kc = 1.20×10-2 and ΔH° = 87.9 kJ/mol at 500K
The production of PCl3(g) is favored by:
1. T - Increasing the temperature (since ΔH° is positive, the reaction is endothermic, and increasing the temperature will favor the endothermic reaction, thus producing more PCl3(g))
2. F - Increasing the pressure (by changing the volume) (this will favor the side with fewer moles of gas, which is the PCl5 side)
3. F - Decreasing the volume (this also increases the pressure, favoring the side with fewer moles of gas, which is the PCl5 side)
4. T - Adding PCl5 (according to Le Chatelier's principle, adding more PCl5 will shift the equilibrium to the right, increasing the production of PCl3(g))
5. T - Removing Cl2 (removing Cl2 will also shift the equilibrium to the right, favoring the production of PCl3(g))
Learn more about Le Chatelier's principle click here:
https://brainly.com/question/29009512
#SPJ11
A 0.033M solution of a weak acid (HA) has a pH of 4.11. What is the Ka of the acid
The concentration of hydrogen ions, conjugate base, and weak acid must be taken into account, as well as the degree of dissociation of the acid. In this case, the Ka of the weak acid is [tex]1.89 \times 10^{-6.[/tex]
To determine the Ka of a weak acid from its pH, it is necessary to use the equation for the acid dissociation constant:
Ka = [H+][A-]/[HA]
where [H+] is the concentration of the hydrogen ions, [A-] is the concentration of the conjugate base, and [HA] is the concentration of the weak acid.
In this problem, the pH of the solution is 4.11, which means that the concentration of [H+] can be calculated as follows:
pH = -log[H+]
4.11 = -log[H+]
[tex][H+] = 7.94 \times 10^{-5} M[/tex]
Since the acid is weak, it does not completely dissociate, so the concentration of [A-] can be assumed to be equal to [H+], and the concentration of [HA] is given as 0.033 M. Thus, the equation for Ka can be simplified as:
[tex]Ka = [H+]^2 / [HA]\\Ka = (7.94 \times 10^{-5})^{2} / 0.033\\Ka = 1.89 \times 10^{-6[/tex]
Therefore, the Ka of the weak acid is [tex]1.89 \times 10^{-6.[/tex]
For more question on degree of dissociation visit:
https://brainly.com/question/29908901
#SPJ11
how many kilograms of co₂ equivalents are emitted in the production and post-farmgate processing of 23 kg of pork?
Answer:The carbon footprint of pork varies depending on the location and the production methods used. On average, the carbon footprint of pork production is estimated to be around 3.8 kg CO2e per kg of pork.
So for 23 kg of pork, the total carbon footprint would be:
3.8 kg CO2e/kg * 23 kg = 87.4 kg CO2e
Therefore, approximately 87.4 kg of CO2 equivalents are emitted in the production and post-farmgate processing of 23 kg of pork.
learn more about equivalents
https://brainly.com/question/25197597?referrer=searchResults
#SPJ11
Looking at the nickel complexes as an example, it is found that those formed with ammonia give the complex [Ni(NH3)6]^2+ and when formed with ethylenediamine the complex [Ni(en)3)^2+ is the result. Even though both are octahedran complexes, why do you think that nickel is coordinated with six ammonia ligands in one case and only three ethylenediamine ligands in the other?
The coordination number (i.e. the number of ligands attached to the central metal ion) in a complex depends on a variety of factors, including the size of the ligand, its charge, its shape, and its ability to form stable bonds with the metal ion.
In the case of nickel complexes, the difference in coordination number between [Ni(NH3)6]^2+ and [Ni(en)3]^2+ can be attributed to the differences in the size and shape of the ligands.
Ammonia (NH3) is a relatively small and flexible ligand, with a lone pair of electrons that can form a coordinate bond with the nickel ion.
Because of its small size and flexibility, ammonia can approach the nickel ion from many different angles and can occupy all six of the available coordination sites around the nickel ion. This results in an octahedral complex with a coordination number of 6.
Ethylenediamine (en), on the other hand, is a larger and more rigid ligand, with two nitrogen atoms separated by a carbon chain.
Because of its larger size and rigid structure, ethylenediamine cannot approach the nickel ion from as many angles as ammonia, and it can only form three coordinate bonds with the nickel ion. This results in an octahedral complex with a coordination number of 3.
In summary, the difference in coordination number between [Ni(NH3)6]^2+ and [Ni(en)3]^2+ can be attributed to the differences in the size and shape of the ligands, which affect their ability to approach the central metal ion and form stable coordinate bonds.
To know more about number refer here
https://brainly.com/question/17429689#
#SPJ11
Draw structures for the alkene (or alkenes) that gives the following reaction product. Br Br2 2123 Br You do not have to consider stereochemistry . Submit more than one structure only if the structures are constitutional isomers.
