Answer: A small mailbag is released from a helicopter that is descending steadily at 1.53 m/s. Then,
a) after 4s, the speed of the mailbox will be, 40.73m/s downwards.
b)78.4m downwards.
c) v=37.67m/s downward. and d=78.4m downward.
Explanation: To find the answer, we need to know more about the equations of uniformly accelerated motion.
What are the equations of uniformly accelerated motion?The equations of uniformly accelerated motion under gravity are,[tex]v=u+at\\S=ut+\frac{1}{2}at^2\\ v^2-u^2=2aS\\S=\frac{v+u}{2}t[/tex]
How to solve the problem?a) speed of the mailbag after 4s,[tex]v=u+gt=-1.53-(9.8*4)=-40.73 m/s^2[/tex]
b) How far it is below the helicopter,[tex]d_1=ut+\frac{1}{2}gt^2=(-1.53*4)+\frac{-9.8*16}{2} =-84.52 m\\d_2=vt=-40.73*4=-162.92 m\\d=-162,92+84.52=-78.4m[/tex]
c) If the helicopter is rising steadily, then v and d will be,[tex]v=u+gt=1.53-(9.8*4)=-37.67 m/s[/tex]
[tex]d_1=ut+\frac{1}{2}gt^2=(1.53*4)+\frac{-9.8*16}{2} =-72.28 m\\ d_2=vt=-37.67*4=-150.68 m\\d=-150.68+72.28=-78.4 m[/tex]
Thus, we can conclude that, the answers to the question are, a) after 4s, the speed of the mailbox will be, 40.73m/s downwards.
b)78.4m downwards.
c) v=37.67m/s downward. and d=78.4m downward.
Learn more about the equation of uniformly accelerated motion here:
https://brainly.com/question/28044927
#SPJ4
A cylindrical region of radius R contains a uniform magnetic field, parallel to its axis, with magnitude that is changing linearly with time. If r is the radial distance from the cylinder axis, the magnitude of the induced electric field inside the cylindrical region is proportional to:
The induced electric field inside the cylindrical region is directly proportional to r
What is the electric field?
An electric field is the physical field that surrounds electrically charged particles and exerts a force on all other charged particles in the field.
When a loop of wire is placed in a time-varying magnetic field, an induced electric field arises. This induced electric field allows the flow of current in the loop. There is no potential associated with this induced electric field.Here. a magnetic field with magnitude linearly varies with time.
Radial distance = r
Area of this region, A = π*r^2
Let the induced electric field be E.
Magnetic flux:
∅(B) = B*A
Let the magnetic field be kt,
where k is some constant and t is time.
(B) = kt * (πr^2)
Using Maxwell's equation of electromagnetism,
[tex]\int\limits^a_b {E} \, dr = -\frac{d∅}{dt}[/tex]
[tex]E* 2\pi r = - \frac{d}{dr}(\pi k tr^{2} )[/tex]
[tex]E*2\pi r = -\pi kr^{2}[/tex]
[tex]E = - \frac{kr}{2}[/tex]
Hence
E ∝ r
The induced electric field is directly proportional to r
So, option 2 is correct.
Learn more about Maxwell's equation here
https://brainly.com/question/17053846
#SPJ4
Generating electricity has its risks, no matter what type of fuel is used. Identify which consequences are associated with generating electricity in a coal-fired power plant and which accompany nuclear power. Some risks may belong in both categories.
Power generation has to do with the process by which electricity is generated from various sources.
What are the risks of power generation?Power generation has to do with the process by which electricity is generated from various sources. Now we know that electricity is almost the driving force of several economies globally.
A coal fired power plant will lead to the burning of fossil fuels and the consequent release of CO2 into the atmosphere which leads to global warming. Also, the possibility of the release of SOx from the burring of coal could lead to acid rain.
In the case of nuclear sources, the disposal of the spent nuclear fuel presents a huge risk as well as the possibility of radioactive fallout and possible accident that could release tremendous amount of radiation.
Learn more about electricity
generation:
https://brainly.com/question/11641649
#SPJ1
____________ is the unit that measures the pressure or force that pushes the flow of electrons forward through a conductor.
Volt is the unit that measures the pressure or force that pushes the flow of electrons forward through a conductor.
