a stock had returns of 16 percent, 4 percent, 8 percent, 14 percent, -9 percent, and -3 percent over the past six years. what is the geometric average return for this time period?

Answer:

cube = axaxaxaxaxaxa

following 6x6x6x6x6x6x6 = 7776ft^3

Step-by-step explanation:

The identity [tex]3cos(2x)/cos^2(x) = 3cos^2(x)[/tex] is verified

First, we'll convert the left-hand side into sines and cosines:

3sec(x) - 3sin(x)tan(x)

= 3(1/cos(x)) - 3(sin(x)/cos(x))(sin(x)/cos(x))

[tex]= 3/cos(x) - 3sin^2(x)/cos^2(x)\\= (3cos^2(x) - 3sin^2(x))/cos^2(x)\\= 3(cos^2(x) - sin^2(x))/cos^2(x)\\= 3cos(2x)/cos^2(x)[/tex]

Now, we'll simplify the right-hand side:

[tex]3cos(x) - 3cos(x)sin^2(x)\\= 3cos(x)(1 - sin^2(x))\\= 3cos^2(x)\\[/tex]

Since [tex]3cos(2x)/cos^2(x) = 3cos^2(x)[/tex]when x is not equal to [tex]k*\pi/2[/tex] for any integer k, we can conclude that the identity is verified.

Learn more about verifying an identity

brainly.com/question/10285501

#SPJ11

The area of the region bounded by the curve and lying in the specified sector is (e^2 - 1)/6 square units.

To calculate the area of the region bounded by the given curve, we use the formula for finding the area of a polar region. This formula is expressed as (1/2)∫[a, b] r(θ)^2 dθ, where r(θ) represents the polar equation of the curve and [a, b] represents the interval of θ values that define the desired sector.

In this case, the polar equation is r = e/2, and the interval of θ values is [π/3, 3π/2]. Plugging these values into the area formula, we get (1/2)∫[π/3, 3π/2] (e/2)^2 dθ. Simplifying further, we have (1/2)∫[π/3, 3π/2] e^2/4 dθ.

Integrating this expression with respect to θ over the given interval and evaluating the definite integral, we obtain the area as (e^2 - 1)/6 square units.

Learn more about square units.

brainly.com/question/24102754

#SPJ11

Answer: To show that the curve passes through a point, we need to find a value of t that makes the parametric equations satisfy the coordinates of the point.

Let's first check if the curve passes through the point (1, 4, 0):

x = t^2, so when x = 1, we have t = ±1.

y = 1 - 3t, so when t = 1, we have y = -2.

z = 1 + t^3, so when t = 1, we have z = 2.

Therefore, the curve passes through the point (1, 4, 0).

Next, let's check if the curve passes through the point (9, -8, 28):

x = t^2, so when x = 9, we have t = ±3.

y = 1 - 3t, so when t = -3, we have y = 10.

z = 1 + t^3, so when t = 3, we have z = 28.

Therefore, the curve passes through the point (9, -8, 28).

Finally, let's check if the curve passes through the point (4, 7, -6):

x = t^2, so when x = 4, we have t = ±2.

y = 1 - 3t, so when t = 2, we have y = -5.

z = 1 + t^3, so when t = 2, we have z = 9.

Therefore, the curve does not pass through the point (4, 7, -6).

Hence, we have shown that the curve passes through the points (1, 4, 0) and (9, -8, 28) but not through the point (4, 7, -6).

The relation | on s = {1,2,3,4,6} is the set of ordered pairs {(1,1), (2,2), (3,3), (4,4), (6,6)}. To find all linear extensions of | on s, we need to add any pairs that would make the relation linear.

For a relation to be linear, it must satisfy the transitive property. That is, if (a,b) and (b,c) are both in the relation, then (a,c) must also be in the relation.

In this case, we can add the pairs (1,2), (2,3), (3,4), and (4,6) to make the relation linear. So the set of ordered pairs for the linear extension of | on s is:

{(1,1), (1,2), (2,2), (2,3), (3,3), (3,4), (4,4), (4,6), (6,6)}
To know more about liner extension visit:

https://brainly.com/question/2248255

#SPJ11

1.396 x 10²³ air molecules were released

In this problem, we have a tank of compressed air that is pressurized to 20.0 atm and a certain amount of air is released until the pressure drops to 15.0 atm. We need to find out the number of air molecules that were released.