The above structure represents one possible alkene that would give the specified reaction product. Other alkene isomers may also give the same product.
Provide the alkene (or alkene isomers) that would give the product "Br Br2 2123 Br" when reacted with bromine (Br2) without considering stereochemistry?I am unable to generate or provide visual images.
I can describe the reaction and provide you with the structural formula of the alkene that gives the specified reaction product.
When an alkene reacts with Br2 (bromine), it undergoes a halogenation reaction.
In this reaction, one bromine atom adds to each carbon atom of the alkene, resulting in the addition of a Br atom to each carbon and the formation of a vicinal dibromide product.
Based on the given reaction product "Br Br2 2123 Br," it suggests that two bromine atoms have been added to a carbon-carbon double bond, resulting in a vicinal dibromide.
The structural formula of the alkene that would give this product can be represented as follows:
CH2=CH-CH2-CH=CH2
In this structure, the double bond between the second and third carbon atoms is where the bromine atoms would be added to form the vicinal dibromide product.
Learn more about structure represents
brainly.com/question/29692235
#SPJ11
Draw a complete structure for a molecule with the molecular formula C2H3CL. • Explicitly draw all H atoms. • In cases where there is more than one answer, just draw one.
The molecular formula C2H3CL indicates that the molecule has 2 carbon atoms, 3 hydrogen atoms, and 1 chlorine atom.
To draw the structure, we start with the carbon atoms and connect them with a single bond. We then add the hydrogen atoms to satisfy the valency of each carbon atom. One carbon atom must have 2 hydrogen atoms attached to it, while the other carbon atom only needs one hydrogen atom.
Now we have C2H4, which is ethene. However, the presence of the chlorine atom means that one of the hydrogen atoms must be replaced with a chlorine atom. We can place the chlorine atom on either carbon atom, but let's choose the carbon atom that only has one hydrogen atom attached to it.
So the final structure is:
H H
| |
C=C
| |
Cl H
For more such questions on atoms
https://brainly.com/question/6258301
#SPJ11
One possible molecule with the molecular formula C2H3Cl is vinyl chloride (CH2=CHCl), which has two carbon atoms double-bonded to each other and single-bonded to one chlorine atom and one hydrogen atom each.
The molecular formula C2H3Cl indicates that the molecule contains two carbon atoms, three hydrogen atoms, and one chlorine atom. To draw the structure, we can start by placing the atoms in a way that satisfies the valency of each element. Carbon atoms can form up to four bonds, while hydrogen atoms can form only one bond, and chlorine atoms can form one or two bonds.
One possible molecule that satisfies these criteria is vinyl chloride (CH2=CHCl), which has two carbon atoms double-bonded to each other and single-bonded to one chlorine atom and one hydrogen atom each. The double bond between the two carbon atoms means that they share two pairs of electrons, while the single bonds between carbon and chlorine, and between carbon and hydrogen, mean that they share one pair of electrons each.
To make the structure more clear, we can draw the molecule in a way that shows the spatial arrangement of the atoms. In this case, the molecule has a linear shape, with the two carbon atoms and the chlorine atom lying in the same plane and the hydrogen atoms pointing outwards.
learn more about molecule here:
https://brainly.com/question/19556990
#SPJ11
Which ion would you expect to have the largest crystal field splitting delta ?
a. [Os(H2O)6]^2
b. [Os(CN)6]^3 c. [Os(CN)6]^4- d. [Os( H2O)6]^3+
[Os(CN)6]^3- is expected to have the largest CFS delta.
Crystal field splitting (CFS) is a phenomenon that occurs when transition metal ions are surrounded by ligands, resulting in the splitting of the degenerate d-orbitals into higher and lower energy levels. The size of the splitting is measured by delta (Δ), which is influenced by the electronic configuration and the identity of the ligands. The ligands' ability to cause a larger splitting is known as the spectrochemical series. The stronger the field of the ligand, the higher the CFS. Among the given ions, [Os(CN)6]^3- is expected to have the largest crystal field splitting delta. This is because cyanide (CN-) is a strong field ligand, and Os has a 5d^2 electronic configuration. The Os atom has seven d-electrons, and it has a formal charge of +3, making it more polarizable than the other Os ions. As a result, the electrons are pulled closer to the ligands, causing a greater splitting between the d-orbitals. Thus, [Os(CN)6]^3- is expected to have the largest CFS delta.
To know more about crystal field splitting visit: https://brainly.com/question/28304987
#SPJ11
For 6 points, a 0.50 liter solution of 0.10 M HF titrated to the half way point with a 0.10 M solution of NaOH. Determine the pH of the half way point. Use two significant figures in your final answer.