When there is a circuit having a cell / battery , that cell/battery forms an electric field due to difference in voltages , and set a voltage of value equals to the difference in the voltage of two end of that cell/ battery . Because of which a electric field got set up in the conductor , which pushes electron to move inside the conductor . Unit of voltage is volt .
VOLT - A unit of electrical pressure (or electromotive force) which causes current to flow in a circuit. One volt is the amount of pressure required to cause one ampere of current to flow against one ohm of resistance. VOLTAGE - That force which is generated to cause current to flow in an electrical circuit.
Voltage is the pressure from an electrical circuit's power source that pushes charged electrons (current) through a conducting loop, enabling them to do work such as illuminating a light. In brief, voltage = pressure, and it is measured in volts (V).
To learn more about voltage here
https://brainly.com/question/13521443?referrer=searchResults
#SPJ4
Voltage is the unit that measures the pressure or force that pushes the flow of electrons forward through a conductor.
Voltage is the electrical potential, potential difference and electromotive force in meter , kilogram, second system.The standard unit of measurement used for the expression of voltage is volt which is represent by symbol "V".
High voltage cable is used for electric power transmission at high voltage.A cable that includes conductor and insulation. cable which are considered to be fully interested. That means that they have fully rated insulted system that will consist of insulation , semi-con layers.
To learn more about Voltage here
https://brainly.com/question/13521443
#SPJ4
A mass m is attached to an ideal massless spring. When this system is set in motion with amplitude a, it has a period t. What is the period if the amplitude of the motion is increased to 2a?.
Time period is T if increasing the amplitude to 2A
What is Time period?
The length of time during which an activity occurs or a condition remains.
The period of a spring-mass system is proportional to the square root of the mass and inversely proportional to the square root of the spring constant.
Formula of Time period, T:
[tex]T = 2\pi \sqrt{\frac{M}{k} }[/tex]
Where,
k is the spring constant
mass of system = M
Amplitude = A
Time period = T
Here,
The amplitude is doubled = 2A
Since from the formula we can say that, The Time period is not dependent on amplitude.
Increasing the amplitude implies increase in the restoring force. An increase in the restoring force means the mass is now accelerated to cover more distance in the same period.
So the restoring force cancels the effect of the increase in amplitude.
Hence,
Time period is T if increasing the amplitude to 2A
Learn more about time period here:
https://brainly.com/question/14051226
#SPJ4
Red laser light passes through a single slit to form a diffraction pattern. If the width of the slit is increased by a factor of two, what happens to the width of the central maximum?
If the width of the slit is increased by a factor of two , then the central maxima will get decreased by half.
since , width of the central maxima is inversely proportional to the width of the slit . Which implies if width of the slit get increased then width of the central maxima will get decreased and vice versa.
central maxima = (2 * wavelength * D) / width of the slit
= (2 * lambda * D) / d
if initially width of the slit = d
then, after increasing it by a factor of two it become = 2d
central maxima = (2 * lambda * D) / 2d
= (lambda * D) / d
If the width of the slit is increased by a factor of two , then the central maxima will get decreased by half.
Learn more about central maxima :
https://brainly.com/question/14279157?referrer=searchResults
#SPJ4
At a point in space an electric force acts vertically upward on an electrion, the directon of the electric field at that point is:____
Answer:
F = Q E force acting on charge Q due to field E
A positive electric field is directed from positive to negative.
An electron will be attracted to the positive terminal.
Thus if the electric force is upwards the direction of the field must be directed downwards, or
if F is positive and Q is negative E must also be negative or downwards.
(taking upwards as positive)
Astronomers and physicists now believe they know what is happening to the missing neutrinos from the Sun (the neutrinos that our theories say should be emerging from the Sun, but our experiments in that underground mine could not find). These neutrinos are:
The missing neutrinos from the sun had merely tranformed into muon and tau neutrinos escaped detection.Hardly interacting with other matter,neutrinos comes in three different types electron,muon,and tau.
Hence option (b) turning into different type of neutrino in a neutrino oscillation is correct
Disclaimer:The question given on the portal is incomplete .Here is the complete question .