To solve this problem, we can use the Ideal Gas Law, which states that the product of pressure, volume, and the number of moles of a gas is proportional to its temperature, expressed as PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the universal gas constant, and T is the absolute temperature.

We can use this equation to determine the number of moles of air in the tank before and after the release of air. We know the volume of the tank is 1.0 m³, and the initial pressure and temperature are 20.0 atm and 273 K, respectively.

Using the ideal gas law, we can calculate the number of moles of air in the tank as follows:

n₁ = (P₁ * V) / (R * T₁)

where P1 = 20.0 atm, V = 1.0 m³, R = 8.314 J/(mol*K), and T₁ = 273 K

n₁ = (20.0 * 1.0) / (8.314 * 273) = 0.927 mol

This means that there are 0.927 moles of air in the tank before releasing the air. Now we need to find the number of moles of air remaining in the tank after the release of air when the pressure drops to 15.0 atm. We can use the same equation and rearrange it to solve for n₂:

n₂ = (P₂ * V) / (R * T₂)

where P₂ = 15.0 atm and T₂ = 273 K

n₂ = (15.0 * 1.0) / (8.314 * 273) = 0.695 mol

So, the number of moles of air remaining in the tank after releasing the air is 0.695 mol.

To find the number of air molecules released, we need to subtract the number of moles of air remaining in the tank from the initial number of moles of air in the tank:

n = n₁ - n₂ = 0.927 - 0.695 = 0.232 mol

Finally, we can use Avogadro's number, which is 6.022 x 10²³ molecules/mol, to find the number of air molecules released:

Number of molecules released = n x Avogadro's number

Number of molecules released = 0.232 x 6.022 x 10²³

                                                    = 1.396 x 10²³ molecules

Therefore, approximately 1.396 x 10²³ air molecules were released

To know more about Avogadro's number here

https://brainly.com/question/28812626

#SPJ4

A tank of compressed air of volume 1.0 m^3 is pressurized to 20.0 atm at T=273k. A valve is opened and air is released until the pressure in the tank is 15.atm, then the number of air molecules released = (n1 - n2) * Avogadro's constant

To determine the number of air molecules released, we can use the ideal gas law equation:

PV = nRT

where:

P is the pressure of the gas

V is the volume of the gas

n is the number of moles of gas

R is the ideal gas constant (8.314 J/(mol·K))

T is the temperature in Kelvin

First, let's convert the given pressure from atm to pascals (Pa) since the ideal gas constant is commonly used with SI units:

20 atm = 20 * 1.01325 * 10^5 Pa = 2.0265 * 10^6 Pa

15 atm = 15 * 1.01325 * 10^5 Pa = 1.5199 * 10^6 Pa

Next, let's calculate the number of moles of gas initially in the tank using the initial conditions:

P1 = 2.0265 * 10^6 Pa

V = 1.0 m^3

T = 273 K

n1 = (P1 * V) / (R * T)

Now, let's calculate the number of moles of gas remaining in the tank after the air is released:

P2 = 1.5199 * 10^6 Pa

n2 = (P2 * V) / (R * T)

The number of air molecules released is equal to the initial number of moles minus the final number of moles:

Number of air molecules released = (n1 - n2) * Avogadro's constant

Avogadro's constant, denoted as NA, is approximately 6.02214 * 10^23 molecules/mol.

To know more about Avogadro's constant refer here:

https://brainly.com/question/31730278#

#SPJ11

(a) The orthogonal projection Ps: V + S from V onto S is a linear map. To prove this, we need to show that (au + Bu) - (a Ps(u) + BPs(v)) is orthogonal to S, where a and b are scalars, u and v are vectors in V, and Ps(u) and Ps(v) are the orthogonal projections of u and v onto S, respectively. (b) Assuming {V1, V2, ..., Vn} is an orthonormal basis for V and {V1, V2, ..., Vk} spans S, we need to find the matrix representation of Ps with respect to this basis.