The pH at the half-way point is 3.17. The equation for the neutralization reaction between HF and NaOH: HF + NaOH -> NaF + H2O
At the half way point, half of the HF has reacted with NaOH, leaving half of it still in solution. This means that the concentration of HF has been reduced by half, so it is now 0.05 M. The reaction between HF and NaOH produces NaF and water, but NaF is a salt that does not affect the pH of the solution. So, we can focus on the remaining HF and the water.
HF + H2O -> H3O+ + F-
To determine the pH of the solution at the half way point, we need to calculate the concentration of H3O+ ions. We can use the equilibrium constant expression for the reaction above: Kw = [H3O+][OH-] = 1.0 x 10^-14
moles NaOH = concentration x volume = 0.10 M x 0.25 L = 0.025 mol
Kw = [H3O+][F-] / [HF]
1.0 x 10^-14 = [H3O+][0.05 M / 2] / 0.20 M
Solving for [H3O+] gives: [H3O+] = 2.5 x 10^-4 M
Finally, we can calculate the pH using the definition of pH:
pH = -log[H3O+] = -log(2.5 x 10^-4) = 3.60
The pH of the solution at the half way point of the titration is 3.60 (rounded to two significant figures).
pH = pKa + log ([A-]/[HA])
The pKa of HF. The Ka of HF is 6.8 x 10^-4, so the pKa is:
pKa = -log(Ka) = -log(6.8 x 10^-4) = 3.17
At the half-way point, [A-] = [HA], so the ratio [A-]/[HA] = 1. The log(1) is 0, so: pH = pKa + log(1) = 3.17 + 0 = 3.17
To know more about neutralization visit:-
https://brainly.com/question/15347368
#SPJ11
calculate the mass percent of nickel chlorate in a solution made by dissolving 0.265 g ni(clo3)2 in 10.00 g water
The mass percent of nickel chlorate in the solution is 2.57%. to calculate the mass percent, you first need to find the mass of the solution. The mass of the solution is the sum of the mass of nickel chlorate and the mass of water, which is 0.265 g + 10.00 g = 10.265 g.
Next, you can calculate the mass of nickel chlorate in the solution by subtracting the mass of water from the total mass of the solution: 10.265 g - 10.00 g = 0.265 g.
Finally, the mass percent of nickel chlorate can be calculated by dividing the mass of nickel chlorate by the total mass of the solution and multiplying by 100: (0.265 g / 10.265 g) x 100 = 2.57%.
Therefore, the mass percent of nickel chlorate in the solution is 2.57%.
Learn more about chlorate here:
https://brainly.com/question/20758434
#SPJ11
which of the actions would cause the molecules of a gas to get closer together?
Cooling the gas or increasing the pressure would cause the molecules of a gas to get closer together. The behavior of a gas can be explained using the kinetic molecular theory.
The Kinetic Molecular Theory provides a theoretical framework to understand the behavior of gases at the molecular level. According to this theory, gases consist of a large number of small particles (molecules or atoms) that are in constant random motion. These particles collide with each other and with the walls of the container in which the gas is contained.
When the pressure of a gas is increased, it means that more particles are contained in a given volume, and therefore, there are more collisions happening between the particles and with the walls of the container.
These collisions result in an increased force per unit area, which is what we measure as pressure. As the particles get closer together, the volume they occupy decreases, and the density of the gas increases.
Similarly, cooling a gas means that the particles have less kinetic energy and move more slowly. The particles' slower motion results in fewer collisions with the walls of the container, and the pressure decreases.
To know more about molecules, refer here:
https://brainly.com/question/1078183#
#SPJ11
Select the best synthetic scheme to form octanoic acid from 1-heptene. O 1) (a) BHZ/THF (b) H2O2/NaOH 2) HBr 3) Mg, ether 4) (a) CO, (b) H,0+ 01) HBO 2) Mg, ether 3) (a) CO, (b) H, 0+ 1) 4,0+ 2) K, C1,07, H,SO 1) (a) BH/THF (b) H2O,/NaOH 2) K, Cr,0,,H, SO4
The best synthetic scheme to form octanoic acid from 1-heptene is as follows:
1) (a) BH₃/THF (b) H₂O₂/NaOH
2) HBr (Hydrogen Bromide)
3) Mg, ether
4) (a) CO, (b) H₂O⁺
In this scheme:
1. 1 - heptene is first converted to 1-heptyl alcohol using hydroboration - oxidation (BH₃/THF followed by H₂O₂/NaOH).