Question :Astronomers and physicists now believe they know what is happening to the missing neutrinos from the Sun (the neutrinos that our theories say should be emerging from the Sun, but our experiments in that underground mine could not find). These neutrinos are:
a)not being produced by the Sun because our star's nuclear fusion period has ended
b)turning into a different type of neutrino in a neutrino oscillation
c)being converted to antimatter in the core of the Sun and being destroyed as they hit matter
d)changing course before they reach the Earth as they hit other neutrinos in space
Learn more from here: brainly.com/question/28098168
#SPJ4
Two forces of magnitude 10n and 20n acting at an angle of 30 degree. what will be the x component of their resultant force?
The resultant of the forces is 29 N. Option D
What is the resultant force?The resultant force is the force that acts in a given direction. Now we have two forces as enumerated in the question.
Thus;
Resultant = √(10)^2 + (20)^2 - [2 * 10 * 20 * cos (60 - 30))
Resultant = 29 N
Thus, the resultant of the forces is 29 N.
Learn more about resultant force:https://brainly.com/question/16380983
#SPJ1
Missing parts;
Two forces of magnitude 10N and 20N act on a body in directions making angles 30° and 60° respectively with x-axis what is the resultant force
A.17N
B. 19N
C. 23N
D. 29N
E. 37N
The holding coil on a hydromatic propeller feathering button switch holds a solenoid relay closed that applies power to the propeller?
An electric propeller is powered by a solenoid relay that is kept closed by the holding coil on a hydromatic propeller feathering button switch. It is a kind of feathering pump motor.
What does it mean to feather an engine?
If an engine needs to be turned off, the feather is used. The blades are rotated during feathering such that the extent to which a leader is virtually pointing in the flying direction. The propeller's aerodynamic forces cause a low drag state in this position. It is composed of a solenoid relay.What is meant by solenoid relay?
A form of relay designed to wirelessly change a stronger current is called a solenoid. A coil is utilized to create an electromagnetic environment when power is transferred through it, similarly to the tiny motorized cube relays, that efficiently open or shut the circuit.
Learn more about solenoids here:
https://brainly.com/question/15504705
#SPJ1
There may be installations where grounded conductors of different systems are installed within the same raceway, cable, or box. In these cases, it's imperative that the system-grounded conductors remain
A. separated.
B. disconnected.
C. spliced.
D. buried.
It is imperative that the system-grounded conductors remain buried and is denoted as option D.
What is a Conductor?This is referred as a substance which allows electricity and heat to flow through it and examples include metals.
These conductors have to be buried so as to prevent the risk of contact and electrocution of individuals thereby making it a safe method.
Read more about Conductor here https://brainly.com/question/492289
#SPJ1
what is Doppler effect
Doppler effect is the shift in frequency as the object gets near an object/person or far away from an object or person.
When the frequency of a police car is heard from far away, the frequency is low and long wave lengthsWhen the frequency of a police car is heard from near, the frequency is high and short-wave lengthsHope it helps!
Using the Left Hand Rule, if current points up and
the field is toward you, which way does the motion
point?
A. Left
B. Down
c. Up
D. Right
Using the left hand rule, if current points up and the field is toward you, the motion points up.
What is the left hand rule?The left hand rule states that if the thumb, the fore finger and the middle finger are held mutually perpendicular to each other, the thumb points in the direction motion, the middle finger points in the direction of current while the fore finger points in the direction of the magnetic field.
Thus using the left hand rule, if current points up and the field is toward you, the motion points up.
Learn more about left hand rule:https://brainly.com/question/20347569
#SPJ1
Supposing the half-life of element x to be 1 year, if you have a 100 gram sample of x, how much of element x would be left after 4 years? (do not use significant digits in answering this question.)
75 g
50 g
25 g
6.25 g
6.25 gram of element x would be left after 4 years.
What's half life of an element?Half - life is the time period of decay of an element to half of its initial number of nuclei.After n no. of half lives, no. of nuclei left in the sample is initial number of nuclei / 2^nWhat's the amount of 100 gm of element x left after 4 half lives ?Leftover amount of the element x = 100/2^4
= 100/16 = 6.25 gram
Thus, we can conclude that 6.25 gram of element x would be left after 4 years.
Learn more about the half life here:
brainly.com/question/15086552
#SPJ1
How did the magma get from the volcanic center to the locations where the laccoliths formed?
Laccolith magma (molten rock) rising through the Earth's crust begins to spread out horizontally, prying aside the host rock strata.