(a) To show that Ps: V + S from V onto S is a linear map, we need to verify that it satisfies the properties of linearity. Let u and v be vectors in V, and let a and b be scalars. The orthogonal projection of u onto S is Ps(u), and the orthogonal projection of v onto S is Ps(v). We want to show that (au + Bu) - (a Ps(u) + BPs(v)) is orthogonal to S. To do this, we can show that their inner product with any vector in S is zero. Since the inner product is linear, we can distribute and factor out scalars to prove that (au + Bu) - (a Ps(u) + BPs(v)) is orthogonal to S. Therefore, Ps is a linear map.

(b) Assuming {V1, V2, ..., Vn} is an orthonormal basis for V, we can represent the vector u as a linear combination of the basis vectors: u = a1V1 + a2V2 + ... + anVn. The orthogonal projection of u onto S, Ps(u), is given by the sum of the projections of u onto each basis vector of S: Ps(u) = Ps(a1V1) + Ps(a2V2) + ... + Ps(anVn). Since the basis {V1, V2, ..., Vk} spans S, we only need to consider the projections of u onto the first k basis vectors. The matrix representation of Ps with respect to this basis is obtained by writing down the coefficients of the projections as entries in a matrix. Each column of the matrix represents the projection of the corresponding basis vector onto S.

Learn more about properties of linearity here:

https://brainly.com/question/28709894

#SPJ11

The value that correctly fills in the blank in the previous sentence is m∠L.

In an isosceles triangle, the angles opposite to the congruent sides are also congruent. Therefore, if △ABC≅△KLM, it implies that the corresponding angles of the two triangles are congruent. In this case, angle B in triangle ABC corresponds to angle L in triangle KLM. Hence, m∠B and m∠L are equal.

To understand this concept further, consider the side lengths and angles of the two congruent triangles. Since the triangles are congruent, their corresponding sides and angles are equal. In this scenario, if △ABC≅△KLM, it means that side AB is congruent to side KL, side BC is congruent to side LM, and side AC is congruent to side KM.

Additionally, angle A is congruent to angle K and angle C is congruent to angle M. Based on this, we can conclude that angle B in triangle ABC must be congruent to angle L in triangle KLM. Therefore, m∠B = m∠L.

Learn more about congruent here:

https://brainly.com/question/30596171

#SPJ11

The parenting style described, where parents set few controls on their children's television viewing, allowing freedom and individual limits without punishment, is referred to as a permissive parenting style. Correct option is C).

A permissive parenting style is characterized by parents who set few rules, limits, or controls on their children's behavior. In the context of television viewing, permissive parents give their children the freedom to set their own limits and make decisions regarding what they watch without imposing strict rules or regulations.

In this style, parents may prioritize their child's autonomy and independence, allowing them to make choices without much interference or guidance. They may be lenient when it comes to enforcing rules or punishing improper behavior related to television viewing.

Permissive parents typically have a more relaxed approach and may prioritize maintaining a positive and harmonious relationship with their children rather than strict control. While this approach allows children to have more freedom and independence, it may also lead to challenges in establishing discipline and boundaries.

Therefore, based on the given description, the parenting style exemplified is permissive, where parents set few controls on their children's television viewing and allow individual limits without punishment.

Learn more about parenting style here:

https://brainly.com/question/28260043

#SPJ11

The image vertices of KLMN under a 90° clockwise rotation are: K'(0, 0), L'(2, -5), M'(-5, -5), N'(-3, 0) which is option B.

To rotate a point (x, y) 90° clockwise, use the following formula:

(x', y') = (y, -x)

where (x', y') are the coordinates of the rotated point.

Using this formula, the image vertices of KLMN is deduced as follows:

- Vertex K(0, 0): (0, 0) is its own image under any rotation.

- Vertex L(5, 2): To rotate 90° clockwise, we have (x', y') = (2, -5).

Therefore, the image of L is L'(2, -5).

- Vertex M(5, -5): To rotate 90° clockwise, we have (x', y') = (-5, -5).

Therefore, the image of M is M'(-5, -5).

- Vertex N(0, -3): To rotate 90° clockwise, we have (x', y') = (-3, 0).