2. Then, the alcohol is converted to 1 - bromoheptane by reacting it with HBr.
3. The Grignard reagent, 1-heptylmagnesium bromide, is formed by reacting 1-bromoheptane with Mg in an ether solvent.
4. Finally, the Grignard reagent is reacted with carbon monoxide (CO) followed by the addition of H₂O⁺ (acidic workup) to form octanoic acid.
Learn more about octanoic acid : https://brainly.com/question/15676614
#SPJ11
knowing the following: mp = 1.0073 amu, mn = 1.0087 amu, and me- = 0.00055 amu, calculate the energy released by the fusion of one mole of br-81 (mass = 80.9163 amu)
Using Einstein's equation, we can calculate the energy released by the fusion of one mole of br-81: E = Delta m * c² * Avogadro's number
E = -1.9885 amu * (2.998 x 10⁸ m/s)² * 6.022 x 10²³/mol
E = -3.17 x 10¹¹ J/mol
To calculate the energy released by the fusion of one mole of br-81, we need to first determine the mass of the products after fusion.
The fusion of br-81 involves the combination of a bromine atom with a hydrogen atom to form krypton-83 and a neutron. The mass of krypton-83 is 82.91413 amu (80.9163 amu + 1.0073 amu + 0.00055 amu) and the mass of the neutron is 1.0087 amu.
Therefore, the total mass of the products after fusion is 83.92283 amu (82.91413 amu + 1.0087 amu).
To calculate the energy released by fusion, we can use the famous Einstein's equation E = mc², where E is the energy, m is the mass, and c is the speed of light.
The change in mass during fusion is given by the difference between the mass of the reactants (br-81 and hydrogen) and the mass of the products (krypton-83 and neutron), which is:
Delta m = (mass of reactants) - (mass of products)
Delta m = (80.9163 amu + 1.0073 amu) - (82.91413 amu + 1.0087 amu)
Delta m = -1.9885 amu
The negative sign indicates that mass is lost during fusion.
Using Einstein's equation, we can calculate the energy released by the fusion of one mole of br-81:
E = Delta m * c² * Avogadro's number
E = -1.9885 amu * (2.998 x 10⁸ m/s)² * 6.022 x 10²³/mol
E = -3.17 x 10¹¹ J/mol
Note that the negative sign indicates that energy is released during fusion, as expected. The magnitude of the energy released is quite large, which highlights the potential of fusion as a source of energy.
To know more about energy, refer
https://brainly.com/question/13881533
#SPJ11
calculation of cu2 usiing measured cell potentialand the nernst equation
To calculate the concentration of Cu²⁺ in a solution using a measured cell potential and the Nernst equation, we need to know the standard reduction potential of the Cu²⁺/Cu couple, as well as the measured cell potential and the concentrations of the other species in the cell.
Assuming the standard reduction potential of the Cu²⁺/Cu couple is +0.34 V at 25°C, we can use the Nernst equation, Ecell = E°cell - (RT/nF)lnQ, to relate the measured cell potential to the concentration of Cu²⁺.
If the cell is a Cu²⁺/Cu half-cell and a reference hydrogen half-cell, and the measured cell potential is 0.62 V at 25°C, then we can write:
0.62 V = 0.34 V - (0.0257 V/K)(298 K)/(2)(96,485 C/mol)ln[Cu²⁺]
Solving for [Cu²⁺], we get:
[Cu²⁺] = 1.5 x 10⁻⁴ M
Therefore, the concentration of Cu²⁺ in the solution is approximately 1.5 x 10⁻⁴ M. Learn more about electrochemistry and the Nernst equation at
https://brainly.com/question/13043546
#SPJ11
This is the term used to characterize a group on a benzene that makes it more reactive.a. Aromaticb. Electron donating groupc. Electron Withdrawing groupd. Aliphatic
The term used to characterize a group on a benzene that makes it more reactive is "Electron Withdrawing Group" (EWG).
EWGs are typically characterized by their ability to withdraw electron density from the ring, which can make the benzene ring more susceptible to electrophilic attack.
Examples of EWGs include nitro (-NO2), carbonyl (-C=O), and cyano (-CN) groups.
To know more about refer benzene here
brainly.com/question/14525517#
#SPJ11
determine the mass of potassium in 34.8 g of ki .
The mass of Potassium in 34.8 g of Potassium Iodide is 8.20g.
To determine the mass of potassium (K) in 34.8 g of potassium iodide (KI), we can use the concept of molar mass and stoichiometry.
First, calculate the molar mass of KI, which is the sum of the molar masses of potassium (K) and iodine (I). Potassium has a molar mass of 39.10 g/mol, and iodine has a molar mass of 126.90 g/mol. The molar mass of KI is 39.10 g/mol + 126.90 g/mol = 166.00 g/mol.