Laccoliths are not unusual in the Pine Valley Mountain desert location close to St. George, Utah. The stress of the magma is high enough that the overlying strata are compelled upward, giving the laccolith its dome-like form.
A laccolith is a frame of intrusive rock with a dome-shaped top surface and a degree base, fed through a conduit from under. A laccolith bureaucracy when magma (molten rock) rising thru the Earth's crust starts to unfold out horizontally, prying aside the host rock strata. The stress of the magma is excessive enough that the overlying strata are pressured upward, giving the laccolith its dome-like form.
A laccolith is a type of igneous intrusion, shaped when magma forces its manner upwards via the Earth's crust however cools and solidifies before attaining the surface. Laccoliths are outstanding from other igneous intrusions by way of their dome-shaped upper floor and level base.
Learn more about laccoliths here:-https://brainly.com/question/2018985
#SPJ4
The large, roughly circular, dark, and somewhat younger regions on the moon are called?
The large, roughly circular, dark, and somewhat younger regions on the moon are called Maria.
What is Maria?Lunar Maria are large, dark, basaltic plains on Earth's Moon. It was created by an ancient asteroid impacting the Moon on the far side and triggering some volcanic activity on the opposite side.
These are vast basins containing lava flows that are marked by craters, ridges, faults and straight and immersed valleys called rills. They are waterless. There are about 20 major areas of this type. Most of which include the largest located on the side of the Moon that always faces Earth.
These maria were the result of the melting and eruption of basaltic lava on the lunar surface 3.8 to 2.8 billion years ago. This type of lava was highly fluid under the Moon's weak gravitational field and spread over vast distances.
Thus, the large, roughly circular, dark, and somewhat younger regions on the moon are called Maria.
Learn more about Maria, here:
https://brainly.com/question/1968844
#SPJ2
the work done by the brakes during braking is equal to
Answer:
The amount of pressure delivered to them
Explanation:
A 1500 pound car is stopped in traffic on a hill that is at an incline of 10. Determine the force that is required to keep the car from rolling down the hill.
A 1500 pound car is stopped in traffic on a hill that is at an incline of 10. The force that is required to keep the car from rolling down the hill will be 1133.53 N.
When all the forces that act upon an object are balanced, then the object is said to be in equilibrium motion. The forces are considered to be balanced if the rightward forces are balanced by the leftward forces and the upward forces are balanced by the downward forces.
It can be observed from the diagram that in order resist the car to rolling down the hill we need to apply an equal and opposite force against the inclined force( that is mgsin(x)) to form an equilibrium position because rolling is associated with horizontal forces hence we need to apply force against the force which can drive down the car .
mass = 1500 pound = 680.39 kg
sin(10) = 0.17
F (counter force ) = m*g*sin(x)
= 680.39 * 9.8 * 0.17
= 1133.53 N
To learn more about equilibrium motion
herehttps://brainly.com/question/4749763?referrer=searchResults
#SPJ4
. A coil is wrapped with 400 turns of wire on the perimeter of a circular frame of radius 8.5cm. Each turn has the same area, equal to that of the frame. A uniform magnetic field is turned on perpendicular to the plane of the coil. This field changes at a constant rate from 10.0 to 80.0mT in a time of 20.0ms. What is the magnitude of the induced emf in the coil at the instant the magnetic field has a magnitude of 50.0mT
The emf in the coil when the magnetic field is 50.0 mT is 31.78 V.
What is emf?
According to Faraday's law of electromagnetism, the emf of a coil
is the negative of the rate of change of magnetic flux with respect to time.
The emf of a coil is given by the formula,
[tex]E=-\frac{d\phi}{dt}[/tex]
where E is the emf, dΦ is the change in flux and dt is the change in time.
Magnetic flux: The scalar product of the magnetic field B and the total area vector A perpendicular to it is called the magnetic flux. The magnetic flux for a circular coil with n number of turns is given by,
[tex]\phi=n\pi r^2B[/tex]
where r is the radius of the coil.
Substitute [tex]\phi=n\pi r^2B[/tex] in the above equation and solve it.
[tex]E=-\frac{d(n\pi r^2 B)}{dt}\\E=-n\pi r^2 \frac{dB}{dt}[/tex]
Where dB/dt is the rate of change in the magnetic field with respect to time.