Therefore, the image of N is N'(-3, 0).

Thus, the image vertices of KLMN under a 90° clockwise rotation are:

K'(0, 0), L'(2, -5), M'(-5, -5), N'(-3, 0).

Therefore, the answer is (B) K′(0, 0), L′(2, −5), M′(−5, −5), N′(−3, 0).

learn more about vertices: https://brainly.com/question/28747454

#SPJ1

The amount withheld for benefits is $120, the amount withheld for retirement is $48, and the amount withheld for taxes is $96.

Given that Steven worked for a certain number of hours in a week which resulted in a gross income of $800. From this, a portion was withheld for benefits, retirement, and taxes.

The total amount withheld from Steven’s check was $264. The amount withheld for taxes was twice the amount withheld for retirement, and the amount withheld for benefits was $24 less than the sum of retirement and taxes. We can construct a system of equations that can be used to find the amount of benefits, retirement, and taxes, as follows:

Let x be the amount withheld for benefits Let y be the amount withheld for retirementLet z be the amount withheld for taxesThen we can get the following system of equations:

Equation 1: x + y + z = 264 (the total amount withheld from Steven's check was $264)

Equation 2: z = 2y (the amount withheld for taxes was twice the amount withheld for retirement)Equation 3: x = y + z - 24 (the amount withheld for benefits was $24 less than the sum of retirement and taxes)We can solve this system of equations by using substitution or elimination method.

Using substitution method:

Substitute Equation 2 into Equation 1 to get:

x + y + 2y = 264

Simplify:

x + 3y = 264Substitute Equation 3 into Equation 1 to get:

y + z - 24 + y + z = 264

Simplify:2y + 2z = 288 Substitute Equation 2 into the above equation to get:2y + 2(2y) = 288

Simplify:6y = 288

Divide both sides by 6 to get:y = 48

Substitute y = 48 into Equation 2 to get:

z = 2y = 2(48) = 96Substitute y = 48 into Equation 3 to get:x = y + z - 24 = 48 + 96 - 24 = 120

Therefore, the amount withheld for benefits is x = $120, the amount withheld for retirement is y = $48, and the amount withheld for taxes is z = $96.Therefore, the amount withheld for benefits is $120, the amount withheld for retirement is $48, and the amount withheld for taxes is $96.

To know more about taxes visit:

https://brainly.com/question/18170345

#SPJ11

Answer:

----------------

If one side of a square is 2a - b, then the area is:

So the area is 4a² - 4ab + b².

A 4x6 matrix is a rectangular array of numbers with 4 rows and 6 columns. The elements of the matrix are typically denoted by a letter with subscripts indicating the row and column.

The rank of a matrix is the dimension of the vector space spanned by its columns or rows. It is also equal to the number of linearly independent columns or rows of the matrix.

Since A is a 4x6 matrix, the largest possible value for the rank of A is min(4, 6), which is 4x4 identity matrix or 4 if there are 4 linearly independent rows or columns in A.

To find the rank of A, we can perform row operations on A to reduce it to row echelon form or reduced row echelon form. Row operations include adding a multiple of one row to another row, multiplying a row by a non-zero scalar, and swapping two rows.

After performing the row operations, the number of non-zero rows in the resulting matrix is the rank of A. Since the rank of a matrix is equal to the rank of its transpose, we can also perform column operations to find the rank of A.

Therefore, the answer is (a) 4, as it is the largest possible value for the rank of a 4x6 matrix.

To know more about 4x6 matrix visit:

https://brainly.com/question/31047345

#SPJ11

The given differential equation is a first-order nonlinear ordinary differential equation. We can solve this equation using the separation of variables method and apply the initial condition to find the particular solution. We can then use MATLAB to plot the solution over the domain (-3,5).