Next, we can find the moles of KI in the given mass. Moles of KI = (34.8 g) / (166.00 g/mol) = 0.2096 moles.
Since the ratio of potassium to iodide in KI is 1:1, there are also 0.2096 moles of potassium present. Now, we can find the mass of potassium by multiplying the moles of potassium by its molar mass:
Mass of potassium (K) = (0.2096 moles) x (39.10 g/mol) = 8.1976 g
So, there are approximately 8.20 g of potassium in 34.8 g of potassium iodide (KI).
Know more about Molar mass here:
https://brainly.com/question/22997914
#SPJ11
A power plant uses 54 million Joules of chemical energy to produce 17 million Joules of electrical energy. What is the efficiency of this process
the efficiency of the process is approximately 31.48%. To calculate the efficiency of the power plant, we need to divide the output energy (electrical energy) by the input energy (chemical energy) and multiply the result by 100 to express it as a percentage.
Efficiency = (Output Energy / Input Energy) * 100
Given that the power plant produces 17 million Joules of electrical energy (output) using 54 million Joules of chemical energy (input), we can substitute these values into the formula:
Efficiency = (17 million J / 54 million J) * 100
Simplifying the expression:
Efficiency = (0.3148) * 100
Efficiency = 31.48%
Therefore, the efficiency of the process is approximately 31.48%. This means that around 31.48% of the input chemical energy is converted into useful electrical energy, while the remaining percentage is lost as waste heat or other forms of energy.
To learn more about percentage click here:brainly.com/question/30697911
#SPJ11
hwat are the equilibriu concnetreation of mg and co3 ions in a sturate solution of magnesiu crabonte at 25c? ksp = 3.5x10-8
The equilibrium concentration of Mg2+ and CO32- ions in a saturated solution of magnesium carbonate at 25°C is approximately 1.87x10^-4 M.
The balanced chemical equation for the dissolution of magnesium carbonate in water is:
MgCO3(s) ⇌ Mg2+(aq) + CO32-(aq)
The solubility product expression for magnesium carbonate is:
Ksp = [Mg2+][CO32-]
We can assume that the dissolution of magnesium carbonate in water is an equilibrium reaction, which means that the concentrations of the magnesium and carbonate ions in the solution are related to the solubility product constant by the following equation:
Qsp = [Mg2+][CO32-]
At equilibrium, Qsp = Ksp. Therefore:
Ksp = [Mg2+][CO32-] = 3.5x10^-8
Since magnesium carbonate is a strong electrolyte, we can assume that the concentration of Mg2+ ion is equal to the concentration of MgCO3 that dissolves. Let x be the equilibrium concentration of Mg2+ and CO32- ions in the solution. Therefore, we can write:
Ksp = [Mg2+][CO32-] = x^2
x = sqrt(Ksp) = sqrt(3.5x10^-8) = 1.87x10^-4 M
Click the below link, to learn more about Equilibrium Concentration:
https://brainly.com/question/16645766
#SPJ11
Calculate the mass of Na2O needed to release 105 kJ of heat energy according to the following reaction:
Na2O (s) + 2HI (g) → 2NaI (s) + H2O (l) ΔH = -502 kJ
13. 0 g
155 g
97. 4 g
24. 8 g
The mass of Na2O needed to release 105 kJ of heat energy is 97.4 g.
In the given reaction, the enthalpy change is -502 kJ when 1 mole of Na2O reacts with 2 moles of HI to produce 2 moles of NaI and 1 mole of H2O.
Using this information, we can calculate the enthalpy change for the given amount of heat energy as follows:
-502 kJ --> 1 mole Na2O
-105 kJ --> (105/502) mole Na2O [Using stoichiometry]
Therefore, the moles of Na2O required to release 105 kJ of heat energy is (105/502) mole. The molar mass of Na2O is 61.98 g/mol, so the mass of Na2O required can be calculated as:
Mass of Na2O = (105/502) mol x 61.98 g/mol = 97.4 g
Hence, the mass of Na2O needed to release 105 kJ of heat energy is 97.4 g.
Learn more about heat energy here.
https://brainly.com/questions/29210982
#SPJ11
reaction of nickel nitrate hexahydrate with ki and pph3
Ni(NO3)2·6H2O + 2KI + 3PPh3 → Ni(PPh3)3I2 + 6H2O + 2KNO3
The reaction of nickel nitrate hexahydrate with KI and PPh3 results in the formation of a nickel(II) complex with PPh3 b.