Note: 1mT/ms= 1 T/s, 1 cm= 0.01 m and 1mT=0.001 T
Given the magnetic field changes from 10.0mT to 80.0mT, the change in magnetic field dB = 80-10=70mT. The time interval dt= 20.0ms. Therefore,
dB/dt = 70/ 20 =3.5mT/(ms)
dB/dt = 3.5 T/s
Substitute dB/dt= 3.5T/s, n=400, r=8.5 cm or r=0.085 m in the formula of E and solve it. Since the value of magnitude is positive, ignore the negative sign.
E=400*π*(0.085)^2*(3.5)
E=31.78 V
Since the rate of change of magnetic field is constant, so the magnitude of the emf of the coil will remain the same at all instants. Hence E=31.75 V when the magnitude of the magnetic field is 50.0 T
Learn more about emf here:
https://brainly.com/question/12974418
#SPJ4
compare and contrast the medical understanding of death (that you have read about and learned about in this chapter) and the popular, typical understanding of death. this is chapter 11 for forensics
The medical understanding of death is related to the scientific approach, and the popular understanding is related to the inclusive spiritual and cultural approaches.
What is death for science?Death occurs when an individual's cardiorespiratory and brain functions cease due to some factor, thus ending his life.
Popular understanding, on the other hand, is aligned with scientific knowledge, but it is also encompassing cultural and religious teachings, which define topics not proven by science, such as life after death for example.
Therefore, death is a delicate topic for society, and spirituality is the basis found for greater emotional comfort in individuals who suffer significant losses of loved ones.
Find out more about scientific knowledge here:
https://brainly.com/question/1729104
#SPJ1
At a certain time a particle had a speed of 80 m/s in the positive x direction, and 9.8 s later its speed was 20 m/s in the opposite direction. What was the average acceleration of the particle during this 9.8 s interval
The average acceleration of the particle in the time interval of 9.8 s is 10.204 m/s² opposite to the direction of motion.
Given:
Speed of particle, v₁ = 80 m/s (in positive x-direction)
Speed of particle, v₂ = -20 m/s (in opposite direction)
Time interval, Δt = 9.8 s
Calculation:
We know that, the average acceleration is given as:
a_avg = (v₂ - v₁)/ Δt - ( 1 )
Applying values in above equation we get:
a_avg = (v₂ - v₁)/ Δt
= (-20 m/s - 80 m/s) / (9.8 s)
= -10.204 m/s²
Therefore the average acceleration of the particle in the time interval Δt is 10.204 m/s² opposite to the direction of motion.
Learn more about average acceleration here:
https://brainly.com/question/27184422
#SPJ4
The basic principle behind the simple DC motor is that wires that carry experience when placed in regions of space that have
The principle of DC motor is based on Fleming’s left hand rule. i.e., the current carrying wires experiences a force when placed in region of space that have magnetic field.
According to Fleming’s left hand rule Stretch the thumb, forefinger, and middle finger of the left hand until they are parallel to one another. If the thumb is pointing in the direction of motion, or the force acting on the conductor, and the middle finger is pointing in the direction of the magnetic field, the forefinger is pointing in the direction of current flow.
An armature revolves inside a magnetic field of a DC motor. A DC motor's fundamental operating concept is based on the idea that whenever a current-carrying conductor is positioned inside a magnetic field, that conductor will experience mechanical force.
Learn more about DC motor here;
https://brainly.com/question/21593477
#SPJ4
A standard rum and cola will be absorbed faster than a 5-ounce glass of wine because.
Absorption of Rum and cola:
A standard rum and cola absorb faster than a 5-ounce glass of wine because carbonation causes the pyloric valve to relax.
What are Rum and Cola:
The second-most common alcoholic beverage in the world is rum and coke, which is very well-liked. Its widespread availability, low cost, and ease of preparation are what contribute to its appeal. It is easy to prepare and challenging to destroy because it can be produced with any quantity or type of rum. Due to the pyloric valve's relaxation caused by carbonation, alcohol like rum and coke is often absorbed more quickly than 5 ounces of wine.Absorption is accelerated by carbonation. Alcohol will enter the bloodstream more quickly when combined with carbonated drinks like Coca-Cola or tonic water.Learn more about the alcoholic beverages here,
https://brainly.com/question/9946739
#SPJ4
In a series lrc circuit, the frequency at which the circuit is at resonance is f0. If you double the resistance, the inductance, the capacitance, and the voltage amplitude of the ac source, what is the new resonance frequency?.