The given differential equation is:

[tex]dy/dx = (5y^2x^4 + y)dy[/tex]

We can rewrite this as:

[tex]y dy/(5y^2x^4 + y) = dx[/tex]

Integrating both sides [tex]gives:[/tex]

1/5 ln|5[tex]y^2x^4[/tex]+ y| = x + C

where C is the constant of integration. Solving for y and applying the initial condition[tex]y(0)[/tex] = 1, we get:

y(x) = 1/[tex]sqrt(5 - 4x)[/tex]

Using MATLAB, we can plot the solution over the domain (-3,5) as follows:

x = linspace(-3,5);

y = 1./sqrt(5-4*x);

plot(x,y)

[tex]xlabel('x')\\ylabel('y')[/tex]

title('Solution of dy/dx = (5y^2x^4 + y)/y with y(0) = 1')

The plot shows that the solution is defined for x in the interval (-3,5) and y is unbounded as x approaches 5/4 from the left and as x approaches -5/4 from the right. The plot also shows that the solution approaches zero as x approaches -3, which is consistent with the fact that the denominator of y(x) becomes infinite at x = -3.

Learn more about nonlinear here:

https://brainly.com/question/25696090

#SPJ11

To turn the equation y = -3x² - 4 into the vertex form, we need to complete the square. We use this formula to accomplish this task:

y = a(x - h)² + k,

where(h, k) is the vertex of the parabola and a is a nonzero coefficient of the squared term.

Now, let's start the solution to the given problem.

We are given the equation:

y = -3x² - 4

To complete the square, we must first factor out the coefficient of x², which is -3:

y = -3(x² + 4/3)

Next, we add and subtract

(4/3)² = 16/9

inside the parenthesis to the equation so that we have a perfect square:

y = -3(x² + 4/3 + 16/9 - 16/9) y = -3[(x + 2/3)² - 16/9]

Simplifying, we get:

y = -3(x + 2/3)² + 16/3

Therefore, the required adjustment that would turn the equation

y = -3x² - 4

into the vertex form is to complete the square.

To know more about equation, visit:

https://brainly.com/question/29657983

#SPJ11

The maximum value of f(x, y, z) is 250.

To find the maximum value of f(x, y, z), we can use the method of Lagrange multipliers, to find the highest value of given expression.

First, we form the Lagrangian function L(x, y, z, λ) = 5xy + 5xz + 5yz - xyz - λ(x + y + z - 1).

Taking partial derivatives with respect to x, y, z, and λ, and setting them equal to zero, we can solve for the critical points.

After finding these critical points, we can evaluate the function f(x, y, z) at each point and determine the maximum value. In this case, the maximum value is 250.

Learn more about Lagrange multipliers

brainly.com/question/30776684

#SPJ11

The assertion is not reasonable because $2800 is not close to the mean difference. The correct option is C.

A confidence interval provides a range of values within which we can be reasonably confident that the true population parameter lies. It is constructed based on sample data and takes into account the variability of the data.

In this case, the national magazine claims that public institutions charge state residents an average of $2800 less for tuition each semester. To evaluate this assertion, we need to consider the confidence interval.

If the confidence interval for the mean difference in tuition does not include $2800, it suggests that the true population mean difference is significantly different from $2800. This would cast doubt on the validity of the magazine's claim.

Option C states that the assertion is not reasonable because $2800 is not close to the mean difference. This aligns with the interpretation of the confidence interval.

If $2800 is far from the mean difference, it indicates that the magazine's claim is not supported by the confidence interval.

Options A, B, and D imply that the assertion is reasonable or valid, which is not supported by the information provided. Therefore, they are incorrect.

Therefore, the correct answer is C. The assertion is not reasonable because $2800 is not close to the mean difference.

To know more about confidence interval refer here :

https://brainly.com/question/14056264#

#SPJ11

The concentration of a drug, denoted by c(t), is given by the function c(t) = [tex]0.1t^{2/11}[/tex], where t is the time in hours after the drug is injected.

To find the time when the concentration is at its maximum, we need to determine the critical points of the function by taking the first derivative and setting it equal to zero.
The first derivative of c(t) with respect to t is:
c'(t) = [tex]\frac{d}{dt}[/tex] [tex]0.1t^{2/11}[/tex] =[tex]\frac{0.1}{11}[/tex] x 2t = [tex]\frac{0.2t}{11}[/tex]
To find the critical points, set c'(t) equal to zero and solve for t:
[tex]\frac{0.2t}{11}[/tex] = 0
t = 0
Since there is only one critical point, t = 0, this is the time when the concentration is at its maximum. However, this answer indicates that the concentration is at its maximum immediately after the drug is injected. This result may be due to the simplified model used to describe the concentration of the drug. In conclusion, according to the given function, the concentration of the drug is at its maximum at t = 0 hours, immediately after being injected. The answer is accurate to at least two decimal places (t = 0.00 hours).

learn  more about derivatives here:

https://brainly.com/question/25324584

#SPJ11

The percentage change in the average cost of a gallon of gas in 2014 was 30%. This means that the cost of a gallon of gas decreased by 30% from January to December 2014.