The reaction can be represented by the following balanced equation:
Ni(NO3)2·6H2O + 2KI + 3PPh3 → Ni(PPh3)3I2 + 6H2O + 2KNO3
In this reaction, the KI serves as a source of iodide ions (I-) which react with the nickel(II) ions (Ni2+) from nickel nitrate hexahydrate. The PPh3 (triphenylphosphine) acts as a ligand and coordinates with the nickel(II) ions, forming a coordination complex. The resulting complex is Ni(PPh3)3I2, where three PPh3 ligands are attached to the nickel atom along with two iodide ions. The reaction is typically carried out in a suitable solvent, such as ethanol or acetonitrile.
This reaction is an example of a coordination reaction, where ligands bind to a central metal ion to form a complex. The presence of PPh3 ligands enhances the stability and reactivity of the resulting nickel(II) complex. The reaction conditions and stoichiometry can be adjusted to control the formation and properties of the complex.
Know more about Ligands here:
https://brainly.com/question/31836087
#SPJ11
Calculate the [OH-] of each of the following solutions at 25°C. Identify each solution as neutral, acidic, or basic. Also calculate the pH and pOH of each of these solutions. a. [H+] = 1.0 x 10-7 M [OH-]= M The solution is pH = pOH = b. H+] = 8.3 x 10-16 M [OH]= M The solution is pH pOH =
To calculate the [OH-] of the given solutions, we can use the formula [H+][OH-] = 1.0 x 10^-14 (at 25°C). Using this formula, we can determine the [OH-] for each solution:
a. [H+] = 1.0 x 10^-7 M
[OH-] = 1.0 x 10^-14 / 1.0 x 10^-7 = 1.0 x 10^-7 M
Since [H+] and [OH-] are equal, the solution is neutral.
pH = -log[H+] = -log(1.0 x 10^-7) = 7
pOH = -log[OH-] = -log(1.0 x 10^-7) = 7
b. [H+] = 8.3 x 10^-16 M
[OH-] = 1.0 x 10^-14 / 8.3 x 10^-16 = 1.2 x 10^-9 M
Since [H+] < [OH-], the solution is basic.
pH = -log[H+] = -log(8.3 x 10^-16) = 15.08
pOH = -log[OH-] = -log(1.2 x 10^-9) = 8.92
In summary, the [OH-] of the first solution is 1.0 x 10^-7 M and it is neutral with a pH and pOH of 7. The [OH-] of the second solution is 1.2 x 10^-9 M and it is basic with a pH of 15.08 and a pOH of 8.92.
To know more about solutions visit:
https://brainly.com/question/30665317
#SPJ11
For a linear molecule of polyethylene of molar mass 119,980 g mol^-1 calculate: (a) the contour length of the molecule, (b) the end-to-end distance in the fully-extended molecule, and (c) the root-mean-square end-to-end distance according to the valence angle model. In the calculations, end groups can be neglected and it may be assumed that the C-C bonds are of length 0.154 nm and that the valence angles are 109.5 degree Comment upon the values obtained. Indicate, giving your reasoning, which of the very large number of possible conformations of the molecule is the most stable.
a) This gives contour length of 1.438μm.
b) This gives an end-to-end distance of 0.027 μm.
c) This gives a value of 0.016 μm.
Which conformation of the molecule is the most stable based on these values and why?(a) The contour length of the linear polyethylene molecule can be calculated by multiplying the number of repeating units in the molecule by the length of each unit. The molar mass of the molecule is given as 119,980 g/mol, and the molar mass of one repeating unit of polyethylene is 28.05 g/mol. Therefore, the number of repeating units in the molecule is 4,278. The length of each repeating unit can be calculated as the sum of the lengths of the two C-C bonds and the angle between them, using the law of cosines. This gives a contour length of 1.438 μm.
(b) The end-to-end distance in the fully-extended molecule can be calculated as the contour length divided by the square root of the number of repeating units. This gives an end-to-end distance of 0.027 μm.
(c) The root-mean-square end-to-end distance according to the valence angle model can be calculated as (3/5)^(1/2) times the end-to-end distance. This gives a value of 0.016 μm.
Based on the values obtained, it can be concluded that the linear polyethylene molecule is highly elongated. Among the very large number of possible conformations, the fully-extended conformation is likely the most stable, since it allows for maximum separation between the repeating units, thereby minimizing steric interactions.
Learn more about Polyethylene.
brainly.com/question/14553941
#SPJ11
Consider the following system at equilibrium where Kc = 9.52×10-2 and H° = 18.8 kJ/mol at 350 K. CH4 (g) + CCl4 (g) goes to 2 CH2Cl2 (g) The production of CH2Cl2 (g) is favored by: Indicate True (T) or False (F) for each of the following: 1. decreasing the temperature. 2. decreasing the pressure (by changing the volume). 3. increasing the volume. 4. removing CH2Cl2 . 5. removing CCl4 .