When you double capacitance and inductance, the new resonance frequency becomes halved.
What is Resonance frequency?
It is the natural frequency of an object where it tends to vibrate at a higher amplitude.
The resonance frequency of the LC series circuit is the frequency at which the capacity reactance is equal to inductive reactance.
The formula resonance frequency:
[tex]f_{0} = \frac{1}{2\pi \sqrt{LC} }[/tex]
where;
f0 is the resonance frequency
L is the inductance
C is the capacitance
here, if the capacitance and inductance are doubled, the new resonance frequency becomes;
[tex]f = \frac{1}{2\pi \sqrt{2L2C} }\\f = \frac{1}{2\pi \sqrt{4LC} }\\f = \frac{1}{2*2\pi \sqrt{LC} }\\f=\frac{1}{2} \frac{1}{2\pi \sqrt{LC} }\\f = \frac{1}{2} f_{0}[/tex]
Thus from the above equation for frequency,
When you double capacitance and inductance, the new resonance frequency becomes f(0) / 2.
Learn more about resonance frequency here:
https://brainly.com/question/15208335
#SPJ4
Earth orbits the sun at an average circular radius of about 149.60 million kilometers every 365.26 Earth days.
a) Determine the Earth’s average orbital speed expressed in kilometers per hours.
b) Based on the information given in this question, calculate the approximate mass of the Sun.
The Earth’s average orbital speed is 107226 Km/hr and the mass of the sun is 2.6 x [tex]10^{24}[/tex] Kg
What is angular speed ?
Angular speed is the rate of change of the angle turned through by the body with time taken. That is W = Ф / T
And the relationship between linear speed and angular speed is V = wr
Where
V = Linear speedW = Angular speedr = RadiusGiven that the earth orbits the sun at an average circular radius of about 149.60 million kilometers every 365.26 Earth days.
a) To determine the Earth’s average orbital speed, we will make use of the below formula to calculate angular speed
W = 2[tex]\pi[/tex]/T
W = (2 x 3.143) / (365.26 x 24)
W = 6.283 / 876624
W = 7.2 x [tex]10^{-4}[/tex] Rad/hr
The Earth’s average orbital speed V = Wr
V = 7.2 x [tex]10^{-4}[/tex] x 149.6 x [tex]10^{6}[/tex]
V = 107225.5 Km/hr
b) Based on the information given in this question, to calculate the approximate mass of the Sun, we will use Kepler's 3rd law
M = (4[tex]\pi ^{2}[/tex][tex]r^{3}[/tex]) / G[tex]T^{2}[/tex]
M = (4 x 9.8696 x 3.35 x [tex]10^{24}[/tex] ) / (6.67 x [tex]10^{-11}[/tex] x 7.68 x [tex]10^{11}[/tex])
M = 1.32 x [tex]10^{26}[/tex] / 51.226
M = 2.58 x [tex]10^{24}[/tex] Kg
Therefore, the Earth’s average orbital speed is 107226Km/hr approximately and the mass of the sun is 2.6 x [tex]10^{24}[/tex] Kg
Learn more about Angular speed here: brainly.com/question/22247460
#SPJ1
A 60 g golf ball is dropped from a level of 2 m high. It rebounds to 1.5 m. How much energy is lost? Group of answer choices 0.5 J 0.88 J 0.29 J 1 J
Answer: A 60 g golf ball is dropped from a level of 2 m high. It rebounds to 1.5 m. Energy loss will be 0.29J
Explanation: To find the correct answer, we have to know more about the Gravitational potential energy.
What is gravitational potential energy?The energy possessed by a body by virtue of its position in gravitational field of earth is called gravitational potential energy.The gravitational potential energy of a body at a height h with respect to the height h will be,[tex]U=mgh[/tex]
Expression for gravitational potential energy loss will be,[tex]E=U_i-U_f[/tex]
How to solve the problem?The total energy before the ball dropped will be,[tex]U_i=mgh_i=60*10^-3kg*9.8m/s^2*2m=1.176 J[/tex]
The total energy after when the ball rebounds to 1.5m will be,[tex]U_f=mgh_f=60*10^-3kg*9.8m/s^2*1.5m=0.882J[/tex]
The total energy loss will be,[tex]E=1.176-0.882=0.294J[/tex]
Thus, we can conclude that, the energy loss will be,0.294J.