To calculate the percentage change in the average cost of a gallon of gas in 2014, we have to use the formula for percentage change, which is

= (new value - old value) / old value * 100

The old value, in this case, is the average cost of a gallon of gas in January 2014, which is $3.42, and the new value is the average cost of a gallon of gas in December 2014, which is $2.36. When we substitute these values into the formula, we get

=  ($2.36 - $3.42) / $3.42 * 100

= -30.4%.

This means that there was a decrease of 30.4% in the average cost of a gallon of gas from January to December in 2014. However, we are supposed to round to the nearest percent. Since the hundredth place is 0.4, greater than or equal to 0.5, we round up the tenth place, giving us -30.0%.

Since we are asked for the percentage change, we drop the negative sign and conclude that the percentage change in the average cost of a gallon of gas in 2014 was 30%. The percentage change in the average cost of a gallon of gas in 2014 was 30%.

This means that the cost of a gallon of gas decreased by 30% from January to December 2014. We rounded the result to the nearest percent, which gave us -30.0%, but since we are interested in the percentage change, we dropped the negative sign to get 30%.

To know more about the percentage change, visit:

brainly.com/question/31643226

#SPJ11

The pair of adjacent angles in this figure is Angle KOL and angle LOM.

A pair of adjacent angles refers to two angles that share a common vertex and a common side between them. In this figure, a line passes through points K, O, and N, while two rays, OL and OM, rise from the point O in different directions. To find a pair of adjacent angles, we can look for two angles that share a common vertex and a common side between them.

Looking at the figure, we can see that angles KOL and LOM share a common vertex at O and a common side OL. Therefore, angles KOL and LOM are a pair of adjacent angles.

Option A, Angle KOL and angle LOM, is the correct answer. Option B, Angle KOL and angle MON, is incorrect because there is no angle MON in the figure. Option C, Angle KOM and angle LON, is also incorrect because KOM and LON do not share a common vertex. Option D, Angle LOM and angle LON, is incorrect because LOM and LON do not share a common side.

Learn more about vertex at: brainly.com/question/13921516

#SPJ11

For the given op amp circuit with v0 = 0 and upsilons = 3 V, the value of upsilon(t) for t > 0 can be calculated using the concept of virtual ground and voltage divider rule.

In the given circuit, since v0 = 0, the non-inverting input of the op amp is connected to ground, which makes it a virtual ground. Therefore, the inverting input is also at virtual ground potential, i.e., it is also at 0V. This means that the voltage across the 1 kΩ resistor is equal to upsilons, i.e., 3 V. Using the voltage divider rule, we can calculate the voltage across the 2 kΩ resistor as:

upsilon(t) = (2 kΩ/(1 kΩ + 2 kΩ)) * upsilons = (2/3) * 3 V = 2 V

Hence, the value of upsilon(t) for t > 0 is 2 V. The output voltage v0 of the op amp is given by v0 = A*(v+ - v-), where A is the open-loop gain of the op amp, and v+ and v- are the voltages at the non-inverting and inverting inputs, respectively. In this case, since v- is at virtual ground, v0 is also at virtual ground potential, i.e., it is also equal to 0V. Therefore, the output of the op amp does not affect the voltage across the 2 kΩ resistor, and the voltage across it remains constant at 2 V.

Learn more about divider rule here:

https://brainly.com/question/9264846

#SPJ11

If the series ∑an and ∑bn are both convergent series with positive terms, then the series ∑anbn is also convergent.

This can be proven using the Comparison Test for series convergence. Since an and bn are both positive terms, we can compare the series ∑anbn with the series ∑an∑bn.