(1) decreasing the temperature- True, (2)decreasing the pressure (by changing the volume)-False, (3) increasing the volume-True, (4) removing CH2Cl2-False, (5) removing CCl4-False
According to Le Chatelier's principle, if a system at equilibrium is subjected to a change, the system will adjust to reestablish the equilibrium. The production of CH2Cl2 (g) is favored by decreasing the temperature and increasing the volume, and is disfavored by decreasing the volume, removing CH2Cl2, and removing CCl4.
1. True - Decreasing the temperature will shift the equilibrium towards the side with higher enthalpy, which in this case is the production of CH2Cl2 (g).
2. False - Decreasing the pressure (by changing the volume) will cause the system to shift towards the side with a higher number of moles, which in this case is the reactant side. Therefore, it will not favor the production of CH2Cl2 (g).
3. True - Increasing the volume will decrease the pressure and cause the system to shift towards the side with a higher number of moles, which in this case is the production of CH2Cl2 (g).
4. False - Removing CH2Cl2 will cause the system to adjust by producing more CH2Cl2 to reestablish the equilibrium, so it will not favor the production of CH2Cl2 (g).
5. False - Removing CCl4 will cause the system to adjust by producing more CCl4 to reestablish the equilibrium, so it will not favor the production of CH2Cl2 (g).
In summary, the production of CH2Cl2 (g) is favored by decreasing the temperature and increasing the volume, while it is disfavored by decreasing the volume, removing CH2Cl2, and removing CCl4.
To know more about equilibrium visit:
https://brainly.com/question/14186148
#SPJ11
A 50. 0 ml sample of gas is cooled from 119° C. If the pressure remains constant, what is the final volume of the gas?
To use Charles's Law, which states that at constant pressure, the volume of a gas is directly proportional to its temperature. Mathematically, Charles's Law can be expressed as V₁ / T₁ = V₂ / T₂
Where V₁ and T₁ are the initial volume and temperature of the gas, and V₂ and T₂ are the final volume and temperature of the gas, respectively. In this case, we are given that the initial volume (V₁) is 50.0 mL and the initial temperature (T₁) is 119°C. We need to find the final volume (V₂), but we don't have the final temperature (T₂) explicitly mentioned.
However, we are told that the pressure remains constant. When pressure is held constant, the ratio of volumes is directly proportional to the ratio of temperatures. Therefore, we can set up the following equation:
V₁ / T₁ = V₂ / T₂
Plugging in the known values:
50.0 mL / 119°C = V₂ / T₂
Now, we can solve for V₂ by rearranging the equation:
V₂ = (50.0 mL / 119°C) * T₂
Since we don't have the specific final temperature, we cannot calculate the final volume without additional information about the final temperature of the gas.
Learn more about Charles's Law here
https://brainly.com/question/14842720
#SPJ11
The release of carbon dioxide from the complete oxidation of pyruvate can pose problems for cells. What molecule can easily be formed from carbon dioxide that can serve as a one carbon donor and double as a biological buffer? A. Biotin B Acetate C. Glyceraldehyde 3-phosphate D. Glycine E. Bicarbonate
The molecule that can easily be formed from carbon dioxide and serve as a one-carbon donor while also doubling as a biological buffer is bicarbonate (E).
Bicarbonate (HCO3-) can accept a proton (H+) to become the weak acid carbonic acid (H2CO3), which can then dissociate into water and carbon dioxide (CO2).
Bicarbonate is an important component of the carbon dioxide-bicarbonate buffer system, which helps to maintain the pH of biological fluids.
Additionally, one-carbon groups can be transferred to tetrahydrofolate (THF) to form various intermediates in pathways such as nucleotide biosynthesis and amino acid metabolism.
To know more about molecule refer here
https://brainly.com/question/19922822#
#SPJ11
a 0.549 m solution of a weak base has a ph of 10.17 . what is the base hydrolysis constant, b , for the weak base?
To find the base hydrolysis constant, b, for the weak base, we first need to use the pH value to calculate the pOH of the solution. Since pH + pOH = 14 at 25°C, we can subtract the pH from 14 to find the pOH:
pOH = 14 - 10.17 = 3.83
We can use the pOH to calculate the hydroxide ion concentration, [OH⁻], in the solution. Since pOH = -log[OH⁻], we can rearrange the equation to solve for [OH⁻]:
[OH⁻] = 10^-pOH = 10^-3.83 = 6.34 x 10^-4 M
Since the solution contains a weak base, it will undergo hydrolysis in water to produce hydroxide ions and its conjugate acid. The equilibrium constant for this reaction is called the base hydrolysis constant, b, and is defined as:
b = [OH⁻][BH⁺]/[B]
where BH⁺ is the conjugate acid of the weak base and B is the concentration of the weak base. Since the weak base is the only source of hydroxide ions in the solution, we can assume that [OH⁻] = [BH⁺]. Therefore, we can simplify the equation to:
b = [OH-]² / [B] = (6.34 x 10⁻⁴)² / 0.549
b = 5.99 x 10⁻⁷
So the base hydrolysis constant, b, for the weak base is 5.99 x 10⁻⁷.
for more questions on base hydrolysis constant: https://brainly.com/question/31838919
#SPJ11
how many liters of h2 gas at stp are needed to completely saturate 100 g of glyceryl tripalmitoleate (tripalmitolein)?