Learn more about the gravitational potential energy here:
https://brainly.com/question/28044692
#SPJ4
An object moving with 108 km/h moves 400 m in 8 seconds. find the velocity attained by the object.
Answer:50ms-1
Explanation:use the formula v=d/t
in order to find the velocity,devide the distance with time taken.
since distance is 400 meters devide it with seconds whiuch gives us 50.
Martha is late for class, so she races her 75 kg body up a 4.0 meter flight of stairs in only 2.3 seconds. What is Martha’s power?
Group of answer choices
a. 1,300 W
b. 6,800 W
c. 130 W
d. 680 W
Martha's power is 1,300 W and is denoted as option A.
What is Power?This is defined as the amount of energy used or transferred per unit time and the S.I unit is Watts.
Power = Work/ time
Work = force × distance
= F = ma = 75kg× 10m/s² = 750N
Work = 750N × 4m = 3000J
Power = work/time = 3000J/ 2.3s ≈ 1300W
Read more about Power here https://brainly.com/question/1634438
#SPJ1
The diagram shows a device that uses radio waves. Two radio towers. The towers are equal distance apart with an arrow between them. The left tower is labeled X. The right tower is labeled Y. The arrow is pointing from Tower X to Tower Y. What is the role of the part in the diagram labeled Y
capture, amplify, and demodulate waves
Question is incomplete and image is not attached in the question. The required image is attached below, so the complete question is:
What is the role of the part in the diagram labeled Y?
modulate, amplify, and send out waves
capture, amplify, and demodulate waves
change the amplitude and frequency of waves
change the pulse and phase of waves.
What are Radio wave?An example of electromagnetic radiation is radio waves. The wavelength of a radio wave is substantially greater than that of visible light. Radio waves are widely used by people for communication. Both rectangular and circular antennas are used by this radio tower to send and receive radio frequency energy.
The radio receiver, also known as component Y in the figure, is what captures, amplifies, and demodulates radio waves.
The radio receiver uses an antenna to separate the necessary radio frequency signals and consists of an amplifier to boost the strength of the receiving signal. The information from the modulated wave is ultimately recovered by demodulators found in receivers.
to know more go to - https://brainly.com/question/17020457
#SPJ4
An airplane is flying on a bearing of 170° at 495 mph. Find the component form of the velocity of the airplane. Be sure to show and explain your work.
The horizontal component of the plane's velocity is 85.96 mph and the vertical component of the plane's velocity is 487.5 mph.
Component form of the velocity of the airplane
The component form of the velocity of the airplane includes both horizontal and vertical velocity and it is calculated as follows;
Vx = V cosθ
Vy = V sinθ
where;
Vx is horizontal component of the velocityVy is vertical component of the velocityθ is the angle of the velocity measured with respect to horizontal axisθ = 170 - 90 = 80⁰
Horizontal component of the velocityVx = 495 mph (cos 80)
Vx = 85.96 mph
Vertical component of the velocityVy = 495 mph (sin 80)
Vy = 487.5 mph
Thus, the horizontal component of the plane's velocity is 85.96 mph and the vertical component of the plane's velocity is 487.5 mph.
Learn more about components of velocity here: https://brainly.com/question/24949996
#SPJ1
Provided following are four different ranges of stellar masses. Rank the stellar mass ranges based on how many stars in each range you would expect to be born in a star cluster, from highest number to lowest number.
Highest to lowest number:
-less than 1 solar mass
-between 1 and 10 solar masses
-between 10 and 30 solar masses
-between 30 and 60 solar masses
What is Stellar masses ?Stellar mass is a phrase that is used by astronomers to describe the mass of a star.
It is usually enumerated in terms of the Sun's mass as a proportion of a solar mass ( M ☉). Hence, the bright star Sirius has around 2.02 M ☉.Stellar masses are not fixed, although they change for single stars only on long periods.Learn more about Stellar masses here:
https://brainly.com/question/1128503
#SPJ4