If ∑an and ∑bn are both convergent, then their respective partial sums are bounded. Let's denote the partial sums of ∑an as Sn and the partial sums of ∑bn as Tn.

Then, we have:

0 ≤ Sn ≤ M1 for all n (Sn is bounded)

0 ≤ Tn ≤ M2 for all n (Tn is bounded)

Now, let's consider the partial sums of the series ∑an∑bn:

Pn = a1(T1) + a2(T2) + ... + an(Tn)

Since each term of the series ∑anbn is positive, we can see that each term of Pn is the product of a positive term from ∑an and a positive term from ∑bn.

Using the properties of the partial sums, we have:

0 ≤ Pn ≤ (M1)(Tn) ≤ (M1)(M2)

Hence, if ∑an and ∑bn are both convergent series with positive terms, then ∑anbn is also convergent.

Therefore, the given statement is True.

learn more about convergent series here : brainly.com/question/32202517

#SPJ11

The required percentage increase is 81%.We need to increase the sample size by 81%.

Suppose a random sample of size n is required to produce a margin of error of[tex]$\pm E$.[/tex]

The margin of error is given by the formula :

[tex]$E=\frac{z_{\frac{\alpha}{2}}\sigma}{\sqrt{n}}$$\frac{z_{\frac{\alpha}{2}}\sigma}{E}=\sqrt{n}$.[/tex]

The above equation  is considered as equation(1)

So, for margin of error

[tex], $\pm\frac{9}{10}E$,$\frac{z_{\frac{\alpha}{2}}\sigma}{\frac{9}{10}E}=\sqrt{n_1}$[/tex]

The above equation  is considered as equation (2)

Divide equation (2) by (1) to find the increase in percent.

[tex]$\frac{\frac{z_{\frac{\alpha}{2}}\sigma}{\frac{9}{10}E}}{\frac{z_{\frac{\alpha}{2}}\sigma}{E}}=\frac{\sqrt{n_1}}{\sqrt{n}}$ $ \Rightarrow\frac{1}{\frac{9}{10}}=\frac{\sqrt{n_1}}{\sqrt{n}}$$\Rightarrow\frac{\sqrt{n}}{\sqrt{n_1}}=\frac{10}{9}$ $\Rightarrow\frac{n}{n_1}=\left(\frac{10}{9}\right)^2$$\Rightarrow\frac{n_1}{n}=\frac{81}{100}$[/tex]

We need to increase the sample size by

[tex]$\frac{n_1}{n}=\frac{81}{100}=81\%$[/tex]

To know more about sample size,visit:

https://brainly.com/question/30100088

#SPJ11

The comparison operation is true for x = 0 and x = 10.

The boolean comparison operation (x >= 10) and (not (x < 20)) and (x == 0) is true for the numbers x = 0 and x = 10.

Here's the explanation for each number:

For x = 0:

(x >= 10) is false because 0 is not greater than or equal to 10.

(not (x < 20)) is true because 0 is not less than 20 (the negation of the statement "0 is less than 20" is true).

(x == 0) is true because 0 is equal to 0.

Since one of the conditions is false ((x >= 10)), the entire boolean expression is false.

For x = 10:

(x >= 10) is true because 10 is equal to 10.

(not (x < 20)) is true because 10 is not less than 20 (the negation of the statement "10 is less than 20" is true).

(x == 0) is false because 10 is not equal to 0.

Since one of the conditions is false ((x == 0)), the entire boolean expression is false.

Therefore, the comparison operation is true for x = 0 and x = 10.

Your question is incomplete but this is the general answer

Learn more about boolean at https://brainly.com/question/31687138

#SPJ11

The survey question "Why is drinking soda bad for you?" is biased because it assumes that drinking soda is bad for you, which may not be true for everyone.

The question is leading and may influence respondents to answer in a particular way, which could result in biased data. A better wording for the question could be "What are your thoughts on the health effects of drinking soda?" This question is more neutral and does not assume that drinking soda is bad for you. It allows respondents to express their own opinions, whether they believe soda is harmful or not. This wording is more likely to produce unbiased data as it does not influence respondents to answer in a particular way.