Approximately 159.2 liters of H2 gas at STP are needed to completely saturate 100 g of glyceryl tripalmitolein.
The molar mass of tripalmitolein is 806.14 g/mol. Therefore, 100 g of tripalmitolein is equal to 0.124 mol. Each mole of tripalmitolein reacts with 3 moles of H2 to form 3 moles of glycerol and 3 moles of palmitoleic acid. Thus, to completely saturate 0.124 mol of tripalmitolein, 0.372 mol of H2 is required. At STP, 1 mol of gas occupies 22.4 L of volume. Therefore, 0.372 mol of H2 gas occupies 8.34 L of volume. Hence, approximately 159.2 liters of H2 gas at STP are needed to completely saturate 100 g of tripalmitolein. 159.2 liters of H2 gas at STP are needed to saturate 100 g of tripalmitolein, which requires 0.372 mol of H2 gas.
learn more about tripalmitolein here:
https://brainly.com/question/17134991
#SPJ11
If I react 100g of zinc with 120 grams of HCL what will
Be the limiting reagent
In the reaction between 100g of zinc and 120g of HCl, zinc is the limiting reagent, meaning it will be completely consumed while HCl will be in excess.
To determine the limiting reagent, we need to compare the moles of zinc and HCl.
First, we calculate the moles of each reactant by dividing their given masses by their respective molar masses. The molar mass of zinc (Zn) is approximately 65.38 g/mol, and the molar mass of HCl is approximately 36.46 g/mol.
For zinc: moles = mass / molar mass = 100 g / 65.38 g/mol ≈ 1.53 mol
For HCl: moles = mass / molar mass = 120 g / 36.46 g/mol ≈ 3.29 mol
Since the moles of zinc (1.53 mol) are smaller than the moles of HCl (3.29 mol), zinc is the limiting reagent. This means that zinc will be completely consumed in the reaction, and there will be an excess of HCl remaining after the reaction is complete.
Learn more about Limiting reagent here: brainly.com/question/31171741
#SPJ11
for the formation of your photchromic imine you use ammonium bromide. why? 2 reasons.
The use of ammonium bromide in the formation of photchromic imine has two main reasons: To increase the solubility of the imine: Photchromic imine is not very soluble in common solvents such as water or ethanol. However, the addition of ammonium bromide to the reaction mixture increases the solubility of the imine.
2. To catalyze the formation of the imine: Ammonium bromide also acts as a catalyst in the formation of the photchromic imine. This means that it speeds up the reaction between the amine and the aldehyde to form the imine. This is due to the fact that ammonium bromide can protonate the amine, making it more reactive towards the aldehyde. Additionally, the bromide ion can act as a nucleophile, attacking the carbonyl group of the aldehyde and facilitating the formation of the imine.
In summary, the use of ammonium bromide in the formation of photchromic imine is necessary to increase the solubility of the imine and catalyze the reaction between the amine and aldehyde.
To know more about ammonium bromide visit:-
https://brainly.com/question/31817489
#SPJ11
define a relation t from to as follows. for all real numbers to as means that . is t a function? explain
Based on the given definition of relation t, we can see that each element in A is mapped to a unique element in B. Therefore, t is a function.
The relation t from set A to set B is defined as follows: for all real numbers in set A, t maps each element in A to a unique element in B such that the value of the element in B depends solely on the value of the element in A.
To determine whether t is a function, we need to check if each element in A has a unique mapping to an element in B. If every element in A is mapped to a unique element in B, then t is a function. However, if there exists at least one element in A that is mapped to more than one element in B, then t is not a function. so t is function.
An object that can be counted, measured, or given a name is a number. As an illustration, the numbers are 1, 2, 56, etc.
It follows that:
The value is 1/8.
The fact is,
Positive, negative, fractional, square-root, and whole numbers are all represented on the number line as real numbers.
Rational numbers are the quotients or fractions of two integers.
Irrational numbers are decimal numbers that never end (without repetition). They are not able to be stated as a fraction of two integers. 41, 97, and 15 are three examples of irrational numbers.
Learn more about numbers here
https://brainly.com/question/10547079
#SPJ11