Learn more about drinking soda here

https://brainly.com/question/29575832

#SPJ11

The valid argument, considering the transitive property of logic, is given as follows:

If Alicia goes to the movies, then Monty goes to the movies.

If Monty goes to the movies, then Tina goes to the movies.

Therefore, if Alicia goes to the movies, then Tina goes to the movies.

The summary of the transitive property of logic is given as follows:

"If a then b and b then c, a then c is a valid argument".

The parameters for the valid statement in this problem are given as follows:

More can be learned about the transitive property at https://brainly.com/question/2437149

#SPJ1

The volume of the given solid is 2592π.

We need to find the volume of the solid enclosed by the paraboloids

y = x^2 + z^2 and y = 72 − x^2 − z^2.

By symmetry, the solid is symmetric about the y-axis, so we can use cylindrical coordinates to set up the triple integral.

The limits of integration for r are 0 to √(72-y), the limits for θ are 0 to 2π, and the limits for y are 0 to 36.

Thus, the triple integral for the volume of the solid is:

V = ∫∫∫ dV

= ∫∫∫ r dr dθ dy (the integrand is 1 since we are just finding the volume)

= ∫₀³⁶ dy ∫₀²π dθ ∫₀^(√(72-y)) r dr

Evaluating this integral, we get:

V = ∫₀³⁶ dy ∫₀²π dθ ∫₀^(√(72-y)) r dr

= ∫₀³⁶ dy ∫₀²π dθ [(1/2)r^2]₀^(√(72-y))

= ∫₀³⁶ dy ∫₀²π dθ [(1/2)(72-y)]

= ∫₀³⁶ dy [π(72-y)]

= π[72y - (1/2)y^2] from 0 to 36

= π[2592]

Therefore, the volume of the given solid is 2592π.

Learn more about solid here:

https://brainly.com/question/17061172

#SPJ11

The notation C(n, r) represents the combination function, which calculates the number of ways to choose r items from a set of n items without regard to their order.

The formula for combinations is:

C(n, r) = n! / (r! * (n - r)!)

Now, let's calculate the values of the quantities:

a) C(9, 4):

C(9, 4) = 9! / (4! * (9 - 4)!)

       = 9! / (4! * 5!)

       = (9 * 8 * 7 * 6) / (4 * 3 * 2 * 1)

       = 126

Therefore, C(9, 4) is equal to 126.

b) C(10, 10):

C(10, 10) = 10! / (10! * (10 - 10)!)

         = 10! / (10! * 0!)

         = 1

Therefore, C(10, 10) is equal to 1.

c) C(10, 0):

C(10, 0) = 10! / (0! * (10 - 0)!)

        = 10! / (0! * 10!)

        = 1

Therefore, C(10, 0) is equal to 1.

d) C(10, 1):

C(10, 1) = 10! / (1! * (10 - 1)!)

        = 10! / (1! * 9!)

        = 10

Therefore, C(10, 1) is equal to 10.

e) C(9, 5):

C(9, 5) = 9! / (5! * (9 - 5)!)

       = 9! / (5! * 4!)

       = (9 * 8 * 7 * 6) / (4 * 3 * 2 * 1)

       = 126

Therefore, C(9, 5) is equal to 126.

To know more about combinations refer here:

https://brainly.com/question/28042664#

#SPJ11

The p-value for the given test statistic of 2.5 in a test of whether or not the population average salary of males is significantly greater than that of females is 0.0124 (option b).

The p-value is the probability of obtaining a test statistic as extreme as the one observed, assuming that the null hypothesis is true. In this case, the null hypothesis would be that the population average salary of males is not significantly greater than that of females. A p-value of 0.0124 indicates that there is a 1.24% chance of obtaining a test statistic as extreme as 2.5, assuming the null hypothesis is true. Since this p-value is less than the typical alpha level of 0.05, we can reject the null hypothesis and conclude that the population average salary of males is significantly greater than that of females.

Learn more about population here

https://brainly.com/question/29885712

#SPJ11

The amount of kilowatts consumed by a randomly chosen house in the month of February is a continuous random variable since it can take on any non-negative value within a certain range (e.g., 0 to infinity) and can be measured with any level of precision.

#SPJ11